Bug#527265: Error also occurs in 2.6.30-5
The bug reappeared after upgrading testing from 2.6.26-2-alpha-generic to
linux-image-2.6.30-1-alpha-generic. I got the following
trace in the kernel log. The qlogic firmware package is installed, as
initramfs complained about missing bin files.
It is the same error message as before, but the driver loads correctly and
no "risc checksum" occurs. The system works as expected, all devices (SCSI
CD-ROM, SCSI ZIP disk with initrd and kernel) are reported. The root
partition is on another controller (SATA). The trace occurs on each reboot.
Kernel is:
Linux alpha 2.6.30-1-alpha-generic #1 Mon Aug 3 16:04:50 UTC 2009 (2.6.30-5)
Firmware package:
firmware-qlogic (0.17)
[ 4.416013] qla1280 0000:00:09.0: firmware: requesting qlogic/1040.bin
[ 4.416013] ------------[ cut here ]------------
[ 4.416013] WARNING: at
/build/buildd-linux-2.6_2.6.30-5-alpha-u828kA/linux-2
.6-2.6.30/debian/build/source_alpha_none/kernel/softirq.c:141
_local_bh_enable_i
p+0x4c/0xa4()
[ 4.416013] Modules linked in: tulip(+) bitrev qla1280(+) scsi_mod
usbcore(+)
de2104x crc32
[ 4.416013] fffffc000f0479f8 0000000000000005 fffffc000103bef0
fffffc000e86d7
c0
[ 4.416013] 0000000000000000 fffffc000c652c00 fffffc000e86d7c0
fffffff
f00000010
[ 4.416013] fffffc00011eb2d4 0000000000000001 fffffc00011ff958
fffffc0
00c652c00
[ 4.416013] fffffc000c652c18 fffffc000e86d7c0 fffffc000114baec
fffffc0
00c76e030
[ 4.416013] 0000000000000007 fffffc000e86d7c0 fffffc000c76e000
fffffc0
00e8113c0
[ 4.416013] fffffc00013c66e8 fffffc00012bfdab 0000000000000001
0000000
000000000
[ 4.416013] Trace:
[ 4.416013] [<fffffc000103bef0>] _local_bh_enable_ip+0x4c/0xa4
[ 4.416013] [<fffffc00011eb2d4>] sk_filter+0xcc/0x104
[ 4.416013] [<fffffc00011ff958>] netlink_broadcast+0x1e0/0x3bc
[ 4.416013] [<fffffc000114baec>] kobject_uevent_env+0x384/0x4a0
[ 4.416013] [<fffffc00011b4ad0>] _request_firmware+0x468/0x57c
[ 4.416013] [<fffffc000116485c>] local_pci_probe+0x24/0x38
[ 4.416013] [<fffffc0001164b4c>] pci_device_probe+0x64/0xa0
[ 4.416013] [<fffffc00011af048>] driver_probe_device+0xcc/0x1e0
[ 4.416013] [<fffffc00011af1e4>] __driver_attach+0x88/0xd4
[ 4.416013] [<fffffc00011ae5dc>] bus_for_each_dev+0x68/0xd0
[ 4.416013] [<fffffc00011af15c>] __driver_attach+0x0/0xd4
[ 4.416013] [<fffffc00011aee00>] driver_attach+0x2c/0x40
[ 4.416013] [<fffffc00011adb28>] bus_add_driver+0xd8/0x304
[ 4.416013] [<fffffc00011af69c>] driver_register+0x108/0x1d4
[ 4.416013] [<fffffc000116501c>] __pci_register_driver+0x5c/0x120
[ 4.416013] [<fffffc00010100bc>] do_one_initcall+0x74/0x1cc
[ 4.416013] [<fffffc000105fb68>] SyS_init_module+0xf0/0x2c0
[ 4.416013] [<fffffc000105fb50>] SyS_init_module+0xd8/0x2c0
[ 4.416013] [<fffffc0001010de4>] entSys+0xa4/0xc0
[ 4.416013]
[ 4.416013] ---[ end trace b7134e8cc61d5fa9 ]---
Reply to: