Bug#560719: linux-image-2.6.30-2-amd64: kernel panics with cannot open /root/dev/console
Package: linux-image-2.6.30-2-amd64
Version: 2.6.30-8squeeze1
Severity: normal
Debian Squeeze amd64:
The system does not boot at all, if the following menu entry from grub.cfg is used:
menuentry "Debian GNU/Linux, Linux 2.6.30-2-amd64" {
insmod ext2
set root=(hd0,1)
search --no-floppy --fs-uuid --set aa7cc9cc-7acb-4fdd-9c9a-f77824d8f8b3
linux /vmlinuz-2.6.30-2-amd64 root=UUID=5bf94eae-110c-4a54-8e69-4aa26ab92565 ro quiet
initrd /initrd.img-2.6.30-2-amd64
}
Using:
menuentry "Debian GNU/Linux, Linux 2.6.30-2-amd64 (recovery mode)" {
insmod ext2
set root=(hd0,1)
search --no-floppy --fs-uuid --set aa7cc9cc-7acb-4fdd-9c9a-f77824d8f8b3
linux /vmlinuz-2.6.30-2-amd64 root=UUID=5bf94eae-110c-4a54-8e69-4aa26ab92565 ro single
initrd /initrd.img-2.6.30-2-amd64
}
the system boots in about 3 out of 4 cases.
The message left on the screen at the moment of the kernel panic is:
kill: 18: no such process
/init: 253: cannot open /root/dev/console: no such file
My hardware consists of a Core2 Quad Q8200 CPU, 4GB RAM and a main board with an Intel G43 chipset.
-- Package-specific info:
** Version:
Linux version 2.6.30-2-amd64 (Debian 2.6.30-8squeeze1) (dannf@debian.org) (gcc version 4.3.4 (Debian 4.3.4-5) ) #1 SMP Mon Dec 7 05:21:45 UTC 2009
** Command line:
BOOT_IMAGE=/vmlinuz-2.6.30-2-amd64 root=UUID=5bf94eae-110c-4a54-8e69-4aa26ab92565 ro single
** Tainted: G W (512)
** Kernel log:
[ 2.989268] ide-cd: hdb: ATAPI 48X DVD-ROM drive, 256kB Cache
[ 2.994653] sda1 sda2 sda3 sda4
[ 3.004664] sd 0:0:0:0: [sda] Attached SCSI disk
[ 6.215442] PM: Starting manual resume from disk
[ 6.234807] kjournald starting. Commit interval 5 seconds
[ 6.234868] EXT3-fs: mounted filesystem with ordered data mode.
[ 6.979301] udev: starting version 146
[ 7.026051] usb-storage: device scan complete
[ 7.030431] scsi 6:0:0:0: Direct-Access Generic Flash HS-CF 4.44 PQ: 0 ANSI: 0
[ 7.033661] scsi 6:0:0:1: Direct-Access Generic Flash HS-COMBO 4.44 PQ: 0 ANSI: 0
[ 7.038121] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 7.088494] sd 6:0:0:1: [sdc] Attached SCSI removable disk
[ 7.272410] parport_pc 00:09: reported by Plug and Play ACPI
[ 7.272510] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 7.279101] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 7.279193] ACPI: Power Button [PWRF]
[ 7.279276] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
[ 7.279351] ACPI: Power Button [PWRB]
[ 7.285179] ACPI: SSDT 00000000bdce7900 0022A (v01 PmRef Cpu0Ist 00003000 INTL 20040311)
[ 7.285493] Marking TSC unstable due to TSC halts in idle
[ 7.285591] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 7.285727] processor ACPI_CPU:00: registered as cooling_device0
[ 7.285769] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 7.286064] ACPI: SSDT 00000000bdce7dc0 00152 (v01 PmRef Cpu1Ist 00003000 INTL 20040311)
[ 7.286453] ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU1._PDC] (Node ffff88013fae3550), AE_ALREADY_EXISTS
[ 7.286573] ACPI: Marking method _PDC as Serialized because of AE_ALREADY_EXISTS error
[ 7.286825] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 7.287002] processor ACPI_CPU:01: registered as cooling_device1
[ 7.287057] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 7.287362] ACPI: SSDT 00000000bdce7f20 00152 (v01 PmRef Cpu2Ist 00003000 INTL 20040311)
[ 7.287753] ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU2._PDC] (Node ffff88013fae34d0), AE_ALREADY_EXISTS
[ 7.287872] ACPI: Marking method _PDC as Serialized because of AE_ALREADY_EXISTS error
[ 7.288173] ACPI: CPU2 (power states: C1[C1] C2[C2] C3[C3])
[ 7.288316] processor ACPI_CPU:02: registered as cooling_device2
[ 7.288367] ACPI: Processor [CPU2] (supports 8 throttling states)
[ 7.288739] ACPI: SSDT 00000000bdce8080 00152 (v01 PmRef Cpu3Ist 00003000 INTL 20040311)
[ 7.289156] ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU3._PDC] (Node ffff88013fae3450), AE_ALREADY_EXISTS
[ 7.289276] ACPI: Marking method _PDC as Serialized because of AE_ALREADY_EXISTS error
[ 7.289557] ACPI: CPU3 (power states: C1[C1] C2[C2] C3[C3])
[ 7.289699] processor ACPI_CPU:03: registered as cooling_device3
[ 7.289741] ACPI: Processor [CPU3] (supports 8 throttling states)
[ 7.413587] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 7.516087] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 7.548715] alloc irq_desc for 22 on cpu 0 node 0
[ 7.548717] alloc kstat_irqs on cpu 0 node 0
[ 7.548725] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 7.548851] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 7.658713] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6
[ 8.145839] Adding 9775544k swap on /dev/sda3. Priority:-1 extents:1 across:9775544k
[ 8.255111] EXT3 FS on sda2, internal journal
[ 8.439893] it87: Found IT8718F chip at 0x290, revision 5
[ 8.439955] it87: in3 is VCC (+5V)
[ 8.443517] coretemp coretemp.0: Using relative temperature scale!
[ 8.443619] coretemp coretemp.1: Using relative temperature scale!
[ 8.443712] coretemp coretemp.2: Using relative temperature scale!
[ 8.443795] coretemp coretemp.3: Using relative temperature scale!
[ 9.005708] kjournald starting. Commit interval 5 seconds
[ 9.006073] EXT3 FS on sda1, internal journal
[ 9.006132] EXT3-fs: mounted filesystem with ordered data mode.
[ 9.026388] kjournald starting. Commit interval 5 seconds
[ 9.026927] EXT3 FS on sda4, internal journal
[ 9.026990] EXT3-fs: mounted filesystem with ordered data mode.
[ 9.533626] Bridge firewalling registered
[ 9.541732] device eth2 entered promiscuous mode
[ 9.543308] r8169: eth2: link up
[ 9.543352] r8169: eth2: link up
[ 9.545879] br0: port 1(eth2) entering learning state
[ 12.044035] br0: port 1(eth2) entering forwarding state
[ 15.730818] RPC: Registered udp transport module.
[ 15.730874] RPC: Registered tcp transport module.
[ 15.801514] Slow work thread pool: Starting up
[ 15.801662] Slow work thread pool: Ready
[ 15.801754] FS-Cache: Loaded
[ 15.857796] FS-Cache: Netfs 'nfs' registered for caching
[ 15.895084] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 20.088018] br0: no IPv6 routers present
[ 20.384026] eth2: no IPv6 routers present
[ 25.669196] svc: failed to register lockdv1 RPC service (errno 97).
[ 25.669665] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 25.680886] NFSD: starting 90-second grace period
[ 25.879422] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[ 25.879426] vboxdrv: Successfully done.
[ 25.879428] vboxdrv: Found 4 processor cores.
[ 25.879477] VBoxDrv: dbg - g_abExecMemory=ffffffffa03a7880
[ 25.879682] vboxdrv: fAsync=0 offMin=0x325 offMax=0x79fb
[ 25.879728] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 25.879730] vboxdrv: Successfully loaded version 3.0.12 (interface 0x00110000).
[ 26.135079] VBoxNetFlt: dbg - g_abExecMemory=ffffffffa0543500
[ 26.149890] VBoxNetAdp: dbg - g_abExecMemory=ffffffffa055a160
[ 28.486720] [drm] Initialized drm 1.1.0 20060810
[ 28.506227] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 28.506231] pci 0000:00:02.0: setting latency timer to 64
[ 28.521127] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[ 28.521129] [drm] MTRR allocation failed. Graphics performance may suffer.
[ 28.521147] alloc irq_desc for 28 on cpu 0 node 0
[ 28.521149] alloc kstat_irqs on cpu 0 node 0
[ 28.521158] pci 0000:00:02.0: irq 28 for MSI/MSI-X
[ 28.521179] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 853.723080] reportbug[3019] trap divide error ip:7f1f1b42310c sp:7fff589f1cf0 error:0 in libgtk-x11-2.0.so.0.1800.3[7f1f1b2f5000+400000]
[ 863.193353] reportbug[3051] trap divide error ip:7fedc865910c sp:7fffb76b91e0 error:0 in libgtk-x11-2.0.so.0.1800.3[7fedc852b000+400000]
** Loaded modules:
Module Size Used by
i915 168328 1
drm 172512 2 i915
i2c_algo_bit 5988 1 i915
video 21884 1 i915
output 3472 1 video
vboxnetadp 83068 0
vboxnetflt 89340 0
vboxdrv 1693612 1 vboxnetflt
nfsd 268496 9
exportfs 4640 1 nfsd
nfs 257808 0
lockd 68084 2 nfsd,nfs
fscache 41480 1 nfs
nfs_acl 3264 2 nfsd,nfs
auth_rpcgss 40864 2 nfsd,nfs
sunrpc 196600 10 nfsd,nfs,lockd,nfs_acl,auth_rpcgss
bridge 48128 0
stp 2868 1 bridge
coretemp 6656 0
it87 23624 0
hwmon_vid 3072 1 it87
acpi_cpufreq 8912 0
snd_hda_codec_intelhdmi 13232 1
snd_hda_codec_realtek 250372 1
snd_hda_intel 26680 3
snd_hda_codec 75264 3 snd_hda_codec_intelhdmi,snd_hda_codec_realtek,snd_hda_intel
snd_pcsp 10588 1
snd_hwdep 8152 1 snd_hda_codec
snd_pcm_oss 37200 0
snd_mixer_oss 15072 1 snd_pcm_oss
i2c_i801 10464 0
snd_pcm 78472 4 snd_hda_intel,snd_hda_codec,snd_pcsp,snd_pcm_oss
i2c_core 25424 4 i915,drm,i2c_algo_bit,i2c_i801
processor 40144 5 acpi_cpufreq
button 6512 0
parport_pc 27080 0
parport 38224 1 parport_pc
snd_timer 21856 1 snd_pcm
snd 63880 18 snd_hda_codec_intelhdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_pcsp,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
soundcore 7984 1 snd
snd_page_alloc 9936 2 snd_hda_intel,snd_pcm
evdev 10448 11
ext3 122544 3
jbd 47992 1 ext3
mbcache 8804 1 ext3
ide_cd_mod 29016 0
cdrom 34344 1 ide_cd_mod
sd_mod 33672 5
ide_pci_generic 4964 0
crc_t10dif 2096 1 sd_mod
usbhid 37232 0
ata_generic 5924 0
hid 41328 1 usbhid
usb_storage 61584 0
uhci_hcd 22160 0
ahci 36448 4
firewire_ohci 22324 0
libata 175452 2 ata_generic,ahci
it8213 4100 0
ide_core 104736 3 ide_cd_mod,ide_pci_generic,it8213
firewire_core 44852 1 firewire_ohci
crc_itu_t 2720 1 firewire_core
scsi_mod 158576 3 sd_mod,usb_storage,libata
r8169 32452 0
mii 5600 1 r8169
ehci_hcd 33820 0
intel_agp 28976 1
floppy 55400 0
thermal 15936 0
fan 5240 0
thermal_sys 16448 4 video,processor,thermal,fan
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 4 Series Chipset DRAM Controller [8086:2e20] (rev 03)
Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:5000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation 4 Series Chipset Integrated Graphics Controller [8086:2e22] (rev 03) (prog-if 00 [VGA controller])
Subsystem: Giga-byte Technology Device [1458:d000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 28
Region 0: Memory at e1000000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at e200 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
00:02.1 Display controller [0380]: Intel Corporation 4 Series Chipset Integrated Graphics Controller [8086:2e23] (rev 03)
Subsystem: Giga-byte Technology Device [1458:d000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at e1400000 (64-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>
00:1a.0 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 [8086:3a37] (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at e600 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.1 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 [8086:3a38] (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at e000 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.2 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 [8086:3a39] (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at e100 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.7 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 [8086:3a3c] (prog-if 20 [EHCI])
Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:5006]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at e1705000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller [8086:3a3e]
Subsystem: Giga-byte Technology Device [1458:a002]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at e1700000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 1 [8086:3a40] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
00:1c.5 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 6 [8086:3a4a] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: e0000000-e0ffffff
Prefetchable memory behind bridge: 00000000e1500000-00000000e15fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
00:1d.0 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 [8086:3a34] (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at e300 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 [8086:3a35] (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at e400 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 [8086:3a36] (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at e500 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 [8086:3a3a] (prog-if 20 [EHCI])
Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:5006]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at e1704000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 90) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: e1600000-e16fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801JIB (ICH10) LPC Interface Controller [8086:3a18]
Subsystem: Giga-byte Technology Device [1458:5001]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 SATA controller [0106]: Intel Corporation 82801JI (ICH10 Family) SATA AHCI Controller [8086:3a22] (prog-if 01 [AHCI 1.0])
Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:b005]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 27
Region 0: I/O ports at e700 [size=8]
Region 1: I/O ports at e800 [size=4]
Region 2: I/O ports at e900 [size=8]
Region 3: I/O ports at ea00 [size=4]
Region 4: I/O ports at eb00 [size=32]
Region 5: Memory at e1706000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 82801JI (ICH10 Family) SMBus Controller [8086:3a30]
Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:5001]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at e1707000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 0500 [size=32]
Kernel driver in use: i801_smbus
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 02)
Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:e000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 26
Region 0: I/O ports at c000 [size=256]
Region 2: Memory at e1510000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at e1500000 (64-bit, prefetchable) [size=64K]
[virtual] Expansion ROM at e1520000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: r8169
03:05.0 IDE interface [0101]: Integrated Technology Express, Inc. IT8213 IDE Controller [1283:8213] (prog-if 85 [Master SecO PriO])
Subsystem: Giga-byte Technology Device [1458:b000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (2000ns min, 2000ns max)
Interrupt: pin A routed to IRQ 21
Region 0: I/O ports at d000 [size=8]
Region 1: I/O ports at d100 [size=4]
Region 2: I/O ports at d200 [size=8]
Region 3: I/O ports at d300 [size=4]
Region 4: I/O ports at d400 [size=16]
Capabilities: <access denied>
Kernel driver in use: ITE8213_IDE
03:07.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link) [104c:8024] (prog-if 10 [OHCI])
Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:1000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (500ns min, 1000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 23
Region 0: Memory at e1604000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at e1600000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
-- System Information:
Debian Release: squeeze/sid
APT prefers testing-proposed-updates
APT policy: (500, 'testing-proposed-updates'), (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.30-2-amd64 (SMP w/4 CPU cores)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.30-2-amd64 depends on:
ii debconf [debconf-2.0] 1.5.28 Debian configuration management sy
ii initramfs-tools [linux-initra 0.93.4 tools for generating an initramfs
ii module-init-tools 3.11-1 tools for managing Linux kernel mo
linux-image-2.6.30-2-amd64 recommends no packages.
Versions of packages linux-image-2.6.30-2-amd64 suggests:
ii grub 0.97-59 GRand Unified Bootloader (dummy pa
pn linux-doc-2.6.30 <none> (no description available)
-- debconf information:
linux-image-2.6.30-2-amd64/preinst/bootloader-initrd-2.6.30-2-amd64: true
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.30-2-amd64/preinst/initrd-2.6.30-2-amd64:
linux-image-2.6.30-2-amd64/preinst/failed-to-move-modules-2.6.30-2-amd64:
linux-image-2.6.30-2-amd64/preinst/lilo-has-ramdisk:
linux-image-2.6.30-2-amd64/postinst/kimage-is-a-directory:
linux-image-2.6.30-2-amd64/prerm/would-invalidate-boot-loader-2.6.30-2-amd64: true
linux-image-2.6.30-2-amd64/postinst/old-initrd-link-2.6.30-2-amd64: true
linux-image-2.6.30-2-amd64/preinst/abort-install-2.6.30-2-amd64:
linux-image-2.6.30-2-amd64/postinst/bootloader-error-2.6.30-2-amd64:
linux-image-2.6.30-2-amd64/prerm/removing-running-kernel-2.6.30-2-amd64: true
linux-image-2.6.30-2-amd64/postinst/depmod-error-2.6.30-2-amd64: false
linux-image-2.6.30-2-amd64/postinst/depmod-error-initrd-2.6.30-2-amd64: false
linux-image-2.6.30-2-amd64/preinst/overwriting-modules-2.6.30-2-amd64: true
linux-image-2.6.30-2-amd64/preinst/lilo-initrd-2.6.30-2-amd64: true
linux-image-2.6.30-2-amd64/postinst/old-dir-initrd-link-2.6.30-2-amd64: true
linux-image-2.6.30-2-amd64/preinst/abort-overwrite-2.6.30-2-amd64:
linux-image-2.6.30-2-amd64/postinst/create-kimage-link-2.6.30-2-amd64: true
linux-image-2.6.30-2-amd64/postinst/bootloader-test-error-2.6.30-2-amd64:
linux-image-2.6.30-2-amd64/postinst/old-system-map-link-2.6.30-2-amd64: true
linux-image-2.6.30-2-amd64/preinst/elilo-initrd-2.6.30-2-amd64: true
Reply to: