Bug#530551: Wired network connection shuts down every 4-5min, then automaticaly restarts
On Mon, May 25, 2009 at 07:28:23PM +0200, Debian Bugs wrote:
> Package: base
> Version: 5.0
> Every 4-5 minutes the wired network connection shuts down. After a couple of seconds it back on again. Log text:
>
> May 25 19:22:23 Slejpner kernel: [ 3266.373370] ACPI: PCI Interrupt 0000:10:00.0[A] -> GSI 17 (level, low) -> IRQ 17
> May 25 19:22:23 Slejpner kernel: [ 3266.373370] iwl3945: Radio disabled by HW RF Kill switch
> May 25 19:22:23 Slejpner kernel: [ 3266.373370] ACPI: PCI interrupt for device 0000:10:00.0 disabled
> May 25 19:22:23 Slejpner pppd[4761]: Modem hangup
> May 25 19:22:23 Slejpner kernel: [ 3266.378069] eth0: late interrupt.
> May 25 19:22:23 Slejpner kernel: [ 3266.380211] b44: eth0: powering down PHY
> May 25 19:22:23 Slejpner pppd[4761]: Connect time 4.6 minutes.
> May 25 19:22:23 Slejpner pppd[4761]: Sent 273611 bytes, received 1097617 bytes.
> May 25 19:22:23 Slejpner pppd[4761]: Connection terminated.
> May 25 19:22:23 Slejpner kernel: [ 3266.547179] ACPI: PCI Interrupt 0000:10:00.0[A] -> GSI 17 (level, low) -> IRQ 17
> May 25 19:22:23 Slejpner kernel: [ 3266.547179] iwl3945: Radio disabled by HW RF Kill switch
> May 25 19:22:23 Slejpner kernel: [ 3266.547179] ACPI: PCI interrupt for device 0000:10:00.0 disabled
> May 25 19:22:23 Slejpner kernel: [ 3266.553069] ADDRCONF(NETDEV_UP): eth0: link is not ready
> May 25 19:22:23 Slejpner kernel: [ 3266.662871] b44: eth0: powering down PHY
> May 25 19:22:24 Slejpner kernel: [ 3267.870455] ADDRCONF(NETDEV_UP): eth0: link is not ready
> May 25 19:22:28 Slejpner kernel: [ 3271.219899] b44: eth0: Link is up at 100 Mbps, full duplex.
> May 25 19:22:28 Slejpner kernel: [ 3271.219909] b44: eth0: Flow control is off for TX and off for RX.
> May 25 19:22:28 Slejpner kernel: [ 3271.220250] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
> May 25 19:22:53 Slejpner pppd[4761]: PPP session is 3757
> May 25 19:22:53 Slejpner pppd[4761]: Using interface ppp0
> May 25 19:22:53 Slejpner pppd[4761]: Connect: ppp0 <--> eth0
> May 25 19:22:53 Slejpner pppd[4761]: CHAP authentication succeeded
> May 25 19:22:53 Slejpner pppd[4761]: CHAP authentication succeeded
> May 25 19:22:53 Slejpner pppd[4761]: peer from calling number 00:90:1A:A0:F4:5A authorized
> May 25 19:22:54 Slejpner pppd[4761]: local IP address 78.54.111.171
> May 25 19:22:54 Slejpner pppd[4761]: remote IP address 213.191.76.38
> May 25 19:22:54 Slejpner pppd[4761]: primary DNS address 213.191.74.19
> May 25 19:22:54 Slejpner pppd[4761]: secondary DNS address 62.109.123.197
>
> Other stuff that might help:
>
> arne@Slejpner:~$ uname -a
> Linux Slejpner 2.6.26-1-686 #1 SMP Sat Jan 10 18:29:31 UTC 2009 i686 GNU/Linux
> arne@Slejpner:~$
> arne@Slejpner:~$ ls -l /lib/libc.so.6
> lrwxrwxrwx 1 root root 11 16. Mai 00:36 /lib/libc.so.6 -> libc-2.7.so
> arne@Slejpner:~$
> arne@Slejpner:~$ dpkg -s libc6 | grep ^Version
> Version: 2.7-18
> arne@Slejpner:~$ reportbug -q --template -T none -s none -S normal -b --list-cc none -q base
> Detected character set: UTF-8
> Please change your locale if this is incorrect.
>
> Using 'Arne <MyDebian.bugs@web.de>' as your from address.
> Getting status for base...
> Will send report to Debian (per lsb_release).
Hi,
Sorry for the very long delay in following up.
The next release of Debian (6.0, code name Squeeze) will be based
on 2.6.32. Please test the current 2.6.32 from unstable and tell
us whether the problem persists. If so, we should report it upstream
to the kernel.org developers.
The 2.6.32 kernel is available from packages.debian.org and can
be installed in both Debian stable, testing and unstable
installations.
Thanks,
Moritz
Reply to: