Bug#552214: (no subject)
Subject: linux-image-2.6.26-1-686: je n'arrive pas à avoir un affichage graphique avec ma lenny et une carte graphique ATI Radeon HD
Package: linux-image-2.6.26-1-686
Version: 2.6.26-13lenny2
Severity: critical
Justification: breaks unrelated software
-- Package-specific info:
** Version:
Linux version 2.6.26-1-686 (Debian 2.6.26-13lenny2) (dannf@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Fri Mar 13 18:08:45 UTC 2009
** Command line:
root=/dev/sdc1 ro single
** Not tainted
** Kernel log:
[ 6.055401] usb 5-2: configuration #1 chosen from 1 choice
[ 6.063999] usb 5-2: New USB device found, idVendor=04d9, idProduct=048e
[ 6.064037] usb 5-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 6.064088] usbcore: registered new interface driver hiddev
[ 6.096888] input: Logitech Logitech USB Keyboard as /class/input/input0
[ 6.100903] input,hidraw0: USB HID v1.11 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:1d.0-1
[ 6.120787] input: Logitech Logitech USB Keyboard as /class/input/input1
[ 6.120787] input,hidraw1: USB HID v1.11 Device [Logitech Logitech USB Keyboard] on usb-0000:00:1d.0-1
[ 6.156787] input: HID 04d9:048e as /class/input/input2
[ 6.168806] ata3: SATA link down (SStatus 0 SControl 300)
[ 6.172785] input,hidraw2: USB HID v1.10 Mouse [HID 04d9:048e] on usb-0000:00:1d.0-2
[ 6.172785] usbcore: registered new interface driver usbhid
[ 6.172785] usbhid: v2.6:USB HID core driver
[ 6.538040] ata4: SATA link down (SStatus 0 SControl 300)
[ 6.967549] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 6.967587] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 6.967622] PCI: Setting latency timer of device 0000:03:00.0 to 64
[ 6.971512] scsi4 : ahci
[ 6.971512] scsi5 : ahci
[ 6.971512] ata5: SATA max UDMA/133 abar m8192@0xe7000000 port 0xe7000100 irq 19
[ 6.971512] ata6: SATA max UDMA/133 abar m8192@0xe7000000 port 0xe7000180 irq 19
[ 7.534400] ieee1394: Host added: ID:BUS[0-00:1023] GUID[007b0ced00001fd0]
[ 7.546321] ata5: SATA link down (SStatus 0 SControl 300)
[ 7.878328] ata6: SATA link down (SStatus 0 SControl 300)
[ 7.898306] JMB: IDE controller (0x197b:0x2363 rev 0x02) at PCI slot 0000:03:00.1
[ 7.898306] JMicron IDE 0000:03:00.1: enabling device (0000 -> 0001)
[ 7.898306] ACPI: PCI Interrupt 0000:03:00.1[B] -> GSI 16 (level, low) -> IRQ 16
[ 7.898306] JMB: 100% native mode on irq 16
[ 7.898306] PCI: Setting latency timer of device 0000:03:00.1 to 64
[ 7.898306] ide0: BM-DMA at 0xc400-0xc407
[ 7.898306] ide1: BM-DMA at 0xc408-0xc40f
[ 7.898306] Probing IDE interface ide0...
[ 9.239862] hda: TSSTcorp CDDVDW SH-S222A, ATAPI CD/DVD-ROM drive
[ 9.911519] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 9.911691] hda: drive side 80-wire cable detection failed, limiting max speed to UDMA33
[ 9.911725] hda: UDMA/33 mode selected
[ 9.912909] Probing IDE interface ide1...
[ 10.674139] ide0 at 0xc000-0xc007,0xc102 on irq 16
[ 10.680196] ide1 at 0xc200-0xc207,0xc302 on irq 16
[ 11.253139] Driver 'sd' needs updating - please use bus_type methods
[ 11.253139] sd 0:0:0:0: [sda] 293044655 512-byte hardware sectors (150039 MB)
[ 11.253139] sd 0:0:0:0: [sda] Write Protect is off
[ 11.253139] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 11.253139] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 11.253139] sd 0:0:0:0: [sda] 293044655 512-byte hardware sectors (150039 MB)
[ 11.253139] sd 0:0:0:0: [sda] Write Protect is off
[ 11.253139] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 11.253139] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 11.253139] sda: sda1
[ 11.257139] sd 0:0:0:0: [sda] Attached SCSI disk
[ 11.257139] sd 1:0:0:0: [sdb] 1953525168 512-byte hardware sectors (1000205 MB)
[ 11.257139] sd 1:0:0:0: [sdb] Write Protect is off
[ 11.257139] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 11.257139] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 11.257139] sd 1:0:0:0: [sdb] 1953525168 512-byte hardware sectors (1000205 MB)
[ 11.257139] sd 1:0:0:0: [sdb] Write Protect is off
[ 11.257139] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 11.257139] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 11.257139] sdb:<6>hda: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache
[ 11.261146] Uniform CD-ROM driver Revision: 3.20
[ 11.265139] sdb1
[ 11.265139] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 11.265139] sd 1:0:1:0: [sdc] 586072368 512-byte hardware sectors (300069 MB)
[ 11.265139] sd 1:0:1:0: [sdc] Write Protect is off
[ 11.265139] sd 1:0:1:0: [sdc] Mode Sense: 00 3a 00 00
[ 11.265139] sd 1:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 11.265139] sd 1:0:1:0: [sdc] 586072368 512-byte hardware sectors (300069 MB)
[ 11.265139] sd 1:0:1:0: [sdc] Write Protect is off
[ 11.265139] sd 1:0:1:0: [sdc] Mode Sense: 00 3a 00 00
[ 11.265139] sd 1:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 11.265139] sdc: sdc1 sdc2 < sdc5 >
[ 11.283516] sd 1:0:1:0: [sdc] Attached SCSI disk
[ 11.507760] PM: Starting manual resume from disk
[ 11.529437] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 11.529437] EXT3-fs: write access will be enabled during recovery.
[ 14.664001] kjournald starting. Commit interval 5 seconds
[ 14.664001] EXT3-fs: recovery complete.
[ 14.664001] EXT3-fs: mounted filesystem with ordered data mode.
[ 16.598039] udevd version 125 started
[ 17.251541] Linux agpgart interface v0.103
[ 17.370028] input: Power Button (FF) as /class/input/input3
[ 17.370028] input: PC Speaker as /class/input/input4
[ 17.390027] ACPI: Power Button (FF) [PWRF]
[ 17.390027] input: Power Button (CM) as /class/input/input5
[ 17.410045] ACPI: Power Button (CM) [PWRB]
[ 17.507989] parport_pc 00:08: reported by Plug and Play ACPI
[ 17.507989] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 17.515886] ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 18 (level, low) -> IRQ 18
[ 17.776256] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
[ 17.776256] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 17.846774] ACPI: PCI Interrupt 0000:01:00.1[B] -> GSI 17 (level, low) -> IRQ 17
[ 17.846841] PCI: Setting latency timer of device 0000:01:00.1 to 64
[ 18.477049] Adding 2650684k swap on /dev/sdc5. Priority:-1 extents:1 across:2650684k
[ 18.758192] EXT3 FS on sdc1, internal journal
[ 18.896152] loop: module loaded
[ 19.999790] NET: Registered protocol family 10
[ 19.999795] lo: Disabled Privacy Extensions
[ 20.490499] r8169: eth0: link up
[ 20.490499] r8169: eth0: link up
[ 34.161502] eth0: no IPv6 routers present
** Loaded modules:
Module Size Used by
ipv6 235300 14
sbp2 18572 0
loop 12748 0
snd_hda_intel 324248 0
snd_pcm_oss 32800 0
snd_mixer_oss 12320 1 snd_pcm_oss
snd_pcm 62596 2 snd_hda_intel,snd_pcm_oss
snd_seq_dummy 2660 0
snd_seq_oss 24992 0
snd_seq_midi 5728 0
snd_rawmidi 18496 1 snd_seq_midi
snd_seq_midi_event 6432 2 snd_seq_oss,snd_seq_midi
snd_seq 41456 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer 17800 2 snd_pcm,snd_seq
snd_seq_device 6380 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
snd 45604 9 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
i2c_i801 7920 0
parport_pc 22500 0
parport 30988 1 parport_pc
i2c_core 19828 1 i2c_i801
soundcore 6368 1 snd
pcspkr 2432 0
button 6096 0
snd_page_alloc 7816 2 snd_hda_intel,snd_pcm
intel_agp 22332 0
agpgart 28776 1 intel_agp
joydev 8480 0
evdev 8000 0
ext3 105512 1
jbd 39444 1 ext3
mbcache 7108 1 ext3
ide_cd_mod 27652 0
cdrom 30176 1 ide_cd_mod
sd_mod 22200 3
ide_pci_generic 3908 0 [permanent]
jmicron 2208 0 [permanent]
ide_core 96168 3 ide_cd_mod,ide_pci_generic,jmicron
usbhid 35904 0
hid 33184 1 usbhid
ff_memless 4392 1 usbhid
ata_piix 14180 2
ahci 23596 0
ohci1394 24944 0
ata_generic 4676 0
ieee1394 75800 2 sbp2,ohci1394
ehci_hcd 28428 0
libata 140384 3 ata_piix,ahci,ata_generic
scsi_mod 129356 3 sbp2,sd_mod,libata
uhci_hcd 18672 0
dock 8304 1 libata
r8169 23684 0
usbcore 118160 4 usbhid,ehci_hcd,uhci_hcd
thermal 15228 0
processor 32576 5 thermal
fan 4164 0
thermal_sys 10856 3 thermal,processor,fan
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 4 Series Chipset DRAM Controller [8086:2e20] (rev 03)
Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:5000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel modules: intel-agp
00:01.0 PCI bridge [0604]: Intel Corporation 4 Series Chipset PCI Express Root Port [8086:2e21] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: e4000000-e5ffffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1a.0 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 [8086:3a37] (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at e100 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.1 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 [8086:3a38] (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at e200 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.2 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 [8086:3a39] (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at e000 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.7 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 [8086:3a3c] (prog-if 20 [EHCI])
Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:5006]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at e7305000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1b.0 Audio device [0403]: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller [8086:3a3e]
Subsystem: Giga-byte Technology Device [1458:a002]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at e7300000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 1 [8086:3a40] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.3 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 4 [8086:3a46] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: e7000000-e70fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.4 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 5 [8086:3a48] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: e6000000-e6ffffff
Prefetchable memory behind bridge: 00000000e7100000-00000000e71fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1d.0 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 [8086:3a34] (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at e300 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 [8086:3a35] (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at e400 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 [8086:3a36] (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at e500 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 [8086:3a3a] (prog-if 20 [EHCI])
Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:5006]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at e7304000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 90) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
Memory behind bridge: e7200000-e72fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801JIB (ICH10) LPC Interface Controller [8086:3a18]
Subsystem: Giga-byte Technology Device [1458:5001]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 IDE interface [0101]: Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE Controller [8086:3a20] (prog-if 8a [Master SecP PriP])
Subsystem: Giga-byte Technology Device [1458:b002]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at f000 [size=16]
Region 5: I/O ports at f100 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
Kernel modules: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801JI (ICH10 Family) SMBus Controller [8086:3a30]
Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:5001]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at e7306000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 0500 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801
00:1f.5 IDE interface [0101]: Intel Corporation 82801JI (ICH10 Family) 2 port SATA IDE Controller [8086:3a26] (prog-if 85 [Master SecO PriO])
Subsystem: Giga-byte Technology Device [1458:b002]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at e700 [size=8]
Region 1: I/O ports at e800 [size=4]
Region 2: I/O ports at e900 [size=8]
Region 3: I/O ports at ea00 [size=4]
Region 4: I/O ports at eb00 [size=16]
Region 5: I/O ports at ec00 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
Kernel modules: ata_piix
01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Device [1002:9498] (prog-if 00 [VGA controller])
Subsystem: PC Partner Limited Device [174b:e920]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at e5000000 (64-bit, non-prefetchable) [size=64K]
Region 4: I/O ports at b000 [size=256]
[virtual] Expansion ROM at e4000000 [disabled] [size=128K]
Capabilities: <access denied>
01:00.1 Audio device [0403]: ATI Technologies Inc Device [1002:aa38]
Subsystem: PC Partner Limited Device [174b:aa38]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at e5010000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
03:00.0 SATA controller [0106]: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller [197b:2363] (rev 02) (prog-if 01 [AHCI 1.0])
Subsystem: Giga-byte Technology Device [1458:b000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 19
Region 5: Memory at e7000000 (32-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
03:00.1 IDE interface [0101]: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller [197b:2363] (rev 02) (prog-if 85 [Master SecO PriO])
Subsystem: Giga-byte Technology Device [1458:b000]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 16
Region 0: I/O ports at c000 [size=8]
Region 1: I/O ports at c100 [size=4]
Region 2: I/O ports at c200 [size=8]
Region 3: I/O ports at c300 [size=4]
Region 4: I/O ports at c400 [size=16]
Capabilities: <access denied>
Kernel driver in use: JMicron IDE
Kernel modules: jmicron
04:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 02)
Subsystem: Giga-byte Technology Device [1458:e000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 219
Region 0: I/O ports at d000 [size=256]
Region 2: Memory at e7110000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at e7100000 (64-bit, prefetchable) [size=64K]
[virtual] Expansion ROM at e7120000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: r8169
Kernel modules: r8169
05:07.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link) [104c:8024] (prog-if 10 [OHCI])
Subsystem: Giga-byte Technology Device [1458:1000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (500ns min, 1000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 23
Region 0: Memory at e7204000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at e7200000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: ohci1394
Kernel modules: ohci1394
-- System Information:
Debian Release: 5.0.3
APT prefers stable
APT policy: (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 2.6.26-1-686 (SMP w/4 CPU cores)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.26-1-686 depends on:
ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92o tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.26-1-686 recommends:
ii libc6-i686 2.7-18 GNU C Library: Shared libraries [i
Versions of packages linux-image-2.6.26-1-686 suggests:
ii grub 0.97-47lenny2 GRand Unified Bootloader (Legacy v
pn linux-doc-2.6.26 <none> (no description available)
-- debconf information:
linux-image-2.6.26-1-686/preinst/abort-overwrite-2.6.26-1-686:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.26-1-686/postinst/bootloader-error-2.6.26-1-686:
linux-image-2.6.26-1-686/postinst/depmod-error-initrd-2.6.26-1-686: false
linux-image-2.6.26-1-686/prerm/removing-running-kernel-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/old-system-map-link-2.6.26-1-686: true
linux-image-2.6.26-1-686/preinst/abort-install-2.6.26-1-686:
linux-image-2.6.26-1-686/preinst/lilo-has-ramdisk:
linux-image-2.6.26-1-686/preinst/bootloader-initrd-2.6.26-1-686: true
linux-image-2.6.26-1-686/prerm/would-invalidate-boot-loader-2.6.26-1-686: true
linux-image-2.6.26-1-686/preinst/elilo-initrd-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/kimage-is-a-directory:
linux-image-2.6.26-1-686/postinst/old-dir-initrd-link-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/create-kimage-link-2.6.26-1-686: true
linux-image-2.6.26-1-686/preinst/lilo-initrd-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/old-initrd-link-2.6.26-1-686: true
linux-image-2.6.26-1-686/preinst/overwriting-modules-2.6.26-1-686: true
linux-image-2.6.26-1-686/postinst/depmod-error-2.6.26-1-686: false
linux-image-2.6.26-1-686/postinst/bootloader-test-error-2.6.26-1-686:
linux-image-2.6.26-1-686/preinst/failed-to-move-modules-2.6.26-1-686:
linux-image-2.6.26-1-686/preinst/initrd-2.6.26-1-686:
Reply to: