Bug#542470: linux-image-2.6.30-1-686: IPv6 can not be disabled
Package: linux-image-2.6.30-1-686
Version: 2.6.30-5
Severity: normal
IPv6 is enabled by default in kernel 2.6.30 and can't be disabled, at least not in an easy way.
I've tried both echo 1 >/proc/sys/net/ipv6/conf/all/disable_ipv6 and sysctl -w net.ipv6.conf.all.disable_ipv6=1 methods without any success.
I think this bug is related to https://bugs.launchpad.net/bugs/351656 in Ubuntu.
In that report someone says there's a fix from upstream and that's already fixed in 2.6.31 series.
There'd be a possible security risk in this whole thing.
Regards.
-- Package-specific info:
** Version:
Linux version 2.6.30-1-686 (Debian 2.6.30-5) (maks@debian.org) (gcc version 4.3.3 (Debian 4.3.3-15) ) #1 SMP Mon Aug 3 16:18:30 UTC 2009
** Command line:
root=/dev/mapper/gregson-root ro
** Not tainted
** Kernel log:
[ 4.635990] usb usb4: configuration #1 chosen from 1 choice
[ 4.636167] hub 4-0:1.0: USB hub found
[ 4.636241] hub 4-0:1.0: 2 ports detected
[ 4.636866] ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11
[ 4.636932] uhci_hcd 0000:02:01.1: PCI INT B -> Link[LNKF] -> GSI 11 (level, low) -> IRQ 11
[ 4.637012] uhci_hcd 0000:02:01.1: UHCI Host Controller
[ 4.637165] uhci_hcd 0000:02:01.1: new USB bus registered, assigned bus number 5
[ 4.637270] uhci_hcd 0000:02:01.1: irq 11, io base 0x0000a400
[ 4.637409] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.637471] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.637540] usb usb5: Product: UHCI Host Controller
[ 4.637595] usb usb5: Manufacturer: Linux 2.6.30-1-686 uhci_hcd
[ 4.637653] usb usb5: SerialNumber: 0000:02:01.1
[ 4.637876] usb usb5: configuration #1 chosen from 1 choice
[ 4.638004] hub 5-0:1.0: USB hub found
[ 4.639029] hub 5-0:1.0: 2 ports detected
[ 4.674466] SCSI subsystem initialized
[ 4.823370] libata version 3.00 loaded.
[ 4.848144] ide-gd driver 1.18
[ 4.848263] hda: max request size: 128KiB
[ 4.875398] ide-cd driver 5.00
[ 4.876202] hda: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=65535/16/63
[ 4.877455] hda: cache flushes supported
[ 4.877635] hda: hda1 hda2
[ 4.901097] ide-cd: hdc: ATAPI 40X DVD-ROM drive, 512kB Cache
[ 4.901318] Uniform CD-ROM driver Revision: 3.20
[ 4.913464] ide-cd: hdd: ATAPI 32X CD-ROM CD-R/RW drive, 2048kB Cache
[ 5.081943] device-mapper: uevent: version 1.0.3
[ 5.084084] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 5.423958] PM: Starting manual resume from disk
[ 5.489211] kjournald starting. Commit interval 5 seconds
[ 5.489292] EXT3-fs: mounted filesystem with ordered data mode.
[ 7.240796] udev: starting version 141
[ 7.473488] Marking TSC unstable due to TSC halts in idle
[ 7.473650] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 7.473894] processor ACPI_CPU:00: registered as cooling_device1
[ 7.473958] ACPI: Processor [CPU0] (supports 2 throttling states)
[ 7.476314] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 7.476395] ACPI: Power Button [PWRF]
[ 7.476594] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 7.476668] ACPI: Power Button [PWRB]
[ 7.476851] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[ 7.476927] ACPI: Sleep Button [SLPB]
[ 7.666465] parport_pc 00:0b: reported by Plug and Play ACPI
[ 7.666582] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 7.882075] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 7.913328] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 8.052585] gameport: NS558 PnP Gameport is pnp00:0e/gameport0, io 0x201, speed 755kHz
[ 8.057431] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 8.086799] intel_rng: FWH not detected
[ 8.176868] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[ 8.176938] i801_smbus 0000:00:1f.3: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 8.827555] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input5
[ 9.086851] Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 9.086951] Intel ICH 0000:00:1f.5: setting latency timer to 64
[ 9.408067] intel8x0_measure_ac97_clock: measured 55157 usecs (2650 samples)
[ 9.408136] intel8x0: clocking to 48000
[ 10.232835] EXT3 FS on dm-0, internal journal
[ 11.048986] loop: module loaded
[ 12.807334] fuse init (API version 7.11)
[ 12.933062] kjournald starting. Commit interval 5 seconds
[ 12.933372] EXT3 FS on dm-5, internal journal
[ 12.933472] EXT3-fs: mounted filesystem with ordered data mode.
[ 12.962840] kjournald starting. Commit interval 5 seconds
[ 12.963197] EXT3 FS on dm-4, internal journal
[ 12.963295] EXT3-fs: mounted filesystem with ordered data mode.
[ 12.990717] kjournald starting. Commit interval 5 seconds
[ 12.991052] EXT3 FS on dm-1, internal journal
[ 12.991152] EXT3-fs: mounted filesystem with ordered data mode.
[ 13.017301] kjournald starting. Commit interval 5 seconds
[ 13.017632] EXT3 FS on dm-2, internal journal
[ 13.017730] EXT3-fs: mounted filesystem with ordered data mode.
[ 13.794402] Adding 1130488k swap on /dev/mapper/gregson-swap_1. Priority:-1 extents:1 across:1130488k
[ 15.546990] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 25.108399] Bluetooth: Core ver 2.15
[ 25.111860] NET: Registered protocol family 31
[ 25.111922] Bluetooth: HCI device and connection manager initialized
[ 25.111982] Bluetooth: HCI socket layer initialized
[ 25.201162] Bluetooth: L2CAP ver 2.13
[ 25.201223] Bluetooth: L2CAP socket layer initialized
[ 25.224468] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 25.224532] Bluetooth: BNEP filters: protocol multicast
[ 25.270097] Bluetooth: RFCOMM socket layer initialized
[ 25.270171] Bluetooth: RFCOMM TTY layer initialized
[ 25.270228] Bluetooth: RFCOMM ver 1.11
[ 25.353584] Bridge firewalling registered
[ 25.465439] lp0: using parport0 (interrupt-driven).
[ 25.483169] Bluetooth: SCO (Voice Link) ver 0.6
[ 25.483231] Bluetooth: SCO socket layer initialized
[ 25.489215] ppdev: user-space parallel port driver
[ 25.904052] eth0: no IPv6 routers present
[ 28.774327] [drm] Initialized drm 1.1.0 20060810
[ 28.795811] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 5
[ 28.795820] PCI: setting IRQ 5 as level-triggered
[ 28.795832] pci 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 5 (level, low) -> IRQ 5
[ 28.796261] [drm] Initialized r128 2.5.0 20030725 for 0000:01:00.0 on minor 0
[ 28.888311] agpgart-intel 0000:00:00.0: AGP 2.0 bridge
[ 28.888341] agpgart-intel 0000:00:00.0: putting AGP V2 device into 1x mode
[ 28.888373] pci 0000:01:00.0: putting AGP V2 device into 1x mode
[ 28.951063] platform r128_cce.0: firmware: requesting r128/r128_cce.bin
** Loaded modules:
Module Size Used by
r128 30444 2
drm 137920 3 r128
ppdev 6348 0
sco 8832 2
lp 8012 0
bridge 39968 0
stp 2112 1 bridge
rfcomm 30368 0
bnep 10860 2
l2cap 18120 4 rfcomm,bnep
bluetooth 47060 6 sco,rfcomm,bnep,l2cap
speedstep_lib 4136 0
cpufreq_conservative 6256 0
cpufreq_userspace 2768 0
cpufreq_powersave 1292 0
cpufreq_stats 3520 0
ext2 54120 1
fuse 47752 1
loop 13324 0
snd_intel8x0 26584 2
snd_ac97_codec 91264 1 snd_intel8x0
snd_cs4236 26932 0
ac97_bus 1456 1 snd_ac97_codec
snd_wavefront 31744 0
snd_wss_lib 22940 2 snd_cs4236,snd_wavefront
snd_pcm_oss 32232 0
snd_opl3_lib 9088 2 snd_cs4236,snd_wavefront
snd_mixer_oss 12368 1 snd_pcm_oss
snd_hwdep 6120 2 snd_wavefront,snd_opl3_lib
snd_mpu401 5924 0
snd_mpu401_uart 6124 3 snd_cs4236,snd_wavefront,snd_mpu401
snd_pcm 62420 5 snd_intel8x0,snd_ac97_codec,snd_cs4236,snd_wss_lib,snd_pcm_oss
snd_seq_midi 5688 0
snd_rawmidi 18596 3 snd_wavefront,snd_mpu401_uart,snd_seq_midi
snd_seq_midi_event 6212 1 snd_seq_midi
snd_seq 42436 2 snd_seq_midi,snd_seq_midi_event
snd_timer 17436 4 snd_wss_lib,snd_opl3_lib,snd_pcm,snd_seq
snd_seq_device 6136 4 snd_opl3_lib,snd_seq_midi,snd_rawmidi,snd_seq
i2c_i801 8564 0
serio_raw 4560 0
snd 49060 20 snd_intel8x0,snd_ac97_codec,snd_cs4236,snd_wavefront,snd_wss_lib,snd_pcm_oss,snd_opl3_lib,snd_mixer_oss,snd_hwdep,snd_mpu401,snd_mpu401_uart,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore 6184 1 snd
evdev 8028 8
shpchp 26648 0
ns558 4032 0
i2c_core 20844 2 drm,i2c_i801
rng_core 3672 0
snd_page_alloc 8180 3 snd_intel8x0,snd_wss_lib,snd_pcm
pcspkr 2104 0
psmouse 37528 0
gameport 10248 2 ns558
pci_hotplug 24400 1 shpchp
parport_pc 22420 1
parport 31144 3 ppdev,lp,parport_pc
button 5060 0
processor 34504 1
ext3 107172 5
jbd 41036 1 ext3
mbcache 6924 2 ext2,ext3
dm_mirror 12580 0
dm_region_hash 10668 1 dm_mirror
dm_log 8464 2 dm_mirror,dm_region_hash
dm_snapshot 21604 0
dm_mod 49992 21 dm_mirror,dm_log,dm_snapshot
ide_cd_mod 24484 0
cdrom 30316 1 ide_cd_mod
ide_gd_mod 19852 3
ide_pci_generic 3632 0
ata_generic 4340 0
libata 150904 1 ata_generic
scsi_mod 131800 1 libata
uhci_hcd 19132 0
piix 5680 2
ehci_hcd 29680 0
8139cp 17520 0
intel_agp 22900 1
ide_core 88100 4 ide_cd_mod,ide_gd_mod,ide_pci_generic,piix
usbcore 126004 3 uhci_hcd,ehci_hcd
8139too 21472 0
mii 4664 2 8139cp,8139too
agpgart 30836 2 drm,intel_agp
floppy 46220 0
thermal 12580 0
fan 4044 0
thermal_sys 13140 3 processor,thermal,fan
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82850 850 (Tehama) Chipset Host Bridge (MCH) [8086:2530] (rev 02)
Subsystem: Intel Corporation 82850 850 (Tehama) Chipset Host Bridge (MCH) [8086:2530]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=64M]
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:01.0 PCI bridge [0604]: Intel Corporation 82850 850 (Tehama) Chipset AGP Bridge [8086:2532] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 00009000-00009fff
Memory behind bridge: d8000000-d9ffffff
Prefetchable memory behind bridge: d4000000-d7ffffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 04) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: da000000-dbffffff
Prefetchable memory behind bridge: 20000000-200fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:1f.0 ISA bridge [0601]: Intel Corporation 82801BA ISA Bridge (LPC) [8086:2440] (rev 04)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:1f.1 IDE interface [0101]: Intel Corporation 82801BA IDE U100 Controller [8086:244b] (rev 04) (prog-if 80 [Master])
Subsystem: Intel Corporation Device [8086:2442]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
Region 4: I/O ports at f000 [size=16]
Kernel driver in use: PIIX_IDE
00:1f.2 USB Controller [0c03]: Intel Corporation 82801BA/BAM USB Controller #1 [8086:2442] (rev 04) (prog-if 00 [UHCI])
Subsystem: Intel Corporation 82801BA/BAM USB Controller #1 [8086:2442]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 11
Region 4: I/O ports at b000 [size=32]
Kernel driver in use: uhci_hcd
00:1f.3 SMBus [0c05]: Intel Corporation 82801BA/BAM SMBus Controller [8086:2443] (rev 04)
Subsystem: Intel Corporation Device [8086:2442]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 11
Region 4: I/O ports at 5000 [size=16]
Kernel driver in use: i801_smbus
00:1f.4 USB Controller [0c03]: Intel Corporation 82801BA/BAM USB Controller #1 [8086:2444] (rev 04) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device [8086:2442]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 11
Region 4: I/O ports at b400 [size=32]
Kernel driver in use: uhci_hcd
00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801BA/BAM AC'97 Audio Controller [8086:2445] (rev 04)
Subsystem: Micro-Star International Co., Ltd. Device [1462:3390]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 11
Region 0: I/O ports at b800 [size=256]
Region 1: I/O ports at bc00 [size=64]
Kernel driver in use: Intel ICH
01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Rage 128 Pro Ultra TF [1002:5446] (prog-if 00 [VGA controller])
Subsystem: ATI Technologies Inc Rage Fury Pro/Xpert 2000 Pro [1002:0018]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (2000ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 5
Region 0: Memory at d4000000 (32-bit, prefetchable) [size=64M]
Region 1: I/O ports at 9000 [size=256]
Region 2: Memory at d9000000 (32-bit, non-prefetchable) [size=16K]
[virtual] Expansion ROM at d8000000 [disabled] [size=128K]
Capabilities: <access denied>
02:01.0 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 62) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 4: I/O ports at a000 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
02:01.1 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 62) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 11
Region 4: I/O ports at a400 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
02:01.2 USB Controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] (rev 65) (prog-if 20 [EHCI])
Subsystem: VIA Technologies, Inc. USB 2.0 [1106:3104]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 128 bytes
Interrupt: pin C routed to IRQ 11
Region 0: Memory at db010000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
02:03.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at a800 [size=256]
Region 1: Memory at db011000 (32-bit, non-prefetchable) [size=256]
[virtual] Expansion ROM at 20000000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: 8139too
02:04.0 Communication controller [0780]: Rockwell International HSF 56k Data/Fax/Voice/Spkp (w/Handset) Modem [127a:2015] (rev 01)
Subsystem: Rockwell International HSF 56k Data/Fax/Voice/Spkp (w/Handset) Modem [127a:2015]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin A routed to IRQ 5
Region 0: Memory at db000000 (32-bit, non-prefetchable) [size=64K]
Region 1: I/O ports at ac00 [size=8]
Capabilities: <access denied>
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.30-1-686 (SMP w/1 CPU core)
Locale: LANG=es_ES.UTF-8, LC_CTYPE=es_ES.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.30-1-686 depends on:
ii debconf [debconf-2.0] 1.5.27 Debian configuration management sy
ii initramfs-tools [linux-initra 0.93.4 tools for generating an initramfs
ii module-init-tools 3.9-2 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.30-1-686 recommends:
ii libc6-i686 2.9-23 GNU C Library: Shared libraries [i
Versions of packages linux-image-2.6.30-1-686 suggests:
ii grub 0.97-55 GRand Unified Bootloader (dummy pa
ii grub-legacy [grub] 0.97-55 GRand Unified Bootloader (Legacy v
pn linux-doc-2.6.30 <none> (no description available)
-- debconf information:
linux-image-2.6.30-1-686/preinst/lilo-has-ramdisk:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.30-1-686/postinst/old-initrd-link-2.6.30-1-686: true
linux-image-2.6.30-1-686/postinst/create-kimage-link-2.6.30-1-686: true
linux-image-2.6.30-1-686/postinst/depmod-error-2.6.30-1-686: false
linux-image-2.6.30-1-686/postinst/old-system-map-link-2.6.30-1-686: true
linux-image-2.6.30-1-686/prerm/would-invalidate-boot-loader-2.6.30-1-686: true
linux-image-2.6.30-1-686/preinst/overwriting-modules-2.6.30-1-686: true
linux-image-2.6.30-1-686/preinst/lilo-initrd-2.6.30-1-686: true
linux-image-2.6.30-1-686/postinst/old-dir-initrd-link-2.6.30-1-686: true
linux-image-2.6.30-1-686/preinst/failed-to-move-modules-2.6.30-1-686:
linux-image-2.6.30-1-686/postinst/bootloader-test-error-2.6.30-1-686:
linux-image-2.6.30-1-686/preinst/abort-install-2.6.30-1-686:
linux-image-2.6.30-1-686/postinst/bootloader-error-2.6.30-1-686:
linux-image-2.6.30-1-686/preinst/initrd-2.6.30-1-686:
linux-image-2.6.30-1-686/prerm/removing-running-kernel-2.6.30-1-686: true
linux-image-2.6.30-1-686/postinst/kimage-is-a-directory:
linux-image-2.6.30-1-686/preinst/abort-overwrite-2.6.30-1-686:
linux-image-2.6.30-1-686/preinst/elilo-initrd-2.6.30-1-686: true
linux-image-2.6.30-1-686/preinst/bootloader-initrd-2.6.30-1-686: true
linux-image-2.6.30-1-686/postinst/depmod-error-initrd-2.6.30-1-686: false
Reply to: