[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#478042: marked as done (linux-image-2.6.24-1-686: Cisco Aironet does not work anymore)



Your message dated Wed, 2 Sep 2009 19:27:00 +0200
with message-id <20090902172700.GA12075@inutil.org>
and subject line Re: Bug#478042: linux-image-2.6.24-1-686: Cisco Aironet does not work anymore
has caused the Debian Bug report #478042,
regarding linux-image-2.6.24-1-686: Cisco Aironet does not work anymore
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
478042: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=478042
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message ---
Package: linux-image-2.6.24-1-686
Version: 2.6.24-6
Severity: normal

My Cisco Aironet does no longer work since 2.6.24, while it worked with
2.6.23, and newer releases of 2.6.24 do not fix the problem.

-- Package-specific info:
** Version:
Linux version 2.6.24-1-686 (Debian 2.6.24-6) (waldi@debian.org) (gcc version 4.1.3 20080308 (prerelease) (Debian 4.1.2-21)) #1 SMP Sat Apr 19 00:37:55 UTC 2008

** Command line:
root=/dev/hda4 ro resume=/dev/hda3 quiet vga=792

** Not tainted

** Kernel log:
input: Lid Switch as /class/input/input2
ACPI: Lid Switch [LID]
input: Sleep Button (CM) as /class/input/input3
ACPI: Sleep Button (CM) [SLPB]
PCI: Enabling device 0000:00:1f.5 (0000 -> 0001)
ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1f.5 to 64
input: PC Speaker as /class/input/input4
input: Video Bus as /class/input/input5
ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
ACPI: AC Adapter [AC] (on-line)
Real Time Clock Driver v1.12ac
intel8x0_measure_ac97_clock: measured 58488 usecs
intel8x0: clocking to 48000
Yenta: CardBus bridge found at 0000:02:00.0 [1014:023b]
Yenta: Using INTVAL to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:02:00.0, mfunc 0x01d21022, devctl 0x64
ACPI: Battery Slot [BAT0] (battery present)
Yenta: ISA IRQ mask 0x04b8, PCI irq 11
Socket status: 30000006
pcmcia: parent PCI bridge I/O window: 0x2000 - 0x6fff
cs: IO port probe 0x2000-0x6fff: clean.
pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xcfffffff
pcmcia: parent PCI bridge Memory window: 0xf0000000 - 0xf7ffffff
Yenta: CardBus bridge found at 0000:02:00.1 [1014:023b]
Yenta: Using INTVAL to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:02:00.1, mfunc 0x01d21022, devctl 0x64
Yenta: ISA IRQ mask 0x04b8, PCI irq 11
Socket status: 30000010
pcmcia: parent PCI bridge I/O window: 0x2000 - 0x6fff
cs: IO port probe 0x2000-0x6fff: clean.
pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xcfffffff
pcmcia: parent PCI bridge Memory window: 0xf0000000 - 0xf7ffffff
IBM TrackPoint firmware: 0x0e, buttons: 3/3
input: TPPS/2 IBM TrackPoint as /class/input/input6
parport_pc 00:0b: reported by Plug and Play ACPI
parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
irda_init()
NET: Registered protocol family 23
nsc-ircc 00:0c: activated
nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 1.
nsc-ircc, chip->init
nsc-ircc, Found chip at base=0x02e
nsc-ircc, driver loaded (Dag Brattli)
IrDA: Registered device irda0
nsc-ircc, Using dongle: IBM31T1100 or Temic TFDS6000/TFDS6500
pccard: PCMCIA card inserted into slot 1
cs: memory probe 0xf0000000-0xf7ffffff: excluding 0xf0000000-0xf7ffffff
cs: memory probe 0xc0200000-0xcfffffff: excluding 0xc0200000-0xc11fffff 0xc1a00000-0xc21fffff 0xc2a00000-0xc31fffff 0xc3a00000-0xcc1fffff 0xcca00000-0xcd1fffff 0xcda00000-0xce1fffff 0xcea00000-0xcf1fffff 0xcfa00000-0xd01fffff
pcmcia: registering new device pcmcia1.0
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
cs: IO port probe 0xa00-0xaff: clean.
airo(): Probing for PCI adapters
airo(): Finished probing for PCI adapters
airo(): cmd:111 status:7f11 rsp0:2 rsp1:0 rsp2:0
airo(): Doing fast bap_reads
Adding 249472k swap on /dev/hda3.  Priority:-1 extents:1 across:249472k
EXT3 FS on hda4, internal journal
Non-volatile memory driver v1.2
thinkpad_acpi: ThinkPad ACPI Extras v0.17
thinkpad_acpi: http://ibm-acpi.sf.net/
thinkpad_acpi: ThinkPad BIOS 1AET64WW (1.20 ), EC 1AHT23WW-1.06a
input: ThinkPad Extra Buttons as /class/input/input7
[drm] Initialized drm 1.1.0 20060810
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[drm] Initialized savage 2.4.1 20050313 on minor 0
fuse init (API version 7.9)
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
irlap_change_speed(), setting speed to 9600
Loading iSCSI transport class v2.0-724.
iscsi: registered transport (tcp)
iscsi: registered transport (iser)
mtrr: base(0xe4000000) is not aligned on a size(0x5000000) boundary
mtrr: base(0xe4000000) is not aligned on a size(0x5000000) boundary
mtrr: base(0xe4000000) is not aligned on a size(0x5000000) boundary
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
ADDRCONF(NETDEV_UP): eth0: link is not ready
hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
hdc: drive_cmd: error=0x04 { AbortedCommand }
ide: failed opcode was: 0xef
lp0: using parport0 (interrupt-driven).
ppdev: user-space parallel port driver
telepathy-salut[3659]: segfault at 0067736d eip b7ee35bc esp bfb231d0 error 4
pccard: card ejected from slot 1
e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present

** Loaded modules:
Module                  Size  Used by
ppdev                   8804  0 
lp                     11076  0 
binfmt_misc            11240  1 
ib_iser                32596  0 
rdma_cm                29488  1 ib_iser
ib_cm                  30572  1 rdma_cm
iw_cm                   8868  1 rdma_cm
ib_sa                  20340  2 rdma_cm,ib_cm
ib_mad                 33908  2 ib_cm,ib_sa
ib_core                50784  6 ib_iser,rdma_cm,ib_cm,iw_cm,ib_sa,ib_mad
ib_addr                 7460  1 rdma_cm
iscsi_tcp              23456  0 
libiscsi               24000  2 ib_iser,iscsi_tcp
scsi_transport_iscsi    27880  4 ib_iser,iscsi_tcp,libiscsi
ipv6                  240836  26 
fuse                   45204  1 
tcp_diag                1792  0 
inet_diag              12136  1 tcp_diag
eeprom                  7184  0 
savage                 29440  2 
drm                    74132  3 savage
thinkpad_acpi          48028  0 
nvram                   8488  2 thinkpad_acpi
cpufreq_ondemand        8492  1 
cpufreq_userspace       4260  0 
cpufreq_powersave       1856  0 
speedstep_ich           5296  0 
speedstep_lib           5348  1 speedstep_ich
freq_table              4512  2 cpufreq_ondemand,speedstep_ich
geode_aes               6044  1 
blkcipher               6724  1 geode_aes
aes_i586               33376  0 
aes_generic            27776  0 
airo_cs                 6080  2 
airo                   66012  1 airo_cs
pcmcia                 37036  2 airo_cs
firmware_class          9312  1 pcmcia
nsc_ircc               21328  0 
irda                  174236  1 nsc_ircc
crc_ccitt               2176  1 irda
parport_pc             33668  1 
parport                34280  3 ppdev,lp,parport_pc
psmouse                36464  0 
serio_raw               6660  0 
yenta_socket           24844  5 
rsrc_nonstatic         11872  1 yenta_socket
pcmcia_core            36884  4 airo_cs,pcmcia,yenta_socket,rsrc_nonstatic
battery                13572  0 
rtc                    13052  0 
ac                      6116  0 
video                  18672  0 
output                  3744  1 video
pcspkr                  3200  0 
snd_intel8x0           32028  1 
snd_ac97_codec         92932  1 snd_intel8x0
ac97_bus                2176  1 snd_ac97_codec
snd_pcm_oss            38272  0 
snd_mixer_oss          15296  1 snd_pcm_oss
snd_pcm                71780  3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd_timer              21092  1 snd_pcm
button                  8432  0 
snd                    48612  8 snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
iTCO_wdt               11268  0 
i2c_i801                9232  0 
soundcore               7552  1 snd
i2c_core               22432  2 eeprom,i2c_i801
snd_page_alloc         10056  2 snd_intel8x0,snd_pcm
intel_agp              23412  1 
agpgart                31688  2 drm,intel_agp
evdev                  11104  6 
ext3                  122888  1 
jbd                    43732  1 ext3
mbcache                 8288  1 ext3
ide_cd                 36224  0 
cdrom                  32512  1 ide_cd
ide_disk               15648  3 
ata_generic             7428  0 
libata                144464  1 ata_generic
scsi_mod              141164  5 ib_iser,iscsi_tcp,libiscsi,scsi_transport_iscsi,libata
generic                 4388  0 [permanent]
floppy                 54628  0 
e100                   33836  0 
mii                     5312  1 e100
piix                    7492  0 [permanent]
ide_core              108292  4 ide_cd,ide_disk,generic,piix
uhci_hcd               23376  0 
usbcore               132940  2 uhci_hcd
thermal                16028  0 
processor              36520  2 thermal
fan                     4772  0 

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82830 830 Chipset Host Bridge [8086:3575] (rev 04)
	Subsystem: IBM ThinkPad A/T/X Series [1014:021d]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 0
	Region 0: Memory at d0000000 (32-bit, prefetchable) [size=256M]
	Capabilities: <access denied>
	Kernel driver in use: agpgart-intel
	Kernel modules: intel-agp

00:01.0 PCI bridge [0604]: Intel Corporation 82830 830 Chipset AGP Bridge [8086:3576] (rev 04) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 96
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
	Memory behind bridge: c0100000-c01fffff
	Prefetchable memory behind bridge: e0000000-ebffffff
	Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Kernel modules: shpchp

00:1d.0 USB Controller [0c03]: Intel Corporation 82801CA/CAM USB Controller #1 [8086:2482] (rev 02) (prog-if 00 [UHCI])
	Subsystem: IBM ThinkPad A/T/X Series [1014:0220]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 11
	Region 4: I/O ports at 1800 [size=32]
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci-hcd

00:1d.1 USB Controller [0c03]: Intel Corporation 82801CA/CAM USB Controller #2 [8086:2484] (rev 02) (prog-if 00 [UHCI])
	Subsystem: IBM ThinkPad A/T/X Series [1014:0220]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 11
	Region 4: I/O ports at 1820 [size=32]
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci-hcd

00:1d.2 USB Controller [0c03]: Intel Corporation 82801CA/CAM USB Controller #3 [8086:2487] (rev 02) (prog-if 00 [UHCI])
	Subsystem: IBM ThinkPad A/T/X Series [1014:0220]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin C routed to IRQ 11
	Region 4: I/O ports at 1840 [size=32]
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci-hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 42) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Bus: primary=00, secondary=02, subordinate=08, sec-latency=64
	I/O behind bridge: 00002000-00006fff
	Memory behind bridge: c0200000-cfffffff
	Prefetchable memory behind bridge: f0000000-f7ffffff
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Kernel modules: shpchp

00:1f.0 ISA bridge [0601]: Intel Corporation 82801CAM ISA Bridge (LPC) [8086:248c] (rev 02)
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Kernel modules: iTCO_wdt, intel-rng

00:1f.1 IDE interface [0101]: Intel Corporation 82801CAM IDE U100 Controller [8086:248a] (rev 02) (prog-if 8a [Master SecP PriP])
	Subsystem: IBM ThinkPad A/T/X Series [1014:0220]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 11
	Region 0: I/O ports at 01f0 [size=8]
	Region 1: I/O ports at 03f4 [size=1]
	Region 2: I/O ports at 0170 [size=8]
	Region 3: I/O ports at 0374 [size=1]
	Region 4: I/O ports at 1860 [size=16]
	Region 5: Memory at 30000000 (32-bit, non-prefetchable) [size=1K]
	Kernel driver in use: PIIX_IDE
	Kernel modules: piix

00:1f.3 SMBus [0c05]: Intel Corporation 82801CA/CAM SMBus Controller [8086:2483] (rev 02)
	Subsystem: IBM ThinkPad A/T/X Series [1014:0220]
	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin B routed to IRQ 11
	Region 4: I/O ports at 1880 [size=32]
	Kernel driver in use: i801_smbus
	Kernel modules: i2c-i801

00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801CA/CAM AC'97 Audio Controller [8086:2485] (rev 02)
	Subsystem: IBM ThinkPad A30/A30p/T23 [1014:0222]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 11
	Region 0: I/O ports at 1c00 [size=256]
	Region 1: I/O ports at 18c0 [size=64]
	Kernel driver in use: Intel ICH
	Kernel modules: snd-intel8x0

01:00.0 VGA compatible controller [0300]: S3 Inc. SuperSavage IX/C SDR [5333:8c2e] (rev 05) (prog-if 00 [VGA controller])
	Subsystem: IBM ThinkPad T23 (2647-4MG) [1014:01fc]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64 (1000ns min, 63750ns max), Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at c0100000 (32-bit, non-prefetchable) [size=512K]
	Region 1: Memory at e8000000 (32-bit, prefetchable) [size=64M]
	Region 2: Memory at e4000000 (32-bit, prefetchable) [size=64M]
	Region 3: Memory at e0000000 (32-bit, prefetchable) [size=32M]
	[virtual] Expansion ROM at e2000000 [disabled] [size=64K]
	Capabilities: <access denied>
	Kernel modules: savagefb

02:00.0 CardBus bridge [0607]: Texas Instruments PCI1420 PC card Cardbus Controller [104c:ac51]
	Subsystem: IBM ThinkPad T23 (2647-4MG) [1014:023b]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 168, Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at 50000000 (32-bit, non-prefetchable) [size=4K]
	Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
	Memory window 0: f0000000-f3fff000 (prefetchable)
	Memory window 1: c4000000-c7fff000
	I/O window 0: 00002000-000020ff
	I/O window 1: 00002400-000024ff
	BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
	16-bit legacy interface ports at 0001
	Kernel driver in use: yenta_cardbus
	Kernel modules: yenta_socket

02:00.1 CardBus bridge [0607]: Texas Instruments PCI1420 PC card Cardbus Controller [104c:ac51]
	Subsystem: IBM ThinkPad T23 (2647-4MG) [1014:023b]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 168, Cache Line Size: 32 bytes
	Interrupt: pin B routed to IRQ 11
	Region 0: Memory at 51000000 (32-bit, non-prefetchable) [size=4K]
	Bus: primary=02, secondary=07, subordinate=07, sec-latency=176
	Memory window 0: f4000000-f7fff000 (prefetchable)
	Memory window 1: c8000000-cbfff000
	I/O window 0: 00002800-000028ff
	I/O window 1: 00002c00-00002cff
	BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
	16-bit legacy interface ports at 0001
	Kernel driver in use: yenta_cardbus
	Kernel modules: yenta_socket

02:02.0 Communication controller [0780]: Agere Systems WinModem 56k [11c1:0449] (rev 01)
	Subsystem: AMBIT Microsystem Corp. IBM ThinkPad T23 (2647-4MG) [1468:0410]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (63000ns min, 3500ns max)
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at c0201000 (32-bit, non-prefetchable) [size=256]
	Region 1: I/O ports at 6440 [size=8]
	Region 2: I/O ports at 6000 [size=256]
	Capabilities: <access denied>

02:08.0 Ethernet controller [0200]: Intel Corporation 82801CAM (ICH3) PRO/100 VE (LOM) Ethernet Controller [8086:1031] (rev 42)
	Subsystem: IBM ThinkPad A/T/X Series [1014:0209]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 66 (2000ns min, 14000ns max), Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at c0200000 (32-bit, non-prefetchable) [size=4K]
	Region 1: I/O ports at 6400 [size=64]
	Capabilities: <access denied>
	Kernel driver in use: e100
	Kernel modules: eepro100, e100



-- System Information:
Debian Release: lenny/sid
  APT prefers unstable
  APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: i386 (i686)

Kernel: Linux 2.6.24-1-686 (SMP w/1 CPU core)
Locale: LANG=fr_BE.UTF-8, LC_CTYPE=fr_BE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages linux-image-2.6.24-1-686 depends on:
ii  debconf [debconf-2.0]         1.5.21     Debian configuration management sy
ii  initramfs-tools [linux-initra 0.92       tools for generating an initramfs
ii  module-init-tools             3.4-1      tools for managing Linux kernel mo

Versions of packages linux-image-2.6.24-1-686 recommends:
ii  libc6-i686                    2.7-10     GNU C Library: Shared libraries [i

-- debconf information:
  linux-image-2.6.24-1-686/preinst/overwriting-modules-2.6.24-1-686: true
  linux-image-2.6.24-1-686/postinst/bootloader-error-2.6.24-1-686:
  linux-image-2.6.24-1-686/postinst/create-kimage-link-2.6.24-1-686: true
  linux-image-2.6.24-1-686/prerm/would-invalidate-boot-loader-2.6.24-1-686: true
  linux-image-2.6.24-1-686/preinst/initrd-2.6.24-1-686:
  linux-image-2.6.24-1-686/preinst/lilo-has-ramdisk:
  linux-image-2.6.24-1-686/preinst/abort-install-2.6.24-1-686:
  linux-image-2.6.24-1-686/prerm/removing-running-kernel-2.6.24-1-686: true
  linux-image-2.6.24-1-686/preinst/abort-overwrite-2.6.24-1-686:
  linux-image-2.6.24-1-686/postinst/bootloader-test-error-2.6.24-1-686:
  linux-image-2.6.24-1-686/preinst/lilo-initrd-2.6.24-1-686: true
  shared/kernel-image/really-run-bootloader: true
  linux-image-2.6.24-1-686/postinst/old-system-map-link-2.6.24-1-686: true
  linux-image-2.6.24-1-686/preinst/failed-to-move-modules-2.6.24-1-686:
  linux-image-2.6.24-1-686/postinst/depmod-error-initrd-2.6.24-1-686: false
  linux-image-2.6.24-1-686/preinst/bootloader-initrd-2.6.24-1-686: true
  linux-image-2.6.24-1-686/postinst/old-initrd-link-2.6.24-1-686: true
  linux-image-2.6.24-1-686/postinst/old-dir-initrd-link-2.6.24-1-686: true
  linux-image-2.6.24-1-686/postinst/depmod-error-2.6.24-1-686: false
  linux-image-2.6.24-1-686/preinst/elilo-initrd-2.6.24-1-686: true
  linux-image-2.6.24-1-686/postinst/kimage-is-a-directory:



--- End Message ---
--- Begin Message ---
On Wed, Sep 02, 2009 at 09:26:47AM +0200, Jerome Warnier wrote:
> Moritz Muehlenhoff wrote:
> > Would you be so kind to retest with 2.6.30 from unstable?
> >
> > Cheers,
> >         Moritz
> >   
> 
> Sorry for the long delay.
> 
> My Debian Sid laptop (a ThinkPad T23) where I had the problem died (God
> bless it).
> 
> While I could still test on other laptops (obviously, it needs a PCMCIA
> slot), I have no other Debian Sid or unemployed laptop to test this (I
> use a laptop running Ubuntu Jaunty, though). Do you think of another
> method I could test this?
> If not, you may close this bug.

I think we can just close the bug then, the error is likely fixed in the
mean time by upstream changes.

Cheers,
        Moritz


--- End Message ---

Reply to: