--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-2.6.25-2-686: su gets stuck for root -- stty getting stuck in T state
- From: Tim Connors <reportbug@rather.puzzling.org>
- Date: Thu, 05 Jun 2008 14:03:29 +1000
- Message-id: <20080605040329.19675.44512.reportbug@scuzzie.rather.puzzling.org>
Package: linux-image-2.6.25-2-686
Version: 2.6.25-4
Severity: normal
There's an upstream bug that has started affecting me. stty gets
backgrounded, and you can only kill -9 it to get your shell back. A
thread titled "su gets stuck for root" is on LKML with all the
details, and when there's an eventual patch, it would be good to
include it in the debian patchset.
-- Package-specific info:
** Version:
Linux version 2.6.25-2-686 (Debian 2.6.25-4) (maks@debian.org) (gcc version 4.1.3 20080420 (prerelease) (Debian 4.1.2-22)) #1 SMP Tue May 27 15:38:35 UTC 2008
** Command line:
root=/dev/mapper/scuzzie_36gb-scuzzie_36gb--i386 ro quiet
** Not tainted
** Kernel log:
[ 798.258922] EXT3-fs: mounted filesystem with journal data mode.
[ 798.262669] kjournald starting. Commit interval 5 seconds
[ 798.263137] EXT3 FS on dm-11, internal journal
[ 798.263137] EXT3-fs: mounted filesystem with journal data mode.
[ 800.290714] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 800.292024] martian source 192.168.1.3 from 192.168.1.254, on dev eth0
[ 800.292024] ll header: ff:ff:ff:ff:ff:ff:00:04:ed:78:c8:50:08:06
[ 800.292024] martian source 192.168.1.3 from 192.168.1.254, on dev eth0
[ 800.292024] ll header: ff:ff:ff:ff:ff:ff:00:04:ed:78:c8:50:08:06
[ 800.292024] martian source 192.168.1.3 from 192.168.1.254, on dev eth0
[ 800.292024] ll header: ff:ff:ff:ff:ff:ff:00:04:ed:78:c8:50:08:06
[ 800.292024] martian source 192.168.1.3 from 192.168.1.254, on dev eth0
[ 800.292024] ll header: ff:ff:ff:ff:ff:ff:00:04:ed:78:c8:50:08:06
[ 800.292024] martian source 192.168.1.3 from 192.168.1.254, on dev eth0
[ 800.292024] ll header: ff:ff:ff:ff:ff:ff:00:04:ed:78:c8:50:08:06
[ 800.292024] martian source 192.168.1.3 from 192.168.1.254, on dev eth0
[ 800.292024] ll header: ff:ff:ff:ff:ff:ff:00:04:ed:78:c8:50:08:06
[ 800.292024] martian source 192.168.1.3 from 192.168.1.17, on dev eth0
[ 800.292024] ll header: ff:ff:ff:ff:ff:ff:00:13:e8:9b:36:d7:08:06
[ 800.292024] martian source 192.168.1.3 from 192.168.1.17, on dev eth0
[ 800.292024] ll header: ff:ff:ff:ff:ff:ff:00:13:e8:9b:36:d7:08:06
[ 800.292024] martian source 192.168.1.3 from 192.168.1.17, on dev eth0
[ 800.292024] ll header: ff:ff:ff:ff:ff:ff:00:13:e8:9b:36:d7:08:06
[ 800.292024] martian source 192.168.1.3 from 192.168.1.17, on dev eth0
[ 800.292024] ll header: ff:ff:ff:ff:ff:ff:00:13:e8:9b:36:d7:08:06
[ 800.398584] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 803.688006] NET: Registered protocol family 10
[ 803.689850] lo: Disabled Privacy Extensions
[ 804.550877] RPC: Registered udp transport module.
[ 804.550888] RPC: Registered tcp transport module.
[ 806.573597] nf_conntrack version 0.5.0 (4096 buckets, 16384 max)
[ 806.744359] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 809.082179] ACPI: WMI: Mapper loaded
[ 810.454758] eth0: no IPv6 routers present
[ 811.969727] ondemand governor failed, too long transition latency of HW, fallback to performance governor
[ 812.105224] lp0: using parport0 (interrupt-driven).
[ 812.151297] ppdev: user-space parallel port driver
[ 817.783840] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 817.889025] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 817.903852] NFSD: starting 90-second grace period
[ 818.843517] warning: `ntpd' uses 32-bit capabilities (legacy support in use)
[ 821.734771] ondemand governor failed, too long transition latency of HW, fallback to performance governor
[ 1184.070018] [drm] Initialized drm 1.1.0 20060810
[ 1184.270097] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[ 1184.270121] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 1184.270625] [drm] Initialized r128 2.5.0 20030725 on minor 0
[ 1184.276458] agpgart: Found an AGP 1.0 compliant device at 0000:00:00.0.
[ 1184.276502] agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
[ 1184.276543] agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
[ 1249.002445] printk: 134 messages suppressed.
[ 1249.002469] wmrack[18254]: segfault at 38 ip 0804cb19 sp bfb4e270 error 4 in wmrack[8048000+d000]
[ 5232.861464] cpufreq: change to state 0 failed with new_state 1 and result 3
[ 5773.976356] cpufreq: change to state 1 failed with new_state 0 and result 3
[15618.010297] usb 4-4.2: reset low speed USB device using ehci_hcd and address 4
[20964.434524] cpufreq: change to state 0 failed with new_state 1 and result 3
[33923.675994] cpufreq: change to state 1 failed with new_state 0 and result 3
[36838.170083] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[36846.014283] eth0: no IPv6 routers present
[36893.782162] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[36900.681743] eth0: no IPv6 routers present
[37531.447682] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[37531.448293] martian source 192.168.1.3 from 192.168.1.17, on dev eth0
[37531.448293] ll header: 00:50:b6:01:99:4c:00:13:e8:9b:36:d7:08:00
[37531.448293] martian source 192.168.1.3 from 192.168.1.17, on dev eth0
[37531.448293] ll header: 00:50:b6:01:99:4c:00:13:e8:9b:36:d7:08:00
[37531.448293] martian source 192.168.1.3 from 192.168.1.17, on dev eth0
[37531.448293] ll header: 00:50:b6:01:99:4c:00:13:e8:9b:36:d7:08:00
[37531.448293] martian source 192.168.1.3 from 192.168.1.17, on dev eth0
[37531.448293] ll header: 00:50:b6:01:99:4c:00:13:e8:9b:36:d7:08:00
[37531.448293] martian source 192.168.1.3 from 192.168.1.17, on dev eth0
[37531.448293] ll header: 00:50:b6:01:99:4c:00:13:e8:9b:36:d7:08:00
[37531.448293] martian source 192.168.1.3 from 192.168.1.17, on dev eth0
[37531.448293] ll header: 00:50:b6:01:99:4c:00:13:e8:9b:36:d7:08:00
[37531.448293] martian source 192.168.1.3 from 192.168.1.17, on dev eth0
[37531.448293] ll header: 00:50:b6:01:99:4c:00:13:e8:9b:36:d7:08:00
[37531.448293] martian source 192.168.1.3 from 192.168.1.17, on dev eth0
[37531.448293] ll header: 00:50:b6:01:99:4c:00:13:e8:9b:36:d7:08:00
[37531.448570] martian source 192.168.1.3 from 192.168.1.17, on dev eth0
[37531.448580] ll header: 00:50:b6:01:99:4c:00:13:e8:9b:36:d7:08:00
[37531.448638] martian source 192.168.1.3 from 192.168.1.17, on dev eth0
[37531.448648] ll header: 00:50:b6:01:99:4c:00:13:e8:9b:36:d7:08:00
[37538.597392] eth0: no IPv6 routers present
[48446.208607] device-mapper: snapshots: Invalidating snapshot: Unable to allocate exception.
[49628.981590] kjournald starting. Commit interval 5 seconds
[49629.002159] EXT3 FS on dm-5, internal journal
[49629.002186] EXT3-fs: mounted filesystem with journal data mode.
[49639.325327] kjournald starting. Commit interval 5 seconds
[49639.325481] EXT3 FS on dm-9, internal journal
[49639.325481] EXT3-fs: mounted filesystem with journal data mode.
[51107.776312] usb 4-4.2: reset low speed USB device using ehci_hcd and address 4
[53070.947371] usb 4-4.2: reset low speed USB device using ehci_hcd and address 4
[68135.916865] usb 4-4.2: reset low speed USB device using ehci_hcd and address 4
[77407.973912] usb 4-4.2: reset low speed USB device using ehci_hcd and address 4
[77497.828829] usb 4-4.2: reset low speed USB device using ehci_hcd and address 4
[86359.939597] usb 4-4.2: reset low speed USB device using ehci_hcd and address 4
[86401.950206] usb 4-4.2: reset low speed USB device using ehci_hcd and address 4
[86487.889243] usb 4-4.2: reset low speed USB device using ehci_hcd and address 4
[86528.729232] usb 4-4.2: reset low speed USB device using ehci_hcd and address 4
[86532.188782] usb 4-4.2: reset low speed USB device using ehci_hcd and address 4
[88470.116127] usb 4-4.2: reset low speed USB device using ehci_hcd and address 4
** Loaded modules:
Module Size Used by
r128 34624 2
drm 72280 3 r128
xt_multiport 3104 8
nfsd 199568 2041
auth_rpcgss 39200 1 nfsd
exportfs 4768 1 nfsd
ppdev 8676 0
lp 11012 0
autofs4 20708 1
wmi 7880 0
container 4736 0
sbs 8544 0
sbshc 6784 1 sbs
speedstep_smi 5552 0
speedstep_lib 5316 1 speedstep_smi
cpufreq_stats 5216 0
cpufreq_ondemand 8428 0
freq_table 4512 3 speedstep_smi,cpufreq_stats,cpufreq_ondemand
cpufreq_conservative 7432 0
cpufreq_powersave 1856 0
cpufreq_userspace 3812 1
iptable_mangle 3264 0
iptable_nat 6728 1
iptable_filter 3424 1
ip_tables 13168 3 iptable_mangle,iptable_nat,iptable_filter
ipt_MASQUERADE 3776 1
nf_nat 18136 2 iptable_nat,ipt_MASQUERADE
nf_conntrack_ipv4 16616 3 iptable_nat,nf_nat
x_tables 15716 4 xt_multiport,iptable_nat,ip_tables,ipt_MASQUERADE
nf_conntrack 59892 4 iptable_nat,ipt_MASQUERADE,nf_nat,nf_conntrack_ipv4
nfs 225128 0
lockd 59752 3 nfsd,nfs
nfs_acl 3520 2 nfsd,nfs
sunrpc 171872 2038 nfsd,auth_rpcgss,nfs,lockd,nfs_acl
ipv6 241956 62
nls_utf8 2080 1
nls_cp437 5792 1
vfat 12160 1
fat 46880 1 vfat
nls_base 7268 4 nls_utf8,nls_cp437,vfat,fat
fuse 44348 15
i8k 6040 1
loop 16708 0
sd_mod 26072 6
usb_storage 76832 4
usbhid 40192 0
hid 36032 1 usbhid
ff_memless 5384 1 usbhid
asix 15744 0
usbnet 17928 1 asix
mii 5248 2 asix,usbnet
ehci_hcd 32620 0
ohci_hcd 21668 0
pcmcia 36044 0
parport_pc 25860 1
parport 33868 3 ppdev,lp,parport_pc
snd_maestro3 20964 0
button 8240 0
firmware_class 9088 2 pcmcia,snd_maestro3
snd_ac97_codec 91300 1 snd_maestro3
ac97_bus 1952 1 snd_ac97_codec
video 19728 0
output 3712 1 video
snd_pcm_oss 37824 0
snd_mixer_oss 14880 1 snd_pcm_oss
rtc 14272 0
snd_pcm 68228 3 snd_maestro3,snd_ac97_codec,snd_pcm_oss
snd_timer 21320 1 snd_pcm
snd_page_alloc 9992 1 snd_pcm
battery 8448 0
ac 4448 0
snd 48772 6 snd_maestro3,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
psmouse 35920 0
pcspkr 3136 0
serio_raw 6532 0
soundcore 7488 1 snd
i2c_piix4 8652 0
i2c_core 22548 1 i2c_piix4
yenta_socket 24300 3
rsrc_nonstatic 11584 1 yenta_socket
pcmcia_core 36436 3 pcmcia,yenta_socket,rsrc_nonstatic
shpchp 29716 0
pci_hotplug 26980 1 shpchp
intel_agp 25084 1
agpgart 31720 2 drm,intel_agp
evdev 11328 5
dcdbas 8064 0
ext3 120264 10
jbd 43444 1 ext3
mbcache 8260 1 ext3
dm_mirror 25316 0
dm_snapshot 17444 2
dm_mod 55656 23 dm_mirror,dm_snapshot
ide_disk 13952 5
ide_pci_generic 4228 0 [permanent]
floppy 53284 0
uhci_hcd 22352 0
piix 7176 0 [permanent]
usbcore 130032 9 usb_storage,usbhid,asix,usbnet,ehci_hcd,ohci_hcd,uhci_hcd
ide_core 100312 3 ide_disk,ide_pci_generic,piix
ata_generic 8004 0
libata 142032 1 ata_generic
scsi_mod 138508 3 sd_mod,usb_storage,libata
dock 10448 1 libata
thermal 19100 0
processor 39660 2 thermal
fan 5636 0
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge [8086:7190] (rev 03)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 32
Region 0: Memory at f4000000 (32-bit, prefetchable) [size=64M]
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
Kernel modules: intel-agp
00:01.0 PCI bridge [0604]: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge [8086:7191] (rev 03)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fd000000-feffffff
Prefetchable memory behind bridge: f8000000-fbffffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B+
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Kernel modules: shpchp
00:03.0 CardBus bridge [0607]: Texas Instruments PCI1420 PC card Cardbus Controller [104c:ac51]
Subsystem: Dell Device [1028:00b0]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at 30000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=02, subordinate=05, sec-latency=176
Memory window 0: 20000000-23fff000 (prefetchable)
Memory window 1: 24000000-27fff000
I/O window 0: 00001000-000010ff
I/O window 1: 00001400-000014ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
Kernel modules: yenta_socket
00:03.1 CardBus bridge [0607]: Texas Instruments PCI1420 PC card Cardbus Controller [104c:ac51]
Subsystem: Dell Device [1028:00b0]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at 30001000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=06, subordinate=09, sec-latency=176
Memory window 0: 28000000-2bfff000 (prefetchable)
Memory window 1: 2c000000-2ffff000
I/O window 0: 00001800-000018ff
I/O window 1: 00001c00-00001cff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
Kernel modules: yenta_socket
00:07.0 Bridge [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ISA [8086:7110] (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:07.1 IDE interface [0101]: Intel Corporation 82371AB/EB/MB PIIX4 IDE [8086:7111] (rev 01) (prog-if 80 [Master])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
Region 4: I/O ports at 0860 [size=16]
Kernel driver in use: PIIX_IDE
Kernel modules: piix
00:07.2 USB Controller [0c03]: Intel Corporation 82371AB/EB/MB PIIX4 USB [8086:7112] (rev 01)
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin D routed to IRQ 11
Region 4: I/O ports at dce0 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:07.3 Bridge [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ACPI [8086:7113] (rev 03)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin ? routed to IRQ 9
Kernel driver in use: piix4_smbus
Kernel modules: i2c-piix4
00:08.0 Multimedia audio controller [0401]: ESS Technology ES1983S Maestro-3i PCI Audio Accelerator [125d:1998] (rev 10)
Subsystem: Dell Device [1028:00b0]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 5
Region 0: I/O ports at d800 [size=256]
Region 1: Memory at f3ffe000 (32-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel modules: snd-maestro3
01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Rage Mobility M3 AGP 2x [1002:4c46] (rev 02)
Subsystem: Dell Device [1028:00b0]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (2000ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M]
Region 1: I/O ports at ec00 [size=256]
Region 2: Memory at fdffc000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel modules: aty128fb
06:00.0 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43) (prog-if 10)
Subsystem: Device [1631:0035]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (16000ns min, 10500ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at 2c000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
06:00.1 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43) (prog-if 10)
Subsystem: Device [1631:0035]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (20000ns min, 10500ns max)
Interrupt: pin B routed to IRQ 11
Region 0: Memory at 2c001000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
06:00.2 USB Controller [0c03]: NEC Corporation USB 2.0 [1033:00e0] (rev 04) (prog-if 20)
Subsystem: Device [1631:5040]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 68 (4000ns min, 8500ns max), Cache Line Size: 32 bytes
Interrupt: pin C routed to IRQ 11
Region 0: Memory at 2c002000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
-- System Information:
Debian Release: lenny/sid
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'testing'), (500, 'stable'), (1, 'experimental')
Architecture: i386 (i686)
Kernel: Linux 2.6.25-2-686 (SMP w/1 CPU core)
Locale: LANG=en_AU, LC_CTYPE=en_AU (charmap=ISO-8859-1)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.25-2-686 depends on:
ii debconf [debconf-2.0] 1.5.22 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92b tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.25-2-686 recommends:
ii libc6-i686 2.7-11 GNU C Library: Shared libraries [i
-- debconf information:
linux-image-2.6.25-2-686/preinst/abort-install-2.6.25-2-686:
linux-image-2.6.25-2-686/postinst/bootloader-test-error-2.6.25-2-686:
linux-image-2.6.25-2-686/prerm/removing-running-kernel-2.6.25-2-686: true
linux-image-2.6.25-2-686/postinst/old-initrd-link-2.6.25-2-686: true
linux-image-2.6.25-2-686/preinst/initrd-2.6.25-2-686:
linux-image-2.6.25-2-686/postinst/kimage-is-a-directory:
linux-image-2.6.25-2-686/postinst/depmod-error-2.6.25-2-686: false
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.25-2-686/preinst/overwriting-modules-2.6.25-2-686: true
linux-image-2.6.25-2-686/prerm/would-invalidate-boot-loader-2.6.25-2-686: true
linux-image-2.6.25-2-686/preinst/elilo-initrd-2.6.25-2-686: true
linux-image-2.6.25-2-686/postinst/depmod-error-initrd-2.6.25-2-686: false
linux-image-2.6.25-2-686/preinst/bootloader-initrd-2.6.25-2-686: true
linux-image-2.6.25-2-686/preinst/lilo-has-ramdisk:
linux-image-2.6.25-2-686/postinst/bootloader-error-2.6.25-2-686:
linux-image-2.6.25-2-686/preinst/lilo-initrd-2.6.25-2-686: true
linux-image-2.6.25-2-686/postinst/old-system-map-link-2.6.25-2-686: true
linux-image-2.6.25-2-686/postinst/create-kimage-link-2.6.25-2-686: true
linux-image-2.6.25-2-686/postinst/old-dir-initrd-link-2.6.25-2-686: true
linux-image-2.6.25-2-686/preinst/abort-overwrite-2.6.25-2-686:
linux-image-2.6.25-2-686/preinst/failed-to-move-modules-2.6.25-2-686:
--- End Message ---