Bug#550665: linux-image-2.6.30-2-amd64: ALSA: When i use a kernel most newer than 2.6.26 alsamixer section "Capture" is empty with the exception of the presence of the "Digital" channel
Package: linux-image-2.6.30-2-amd64
Version: 2.6.30-8
Severity: important
I had a notebook (Asus F3JA-AP061H) with that sound card:
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)
All works but as I say in the subject the section Capture in alsamixer is empty with the exception of Digital channel.
This only happens with kernel most newer than 2.6.26 (I test with 2.6.30, 2.6.31 and 2.6.29) on that kernel (2.6.26 i mean) the section Capture is fully populated by channels. I tryed also Ubuntu Karmic Koala and here I had the same trouble (it use 2.6.31 kernel).
With that issue i can't record using a microphone, if I want do that i must reboot and use the 2.6.26 kernel.
alsactl restore
Unknown hardware: "HDA-Intel" "Realtek ALC660" "HDA:10ec0861,10430000,00100340 HDA:15433155,10431335,00100700" "0x1043" "0x1338"
Hardware is initialized using a guess method
alsactl: set_control:1256: failed to obtain info for control #1 (No such file or directory)
alsactl: set_control:1256: failed to obtain info for control #2 (No such file or directory)
alsactl: set_control:1256: failed to obtain info for control #3 (No such file or directory)
alsactl: set_control:1256: failed to obtain info for control #4 (No such file or directory)
alsactl: set_control:1256: failed to obtain info for control #5 (No such file or directory)
alsactl: set_control:1256: failed to obtain info for control #8 (No such file or directory)
alsactl: set_control:1256: failed to obtain info for control #9 (No such file or directory)
alsactl: set_control:1256: failed to obtain info for control #12 (No such file or directory)
alsactl: set_control:1256: failed to obtain info for control #13 (No such file or directory)
head -n 1 /proc/asound/card0/codec*
==> /proc/asound/card0/codec#0 <==
Codec: Realtek ALC660
==> /proc/asound/card0/codec#1 <==
Codec: Generic 1543 Si3054
aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC861 Analog [ALC861 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 1: ALC861 Digital [ALC861 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 6: Si3054 Modem [Si3054 Modem]
Subdevices: 1/1
Subdevice #0: subdevice #0
I tried to add that line (with no result) on /etc/modprobe.d/alsa-base.conf
options snd-hda-intel model=asus-laptop
-- Package-specific info:
** Version:
Linux version 2.6.30-2-amd64 (Debian 2.6.30-8) (waldi@debian.org) (gcc version 4.3.4 (Debian 4.3.4-3) ) #1 SMP Fri Sep 25 22:16:56 UTC 2009
** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.30-2-amd64 root=UUID=7b199f37-aba3-49d7-b05d-b4c5bd5d79aa ro
** Not tainted
** Kernel log:
[ 5.080060] usb 4-1: new full speed USB device using uhci_hcd and address 2
[ 5.224895] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 5.225051] sr 1:0:1:0: Attached scsi generic sg1 type 5
[ 5.229090] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 5.229299] firewire_ohci 0000:06:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.316038] firewire_ohci: Added fw-ohci device 0000:06:01.0, OHCI version 1.0
[ 5.337030] usb 4-1: New USB device found, idVendor=0b05, idProduct=1712
[ 5.337146] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=3
[ 5.337258] usb 4-1: SerialNumber: 0194E8-5B-0002
[ 5.337455] usb 4-1: configuration #1 chosen from 1 choice
[ 5.342154] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks
[ 5.342285] iwl3945: Copyright(c) 2003-2009 Intel Corporation
[ 5.342648] iwl3945 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 5.342851] iwl3945 0000:03:00.0: setting latency timer to 64
[ 5.393635] usbcore: registered new interface driver hiddev
[ 5.396474] iwl3945 0000:03:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
[ 5.396594] iwl3945 0000:03:00.0: Detected Intel Wireless WiFi Link 3945ABG
[ 5.396847] alloc irq_desc for 29 on cpu 0 node 0
[ 5.396850] alloc kstat_irqs on cpu 0 node 0
[ 5.396885] iwl3945 0000:03:00.0: irq 29 for MSI/MSI-X
[ 5.407608] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input10
[ 5.407839] generic-usb 0003:046D:C043.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.1-2/input0
[ 5.407984] usbcore: registered new interface driver usbhid
[ 5.408055] Linux video capture interface: v2.00
[ 5.408238] usbhid: v2.6:USB HID core driver
[ 5.410487] stkwebcam: Syntek USB2.0 Camera is now controlling video device /dev/video0
[ 5.410636] usbcore: registered new interface driver stkwebcam
[ 5.479013] sdhci: Secure Digital Host Controller Interface driver
[ 5.482084] sdhci: Copyright(c) Pierre Ossman
[ 5.816199] firewire_core: created device fw0: GUID 00e01800036bd4cf, S400
[ 5.944134] Bluetooth: Core ver 2.15
[ 5.948633] NET: Registered protocol family 31
[ 5.948749] Bluetooth: HCI device and connection manager initialized
[ 5.948863] Bluetooth: HCI socket layer initialized
[ 5.949028] sdhci-pci 0000:06:01.1: SDHCI controller found [1180:0822] (rev 19)
[ 5.949166] sdhci-pci 0000:06:01.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 5.951376] Registered led device: mmc0::
[ 5.952545] mmc0: SDHCI controller on PCI [0000:06:01.1] using PIO
[ 6.008514] phy0: Selected rate control algorithm 'iwl-3945-rs'
[ 6.023064] Bluetooth: Generic Bluetooth USB driver ver 0.5
[ 6.023285] usbcore: registered new interface driver btusb
[ 6.176895] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 6.177055] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 6.270149] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input11
[ 7.385472] Adding 1172736k swap on /dev/sda3. Priority:-1 extents:1 across:1172736k
[ 7.557131] EXT3 FS on sda2, internal journal
[ 7.674746] loop: module loaded
[ 13.907057] kjournald starting. Commit interval 5 seconds
[ 13.907202] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
[ 13.907633] EXT3 FS on sda5, internal journal
[ 13.907851] EXT3-fs: mounted filesystem with ordered data mode.
[ 14.435354] iwl3945 0000:03:00.0: firmware: requesting iwlwifi-3945-2.ucode
[ 14.475698] iwl3945 0000:03:00.0: loaded firmware version 15.32.2.9
[ 14.521931] Registered led device: iwl-phy0::radio
[ 14.522134] Registered led device: iwl-phy0::assoc
[ 14.522282] Registered led device: iwl-phy0::RX
[ 14.522428] Registered led device: iwl-phy0::TX
[ 14.532906] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 14.808434] PPP generic driver version 2.4.2
[ 18.356666] Bluetooth: L2CAP ver 2.13
[ 18.356796] Bluetooth: L2CAP socket layer initialized
[ 18.430426] Bluetooth: RFCOMM socket layer initialized
[ 18.430564] Bluetooth: RFCOMM TTY layer initialized
[ 18.430681] Bluetooth: RFCOMM ver 1.11
[ 18.434339] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 18.434459] Bluetooth: BNEP filters: protocol multicast
[ 18.489010] Bridge firewalling registered
[ 18.504216] Bluetooth: SCO (Voice Link) ver 0.6
[ 18.504344] Bluetooth: SCO socket layer initialized
[ 35.327009] r8169: eth0: link down
[ 35.327522] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 35.686396] Registered led device: iwl-phy0::radio
[ 35.686598] Registered led device: iwl-phy0::assoc
[ 35.686743] Registered led device: iwl-phy0::RX
[ 35.686885] Registered led device: iwl-phy0::TX
[ 35.694022] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 36.707030] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 36.793273] [drm] Initialized drm 1.1.0 20060810
[ 36.801799] pci 0000:01:00.0: setting latency timer to 64
[ 36.802074] [drm] Initialized radeon 1.30.0 20080528 for 0000:01:00.0 on minor 0
[ 37.402605] [drm] Setting GART location based on new memory map
[ 37.403471] [drm] Loading R500 Microcode
[ 37.403478] platform radeon_cp.0: firmware: requesting radeon/R520_cp.bin
[ 37.430535] [drm] Num pipes: 1
[ 37.430555] [drm] writeback test succeeded in 2 usecs
[ 39.044599] wlan0: authenticate with AP 00:18:4d:c0:38:32
[ 39.046402] wlan0: authenticated
[ 39.046407] wlan0: associate with AP 00:18:4d:c0:38:32
[ 39.049777] wlan0: RX AssocResp from 00:18:4d:c0:38:32 (capab=0x411 status=0 aid=1)
[ 39.049783] wlan0: associated
[ 39.053450] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 43.053431] wlan0: deauthenticated (Reason: 1)
[ 44.052052] wlan0: direct probe to AP 00:18:4d:c0:38:32 try 1
[ 44.054312] wlan0 direct probe responded
[ 44.054316] wlan0: authenticate with AP 00:18:4d:c0:38:32
[ 44.055877] wlan0: authenticated
[ 44.055881] wlan0: associate with AP 00:18:4d:c0:38:32
[ 44.058827] wlan0: RX ReassocResp from 00:18:4d:c0:38:32 (capab=0x411 status=0 aid=1)
[ 44.058832] wlan0: associated
[ 49.984014] wlan0: no IPv6 routers present
** Loaded modules:
Module Size Used by
radeon 141984 2
drm 172672 3 radeon
sco 10980 2
bridge 48240 0
stp 2868 1 bridge
bnep 13792 2
rfcomm 35984 8
l2cap 21104 16 bnep,rfcomm
ppp_generic 25704 0
slhc 5728 1 ppp_generic
acpi_cpufreq 8912 0
firewire_sbp2 15440 0
loop 15980 0
snd_hda_codec_si3054 5232 1
snd_hda_codec_realtek 250372 1
snd_hda_intel 26680 2
snd_hda_codec 75248 3 snd_hda_codec_si3054,snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 8152 1 snd_hda_codec
snd_pcm_oss 37200 0
snd_mixer_oss 15072 2 snd_pcm_oss
snd_pcm 78472 4 snd_hda_codec_si3054,snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_seq_midi 6976 0
snd_rawmidi 23008 1 snd_seq_midi
snd_seq_midi_event 7712 1 snd_seq_midi
btusb 12756 0
snd_seq 51376 2 snd_seq_midi,snd_seq_midi_event
arc4 2048 2
ecb 3072 2
sdhci_pci 8160 0
snd_timer 21824 2 snd_pcm,snd_seq
bluetooth 55108 7 sco,bnep,rfcomm,l2cap,btusb
snd_seq_device 7476 3 snd_seq_midi,snd_rawmidi,snd_seq
sdhci 17604 1 sdhci_pci
snd 63912 14 snd_hda_codec_si3054,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
stkwebcam 21300 0
videodev 36768 1 stkwebcam
v4l1_compat 12932 1 videodev
usbhid 37328 0
hid 41376 1 usbhid
iwl3945 70340 0
iwlcore 106896 1 iwl3945
v4l2_compat_ioctl32 9312 1 videodev
i2c_i801 10464 0
firewire_ohci 22356 0
sg 24040 0
rfkill 12116 2 iwlcore
mmc_core 55472 1 sdhci
ricoh_mmc 4272 0
joydev 11072 0
soundcore 7984 2 snd
firewire_core 44980 2 firewire_sbp2,firewire_ohci
i2c_core 25456 2 drm,i2c_i801
sr_mod 15908 0
r8169 32548 0
video 21884 0
mac80211 161424 2 iwl3945,iwlcore
asus_laptop 18964 0
snd_page_alloc 9984 2 snd_hda_intel,snd_pcm
crc_itu_t 2720 1 firewire_core
mii 5600 1 r8169
led_class 5048 4 sdhci,iwl3945,iwlcore,asus_laptop
uhci_hcd 22208 0
ehci_hcd 33996 0
cdrom 34344 1 sr_mod
evdev 10448 22
rng_core 4872 0
output 3472 1 video
intel_agp 28976 0
processor 40208 3 acpi_cpufreq
battery 7840 0
cfg80211 65464 3 iwl3945,iwlcore,mac80211
serio_raw 5844 0
button 6512 0
pcspkr 2800 0
ac 3872 0
psmouse 42172 0
ext3 122848 2
jbd 48152 1 ext3
mbcache 8804 1 ext3
sd_mod 33736 4
crc_t10dif 2096 1 sd_mod
thermal 15936 0
fan 5240 0
thermal_sys 16448 4 video,processor,thermal,fan
ide_pci_generic 4964 0
ide_core 104976 1 ide_pci_generic
ata_generic 5924 0
ata_piix 25124 3
libata 175660 2 ata_generic,ata_piix
scsi_mod 158768 5 firewire_sbp2,sg,sr_mod,sd_mod,libata
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub [8086:27a0] (rev 03)
Subsystem: ASUSTeK Computer Inc. Device [1043:1317]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express PCI Express Root Port [8086:27a1] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00009000-0000bfff
Memory behind bridge: fdf00000-fdffffff
Prefetchable memory behind bridge: 00000000bdf00000-00000000ddefffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller [8086:27d8] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:1338]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at febfc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 [8086:27d0] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fe000000-fe0fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
00:1c.1 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 [8086:27d2] (rev 02) (prog-if 00 [Normal decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Memory behind bridge: fe100000-fe1fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
00:1c.2 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 [8086:27d4] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=04, subordinate=05, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fe200000-fe9fffff
Prefetchable memory behind bridge: 00000000ddf00000-00000000dfefffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 [8086:27c8] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:1317]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at ec00 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 [8086:27c9] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:1317]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at e880 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 [8086:27ca] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:1317]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at e800 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 [8086:27cb] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:1317]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 16
Region 4: I/O ports at e480 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller [8086:27cc] (rev 02) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:1317]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at febfbc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2) (prog-if 01 [Subtractive decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=06, subordinate=06, sec-latency=32
Memory behind bridge: fea00000-feafffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:1317]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 IDE interface [0101]: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller [8086:27c4] (rev 02) (prog-if 80 [Master])
Subsystem: ASUSTeK Computer Inc. Device [1043:1317]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at ffa0 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801G (ICH7 Family) SMBus Controller [8086:27da] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:1317]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 0400 [size=32]
Kernel driver in use: i801_smbus
01:00.0 VGA compatible controller [0300]: ATI Technologies Inc M56P [Radeon Mobility X1600] [1002:71c5] (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. A6J-Q008 [1043:10b2]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at c0000000 (32-bit, prefetchable) [size=256M]
Region 1: I/O ports at b000 [size=256]
Region 2: Memory at fdff0000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at fdfc0000 [disabled] [size=128K]
Capabilities: <access denied>
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 01)
Subsystem: ASUSTeK Computer Inc. A6J-Q008 [1043:11f5]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 28
Region 0: I/O ports at c800 [size=256]
Region 2: Memory at fe0ff000 (64-bit, non-prefetchable) [size=4K]
Expansion ROM at fe0e0000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: r8169
03:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection [8086:4222] (rev 02)
Subsystem: Intel Corporation PRO/Wireless 3945ABG Network Connection [8086:1001]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 29
Region 0: Memory at fe1ff000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: iwl3945
06:01.0 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 Controller [1180:0832] (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:1317]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (500ns min, 1000ns max)
Interrupt: pin A routed to IRQ 16
Region 0: Memory at feaff800 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
06:01.1 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 19)
Subsystem: ASUSTeK Computer Inc. Device [1043:1317]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin B routed to IRQ 17
Region 0: Memory at feaff400 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
06:01.2 System peripheral [0880]: Ricoh Co Ltd R5C843 MMC Host Controller [1180:0843] (rev 01)
Subsystem: ASUSTeK Computer Inc. Device [1043:1317]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 5
Region 0: Memory at feaff000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ricoh-mmc
06:01.3 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter [1180:0592] (rev 0a)
Subsystem: ASUSTeK Computer Inc. Device [1043:1317]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 5
Region 0: Memory at feafec00 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.30-2-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.30-2-amd64 depends on:
ii debconf [debconf-2.0] 1.5.27 Debian configuration management sy
ii initramfs-tools [linux-initra 0.93.4 tools for generating an initramfs
ii module-init-tools 3.10-3 tools for managing Linux kernel mo
linux-image-2.6.30-2-amd64 recommends no packages.
Versions of packages linux-image-2.6.30-2-amd64 suggests:
ii grub 0.97-59 GRand Unified Bootloader (dummy pa
pn linux-doc-2.6.30 <none> (no description available)
-- debconf information:
linux-image-2.6.30-2-amd64/preinst/bootloader-initrd-2.6.30-2-amd64: true
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.30-2-amd64/preinst/initrd-2.6.30-2-amd64:
linux-image-2.6.30-2-amd64/preinst/failed-to-move-modules-2.6.30-2-amd64:
linux-image-2.6.30-2-amd64/preinst/lilo-has-ramdisk:
linux-image-2.6.30-2-amd64/postinst/kimage-is-a-directory:
linux-image-2.6.30-2-amd64/prerm/would-invalidate-boot-loader-2.6.30-2-amd64: true
linux-image-2.6.30-2-amd64/postinst/old-initrd-link-2.6.30-2-amd64: true
linux-image-2.6.30-2-amd64/preinst/abort-install-2.6.30-2-amd64:
linux-image-2.6.30-2-amd64/postinst/bootloader-error-2.6.30-2-amd64:
linux-image-2.6.30-2-amd64/prerm/removing-running-kernel-2.6.30-2-amd64: true
linux-image-2.6.30-2-amd64/postinst/depmod-error-2.6.30-2-amd64: false
linux-image-2.6.30-2-amd64/postinst/depmod-error-initrd-2.6.30-2-amd64: false
linux-image-2.6.30-2-amd64/preinst/overwriting-modules-2.6.30-2-amd64: true
linux-image-2.6.30-2-amd64/preinst/lilo-initrd-2.6.30-2-amd64: true
linux-image-2.6.30-2-amd64/postinst/old-dir-initrd-link-2.6.30-2-amd64: true
linux-image-2.6.30-2-amd64/preinst/abort-overwrite-2.6.30-2-amd64:
linux-image-2.6.30-2-amd64/postinst/create-kimage-link-2.6.30-2-amd64: true
linux-image-2.6.30-2-amd64/postinst/bootloader-test-error-2.6.30-2-amd64:
linux-image-2.6.30-2-amd64/postinst/old-system-map-link-2.6.30-2-amd64: true
linux-image-2.6.30-2-amd64/preinst/elilo-initrd-2.6.30-2-amd64: true
Reply to: