[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

linux-2.6_2.6.30-7_amd64.changes is NEW



linux-2.6_2.6.30-7.diff.gz
  to pool/main/l/linux-2.6/linux-2.6_2.6.30-7.diff.gz
linux-2.6_2.6.30-7.dsc
  to pool/main/l/linux-2.6/linux-2.6_2.6.30-7.dsc
linux-doc-2.6.30_2.6.30-7_all.deb
  to pool/main/l/linux-2.6/linux-doc-2.6.30_2.6.30-7_all.deb
(new) linux-headers-2.6.30-2-all-amd64_2.6.30-7_amd64.deb optional kernel
All header files for Linux 2.6.30
 This package depends against all architecture-specific kernel header files
 for Linux kernel version 2.6.30, generally used for building out-of-tree
 kernel modules.
(new) linux-headers-2.6.30-2-all_2.6.30-7_amd64.deb optional kernel
All header files for Linux 2.6.30
 This package depends against all architecture-specific kernel header files
 for Linux kernel version 2.6.30, generally used for building out-of-tree
 kernel modules.
(new) linux-headers-2.6.30-2-amd64_2.6.30-7_amd64.deb optional kernel
Header files for Linux 2.6.30-2-amd64
 This package provides the architecture-specific kernel header files for
 Linux kernel 2.6.30-2-amd64, generally used for building out-of-tree
 kernel modules.  These files are going to be installed into
 /usr/src/linux-headers-2.6.30-2-amd64, and can be used for building
 modules that load into the kernel provided by the
 linux-image-2.6.30-2-amd64 package.
(new) linux-headers-2.6.30-2-common_2.6.30-7_amd64.deb optional kernel
Common header files for Linux 2.6.30-2
 This package provides the architecture-specific common kernel header files
 for Linux kernel version 2.6.30-2, generally used for building out-of-tree
 kernel modules.  To obtain a complete set of headers you also need to
 install the linux-headers-2.6.30-2-(flavour) package, matching the flavour
 of the kernel you intend the build for.
(new) linux-image-2.6.30-2-amd64_2.6.30-7_amd64.deb optional kernel
Linux 2.6.30 image on AMD64
 This package provides the binary image and pre-built loadable modules for
 Linux kernel 2.6.30 on all 64bit single- and multiprocessor AMD and Intel
 machines.
 .
 This kernel also runs on a Xen hypervisor.  It supports only unpriviledged
 (domU) operation.
linux-libc-dev_2.6.30-7_amd64.deb
  to pool/main/l/linux-2.6/linux-libc-dev_2.6.30-7_amd64.deb
linux-manual-2.6.30_2.6.30-7_all.deb
  to pool/main/l/linux-2.6/linux-manual-2.6.30_2.6.30-7_all.deb
linux-patch-debian-2.6.30_2.6.30-7_all.deb
  to pool/main/l/linux-2.6/linux-patch-debian-2.6.30_2.6.30-7_all.deb
linux-source-2.6.30_2.6.30-7_all.deb
  to pool/main/l/linux-2.6/linux-source-2.6.30_2.6.30-7_all.deb
(new) linux-support-2.6.30-2_2.6.30-7_all.deb optional devel
Support files for Linux 2.6.30
 This package provides support files for the Linux kernel build.
linux-tree-2.6.30_2.6.30-7_all.deb
  to pool/main/l/linux-2.6/linux-tree-2.6.30_2.6.30-7_all.deb
Changes: linux-2.6 (2.6.30-7) unstable; urgency=low
 .
  [ Martin Michlmayr ]
  * [armel/kirkwood] Enable eSATA on QNAP TS-219P (John Holland).
  * [armel/kirkwood] Marvell OpenRD-Base board support (Dhaval Vasa).
  * [armel/kirkwood] Initialise SATA for OpenRD-Base (Ron Lee).
  * [armel/kirkwood] Enable SATA_AHCI.
 .
  [ Ben Hutchings ]
  * qla1280: Release spinlock when requesting firmware (closes: #543244)
  * r128: Add test for initialisation to all ioctls that require it
    (closes: #541630)
  * [i386] Fix crash in text_poke_early() on 486-class processors
    (Closes: #515982)
  * intel-agp: Fix cache flushing on i8xx chipsets, avoiding graphics
    corruption and GPU lock-ups (Closes: #541307)
  * [i386] Allow ISA memory range uncacheable mapping requests
    (Closes: #538159)
  * Fix idle time in /proc/uptime (Closes: #545981)
  * e1000, e1000e, igb, ixgb, ixgbe, sfc: Fix initial link state
    (Closes: #546041)
 .
  [ Bastian Blank ]
  * Add stable release 2.6.30.5.
    - drm/i915: Hook connector to encoder during load detection
      (fixes tv/vga detect) (Closes: #522358)
  * Add stable release 2.6.30.6.
    - x86: Fix lock-up on SMP Pentium Pro, Pentium 2, Pentium 3, and
      Athlon MP systems (Closes: #542551)
    - NET: Fix information leaks from getsockname() (CVE-2009-3001,
      CVE-2009-3002)
    - iwl3945/rfkill: Reenable radio when hardware switch turned back on
      (Closes: #530554)
  * Bump ABI to 2.
  * Apply missing fixes:
    - block: fix sg SG_DXFER_TO_FROM_DEV regression.
    - sched_rt: Fix overload bug on rt group scheduling.
  * Add stable release 2.6.30.7.
  * [sparc] Disable PROM console. (closes: #525958)


Override entries for your package:
linux-2.6_2.6.30-7.dsc - source devel
linux-doc-2.6.30_2.6.30-7_all.deb - optional doc
linux-libc-dev_2.6.30-7_amd64.deb - optional devel
linux-manual-2.6.30_2.6.30-7_all.deb - optional doc
linux-patch-debian-2.6.30_2.6.30-7_all.deb - optional kernel
linux-source-2.6.30_2.6.30-7_all.deb - optional kernel
linux-tree-2.6.30_2.6.30-7_all.deb - optional devel

Announcing to debian-devel-changes@lists.debian.org
Closing bugs: 515982 522358 525958 530554 538159 541307 541630 542551 543244 545981 546041 


Your package contains new components which requires manual editing of
the override file.  It is ok otherwise, so please be patient.  New
packages are usually added to the override file about once a week.

You may have gotten the distribution wrong.  You'll get warnings above
if files already exist in other distributions.


Reply to: