[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#544692: linux-image-2.6.30-1-686: pcspeaker mute



Package: linux-image-2.6.30-1-686
Version: 2.6.30-6
Severity: normal

Since upgrading to 2.6.30, my pcspeaker is mute, instead beeps are
sent to the soundcard which is a regeression since my sound card
usually has no speaker, only a headphone from time to time.

-- Package-specific info:
** Version:
Linux version 2.6.30-1-686 (Debian 2.6.30-6) (waldi@debian.org) (gcc version 4.3.4 (Debian 4.3.4-1) ) #1 SMP Sat Aug 15 19:11:58 UTC 2009

** Command line:
root=/dev/md0 ro quiet

** Tainted: P (1)

** Kernel log:
[    5.329538]  sdb:<6> sda:<6>input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0/input/input1
[    5.330024] generic-usb 0003:413C:2003.0002: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1a.0-2/input0
[    5.330036] usbcore: registered new interface driver usbhid
[    5.330038] usbhid: v2.6:USB HID core driver
[    5.331877]  sdb1 sdb2 < sda1 sda2 < sdb5 sda5 sdb6 >
[    5.363651] sd 1:0:0:0: [sdb] Attached SCSI disk
[    5.372319]  sda6 >
[    5.372461] sd 0:0:0:0: [sda] Attached SCSI disk
[    5.374536] Driver 'sr' needs updating - please use bus_type methods
[    5.378892] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    5.378895] Uniform CD-ROM driver Revision: 3.20
[    5.378960] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    5.383578] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    5.383601] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    5.383621] sr 2:0:0:0: Attached scsi generic sg2 type 5
[    5.614038] md: raid1 personality registered for level 1
[    5.620351] md: md0 stopped.
[    5.639410] md: bind<sdb1>
[    5.639562] md: bind<sda1>
[    5.640629] raid1: raid set md0 active with 2 out of 2 mirrors
[    5.640891] md: md1 stopped.
[    5.640964]  md0: unknown partition table
[    5.657994] md: bind<sdb6>
[    5.658127] md: bind<sda6>
[    5.659168] raid1: raid set md1 active with 2 out of 2 mirrors
[    5.659406]  md1: unknown partition table
[    5.792181] kjournald starting.  Commit interval 5 seconds
[    5.792185] EXT3-fs: mounted filesystem with ordered data mode.
[    7.803413] udev: starting version 141
[    8.356574] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[    8.358551] parport_pc 00:06: reported by Plug and Play ACPI
[    8.358602] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[    8.374009] input: PC Speaker as /devices/platform/pcspkr/input/input2
[    8.380258] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    8.380283] ACPI: Power Button [PWRF]
[    8.380334] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
[    8.380354] ACPI: Power Button [VBTN]
[    8.437266] processor ACPI_CPU:00: registered as cooling_device0
[    8.437325] processor ACPI_CPU:01: registered as cooling_device1
[    8.443791] EDAC MC: Ver: 2.1.0 Aug 15 2009
[    8.456479] x38: mmio space beyond accessible range (0xbfeda0000)
[    8.467168] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 20 (level, low) -> IRQ 20
[    8.980482] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    8.980502] HDA Intel 0000:00:1b.0: setting latency timer to 64
[    9.401327] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5
[   10.319399] EXT3 FS on md0, internal journal
[   10.516221] loop: module loaded
[   10.588921] coretemp coretemp.0: Using relative temperature scale!
[   10.588956] coretemp coretemp.1: Using relative temperature scale!
[   10.638969] usbcore: registered new interface driver usbserial
[   10.638981] USB Serial support registered for generic
[   10.638996] usbcore: registered new interface driver usbserial_generic
[   10.638998] usbserial: USB Serial Driver core
[   10.647918] USB Serial support registered for Handspring Visor / Palm OS
[   10.647928] USB Serial support registered for Sony Clie 3.5
[   10.647938] USB Serial support registered for Sony Clie 5.0
[   10.647953] usbcore: registered new interface driver visor
[   10.647955] visor: USB HandSpring Visor / Palm OS driver
[   10.725372] device-mapper: uevent: version 1.0.3
[   10.725537] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[   11.555067] padlock: VIA PadLock not detected.
[   11.576678] padlock: VIA PadLock Hash Engine not detected.
[   24.866763] fuse init (API version 7.11)
[   25.064183] kjournald starting.  Commit interval 5 seconds
[   25.095326] EXT3 FS on dm-2, internal journal
[   25.095426] EXT3-fs: mounted filesystem with ordered data mode.
[   25.180572] Adding 2931820k swap on /dev/mapper/sda5_crypt.  Priority:-1 extents:1 across:2931820k 
[   25.212833] Adding 2931820k swap on /dev/mapper/sdb5_crypt.  Priority:-2 extents:1 across:2931820k 
[   27.957711] tg3 0000:03:00.0: PME# disabled
[   27.958037] tg3 0000:03:00.0: irq 29 for MSI/MSI-X
[   28.013142] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   29.638712] tg3: eth0: Link is up at 100 Mbps, full duplex.
[   29.638775] tg3: eth0: Flow control is on for TX and on for RX.
[   29.638983] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   39.728380] eth0: no IPv6 routers present
[   57.717733] lp0: using parport0 (interrupt-driven).
[   57.724947] ppdev: user-space parallel port driver
[   61.369277] Linux agpgart interface v0.103
[   61.628022] nvidia: module license 'NVIDIA' taints kernel.
[   61.628027] Disabling lock debugging due to kernel taint
[   61.880035] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   61.880042] nvidia 0000:01:00.0: setting latency timer to 64
[   61.880149] NVRM: loading NVIDIA UNIX x86 Kernel Module  185.18.36  Fri Aug 14 17:18:04 PDT 2009
[   61.880642] NVRM: API mismatch: the client has the version 173.14.09, but
[   61.880643] NVRM: this kernel module has the version 185.18.36.  Please
[   61.880645] NVRM: make sure that this kernel module and all NVIDIA driver
[   61.880646] NVRM: components have the same version.
[   62.913402] NVRM: API mismatch: the client has the version 173.14.09, but
[   62.913403] NVRM: this kernel module has the version 185.18.36.  Please
[   62.913404] NVRM: make sure that this kernel module and all NVIDIA driver
[   62.913405] NVRM: components have the same version.
[   63.977128] NVRM: API mismatch: the client has the version 173.14.09, but
[   63.977130] NVRM: this kernel module has the version 185.18.36.  Please
[   63.977131] NVRM: make sure that this kernel module and all NVIDIA driver
[   63.977132] NVRM: components have the same version.
[   65.010474] NVRM: API mismatch: the client has the version 173.14.09, but
[   65.010476] NVRM: this kernel module has the version 185.18.36.  Please
[   65.010477] NVRM: make sure that this kernel module and all NVIDIA driver
[   65.010478] NVRM: components have the same version.
[  282.599396] process `skype' is using obsolete setsockopt SO_BSDCOMPAT

** Loaded modules:
Module                  Size  Used by
nvidia               9576396  26 
agpgart                30836  1 nvidia
ppdev                   6348  0 
lp                      8012  0 
fuse                   47752  1 
sha256_generic         11216  0 
aes_i586                8092  6 
aes_generic            27436  1 aes_i586
cbc                     3012  3 
dm_crypt               11092  3 
dm_snapshot            21604  0 
dm_mirror              12580  0 
dm_region_hash         10668  1 dm_mirror
dm_log                  8464  2 dm_mirror,dm_region_hash
dm_mod                 49992  10 dm_crypt,dm_snapshot,dm_mirror,dm_log
visor                  13812  0 
usbserial              27456  1 visor
coretemp                5176  0 
loop                   13324  0 
snd_hda_codec_analog    53456  1 
snd_hda_intel          22192  0 
snd_hda_codec          63580  2 snd_hda_codec_analog,snd_hda_intel
snd_hwdep               6120  1 snd_hda_codec
snd_pcm_oss            32232  0 
snd_mixer_oss          12368  1 snd_pcm_oss
snd_pcm                62420  3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_seq_midi            5688  0 
snd_rawmidi            18596  1 snd_seq_midi
snd_seq_midi_event      6212  1 snd_seq_midi
snd_seq                42436  2 snd_seq_midi,snd_seq_midi_event
snd_timer              17436  2 snd_pcm,snd_seq
snd_seq_device          6136  3 snd_seq_midi,snd_rawmidi,snd_seq
snd                    49060  11 snd_hda_codec_analog,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore               6184  1 snd
i2c_i801                8564  0 
x38_edac                4040  0 
snd_page_alloc          8180  2 snd_hda_intel,snd_pcm
psmouse                37528  0 
edac_core              35128  1 x38_edac
i2c_core               20844  2 nvidia,i2c_i801
processor              34504  0 
button                  5060  0 
pcspkr                  2104  0 
evdev                   8028  6 
parport_pc             22420  1 
dcdbas                  6736  0 
parport                31144  3 ppdev,lp,parport_pc
serio_raw               4560  0 
ext3                  107172  2 
jbd                    41036  1 ext3
mbcache                 6924  1 ext3
raid1                  18476  2 
md_mod                 77780  3 raid1
sg                     20296  0 
sr_mod                 13264  0 
cdrom                  30316  1 sr_mod
sd_mod                 28748  8 
crc_t10dif              1632  1 sd_mod
usbhid                 31568  0 
hid                    34528  1 usbhid
ahci                   30068  6 
uhci_hcd               19132  0 
libata                150904  1 ahci
scsi_mod              131800  4 sg,sr_mod,sd_mod,libata
tg3                    91244  0 
libphy                 19552  1 tg3
ehci_hcd               29680  0 
usbcore               126004  6 visor,usbserial,usbhid,uhci_hcd,ehci_hcd
thermal                12580  0 
fan                     4044  0 
thermal_sys            13140  3 processor,thermal,fan

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82X38/X48 Express DRAM Controller [8086:29e0]
	Subsystem: Dell Device [1028:0214]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>

00:01.0 PCI bridge [0604]: Intel Corporation 82X38/X48 Express Host-Primary PCI Express Bridge [8086:29e1] (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	I/O behind bridge: 0000d000-0000dfff
	Memory behind bridge: fa000000-fdefffff
	Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport-driver

00:06.0 PCI bridge [0604]: Intel Corporation 82X38/X48 Express Host-Secondary PCI Express Bridge [8086:29e9] (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport-driver

00:1a.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 02) (prog-if 00 [UHCI])
	Subsystem: Dell Device [1028:0214]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 16
	Region 4: I/O ports at ff20 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: uhci_hcd

00:1a.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 02) (prog-if 00 [UHCI])
	Subsystem: Dell Device [1028:0214]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 17
	Region 4: I/O ports at ff00 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: uhci_hcd

00:1a.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 02) (prog-if 00 [UHCI])
	Subsystem: Dell Device [1028:0214]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin C routed to IRQ 22
	Region 4: I/O ports at ecc0 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: uhci_hcd

00:1a.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 02) (prog-if 20 [EHCI])
	Subsystem: Dell Device [1028:0214]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin C routed to IRQ 22
	Region 0: Memory at fdffbc00 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd

00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 02)
	Subsystem: Dell Device [1028:0214]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at fdffc000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: HDA Intel

00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 02) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
	Memory behind bridge: f9f00000-f9ffffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport-driver

00:1c.5 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 [8086:294a] (rev 02) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
	Memory behind bridge: f9e00000-f9efffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport-driver

00:1d.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 02) (prog-if 00 [UHCI])
	Subsystem: Dell Device [1028:0214]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 23
	Region 4: I/O ports at ff80 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: uhci_hcd

00:1d.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 02) (prog-if 00 [UHCI])
	Subsystem: Dell Device [1028:0214]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 17
	Region 4: I/O ports at ff60 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: uhci_hcd

00:1d.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 02) (prog-if 00 [UHCI])
	Subsystem: Dell Device [1028:0214]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin C routed to IRQ 18
	Region 4: I/O ports at ff40 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: uhci_hcd

00:1d.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 02) (prog-if 20 [EHCI])
	Subsystem: Dell Device [1028:0214]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 23
	Region 0: Memory at ff980800 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 92) (prog-if 01 [Subtractive decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>

00:1f.0 ISA bridge [0601]: Intel Corporation 82801IR (ICH9R) LPC Interface Controller [8086:2916] (rev 02)
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>

00:1f.2 SATA controller [0106]: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 6 port SATA AHCI Controller [8086:2922] (rev 02) (prog-if 01 [AHCI 1.0])
	Subsystem: Dell Device [1028:0214]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin C routed to IRQ 28
	Region 0: I/O ports at fe00 [size=8]
	Region 1: I/O ports at fe10 [size=4]
	Region 2: I/O ports at fe20 [size=8]
	Region 3: I/O ports at fe30 [size=4]
	Region 4: I/O ports at fec0 [size=32]
	Region 5: Memory at ff970000 (32-bit, non-prefetchable) [size=2K]
	Capabilities: <access denied>
	Kernel driver in use: ahci

00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 02)
	Subsystem: Dell Device [1028:0214]
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin C routed to IRQ 20
	Region 0: Memory at fdffbb00 (64-bit, non-prefetchable) [size=256]
	Region 4: I/O ports at ece0 [size=32]
	Kernel driver in use: i801_smbus

01:00.0 VGA compatible controller [0300]: nVidia Corporation G84 [Quadro FX 570] [10de:040e] (rev a1) (prog-if 00 [VGA controller])
	Subsystem: nVidia Corporation Device [10de:0474]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at fc000000 (32-bit, non-prefetchable) [size=16M]
	Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
	Region 3: Memory at fa000000 (64-bit, non-prefetchable) [size=32M]
	Region 5: I/O ports at dc80 [size=128]
	[virtual] Expansion ROM at fde00000 [disabled] [size=128K]
	Capabilities: <access denied>
	Kernel driver in use: nvidia

03:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5721 Gigabit Ethernet PCI Express [14e4:1659] (rev 21)
	Subsystem: Broadcom Corporation NetXtreme BCM5721 Gigabit Ethernet PCI Express [14e4:1659]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 29
	Region 0: Memory at f9ff0000 (64-bit, non-prefetchable) [size=64K]
	Expansion ROM at <ignored> [disabled]
	Capabilities: <access denied>
	Kernel driver in use: tg3

04:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5754 Gigabit Ethernet PCI Express [14e4:167a] (rev 02)
	Subsystem: Dell Precision T3400 [1028:0214]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 17
	Region 0: Memory at f9ef0000 (64-bit, non-prefetchable) [size=64K]
	Capabilities: <access denied>
	Kernel driver in use: tg3



-- System Information:
Debian Release: squeeze/sid
  APT prefers testing
  APT policy: (990, 'testing'), (500, 'unstable'), (500, 'stable'), (1, 'experimental')
Architecture: i386 (i686)

Kernel: Linux 2.6.30-1-686 (SMP w/2 CPU cores)
Locale: LANG=C, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-2.6.30-1-686 depends on:
ii  debconf [debconf-2.0]         1.5.27     Debian configuration management sy
ii  initramfs-tools [linux-initra 0.93.4     tools for generating an initramfs
ii  module-init-tools             3.10-3     tools for managing Linux kernel mo

Versions of packages linux-image-2.6.30-1-686 recommends:
ii  libc6-i686                    2.9-25     GNU C Library: Shared libraries [i

Versions of packages linux-image-2.6.30-1-686 suggests:
ii  grub                          0.97-56    GRand Unified Bootloader (dummy pa
ii  grub-legacy [grub]            0.97-56    GRand Unified Bootloader (Legacy v
pn  linux-doc-2.6.30              <none>     (no description available)

-- debconf information:
  linux-image-2.6.30-1-686/preinst/lilo-has-ramdisk:
  linux-image-2.6.30-1-686/postinst/create-kimage-link-2.6.30-1-686: true
  linux-image-2.6.30-1-686/prerm/would-invalidate-boot-loader-2.6.30-1-686: true
  linux-image-2.6.30-1-686/preinst/overwriting-modules-2.6.30-1-686: true
  linux-image-2.6.30-1-686/postinst/old-dir-initrd-link-2.6.30-1-686: true
  linux-image-2.6.30-1-686/preinst/failed-to-move-modules-2.6.30-1-686:
  linux-image-2.6.30-1-686/preinst/initrd-2.6.30-1-686:
  linux-image-2.6.30-1-686/prerm/removing-running-kernel-2.6.30-1-686: true
  linux-image-2.6.30-1-686/postinst/kimage-is-a-directory:
  linux-image-2.6.30-1-686/preinst/abort-overwrite-2.6.30-1-686:
  linux-image-2.6.30-1-686/preinst/bootloader-initrd-2.6.30-1-686: true
  linux-image-2.6.30-1-686/postinst/depmod-error-initrd-2.6.30-1-686: false
  shared/kernel-image/really-run-bootloader: true
  linux-image-2.6.30-1-686/postinst/old-initrd-link-2.6.30-1-686: true
  linux-image-2.6.30-1-686/postinst/depmod-error-2.6.30-1-686: false
  linux-image-2.6.30-1-686/postinst/old-system-map-link-2.6.30-1-686: true
  linux-image-2.6.30-1-686/preinst/lilo-initrd-2.6.30-1-686: true
  linux-image-2.6.30-1-686/postinst/bootloader-test-error-2.6.30-1-686:
  linux-image-2.6.30-1-686/preinst/abort-install-2.6.30-1-686:
  linux-image-2.6.30-1-686/postinst/bootloader-error-2.6.30-1-686:
  linux-image-2.6.30-1-686/preinst/elilo-initrd-2.6.30-1-686: true



Reply to: