--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-2.6.29-1-686: suspend to RAM regression
- From: David Purton <dcpurton@marshwiggle.net>
- Date: Sat, 18 Apr 2009 17:45:48 +1000
- Message-id: <20090418074548.4152.66444.reportbug@localhost>
Package: linux-image-2.6.29-1-686
Version: 2.6.29-2
Severity: normal
Suspend to RAM has been working (from gnome) on previous kernels
(2.6.26, 2.6.28) but no longer works with 2.6.29.
Sometimes it will suspend and resume once ok, but never twice. And
mostly not even once. There is some stuff dumped to the console on the
second attempt if the first has worked ok, but there is never enough time
to read it.
Booting back to eariler kernels restores my ability to suspend.
s2ram -i offers the following:
This machine can be identified by:
sys_vendor = "CLEVO Co."
sys_product = "M5x0G"
sys_version = "Not Applicable"
bios_version = "SONOMA01.86C.0056.D.0510251336"
Can provide more info if given instructions on what is useful and hw to
provide it.
cheers
dc
-- Package-specific info:
** Version:
Linux version 2.6.29-1-686 (Debian 2.6.29-2) (waldi@debian.org) (gcc version 4.3.3 (Debian 4.3.3-5) ) #1 SMP Sat Apr 4 17:36:29 UTC 2009
** Command line:
root=/dev/hda1 ro
** Not tainted
** Kernel log:
[ 2.812625] hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 2.812947] hdb: UDMA/33 mode selected
[ 2.813361] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 2.840294] ata_piix 0000:00:1f.2: version 2.12
[ 2.840313] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.840393] ata_piix 0000:00:1f.2: MAP [ P0 P2 -- -- ]
[ 2.840714] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 2.843502] scsi0 : ata_piix
[ 2.843529] scsi1 : ata_piix
[ 2.844832] ata1: SATA max UDMA/133 cmd 0x18c8 ctl 0x18c0 bmdma 0x18b0 irq 19
[ 2.844907] ata2: SATA max UDMA/133 cmd 0x18a8 ctl 0x180c bmdma 0x18b8 irq 19
[ 3.187681] ide-gd driver 1.18
[ 3.187776] hda: max request size: 512KiB
[ 3.189687] hda: 156301488 sectors (80026 MB) w/7539KiB Cache, CHS=16383/255/63
[ 3.191618] hda: cache flushes supported
[ 3.191729] hda:<6>ide-cd driver 5.00
[ 3.208902] hda1 hda2 hda3 < hda5 hda6 hda7 >
[ 3.285029] ide-cd: hdb: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
[ 3.285362] Uniform CD-ROM driver Revision: 3.20
[ 3.925534] PM: Starting manual resume from disk
[ 3.997589] kjournald starting. Commit interval 5 seconds
[ 3.997669] EXT3-fs: mounted filesystem with ordered data mode.
[ 5.565382] udev: starting version 140
[ 5.799462] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 5.799564] ACPI: Power Button (FF) [PWRF]
[ 5.799687] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 5.799781] ACPI: Power Button (CM) [PWB]
[ 5.799896] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
[ 5.799995] ACPI: Sleep Button (CM) [SLPB]
[ 5.800131] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input5
[ 5.800557] ACPI: Lid Switch [LID]
[ 5.820028] ACPI: AC Adapter [AC] (on-line)
[ 5.899513] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/input/input6
[ 5.899618] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 5.987598] ACPI: Battery Slot [BAT0] (battery present)
[ 6.328146] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 6.696554] lib80211: common routines for IEEE802.11 drivers
[ 6.696631] lib80211_crypt: registered algorithm 'NULL'
[ 6.811839] usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x043D pid 0x0123
[ 6.811953] usbcore: registered new interface driver usblp
[ 6.885902] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 6.886000] ACPI: I/O resource 0000:00:1f.3 [0x18e0-0x18ff] conflicts with ACPI region SMBI [0x18e0-0x18ef]
[ 6.886096] ACPI: Device needs an ACPI driver
[ 6.925264] hda: UDMA/100 mode selected
[ 6.977051] intel_rng: FWH not detected
[ 7.241916] yenta_cardbus 0000:06:07.0: CardBus bridge found [1558:5401]
[ 7.242012] yenta_cardbus 0000:06:07.0: Enabling burst memory read transactions
[ 7.242106] yenta_cardbus 0000:06:07.0: Using CSCINT to route CSC interrupts to PCI
[ 7.242196] yenta_cardbus 0000:06:07.0: Routing CardBus interrupts to PCI
[ 7.242273] yenta_cardbus 0000:06:07.0: TI: mfunc 0x00001202, devctl 0x44
[ 7.299211] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 7.299289] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[ 7.367564] ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, git-1.2.2
[ 7.367641] ipw2100: Copyright(c) 2003-2006 Intel Corporation
[ 7.472842] yenta_cardbus 0000:06:07.0: ISA IRQ mask 0x0cf8, PCI irq 16
[ 7.473902] yenta_cardbus 0000:06:07.0: Socket status: 30000006
[ 7.473976] pci_bus 0000:06: Raising subordinate bus# of parent bus (#06) from #06 to #0a
[ 7.474074] yenta_cardbus 0000:06:07.0: pcmcia: parent PCI bridge I/O window: 0x5000 - 0x5fff
[ 7.474168] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x5000-0x5fff: clean.
[ 7.474537] yenta_cardbus 0000:06:07.0: pcmcia: parent PCI bridge Memory window: 0xb0000000 - 0xb00fffff
[ 7.474633] yenta_cardbus 0000:06:07.0: pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x55ffffff
[ 7.475539] ipw2100 0000:06:03.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 7.476188] ipw2100: Detected Intel PRO/Wireless 2100 Network Connection
[ 7.476271] eth1 (ipw2100): not using net_device_ops yet
[ 7.476344] ipw2100 0000:06:03.0: firmware: requesting ipw2100-1.3.fw
[ 7.681939] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 7.682141] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 7.687561] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio4/input/input8
[ 7.842652] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
[ 7.844549] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 7.845490] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[ 7.846213] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[ 7.847100] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[ 8.287009] hda: UDMA/100 mode selected
[ 9.201938] Adding 1951888k swap on /dev/hda2. Priority:-1 extents:1 across:1951888k
[ 10.199274] EXT3 FS on hda1, internal journal
[ 11.287494] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
[ 14.035128] fuse init (API version 7.11)
[ 14.129446] kjournald starting. Commit interval 5 seconds
[ 14.129857] EXT3 FS on hda7, internal journal
[ 14.129979] EXT3-fs: mounted filesystem with ordered data mode.
[ 14.166093] kjournald starting. Commit interval 5 seconds
[ 14.166470] EXT3 FS on hda5, internal journal
[ 14.166590] EXT3-fs: mounted filesystem with ordered data mode.
[ 14.168958] kjournald starting. Commit interval 5 seconds
[ 14.169317] EXT3 FS on hda6, internal journal
[ 14.169437] EXT3-fs: mounted filesystem with ordered data mode.
[ 17.550789] r8169: eth0: link down
[ 20.599305] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 20.599388] apm: overridden by ACPI.
[ 33.796846] hda: UDMA/100 mode selected
[ 34.407750] [drm] Initialized drm 1.1.0 20060810
[ 34.479288] pci 0000:00:02.0: power state changed by ACPI to D0
[ 34.479308] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 34.479318] pci 0000:00:02.0: setting latency timer to 64
[ 34.484749] [drm] Initialized i915 1.6.0 20080730 on minor 0
[ 123.050282] CPU0 attaching NULL sched-domain.
[ 123.050320] CPU0 attaching NULL sched-domain.
[ 128.781978] lib80211_crypt: registered algorithm 'TKIP'
[ 164.877810] process `skype' is using obsolete setsockopt SO_BSDCOMPAT
** Loaded modules:
Module Size Used by
michael_mic 2088 8
arc4 1544 4
ecb 2352 4
lib80211_crypt_tkip 7792 2
binfmt_misc 7168 1
i915 129464 2
drm 133260 3 i915
i2c_algo_bit 4888 1 i915
cpufreq_stats 3588 0
cpufreq_conservative 5456 0
fuse 48352 3
acpi_cpufreq 6868 0
speedstep_lib 4172 0
cpufreq_userspace 2748 0
cpufreq_powersave 1276 0
ide_generic 2252 0 [permanent]
snd_hda_codec_si3054 3920 1
snd_hda_codec_realtek 173504 1
snd_hda_intel 22092 1
snd_hda_codec 58808 3 snd_hda_codec_si3054,snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 6000 1 snd_hda_codec
snd_pcm_oss 31708 0
snd_mixer_oss 12000 1 snd_pcm_oss
snd_pcm 62708 4 snd_hda_codec_si3054,snd_hda_intel,snd_hda_codec,snd_pcm_oss
pcmcia 23312 0
snd_seq_dummy 2368 0
snd_seq_oss 24756 0
snd_seq_midi 5448 0
snd_rawmidi 18544 1 snd_seq_midi
snd_seq_midi_event 6072 2 snd_seq_oss,snd_seq_midi
snd_seq 42120 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer 17808 2 snd_pcm,snd_seq
snd_seq_device 6108 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
ipw2100 59516 0
libipw 23788 1 ipw2100
yenta_socket 21276 1
rsrc_nonstatic 9424 1 yenta_socket
snd 48420 15 snd_hda_codec_si3054,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore 6204 1 snd
i2c_i801 8104 0
psmouse 36628 0
usblp 10384 0
pcmcia_core 30784 3 pcmcia,yenta_socket,rsrc_nonstatic
lib80211 6076 2 lib80211_crypt_tkip,libipw
rng_core 3644 0
snd_page_alloc 8036 2 snd_hda_intel,snd_pcm
i2c_core 20828 4 i915,drm,i2c_algo_bit,i2c_i801
pcspkr 2092 0
serio_raw 4544 0
evdev 8160 15
battery 5832 0
video 16348 0
output 2504 1 video
ac 2872 0
button 5672 0
ext3 107180 4
jbd 42500 1 ext3
mbcache 7180 1 ext3
ide_cd_mod 25532 0
cdrom 29804 1 ide_cd_mod
ide_gd_mod 18904 6
ide_pci_generic 3408 0
ahci 27568 0
ata_generic 4316 0
usbhid 29132 0
hid 34260 1 usbhid
ata_piix 20092 0
r8169 27728 0
mii 4648 1 r8169
firewire_ohci 18620 0
firewire_core 33500 1 firewire_ohci
crc_itu_t 1796 1 firewire_core
piix 5584 5
libata 148892 3 ahci,ata_generic,ata_piix
sdhci_pci 6364 0
sdhci 14260 1 sdhci_pci
mmc_core 44104 1 sdhci
led_class 3668 1 sdhci
uhci_hcd 19392 0
ide_core 91820 5 ide_generic,ide_cd_mod,ide_gd_mod,ide_pci_generic,piix
scsi_mod 132076 1 libata
ehci_hcd 29936 0
usbcore 124912 5 usblp,usbhid,uhci_hcd,ehci_hcd
intel_agp 22548 1
agpgart 30624 3 drm,intel_agp
thermal 15092 0
processor 39540 3 acpi_cpufreq,thermal
fan 4104 0
thermal_sys 10272 4 video,thermal,processor,fan
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller [8086:2590] (rev 04)
Subsystem: CLEVO/KAPOK Computer Device [1558:5401]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller [8086:2592] (rev 04) (prog-if 00 [VGA controller])
Subsystem: CLEVO/KAPOK Computer Device [1558:5401]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at a0080000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at 1800 [size=8]
Region 2: Memory at c0000000 (32-bit, prefetchable) [size=256M]
Region 3: Memory at a0040000 (32-bit, non-prefetchable) [size=256K]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
00:02.1 Display controller [0380]: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller [8086:2792] (rev 04)
Subsystem: CLEVO/KAPOK Computer Device [1558:5401]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: Memory at 56000000 (32-bit, non-prefetchable) [disabled] [size=512K]
Capabilities: <access denied>
00:1b.0 Audio device [0403]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller [8086:2668] (rev 04)
Subsystem: CLEVO/KAPOK Computer Device [1558:5401]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at a0000000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 [8086:2660] (rev 04) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: a4000000-a7ffffff
Prefetchable memory behind bridge: 00000000d0000000-00000000d3ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
00:1c.1 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 [8086:2662] (rev 04) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: a8000000-abffffff
Prefetchable memory behind bridge: 00000000b4000000-00000000b7ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
00:1c.2 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 3 [8086:2664] (rev 04) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: ac000000-afffffff
Prefetchable memory behind bridge: 00000000d4000000-00000000d7ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
00:1d.0 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 [8086:2658] (rev 04) (prog-if 00 [UHCI])
Subsystem: CLEVO/KAPOK Computer Device [1558:5401]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at 1820 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 [8086:2659] (rev 04) (prog-if 00 [UHCI])
Subsystem: CLEVO/KAPOK Computer Device [1558:5401]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 1840 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 [8086:265a] (rev 04) (prog-if 00 [UHCI])
Subsystem: CLEVO/KAPOK Computer Device [1558:5401]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 1860 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 [8086:265b] (rev 04) (prog-if 00 [UHCI])
Subsystem: CLEVO/KAPOK Computer Device [1558:5401]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 16
Region 4: I/O ports at 1880 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller [8086:265c] (rev 04) (prog-if 20 [EHCI])
Subsystem: CLEVO/KAPOK Computer Device [1558:5401]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at a0004000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev d4) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=06, subordinate=0a, sec-latency=32
I/O behind bridge: 00005000-00005fff
Memory behind bridge: b0000000-b00fffff
Prefetchable memory behind bridge: 0000000050000000-0000000055ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge [8086:2641] (rev 04)
Subsystem: CLEVO/KAPOK Computer Device [1558:5401]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:1f.1 IDE interface [0101]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller [8086:266f] (rev 04) (prog-if 8a [Master SecP PriP])
Subsystem: CLEVO/KAPOK Computer Device [1558:5401]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 1810 [size=16]
Kernel driver in use: PIIX_IDE
00:1f.2 IDE interface [0101]: Intel Corporation 82801FBM (ICH6M) SATA Controller [8086:2653] (rev 04) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: CLEVO/KAPOK Computer Device [1558:5401]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at 18c8 [size=8]
Region 1: I/O ports at 18c0 [size=4]
Region 2: I/O ports at 18a8 [size=8]
Region 3: I/O ports at 180c [size=4]
Region 4: I/O ports at 18b0 [size=16]
Region 5: Memory at a0004400 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller [8086:266a] (rev 04)
Subsystem: CLEVO/KAPOK Computer Device [1558:5401]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 18e0 [size=32]
Kernel driver in use: i801_smbus
06:03.0 Network controller [0280]: Intel Corporation PRO/Wireless LAN 2100 3B Mini PCI Adapter [8086:1043] (rev 04)
Subsystem: Intel Corporation Samsung X10/P30 integrated WLAN [8086:2522]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (500ns min, 8500ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at b0000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ipw2100
06:07.0 CardBus bridge [0607]: ENE Technology Inc CB-712/4 Cardbus Controller [1524:1412] (rev 10)
Subsystem: CLEVO/KAPOK Computer Device [1558:5401]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at b0003000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=06, secondary=07, subordinate=0a, sec-latency=176
Memory window 0: 50000000-53fff000 (prefetchable)
Memory window 1: 58000000-5bfff000
I/O window 0: 00005800-000058ff
I/O window 1: 00005c00-00005cff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
06:07.1 FLASH memory [0501]: ENE Technology Inc ENE PCI Memory Stick Card Reader Controller [1524:0530] (rev 01)
Subsystem: CLEVO/KAPOK Computer Device [1558:5401]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (250ns min, 1000ns max), Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 7
Region 0: Memory at b0001000 (32-bit, non-prefetchable) [size=128]
Capabilities: <access denied>
06:07.2 SD Host controller [0805]: ENE Technology Inc ENE PCI Secure Digital Card Reader Controller [1524:0550] (rev 01) (prog-if 01)
Subsystem: CLEVO/KAPOK Computer Device [1558:5401]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (8000ns min, 18000ns max), Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at b0001400 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
06:07.4 FLASH memory [0501]: ENE Technology Inc SD/MMC Card Reader Controller [1524:0551] (rev 01)
Subsystem: CLEVO/KAPOK Computer Device [1558:5401]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 17
Region 0: Memory at b0001100 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
06:09.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6306 Fire II IEEE 1394 OHCI Link Layer Controller [1106:3044] (rev 80) (prog-if 10 [OHCI])
Subsystem: CLEVO/KAPOK Computer Device [1558:5401]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (8000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at b0002000 (32-bit, non-prefetchable) [size=2K]
Region 1: I/O ports at 5400 [size=128]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
06:0b.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet [10ec:8169] (rev 10)
Subsystem: CLEVO/KAPOK Computer Device [1558:5401]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 64 (8000ns min, 16000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at 5000 [size=256]
Region 1: Memory at b0001c00 (32-bit, non-prefetchable) [size=256]
[virtual] Expansion ROM at 54000000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: r8169
-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
APT policy: (700, 'unstable')
Architecture: i386 (i686)
Kernel: Linux 2.6.29-1-686 (SMP w/1 CPU core)
Locale: LANG=en_AU.UTF-8, LC_CTYPE=en_AU.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.29-1-686 depends on:
ii debconf [debconf-2.0] 1.5.26 Debian configuration management sy
ii initramfs-tools [linux-initra 0.93.2 tools for generating an initramfs
ii module-init-tools 3.7-pre9-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.29-1-686 recommends:
ii libc6-i686 2.9-6 GNU C Library: Shared libraries [i
Versions of packages linux-image-2.6.29-1-686 suggests:
ii grub 0.97-53 GRand Unified Bootloader (Legacy v
pn linux-doc-2.6.29 <none> (no description available)
-- debconf information:
linux-image-2.6.29-1-686/preinst/abort-overwrite-2.6.29-1-686:
linux-image-2.6.29-1-686/preinst/elilo-initrd-2.6.29-1-686: true
linux-image-2.6.29-1-686/preinst/bootloader-initrd-2.6.29-1-686: true
linux-image-2.6.29-1-686/postinst/depmod-error-initrd-2.6.29-1-686: false
linux-image-2.6.29-1-686/postinst/old-system-map-link-2.6.29-1-686: true
linux-image-2.6.29-1-686/postinst/kimage-is-a-directory:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.29-1-686/preinst/overwriting-modules-2.6.29-1-686: true
linux-image-2.6.29-1-686/preinst/initrd-2.6.29-1-686:
linux-image-2.6.29-1-686/postinst/bootloader-test-error-2.6.29-1-686:
linux-image-2.6.29-1-686/prerm/removing-running-kernel-2.6.29-1-686: true
linux-image-2.6.29-1-686/preinst/lilo-has-ramdisk:
linux-image-2.6.29-1-686/postinst/old-dir-initrd-link-2.6.29-1-686: true
linux-image-2.6.29-1-686/preinst/lilo-initrd-2.6.29-1-686: true
linux-image-2.6.29-1-686/postinst/depmod-error-2.6.29-1-686: false
linux-image-2.6.29-1-686/postinst/bootloader-error-2.6.29-1-686:
linux-image-2.6.29-1-686/preinst/failed-to-move-modules-2.6.29-1-686:
linux-image-2.6.29-1-686/postinst/create-kimage-link-2.6.29-1-686: true
linux-image-2.6.29-1-686/prerm/would-invalidate-boot-loader-2.6.29-1-686: true
linux-image-2.6.29-1-686/preinst/abort-install-2.6.29-1-686:
linux-image-2.6.29-1-686/postinst/old-initrd-link-2.6.29-1-686: true
--- End Message ---