[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#529261: linux-image-2.6.26-2-686: kernel panic with option selinux=1 in to grub/menu.lst



Package: linux-image-2.6.26-2-686
Version: 2.6.26-15lenny2
Severity: critical
Justification: breaks unrelated software

After security upgrading linux-image-2.6.26-2-686, system no booting with options selinux=1 in to 
/boot/grub/menu.lst. I'm get message Kernel panic.
Kernel linux-image-2.6.26-2-686 booting without problem.

config grub:
title           Debian GNU/Linux, kernel 2.6.26-2-686
root            (hd0,0)
kernel          /boot/vmlinuz-2.6.26-2-686 root=/dev/hda1 ro selinux=0 quiet vga=773 nosplash
initrd          /boot/initrd.img-2.6.26-2-686

title           Debian GNU/Linux, kernel 2.6.26-2-686 (single-user mode)
root            (hd0,0)
kernel          /boot/vmlinuz-2.6.26-2-686 root=/dev/hda1 ro selinux=0 single nosplash
initrd          /boot/initrd.img-2.6.26-2-686

title           Debian GNU/Linux, kernel 2.6.26-1-686
root            (hd0,0)
kernel          /boot/vmlinuz-2.6.26-1-686 root=/dev/hda1 ro selinux=1 quiet vga=773 nosplash
initrd          /boot/initrd.img-2.6.26-1-686

title           Debian GNU/Linux, kernel 2.6.26-1-686 (single-user mode)
root            (hd0,0)
kernel          /boot/vmlinuz-2.6.26-1-686 root=/dev/hda1 ro selinux=1 single
initrd          /boot/initrd.img-2.6.26-1-686

config selinux:
# This file controls the state of SELinux on the system.
# SELINUX= can take one of these three values:
# enforcing - SELinux security policy is enforced.
# permissive - SELinux prints warnings instead of enforcing.
# disabled - No SELinux policy is loaded.
SELINUX=permissive
# SELINUXTYPE= can take one of these two values:
# default - equivalent to the old strict and targeted policies
# mls     - Multi-Level Security (for military and educational use)
# src     - Custom policy built from source
SELINUXTYPE=default
# SETLOCALDEFS= Check local definition changes
SETLOCALDEFS=0

-- Package-specific info:
** Version:
Linux version 2.6.26-2-686 (Debian 2.6.26-15lenny2) (dannf@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Mon May 11 19:00:59 UTC 2009

** Command line:
root=/dev/hda1 ro selinux=0 quiet vga=773 nosplash

** Not tainted

** Kernel log:
[    8.016605] input: Lid Switch as /class/input/input5
[    8.035451] ACPI: Lid Switch [LID]
[    8.035549] input: Power Button (CM) as /class/input/input6
[    8.060103] ACPI: Power Button (CM) [PWRB]
[    8.060732] ACPI: AC Adapter [ADP1] (on-line)
[    8.088045] ACPI: Battery Slot [BAT1] (battery present)
[    8.615126] ACPI: device:0f is registered as cooling_device2
[    8.615305] input: Video Bus as /class/input/input7
[    8.640130] ACPI: Video Device [VGA] (multi-head: yes  rom: yes  post: no)
[    8.724405] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    8.727794] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    8.788553] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
[    8.788628] iTCO_wdt: Found a ICH4-M TCO device (Version=1, TCOBASE=0xd860)
[    8.788654] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    8.929599] intel_rng: FWH not detected
[    9.056336] ACPI: PCI Interrupt 0000:00:1f.6[B] -> GSI 17 (level, low) -> IRQ 17
[    9.056361] PCI: Setting latency timer of device 0000:00:1f.6 to 64
[    9.099098] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 17
[    9.099123] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[    9.296301] usb-storage: device scan complete
[    9.297658] scsi 0:0:0:0: Direct-Access     Easy     Disk             1100 PQ: 0 ANSI: 0 CCS
[    9.317728] input: PC Speaker as /class/input/input8
[    9.902564] Driver 'sd' needs updating - please use bus_type methods
[    9.903730] sd 0:0:0:0: [sda] 953344 512-byte hardware sectors (488 MB)
[    9.904660] sd 0:0:0:0: [sda] Write Protect is off
[    9.904666] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
[    9.904668] sd 0:0:0:0: [sda] Assuming drive cache: write through
[    9.907946] sd 0:0:0:0: [sda] 953344 512-byte hardware sectors (488 MB)
[    9.908815] sd 0:0:0:0: [sda] Write Protect is off
[    9.908819] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
[    9.908822] sd 0:0:0:0: [sda] Assuming drive cache: write through
[    9.909011]  sda: sda1
[    9.910064] sd 0:0:0:0: [sda] Attached SCSI removable disk
[    9.998352] input: PS/2 Mouse as /class/input/input9
[   10.024036] intel8x0_measure_ac97_clock: measured 55365 usecs
[   10.024040] intel8x0: clocking to 48000
[   10.024889] Yenta: CardBus bridge found at 0000:01:0b.0 [1179:0001]
[   10.024910] PCI: Bus 2, cardbus bridge: 0000:01:0b.0
[   10.024912]   IO window: 0x0000c000-0x0000c0ff
[   10.024917]   IO window: 0x0000c400-0x0000c4ff
[   10.024921]   PREFETCH window: 0x28400000-0x287fffff
[   10.024926]   MEM window: 0x2c000000-0x2fffffff
[   10.047703] input: AlpsPS/2 ALPS GlidePoint as /class/input/input10
[   10.058372] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[   10.081472] Error: Driver 'pcspkr' is already registered, aborting...
[   10.153177] Yenta: ISA IRQ mask 0x0c38, PCI irq 18
[   10.153182] Socket status: 30000007
[   10.153186] pcmcia: parent PCI bridge I/O window: 0xc000 - 0xcfff
[   10.153190] cs: IO port probe 0xc000-0xcfff: clean.
[   10.153396] pcmcia: parent PCI bridge Memory window: 0xcfe00000 - 0xcfefffff
[   10.153678] ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 22 (level, low) -> IRQ 22
[   10.153721] ath5k_pci 0000:01:05.0: registered as 'phy0'
[   10.190262] phy0: Selected rate control algorithm 'pid'
[   10.446450] ath5k phy0: Atheros AR5213 chip found (MAC: 0x56, PHY: 0x41)
[   10.446455] ath5k phy0: RF5111 5GHz radio found (0x17)
[   10.446457] ath5k phy0: RF2111 2GHz radio found (0x23)
[   10.837653] cs: IO port probe 0x100-0x3af: clean.
[   10.838532] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[   10.838902] cs: IO port probe 0x820-0x8ff: clean.
[   10.839224] cs: IO port probe 0xc00-0xcf7: clean.
[   10.839655] cs: IO port probe 0xa00-0xaff: clean.
[   11.214843] Adding 979924k swap on /dev/hda6.  Priority:-1 extents:1 across:979924k
[   11.406676] EXT3 FS on hda1, internal journal
[   11.634689] loop: module loaded
[   13.577738] SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled
[   13.579598] SGI XFS Quota Management subsystem
[   13.654893] XFS mounting filesystem hda8
[   13.947506] Ending clean XFS mount for filesystem: hda8
[   14.121320] ReiserFS: hda7: found reiserfs format "3.6" with standard journal
[   14.121336] ReiserFS: hda7: using ordered data mode
[   14.127833] ReiserFS: hda7: journal params: device hda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[   14.128996] ReiserFS: hda7: checking transaction log (hda7)
[   14.166643] ReiserFS: hda7: Using r5 hash to sort names
[   14.202493] XFS mounting filesystem hda2
[   14.528782] Ending clean XFS mount for filesystem: hda2
[   14.684527] XFS mounting filesystem hda5
[   15.132082] Ending clean XFS mount for filesystem: hda5
[   16.784133] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
[   17.550646] NET: Registered protocol family 10
[   17.551217] lo: Disabled Privacy Extensions
[   24.574805] lp0: using parport0 (interrupt-driven).
[   24.627792] ppdev: user-space parallel port driver
[   27.832022] eth0: no IPv6 routers present
[   28.483209] Bluetooth: Core ver 2.11
[   28.485345] NET: Registered protocol family 31
[   28.485352] Bluetooth: HCI device and connection manager initialized
[   28.485356] Bluetooth: HCI socket layer initialized
[   28.656660] Bluetooth: L2CAP ver 2.9
[   28.656666] Bluetooth: L2CAP socket layer initialized
[   28.686973] Bluetooth: RFCOMM socket layer initialized
[   28.686992] Bluetooth: RFCOMM TTY layer initialized
[   28.686995] Bluetooth: RFCOMM ver 1.8
[   29.035807] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   34.493182] [drm] Initialized drm 1.1.0 20060810
[   34.497469] PCI: Setting latency timer of device 0000:00:02.0 to 64
[   34.497559] [drm] Initialized i915 1.6.0 20060119 on minor 0
[   34.497570] pci 0000:00:02.1: enabling device (0000 -> 0002)
[   34.497577] PCI: Setting latency timer of device 0000:00:02.1 to 64
[   34.497636] [drm] Initialized i915 1.6.0 20060119 on minor 1
[   69.915545] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!

** Loaded modules:
Module                  Size  Used by
nls_utf8                1760  1 
nls_cp437               5568  1 
vfat                    9184  1 
fat                    40896  1 vfat
nls_base                6820  4 nls_utf8,nls_cp437,vfat,fat
i915                   25280  2 
drm                    65192  3 i915
binfmt_misc             7528  1 
rfcomm                 28272  2 
l2cap                  17248  9 rfcomm
bluetooth              44868  4 rfcomm,l2cap
ppdev                   6500  0 
lp                      8164  0 
ipv6                  235364  25 
reiserfs              189888  1 
xfs                   457976  3 
sbp2                   18572  0 
loop                   12748  0 
pcmcia                 29548  0 
firmware_class          6816  1 pcmcia
arc4                    1824  2 
ecb                     2624  2 
crypto_blkcipher       15236  1 ecb
joydev                  8480  0 
sd_mod                 22200  2 
parport_pc             22500  1 
parport                30988  3 ppdev,lp,parport_pc
serio_raw               4740  0 
snd_pcsp                8576  0 
ath5k                  87264  0 
psmouse                32336  0 
yenta_socket           20620  1 
rsrc_nonstatic          9504  1 yenta_socket
pcmcia_core            31892  3 pcmcia,yenta_socket,rsrc_nonstatic
mac80211              139712  1 ath5k
snd_intel8x0           26268  4 
snd_intel8x0m          12492  0 
snd_ac97_codec         88484  2 snd_intel8x0,snd_intel8x0m
cfg80211               21576  2 ath5k,mac80211
ac97_bus                1728  1 snd_ac97_codec
snd_pcm                62596  5 snd_pcsp,snd_intel8x0,snd_intel8x0m,snd_ac97_codec
snd_timer              17800  2 snd_pcm
snd                    45604  12 snd_pcsp,snd_intel8x0,snd_intel8x0m,snd_ac97_codec,snd_pcm,snd_timer
soundcore               6368  1 snd
snd_page_alloc          7816  3 snd_intel8x0,snd_intel8x0m,snd_pcm
rng_core                3940  0 
iTCO_wdt                9508  0 
shpchp                 25528  0 
pci_hotplug            23460  1 shpchp
video                  16432  0 
output                  2912  1 video
battery                10180  0 
ac                      4196  0 
button                  6096  0 
intelfb                30372  0 
i2c_algo_bit            5188  1 intelfb
i2c_core               19828  2 intelfb,i2c_algo_bit
intel_agp              22556  1 
agpgart                28776  4 drm,intelfb,intel_agp
evdev                   8000  8 
ext3                  105512  1 
jbd                    39444  1 ext3
mbcache                 7108  1 ext3
ide_disk               10496  7 
usbhid                 35904  0 
hid                    33184  1 usbhid
ff_memless              4392  1 usbhid
usb_storage            77024  1 
piix                    6568  0 [permanent]
ide_pci_generic         3908  0 [permanent]
ide_core               96136  3 ide_disk,piix,ide_pci_generic
e100                   28908  0 
mii                     4896  1 e100
ohci1394               24944  0 
ieee1394               75800  2 sbp2,ohci1394
ata_generic             4676  0 
libata                140416  1 ata_generic
scsi_mod              129324  4 sbp2,sd_mod,usb_storage,libata
dock                    8304  1 libata
ehci_hcd               28396  0 
uhci_hcd               18672  0 
usbcore               118224  5 usbhid,usb_storage,ehci_hcd,uhci_hcd
thermal                15228  0 
processor              32544  2 thermal
fan                     4164  0 
thermal_sys            10856  4 video,thermal,processor,fan

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller [8086:3580] (rev 02)
	Subsystem: Toshiba America Info Systems Device [1179:0001]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 0
	Region 0: Memory at <unassigned> (32-bit, prefetchable)
	Capabilities: <access denied>
	Kernel driver in use: agpgart-intel
	Kernel modules: intel-agp

00:00.1 System peripheral [0880]: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller [8086:3584] (rev 02)
	Subsystem: Toshiba America Info Systems Device [1179:0001]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0

00:00.3 System peripheral [0880]: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller [8086:3585] (rev 02)
	Subsystem: Toshiba America Info Systems Device [1179:0001]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0

00:02.0 VGA compatible controller [0300]: Intel Corporation 82852/855GM Integrated Graphics Device [8086:3582] (rev 02) (prog-if 00 [VGA controller])
	Subsystem: Toshiba America Info Systems Device [1179:0002]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at d8000000 (32-bit, prefetchable) [size=128M]
	Region 1: Memory at d0000000 (32-bit, non-prefetchable) [size=512K]
	Region 2: I/O ports at eff8 [size=8]
	Capabilities: <access denied>
	Kernel modules: intelfb

00:02.1 Display controller [0380]: Intel Corporation 82852/855GM Integrated Graphics Device [8086:3582] (rev 02)
	Subsystem: Toshiba America Info Systems Device [1179:0002]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Region 0: Memory at 20000000 (32-bit, prefetchable) [size=128M]
	Region 1: Memory at 28000000 (32-bit, non-prefetchable) [size=512K]
	Capabilities: <access denied>

00:1d.0 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 [8086:24c2] (rev 03) (prog-if 00 [UHCI])
	Subsystem: Toshiba America Info Systems Device [1179:0001]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 16
	Region 4: I/O ports at 1000 [size=32]
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci-hcd

00:1d.1 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 [8086:24c4] (rev 03) (prog-if 00 [UHCI])
	Subsystem: Toshiba America Info Systems Device [1179:0001]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 19
	Region 4: I/O ports at 1020 [size=32]
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci-hcd

00:1d.7 USB Controller [0c03]: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller [8086:24cd] (rev 03) (prog-if 20 [EHCI])
	Subsystem: Toshiba America Info Systems Device [1179:0001]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin D routed to IRQ 23
	Region 0: Memory at cffffc00 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd
	Kernel modules: ehci-hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 83) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR+ INTx-
	Latency: 0
	Bus: primary=00, secondary=01, subordinate=03, sec-latency=64
	I/O behind bridge: 0000c000-0000cfff
	Memory behind bridge: cfe00000-cfefffff
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Kernel modules: shpchp

00:1f.0 ISA bridge [0601]: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge [8086:24cc] (rev 03)
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Kernel modules: intel-rng, iTCO_wdt

00:1f.1 IDE interface [0101]: Intel Corporation 82801DBM (ICH4-M) IDE Controller [8086:24ca] (rev 03) (prog-if 8a [Master SecP PriP])
	Subsystem: Toshiba America Info Systems Device [1179:0001]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 18
	Region 0: I/O ports at 01f0 [size=8]
	Region 1: I/O ports at 03f4 [size=1]
	Region 2: I/O ports at 0170 [size=8]
	Region 3: I/O ports at 0374 [size=1]
	Region 4: I/O ports at bfa0 [size=16]
	Region 5: Memory at 28080000 (32-bit, non-prefetchable) [size=1K]
	Kernel driver in use: PIIX_IDE
	Kernel modules: piix

00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller [8086:24c5] (rev 03)
	Subsystem: Toshiba America Info Systems Device [1179:0241]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 17
	Region 0: I/O ports at be00 [size=256]
	Region 1: I/O ports at bdc0 [size=64]
	Region 2: Memory at cfdffe00 (32-bit, non-prefetchable) [size=512]
	Region 3: Memory at cfdffd00 (32-bit, non-prefetchable) [size=256]
	Capabilities: <access denied>
	Kernel driver in use: Intel ICH
	Kernel modules: snd-intel8x0

00:1f.6 Modem [0703]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller [8086:24c6] (rev 03) (prog-if 00 [Generic])
	Subsystem: Toshiba America Info Systems Device [1179:0001]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 17
	Region 0: I/O ports at ba00 [size=256]
	Region 1: I/O ports at b980 [size=128]
	Capabilities: <access denied>
	Kernel driver in use: Intel ICH Modem
	Kernel modules: snd-intel8x0m

01:05.0 Ethernet controller [0200]: Atheros Communications Inc. AR5212/AR5213 Multiprotocol MAC/baseband processor [168c:0013] (rev 01)
	Subsystem: Askey Computer Corp. Device [144f:7058]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 168 (2500ns min, 7000ns max), Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 22
	Region 0: Memory at cfef0000 (32-bit, non-prefetchable) [size=64K]
	Capabilities: <access denied>
	Kernel driver in use: ath5k_pci
	Kernel modules: ath5k

01:07.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) [104c:8023] (prog-if 10 [OHCI])
	Subsystem: Toshiba America Info Systems Device [1179:0001]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64 (500ns min, 1000ns max), Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 21
	Region 0: Memory at cfeef800 (32-bit, non-prefetchable) [size=2K]
	Region 1: Memory at cfee8000 (32-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: ohci1394
	Kernel modules: ohci1394

01:08.0 Ethernet controller [0200]: Intel Corporation 82801DB PRO/100 VE (MOB) Ethernet Controller [8086:103d] (rev 83)
	Subsystem: Toshiba America Info Systems Device [1179:0001]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64 (2000ns min, 14000ns max), Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 20
	Region 0: Memory at cfee7000 (32-bit, non-prefetchable) [size=4K]
	Region 1: I/O ports at cf40 [size=64]
	Capabilities: <access denied>
	Kernel driver in use: e100
	Kernel modules: e100, eepro100

01:0b.0 CardBus bridge [0607]: Toshiba America Info Systems ToPIC100 PCI to Cardbus Bridge with ZV Support [1179:0617] (rev 33)
	Subsystem: Toshiba America Info Systems Device [1179:0001]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 168
	Interrupt: pin A routed to IRQ 18
	Region 0: Memory at cfe00000 (32-bit, non-prefetchable) [size=4K]
	Bus: primary=01, secondary=02, subordinate=02, sec-latency=0
	Memory window 0: 28400000-287ff000 (prefetchable)
	Memory window 1: 2c000000-2ffff000
	I/O window 0: 0000c000-0000c0ff
	I/O window 1: 0000c400-0000c4ff
	BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
	16-bit legacy interface ports at 0001
	Kernel driver in use: yenta_cardbus
	Kernel modules: yenta_socket

01:0d.0 System peripheral [0880]: Toshiba America Info Systems SD TypA Controller [1179:0805] (rev 05)
	Subsystem: Toshiba America Info Systems Device [1179:0001]
	Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at cfee6e00 (32-bit, non-prefetchable) [size=512]
	Capabilities: <access denied>



-- System Information:
Debian Release: 5.0.1
  APT prefers stable
  APT policy: (500, 'stable')
Architecture: i386 (i686)

Kernel: Linux 2.6.26-2-686 (SMP w/1 CPU core)
Locale: LANG=ru_UA.UTF-8, LC_CTYPE=ru_UA.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages linux-image-2.6.26-2-686 depends on:
ii  debconf [debconf-2.0]         1.5.24     Debian configuration management sy
ii  initramfs-tools [linux-initra 0.92o      tools for generating an initramfs
ii  module-init-tools             3.4-1      tools for managing Linux kernel mo

Versions of packages linux-image-2.6.26-2-686 recommends:
ii  libc6-i686                    2.7-18     GNU C Library: Shared libraries [i

Versions of packages linux-image-2.6.26-2-686 suggests:
ii  grub                       0.97-47lenny2 GRand Unified Bootloader (Legacy v
pn  linux-doc-2.6.26           <none>        (no description available)

-- debconf information:
  linux-image-2.6.26-2-686/postinst/bootloader-error-2.6.26-2-686:
  shared/kernel-image/really-run-bootloader: true
  linux-image-2.6.26-2-686/postinst/old-dir-initrd-link-2.6.26-2-686: true
  linux-image-2.6.26-2-686/preinst/overwriting-modules-2.6.26-2-686: true
  linux-image-2.6.26-2-686/postinst/bootloader-test-error-2.6.26-2-686:
  linux-image-2.6.26-2-686/postinst/depmod-error-2.6.26-2-686: false
  linux-image-2.6.26-2-686/preinst/bootloader-initrd-2.6.26-2-686: true
  linux-image-2.6.26-2-686/preinst/abort-overwrite-2.6.26-2-686:
  linux-image-2.6.26-2-686/preinst/abort-install-2.6.26-2-686:
  linux-image-2.6.26-2-686/postinst/depmod-error-initrd-2.6.26-2-686: false
  linux-image-2.6.26-2-686/postinst/create-kimage-link-2.6.26-2-686: true
  linux-image-2.6.26-2-686/preinst/failed-to-move-modules-2.6.26-2-686:
  linux-image-2.6.26-2-686/preinst/initrd-2.6.26-2-686:
  linux-image-2.6.26-2-686/preinst/lilo-has-ramdisk:
  linux-image-2.6.26-2-686/prerm/would-invalidate-boot-loader-2.6.26-2-686: true
  linux-image-2.6.26-2-686/postinst/kimage-is-a-directory:
  linux-image-2.6.26-2-686/postinst/old-initrd-link-2.6.26-2-686: true
  linux-image-2.6.26-2-686/preinst/elilo-initrd-2.6.26-2-686: true
  linux-image-2.6.26-2-686/preinst/lilo-initrd-2.6.26-2-686: true
  linux-image-2.6.26-2-686/prerm/removing-running-kernel-2.6.26-2-686: true
  linux-image-2.6.26-2-686/postinst/old-system-map-link-2.6.26-2-686: true



Reply to: