Bug#561552: linux-image-2.6.32-trunk-amd64: [agp/drm] agp + dri unavailable with testing X.org 1.6.5
Package: linux-2.6
Version: 2.6.32-2
Severity: normal
At least tvtime works in indirect mode only, high CPU.
Does not look like missing Firmware, no FW err messages in dmesg or syslog:
--- /var/log/Xorg.0.log 2009-12-18 05:10:10.000000000 +0100
+++ /var/log/Xorg.0.log.old 2009-12-18 05:06:14.000000000 +0100
@@ -3,7 +3,7 @@
Release Date: 2009-10-11
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.30-2-amd64 x86_64 Debian
-Current Operating System: Linux tom1 2.6.31-1-amd64 #1 SMP Mon Nov 16 04:44:38 UTC 2009 x86_64
+Current Operating System: Linux tom1 2.6.32-trunk-amd64 #1 SMP Thu Dec 17 06:29:18 UTC 2009 x86_64
Build Date: 13 October 2009 09:39:10AM
xorg-server 2:1.6.5-1 (jcristau@debian.org)
Before reporting problems, check http://wiki.x.org
@@ -11,7 +11,7 @@
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
-(==) Log file: "/var/log/Xorg.0.log", Time: Fri Dec 18 05:08:46 2009
+(==) Log file: "/var/log/Xorg.0.log", Time: Fri Dec 18 04:11:44 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
@@ -1018,35 +1018,18 @@
(II) RADEON(0): [drm] added 1 reserved context for kernel
(II) RADEON(0): X context handle = 0x1
(II) RADEON(0): [drm] installed DRM signal handler
-(**) RADEON(0): Using AGP 4x
-(II) RADEON(0): [agp] Mode 0x1f000a09 [AGP 0x1106/0x0282; Card 0x1002/0x4152 0x17af/0x2016]
-(II) RADEON(0): [agp] 65536 kB allocated with handle 0x00000001
-(II) RADEON(0): [agp] ring handle = 0xd0000000
-(II) RADEON(0): [agp] Ring mapped at 0x7f7f9fcc1000
-(II) RADEON(0): [agp] ring read ptr handle = 0xd0101000
-(II) RADEON(0): [agp] Ring read ptr mapped at 0x7f7f9fde7000
-(II) RADEON(0): [agp] vertex/indirect buffers handle = 0xd0102000
-(II) RADEON(0): [agp] Vertex/indirect buffers mapped at 0x7f7f9318a000
-(II) RADEON(0): [agp] GART texture map handle = 0xd0302000
-(II) RADEON(0): [agp] GART Texture map mapped at 0x7f7f8f58a000
-(II) RADEON(0): [drm] register handle = 0x2fff8000
-(II) RADEON(0): [dri] Visual configs initialized
+(WW) RADEON(0): [agp] AGP not available
+(EE) RADEON(0): [agp] AGP failed to initialize. Disabling the DRI.
+(II) RADEON(0): [agp] You may want to make sure the agpgart kernel module
+is loaded before the radeon kernel module.
+(II) RADEON(0): [drm] removed 1 reserved context for kernel
+(II) RADEON(0): [drm] unmapping 8192 bytes of SAREA 0x1b7ff000 at 0x7f757345f000
+(II) RADEON(0): [drm] Closed DRM master.
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0xf7fff000 0x1fff0000
(II) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
(==) RADEON(0): Backing store disabled
-(II) RADEON(0): [DRI] installation complete
-(II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers
-(II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers
-(II) RADEON(0): [drm] dma control initialized, using IRQ 16
-(II) RADEON(0): [drm] Initialized kernel GART heap manager, 62914560
-(WW) RADEON(0): DRI init changed memory map, adjusting ...
-(WW) RADEON(0): MC_FB_LOCATION was: 0xf7fff000 is: 0xf7fff000
-(WW) RADEON(0): MC_AGP_LOCATION was: 0xffffffc0 is: 0xd3ffd000
-(II) RADEON(0): RADEONRestoreMemMapRegisters() :
-(II) RADEON(0): MC_FB_LOCATION : 0xf7fff000 0xf7fff000
-(II) RADEON(0): MC_AGP_LOCATION : 0xd3ffd000
-(II) RADEON(0): Direct rendering enabled
+(WW) RADEON(0): Direct rendering disabled
(II) RADEON(0): XAA Render acceleration unsupported on Radeon 9500/9700 and newer. Please use EXA instead.
(II) RADEON(0): Render acceleration disabled
(II) RADEON(0): num quad-pipes is 1
@@ -1094,7 +1077,7 @@
restore memmap
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0xf7fff000 0xf7fff000
-(II) RADEON(0): MC_AGP_LOCATION : 0xd3ffd000
+(II) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
restore common
restore crtc1
restore pll1
@@ -1123,19 +1106,9 @@
(II) Initializing built-in extension DAMAGE
SELinux: Disabled on system, not enabling in X server
(II) AIGLX: Screen 0 is not DRI2 capable
-drmOpenDevice: node name is /dev/dri/card0
-drmOpenDevice: open result is 10, (OK)
-drmOpenByBusid: Searching for BusID pci:0000:01:00.0
-drmOpenDevice: node name is /dev/dri/card0
-drmOpenDevice: open result is 10, (OK)
-drmOpenByBusid: drmOpenMinor returns 10
-drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
-(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
-(II) AIGLX: enabled GLX_SGI_make_current_read
-(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
-(II) AIGLX: enabled GLX_texture_from_pixmap with driver support
-(II) AIGLX: Loaded and initialized /usr/lib/dri/r300_dri.so
-(II) GLX: Initialized DRI GL provider for screen 0
+(II) AIGLX: Screen 0 is not DRI capable
+(II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so
+(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) RADEON(0): Setting screen physical size to 370 x 280
[dix] Could not init font path element unix/:7100, removing from list!
(II) config/hal: Adding input device MLK Typhoon Deskset
@@ -1155,23 +1128,23 @@
(**) Option "xkb_layout" "de"
(**) Option "xkb_variant" "nodeadkeys"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
-(II) config/hal: Adding input device USB Audio
-(**) USB Audio: always reports core events
-(**) USB Audio: Device: "/dev/input/event3"
-(II) USB Audio: Found keys
-(II) USB Audio: Configuring as keyboard
-(II) XINPUT: Adding extended input device "USB Audio" (type: KEYBOARD)
+(II) config/hal: Adding input device IR-receiver inside an USB DVB receiver
+(**) IR-receiver inside an USB DVB receiver: always reports core events
+(**) IR-receiver inside an USB DVB receiver: Device: "/dev/input/event4"
+(II) IR-receiver inside an USB DVB receiver: Found keys
+(II) IR-receiver inside an USB DVB receiver: Configuring as keyboard
+(II) XINPUT: Adding extended input device "IR-receiver inside an USB DVB receiver" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "de"
(**) Option "xkb_variant" "nodeadkeys"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
-(II) config/hal: Adding input device USB2.0 PC CAMERA
-(**) USB2.0 PC CAMERA: always reports core events
-(**) USB2.0 PC CAMERA: Device: "/dev/input/event2"
-(II) USB2.0 PC CAMERA: Found keys
-(II) USB2.0 PC CAMERA: Configuring as keyboard
-(II) XINPUT: Adding extended input device "USB2.0 PC CAMERA" (type: KEYBOARD)
+(II) config/hal: Adding input device USB Audio
+(**) USB Audio: always reports core events
+(**) USB Audio: Device: "/dev/input/event7"
+(II) USB Audio: Found keys
+(II) USB Audio: Configuring as keyboard
+(II) XINPUT: Adding extended input device "USB Audio" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "de"
@@ -1199,12 +1172,12 @@
(**) MLK Typhoon Deskset: (accel) filter stage 0: 20.00 ms
(**) MLK Typhoon Deskset: (accel) set acceleration profile 0
(II) MLK Typhoon Deskset: initialized for relative axes.
-(II) config/hal: Adding input device IR-receiver inside an USB DVB receiver
-(**) IR-receiver inside an USB DVB receiver: always reports core events
-(**) IR-receiver inside an USB DVB receiver: Device: "/dev/input/event1"
-(II) IR-receiver inside an USB DVB receiver: Found keys
-(II) IR-receiver inside an USB DVB receiver: Configuring as keyboard
-(II) XINPUT: Adding extended input device "IR-receiver inside an USB DVB receiver" (type: KEYBOARD)
+(II) config/hal: Adding input device USB2.0 PC CAMERA
+(**) USB2.0 PC CAMERA: always reports core events
+(**) USB2.0 PC CAMERA: Device: "/dev/input/event6"
+(II) USB2.0 PC CAMERA: Found keys
+(II) USB2.0 PC CAMERA: Configuring as keyboard
+(II) XINPUT: Adding extended input device "USB2.0 PC CAMERA" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "de"
@@ -1212,7 +1185,7 @@
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
-(**) Power Button: Device: "/dev/input/event4"
+(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
@@ -1221,20 +1194,9 @@
(**) Option "xkb_layout" "de"
(**) Option "xkb_variant" "nodeadkeys"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
-(II) config/hal: Adding input device DVB on-card IR receiver
-(**) DVB on-card IR receiver: always reports core events
-(**) DVB on-card IR receiver: Device: "/dev/input/event8"
-(II) DVB on-card IR receiver: Found keys
-(II) DVB on-card IR receiver: Configuring as keyboard
-(II) XINPUT: Adding extended input device "DVB on-card IR receiver" (type: KEYBOARD)
-(**) Option "xkb_rules" "evdev"
-(**) Option "xkb_model" "pc105"
-(**) Option "xkb_layout" "de"
-(**) Option "xkb_variant" "nodeadkeys"
-(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
(II) config/hal: Adding input device Sleep Button
(**) Sleep Button: always reports core events
-(**) Sleep Button: Device: "/dev/input/event5"
+(**) Sleep Button: Device: "/dev/input/event1"
(II) Sleep Button: Found keys
(II) Sleep Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
@@ -1245,7 +1207,7 @@
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
-(**) Power Button: Device: "/dev/input/event6"
+(**) Power Button: Device: "/dev/input/event2"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
@@ -1254,6 +1216,17 @@
(**) Option "xkb_layout" "de"
(**) Option "xkb_variant" "nodeadkeys"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
+(II) config/hal: Adding input device DVB on-card IR receiver
+(**) DVB on-card IR receiver: always reports core events
+(**) DVB on-card IR receiver: Device: "/dev/input/event8"
+(II) DVB on-card IR receiver: Found keys
+(II) DVB on-card IR receiver: Configuring as keyboard
+(II) XINPUT: Adding extended input device "DVB on-card IR receiver" (type: KEYBOARD)
+(**) Option "xkb_rules" "evdev"
+(**) Option "xkb_model" "pc105"
+(**) Option "xkb_layout" "de"
+(**) Option "xkb_variant" "nodeadkeys"
+(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
@@ -1285,7 +1258,7 @@
(II) UnloadModule: "evdev"
(II) config/hal: Adding input device IR-receiver inside an USB DVB receiver
(**) IR-receiver inside an USB DVB receiver: always reports core events
-(**) IR-receiver inside an USB DVB receiver: Device: "/dev/input/event1"
+(**) IR-receiver inside an USB DVB receiver: Device: "/dev/input/event4"
(II) IR-receiver inside an USB DVB receiver: Found keys
(II) IR-receiver inside an USB DVB receiver: Configuring as keyboard
(II) XINPUT: Adding extended input device "IR-receiver inside an USB DVB receiver" (type: KEYBOARD)
@@ -1296,7 +1269,7 @@
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
(II) config/hal: Adding input device USB2.0 PC CAMERA
(**) USB2.0 PC CAMERA: always reports core events
-(**) USB2.0 PC CAMERA: Device: "/dev/input/event2"
+(**) USB2.0 PC CAMERA: Device: "/dev/input/event6"
(II) USB2.0 PC CAMERA: Found keys
(II) USB2.0 PC CAMERA: Configuring as keyboard
(II) XINPUT: Adding extended input device "USB2.0 PC CAMERA" (type: KEYBOARD)
@@ -1307,7 +1280,7 @@
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
(II) config/hal: Adding input device USB Audio
(**) USB Audio: always reports core events
-(**) USB Audio: Device: "/dev/input/event3"
+(**) USB Audio: Device: "/dev/input/event7"
(II) USB Audio: Found keys
(II) USB Audio: Configuring as keyboard
(II) XINPUT: Adding extended input device "USB Audio" (type: KEYBOARD)
@@ -2498,3 +2471,39 @@
(II) RADEON(0): Output: S-video, Detected Monitor Type: 0
(II) RADEON(0): EDID for output S-video
Changing OV0_BASE_ADDR from 0xf0000000 to 0xf0c00000
+disable primary dac
+disable primary dac
+enable primary dac
+(II) Power Button: Close
+(II) UnloadModule: "evdev"
+(II) Sleep Button: Close
+(II) UnloadModule: "evdev"
+(II) Power Button: Close
+(II) UnloadModule: "evdev"
+(II) DVB on-card IR receiver: Close
+(II) UnloadModule: "evdev"
+(II) Macintosh mouse button emulation: Close
+(II) UnloadModule: "evdev"
+(II) IR-receiver inside an USB DVB receiver: Close
+(II) UnloadModule: "evdev"
+(II) USB2.0 PC CAMERA: Close
+(II) UnloadModule: "evdev"
+(II) USB Audio: Close
+(II) UnloadModule: "evdev"
+(II) MLK Typhoon Deskset: Close
+(II) UnloadModule: "evdev"
+(II) MLK Typhoon Deskset: Close
+(II) UnloadModule: "evdev"
+disable primary dac
+(II) RADEON(0): RADEONRestoreMemMapRegisters() :
+(II) RADEON(0): MC_FB_LOCATION : 0x1fff0000 0xf7fff000
+(II) RADEON(0): MC_AGP_LOCATION : 0x27ff2000
+finished PLL2
+finished PLL1
+Entering Restore TV
+Restore TV PLL
+Restore TVHV
+Restore TV Restarts
+Restore Timing Tables
+Restore TV standard
+Leaving Restore TV
schorpp@tom1:~$
Trying upgrade to X.org 1.7.0 and will report
y
tom
-- Package-specific info:
** Kernel log: boot messages should be attached
** Model information
sys_vendor: MSI
product_name: MS-6702E
product_version: 1.0
chassis_vendor: To Be Filled By O.E.M.
chassis_version: To Be Filled By O.E.M.
bios_vendor: American Megatrends Inc.
bios_version: 080011
board_vendor: MSI
board_name: MS-6702E
board_version: 1.0
** PCI devices:
00:00.0 Host bridge [0600]: VIA Technologies, Inc. K8T800Pro Host Bridge [1106:0282]
Subsystem: VIA Technologies, Inc. K8T800Pro Host Bridge [1106:0282]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR+ INTx-
Latency: 32
Region 0: Memory at e4000000 (32-bit, prefetchable) [size=64M]
Capabilities: <access denied>
Kernel driver in use: agpgart-amd64
00:00.1 Host bridge [0600]: VIA Technologies, Inc. K8T800Pro Host Bridge [1106:1282]
Subsystem: VIA Technologies, Inc. K8T800Pro Host Bridge [1106:1282]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:00.2 Host bridge [0600]: VIA Technologies, Inc. K8T800Pro Host Bridge [1106:2282]
Subsystem: VIA Technologies, Inc. K8T800Pro Host Bridge [1106:2282]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:00.3 Host bridge [0600]: VIA Technologies, Inc. K8T800Pro Host Bridge [1106:3282]
Subsystem: VIA Technologies, Inc. K8T800Pro Host Bridge [1106:3282]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:00.4 Host bridge [0600]: VIA Technologies, Inc. K8T800Pro Host Bridge [1106:4282]
Subsystem: VIA Technologies, Inc. K8T800Pro Host Bridge [1106:4282]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:00.7 Host bridge [0600]: VIA Technologies, Inc. K8T800Pro Host Bridge [1106:7282]
Subsystem: VIA Technologies, Inc. K8T800Pro Host Bridge [1106:7282]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT8237 PCI bridge [K8T800/K8T890 South] [1106:b188] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fbf00000-fbffffff
Prefetchable memory behind bridge: e8000000-faffffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:06.0 Multimedia controller [0480]: Philips Semiconductors SAA7146 [1131:7146] (rev 01)
Subsystem: KNC One Device [1894:0021]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (3750ns min, 9500ns max)
Interrupt: pin A routed to IRQ 17
Region 0: Memory at fbeffc00 (32-bit, non-prefetchable) [size=512]
Kernel driver in use: budget_av
00:07.0 Multimedia controller [0480]: Philips Semiconductors SAA7146 [1131:7146] (rev 01)
Subsystem: Siemens Nixdorf AG Fujitsu/Siemens DVB-C card rev1.5 [110a:0000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (3750ns min, 9500ns max)
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fbeff800 (32-bit, non-prefetchable) [size=512]
Kernel driver in use: dvb
00:0b.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet [10ec:8169] (rev 10)
Subsystem: Micro-Star International Co., Ltd. K8T NEO 2 motherboard [1462:702c]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (8000ns min, 16000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at d800 [size=256]
Region 1: Memory at fbeff400 (32-bit, non-prefetchable) [size=256]
Expansion ROM at fbec0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: r8169
00:0d.0 RAID bus controller [0104]: Promise Technology, Inc. PDC20579 SATAII 150 IDE Controller [105a:3574] (rev 02)
Subsystem: Promise Technology, Inc. PDC20579 SATAII 150 IDE Controller [105a:3574]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 72 (1000ns min, 4500ns max), Cache Line Size: 4 bytes
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at d400 [size=128]
Region 2: I/O ports at d000 [size=256]
Region 3: Memory at fbefe000 (32-bit, non-prefetchable) [size=4K]
Region 4: Memory at fbea0000 (32-bit, non-prefetchable) [size=128K]
Capabilities: <access denied>
Kernel driver in use: sata_promise
00:0e.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6306 Fire II IEEE 1394 OHCI Link Layer Controller [1106:3044] (rev 46) (prog-if 10 [OHCI])
Subsystem: Micro-Star International Co., Ltd. K8T NEO 2 motherboard [1462:702d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (8000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at fbefd800 (32-bit, non-prefetchable) [size=2K]
Region 1: I/O ports at c800 [size=128]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
00:0f.0 IDE interface [0101]: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller [1106:3149] (rev 80) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Micro-Star International Co., Ltd. K8T Neo 2 Motherboard [1462:7020]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin B routed to IRQ 20
Region 0: I/O ports at c400 [size=8]
Region 1: I/O ports at c000 [size=4]
Region 2: I/O ports at b800 [size=8]
Region 3: I/O ports at b400 [size=4]
Region 4: I/O ports at b000 [size=16]
Region 5: I/O ports at a800 [size=256]
Capabilities: <access denied>
Kernel driver in use: sata_via
00:0f.1 IDE interface [0101]: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] (rev 06) (prog-if 8a [Master SecP PriP])
Subsystem: Micro-Star International Co., Ltd. K8T NEO 2 motherboard [1462:7020]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin A routed to IRQ 20
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
Region 4: I/O ports at fc00 [size=16]
Capabilities: <access denied>
Kernel driver in use: VIA_IDE
00:10.0 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 81) (prog-if 00 [UHCI])
Subsystem: Micro-Star International Co., Ltd. K8T NEO 2 motherboard [1462:7020]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 21
Region 4: I/O ports at a400 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:10.1 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 81) (prog-if 00 [UHCI])
Subsystem: Micro-Star International Co., Ltd. K8T NEO 2 motherboard [1462:7020]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 21
Region 4: I/O ports at a000 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:10.2 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 81) (prog-if 00 [UHCI])
Subsystem: Micro-Star International Co., Ltd. K8T NEO 2 motherboard [1462:7020]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 9800 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:10.3 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 81) (prog-if 00 [UHCI])
Subsystem: Micro-Star International Co., Ltd. K8T NEO 2 motherboard [1462:7020]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 9400 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:10.4 USB Controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] (rev 86) (prog-if 20 [EHCI])
Subsystem: Micro-Star International Co., Ltd. K8T NEO 2 motherboard [1462:7020]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 21
Region 0: Memory at fbeff000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:11.0 ISA bridge [0601]: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South] [1106:3227]
Subsystem: Micro-Star International Co., Ltd. Device [1462:7020]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:11.5 Multimedia audio controller [0401]: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller [1106:3059] (rev 60)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7023]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 22
Region 0: I/O ports at 9000 [size=256]
Capabilities: <access denied>
Kernel driver in use: VIA 82xx Audio
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel driver in use: amd64_edac
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel driver in use: k8temp
01:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV350 AR [Radeon 9600] [1002:4152] (prog-if 00 [VGA controller])
Subsystem: Hightech Information System Ltd. Device [17af:2016]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (2000ns min), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at e000 [size=256]
Region 2: Memory at fbff0000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at fbfc0000 [disabled] [size=128K]
Capabilities: <access denied>
01:00.1 Display controller [0380]: ATI Technologies Inc RV350 AR [Radeon 9600] (Secondary) [1002:4172]
Subsystem: Hightech Information System Ltd. Device [17af:2017]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (2000ns min), Cache Line Size: 64 bytes
Region 0: Memory at e8000000 (32-bit, prefetchable) [size=128M]
Region 1: Memory at fbfe0000 (32-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
** USB devices:
Bus 001 Device 003: ID 04ca:f001 Lite-On Technology Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 010: ID 04fc:05d8 Sunplus Technology Co., Ltd
Bus 004 Device 009: ID 0557:7000 ATEN International Co., Ltd Hub
Bus 004 Device 008: ID 0d8c:0006 C-Media Electronics, Inc. Storm HP-USB500 5.1 Headset
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 004: ID 18ec:3290 Arkmicro Technologies Inc.
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Versions of packages linux-image-2.6.32-trunk-amd64 depends on:
ii debconf [debconf-2.0] 1.5.28 Debian configuration management sy
ii initramfs-tools [linux-initra 0.93.4 tools for generating an initramfs
ii module-init-tools 3.11-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-trunk-amd64 recommends:
ii firmware-linux-free 2.6.32-2 Binary firmware for various driver
Versions of packages linux-image-2.6.32-trunk-amd64 suggests:
ii grub 0.97-59 GRand Unified Bootloader (dummy pa
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-trunk-amd64 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
ii firmware-linux 0.22 Binary firmware for various driver
ii firmware-linux-nonfree 0.22 Binary firmware for various driver
pn firmware-qlogic <none> (no description available)
ii firmware-ralink 0.18 Binary firmware for Ralink RT2561,
-- debconf information excluded
Reply to: