Bug#507728: linux-image-2.6.26-2-686: nearly identical problems with usb stick connected via usb-pci-card
Package: linux-image-2.6.26-2-686
Version: 2.6.26-15
Followup-For: Bug #507728
The problem also happens, when an usb-stick is connected via
usb2.0-pci-card. I tested the same hardware, on the same computer with
Windows XP -> no problem
Etch with kernel 2.6.18 -> no problem
Etch with kernel 2.6.24 -> no problem
Lenny with kernel 2.6.24 -> no problem
Lenny with kernel 2.6.26 -> problem
Details:
When i plug the stick in, tail -f /var/log/messages shows this:
http://nopaste.debianforum.de/19374
Reading data from the stick is NO problem. But if i write to it, then it
fails after some hundred megabytes with these messages:
http://nopaste.debianforum.de/19375
lshal --monitor provides this info:
Stick plugged in:
Start monitoring devicelist:
-------------------------------------------------
22:20:19.820: usb_device_90c_1000_AA04012700012170 added
22:20:19.978: usb_device_90c_1000_AA04012700012170_if0 added
22:20:20.028: usb_device_90c_1000_AA04012700012170_usbraw added
22:20:25.136: usb_device_90c_1000_AA04012700012170_if0_scsi_host added
22:20:25.140:
usb_device_90c_1000_AA04012700012170_if0_scsi_host_scsi_device_lun0 added
22:20:25.287: storage_serial_USB_2_0_Flash_Disk_AA04012700012170_0_0 added
22:20:25.294: storage_serial_USB_2_0_Flash_Disk_AA04012700012170_0_0
property info.interfaces = {'org.freedesktop.Hal.Device.Storage.Removable'}
(new)
22:20:25.331: volume_uuid_49D3_5CDA added
22:20:33.563: volume_uuid_49D3_5CDA property volume.mount_point =
'/media/disk'
22:20:33.566: volume_uuid_49D3_5CDA property volume.is_mounted = true
Then i tried to write to it:
22:34:26.211: volume_uuid_49D3_5CDA property volume.mount_point = ''
22:34:26.213: volume_uuid_49D3_5CDA property volume.is_mounted = false
22:34:26.222: volume_uuid_49D3_5CDA removed
22:34:26.228: storage_serial_USB_2_0_Flash_Disk_AA04012700012170_0_0 removed
22:34:26.241:
usb_device_90c_1000_AA04012700012170_if0_scsi_host_scsi_device_lun0 removed
22:34:26.243: usb_device_90c_1000_AA04012700012170_if0_scsi_host removed
22:34:26.269: usb_device_90c_1000_AA04012700012170_if0 removed
22:34:26.291: usb_device_90c_1000_AA04012700012170_usbraw removed
22:34:26.415: usb_device_90c_1000_AA04012700012170 removed
The data gets lost.
-- Package-specific info:
** Version:
Linux version 2.6.26-2-686 (Debian 2.6.26-15) (dannf@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Thu Mar 26 01:08:11 UTC 2009
** Command line:
root=/dev/mapper/hda9_crypt ro
** Tainted: P (1)
** Kernel log:
[ 5.444902] uhci_hcd 0000:00:11.3: irq 10, io base 0x0000e000
[ 5.445092] usb usb5: configuration #1 chosen from 1 choice
[ 5.445188] hub 5-0:1.0: USB hub found
[ 5.445254] hub 5-0:1.0: 2 ports detected
[ 5.548185] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.548249] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.548316] usb usb5: Product: UHCI Host Controller
[ 5.548371] usb usb5: Manufacturer: Linux 2.6.26-2-686 uhci_hcd
[ 5.548427] usb usb5: SerialNumber: 0000:00:11.3
[ 5.551279] 8139too Fast Ethernet driver 0.9.28
[ 5.551438] ACPI: PCI Interrupt 0000:00:11.4[D] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
[ 5.551598] uhci_hcd 0000:00:11.4: UHCI Host Controller
[ 5.551713] uhci_hcd 0000:00:11.4: new USB bus registered, assigned bus number 6
[ 5.551809] uhci_hcd 0000:00:11.4: irq 10, io base 0x0000e400
[ 5.551998] usb usb6: configuration #1 chosen from 1 choice
[ 5.552140] hub 6-0:1.0: USB hub found
[ 5.552203] hub 6-0:1.0: 2 ports detected
[ 5.656215] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.656282] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.656350] usb usb6: Product: UHCI Host Controller
[ 5.656405] usb usb6: Manufacturer: Linux 2.6.26-2-686 uhci_hcd
[ 5.656461] usb usb6: SerialNumber: 0000:00:11.4
[ 5.657602] ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
[ 5.658420] eth0: RealTek RTL8139 at 0xd400, 00:c1:26:0a:fa:ec, IRQ 10
[ 5.658480] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[ 5.661997] No dock devices found.
[ 5.672797] SCSI subsystem initialized
[ 5.684579] usb 4-1: new full speed USB device using uhci_hcd and address 2
[ 5.684942] libata version 3.00 loaded.
[ 5.738165] hda: max request size: 512KiB
[ 5.784939] hda: 976773168 sectors (500107 MB) w/16384KiB Cache, CHS=60801/255/63
[ 5.809317] hda: cache flushes supported
[ 5.809461] hda: hda1 hda2 < hda5 hda6<6>usb 4-1: configuration #1 chosen from 1 choice
[ 5.876154] hda7<6>usb 4-1: New USB device found, idVendor=046d, idProduct=08da
[ 5.877894] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 5.882913] hda8 hda9 >
[ 5.893171] hdc: ATAPI 40X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache
[ 5.893466] Uniform CD-ROM driver Revision: 3.20
[ 5.906674] hdd: ATAPI 48X CD-ROM CD-R/RW drive, 2048kB Cache
[ 6.377271] device-mapper: uevent: version 1.0.3
[ 6.377431] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
[ 12.263401] kjournald starting. Commit interval 5 seconds
[ 12.263401] EXT3-fs: mounted filesystem with ordered data mode.
[ 13.929478] udevd version 125 started
[ 15.511988] Linux agpgart interface v0.103
[ 15.532363] agpgart: Detected VIA KT266/KY266x/KT333 chipset
[ 15.540745] agpgart: AGP aperture is 128M @ 0xd0000000
[ 15.612454] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 15.627860] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 16.305997] NET: Registered protocol family 23
[ 16.310616] input: Power Button (FF) as /class/input/input1
[ 16.341170] ACPI: Power Button (FF) [PWRF]
[ 16.341340] input: Power Button (CM) as /class/input/input2
[ 16.376147] ACPI: Power Button (CM) [PWRB]
[ 16.376317] input: Sleep Button (CM) as /class/input/input3
[ 16.411976] ACPI: Sleep Button (CM) [SLPB]
[ 17.682369] ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
[ 17.798532] input: PC Speaker as /class/input/input4
[ 17.981351] Linux video capture interface: v2.00
[ 18.028134] gspca: USB GSPCA camera found.(ZC3XX)
[ 18.028200] gspca: [spca5xx_probe:4275] Camera type JPEG
[ 18.308323] gameport: NS558 PnP Gameport is pnp00:0c/gameport0, io 0x201, speed 864kHz
[ 18.681421] gspca: [zc3xx_config:669] Find Sensor HV7131R(c)
[ 18.685427] gspca: [spca5xx_getcapability:1249] maxw 640 maxh 480 minw 160 minh 120
[ 18.685632] usbcore: registered new interface driver snd-usb-audio
[ 18.693902] usbcore: registered new interface driver gspca
[ 18.693971] gspca: gspca driver 01.00.20 registered
[ 18.862797] input: ImPS/2 Logitech Wheel Mouse as /class/input/input5
[ 18.894836] parport_pc 00:09: reported by Plug and Play ACPI
[ 18.894954] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 20.316457] EXT3 FS on dm-0, internal journal
[ 20.597833] loop: module loaded
[ 22.948613] fuse init (API version 7.9)
[ 23.140639] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 23.199845] kjournald starting. Commit interval 5 seconds
[ 23.200368] EXT3 FS on dm-1, internal journal
[ 23.200465] EXT3-fs: mounted filesystem with ordered data mode.
[ 23.235413] kjournald starting. Commit interval 5 seconds
[ 23.235477] EXT3 FS on dm-2, internal journal
[ 23.235477] EXT3-fs: mounted filesystem with ordered data mode.
[ 24.766807] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 26.825833] NET: Registered protocol family 10
[ 26.826537] lo: Disabled Privacy Extensions
[ 30.491249] lp0: using parport0 (interrupt-driven).
[ 30.512804] ppdev: user-space parallel port driver
[ 35.337920] gspca: [spca5xx_set_light_freq:1932] Sensor currently not support light frequency banding filters.
[ 35.338101] gspca: [gspca_set_isoc_ep:945] ISO EndPoint found 0x81 AlternateSet 7
[ 37.488050] eth0: no IPv6 routers present
[ 37.769195] cdrom: This disc doesn't have any tracks I recognize!
[ 40.929156] nvidia: module license 'NVIDIA' taints kernel.
[ 41.186362] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 41.186990] NVRM: loading NVIDIA Linux x86 Kernel Module 96.43.07 Wed Jul 2 12:17:43 PDT 2008
[ 41.247046] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[ 41.247078] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
[ 41.247136] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
[ 50.756774] tun: Universal TUN/TAP device driver, 1.6
[ 50.756774] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 50.762858] tun0: Disabled Privacy Extensions
[ 53.016030] eth0: no IPv6 routers present
[ 68.270564] nepomukservices[3476]: segfault at 4 ip b7d88652 sp bff94610 error 4 in libQtCore.so.4.4.3[b7d35000+224000]
** Loaded modules:
Module Size Used by
tun 8292 1
nvidia 4701136 32
ppdev 6500 0
lp 8164 0
ipv6 235364 14
cpufreq_ondemand 6476 0
cpufreq_stats 3776 0
freq_table 4224 2 cpufreq_ondemand,cpufreq_stats
cpufreq_conservative 5960 0
cpufreq_powersave 1856 0
cpufreq_userspace 3172 0
nls_utf8 1760 1
nls_cp437 5568 1
vfat 9184 1
fat 40896 1 vfat
nls_base 6820 4 nls_utf8,nls_cp437,vfat,fat
ext2 54504 1
fuse 42908 1
loop 12748 0
ns558 3712 0
parport_pc 22500 1
parport 30988 3 ppdev,lp,parport_pc
psmouse 32336 0
serio_raw 4740 0
gspca 639568 0
videodev 27520 1 gspca
v4l1_compat 12260 1 videodev
snd_usb_audio 70304 1
snd_usb_lib 13440 1 snd_usb_audio
pcspkr 2432 0
snd_cmipci 29024 1
gameport 10700 3 ns558,snd_cmipci
snd_pcm_oss 32832 0
snd_mixer_oss 12320 1 snd_pcm_oss
snd_pcm 62596 3 snd_usb_audio,snd_cmipci,snd_pcm_oss
snd_page_alloc 7816 1 snd_pcm
snd_opl3_lib 9344 1 snd_cmipci
snd_hwdep 6212 2 snd_usb_audio,snd_opl3_lib
snd_mpu401_uart 6368 1 snd_cmipci
snd_seq_dummy 2660 0
i2c_viapro 6836 0
i2c_core 19828 2 nvidia,i2c_viapro
snd_seq_oss 24992 0
snd_seq_midi 5728 0
snd_rawmidi 18528 3 snd_usb_lib,snd_mpu401_uart,snd_seq_midi
via_ircc 15764 0
snd_seq_midi_event 6432 2 snd_seq_oss,snd_seq_midi
snd_seq 41456 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
button 6096 0
irda 95512 1 via_ircc
crc_ccitt 2080 1 irda
snd_timer 17800 3 snd_pcm,snd_opl3_lib,snd_seq
snd_seq_device 6380 6 snd_opl3_lib,snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
snd 45604 17 snd_usb_audio,snd_cmipci,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_opl3_lib,snd_hwdep,snd_mpu401_uart,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore 6368 1 snd
shpchp 25528 0
pci_hotplug 23460 1 shpchp
via_agp 7744 1
agpgart 28776 2 nvidia,via_agp
evdev 8000 4
ext3 105512 3
jbd 39444 1 ext3
mbcache 7108 2 ext2,ext3
sha256_generic 11360 0
aes_i586 7744 6
aes_generic 29256 1 aes_i586
cbc 3264 3
dm_crypt 11172 1
dm_mod 46184 7 dm_crypt
crypto_blkcipher 15236 5 cbc,dm_crypt
ide_cd_mod 27652 0
cdrom 30176 1 ide_cd_mod
ide_disk 10496 6
ata_generic 4676 0
libata 140416 1 ata_generic
scsi_mod 129324 1 libata
dock 8304 1 libata
ide_pci_generic 3908 0 [permanent]
8139too 20320 0
floppy 47748 0
uhci_hcd 18672 0
via82cxxx 6948 0 [permanent]
ide_core 96136 4 ide_cd_mod,ide_disk,ide_pci_generic,via82cxxx
8139cp 16800 0
mii 4896 2 8139too,8139cp
ehci_hcd 28396 0
ohci_hcd 18500 0
usbcore 118224 7 gspca,snd_usb_audio,snd_usb_lib,uhci_hcd,ehci_hcd,ohci_hcd
thermal 15228 0
processor 32544 2 thermal
fan 4164 0
thermal_sys 10856 3 thermal,processor,fan
** PCI devices:
00:00.0 Host bridge [0600]: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333] [1106:3099]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M]
Capabilities: <access denied>
Kernel driver in use: agpgart-via
Kernel modules: via-agp
00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333 AGP] [1106:b099] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: e0000000-e1ffffff
Prefetchable memory behind bridge: d8000000-dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel modules: shpchp
00:09.0 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43) (prog-if 10 [OHCI])
Subsystem: NEC Corporation Hama USB 2.0 CardBus [1033:0035]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (250ns min, 10500ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e2000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:09.1 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43) (prog-if 10 [OHCI])
Subsystem: NEC Corporation Hama USB 2.0 CardBus [1033:0035]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (250ns min, 10500ns max), Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 5
Region 0: Memory at e2001000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:09.2 USB Controller [0c03]: NEC Corporation USB 2.0 [1033:00e0] (rev 04) (prog-if 20 [EHCI])
Subsystem: Device [1838:1074]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (4000ns min, 8500ns max), Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 10
Region 0: Memory at e2002000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:0b.0 Multimedia audio controller [0401]: C-Media Electronics Inc CM8738 [13f6:0111] (rev 10)
Subsystem: C-Media Electronics Inc CMI8738/C3DX PCI Audio Device [13f6:0111]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (500ns min, 6000ns max)
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at d000 [size=256]
Capabilities: <access denied>
Kernel driver in use: C-Media PCI
Kernel modules: snd-cmipci
00:0d.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
Subsystem: Compex FN22-3(A) LinxPRO Ethernet Adapter [11f6:8139]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at d400 [size=256]
Region 1: Memory at e2003000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: 8139too
Kernel modules: 8139cp, 8139too
00:11.0 ISA bridge [0601]: VIA Technologies, Inc. VT8233 PCI to ISA Bridge [1106:3074]
Subsystem: VIA Technologies, Inc. VT8233 PCI to ISA Bridge [1106:3074]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel modules: i2c-viapro, via-ircc
00:11.1 IDE interface [0101]: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] (rev 06) (prog-if 8a [Master SecP PriP])
Subsystem: VIA Technologies, Inc. VT82C586/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE [1106:0571]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin A routed to IRQ 11
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
Region 4: I/O ports at d800 [size=16]
Capabilities: <access denied>
Kernel driver in use: VIA_IDE
Kernel modules: via82cxxx
00:11.2 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 1b) (prog-if 00 [UHCI])
Subsystem: First International Computer, Inc. VA-502 Mainboard [0925:1234]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin D routed to IRQ 10
Region 4: I/O ports at dc00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:11.3 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 1b) (prog-if 00 [UHCI])
Subsystem: First International Computer, Inc. VA-502 Mainboard [0925:1234]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin D routed to IRQ 10
Region 4: I/O ports at e000 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:11.4 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 1b) (prog-if 00 [UHCI])
Subsystem: First International Computer, Inc. VA-502 Mainboard [0925:1234]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin D routed to IRQ 10
Region 4: I/O ports at e400 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
01:00.0 VGA compatible controller [0300]: nVidia Corporation NV25 [GeForce4 Ti 4200] [10de:0253] (rev a3) (prog-if 00 [VGA controller])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 248 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e0000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d8000000 (32-bit, prefetchable) [size=64M]
Region 2: Memory at dc000000 (32-bit, prefetchable) [size=512K]
[virtual] Expansion ROM at dc080000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: nvidia
Kernel modules: nvidia, nvidiafb
-- System Information:
Debian Release: 5.0
APT prefers proposed-updates
APT policy: (500, 'proposed-updates'), (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 2.6.26-2-686 (SMP w/1 CPU core)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.26-2-686 depends on:
ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92o tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.26-2-686 recommends:
ii libc6-i686 2.7-18 GNU C Library: Shared libraries [i
Versions of packages linux-image-2.6.26-2-686 suggests:
ii grub 0.97-47lenny2 GRand Unified Bootloader (Legacy v
pn linux-doc-2.6.26 <none> (no description available)
-- debconf information:
linux-image-2.6.26-2-686/postinst/bootloader-error-2.6.26-2-686:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.26-2-686/postinst/old-dir-initrd-link-2.6.26-2-686: true
linux-image-2.6.26-2-686/preinst/overwriting-modules-2.6.26-2-686: true
linux-image-2.6.26-2-686/postinst/bootloader-test-error-2.6.26-2-686:
linux-image-2.6.26-2-686/postinst/depmod-error-2.6.26-2-686: false
linux-image-2.6.26-2-686/preinst/bootloader-initrd-2.6.26-2-686: true
linux-image-2.6.26-2-686/preinst/abort-overwrite-2.6.26-2-686:
linux-image-2.6.26-2-686/preinst/abort-install-2.6.26-2-686:
linux-image-2.6.26-2-686/postinst/depmod-error-initrd-2.6.26-2-686: false
linux-image-2.6.26-2-686/postinst/create-kimage-link-2.6.26-2-686: true
linux-image-2.6.26-2-686/preinst/failed-to-move-modules-2.6.26-2-686:
linux-image-2.6.26-2-686/preinst/initrd-2.6.26-2-686:
linux-image-2.6.26-2-686/preinst/lilo-has-ramdisk:
linux-image-2.6.26-2-686/prerm/would-invalidate-boot-loader-2.6.26-2-686: true
linux-image-2.6.26-2-686/postinst/kimage-is-a-directory:
linux-image-2.6.26-2-686/postinst/old-initrd-link-2.6.26-2-686: true
linux-image-2.6.26-2-686/preinst/elilo-initrd-2.6.26-2-686: true
linux-image-2.6.26-2-686/preinst/lilo-initrd-2.6.26-2-686: true
linux-image-2.6.26-2-686/prerm/removing-running-kernel-2.6.26-2-686: true
linux-image-2.6.26-2-686/postinst/old-system-map-link-2.6.26-2-686: true
Reply to: