[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#530551: marked as done (Wired network connection shuts down every 4-5min, then automaticaly restarts)



Your message dated Tue, 13 Oct 2009 11:34:03 +0000
with message-id <E1Mxfdj-0001XA-Jb@ries.debian.org>
and subject line Bug#530551: fixed in unicode-data 5.2.0-1
has caused the Debian Bug report #530551,
regarding Wired network connection shuts down every 4-5min, then automaticaly restarts
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
530551: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=530551
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message ---
Package: base
Version: 5.0
Every 4-5 minutes the wired network connection shuts down. After a couple of seconds it back on again. Log text:

May 25 19:22:23 Slejpner kernel: [ 3266.373370] ACPI: PCI Interrupt 0000:10:00.0[A] -> GSI 17 (level, low) -> IRQ 17
May 25 19:22:23 Slejpner kernel: [ 3266.373370] iwl3945: Radio disabled by HW RF Kill switch
May 25 19:22:23 Slejpner kernel: [ 3266.373370] ACPI: PCI interrupt for device 0000:10:00.0 disabled
May 25 19:22:23 Slejpner pppd[4761]: Modem hangup
May 25 19:22:23 Slejpner kernel: [ 3266.378069] eth0: late interrupt.
May 25 19:22:23 Slejpner kernel: [ 3266.380211] b44: eth0: powering down PHY
May 25 19:22:23 Slejpner pppd[4761]: Connect time 4.6 minutes.
May 25 19:22:23 Slejpner pppd[4761]: Sent 273611 bytes, received 1097617 bytes.
May 25 19:22:23 Slejpner pppd[4761]: Connection terminated.
May 25 19:22:23 Slejpner kernel: [ 3266.547179] ACPI: PCI Interrupt 0000:10:00.0[A] -> GSI 17 (level, low) -> IRQ 17
May 25 19:22:23 Slejpner kernel: [ 3266.547179] iwl3945: Radio disabled by HW RF Kill switch
May 25 19:22:23 Slejpner kernel: [ 3266.547179] ACPI: PCI interrupt for device 0000:10:00.0 disabled
May 25 19:22:23 Slejpner kernel: [ 3266.553069] ADDRCONF(NETDEV_UP): eth0: link is not ready
May 25 19:22:23 Slejpner kernel: [ 3266.662871] b44: eth0: powering down PHY
May 25 19:22:24 Slejpner kernel: [ 3267.870455] ADDRCONF(NETDEV_UP): eth0: link is not ready
May 25 19:22:28 Slejpner kernel: [ 3271.219899] b44: eth0: Link is up at 100 Mbps, full duplex.
May 25 19:22:28 Slejpner kernel: [ 3271.219909] b44: eth0: Flow control is off for TX and off for RX.
May 25 19:22:28 Slejpner kernel: [ 3271.220250] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
May 25 19:22:53 Slejpner pppd[4761]: PPP session is 3757
May 25 19:22:53 Slejpner pppd[4761]: Using interface ppp0
May 25 19:22:53 Slejpner pppd[4761]: Connect: ppp0 <--> eth0
May 25 19:22:53 Slejpner pppd[4761]: CHAP authentication succeeded
May 25 19:22:53 Slejpner pppd[4761]: CHAP authentication succeeded
May 25 19:22:53 Slejpner pppd[4761]: peer from calling number 00:90:1A:A0:F4:5A authorized
May 25 19:22:54 Slejpner pppd[4761]: local  IP address 78.54.111.171
May 25 19:22:54 Slejpner pppd[4761]: remote IP address 213.191.76.38
May 25 19:22:54 Slejpner pppd[4761]: primary   DNS address 213.191.74.19
May 25 19:22:54 Slejpner pppd[4761]: secondary DNS address 62.109.123.197

Other stuff that might help:

arne@Slejpner:~$ uname -a
Linux Slejpner 2.6.26-1-686 #1 SMP Sat Jan 10 18:29:31 UTC 2009 i686 GNU/Linux
arne@Slejpner:~$ 
arne@Slejpner:~$ ls -l /lib/libc.so.6
lrwxrwxrwx 1 root root 11 16. Mai 00:36 /lib/libc.so.6 -> libc-2.7.so
arne@Slejpner:~$ 
arne@Slejpner:~$ dpkg -s libc6 | grep ^Version
Version: 2.7-18
arne@Slejpner:~$ reportbug -q --template -T none -s none -S normal -b --list-cc none -q base
Detected character set: UTF-8
Please change your locale if this is incorrect.

Using 'Arne <MyDebian.bugs@web.de>' as your from address.
Getting status for base...
Will send report to Debian (per lsb_release).

Content-Type: text/plain; charset="us-ascii"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
From: Arne <MyDebian.bugs@web.de>
To: Debian Bug Tracking System <submit@bugs.debian.org>
Subject: none
X-Debbugs-Cc: MyDebian.bugs@web.de, none

Package: base
Severity: normal



-- System Information:
Debian Release: 5.0
  APT prefers proposed-updates
  APT policy: (99, 'proposed-updates'), (99, 'stable')
Architecture: i386 (i686)

Kernel: Linux 2.6.26-1-686 (SMP w/2 CPU cores)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash


The system is running on a hp nx7400 laptop with 1 GB ram and 250 GB Samsung Harddisk.
No problems what soever while using Etch.

Good Luck & thank you very much !


__________________________________________________________________________
Verschicken Sie SMS direkt vom Postfach aus - in alle deutschen und viele 
ausländische Netze zum gleichen Preis! 
https://produkte.web.de/webde_sms/sms






--- End Message ---
--- Begin Message ---
Source: unicode-data
Source-Version: 5.2.0-1

We believe that the bug you reported is fixed in the latest version of
unicode-data, which is due to be installed in the Debian FTP archive:

unicode-data_5.2.0-1.diff.gz
  to pool/main/u/unicode-data/unicode-data_5.2.0-1.diff.gz
unicode-data_5.2.0-1.dsc
  to pool/main/u/unicode-data/unicode-data_5.2.0-1.dsc
unicode-data_5.2.0-1_all.deb
  to pool/main/u/unicode-data/unicode-data_5.2.0-1_all.deb
unicode-data_5.2.0.orig.tar.gz
  to pool/main/u/unicode-data/unicode-data_5.2.0.orig.tar.gz



A summary of the changes between this version and the previous one is
attached.

Thank you for reporting the bug, which will now be closed.  If you
have further comments please address them to 530551@bugs.debian.org,
and the maintainer will reopen the bug report if appropriate.

Debian distribution maintenance software
pp.
Alastair McKinstry <mckinstry@debian.org> (supplier of updated unicode-data package)

(This message was generated automatically at their request; if you
believe that there is a problem with it please contact the archive
administrators by mailing ftpmaster@debian.org)


-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Format: 1.8
Date: Mon, 12 Oct 2009 16:39:00 +0100
Source: unicode-data
Binary: unicode-data
Architecture: source all
Version: 5.2.0-1
Distribution: unstable
Urgency: low
Maintainer: Alastair McKinstry <mckinstry@debian.org>
Changed-By: Alastair McKinstry <mckinstry@debian.org>
Description: 
 unicode-data - Property data for the Unicode character set
Closes: 530551
Changes: 
 unicode-data (5.2.0-1) unstable; urgency=low
 .
   * New upstream release. Closes: #530551.
   * Move to Standards-Version: 3.8.3., debhelper 7.
Checksums-Sha1: 
 345da6fb0d29eaf03f0864b2240423d364b27d57 1052 unicode-data_5.2.0-1.dsc
 5f851df09af011a89866f8db83d98b91a78a1554 8162738 unicode-data_5.2.0.orig.tar.gz
 2b1f3e8eb98fc0a832be1055438eb96d5b24b48a 2866 unicode-data_5.2.0-1.diff.gz
 523a650c088a7a6d4303201225bda69a0035abb6 6972318 unicode-data_5.2.0-1_all.deb
Checksums-Sha256: 
 b869dcb700791f5fb0ec133370695d3543e11be8f02c21237526952a4276929b 1052 unicode-data_5.2.0-1.dsc
 36c8d4facbef145b4c2b1d155d8cf7f842e219d2d736fb363223247a69efdceb 8162738 unicode-data_5.2.0.orig.tar.gz
 993c79a293d658b24e6aaf65351e1e790e7cef596d6e10c1202b15e4a8dfeb40 2866 unicode-data_5.2.0-1.diff.gz
 5031f05dd8734c84417d2ad1495e582b5188daefeed1bee12a14231c74546724 6972318 unicode-data_5.2.0-1_all.deb
Files: 
 f00503c1f714bf674989bdf2f9b4de20 1052 misc optional unicode-data_5.2.0-1.dsc
 12582943be38523bbceb7187b09e67d7 8162738 misc optional unicode-data_5.2.0.orig.tar.gz
 f12bfa0d867042c5fcece0e63309c0aa 2866 misc optional unicode-data_5.2.0-1.diff.gz
 2850507b7428915cdccc7f0b6bf2bcd0 6972318 misc optional unicode-data_5.2.0-1_all.deb

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.9 (GNU/Linux)

iD8DBQFK1GztQTK/kCo4XFcRAvwxAKCt6e3x8RZEUmxHbyzSLwPRx4kJKgCg2rwl
LOUDFGjgJccvHIne9VR75Y8=
=bC49
-----END PGP SIGNATURE-----



--- End Message ---

Reply to: