Bug#545449: linux-image-2.6.26-2-686: Error inserting ebt_ulog: Cannot allocate memory
Package: linux-image-2.6.26-2-686
Version: 2.6.26-17lenny2
Severity: normal
ebt_ulog kernel module fails to load with the following error:
mull:~# modprobe ebt_ulog
FATAL: Error inserting ebt_ulog (/lib/modules/2.6.26-2-686/kernel/net/bridge/netfilter/ebt_ulog.ko): Cannot allocate memory
I also tried with various values of the nlbufsiz parameter, down to 0, but with no results
mull:~# strace modprobe ebt_ulog
...
fcntl64(3, F_SETLKW, {type=F_WRLCK, whence=SEEK_SET, start=0, len=1}) = 0
open("/proc/modules", O_RDONLY) = 4
fstat64(4, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7f09000
read(4, "ebtables 16480 0 - Live 0xf89a800"..., 1024) = 1024
read(4, "de_cd_mod,serverworks,ide_pci_gen"..., 1024) = 614
read(4, ""..., 1024) = 0
close(4) = 0
munmap(0xb7f09000, 4096) = 0
fstat64(3, {st_mode=S_IFREG|0644, st_size=9209, ...}) = 0
mmap2(NULL, 9209, PROT_READ|PROT_WRITE, MAP_PRIVATE, 3, 0) = 0xb7f07000
init_module(0xb7f07000, 9209, "") = -1 ENOMEM (Cannot allocate memory)
write(2, "FATAL: Error inserting ebt_ulog ("..., 124FATAL: Error inserting ebt_ulog
(/lib/modules/2.6.26-2-686/kernel/net/bridge/netfilter/ebt_ulog.ko): Cannot allocate memory
) = 124
exit_group(1) = ?
same problem reported in
https://lists.linux-foundation.org/pipermail/bugme-new/2005-May/012248.html
context: I was trying to setup a netflow probe with fprobe-ulog, for traffic port-mirrored by a switch, but mirrored traffic was not captured by
iptables as it was directed to a foreign mac address.
-- Package-specific info:
** Version:
Linux version 2.6.26-2-686 (Debian 2.6.26-17lenny2) (dannf@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Fri Aug 14 01:27:18 UTC 2009
** Command line:
root=/dev/sda1 ro
** Not tainted
** Kernel log:
[ 1.013472] SCSI subsystem initialized
[ 1.013472] ACPI: PCI Interrupt 0000:08:02.0[A] -> GSI 18 (level, low) -> IRQ 18
[ 1.097991] scsi0 : IBM PCI ServeRAID 7.12.05 Build 761 <ServeRAID 5i>
[ 1.101107] scsi 0:0:0:0: Direct-Access IBM SERVERAID 1.00 PQ: 0 ANSI: 2
[ 1.101107] scsi 0:0:15:0: Processor IBM SERVERAID 1.00 PQ: 0 ANSI: 2
[ 1.111618] scsi 0:1:8:0: Processor IBM 32P0032a S320 1 1 PQ: 0 ANSI: 2
[ 1.133644] ACPI: ACPI0007:00 is registered as cooling_device0
[ 1.133664] ACPI: ACPI0007:01 is registered as cooling_device1
[ 1.263911] Driver 'sd' needs updating - please use bus_type methods
[ 1.263911] sd 0:0:0:0: [sda] 71096320 512-byte hardware sectors (36401 MB)
[ 1.263911] sd 0:0:0:0: [sda] Assuming Write Enabled
[ 1.263911] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 1.263911] sd 0:0:0:0: [sda] 71096320 512-byte hardware sectors (36401 MB)
[ 1.263911] sd 0:0:0:0: [sda] Assuming Write Enabled
[ 1.263911] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 1.263911] sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 >
[ 1.319915] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.017909] PM: Starting manual resume from disk
[ 2.043236] kjournald starting. Commit interval 5 seconds
[ 2.045364] EXT3-fs: mounted filesystem with ordered data mode.
[ 3.312028] udevd version 125 started
[ 3.663200] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.663200] scsi 0:0:15:0: Attached scsi generic sg1 type 3
[ 3.663200] scsi 0:1:8:0: Attached scsi generic sg2 type 3
[ 4.288513] Linux agpgart interface v0.103
[ 4.516133] input: Power Button (FF) as /class/input/input1
[ 4.544138] Uniform Multi-Platform E-IDE driver
[ 4.544228] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 4.590035] ACPI: Power Button (FF) [PWRF]
[ 4.600902] usbcore: registered new interface driver usbfs
[ 4.600902] usbcore: registered new interface driver hub
[ 4.600902] usbcore: registered new device driver usb
[ 4.676428] piix4_smbus 0000:00:0f.0: Found 0000:00:0f.0 device
[ 4.688071] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 4.688071] ACPI: PCI Interrupt Link [LPUS] enabled at IRQ 11
[ 4.688071] ACPI: PCI Interrupt 0000:00:0f.2[A] -> Link [LPUS] -> GSI 11 (level, low) -> IRQ 11
[ 4.688071] ohci_hcd 0000:00:0f.2: OHCI Host Controller
[ 4.688071] ohci_hcd 0000:00:0f.2: new USB bus registered, assigned bus number 1
[ 4.688071] ohci_hcd 0000:00:0f.2: irq 11, io mem 0xfebfe000
[ 4.744061] usb usb1: configuration #1 chosen from 1 choice
[ 4.744061] hub 1-0:1.0: USB hub found
[ 4.744061] hub 1-0:1.0: 4 ports detected
[ 4.844399] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.844498] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.844595] usb usb1: Product: OHCI Host Controller
[ 4.844677] usb usb1: Manufacturer: Linux 2.6.26-2-686 ohci_hcd
[ 4.844764] usb usb1: SerialNumber: 0000:00:0f.2
[ 4.846544] SvrWks CSB5: IDE controller (0x1166:0x0212 rev 0x93) at PCI slot 0000:00:0f.1
[ 4.846674] SvrWks CSB5: not 100% native mode: will probe irqs later
[ 4.846790] SvrWks CSB5: simplex device: DMA forced
[ 4.846880] ide0: BM-DMA at 0x0700-0x0707
[ 4.846971] SvrWks CSB5: simplex device: DMA forced
[ 4.847052] ide1: BM-DMA at 0x0708-0x070f
[ 4.848758] Probing IDE interface ide0...
[ 5.586045] hda: LG CD-ROM CRN-8245B, ATAPI CD/DVD-ROM drive
[ 5.796634] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI
[ 5.796634] Copyright (c) 1999-2006 Intel Corporation.
[ 5.841193] Floppy drive(s): fd0 is 1.44M
[ 5.870988] FDC 0 is a National Semiconductor PC87306
[ 5.968826] input: PC Speaker as /class/input/input2
[ 6.128898] Error: Driver 'pcspkr' is already registered, aborting...
[ 6.263411] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 6.263622] hda: UDMA/33 mode selected
[ 6.263881] Probing IDE interface ide1...
[ 6.825082] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 6.825242] ide1 at 0x170-0x177,0x376 on irq 15
[ 6.828994] ACPI: PCI Interrupt 0000:06:08.0[A] -> GSI 29 (level, low) -> IRQ 29
[ 6.854414] No dock devices found.
[ 7.102412] e1000: 0000:06:08.0: e1000_probe: (PCI-X:100MHz:64-bit) 00:09:6b:f1:76:38
[ 7.106411] libata version 3.00 loaded.
[ 7.141170] input: ImExPS/2 Generic Explorer Mouse as /class/input/input3
[ 7.144615] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
[ 7.144759] ACPI: PCI Interrupt 0000:06:08.1[B] -> GSI 30 (level, low) -> IRQ 30
[ 7.425304] e1000: 0000:06:08.1: e1000_probe: (PCI-X:100MHz:64-bit) 00:09:6b:f1:76:39
[ 7.461304] e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
[ 7.579137] hda: ATAPI 24X CD-ROM drive, 128kB Cache
[ 7.579137] Uniform CD-ROM driver Revision: 3.20
[ 7.963298] Adding 2650684k swap on /dev/sda7. Priority:-1 extents:1 across:2650684k
[ 8.293924] EXT3 FS on sda1, internal journal
[ 8.733361] loop: module loaded
[ 9.999291] kjournald starting. Commit interval 5 seconds
[ 10.016771] EXT3 FS on sda9, internal journal
[ 10.016771] EXT3-fs: mounted filesystem with ordered data mode.
[ 9.999291] kjournald starting. Commit interval 5 seconds
[ 10.027127] EXT3 FS on sda8, internal journal
[ 10.027127] EXT3-fs: mounted filesystem with ordered data mode.
[ 10.048655] kjournald starting. Commit interval 5 seconds
[ 10.054235] EXT3 FS on sda5, internal journal
[ 10.054359] EXT3-fs: mounted filesystem with ordered data mode.
[ 10.067126] kjournald starting. Commit interval 5 seconds
[ 10.076689] EXT3 FS on sda6, internal journal
[ 10.076812] EXT3-fs: mounted filesystem with ordered data mode.
[ 10.709144] e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX
[ 12.389537] NET: Registered protocol family 10
[ 12.389537] lo: Disabled Privacy Extensions
[ 13.475286] device eth0 entered promiscuous mode
[ 14.156638] warning: `ntpd' uses 32-bit capabilities (legacy support in use)
[ 14.850720] device eth0 left promiscuous mode
[ 24.341647] eth0: no IPv6 routers present
[ 86.175552] Ebtables v2.0 registered
** Loaded modules:
Module Size Used by
ebtables 16480 0
ipt_ULOG 6820 1
x_tables 13284 1 ipt_ULOG
ipv6 235364 18
loop 12748 0
ide_cd_mod 27652 0
cdrom 30176 1 ide_cd_mod
ata_generic 4676 0
libata 140416 1 ata_generic
dock 8304 1 libata
serio_raw 4740 0
snd_pcm 62596 0
snd_timer 17800 1 snd_pcm
snd 45604 2 snd_pcm,snd_timer
psmouse 32336 0
soundcore 6368 1 snd
snd_page_alloc 7816 1 snd_pcm
pcspkr 2432 0
floppy 47748 0
e1000 102560 0
serverworks 4932 0 [permanent]
ohci_hcd 18500 0
i2c_piix4 7216 0
ide_pci_generic 3908 0 [permanent]
i2c_core 19828 1 i2c_piix4
usbcore 118224 2 ohci_hcd
ide_core 96136 3 ide_cd_mod,serverworks,ide_pci_generic
button 6096 0
sworks_agp 6720 0
agpgart 28776 1 sworks_agp
evdev 8000 0
sg 26964 0
ext3 105512 5
jbd 39444 1 ext3
mbcache 7108 1 ext3
sd_mod 22200 7
thermal 15228 0
processor 32544 1 thermal
fan 4164 0
thermal_sys 10856 3 thermal,processor,fan
ips 36348 6
scsi_mod 129324 4 libata,sg,sd_mod,ips
** PCI devices:
00:00.0 Host bridge [0600]: Broadcom CMIC-WS Host Bridge (GC-LE chipset) [1166:0012] (rev 13)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel modules: sworks-agp
00:00.1 Host bridge [0600]: Broadcom CMIC-WS Host Bridge (GC-LE chipset) [1166:0012]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel modules: sworks-agp
00:00.2 Host bridge [0600]: Broadcom CMIC-LE [1166:0000]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel modules: sworks-agp
00:06.0 VGA compatible controller [0300]: ATI Technologies Inc Rage XL [1002:4752] (rev 27) (prog-if 00 [VGA controller])
Subsystem: IBM Device [1014:0240]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (2000ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
Region 1: I/O ports at 2400 [size=256]
Region 2: Memory at febff000 (32-bit, non-prefetchable) [size=4K]
[virtual] Expansion ROM at 50000000 [disabled] [size=128K]
Capabilities: <access denied>
00:0f.0 Host bridge [0600]: Broadcom CSB5 South Bridge [1166:0201] (rev 93)
Subsystem: Broadcom CSB5 South Bridge [1166:0201]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 64
Kernel driver in use: piix4_smbus
Kernel modules: i2c-piix4, sworks-agp
00:0f.1 IDE interface [0101]: Broadcom CSB5 IDE Controller [1166:0212] (rev 93) (prog-if 82 [Master PriP])
Subsystem: Broadcom CSB5 IDE Controller [1166:0212]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 0700 [size=16]
Kernel driver in use: Serverworks_IDE
Kernel modules: serverworks
00:0f.2 USB Controller [0c03]: Broadcom OSB4/CSB5 OHCI USB Controller [1166:0220] (rev 05) (prog-if 10 [OHCI])
Subsystem: Broadcom OSB4/CSB5 OHCI USB Controller [1166:0220]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (20000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at febfe000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:0f.3 ISA bridge [0601]: Broadcom CSB5 LPC bridge [1166:0225]
Subsystem: Broadcom Device [1166:0230]
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:10.0 Host bridge [0600]: Broadcom CIOB-X2 PCI-X I/O Bridge [1166:0101] (rev 03)
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel modules: sworks-agp
00:10.2 Host bridge [0600]: Broadcom CIOB-X2 PCI-X I/O Bridge [1166:0101] (rev 03)
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel modules: sworks-agp
00:11.0 Host bridge [0600]: Broadcom CIOB-X2 PCI-X I/O Bridge [1166:0101] (rev 03)
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel modules: sworks-agp
00:11.2 Host bridge [0600]: Broadcom CIOB-X2 PCI-X I/O Bridge [1166:0101] (rev 03)
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel modules: sworks-agp
06:08.0 Ethernet controller [0200]: Intel Corporation 82546EB Gigabit Ethernet Controller (Copper) [8086:1010] (rev 01)
Subsystem: IBM PRO/1000 MT Dual Port Network Adapter [1014:027c]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (63750ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 29
Region 0: Memory at fbfe0000 (64-bit, non-prefetchable) [size=128K]
Region 4: I/O ports at 2500 [size=64]
Capabilities: <access denied>
Kernel driver in use: e1000
Kernel modules: e1000
06:08.1 Ethernet controller [0200]: Intel Corporation 82546EB Gigabit Ethernet Controller (Copper) [8086:1010] (rev 01)
Subsystem: IBM PRO/1000 MT Dual Port Network Adapter [1014:027c]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (63750ns min), Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 30
Region 0: Memory at fbfc0000 (64-bit, non-prefetchable) [size=128K]
Region 4: I/O ports at 2540 [size=64]
Capabilities: <access denied>
Kernel driver in use: e1000
Kernel modules: e1000
08:02.0 RAID bus controller [0104]: IBM ServeRAID Controller [1014:01bd]
Subsystem: IBM ServeRAID-5i [1014:0259]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at f4000000 (32-bit, prefetchable) [size=64M]
[virtual] Expansion ROM at 50020000 [disabled] [size=32K]
Capabilities: <access denied>
Kernel driver in use: ips
Kernel modules: ips
-- System Information:
Debian Release: 5.0.2
APT prefers stable
APT policy: (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 2.6.26-2-686 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.26-2-686 depends on:
ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92o tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.26-2-686 recommends:
ii libc6-i686 2.7-18 GNU C Library: Shared libraries [i
Versions of packages linux-image-2.6.26-2-686 suggests:
ii grub 0.97-47lenny2 GRand Unified Bootloader (Legacy v
pn linux-doc-2.6.26 <none> (no description available)
-- debconf information:
linux-image-2.6.26-2-686/postinst/bootloader-error-2.6.26-2-686:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.26-2-686/postinst/old-dir-initrd-link-2.6.26-2-686: true
linux-image-2.6.26-2-686/preinst/overwriting-modules-2.6.26-2-686: true
linux-image-2.6.26-2-686/postinst/bootloader-test-error-2.6.26-2-686:
linux-image-2.6.26-2-686/postinst/depmod-error-2.6.26-2-686: false
linux-image-2.6.26-2-686/preinst/bootloader-initrd-2.6.26-2-686: true
linux-image-2.6.26-2-686/preinst/abort-overwrite-2.6.26-2-686:
linux-image-2.6.26-2-686/preinst/abort-install-2.6.26-2-686:
linux-image-2.6.26-2-686/postinst/depmod-error-initrd-2.6.26-2-686: false
linux-image-2.6.26-2-686/postinst/create-kimage-link-2.6.26-2-686: true
linux-image-2.6.26-2-686/preinst/failed-to-move-modules-2.6.26-2-686:
linux-image-2.6.26-2-686/preinst/initrd-2.6.26-2-686:
linux-image-2.6.26-2-686/preinst/lilo-has-ramdisk:
linux-image-2.6.26-2-686/prerm/would-invalidate-boot-loader-2.6.26-2-686: true
linux-image-2.6.26-2-686/postinst/kimage-is-a-directory:
linux-image-2.6.26-2-686/postinst/old-initrd-link-2.6.26-2-686: true
linux-image-2.6.26-2-686/preinst/elilo-initrd-2.6.26-2-686: true
linux-image-2.6.26-2-686/preinst/lilo-initrd-2.6.26-2-686: true
linux-image-2.6.26-2-686/prerm/removing-running-kernel-2.6.26-2-686: true
linux-image-2.6.26-2-686/postinst/old-system-map-link-2.6.26-2-686: true
Reply to: