Bug#536340: #536340 : confirmed on 2.6.30-8
Package: linux-image-2.6.30-2-amd64
Version: 2.6.30-8
Severity: normal
-- Package-specific info:
** Version:
Linux version 2.6.30-2-amd64 (Debian 2.6.30-8) (waldi@debian.org) (gcc
version 4.3.4 (Debian 4.3.4-3) ) #1 SMP Fri Sep 25 22:16:56 UTC 2009
** Command line:
root=UUID=63844dcd-cc99-4f3c-a44d-3648d95e1586 ro quiet vga=791
** Not tainted
** Kernel log:
[ 2.355893] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low)
-> IRQ 19
[ 2.355898] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3
]
[ 2.355936] ata_piix 0000:00:1f.2: setting latency timer to
64
[ 2.355981] scsi0 :
ata_piix
[ 2.356111] scsi1 :
ata_piix
[ 2.356241] ata1: SATA max UDMA/133 cmd 0x20c8 ctl 0x20ec bmdma
0x20a0 irq 19
[ 2.356244] ata2: SATA max UDMA/133 cmd 0x20c0 ctl 0x20e8 bmdma
0x20a8 irq 19
[ 2.520216] ata1.00: ATA-7: WDC WD2500JS-58NCB1, 10.02E02, max
UDMA/133
[ 2.520220] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth
0/32)
[ 2.528257] ata1.00: configured for
UDMA/133
[ 2.528363] scsi 0:0:0:0: Direct-Access ATA WDC WD2500JS-58N
10.0 PQ: 0 ANSI: 5
[ 2.701449] Driver 'sd' needs updating - please use bus_type
methods
[ 2.704268] ide-cd driver
5.00
[ 2.704483] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors:
(250 GB/232 GiB)
[ 2.704499] sd 0:0:0:0: [sda] Write Protect is
off
[ 2.704522] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00
00
[ 2.704547] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 2.704643] sda:ide-cd: hda: ATAPI 48X DVD-ROM DVD-R/RAM CD-R/RW
drive, 2048kB Cache
[ 2.706489] Uniform CD-ROM driver Revision:
3.20
[ 2.712764] sda1 sda2 <ide-cd: hdb: ATAPI 48X CD-ROM CD-R/RW
drive, 2048kB Cache
[ 2.742984] sda5>
sda3
[ 2.743180] sd 0:0:0:0: [sda] Attached SCSI
disk
[ 3.355249] device-mapper: uevent: version
1.0.3
[ 3.355467] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23)
initialised: dm-devel@redhat.com
[ 3.365025] PM: Starting manual resume from
disk
[ 3.421205] kjournald starting. Commit interval 5
seconds
[ 3.421214] EXT3-fs: mounted filesystem with ordered data
mode.
[ 4.509481] udev: starting version
146
[ 4.913931] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 4.913939] ACPI: Power Button
[PWRF]
[ 4.914010] input: Sleep Button as
/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
[ 4.914017] ACPI: Sleep Button
[SLPB]
[ 4.922975] processor ACPI_CPU:00: registered as
cooling_device0
[ 4.922980] ACPI: Processor [CPU0] (supports 8 throttling
states)
[ 4.923490] processor ACPI_CPU:01: registered as
cooling_device1
[ 4.923495] ACPI: Processor [CPU1] (supports 8 throttling
states)
[ 4.950435] parport_pc 00:08: reported by Plug and Play
ACPI
[ 4.950513] parport0: PC-style at 0x378 (0x778), irq 7
[PCSPP,TRISTATE]
[ 5.457873] input: PC Speaker as
/devices/platform/pcspkr/input/input5
[ 5.461763] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low)
-> IRQ 19
[ 5.609871] intel_rng: Firmware space is locked read-only. If you
can't or
[ 5.609873] intel_rng: don't want to disable this in firmware setup,
and if
[ 5.609875] intel_rng: you are certain that your system has a
functional
[ 5.609876] intel_rng: RNG, try using the 'no_fwh_detect'
option.
[ 5.925966] alloc irq_desc for 22 on cpu 0 node
0
[ 5.925970] alloc kstat_irqs on cpu 0 node
0
[ 5.925977] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low)
-> IRQ 22
[ 5.926010] HDA Intel 0000:00:1b.0: setting latency timer to
64
[ 6.004960] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:1b.0/input/input6
[ 6.204154] input: HDA Intel Line In at Ext Rear Jack as
/devices/pci0000:00/0000:00:1b.0/input/input7
[ 6.204229] input: HDA Intel Mic at Ext Front Jack as
/devices/pci0000:00/0000:00:1b.0/input/input8
[ 6.204306] input: HDA Intel Mic at Ext Rear Jack as
/devices/pci0000:00/0000:00:1b.0/input/input9
[ 6.204366] input: HDA Intel Line Out at Ext Rear Jack as
/devices/pci0000:00/0000:00:1b.0/input/input10
[ 6.204427] input: HDA Intel Line Out at Ext Rear Jack as
/devices/pci0000:00/0000:00:1b.0/input/input11
[ 6.204488] input: HDA Intel Line Out at Ext Rear Jack as
/devices/pci0000:00/0000:00:1b.0/input/input12
[ 6.204550] input: HDA Intel Line Out at Ext Rear Jack as
/devices/pci0000:00/0000:00:1b.0/input/input13
[ 6.204612] input: HDA Intel HP Out at Ext Front Jack as
/devices/pci0000:00/0000:00:1b.0/input/input14
[ 6.930187] Adding 497972k swap on /dev/sda5. Priority:-1 extents:1
across:497972k
[ 7.229648] EXT3 FS on sda1, internal
journal
[ 7.570387] coretemp coretemp.0: Using relative temperature
scale!
[ 7.570438] coretemp coretemp.1: Using relative temperature
scale!
[ 8.252784] kjournald starting. Commit interval 5
seconds
[ 8.253005] EXT3 FS on sda3, internal
journal
[ 8.253011] EXT3-fs: mounted filesystem with ordered data
mode.
[ 9.266090] fuse init (API version
7.11)
[ 9.286374] ADDRCONF(NETDEV_UP): eth0: link is not
ready
[ 11.045904] lp0: using parport0
(interrupt-driven).
[ 11.281405] ppdev: user-space parallel port
driver
[ 11.804137] e100: eth0 NIC Link is Up 100 Mbps Full
Duplex
[ 11.804388] ADDRCONF(NETDEV_CHANGE): eth0: link becomes
ready
[ 12.753509] Bluetooth: Core ver
2.15
[ 12.753836] NET: Registered protocol family
31
[ 12.753839] Bluetooth: HCI device and connection manager
initialized
[ 12.753842] Bluetooth: HCI socket layer
initialized
[ 12.775520] Bluetooth: L2CAP ver
2.13
[ 12.775523] Bluetooth: L2CAP socket layer
initialized
[ 13.050534] Bluetooth: RFCOMM socket layer
initialized
[ 13.050542] Bluetooth: RFCOMM TTY layer
initialized
[ 13.050545] Bluetooth: RFCOMM ver
1.11
[ 13.071835] Bluetooth: BNEP (Ethernet Emulation) ver
1.3
[ 13.071838] Bluetooth: BNEP filters: protocol
multicast
[ 13.226712] Bridge firewalling
registered
[ 13.309130] Bluetooth: SCO (Voice Link) ver
0.6
[ 13.309133] Bluetooth: SCO socket layer
initialized
[ 14.820099] [drm] Initialized drm 1.1.0
20060810
[ 14.873844] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ
16
[ 14.873850] pci 0000:00:02.0: setting latency timer to
64
[ 14.887728] alloc irq_desc for 27 on cpu 0 node
0
[ 14.887732] alloc kstat_irqs on cpu 0 node
0
[ 14.887745] pci 0000:00:02.0: irq 27 for
MSI/MSI-X
[ 14.887944] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on
minor 0
[ 21.912509] eth0: no IPv6 routers
present
[ 42.251093] CPU0 attaching NULL
sched-domain.
[ 42.251099] CPU1 attaching NULL
sched-domain.
[ 42.260108] CPU0 attaching
sched-domain:
[ 42.260111] domain 0: span 0-1 level
MC
[ 42.260114] groups: 0
1
[ 42.260120] CPU1 attaching
sched-domain:
[ 42.260123] domain 0: span 0-1 level
MC
[ 42.260125] groups: 1
0
** Loaded modules:
Module Size Used by
i915 168504 1
drm 172672 2 i915
i2c_algo_bit 5988 1 i915
video 21884 1 i915
output 3472 1 video
sco 10980 2
bridge 48240 0
stp 2868 1 bridge
bnep 13792 2
rfcomm 35984 0
l2cap 21104 6 bnep,rfcomm
bluetooth 55108 6 sco,bnep,rfcomm,l2cap
ppdev 7784 0
lp 10612 0
acpi_cpufreq 8912 0
cpufreq_conservative 7928 0
cpufreq_powersave 1792 0
cpufreq_stats 4660 0
cpufreq_userspace 3652 0
fuse 54768 1
coretemp 6656 0
dm_crypt 12984 0
snd_hda_codec_idt 62480 1
snd_hda_intel 26680 1
snd_hda_codec 75248 2 snd_hda_codec_idt,snd_hda_intel
snd_hwdep 8152 1 snd_hda_codec
snd_pcm 78472 2 snd_hda_intel,snd_hda_codec
snd_seq 51376 0
snd_timer 21824 2 snd_pcm,snd_seq
rng_core 4872 0
pcspkr 2800 0
i2c_i801 10464 0
psmouse 42172 0
i2c_core 25456 4 i915,drm,i2c_algo_bit,i2c_i801
snd_seq_device 7476 1 snd_seq
snd 63912 10
snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq,snd_timer,snd_seq_device
soundcore 7984 1
snd
parport_pc 27080
1
snd_page_alloc 9984 2
snd_hda_intel,snd_pcm
serio_raw 5844
0
processor 40208 1
acpi_cpufreq
parport 38224 3
ppdev,lp,parport_pc
evdev 10448
14
button 6512
0
ext3 122848
2
jbd 48152 1
ext3
mbcache 8804 1
ext3
dm_mod 59384 1
dm_crypt
ide_cd_mod 29048
0
sd_mod 33736
4
cdrom 34344 1
ide_cd_mod
crc_t10dif 2096 1
sd_mod
ide_pci_generic 4964
0
ata_generic 5924
0
usbhid 37328
0
hid 41376 1
usbhid
ata_piix 25124
4
e100 32504
0
mii 5600 1
e100
piix 7256
0
libata 175660 2
ata_generic,ata_piix
uhci_hcd 22208
0
scsi_mod 158768 2
sd_mod,libata
ehci_hcd 33996
0
ide_core 104976 3
ide_cd_mod,ide_pci_generic,piix
intel_agp 28976
1
thermal 15936
0
fan 5240
0
thermal_sys 16448 4
video,processor,thermal,fan
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82946GZ/PL/GL Memory
Controller Hub [8086:2970] (rev 02)
Subsystem: Intel Corporation Device
[8086:5354]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast>TAbort-
SERR-
Kernel driver in use:
agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation 82946GZ/GL
Integrated Graphics Controller [8086:2972] (rev 02) (prog-if 00 [VGA
controller])
Subsystem: Intel Corporation Device
[8086:5354]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast>TAbort-
SERR-
[disabled]
Capabilities:
00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High
Definition Audio Controller [8086:27d8] (rev 01)
Subsystem: Intel Corporation Device
[8086:a201]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast>TAbort-
SERR-
Kernel driver in use: HDA
Intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI
Express Port 1 [8086:27d0] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast>TAbort-
SERR- TAbort-
Reset-
FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat-
DiscTmrSERREn-
Capabilities:
Kernel driver in use:
pcieport-driver
00:1c.2 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI
Express Port 3 [8086:27d4] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast>TAbort-
SERR- TAbort-
Reset-
FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat-
DiscTmrSERREn-
Capabilities:
Kernel driver in use:
pcieport-driver
00:1c.3 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI
Express Port 4 [8086:27d6] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast>TAbort-
SERR- TAbort-
Reset-
FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat-
DiscTmrSERREn-
Capabilities:
Kernel driver in use:
pcieport-driver
00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family)
USB UHCI Controller #1 [8086:27c8] (rev 01) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device
[8086:5354]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium>TAbort-
SERR- TAbort-
SERR- TAbort-
SERR- TAbort-
SERR- TAbort-
SERR-
Kernel driver in use:
ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge
[8086:244e] (rev e1) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast>TAbort-
SERR- TAbort-
Reset-
FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat-
DiscTmrSERREn-
Capabilities:
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GB/GR (ICH7 Family)
LPC Interface Bridge [8086:27b8] (rev 01)
Subsystem: Intel Corporation Device
[8086:5354]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium>TAbort-
SERR-
00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE
Controller [8086:27df] (rev 01) (prog-if 8a [Master SecP PriP])
Subsystem: Intel Corporation Device
[8086:5354]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium>TAbort-
SERR- TAbort-
SERR-
Kernel driver in use:
ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801G (ICH7 Family) SMBus
Controller [8086:27da] (rev 01)
Subsystem: Intel Corporation Device
[8086:5354]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium>TAbort-
SERR- TAbort-
SERR-
Kernel driver in use:
e100
-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.30-2-amd64 (SMP w/2 CPU cores)
Locale: LANG=it_IT.UTF-8, LC_CTYPE=it_IT.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.30-2-amd64 depends on:
ii debconf [debconf-2.0] 1.5.27 Debian configuration
management sy
ii initramfs-tools [linux-initra 0.93.4 tools for generating an
initramfs
ii module-init-tools 3.10-3 tools for managing Linux
kernel mo
linux-image-2.6.30-2-amd64 recommends no packages.
Versions of packages linux-image-2.6.30-2-amd64 suggests:
ii grub-gfxboot [grub] 0.97-46 GRand Unified Bootloader
pn linux-doc-2.6.30 (no description available)
-- debconf information:
linux-image-2.6.30-2-amd64/preinst/bootloader-initrd-2.6.30-2-amd64: true
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.30-2-amd64/preinst/initrd-2.6.30-2-amd64:
linux-image-2.6.30-2-amd64/preinst/failed-to-move-modules-2.6.30-2-amd64:
linux-image-2.6.30-2-amd64/preinst/lilo-has-ramdisk:
linux-image-2.6.30-2-amd64/postinst/kimage-is-a-directory:
linux-image-2.6.30-2-amd64/prerm/would-invalidate-boot-loader-2.6.30-2-amd64:
true
linux-image-2.6.30-2-amd64/postinst/old-initrd-link-2.6.30-2-amd64: true
linux-image-2.6.30-2-amd64/preinst/abort-install-2.6.30-2-amd64:
linux-image-2.6.30-2-amd64/postinst/bootloader-error-2.6.30-2-amd64:
linux-image-2.6.30-2-amd64/prerm/removing-running-kernel-2.6.30-2-amd64:
true
linux-image-2.6.30-2-amd64/postinst/depmod-error-2.6.30-2-amd64: false
linux-image-2.6.30-2-amd64/postinst/depmod-error-initrd-2.6.30-2-amd64:
false
linux-image-2.6.30-2-amd64/preinst/overwriting-modules-2.6.30-2-amd64:
true
linux-image-2.6.30-2-amd64/preinst/lilo-initrd-2.6.30-2-amd64: true
linux-image-2.6.30-2-amd64/postinst/old-dir-initrd-link-2.6.30-2-amd64: true
linux-image-2.6.30-2-amd64/preinst/abort-overwrite-2.6.30-2-amd64:
linux-image-2.6.30-2-amd64/postinst/create-kimage-link-2.6.30-2-amd64:
true
linux-image-2.6.30-2-amd64/postinst/bootloader-test-error-2.6.30-2-amd64:
linux-image-2.6.30-2-amd64/postinst/old-system-map-link-2.6.30-2-amd64: true
linux-image-2.6.30-2-amd64/preinst/elilo-initrd-2.6.30-2-amd64: true
_________________________________________________________________
Le tue Emoticon ti sembrano poche? Scaricane di nuove!
http://intrattenimento.it.msn.com/emoticon/
Reply to: