Bug#547495: Debian Lenny 5.0.2 -- XEN Hypervisor 3.2.1 ; linux-image-2.6.26-2-xen-amd64 ; Hang under boot
Package: linux-image-2.6.26-2-xen-amd64
Version: 2.6.26-19
Severity: critical
Justification: breaks the whole system
I have an new installed Debian Lenny 5.0.2 (AMD64) install, I use stock debian kernel and Hypervisor;
DomO
OS: Debian Lenny 5.0.3
Kernel: 2.6.26-2-xen-amd64
Hyper: 3.2.1
PCI-backend: yes
Name: master
DomU
OS: Debian Lenny 5.0.3
Kernel: 2.6.26-2-xen-amd64
Name: webserver
The problem is that I wants to pass-throe to NIC's and one ISDN card to DomU.
And it works when I passes one NIC and the ISDN card, but when I try to pass the 2x NIC it starts normally, and then suddenly just hang up. With the only message in the console:
/sbin/dhclient-script: line 139: 1265 Segmentation fault ifconfig $interface inet 0 up
[ 16.013890] eth0: no IPv6 routers present
At first the to NIC was from same vendor and batch, so I thought it might had something to do with that, so I changed one of the NIC's to a 3Com 10/100 instead.
But it is still same error.
####
LOG with to identical NIC's:
# xm start webserver -c
[ 0.680186] Initializing cgroup subsys ns
[ 0.680191] Initializing cgroup subsys cpuacct
[ 0.680194] Initializing cgroup subsys devices
[ 0.680212] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.680217] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.680222] CPU: Physical Processor ID: 0
[ 0.680224] CPU: Processor Core ID: 3
[ 0.680235] SMP alternatives: switching to UP code
[ 0.685734] Freeing SMP alternatives: 21k freed
[ 0.685825] Brought up 1 CPUs
[ 0.688573] net_namespace: 1224 bytes
[ 0.688698] NET: Registered protocol family 16
[ 0.689506] Brought up 1 CPUs
[ 0.689519] PCI: Fatal: No config space access function found
[ 0.689524] PCI: setting up Xen PCI frontend stub
[ 0.689925] ACPI: Interpreter disabled.
[ 0.689932] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.689953] pnp: PnP ACPI: disabled
[ 0.690126] suspend: event channel 7
[ 0.690441] xen_mem: Initialising balloon driver.
[ 0.692429] usbcore: registered new interface driver usbfs
[ 0.692474] usbcore: registered new interface driver hub
[ 0.692510] usbcore: registered new device driver usb
[ 0.692628] PCI: System does not support PCI
[ 0.692632] PCI: System does not support PCI
[ 0.692937] pcifront pci-0: Installing PCI frontend
[ 0.693022] pcifront pci-0: Creating PCI Frontend Bus 0000:00
[ 0.704735] NET: Registered protocol family 2
[ 0.740470] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.740631] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[ 0.741215] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.741512] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.741517] TCP reno registered
[ 0.752477] NET: Registered protocol family 1
[ 0.752544] checking if image is initramfs... it is
[ 0.765260] Freeing initrd memory: 22036k freed
[ 0.771426] platform rtc_cmos: registered platform RTC device (no PNP device found)
[ 0.771642] audit: initializing netlink socket (disabled)
[ 0.771654] type=2000 audit(1253380351.924:1): initialized
[ 0.771798] VFS: Disk quotas dquot_6.5.1
[ 0.771816] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.771831] msgmni has been set to 2091
[ 0.771889] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.771894] io scheduler noop registered
[ 0.771897] io scheduler anticipatory registered
[ 0.771899] io scheduler deadline registered
[ 0.771905] io scheduler cfq registered (default)
[ 0.772773] Linux agpgart interface v0.103
[ 0.772802] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 0.773598] brd: module loaded
[ 0.773643] input: Macintosh mouse button emulation as /class/input/input0
[ 0.773687] Xen virtual console successfully installed as hvc0
[ 0.773717] Event-channel device installed.
[ 0.779980] netfront: Initialising virtual ethernet driver.
[ 0.783113] PNP: No PS/2 controller found. Probing ports directly.
[ 0.783929] i8042.c: No controller found.
[ 0.784464] xen-vbd: registered block device major 202
[ 0.784475] blkfront: xvda1: barriers enabled
[ 0.788666] blkfront: xvda2: barriers enabled
[ 0.792074] mice: PS/2 mouse device common for all mice
[ 0.792146] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[ 0.792217] No iBFT detected.
[ 0.792475] TCP cubic registered
[ 0.792479] NET: Registered protocol family 17
[ 0.792533] registered taskstats version 1
[ 0.792561] XENBUS: Device with no driver: device/console/0
[ 0.792564] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 0.792571] Freeing unused kernel memory: 216k freed
Loading, please wait...
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... FATAL: Error inserting fan (/lib/modules/2.6.26-1-xen-amd64/kernel/drivers/acpi/fan.ko): No such device
WARNING: Error inserting processor (/lib/modules/2.6.26-1-xen-amd64/kernel/drivers/acpi/processor.ko): No such device
[ 0.888575] thermal: Unknown symbol acpi_processor_set_thermal_limit
FATAL: Error inserting thermal (/lib/modules/2.6.26-1-xen-amd64/kernel/drivers/acpi/thermal.ko): Unknown symbol in module, or unknown parameter (see dmesg)
[ 1.079030] r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
[ 1.079221] r8169 0000:00:01.0: enabling device (0000 -> 0003)
[ 1.079684] eth1: RTL8169sb/8110sb at 0xffffc20000024800, 00:14:d1:17:6c:74, XID 10000000 IRQ 21
[ 1.080269] r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
[ 1.080404] r8169 0000:00:02.0: enabling device (0000 -> 0003)
[ 1.080800] eth2: RTL8169sb/8110sb at 0xffffc20000026400, 00:14:d1:17:fb:b8, XID 10000000 IRQ 22
done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... Begin: Loading[ 1.128810] md: raid1 personality registered for level 1
Success: loaded module raid1.
[ 1.132390] xor: automatically using best checksumming function: generic_sse
[ 1.152002] generic_sse: 8805.000 MB/sec
[ 1.152006] xor: using function: generic_sse (8805.000 MB/sec)
[ 1.153152] async_tx: api initialized (async)
[ 1.220010] raid6: int64x1 3094 MB/s
[ 1.288017] raid6: int64x2 3916 MB/s
[ 1.356023] raid6: int64x4 3750 MB/s
[ 1.424020] raid6: int64x8 2244 MB/s
[ 1.492040] raid6: sse2x1 3862 MB/s
[ 1.560042] raid6: sse2x2 5979 MB/s
[ 1.628044] raid6: sse2x4 6638 MB/s
[ 1.628047] raid6: using algorithm sse2x4 (6638 MB/s)
[ 1.628053] md: raid6 personality registered for level 6
[ 1.628056] md: raid5 personality registered for level 5
[ 1.628059] md: raid4 personality registered for level 4
Success: loaded module raid456.
done.
Begin: Assembling all MD arrays ... [ 1.638999] md: md0 stopped.
mdadm: no devices found for /dev/md0
[ 1.642798] md: md1 stopped.
mdadm: no devices found for /dev/md1
[ 1.646302] md: md2 stopped.
mdadm: no devices found for /dev/md2
[ 1.649940] md: md3 stopped.
mdadm: no devices found for /dev/md3
[ 1.653559] md: md4 stopped.
mdadm: no devices found for /dev/md4
Failure: failed to assemble all arrays.
done.
Begin: Waiting for udev to process events ... done.
[ 1.674302] device-mapper: uevent: version 1.0.3
[ 1.675094] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
done.
Begin: Running /scripts/local-premount ... done.
[ 1.716286] kjournald starting. Commit interval 5 seconds
[ 1.716296] EXT3-fs: mounted filesystem with ordered data mode.
Begin: Running /scripts/local-bottom ... done.
done.
Begin: Running /scripts/init-bottom ... done.
INIT: version 2.86 booting
Starting the hotplug events dispatcher: udevd[ 2.809611] udevd version 125 started
.
Synthesizing the initial hotplug events...done.
Waiting for /dev to be fully populated...[ 3.347531] ISDN subsystem Rev: 1.1.2.3/1.1.2.3/1.1.2.2/1.1.2.3/1.1.2.2/1.1.2.2 loaded
[ 3.391419] HiSax: Linux Driver for passive ISDN cards
[ 3.391430] HiSax: Version 3.5 (module)
[ 3.391433] HiSax: Layer1 Revision 2.46.2.5
[ 3.391436] HiSax: Layer2 Revision 2.30.2.4
[ 3.391438] HiSax: TeiMgr Revision 2.20.2.3
[ 3.391440] HiSax: Layer3 Revision 2.22.2.3
[ 3.391443] HiSax: LinkLayer Revision 2.59.2.4
done.
Setting the system clock.
Cannot access the Hardware Clock via any known method.
Use the --debug option to see the details of our search for an access method.
Unable to set System Clock to: Sat Sep 19 17:12:34 UTC 2009 (warning).
Activating swap...[ 3.519771] Adding 131064k swap on /dev/xvda1. Priority:-1 extents:1 across:131064k
done.
Checking root file system...fsck 1.41.3 (12-Oct-2008)
/dev/xvda2: clean, 286203/10485760 files, 8393649/41943040 blocks
done.
[ 3.833244] EXT3 FS on xvda2, internal journal
Setting the system clock.
Cannot access the Hardware Clock via any known method.
Use the --debug option to see the details of our search for an access method.
Unable to set System Clock to: Sat Sep 19 17:12:35 UTC 2009 (warning).
Cleaning up ifupdown....
Loading kernel modules...done.
Setting up LVM Volume Groups Reading all physical volumes. This may take a while...
.
Checking file systems...fsck 1.41.3 (12-Oct-2008)
done.
Setting kernel variables (/etc/sysctl.conf)...done.
Mounting local filesystems...mount: none already mounted or /dev/pts busy
mount: according to mtab, devpts is already mounted on /dev/pts
failed.
Activating swapfile swap...done.
Setting up networking....
Configuring network interfaces...[ 5.890618] NET: Registered protocol family 10
[ 5.890893] lo: Disabled Privacy Extensions
if-up.d/mountnfs[eth0]: waiting for interface eth3 before doing NFS mounts (warning).
if-up.d/mountnfs[eth0]: waiting for interface eth2 before doing NFS mounts (warning).
Internet Systems Consortium DHCP Client V3.1.1
Copyright 2004-2008 Internet Systems Consortium.
All rights reserved.
For info, please visit http://www.isc.org/sw/dhcp/
SIOCSIFADDR: No such device
eth3: ERROR while getting interface flags: No such device
eth3: ERROR while getting interface flags: No such device
Bind socket to interface: No such device
Failed to bring up eth3.
Internet Systems Consortium DHCP Client V3.1.1
Copyright 2004-2008 Internet Systems Consortium.
All rights reserved.
For info, please visit http://www.isc.org/sw/dhcp/
[ 7.611998] Fatal DMA error! Please use 'swiotlb=force'
[ 7.612033] ------------[ cut here ]------------
[ 7.612036] kernel BUG at arch/x86/kernel/pci-nommu-xen.c:70!
