Bug#561843: ethtool/mii-tool report incorrect/missing values on Marvell 88E1011
On Sun, Dec 20, 2009 at 05:27:33PM +0100, Kurt Roeckx wrote:
> On the other hand, mii-tool reports this:
> # mii-tool -v
> eth0: negotiated 100baseTx-FD flow-control, link ok
> product info: Yukon 88E1011 rev 5
> basic mode: autonegotiation enabled
> basic status: autonegotiation complete, link ok
> capabilities: 1000baseT-HD 1000baseT-FD 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD
> advertising: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD flow-control
> link partner: 1000baseT-HD 1000baseT-FD 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD flow-control
>
> The link partner is only a 100 mbit switch, so it shouldn't
> advertise 1000. It looks like the 2 last lines are switched.
This part is part is probably #511395
Kurt
Reply to: