Bug#543308: dmesg & lspci from 2.6.26-2
Hello.
I was wondering why that info wasn't there. It's attached. Notice that
the MPT/LSI Logic SCSI device now appears.
Sincerely,
Sean M. Pappalardo
<<--------------------------------------------------------------------------------->>
This E-Mail message has been scanned for viruses
and cleared by >>SmartMail<< from Smarter Technology, Inc.
<<--------------------------------------------------------------------------------->>
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.26-2-amd64 (Debian 2.6.26-17) (dannf@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Sun Jun 21 04:47:08 UTC 2009
[ 0.000000] Command line: root=/dev/sda2 ro
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d400 (usable)
[ 0.000000] BIOS-e820: 000000000009d400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007fff9300 (usable)
[ 0.000000] BIOS-e820: 000000007fff9300 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] Entering add_active_range(0, 0, 157) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 524281) 1 entries of 3200 used
[ 0.000000] max_pfn_mapped = 1048576
[ 0.000000] init_memory_mapping
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP 000E8010, 0024 (r2 HP )
[ 0.000000] ACPI: XSDT 7FFF94FC, 0044 (r1 HP CPQ0062 20061128 0)
[ 0.000000] ACPI: FACP 7FFF96A4, 010C (r3 HP VIPER 1 0)
[ 0.000000] ACPI Warning (tbfadt-0230): FADT (revision 3) is longer than ACPI 2.0 version, truncating length 0x10C to 0xF4 [20080321]
[ 0.000000] ACPI: DSDT 7FFF989A, 14AF (r1 HP DSDT 1 MSFT 100000E)
[ 0.000000] ACPI: FACS 7FFF9300, 0040
[ 0.000000] ACPI: SSDT 7FFFAD49, 3C2B (r2 HP PROJECT 1 MSFT 100000E)
[ 0.000000] ACPI: APIC 7FFF97B0, 009E (r1 HP VIPER 1 0)
[ 0.000000] ACPI: MCFG 7FFF984E, 004C (r1 HP VIPER 1 0)
[ 0.000000] ACPI: DMI detected: Hewlett-Packard
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] Number of nodes 2
[ 0.000000] Node 0 using interleaving mode 1/1
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000007fff9000
[ 0.000000] Entering add_active_range(0, 0, 157) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 524281) 1 entries of 3200 used
[ 0.000000] Bootmem setup node 0 0000000000000000-000000007fff9000
[ 0.000000] NODE_DATA [000000000000c000 - 0000000000010fff]
[ 0.000000] bootmap [0000000000011000 - 0000000000020fff] pages 10
[ 0.000000] early res: 0 [0-fff] BIOS data page
[ 0.000000] early res: 1 [6000-7fff] TRAMPOLINE
[ 0.000000] early res: 2 [200000-673397] TEXT DATA BSS
[ 0.000000] early res: 3 [3760f000-37fef36a] RAMDISK
[ 0.000000] early res: 4 [9d400-fffff] BIOS reserved
[ 0.000000] early res: 5 [8000-bfff] PGTABLE
[ 0.000000] [ffffe20000000000-ffffe20001bfffff] PMD -> [ffff810001200000-ffff810002dfffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] DMA32 4096 -> 1048576
[ 0.000000] Normal 1048576 -> 1048576
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0 -> 157
[ 0.000000] 0: 256 -> 524281
[ 0.000000] On node 0 totalpages: 524182
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 1246 pages reserved
[ 0.000000] DMA zone: 2695 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7112 pages used for memmap
[ 0.000000] DMA32 zone: 513073 pages, LIFO batch:31
[ 0.000000] Normal zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] ACPI: PM-Timer IO Port: 0xf808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfa600000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 9, version 0, address 0xfa600000, GSI 24-27
[ 0.000000] ACPI: IOAPIC (id[0x0a] address[0xfa601000] gsi_base[28])
[ 0.000000] IOAPIC[2]: apic_id 10, version 0, address 0xfa601000, GSI 28-31
[ 0.000000] ACPI: IOAPIC (id[0x0b] address[0xfa700000] gsi_base[32])
[ 0.000000] IOAPIC[3]: apic_id 11, version 0, address 0xfa700000, GSI 32-55
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Setting APIC routing to flat
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e8000
[ 0.000000] PM: Registered nosave memory: 00000000000e8000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000)
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PERCPU: Allocating 37168 bytes of per cpu data
[ 0.000000] NR_CPUS: 32, nr_cpu_ids: 4
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 515768
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: root=/dev/sda2 ro
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] TSC calibrated against PM_TIMER
[ 0.000000] Marking TSC unstable due to TSCs unsynchronized
[ 0.000000] time.c: Detected 1994.687 MHz processor.
[ 0.004000] spurious 8259A interrupt: IRQ7.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Checking aperture...
[ 0.004000] Node 0: aperture @ 74c0000000 size 32 MB
[ 0.004000] Aperture beyond 4GB. Ignoring.
[ 0.004000] No AGP bridge found
[ 0.004000] Memory: 2053024k/2097124k available (2225k kernel code, 43704k reserved, 1080k data, 392k init)
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.084121] Calibrating delay using timer specific routine.. 3992.05 BogoMIPS (lpj=7984102)
[ 0.084237] Security Framework initialized
[ 0.084274] SELinux: Disabled at boot.
[ 0.084308] Capability LSM initialized
[ 0.084557] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.086054] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.086803] Mount-cache hash table entries: 256
[ 0.087026] Initializing cgroup subsys ns
[ 0.087062] Initializing cgroup subsys cpuacct
[ 0.087096] Initializing cgroup subsys devices
[ 0.087147] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.087183] CPU: L2 Cache: 1024K (64 bytes/line)
[ 0.087217] CPU 0/0 -> Node 0
[ 0.087260] CPU: Physical Processor ID: 0
[ 0.087292] CPU: Processor Core ID: 0
[ 0.088005] ACPI: Core revision 20080321
[ 0.141313] CPU0: Dual Core AMD Opteron(tm) Processor 270 stepping 02
[ 0.141390] Using local APIC timer interrupts.
[ 0.148009] APIC timer calibration result 12466791
[ 0.148009] Detected 12.466 MHz APIC timer.
[ 0.148009] Booting processor 1/1 ip 6000
[ 0.156009] Initializing CPU#1
[ 0.156009] Calibrating delay using timer specific routine.. 3989.45 BogoMIPS (lpj=7978901)
[ 0.156009] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.156009] CPU: L2 Cache: 1024K (64 bytes/line)
[ 0.156009] CPU 1/1 -> Node 0
[ 0.156009] CPU: Physical Processor ID: 0
[ 0.156009] CPU: Processor Core ID: 1
[ 0.235984] CPU1: Dual Core AMD Opteron(tm) Processor 270 stepping 02
[ 0.236014] Booting processor 2/2 ip 6000
[ 0.244015] Initializing CPU#2
[ 0.244015] Calibrating delay using timer specific routine.. 3989.44 BogoMIPS (lpj=7978899)
[ 0.244015] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.244015] CPU: L2 Cache: 1024K (64 bytes/line)
[ 0.244015] CPU 2/2 -> Node 0
[ 0.244015] CPU: Physical Processor ID: 1
[ 0.244015] CPU: Processor Core ID: 0
[ 0.323586] CPU2: Dual Core AMD Opteron(tm) Processor 270 stepping 02
[ 0.323992] Booting processor 3/3 ip 6000
[ 0.332020] Initializing CPU#3
[ 0.332020] Calibrating delay using timer specific routine.. 3989.46 BogoMIPS (lpj=7978939)
[ 0.332020] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.332020] CPU: L2 Cache: 1024K (64 bytes/line)
[ 0.332020] CPU 3/3 -> Node 0
[ 0.332020] CPU: Physical Processor ID: 1
[ 0.332020] CPU: Processor Core ID: 1
[ 0.411563] CPU3: Dual Core AMD Opteron(tm) Processor 270 stepping 02
[ 0.411870] Brought up 4 CPUs
[ 0.411903] Total of 4 processors activated (15960.42 BogoMIPS).
[ 0.412025] CPU0 attaching sched-domain:
[ 0.412025] domain 0: span 0-3
[ 0.412025] groups: 0 1 2 3
[ 0.412025] domain 1: span 0-3
[ 0.412025] groups: 0-3
[ 0.412025] CPU1 attaching sched-domain:
[ 0.412025] domain 0: span 0-3
[ 0.412025] groups: 1 2 3 0
[ 0.412025] domain 1: span 0-3
[ 0.412025] groups: 0-3
[ 0.412025] CPU2 attaching sched-domain:
[ 0.412025] domain 0: span 0-3
[ 0.412025] groups: 2 3 0 1
[ 0.412025] domain 1: span 0-3
[ 0.412025] groups: 0-3
[ 0.412025] CPU3 attaching sched-domain:
[ 0.412025] domain 0: span 0-3
[ 0.412025] groups: 3 0 1 2
[ 0.412025] domain 1: span 0-3
[ 0.412025] groups: 0-3
[ 0.412025] net_namespace: 1224 bytes
[ 0.412025] Booting paravirtualized kernel on bare hardware
[ 0.412025] NET: Registered protocol family 16
[ 0.412025] node 0 link 0: io port [2000, 2fff]
[ 0.412025] node 0 link 2: io port [1000, 1fff]
[ 0.412025] node 1 link 0: io port [e000, efff]
[ 0.412025] TOM: 0000000080000000 aka 2048M
[ 0.412025] node 0 link 0: mmio [a0000, bffff]
[ 0.412025] node 1 link 0: mmio [e8000000, efffffff]
[ 0.412025] node 0 link 0: mmio [febf0000, febfffff]
[ 0.412025] node 0 link 0: mmio [f0000000, fa1fffff]
[ 0.412025] node 0 link 2: mmio [fa200000, fa6fffff]
[ 0.412025] node 1 link 0: mmio [fa700000, fa7fffff]
[ 0.412025] bus: [00,3f] on node 0 link 0
[ 0.412025] bus: 00 index 0 io port: [2000, dfff]
[ 0.412025] bus: 00 index 1 io port: [0, fff]
[ 0.412025] bus: 00 index 2 io port: [f000, ffff]
[ 0.412025] bus: 00 index 3 mmio: [a0000, bffff]
[ 0.412025] bus: 00 index 4 mmio: [fa800000, fcffffffff]
[ 0.412025] bus: 00 index 5 mmio: [f0000000, fa1fffff]
[ 0.412025] bus: 00 index 6 mmio: [80000000, e7ffffff]
[ 0.412025] bus: [40,7f] on node 0 link 2
[ 0.412025] bus: 40 index 0 io port: [1000, 1fff]
[ 0.412025] bus: 40 index 1 mmio: [fa200000, fa6fffff]
[ 0.412025] bus: [80,ff] on node 1 link 0
[ 0.412025] bus: 80 index 0 io port: [e000, efff]
[ 0.412025] bus: 80 index 1 mmio: [e8000000, efffffff]
[ 0.412025] bus: 80 index 2 mmio: [fa700000, fa7fffff]
[ 0.412025] ACPI: bus type pci registered
[ 0.412025] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 63
[ 0.412025] PCI: Not using MMCONFIG.
[ 0.412025] PCI: Using configuration type 1 for base access
[ 0.415824] ACPI: EC: Look up EC in DSDT
[ 0.420182] ACPI: Interpreter enabled
[ 0.420216] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.420359] ACPI: Using IOAPIC for interrupt routing
[ 0.420443] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 63
[ 0.423053] PCI: BIOS Bug: MCFG area at e0000000 is not reserved in ACPI motherboard resources
[ 0.423098] PCI: Not using MMCONFIG.
[ 0.431353] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.431353] PCI: Transparent bridge - 0000:00:09.0
[ 0.431353] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.431353] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]
[ 0.431353] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXPA._PRT]
[ 0.442391] ACPI: PCI Root Bridge [PCI1] (0001:40)
[ 0.442908] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.GLMA._PRT]
[ 0.443049] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.GLMB._PRT]
[ 0.443353] ACPI: PCI Root Bridge [PCI2] (0002:80)
[ 0.447354] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
[ 0.447354] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
[ 0.447354] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *5
[ 0.447354] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *10
[ 0.447354] ACPI: PCI Interrupt Link [LNKW] (IRQs *48), disabled.
[ 0.447354] ACPI: PCI Interrupt Link [LNKX] (IRQs *49), disabled.
[ 0.447354] ACPI: PCI Interrupt Link [LNKY] (IRQs *50), disabled.
[ 0.447354] ACPI: PCI Interrupt Link [LNKZ] (IRQs *51), disabled.
[ 0.447354] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
[ 0.447354] ACPI: PCI Interrupt Link [LSB0] (IRQs 20 21 22 23) *5
[ 0.447354] ACPI: PCI Interrupt Link [LSB2] (IRQs 20 21 22 23) *10
[ 0.447769] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *11
[ 0.451354] ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *11
[ 0.451766] ACPI: PCI Interrupt Link [LMCI] (IRQs 20 21 22 23) *0, disabled.
[ 0.452200] ACPI: PCI Interrupt Link [LIDE] (IRQs 20 21 22 23) *0, disabled.
[ 0.452646] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5
[ 0.453069] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *10
[ 0.458526] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.458526] pnp: PnP ACPI init
[ 0.458526] ACPI: bus type pnp registered
[ 0.458526] pnp 00:00: parse allocated resources
[ 0.458526] pnp 00:00: add io 0xcf8-0xcff flags 0x1
[ 0.458526] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.458526] pnp 00:01: parse allocated resources
[ 0.458526] pnp 00:01: add io 0xf0-0xff flags 0x1
[ 0.458526] pnp 00:01: add irq 13 flags 0x1
[ 0.458526] pnp 00:01: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.458526] pnp 00:02: parse allocated resources
[ 0.458526] pnp 00:02: add io 0x0-0xf flags 0x1
[ 0.458526] pnp 00:02: add io 0x80-0x8f flags 0x1
[ 0.458526] pnp 00:02: add io 0xc0-0xdf flags 0x1
[ 0.458526] pnp 00:02: add dma 4 flags 0x2
[ 0.458526] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.458526] pnp 00:03: parse allocated resources
[ 0.458526] pnp 00:03: add io 0x70-0x71 flags 0x1
[ 0.458526] pnp 00:03: add irq 8 flags 0x1
[ 0.458526] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.458526] pnp 00:04: parse allocated resources
[ 0.458526] pnp 00:04: add io 0x61-0x61 flags 0x1
[ 0.458526] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.458526] pnp 00:05: parse allocated resources
[ 0.458526] pnp 00:05: add irq 12 flags 0x1
[ 0.458526] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 PNP0f0e (active)
[ 0.458526] pnp 00:06: parse allocated resources
[ 0.458526] pnp 00:06: add io 0x60-0x60 flags 0x1
[ 0.458526] pnp 00:06: add io 0x64-0x64 flags 0x1
[ 0.458526] pnp 00:06: add irq 1 flags 0x1
[ 0.458526] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.458526] pnp 00:07: parse allocated resources
[ 0.458526] pnp 00:07: add irq 4 flags 0x1
[ 0.458526] pnp 00:07: add io 0x3f8-0x3ff flags 0x1
[ 0.458526] pnp 00:07: parse resource options
[ 0.458526] pnp 00:07: new independent option
[ 0.458526] pnp 00:07: new dependent option (priority 0x1)
[ 0.458526] pnp 00:07: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000010 flags 0x1
[ 0.458533] pnp 00:07: io min 0x3f8 max 0x3f8 align 8 size 8 flags 0x1
[ 0.458536] pnp 00:07: new dependent option (priority 0x1)
[ 0.458541] pnp 00:07: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000008 flags 0x1
[ 0.458545] pnp 00:07: io min 0x2f8 max 0x2f8 align 8 size 8 flags 0x1
[ 0.458547] pnp 00:07: new dependent option (priority 0x1)
[ 0.458552] pnp 00:07: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000010 flags 0x1
[ 0.458555] pnp 00:07: io min 0x3e8 max 0x3e8 align 8 size 8 flags 0x1
[ 0.458558] pnp 00:07: new dependent option (priority 0x1)
[ 0.458562] pnp 00:07: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000008 flags 0x1
[ 0.458566] pnp 00:07: io min 0x2e8 max 0x2e8 align 8 size 8 flags 0x1
[ 0.458569] pnp 00:07: new dependent option (priority 0x2)
[ 0.458573] pnp 00:07: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,000004a8 flags 0x1
[ 0.458577] pnp 00:07: io min 0x3f8 max 0x3f8 align 8 size 8 flags 0x1
[ 0.458580] pnp 00:07: new dependent option (priority 0x2)
[ 0.458584] pnp 00:07: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,000004b0 flags 0x1
[ 0.458588] pnp 00:07: io min 0x2f8 max 0x2f8 align 8 size 8 flags 0x1
[ 0.458590] pnp 00:07: new dependent option (priority 0x2)
[ 0.458595] pnp 00:07: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,000004a8 flags 0x1
[ 0.458599] pnp 00:07: io min 0x3e8 max 0x3e8 align 8 size 8 flags 0x1
[ 0.458601] pnp 00:07: new dependent option (priority 0x2)
[ 0.458606] pnp 00:07: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,000004b0 flags 0x1
[ 0.458609] pnp 00:07: io min 0x2e8 max 0x2e8 align 8 size 8 flags 0x1
[ 0.458612] pnp 00:07: end dependent options
[ 0.462527] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active)
[ 0.462527] pnp 00:08: parse resource options
[ 0.462527] pnp 00:08: new independent option
[ 0.462527] pnp 00:08: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000040 flags 0x1
[ 0.462527] pnp 00:08: dma bitmask 0x4 flags 0x0
[ 0.462527] pnp 00:08: io min 0x3f0 max 0x3f0 align 1 size 6 flags 0x1
[ 0.462527] pnp 00:08: io min 0x3f7 max 0x3f7 align 1 size 1 flags 0x1
[ 0.462527] pnp 00:08: Plug and Play ACPI device, IDs PNP0700 (disabled)
[ 0.462527] pnp 00:09: parse allocated resources
[ 0.462527] pnp 00:09: add mem 0xfec00000-0xfec00fff flags 0x1
[ 0.462527] pnp 00:09: Plug and Play ACPI device, IDs PNP0003 (active)
[ 0.462527] pnp 00:0a: parse allocated resources
[ 0.462527] pnp 00:0a: add io 0x10-0x1f flags 0x1
[ 0.462527] pnp 00:0a: add io 0x50-0x53 flags 0x1
[ 0.462527] pnp 00:0a: add io 0x72-0x77 flags 0x1
[ 0.462527] pnp 00:0a: add io 0x90-0x9f flags 0x1
[ 0.462527] pnp 00:0a: add io 0x4d0-0x4d1 flags 0x1
[ 0.462527] pnp 00:0a: PNP0c02: calling quirk_system_pci_resources+0x0/0x15c
[ 0.462527] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.462527] pnp 00:0b: parse allocated resources
[ 0.462527] pnp 00:0b: add io 0x400-0x47f flags 0x1
[ 0.462527] pnp 00:0b: add io 0x480-0x48f flags 0x1
[ 0.462527] pnp 00:0b: add io 0xf800-0xf87f flags 0x1
[ 0.462527] pnp 00:0b: add io 0xf880-0xf8ff flags 0x1
[ 0.462527] pnp 00:0b: add io 0xf900-0xf97f flags 0x1
[ 0.462527] pnp 00:0b: add io 0xf980-0xf9ff flags 0x1
[ 0.462527] pnp 00:0b: add io 0xfa00-0xfa7f flags 0x1
[ 0.462527] pnp 00:0b: add io 0xfa80-0xfaff flags 0x1
[ 0.462527] pnp 00:0b: add io 0xfc00-0xfc7f flags 0x1
[ 0.462527] pnp 00:0b: add io 0xfc80-0xfcff flags 0x1
[ 0.462527] pnp 00:0b: add io 0xfe00-0xfe7f flags 0x1
[ 0.462527] pnp 00:0b: add io 0xfe80-0xfeff flags 0x1
[ 0.462527] pnp 00:0b: PNP0c02: calling quirk_system_pci_resources+0x0/0x15c
[ 0.462527] pnp 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.462527] pnp 00:0c: parse allocated resources
[ 0.462527] pnp 00:0c: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.462527] pnp 00:0d: parse allocated resources
[ 0.462527] pnp 00:0d: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.462527] pnp 00:0e: parse allocated resources
[ 0.462527] pnp 00:0e: add mem 0x0-0x9ffff flags 0x1
[ 0.462527] pnp 00:0e: add mem 0x100000-0x7fffffff flags 0x1
[ 0.462527] pnp 00:0e: add mem 0xe8000-0xfffff flags 0x1
[ 0.462527] pnp 00:0e: add mem 0xfec01000-0xffffffff flags 0x0
[ 0.462527] pnp 00:0e: add mem 0xd2c00-0xdffff flags 0x0
[ 0.462527] pnp 00:0e: PNP0c01: calling quirk_system_pci_resources+0x0/0x15c
[ 0.462527] pnp 00:0e: mem resource (0x0-0x9ffff) overlaps 0001:61:06.0 BAR 6 (0x0-0xfffff), disabling
[ 0.462576] pnp 00:0e: mem resource (0xe8000-0xfffff) overlaps 0001:61:06.0 BAR 6 (0x0-0xfffff), disabling
[ 0.462622] pnp 00:0e: mem resource (0xd2c00-0xdffff) overlaps 0001:61:06.0 BAR 6 (0x0-0xfffff), disabling
[ 0.462670] pnp 00:0e: mem resource (0x0-0x9ffff) overlaps 0001:61:06.1 BAR 6 (0x0-0xfffff), disabling
[ 0.462716] pnp 00:0e: mem resource (0xe8000-0xfffff) overlaps 0001:61:06.1 BAR 6 (0x0-0xfffff), disabling
[ 0.462762] pnp 00:0e: mem resource (0xd2c00-0xdffff) overlaps 0001:61:06.1 BAR 6 (0x0-0xfffff), disabling
[ 0.468824] pnp 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.468834] pnp: PnP ACPI: found 15 devices
[ 0.468866] ACPI: ACPI bus type pnp unregistered
[ 0.470265] usbcore: registered new interface driver usbfs
[ 0.470686] usbcore: registered new interface driver hub
[ 0.471103] usbcore: registered new device driver usb
[ 0.472328] PCI: Using ACPI for IRQ routing
[ 0.492329] ACPI: RTC can wake from S4
[ 0.508114] pnp: the driver 'system' has been registered
[ 0.508128] system 00:0a: ioport range 0x4d0-0x4d1 has been reserved
[ 0.508164] system 00:0a: driver attached
[ 0.508170] system 00:0b: ioport range 0x400-0x47f has been reserved
[ 0.508205] system 00:0b: ioport range 0x480-0x48f has been reserved
[ 0.508241] system 00:0b: ioport range 0xf800-0xf87f has been reserved
[ 0.508277] system 00:0b: ioport range 0xf880-0xf8ff has been reserved
[ 0.508313] system 00:0b: ioport range 0xf900-0xf97f has been reserved
[ 0.508330] system 00:0b: ioport range 0xf980-0xf9ff has been reserved
[ 0.508330] system 00:0b: ioport range 0xfa00-0xfa7f has been reserved
[ 0.508330] system 00:0b: ioport range 0xfa80-0xfaff has been reserved
[ 0.508330] system 00:0b: ioport range 0xfc00-0xfc7f has been reserved
[ 0.508330] system 00:0b: ioport range 0xfc80-0xfcff has been reserved
[ 0.508330] system 00:0b: ioport range 0xfe00-0xfe7f has been reserved
[ 0.508330] system 00:0b: ioport range 0xfe80-0xfeff has been reserved
[ 0.508330] system 00:0b: driver attached
[ 0.508330] system 00:0e: iomem range 0x100000-0x7fffffff could not be reserved
[ 0.508330] system 00:0e: iomem range 0xfec01000-0xffffffff could not be reserved
[ 0.508330] system 00:0e: driver attached
[ 0.508330] PCI: Bridge: 0000:00:09.0
[ 0.508330] IO window: disabled.
[ 0.508330] MEM window: 0xfa000000-0xfa0fffff
[ 0.508330] PREFETCH window: disabled.
[ 0.508330] PCI: Failed to allocate mem resource #6:20000@f8000000 for 0000:0a:00.0
[ 0.508330] PCI: Bridge: 0000:00:0e.0
[ 0.508330] IO window: disabled.
[ 0.508330] MEM window: 0xf8000000-0xf9ffffff
[ 0.508330] PREFETCH window: 0x00000000f0000000-0x00000000f7ffffff
[ 0.508330] PCI: Setting latency timer of device 0000:00:09.0 to 64
[ 0.508330] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[ 0.508330] PCI: Failed to allocate mem resource #9:200000@fa700000 for 0001:40:02.0
[ 0.508330] PCI: Bridge: 0001:40:01.0
[ 0.508330] IO window: disabled.
[ 0.508330] MEM window: disabled.
[ 0.508330] PREFETCH window: disabled.
[ 0.508330] PCI: Failed to allocate mem resource #6:100000@fa600000 for 0001:61:06.0
[ 0.508330] PCI: Failed to allocate mem resource #6:100000@fa600000 for 0001:61:06.1
[ 0.508330] PCI: Bridge: 0001:40:02.0
[ 0.508330] IO window: 1000-1fff
[ 0.508330] MEM window: 0xfa200000-0xfa5fffff
[ 0.508330] PREFETCH window: disabled.
[ 0.508330] NET: Registered protocol family 2
[ 0.510343] Switched to high resolution mode on CPU 0
[ 0.515387] Switched to high resolution mode on CPU 1
[ 0.515393] Switched to high resolution mode on CPU 2
[ 0.515682] Switched to high resolution mode on CPU 3
[ 0.556995] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.558209] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.561160] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.561873] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.561910] TCP reno registered
[ 0.576995] NET: Registered protocol family 1
[ 0.577154] checking if image is initramfs... it is
[ 1.350843] Freeing initrd memory: 10112k freed
[ 1.359411] audit: initializing netlink socket (disabled)
[ 1.359411] type=2000 audit(1251922510.336:1): initialized
[ 1.359411] Total HugeTLB memory allocated, 0
[ 1.359411] VFS: Disk quotas dquot_6.5.1
[ 1.359411] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.359411] msgmni has been set to 4029
[ 1.359411] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.359411] io scheduler noop registered
[ 1.359411] io scheduler anticipatory registered
[ 1.359411] io scheduler deadline registered
[ 1.359411] io scheduler cfq registered (default)
[ 1.359411] pci 0000:00:00.0: Enabling HT MSI Mapping
[ 1.359411] pci 0000:00:0e.0: Enabling HT MSI Mapping
[ 1.359411] pci 0000:00:0e.0: Found enabled HT MSI Mapping
[ 1.359411] pci 0000:0a:00.0: Boot video device
[ 1.359411] pci 0001:40:01.0: MSI quirk detected; subordinate MSI disabled
[ 1.359411] pci 0001:40:01.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC
[ 1.359411] pci 0001:40:02.0: MSI quirk detected; subordinate MSI disabled
[ 1.359411] pci 0001:40:02.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC
[ 1.360876] pci 0002:80:00.0: Enabling HT MSI Mapping
[ 1.363043] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[ 1.363063] assign_interrupt_mode Found MSI capability
[ 1.363117] Allocate Port Service[0000:00:0e.0:pcie00]
[ 1.371349] Linux agpgart interface v0.103
[ 1.371349] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 1.371349] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.371349] pnp: the driver 'serial' has been registered
[ 1.371349] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.371349] serial 00:07: driver attached
[ 1.373403] brd: module loaded
[ 1.375353] input: Macintosh mouse button emulation as /class/input/input0
[ 1.375353] pnp: the driver 'i8042 kbd' has been registered
[ 1.375353] i8042 kbd 00:06: driver attached
[ 1.375353] pnp: the driver 'i8042 aux' has been registered
[ 1.375353] i8042 aux 00:05: driver attached
[ 1.375353] PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
[ 1.378298] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.378298] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.394454] mice: PS/2 mouse device common for all mice
[ 1.394454] pnp: the driver 'rtc_cmos' has been registered
[ 1.394454] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.394454] rtc0: alarms up to one year, y3k
[ 1.394454] rtc_cmos 00:03: driver attached
[ 1.394454] cpuidle: using governor ladder
[ 1.394454] cpuidle: using governor menu
[ 1.394454] No iBFT detected.
[ 1.394454] TCP cubic registered
[ 1.394454] NET: Registered protocol family 17
[ 1.394454] registered taskstats version 1
[ 1.394454] rtc_cmos 00:03: setting system clock to 2009-09-02 20:15:11 UTC (1251922511)
[ 1.394454] Freeing unused kernel memory: 392k freed
[ 1.423642] input: AT Translated Set 2 keyboard as /class/input/input1
[ 1.490088] SCSI subsystem initialized
[ 1.493460] Fusion MPT base driver 3.04.06
[ 1.493460] Copyright (c) 1999-2007 LSI Corporation
[ 1.502676] Driver 'sd' needs updating - please use bus_type methods
[ 1.506750] device-mapper: uevent: version 1.0.3
[ 1.506750] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
[ 1.535360] ACPI: ACPI0007:00 is registered as cooling_device0
[ 1.535360] ACPI: ACPI0007:01 is registered as cooling_device1
[ 1.535360] ACPI: ACPI0007:02 is registered as cooling_device2
[ 1.538089] ACPI: ACPI0007:03 is registered as cooling_device3
[ 1.647294] ACPI: PCI Interrupt Link [LSB2] enabled at IRQ 23
[ 1.647294] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LSB2] -> GSI 23 (level, high) -> IRQ 23
[ 1.647294] PCI: Setting latency timer of device 0000:00:02.1 to 64
[ 1.647294] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 1.647294] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 1.647294] ehci_hcd 0000:00:02.1: debug port 1
[ 1.647294] PCI: cache line size of 64 is not supported by device 0000:00:02.1
[ 1.647294] ehci_hcd 0000:00:02.1: irq 23, io mem 0xfebf0000
[ 1.655421] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 1.657453] usb usb1: configuration #1 chosen from 1 choice
[ 1.657539] hub 1-0:1.0: USB hub found
[ 1.657583] hub 1-0:1.0: 10 ports detected
[ 1.667323] Uniform Multi-Platform E-IDE driver
[ 1.667323] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 1.671325] No dock devices found.
[ 1.695333] libata version 3.00 loaded.
[ 1.700748] Fusion MPT SPI Host driver 3.04.06
[ 1.766413] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.766456] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.766501] usb usb1: Product: EHCI Host Controller
[ 1.766536] usb usb1: Manufacturer: Linux 2.6.26-2-amd64 ehci_hcd
[ 1.766572] usb usb1: SerialNumber: 0000:00:02.1
[ 1.767335] NFORCE-CK804: 0000:00:06.0 (rev f2) UDMA133 controller
[ 1.767335] NFORCE-CK804: IDE controller (0x10de:0x0053 rev 0xf2) at PCI slot 0000:00:06.0
[ 1.767335] NFORCE-CK804: not 100% native mode: will probe irqs later
[ 1.767335] ide0: BM-DMA at 0x28a0-0x28a7
[ 1.767335] ide1: BM-DMA at 0x28a8-0x28af
[ 1.767335] Probing IDE interface ide0...
[ 2.504375] hda: HL-DT-ST RW/DVD GCC-4482B, ATAPI CD/DVD-ROM drive
[ 3.296160] hdb: _NEC DVD_RW ND-3500AG, ATAPI CD/DVD-ROM drive
[ 3.347714] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 3.347814] hda: UDMA/44 mode selected
[ 3.348031] hdb: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 3.348120] hdb: UDMA/33 mode selected
[ 3.352158] Probing IDE interface ide1...
[ 3.920177] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 3.933230] ide1 at 0x170-0x177,0x376 on irq 15
[ 3.935895] sata_nv 0000:00:07.0: version 3.5
[ 3.935895] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 22
[ 3.935895] ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [LSA0] -> GSI 22 (level, high) -> IRQ 22
[ 3.935895] PCI: Setting latency timer of device 0000:00:07.0 to 64
[ 3.935895] scsi0 : sata_nv
[ 3.935895] scsi1 : sata_nv
[ 3.935895] ata1: SATA max UDMA/133 cmd 0x28d0 ctl 0x28f8 bmdma 0x28b0 irq 22
[ 3.935895] ata2: SATA max UDMA/133 cmd 0x28d8 ctl 0x28fc bmdma 0x28b8 irq 22
[ 4.438154] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.458295] ata1.00: ATA-6: WDC WD740GD-50FLC0, 33.08F33, max UDMA/133
[ 4.458295] ata1.00: 145226112 sectors, multi 16: LBA48
[ 4.475474] ata1.00: configured for UDMA/133
[ 4.830274] ata2: SATA link down (SStatus 0 SControl 300)
[ 4.830288] isa bounce pool size: 16 pages
[ 4.830288] scsi 0:0:0:0: Direct-Access ATA WDC WD740GD-50FL 33.0 PQ: 0 ANSI: 5
[ 4.830288] sd 0:0:0:0: [sda] 145226112 512-byte hardware sectors (74356 MB)
[ 4.830288] sd 0:0:0:0: [sda] Write Protect is off
[ 4.830288] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.830288] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.834286] sd 0:0:0:0: [sda] 145226112 512-byte hardware sectors (74356 MB)
[ 4.834286] sd 0:0:0:0: [sda] Write Protect is off
[ 4.834286] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.834286] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.834286] sda: sda1 sda2 sda3 < sda5 sda6 >
[ 4.864578] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.864578] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 21
[ 4.864578] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LSA1] -> GSI 21 (level, high) -> IRQ 21
[ 4.864578] PCI: Setting latency timer of device 0000:00:08.0 to 64
[ 4.864578] scsi2 : sata_nv
[ 4.864578] scsi3 : sata_nv
[ 4.864578] ata3: SATA max UDMA/133 cmd 0x28e0 ctl 0x2c00 bmdma 0x28c0 irq 21
[ 4.864578] ata4: SATA max UDMA/133 cmd 0x28e8 ctl 0x2c04 bmdma 0x28c8 irq 21
[ 5.376459] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 5.400525] ata3.00: ATA-6: WD My Book 1105, 1010, max UDMA/133
[ 5.400562] ata3.00: 976756784 sectors, multi 0: LBA48
[ 5.460695] ata3.00: configured for UDMA/133
[ 5.796604] ata4: SATA link down (SStatus 0 SControl 300)
[ 5.796601] scsi 2:0:0:0: Direct-Access ATA WD My Book 1010 PQ: 0 ANSI: 5
[ 5.796601] sd 2:0:0:0: [sdb] 976756784 512-byte hardware sectors (500099 MB)
[ 5.796601] sd 2:0:0:0: [sdb] Write Protect is off
[ 5.796601] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 5.796601] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.796601] sd 2:0:0:0: [sdb] 976756784 512-byte hardware sectors (500099 MB)
[ 5.796601] sd 2:0:0:0: [sdb] Write Protect is off
[ 5.796601] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 5.796601] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.796601] sdb: sdb1
[ 5.797033] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 5.800582] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
[ 5.800582] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20
[ 5.800582] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LMAC] -> GSI 20 (level, high) -> IRQ 20
[ 5.800582] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[ 6.357025] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:17:a4:99:11:d0
[ 6.357073] forcedeth 0000:00:0a.0: highdma csum timirq gbit lnktim desc-v3
[ 6.372579] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 19
[ 6.372579] ACPI: PCI Interrupt 0000:05:05.0[A] -> Link [LNKD] -> GSI 19 (level, high) -> IRQ 19
[ 6.436577] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[fa004000-fa0047ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 6.436800] ACPI: PCI Interrupt 0001:61:06.0[A] -> GSI 30 (level, low) -> IRQ 30
[ 6.436952] mptbase: ioc0: Initiating bringup
[ 6.441377] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 6.441377] ACPI: PCI Interrupt Link [LSB0] enabled at IRQ 23
[ 6.441377] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LSB0] -> GSI 23 (level, high) -> IRQ 23
[ 6.441377] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 6.441377] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 6.441377] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[ 6.441377] ohci_hcd 0000:00:02.0: irq 23, io mem 0xfa100000
[ 6.441377] udev: renamed network interface eth0 to eth1
[ 6.498624] usb usb2: configuration #1 chosen from 1 choice
[ 6.498697] hub 2-0:1.0: USB hub found
[ 6.498739] hub 2-0:1.0: 10 ports detected
[ 6.608319] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 6.608356] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.608399] usb usb2: Product: OHCI Host Controller
[ 6.608432] usb usb2: Manufacturer: Linux 2.6.26-2-amd64 ohci_hcd
[ 6.608466] usb usb2: SerialNumber: 0000:00:02.0
[ 6.975714] ioc0: LSI53C1030 B2: Capabilities={Initiator,Target}
[ 7.327135] scsi4 : ioc0: LSI53C1030 B2, FwRev=01032700h, Ports=1, MaxQ=255, IRQ=30
[ 7.889178] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0060b000001d0334]
[ 8.327788] ACPI: PCI Interrupt 0001:61:06.1[B] -> GSI 31 (level, low) -> IRQ 31
[ 8.327788] mptbase: ioc1: Initiating bringup
[ 8.327788] target4:0:0: mptspi: ioc0: mpt_config failed
[ 8.997385] ioc1: LSI53C1030 B2: Capabilities={Initiator,Target}
[ 9.407332] scsi5 : ioc1: LSI53C1030 B2, FwRev=01032700h, Ports=1, MaxQ=255, IRQ=31
[ 9.443718] scsi 4:0:0:0: Direct-Access CSC 73GB 10K REFURBISHED 0102 PQ: 0 ANSI: 3
[ 9.443780] target4:0:0: Beginning Domain Validation
[ 9.466340] target4:0:0: Ending Domain Validation
[ 9.466436] target4:0:0: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS RTI WRFLOW PCOMP (6.25 ns, offset 63)
[ 10.502039] hda: ATAPI 48X DVD-ROM CD-R/RW drive, 1536kB Cache
[ 10.502039] Uniform CD-ROM driver Revision: 3.20
[ 10.502039] hdb: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
[ 10.929463] PM: Starting manual resume from disk
[ 10.935683] ReiserFS: sda2: found reiserfs format "3.6" with standard journal
[ 10.935683] ReiserFS: sda2: using ordered data mode
[ 10.944653] ReiserFS: sda2: journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 10.945953] ReiserFS: sda2: checking transaction log (sda2)
[ 10.966090] ReiserFS: sda2: Using r5 hash to sort names
[ 12.459908] udev: starting version 141
[ 12.459908] udev: deprecated sysfs layout; update the kernel or disable CONFIG_SYSFS_DEPRECATED; some udev features will not work correctly
[ 12.884038] input: Power Button (FF) as /class/input/input2
[ 12.938854] input: PC Speaker as /class/input/input3
[ 12.957600] ACPI: Power Button (FF) [PWRF]
[ 12.957753] input: Power Button (CM) as /class/input/input4
[ 12.996577] ACPI: Power Button (CM) [PBTN]
[ 13.249220] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 13.258656] shpchp: HPC vendor_id 1022 device_id 7450 ss_vid 0 ss_did 0
[ 13.258656] shpchp: shpc_init: cannot reserve MMIO region
[ 13.258656] shpchp: HPC vendor_id 1022 device_id 7450 ss_vid 0 ss_did 0
[ 13.258656] shpchp: shpc_init: cannot reserve MMIO region
[ 13.258656] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 13.355487] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x2800
[ 13.355487] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x2840
[ 13.661459] input: ImPS/2 Generic Wheel Mouse as /class/input/input5
[ 13.670369] sd 4:0:0:0: [sdc] 143374744 512-byte hardware sectors (73408 MB)
[ 13.674099] sd 4:0:0:0: [sdc] Write Protect is off
[ 13.674099] sd 4:0:0:0: [sdc] Mode Sense: ab 00 10 08
[ 13.674099] sd 4:0:0:0: [sdc] Write cache: disabled, read cache: enabled, supports DPO and FUA
[ 13.674099] sd 4:0:0:0: [sdc] 143374744 512-byte hardware sectors (73408 MB)
[ 13.675277] sd 4:0:0:0: [sdc] Write Protect is off
[ 13.675313] sd 4:0:0:0: [sdc] Mode Sense: ab 00 10 08
[ 13.680140] sd 4:0:0:0: [sdc] Write cache: disabled, read cache: enabled, supports DPO and FUA
[ 13.680187] sdc: sdc8 sdc9 sdc11
[ 13.687258] sd 4:0:0:0: [sdc] Attached SCSI disk
[ 13.736408] ACPI: PCI Interrupt Link [LACI] enabled at IRQ 22
[ 13.736451] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [LACI] -> GSI 22 (level, high) -> IRQ 22
[ 13.736566] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 14.814351] Adding 2345448k swap on /dev/sda5. Priority:-1 extents:1 across:2345448k
[ 15.108817] loop: module loaded
[ 15.359595] fuse init (API version 7.9)
[ 15.444522] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 15.455082] SGI XFS Quota Management subsystem
[ 15.467082] XFS mounting filesystem sdc8
[ 15.507083] Ending clean XFS mount for filesystem: sdc8
[ 15.940819] XFS mounting filesystem sdb1
[ 16.345289] Ending clean XFS mount for filesystem: sdb1
[ 17.342004] RPC: Registered udp transport module.
[ 17.342004] RPC: Registered tcp transport module.
[ 17.493225] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 18.550444] NET: Registered protocol family 10
[ 18.550684] lo: Disabled Privacy Extensions
[ 19.231214] powernow-k8: Found 1 Dual Core AMD Opteron(tm) Processor 270 processors (4 cpu cores) (version 2.20.00)
[ 19.231214] powernow-k8: ACPI Processor support is required for SMP systems but is absent. Please load the ACPI Processor module before starting this driver.
[ 19.231214] powernow-k8: ACPI Processor support is required for SMP systems but is absent. Please load the ACPI Processor module before starting this driver.
[ 19.231214] powernow-k8: ACPI Processor support is required for SMP systems but is absent. Please load the ACPI Processor module before starting this driver.
[ 19.232182] powernow-k8: ACPI Processor support is required for SMP systems but is absent. Please load the ACPI Processor module before starting this driver.
[ 21.447493] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 21.447747] NFSD: starting 90-second grace period
[ 23.143952] lp: driver loaded but no devices found
[ 23.156931] ppdev: user-space parallel port driver
[ 26.083312] nvidia: module license 'NVIDIA' taints kernel.
[ 26.350900] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 18
[ 26.350900] ACPI: PCI Interrupt 0000:0a:00.0[A] -> Link [LNKC] -> GSI 18 (level, high) -> IRQ 18
[ 26.350900] PCI: Setting latency timer of device 0000:0a:00.0 to 64
[ 26.350900] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 185.18.31 Tue Jul 28 17:52:27 PDT 2009
[ 30.564858] eth1: no IPv6 routers present
0000:00:00.0 0580: 10de:005e (rev a3)
0000:00:01.0 0601: 10de:0051 (rev a3)
0000:00:01.1 0c05: 10de:0052 (rev a2)
0000:00:02.0 0c03: 10de:005a (rev a2)
0000:00:02.1 0c03: 10de:005b (rev a3)
0000:00:04.0 0401: 10de:0059 (rev a2)
0000:00:06.0 0101: 10de:0053 (rev f2)
0000:00:07.0 0101: 10de:0054 (rev f3)
0000:00:08.0 0101: 10de:0055 (rev f3)
0000:00:09.0 0604: 10de:005c (rev a2)
0000:00:0a.0 0680: 10de:0057 (rev a3)
0000:00:0e.0 0604: 10de:005d (rev a3)
0000:00:18.0 0600: 1022:1100
0000:00:18.1 0600: 1022:1101
0000:00:18.2 0600: 1022:1102
0000:00:18.3 0600: 1022:1103
0000:00:19.0 0600: 1022:1100
0000:00:19.1 0600: 1022:1101
0000:00:19.2 0600: 1022:1102
0000:00:19.3 0600: 1022:1103
0000:05:05.0 0c00: 104c:8023
0000:0a:00.0 0300: 10de:00ce (rev a2)
0001:40:01.0 0604: 1022:7450 (rev 12)
0001:40:01.1 0800: 1022:7451 (rev 01)
0001:40:02.0 0604: 1022:7450 (rev 12)
0001:40:02.1 0800: 1022:7451 (rev 01)
0001:61:06.0 0100: 1000:0030 (rev 07)
0001:61:06.1 0100: 1000:0030 (rev 07)
0002:80:00.0 0580: 10de:005e (rev a3)
0002:80:01.0 0580: 10de:00d3 (rev a3)
0000:00:00.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev a3)
Subsystem: Hewlett-Packard Company Device 1500
Flags: bus master, 66MHz, fast devsel, latency 0
Capabilities: [44] HyperTransport: Slave or Primary Interface
Capabilities: [e0] HyperTransport: MSI Mapping Enable+ Fixed-
0000:00:01.0 ISA bridge: nVidia Corporation CK804 ISA Bridge (rev a3)
Subsystem: Hewlett-Packard Company Device 1500
Flags: bus master, 66MHz, fast devsel, latency 0
I/O ports at <ignored>
0000:00:01.1 SMBus: nVidia Corporation CK804 SMBus (rev a2)
Subsystem: Hewlett-Packard Company Device 1500
Flags: 66MHz, fast devsel, IRQ 11
I/O ports at 2880 [size=32]
I/O ports at 2800 [size=64]
I/O ports at 2840 [size=64]
Capabilities: [44] Power Management version 2
Kernel driver in use: nForce2_smbus
0000:00:02.0 USB Controller: nVidia Corporation CK804 USB Controller (rev a2) (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Device 1500
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23
Memory at fa100000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Kernel driver in use: ohci_hcd
0000:00:02.1 USB Controller: nVidia Corporation CK804 USB Controller (rev a3) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device 1500
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23
Memory at febf0000 (32-bit, non-prefetchable) [size=256]
Capabilities: [44] Debug port: BAR=1 offset=0098
Capabilities: [80] Power Management version 2
Kernel driver in use: ehci_hcd
0000:00:04.0 Multimedia audio controller: nVidia Corporation CK804 AC'97 Audio Controller (rev a2)
Subsystem: Hewlett-Packard Company Device 1500
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22
I/O ports at 2000 [size=256]
I/O ports at 2400 [size=256]
Memory at fa101000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Kernel driver in use: Intel ICH
0000:00:06.0 IDE interface: nVidia Corporation CK804 IDE (rev f2) (prog-if 8a [Master SecP PriP])
Subsystem: Hewlett-Packard Company Device 1500
Flags: bus master, 66MHz, fast devsel, latency 0
[virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
[virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
[virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
[virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
I/O ports at 28a0 [size=16]
Capabilities: [44] Power Management version 2
Kernel driver in use: AMD_IDE
0000:00:07.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev f3) (prog-if 85 [Master SecO PriO])
Subsystem: Hewlett-Packard Company Device 1500
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22
I/O ports at 28d0 [size=8]
I/O ports at 28f8 [size=4]
I/O ports at 28d8 [size=8]
I/O ports at 28fc [size=4]
I/O ports at 28b0 [size=16]
Memory at fa102000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Kernel driver in use: sata_nv
0000:00:08.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev f3) (prog-if 85 [Master SecO PriO])
Subsystem: Hewlett-Packard Company Device 1500
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21
I/O ports at 28e0 [size=8]
I/O ports at 2c00 [size=4]
I/O ports at 28e8 [size=8]
I/O ports at 2c04 [size=4]
I/O ports at 28c0 [size=16]
Memory at fa103000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Kernel driver in use: sata_nv
0000:00:09.0 PCI bridge: nVidia Corporation CK804 PCI Bridge (rev a2) (prog-if 01 [Subtractive decode])
Flags: bus master, 66MHz, fast devsel, latency 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=64
Memory behind bridge: fa000000-fa0fffff
0000:00:0a.0 Bridge: nVidia Corporation CK804 Ethernet Controller (rev a3)
Subsystem: Hewlett-Packard Company Device 1500
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20
Memory at fa104000 (32-bit, non-prefetchable) [size=4K]
I/O ports at 28f0 [size=8]
Capabilities: [44] Power Management version 2
Kernel driver in use: forcedeth
0000:00:0e.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=0a, subordinate=0a, sec-latency=0
Memory behind bridge: f8000000-f9ffffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f7ffffff
Capabilities: [40] Power Management version 2
Capabilities: [48] MSI: Enable+ Count=1/2 Maskable- 64bit+
Capabilities: [58] HyperTransport: MSI Mapping Enable+ Fixed-
Capabilities: [80] Express Root Port (Slot+), MSI 00
Kernel driver in use: pcieport-driver
0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
Flags: fast devsel
Capabilities: [80] HyperTransport: Host or Secondary Interface
Capabilities: [a0] HyperTransport: Host or Secondary Interface
Capabilities: [c0] HyperTransport: Host or Secondary Interface
0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
Flags: fast devsel
0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
Flags: fast devsel
0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
Flags: fast devsel
Kernel driver in use: k8temp
0000:00:19.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
Flags: fast devsel
Capabilities: [80] HyperTransport: Host or Secondary Interface
Capabilities: [a0] HyperTransport: Host or Secondary Interface
Capabilities: [c0] HyperTransport: Host or Secondary Interface
0000:00:19.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
Flags: fast devsel
0000:00:19.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
Flags: fast devsel
0000:00:19.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
Flags: fast devsel
Kernel driver in use: k8temp
0000:05:05.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Device 1500
Flags: bus master, medium devsel, latency 66, IRQ 19
Memory at fa004000 (32-bit, non-prefetchable) [size=2K]
Memory at fa000000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 2
Kernel driver in use: ohci1394
0000:0a:00.0 VGA compatible controller: nVidia Corporation NV41GL [Quadro FX 1400] (rev a2) (prog-if 00 [VGA controller])
Subsystem: nVidia Corporation Device 0243
Flags: bus master, fast devsel, latency 0, IRQ 18
Memory at f8000000 (32-bit, non-prefetchable) [size=16M]
Memory at f0000000 (64-bit, prefetchable) [size=128M]
Memory at f9000000 (64-bit, non-prefetchable) [size=16M]
Expansion ROM at <unassigned> [disabled]
Capabilities: [60] Power Management version 2
Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [78] Express Endpoint, MSI 00
Kernel driver in use: nvidia
0001:40:01.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge (rev 12) (prog-if 00 [Normal decode])
Flags: bus master, 66MHz, medium devsel, latency 66
Bus: primary=40, secondary=41, subordinate=41, sec-latency=64
Capabilities: [a0] PCI-X bridge device
Capabilities: [b8] HyperTransport: Interrupt Discovery and Configuration
Capabilities: [c0] HyperTransport: Slave or Primary Interface
0001:40:01.1 PIC: Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC (rev 01) (prog-if 10 [IO-APIC])
Subsystem: Advanced Micro Devices [AMD] Device 7450
Flags: bus master, medium devsel, latency 0
Memory at fa600000 (64-bit, non-prefetchable) [size=4K]
0001:40:02.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge (rev 12) (prog-if 00 [Normal decode])
Flags: bus master, 66MHz, medium devsel, latency 66
Bus: primary=40, secondary=61, subordinate=61, sec-latency=64
I/O behind bridge: 00001000-00001fff
Memory behind bridge: fa200000-fa5fffff
Capabilities: [a0] PCI-X bridge device
Capabilities: [b8] HyperTransport: Interrupt Discovery and Configuration
0001:40:02.1 PIC: Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC (rev 01) (prog-if 10 [IO-APIC])
Subsystem: Advanced Micro Devices [AMD] Device 7450
Flags: bus master, medium devsel, latency 0
Memory at fa601000 (64-bit, non-prefetchable) [size=4K]
0001:61:06.0 SCSI storage controller: LSI Logic / Symbios Logic 53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI (rev 07)
Subsystem: Hewlett-Packard Company Device 1500
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 30
I/O ports at 1000 [size=256]
Memory at fa200000 (64-bit, non-prefetchable) [size=1M]
Memory at fa300000 (64-bit, non-prefetchable) [size=1M]
Capabilities: [50] Power Management version 2
Capabilities: [58] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [68] PCI-X non-bridge device
Kernel driver in use: mptspi
0001:61:06.1 SCSI storage controller: LSI Logic / Symbios Logic 53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI (rev 07)
Subsystem: Hewlett-Packard Company Device 1500
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 31
I/O ports at 1400 [size=256]
Memory at fa400000 (64-bit, non-prefetchable) [size=1M]
Memory at fa500000 (64-bit, non-prefetchable) [size=1M]
Capabilities: [50] Power Management version 2
Capabilities: [58] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [68] PCI-X non-bridge device
Kernel driver in use: mptspi
0002:80:00.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev a3)
Subsystem: Hewlett-Packard Company Device 1500
Flags: bus master, 66MHz, fast devsel, latency 0
Capabilities: [44] HyperTransport: Slave or Primary Interface
Capabilities: [e0] HyperTransport: MSI Mapping Enable+ Fixed-
0002:80:01.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev a3)
Subsystem: Hewlett-Packard Company Device 1500
Flags: bus master, 66MHz, fast devsel, latency 0
I/O ports at <ignored>
Memory at fa700000 (32-bit, non-prefetchable) [size=4K]
Reply to: