Bug#550576: linux-image-2.6.30-2-amd64: Powernow Failes to load: [Firmware Bug]: powernow-k8: No PSB or ACPI _PSS objects
Package: linux-image-2.6.30-2-amd64
Version: 2.6.30-8
Severity: normal
The AMD Powernow kernel drivers fail to load which prevents CPU frequency scaling from working anymore. It use
to work fine on Lenny and in Squeeze on earlier kernels. The problem affects both 2.6.30 -1 and -2.
-- Package-specific info:
** Version:
Linux version 2.6.30-2-amd64 (Debian 2.6.30-8) (waldi@debian.org) (gcc version 4.3.4 (Debian 4.3.4-3) ) #1 SMP Fri Sep 25 22:16:56 UTC 2009
** Command line:
BOOT_IMAGE=/vmlinuz-2.6.30-2-amd64 root=UUID=841f318e-1173-464d-a555-6e9ea5ecb1ce ro console=tty0 vga=791 quiet
** Tainted: P (1)
** Kernel log:
[ 3.233483] sata_via 0000:00:0f.0: routed to hard irq line 10
[ 3.233580] scsi0 : sata_via
[ 3.233840] scsi1 : sata_via
[ 3.233879] ata1: SATA max UDMA/133 cmd 0xe800 ctl 0xe400 bmdma 0xd400 irq 20
[ 3.233882] ata2: SATA max UDMA/133 cmd 0xe000 ctl 0xd800 bmdma 0xd408 irq 20
[ 3.436009] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.608470] ata1.00: ATA-6: HDS722516VLSA80, V34OA6MA, max UDMA/100
[ 3.608473] ata1.00: 321672960 sectors, multi 16: LBA48
[ 3.632495] ata1.00: configured for UDMA/100
[ 3.632620] scsi 0:0:0:0: Direct-Access ATA HDS722516VLSA80 V34O PQ: 0 ANSI: 5
[ 3.836007] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[ 3.856032] ide-cd driver 5.00
[ 3.860222] ide-cd: hda: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
[ 3.860231] Uniform CD-ROM driver Revision: 3.20
[ 3.870067] Driver 'sd' needs updating - please use bus_type methods
[ 3.870247] sd 0:0:0:0: [sda] 321672960 512-byte hardware sectors: (164 GB/153 GiB)
[ 3.870263] sd 0:0:0:0: [sda] Write Protect is off
[ 3.870267] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.870286] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.870388] sda:<6>ide-cd: hdc: ATAPI 48X DVD-ROM drive, 512kB Cache
[ 3.885884] sda1 sda2 sda3 sda4 < sda5 sda6 >
[ 3.917698] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.679328] kjournald starting. Commit interval 5 seconds
[ 4.679340] EXT3-fs: mounted filesystem with ordered data mode.
[ 6.406211] udev: starting version 141
[ 6.816277] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 6.816287] ACPI: Power Button [PWRF]
[ 6.816365] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 6.816372] ACPI: Power Button [PWRB]
[ 6.816442] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
[ 6.816447] ACPI: Sleep Button [SLPB]
[ 6.870205] processor ACPI_CPU:00: registered as cooling_device0
[ 6.873560] parport_pc 00:08: reported by Plug and Play ACPI
[ 6.873603] parport0: PC-style at 0x378, irq 7 [PCSPP]
[ 7.211547] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 7.228123] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 7.488854] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 8.204069] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input6
[ 8.421802] VIA 82xx Modem 0000:00:11.6: enabling device (0000 -> 0001)
[ 8.421812] alloc irq_desc for 22 on cpu 0 node 0
[ 8.421814] alloc kstat_irqs on cpu 0 node 0
[ 8.421825] VIA 82xx Modem 0000:00:11.6: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 9.176016] VIA 82xx Modem 0000:00:11.6: setting latency timer to 64
[ 9.680222] VIA 82xx Modem 0000:00:11.6: PCI INT C disabled
[ 9.680261] VIA 82xx Modem: probe of 0000:00:11.6 failed with error -13
[ 9.682172] VIA 82xx Audio 0000:00:11.5: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 9.682338] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64
[ 10.194912] codec_read: codec 0 is not valid [0xfe0000]
[ 10.201977] codec_read: codec 0 is not valid [0xfe0000]
[ 10.209082] codec_read: codec 0 is not valid [0xfe0000]
[ 10.216147] codec_read: codec 0 is not valid [0xfe0000]
[ 11.295150] Adding 1477972k swap on /dev/sda2. Priority:-1 extents:1 across:1477972k
[ 11.465069] EXT3 FS on sda5, internal journal
[ 11.630147] ide-gd driver 1.18
[ 11.646089] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
[ 11.826445] w83627hf: Found W83697HF chip at 0x290
[ 11.897066] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3200+ processors (1 cpu cores) (version 2.20.00)
[ 11.898194] [Firmware Bug]: powernow-k8: No PSB or ACPI _PSS objects
[ 18.693489] kjournald starting. Commit interval 5 seconds
[ 18.693747] EXT3 FS on sda1, internal journal
[ 18.693752] EXT3-fs: mounted filesystem with ordered data mode.
[ 18.718982] kjournald starting. Commit interval 5 seconds
[ 18.719366] EXT3 FS on sda6, internal journal
[ 18.719370] EXT3-fs: mounted filesystem with ordered data mode.
[ 18.728174] kjournald starting. Commit interval 5 seconds
[ 18.728490] EXT3 FS on sda3, internal journal
[ 18.728493] EXT3-fs: mounted filesystem with ordered data mode.
[ 19.834293] skge eth0: enabling interface
[ 19.838258] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 22.494205] skge eth0: Link is up at 1000 Mbps, full duplex, flow control both
[ 22.494679] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 23.034970] RPC: Registered udp transport module.
[ 23.034974] RPC: Registered tcp transport module.
[ 23.136603] Slow work thread pool: Starting up
[ 23.138176] Slow work thread pool: Ready
[ 23.138246] FS-Cache: Loaded
[ 23.223070] FS-Cache: Netfs 'nfs' registered for caching
[ 23.292209] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 26.104074] fuse init (API version 7.11)
[ 26.558530] NET: Registered protocol family 15
[ 26.589655] alg: No test for cipher_null (cipher_null-generic)
[ 26.589710] alg: No test for ecb(cipher_null) (ecb-cipher_null)
[ 26.589730] alg: No test for digest_null (digest_null-generic)
[ 26.589748] alg: No test for compress_null (compress_null-generic)
[ 26.681966] Intel AES-NI instructions are not detected.
[ 33.460008] eth0: no IPv6 routers present
[ 40.001375] lp0: using parport0 (interrupt-driven).
[ 40.010006] ppdev: user-space parallel port driver
[ 45.158830] svc: failed to register lockdv1 RPC service (errno 97).
[ 45.159333] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 45.171814] NFSD: starting 90-second grace period
[ 46.243103] nvidia: module license 'NVIDIA' taints kernel.
[ 46.243109] Disabling lock debugging due to kernel taint
[ 46.502180] alloc irq_desc for 16 on cpu 0 node 0
[ 46.502185] alloc kstat_irqs on cpu 0 node 0
[ 46.502197] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 46.502527] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 173.14.20 Thu Jun 25 18:15:32 PDT 2009
[ 46.634276] agpgart-amd64 0000:00:00.0: AGP 3.5 bridge
[ 46.634291] agpgart-amd64 0000:00:00.0: putting AGP V3 device into 8x mode
[ 46.634348] nvidia 0000:01:00.0: putting AGP V3 device into 8x mode
** Loaded modules:
Module Size Used by
nvidia 8091280 38
ppdev 7784 0
lp 10612 0
deflate 3104 0
zlib_deflate 19944 1 deflate
ctr 4624 0
twofish 6816 0
twofish_common 14464 1 twofish
camellia 18368 0
serpent 17616 0
blowfish 8768 0
cast5 17328 0
des_generic 16960 0
cbc 3776 0
cryptd 7352 0
aes_x86_64 8928 0
aes_generic 27840 1 aes_x86_64
xcbc 4872 0
rmd160 7904 0
sha256_generic 9440 0
sha1_generic 2528 0
hmac 4352 0
crypto_null 3696 0
af_key 29184 0
fuse 54768 1
rpcsec_gss_krb5 10240 0
nfsd 269328 9
exportfs 4656 1 nfsd
nfs 258400 2
lockd 68212 2 nfsd,nfs
fscache 41704 1 nfs
nfs_acl 3264 2 nfsd,nfs
auth_rpcgss 40912 3 rpcsec_gss_krb5,nfsd,nfs
sunrpc 196968 18 rpcsec_gss_krb5,nfsd,nfs,lockd,nfs_acl,auth_rpcgss
w83627hf 27604 0
hwmon_vid 3072 1 w83627hf
eeprom 6336 0
ide_generic 2452 0 [permanent]
ide_gd_mod 23432 0
snd_via82xx 24952 5
snd_via82xx_modem 12156 0
gameport 12624 1 snd_via82xx
snd_ac97_codec 113960 2 snd_via82xx,snd_via82xx_modem
ac97_bus 2080 1 snd_ac97_codec
snd_pcm_oss 37200 0
snd_mixer_oss 15072 1 snd_pcm_oss
snd_pcm 78472 5 snd_via82xx,snd_via82xx_modem,snd_ac97_codec,snd_pcm_oss
snd_mpu401_uart 7552 1 snd_via82xx
snd_seq_midi 6976 0
snd_rawmidi 23008 2 snd_mpu401_uart,snd_seq_midi
snd_seq_midi_event 7712 1 snd_seq_midi
snd_seq 51376 2 snd_seq_midi,snd_seq_midi_event
snd_timer 21824 2 snd_pcm,snd_seq
snd_seq_device 7476 3 snd_seq_midi,snd_rawmidi,snd_seq
shpchp 32588 0
psmouse 42172 0
k8temp 5152 0
i2c_viapro 8296 0
snd 63912 20 snd_via82xx,snd_via82xx_modem,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_mpu401_uart,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
pcspkr 2800 0
evdev 10448 10
i2c_core 25456 3 nvidia,eeprom,i2c_viapro
snd_page_alloc 9984 3 snd_via82xx,snd_via82xx_modem,snd_pcm
soundcore 7984 1 snd
pci_hotplug 29040 1 shpchp
serio_raw 5844 0
parport_pc 27080 1
processor 40208 0
button 6512 0
parport 38224 3 ppdev,lp,parport_pc
ext3 122848 4
jbd 48152 1 ext3
mbcache 8804 1 ext3
sd_mod 33736 6
crc_t10dif 2096 1 sd_mod
ide_cd_mod 29048 0
cdrom 34344 1 ide_cd_mod
ide_pci_generic 4964 0
ata_generic 5924 0
sata_via 11444 5
via82cxxx 7300 0
uhci_hcd 22208 0
libata 175660 2 ata_generic,sata_via
ehci_hcd 33996 0
ide_core 104976 5 ide_generic,ide_gd_mod,ide_cd_mod,ide_pci_generic,via82cxxx
scsi_mod 158768 2 sd_mod,libata
skge 39104 0
floppy 55400 0
thermal 15936 0
fan 5240 0
thermal_sys 16448 3 processor,thermal,fan
** PCI devices:
00:00.0 Host bridge [0600]: VIA Technologies, Inc. VT8385 [K8T800 AGP] Host Bridge [1106:3188] (rev 01)
Subsystem: ASUSTeK Computer Inc. K8V Deluxe/K8V-X motherboard [1043:80a3]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 8
Region 0: Memory at <ignored> (32-bit, prefetchable)
Capabilities: <access denied>
Kernel driver in use: agpgart-amd64
00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT8237 PCI bridge [K8T800/K8T890 South] [1106:b188] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: f5700000-f78fffff
Prefetchable memory behind bridge: e5600000-f55fffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR+
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:0a.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8001 Gigabit Ethernet Controller [11ab:4320] (rev 13)
Subsystem: ASUSTeK Computer Inc. Marvell 88E8001 Gigabit Ethernet Controller (Asus) [1043:811a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (5750ns min, 7750ns max), Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at f7e00000 (32-bit, non-prefetchable) [size=16K]
Region 1: I/O ports at cc00 [size=256]
Expansion ROM at f7d00000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: skge
00:0f.0 RAID bus controller [0104]: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller [1106:3149] (rev 80)
Subsystem: ASUSTeK Computer Inc. A7V600/K8V Deluxe/K8V-X/A8V Deluxe motherboard [1043:80ed]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin B routed to IRQ 20
Region 0: I/O ports at e800 [size=8]
Region 1: I/O ports at e400 [size=4]
Region 2: I/O ports at e000 [size=8]
Region 3: I/O ports at d800 [size=4]
Region 4: I/O ports at d400 [size=16]
Region 5: I/O ports at d000 [size=256]
Capabilities: <access denied>
Kernel driver in use: sata_via
00:0f.1 IDE interface [0101]: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] (rev 06) (prog-if 8a [Master SecP PriP])
Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X/A8V Deluxe motherboard [1043:80ed]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin A routed to IRQ 20
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
Region 4: I/O ports at fc00 [size=16]
Capabilities: <access denied>
Kernel driver in use: VIA_IDE
00:10.0 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 81) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X/A8V Deluxe motherboard [1043:80ed]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 21
Region 4: I/O ports at dc00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:10.1 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 81) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X/A8V Deluxe motherboard [1043:80ed]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 21
Region 4: I/O ports at ec00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:10.2 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 81) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X/A8V Deluxe motherboard [1043:80ed]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 256 bytes
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at c000 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:10.3 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 81) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X/A8V Deluxe motherboard [1043:80ed]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 256 bytes
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at c400 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:10.4 USB Controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] (rev 86) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X/A8V Deluxe motherboard [1043:80ed]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 256 bytes
Interrupt: pin C routed to IRQ 21
Region 0: Memory at f7f00000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:11.0 ISA bridge [0601]: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South] [1106:3227]
Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X/A8V Deluxe motherboard [1043:80ed]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:11.5 Multimedia audio controller [0401]: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller [1106:3059] (rev 60)
Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X/K8V Deluxe motherboard (ADI AD1980 codec [SoundMAX]) [1043:80b0]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 22
Region 0: I/O ports at c800 [size=256]
Capabilities: <access denied>
Kernel driver in use: VIA 82xx Audio
00:11.6 Communication controller [0780]: VIA Technologies, Inc. AC'97 Modem Controller [1106:3068] (rev 80)
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 22
Region 0: I/O ports at 1000 [size=256]
Capabilities: <access denied>
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel driver in use: k8temp
01:00.0 VGA compatible controller [0300]: nVidia Corporation NV34 [GeForce FX 5200] [10de:0322] (rev a1) (prog-if 00 [VGA controller])
Subsystem: CardExpert Technology Device [10b0:0431]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 248 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f6000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at e8000000 (32-bit, prefetchable) [size=128M]
[virtual] Expansion ROM at f7800000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: nvidia
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.30-2-amd64 (SMP w/1 CPU core)
Locale: LANG=en_GB, LC_CTYPE=en_GB (charmap=ISO-8859-1)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.30-2-amd64 depends on:
ii debconf [debconf-2.0] 1.5.27 Debian configuration management sy
ii initramfs-tools [linux-initra 0.93.4 tools for generating an initramfs
ii module-init-tools 3.10-3 tools for managing Linux kernel mo
linux-image-2.6.30-2-amd64 recommends no packages.
Versions of packages linux-image-2.6.30-2-amd64 suggests:
ii grub 0.97-58 GRand Unified Bootloader (dummy pa
pn linux-doc-2.6.30 <none> (no description available)
-- debconf information:
linux-image-2.6.30-2-amd64/preinst/bootloader-initrd-2.6.30-2-amd64: true
linux-image-2.6.30-2-amd64/preinst/initrd-2.6.30-2-amd64:
linux-image-2.6.30-2-amd64/preinst/lilo-has-ramdisk:
linux-image-2.6.30-2-amd64/postinst/kimage-is-a-directory:
linux-image-2.6.30-2-amd64/preinst/abort-install-2.6.30-2-amd64:
linux-image-2.6.30-2-amd64/postinst/depmod-error-initrd-2.6.30-2-amd64: false
linux-image-2.6.30-2-amd64/preinst/overwriting-modules-2.6.30-2-amd64: true
linux-image-2.6.30-2-amd64/postinst/old-dir-initrd-link-2.6.30-2-amd64: true
linux-image-2.6.30-2-amd64/postinst/old-system-map-link-2.6.30-2-amd64: true
linux-image-2.6.30-2-amd64/preinst/elilo-initrd-2.6.30-2-amd64: true
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.30-2-amd64/preinst/failed-to-move-modules-2.6.30-2-amd64:
linux-image-2.6.30-2-amd64/prerm/would-invalidate-boot-loader-2.6.30-2-amd64: true
linux-image-2.6.30-2-amd64/postinst/old-initrd-link-2.6.30-2-amd64: true
linux-image-2.6.30-2-amd64/postinst/bootloader-error-2.6.30-2-amd64:
linux-image-2.6.30-2-amd64/prerm/removing-running-kernel-2.6.30-2-amd64: true
linux-image-2.6.30-2-amd64/postinst/depmod-error-2.6.30-2-amd64: false
linux-image-2.6.30-2-amd64/preinst/lilo-initrd-2.6.30-2-amd64: true
linux-image-2.6.30-2-amd64/preinst/abort-overwrite-2.6.30-2-amd64:
linux-image-2.6.30-2-amd64/postinst/create-kimage-link-2.6.30-2-amd64: true
linux-image-2.6.30-2-amd64/postinst/bootloader-test-error-2.6.30-2-amd64:
Reply to: