Hello
I migrate my old server under etch on a new one under lenny
The new server are a Fujitsu-Siemens primecenter with a SAN
I have two fiber channel cards :
04:00.0 Fibre Channel: Emulex Corporation Zephyr-X LightPulse Fibre
Channel Host Adapter (rev 02)
04:00.1 Fibre Channel: Emulex Corporation Zephyr-X LightPulse Fibre
Channel Host Adapter (rev 02)
All work fine, I installed the multipath-tools
But when I reboot the system, fsck hang with theses errors :
Log of fsck -C -R -A -a
Thu Apr 9 01:54:41 2009
fsck 1.41.3 (12-Oct-2008)
fsck.ext3: No such file or directory while trying to open
/dev/mapper/3600c0ff000d793a677bfc84901000000-part1
/dev/mapper/3600c0ff000d793a677bfc84901000000-part1:
The superblock could not be read or does not describe a correct ext2
filesystem. If the device is valid and it really contains an ext2
filesystem (and not swap or ufs or something else), then the superblock
is corrupt, and you might try running e2fsck with an alternate
superblock:
e2fsck -b 8193 <device>
fsck died with exit status 8
After the CTRL+D the system continue booting and all are ok.
My fstab line :
/dev/mapper/3600c0ff000d793a677bfc84901000000-part1
/home ext3 defaults,errors=remount-ro 0 1
and :
sMaster01:~# dmesg|grep -i multipath
[ 74.985002] device-mapper: multipath: version 1.0.5 loaded
[ 75.021788] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 75.021788] device-mapper: table: 254:0: multipath: error getting
device
[ 77.357822] device-mapper: table: 254:12: multipath: error getting
device
sMaster01:~#
any ideas are welcome to solve this problem.
Regards
Guy