[ 7.612040] invalid opcode: 0000 [1] SMP
[ 7.612044] CPU 0
[ 7.612046] Modules linked in: ipv6 hisax crc_ccitt isdn slhc evdev ext3 jbd mbcache dm_mirror dm_log dm_snapshot dm_mod raid456 async_xor async_memcpy async_tx xor raid1 md_mod r8169 thermal_sys
[ 7.612073] Pid: 1259, comm: ifconfig Not tainted 2.6.26-1-xen-amd64 #1
[ 7.612076] RIP: e030:[<ffffffff80210dba>] [<ffffffff80210dba>] gnttab_map_single+0xf8/0x104
[ 7.612085] RSP: e02b:ffff88003e8f9ce8 EFLAGS: 00010292
[ 7.612089] RAX: 000000000000003e RBX: 000000020c7de000 RCX: 00003232000027d8
[ 7.612093] RDX: ffffffffff5f7000 RSI: 0000000000000000 RDI: 0000000000000000
[ 7.612101] RBP: 0000000000000812 R08: 0000000000000000 R09: ffff880001bc9080
[ 7.612105] R10: 000000000000003c R11: 000001000000003b R12: 0000000000000600
[ 7.612108] R13: ffff88003fd5b870 R14: 00000000000000e0 R15: 0000000000000600
[ 7.612114] FS: 00007f2852d866e0(0000) GS:ffffffff80539000(0000) knlGS:0000000000000000
[ 7.612119] CS: e033 DS: 0000 ES: 0000
[ 7.612122] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 7.612126] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 7.612130] Process ifconfig (pid: 1259, threadinfo ffff88003e8f8000, task ffff880001472a80)
[ 7.612134] Stack: 0000000000000000 ffff88003e48c880 ffff880001488e00 0000000000000000
[ 7.612141] 0000000000000002 ffffffffa000634f 0000002000000000 0000000000007ff0
[ 7.612147] ffff88003e338000 ffff88003e338700 000000e03e338000 ffff88003fd5b800
[ 7.612152] Call Trace:
[ 7.612160] [<ffffffffa000634f>] ? :r8169:rtl8169_rx_fill+0x13a/0x1ae
[ 7.612169] [<ffffffffa00071b1>] ? :r8169:rtl8169_init_ring+0x64/0x93
[ 7.612175] [<ffffffffa000748f>] ? :r8169:rtl8169_open+0xaf/0x1d8
[ 7.612180] [<ffffffff803c7dc2>] ? dev_open+0x6c/0xa0
[ 7.612185] [<ffffffff803c696a>] ? dev_change_flags+0xa6/0x15c
[ 7.612190] [<ffffffff80409959>] ? devinet_ioctl+0x242/0x59d
[ 7.612197] [<ffffffff802766b4>] ? handle_mm_fault+0x5f8/0xc46
[ 7.612202] [<ffffffff803ba825>] ? sock_ioctl+0x1d4/0x1f8
[ 7.612206] [<ffffffff80296659>] ? vfs_ioctl+0x21/0x6b
[ 7.612210] [<ffffffff802968eb>] ? do_vfs_ioctl+0x248/0x261
[ 7.612215] [<ffffffff80296955>] ? sys_ioctl+0x51/0x70
[ 7.612219] [<ffffffff8020b528>] ? system_call+0x68/0x6d
[ 7.612223] [<ffffffff8020b4c0>] ? system_call+0x0/0x6d
[ 7.612226]
[ 7.612228]
[ 7.612230] Code: eb 05 ba ff ff ff ff 48 c1 e3 0c 81 e5 ff 0f 00 00 48 f7 d2 48 8d 04 2b 48 85 d0 74 12 48 c7 c7 a6 c0 4a 80 31 c0 e8 a6 c8 01 00 <0f> 0b eb fe 5a 5b 5d 41 5c 41 5d c3 55 48 89 f7 89 d5 53 31 db
[ 7.612267] RIP [<ffffffff80210dba>] gnttab_map_single+0xf8/0x104
[ 7.612271] RSP <ffff88003e8f9ce8>
[ 7.612285] ---[ end trace 4a6d1b9c8782a2b3 ]---
/sbin/dhclient-script: line 139: 1259 Segmentation fault ifconfig $interface inet 0 up
[ 16.449985] eth0: no IPv6 routers present
####
LOG with to different NIC's:
# xm start webserver -c
[ ... ]
Loading, please wait...
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... FATAL: Error inserting fan (/lib/modules/2.6.26-2-xen-amd64/kernel/drivers/acpi/fan.ko): No such device
WARNING: Error inserting processor (/lib/modules/2.6.26-2-xen-amd64/kernel/drivers/acpi/processor.ko): No such device
[ 1.128572] thermal: Unknown symbol acpi_processor_set_thermal_limit
FATAL: Error inserting thermal (/lib/modules/2.6.26-2-xen-amd64/kernel/drivers/acpi/thermal.ko): Unknown symbol in module, or unknown parameter (see dmesg)
[ 1.334723] 3c59x 0000:00:01.0: enabling device (0000 -> 0003)
[ 1.335048] 3c59x: Donald Becker and others.
[ 1.335053] 0000:00:01.0: 3Com PCI 3c905C Tornado at ffffc20000024800.
[ 1.365028] r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
[ 1.365208] r8169 0000:00:02.0: enabling device (0000 -> 0003)
[ 1.365747] eth2: RTL8169sb/8110sb at 0xffffc20000026400, 00:14:d1:17:fb:b8, XID 10000000 IRQ 22
done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... Begin: Loading[ 1.428317] md: raid1 personality registered for level 1
Success: loaded module raid1.
[ ... ]
The rest of the log is identical.
# cat /etc/xen/webserver.cfg
#
# Networking
#
#dhcp = 'dhcp'
#vif = [ 'mac=00:16:3E:39:2D:0A', 'mac=00:16:3e:66:bf:1f' ]
vif = [ 'mac=00:16:3E:39:2D:0A' ]
pci = [ '0000:03:05.0', '0000:03:06.0', '0000:03:07.0' ]
#pci = [ '0000:03:05.0', '0000:03:06.0' ]
# DomO (master) extended info:
# lspci:
03:05.0 Network controller: Cologne Chip Designs GmbH ISDN network controller [HFC-PCI] (rev 02)
03:06.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 74)
03:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet (rev 10)
# cat /boot/grub/menu.lst
[ ... ]
title Xen 3.2-1-amd64 / Debian GNU/Linux, kernel 2.6.26-2-xen-amd64
root (hd0,1)
kernel /xen-3.2-1-amd64.gz
module /vmlinuz-2.6.26-2-xen-amd64 root=/dev/mapper/system-server ro console=tty0 pciback.hide=(0000:03:07.0)(0000:03:06.0)(0000:03:05.0)
module /initrd.img-2.6.26-2-xen-amd64
title Xen 3.2-1-amd64 / Debian GNU/Linux, kernel 2.6.26-1-xen-amd64
root (hd0,1)
kernel /xen-3.2-1-amd64.gz
module /vmlinuz-2.6.26-1-xen-amd64 root=/dev/mapper/system-server ro console=tty0 pciback.hide=(0000:03:07.0)(0000:03:06.0)(0000:03:05.0)
module /initrd.img-2.6.26-1-xen-amd64
[ ... ]
I don't know where to send this error, so I have sende it to XEN-Bugs and Debian Bugs.
-- System Information:
Debian Release: 5.0.3
APT prefers stable
APT policy: (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.26-2-xen-amd64 (SMP w/4 CPU cores)
Locale: LANG=da_DK.UTF-8, LC_CTYPE=da_DK.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.26-2-xen-amd64 depends on:
ii initramfs-tools 0.92o tools for generating an initramfs
ii linux-modules-2.6.26-2-xen-am 2.6.26-19 Linux 2.6.26 modules on AMD64
linux-image-2.6.26-2-xen-amd64 recommends no packages.
Versions of packages linux-image-2.6.26-2-xen-amd64 suggests:
ii grub 0.97-47lenny2 GRand Unified Bootloader (Legacy v
ii linux-doc-2.6.26 2.6.26-19 Linux kernel specific documentatio
-- no debconf information
Reply to: