--- Begin Message ---
Package: linux-2.6
Version: 2.6.32-1
Severity: important
Hi,
linux-image-2.6.32-trunk-686 needs some firmware files for radeon named
RV620_pfp.bin and RV620_me.bin, whereas the files provided by the
firmware-linux-nonfree package contain only RV620_cp.bin.
It looks like it's in a different format than what's needed.
Result is that the drm can't load the firmare, so KMS can't start,
so the driver can't use acceleration.
Would it be possible to provide it in a separate package ?
Thanks,
Xav
-- Package-specific info:
** Version:
Linux version 2.6.32-trunk-686 (Debian 2.6.32-1) (waldi@debian.org) (gcc version 4.3.4 (Debian 4.3.4-6) ) #1 SMP Mon Dec 7 21:35:21 UTC 2009
** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.32-trunk-686 root=UUID=8ba8abbb-db8f-4872-a4db-550cab7b8993 ro radeon.modeset=1 quiet
** Not tainted
** Kernel log:
[ 64.597499] usb 2-4.1.3: Manufacturer: Creative Technology Ltd
[ 64.597550] usb 2-4.1.3: configuration #1 chosen from 1 choice
[ 64.803354] usb 8-2.2: new full speed USB device using uhci_hcd and address 5
[ 65.189391] usb 8-2.2: New USB device found, idVendor=0a12, idProduct=0001
[ 65.189395] usb 8-2.2: New USB device strings: Mfr=0, Product=0, SerialNumber=3
[ 65.189397] usb 8-2.2: SerialNumber: UM0835B100051
[ 65.189448] usb 8-2.2: configuration #1 chosen from 1 choice
[ 66.951577] udev: starting version 149
[ 67.751198] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 67.848818] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 67.848822] ACPI: I/O resource 0000:00:1f.3 [0x400-0x41f] conflicts with ACPI region SMRG [0x400-0x40f]
[ 67.848871] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 68.452673] EDAC MC: Ver: 2.1.0 Dec 7 2009
[ 68.466663] EDAC MC0: Giving out device to 'x38_edac' 'x38': DEV 0000:00:00.0
[ 68.649746] usb-storage: device scan complete
[ 68.653317] scsi 6:0:0:0: Direct-Access SMSC 223 U HS-CF 3.60 PQ: 0 ANSI: 0
[ 68.656686] scsi 6:0:0:1: Direct-Access SMSC 223 U HS-MS 3.60 PQ: 0 ANSI: 0
[ 68.659811] scsi 6:0:0:2: Direct-Access SMSC 223 U HS-SM 3.60 PQ: 0 ANSI: 0
[ 68.662566] scsi 6:0:0:3: Direct-Access SMSC 223 U HS-SD/MMC 3.60 PQ: 0 ANSI: 0
[ 68.725567] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[ 68.729558] sd 6:0:0:1: [sdd] Attached SCSI removable disk
[ 68.733561] sd 6:0:0:2: [sde] Attached SCSI removable disk
[ 68.737066] sd 6:0:0:3: [sdf] Attached SCSI removable disk
[ 69.833173] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 69.833195] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 69.865013] hda-intel: no codecs found!
[ 69.865084] HDA Intel 0000:00:1b.0: PCI INT A disabled
[ 69.865115] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 69.865149] HDA Intel 0000:01:00.1: setting latency timer to 64
[ 69.922857] ACPI: SSDT cff8e0d0 001D2 (v01 AMI CPU1PM 00000001 INTL 20060113)
[ 69.923193] processor LNXCPU:00: registered as cooling_device0
[ 69.923396] ACPI: SSDT cff8e2b0 00143 (v01 AMI CPU2PM 00000001 INTL 20060113)
[ 69.923705] processor LNXCPU:01: registered as cooling_device1
[ 69.923917] ACPI: SSDT cff8e400 00143 (v01 AMI CPU3PM 00000001 INTL 20060113)
[ 69.924227] processor LNXCPU:02: registered as cooling_device2
[ 69.924432] ACPI: SSDT cff8e550 00143 (v01 AMI CPU4PM 00000001 INTL 20060113)
[ 69.924742] processor LNXCPU:03: registered as cooling_device3
[ 71.174808] Bluetooth: Core ver 2.15
[ 71.185777] NET: Registered protocol family 31
[ 71.185779] Bluetooth: HCI device and connection manager initialized
[ 71.185781] Bluetooth: HCI socket layer initialized
[ 71.735250] Linux video capture interface: v2.00
[ 71.767879] uvcvideo: Found UVC 1.00 device VF0380 Live! Cam Optia Pro (041e:4065)
[ 71.775575] input: VF0380 Live! Cam Optia Pro as /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4.1/2-4.1.3/2-4.1.3:1.0/input/input6
[ 71.775610] usbcore: registered new interface driver uvcvideo
[ 71.775612] USB Video Class driver (v0.1.0)
[ 71.787418] input: Logitech Logitech Cordless RumblePad 2 as /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4.1/2-4.1.1/2-4.1.1:1.0/input/input7
[ 71.787469] logitech 0003:046D:C219.0004: input,hidraw3: USB HID v1.10 Gamepad [Logitech Logitech Cordless RumblePad 2] on usb-0000:00:1d.7-4.1.1/input0
[ 71.787472] Force feedback for Logitech force feedback devices by Johann Deneux <johann.deneux@it.uu.se>
[ 71.837937] input: Logitech Logitech Cordless RumblePad 2 as /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4.1/2-4.1.2/2-4.1.2:1.0/input/input8
[ 71.837996] logitech 0003:046D:C219.0005: input,hidraw4: USB HID v1.10 Gamepad [Logitech Logitech Cordless RumblePad 2] on usb-0000:00:1d.7-4.1.2/input0
[ 71.837999] Force feedback for Logitech force feedback devices by Johann Deneux <johann.deneux@it.uu.se>
[ 71.923080] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 71.923154] usbcore: registered new interface driver btusb
[ 71.968153] 9:3:1: cannot get freq at ep 0x84
[ 71.977467] usbcore: registered new interface driver snd-usb-audio
[ 74.166741] Adding 1043240k swap on /dev/hdf6. Priority:-1 extents:1 across:1043240k
[ 74.606687] EXT3 FS on hdf5, internal journal
[ 75.505382] kjournald starting. Commit interval 5 seconds
[ 75.505623] EXT3 FS on sdb1, internal journal
[ 75.505627] EXT3-fs: mounted filesystem with ordered data mode.
[ 75.563329] kjournald starting. Commit interval 5 seconds
[ 75.563499] EXT3 FS on hdf7, internal journal
[ 75.563502] EXT3-fs: mounted filesystem with ordered data mode.
[ 77.987174] sky2 eth0: enabling interface
[ 77.987300] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 80.454948] sky2 eth0: Link is up at 1000 Mbps, full duplex, flow control both
[ 80.455073] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 91.272003] eth0: no IPv6 routers present
[ 91.800116] fuse init (API version 7.13)
[ 92.340313] microcode: CPU0 sig=0x1067a, pf=0x10, revision=0xa07
[ 92.340317] platform microcode: firmware: requesting intel-ucode/06-17-0a
[ 92.401738] microcode: CPU1 sig=0x1067a, pf=0x10, revision=0xa07
[ 92.401741] platform microcode: firmware: requesting intel-ucode/06-17-0a
[ 92.404520] microcode: CPU2 sig=0x1067a, pf=0x10, revision=0xa07
[ 92.404522] platform microcode: firmware: requesting intel-ucode/06-17-0a
[ 92.416804] microcode: CPU3 sig=0x1067a, pf=0x10, revision=0xa07
[ 92.416812] platform microcode: firmware: requesting intel-ucode/06-17-0a
[ 92.428146] Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 93.228311] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input9
[ 100.465485] apm: BIOS not found.
[ 110.481075] Bluetooth: L2CAP ver 2.14
[ 110.481077] Bluetooth: L2CAP socket layer initialized
[ 110.522249] Bluetooth: RFCOMM TTY layer initialized
[ 110.522253] Bluetooth: RFCOMM socket layer initialized
[ 110.522255] Bluetooth: RFCOMM ver 1.11
[ 110.766068] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 110.766070] Bluetooth: BNEP filters: protocol multicast
[ 110.854892] Bridge firewalling registered
[ 110.944918] Bluetooth: SCO (Voice Link) ver 0.6
[ 110.944921] Bluetooth: SCO socket layer initialized
[ 113.993423] lp: driver loaded but no devices found
[ 114.049564] ppdev: user-space parallel port driver
[ 119.184383] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 119.621829] RPC: Registered udp transport module.
[ 119.621832] RPC: Registered tcp transport module.
[ 119.621834] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 119.784651] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 119.940292] sky2 eth1: enabling interface
[ 119.940485] ADDRCONF(NETDEV_UP): eth1: link is not ready
** Model information
not available
** Loaded modules:
Module Size Used by
nfsd 193183 0
lockd 49433 1 nfsd
nfs_acl 1695 1 nfsd
auth_rpcgss 25064 1 nfsd
sunrpc 134584 4 nfsd,lockd,nfs_acl,auth_rpcgss
exportfs 2618 1 nfsd
ppdev 4058 0
lp 5570 0
parport 22554 2 ppdev,lp
sco 5837 2
bridge 32979 0
stp 996 1 bridge
bnep 7444 2
rfcomm 25131 4
l2cap 21677 16 bnep,rfcomm
crc16 1027 1 l2cap
acpi_cpufreq 4943 0
cpufreq_userspace 1476 0
cpufreq_stats 1940 0
cpufreq_conservative 4018 0
cpufreq_powersave 602 0
kvm_intel 32482 0
kvm 180269 1 kvm_intel
binfmt_misc 4907 1
uinput 4796 1
microcode 8470 0
fuse 43750 1
snd_usb_audio 49770 0
snd_usb_lib 10989 1 snd_usb_audio
btusb 7981 2
uvcvideo 45194 0
hid_logitech 5006 0
videodev 25541 1 uvcvideo
v4l1_compat 10250 2 uvcvideo,videodev
ff_memless 3008 1 hid_logitech
bluetooth 36327 9 sco,bnep,rfcomm,l2cap,btusb
joydev 6767 0
rfkill 10260 2 bluetooth
asus_atk0110 6770 0
snd_hda_codec_atihdmi 1687 1
processor 25871 1 acpi_cpufreq
serio_raw 2916 0
snd_hda_intel 15063 0
evdev 5609 18
snd_hda_codec 44938 2 snd_hda_codec_atihdmi,snd_hda_intel
snd_hwdep 4054 2 snd_usb_audio,snd_hda_codec
snd_pcm_oss 28479 0
snd_mixer_oss 10461 1 snd_pcm_oss
snd_pcm 47362 4 snd_usb_audio,snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_seq_midi 3480 0
snd_rawmidi 12313 2 snd_usb_lib,snd_seq_midi
snd_seq_midi_event 3684 1 snd_seq_midi
snd_seq 35435 2 snd_seq_midi,snd_seq_midi_event
snd_timer 12258 2 snd_pcm,snd_seq
snd_seq_device 3673 3 snd_seq_midi,snd_rawmidi,snd_seq
x38_edac 2251 0
edac_core 23121 2 x38_edac
snd 33587 11 snd_usb_audio,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore 3450 1 snd
snd_page_alloc 5037 2 snd_hda_intel,snd_pcm
i2c_i801 6334 0
pcspkr 1207 0
ext3 94121 3
jbd 32161 1 ext3
mbcache 3762 1 ext3
usb_storage 29721 0
usbhid 26916 1 hid_logitech
hid 50609 2 hid_logitech,usbhid
ide_gd_mod 17171 4
sd_mod 25781 2
crc_t10dif 1012 1 sd_mod
ide_pci_generic 1924 0
ata_generic 2015 0
uhci_hcd 16013 0
firewire_ohci 16501 0
pdc202xx_new 3117 3
pata_jmicron 1448 1
firewire_core 31043 1 firewire_ohci
crc_itu_t 1035 1 firewire_core
ide_core 64138 3 ide_gd_mod,ide_pci_generic,pdc202xx_new
ata_piix 16545 0
libata 113952 3 ata_generic,pata_jmicron,ata_piix
scsi_mod 101264 3 usb_storage,sd_mod,libata
ehci_hcd 27450 0
sky2 32973 0
usbcore 97974 9 snd_usb_audio,snd_usb_lib,btusb,uvcvideo,usb_storage,usbhid,uhci_hcd,ehci_hcd
nls_base 4541 1 usbcore
button 3586 0
thermal 9206 0
fan 2586 0
thermal_sys 9378 3 processor,thermal,fan
dm_mirror 9671 0
dm_region_hash 5644 1 dm_mirror
dm_log 6369 2 dm_mirror,dm_region_hash
dm_mod 45978 2 dm_mirror,dm_log
radeon 398399 0
ttm 26064 1 radeon
drm_kms_helper 17239 1 radeon
drm 107536 3 radeon,ttm,drm_kms_helper
agpgart 19516 2 ttm,drm
i2c_algo_bit 3497 1 radeon
i2c_core 12648 5 videodev,i2c_i801,radeon,drm,i2c_algo_bit
** Network interface configuration:
auto lo
iface lo inet loopback
iface eth0 inet dhcp
auto eth0
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 90:e6:ba:6a:3a:d4 brd ff:ff:ff:ff:ff:ff
inet 192.168.0.184/24 brd 192.168.0.255 scope global eth0
inet6 fe80::92e6:baff:fe6a:3ad4/64 scope link
valid_lft forever preferred_lft forever
3: eth1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN qlen 1000
link/ether 90:e6:ba:6a:3a:d5 brd ff:ff:ff:ff:ff:ff
4: pan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN
link/ether 2a:f4:ed:7b:0a:15 brd ff:ff:ff:ff:ff:ff
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 64088 567 0 0 0 0 0 0 64088 567 0 0 0 0 0 0
eth0: 755490 2095 0 0 0 0 0 0 215720 1284 0 0 0 0 0 0
eth1: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
pan0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
*** Protocol statistics:
Ip:
2630 total packets received
4 with invalid addresses
0 forwarded
0 incoming packets discarded
2626 incoming packets delivered
1775 requests sent out
16 outgoing packets dropped
Icmp:
16 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
destination unreachable: 16
16 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 16
IcmpMsg:
InType3: 16
OutType3: 16
Tcp:
26 active connections openings
3 passive connection openings
0 failed connection attempts
0 connection resets received
3 connections established
2081 segments received
1595 segments send out
0 segments retransmited
0 bad segments received.
5 resets sent
Udp:
511 packets received
16 packets to unknown port received.
0 packet receive errors
160 packets sent
UdpLite:
TcpExt:
5 TCP sockets finished time wait in fast timer
56 delayed acks sent
1 packets directly queued to recvmsg prequeue.
1045 packet headers predicted
95 acknowledgments not containing data payload received
871 predicted acknowledgments
2 connections reset due to unexpected data
IpExt:
InMcastPkts: 35
OutMcastPkts: 25
InBcastPkts: 355
InOctets: 792740
OutOctets: 256465
InMcastOctets: 6098
OutMcastOctets: 5090
InBcastOctets: 71869
*** Device features:
eth0: 0x10983
eth1: 0x10983
lo: 0x13865
pan0: 0xff3865
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82X38/X48 Express DRAM Controller [8086:29e0] (rev 01)
Subsystem: ASUSTeK Computer Inc. Device [1043:8295]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR+ INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: x38_edac
00:01.0 PCI bridge [0604]: Intel Corporation 82X38/X48 Express Host-Primary PCI Express Bridge [8086:29e1] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: fe700000-fe7fffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1a.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8277]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at 9800 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8277]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 9880 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8277]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 9c00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 02) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8277]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fe6ffc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:8277]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 22
Region 0: Memory at fe6f8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: f0000000-f03fffff
Prefetchable memory behind bridge: 00000000fdf00000-00000000fdffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 [8086:2944] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fea00000-feafffff
Prefetchable memory behind bridge: 00000000f0400000-00000000f05fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.4 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 [8086:2948] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fe900000-fe9fffff
Prefetchable memory behind bridge: 00000000f0600000-00000000f07fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.5 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 [8086:294a] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: fe800000-fe8fffff
Prefetchable memory behind bridge: 00000000f0800000-00000000f09fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8277]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at 9080 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8277]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 9400 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8277]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 9480 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 02) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8277]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fe6ff800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 92) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=06, subordinate=06, sec-latency=32
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: feb00000-febfffff
Prefetchable memory behind bridge: 00000000f0a00000-00000000f0afffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR+
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801IR (ICH9R) LPC Interface Controller [8086:2916] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:8277]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 IDE interface [0101]: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 4 port SATA IDE Controller [8086:2920] (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: ASUSTeK Computer Inc. Device [1043:8277]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 22
Region 0: I/O ports at 8000 [size=8]
Region 1: I/O ports at 7c00 [size=4]
Region 2: I/O ports at 7880 [size=8]
Region 3: I/O ports at 7800 [size=4]
Region 4: I/O ports at 7480 [size=16]
Region 5: I/O ports at 7400 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:8277]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fe6ff400 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 0400 [size=32]
00:1f.5 IDE interface [0101]: Intel Corporation 82801I (ICH9 Family) 2 port SATA IDE Controller [8086:2926] (rev 02) (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. Device [1043:8277]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 22
Region 0: I/O ports at 9000 [size=8]
Region 1: I/O ports at 8c00 [size=4]
Region 2: I/O ports at 8880 [size=8]
Region 3: I/O ports at 8800 [size=4]
Region 4: I/O ports at 8480 [size=16]
Region 5: I/O ports at 8400 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
01:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV630 [Radeon HD 2600 Series] [1002:9589] (prog-if 00 [VGA controller])
Subsystem: Giga-byte Technology Device [1458:2180]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at fe7e0000 (64-bit, non-prefetchable) [size=64K]
Region 4: I/O ports at a000 [size=256]
Expansion ROM at fe7c0000 [disabled] [size=128K]
Capabilities: <access denied>
01:00.1 Audio device [0403]: ATI Technologies Inc RV630/M76 audio device [Radeon HD 2600 Series] [1002:aa08]
Subsystem: Giga-byte Technology Device [1458:aa08]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fe7fc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
02:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8056 PCI-E Gigabit Ethernet Controller [11ab:4364] (rev 12)
Subsystem: ASUSTeK Computer Inc. Device [1043:81f8]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 30
Region 0: Memory at fe8fc000 (64-bit, non-prefetchable) [size=16K]
Region 2: I/O ports at b800 [size=256]
Expansion ROM at fe8c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: sky2
03:00.0 IDE interface [0101]: JMicron Technology Corp. JMB368 IDE controller [197b:2368] (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. Device [1043:824f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at cc00 [size=8]
Region 1: I/O ports at c880 [size=4]
Region 2: I/O ports at c800 [size=8]
Region 3: I/O ports at c480 [size=4]
Region 4: I/O ports at c400 [size=16]
Expansion ROM at fe9f0000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: pata_jmicron
04:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8056 PCI-E Gigabit Ethernet Controller [11ab:4364] (rev 12)
Subsystem: ASUSTeK Computer Inc. Device [1043:81f8]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 29
Region 0: Memory at feafc000 (64-bit, non-prefetchable) [size=16K]
Region 2: I/O ports at d800 [size=256]
Expansion ROM at feac0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: sky2
06:02.0 Mass storage controller [0180]: Promise Technology, Inc. 20269 [105a:4d69] (rev 02) (prog-if 85)
Subsystem: Promise Technology, Inc. Ultra133TX2 [105a:4d68]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (1000ns min, 4500ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at ec00 [size=8]
Region 1: I/O ports at e880 [size=4]
Region 2: I/O ports at e800 [size=8]
Region 3: I/O ports at e480 [size=4]
Region 4: I/O ports at e400 [size=16]
Region 5: Memory at febfc000 (32-bit, non-prefetchable) [size=16K]
Expansion ROM at f0a00000 [disabled] [size=16K]
Capabilities: <access denied>
Kernel driver in use: Promise_IDE
06:03.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6306 Fire II IEEE 1394 OHCI Link Layer Controller [1106:3044] (rev c0) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. M4A series motherboard [1043:81fe]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (8000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at febfb800 (32-bit, non-prefetchable) [size=2K]
Region 1: I/O ports at e080 [size=128]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
** USB devices:
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 004: ID 413c:2010 Dell Computer Corp.
Bus 008 Device 005: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode)
Bus 008 Device 003: ID 413c:1003 Dell Computer Corp.
Bus 008 Device 002: ID 046d:c508 Logitech, Inc. Cordless Trackball
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 009: ID 041e:4065 Creative Technology, Ltd
Bus 002 Device 008: ID 046d:c219 Logitech, Inc. Cordless RumblePad 2
Bus 002 Device 007: ID 046d:c219 Logitech, Inc. Cordless RumblePad 2
Bus 002 Device 006: ID 0424:223a Standard Microsystems Corp. 8-in-1 Card Reader
Bus 002 Device 005: ID 0424:2504 Standard Microsystems Corp. USB 2.0 Hub
Bus 002 Device 002: ID 0424:2502 Standard Microsystems Corp.
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: i386 (i686)
Kernel: Linux 2.6.32-trunk-686 (SMP w/4 CPU cores)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.32-trunk-686 depends on:
ii debconf [debconf-2.0] 1.5.28 Debian configuration management sy
ii initramfs-tools [linux-initra 0.93.4 tools for generating an initramfs
ii module-init-tools 3.11-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-trunk-686 recommends:
ii firmware-linux-free 2.6.32-1 Binary firmware for various driver
ii libc6-i686 2.10.2-2 GNU C Library: Shared libraries [i
Versions of packages linux-image-2.6.32-trunk-686 suggests:
ii grub 0.97-59 GRand Unified Bootloader (dummy pa
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-trunk-686 is related to:
ii firmware-bnx2 0.21 Binary firmware for Broadcom NetXt
ii firmware-bnx2x 0.21 Binary firmware for Broadcom NetXt
ii firmware-ipw2x00 0.21 Binary firmware for Intel Pro Wire
ii firmware-ivtv 0.21 Binary firmware for iTVC15-family
ii firmware-iwlwifi 0.21 Binary firmware for Intel Wireless
ii firmware-linux 0.21 Binary firmware for various driver
ii firmware-linux-nonfree 0.21 Binary firmware for various driver
ii firmware-qlogic 0.21 Binary firmware for QLogic IBA7220
ii firmware-ralink 0.21 Binary firmware for Ralink RT2561,
-- debconf information:
linux-image-2.6.32-trunk-686/postinst/bootloader-test-error-2.6.32-trunk-686:
* linux-image-2.6.32-trunk-686/postinst/missing-firmware-2.6.32-trunk-686:
linux-image-2.6.32-trunk-686/prerm/would-invalidate-boot-loader-2.6.32-trunk-686: true
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.32-trunk-686/postinst/depmod-error-initrd-2.6.32-trunk-686: false
linux-image-2.6.32-trunk-686/prerm/removing-running-kernel-2.6.32-trunk-686: true
linux-image-2.6.32-trunk-686/postinst/bootloader-error-2.6.32-trunk-686:
--- End Message ---