Your message dated Sun, 16 Aug 2009 18:31:08 +0100 with message-id <1250443868.21652.189.camel@localhost> and subject line Re: Bug#541830: linux-image-2.6.30-1-686: Failed to load firmware "radeon/R300_cp.bin" has caused the Debian Bug report #541830, regarding linux-image-2.6.30-1-686: Failed to load firmware "radeon/R300_cp.bin" to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@bugs.debian.org immediately.) -- 541830: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=541830 Debian Bug Tracking System Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-2.6.30-1-686: Failed to load firmware "radeon/R300_cp.bin"
- From: xueqianzhao <xueqianzhao@gmail.com>
- Date: Sun, 16 Aug 2009 11:15:50 +0800
- Message-id: <[🔎] 20090816031550.8018.6324.reportbug@Inspiron-6000>
Package: linux-image-2.6.30-1-686 Version: 2.6.30-5 Severity: normal from dmesg, it shows: radeon_cp: Failed to load firmware "radeon/R300_cp.bin" [drm:radeon_do_init_cp] *ERROR* Failed to load firmware! my laptop's video card is ATI Mobility Radeon X300 when my kernel is 2.6.26, the radeon dri is fine and direct rendering is available.However, I upgraded the kernel several days ago, and the error message showed as above when booting and from X.Org.log, the rendering is disabled. I used "locate radeon" to search that bin file and can not find it. -- Package-specific info: ** Version: Linux version 2.6.30-1-686 (Debian 2.6.30-5) (maks@debian.org) (gcc version 4.3.3 (Debian 4.3.3-15) ) #1 SMP Mon Aug 3 16:18:30 UTC 2009 ** Command line: root=/dev/sda1 ro quiet ** Not tainted ** Kernel log: [ 4.602455] Marking TSC unstable due to TSC halts in idle [ 4.602534] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3]) [ 4.602565] processor ACPI_CPU:00: registered as cooling_device0 [ 4.602569] ACPI: Processor [CPU0] (supports 8 throttling states) [ 4.696419] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2 [ 4.696968] ACPI: Lid Switch [LID] [ 4.697028] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3 [ 4.697036] ACPI: Power Button [PBTN] [ 4.697088] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4 [ 4.697092] ACPI: Sleep Button [SBTN] [ 4.776167] lib80211: common routines for IEEE802.11 drivers [ 4.776171] lib80211_crypt: registered algorithm 'NULL' [ 4.884553] input: PC Speaker as /devices/platform/pcspkr/input/input5 [ 4.996414] ACPI: Battery Slot [BAT0] (battery present) [ 5.015243] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 5.119388] yenta_cardbus 0000:03:01.0: CardBus bridge found [1028:0188] [ 5.124022] Clocksource tsc unstable (delta = -324053240 ns) [ 5.195532] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input6 [ 5.213387] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input7 [ 5.243860] intel_rng: FWH not detected [ 5.245148] yenta_cardbus 0000:03:01.0: ISA IRQ mask 0x0cb8, PCI irq 19 [ 5.245153] yenta_cardbus 0000:03:01.0: Socket status: 30000006 [ 5.245157] pci_bus 0000:03: Raising subordinate bus# of parent bus (#03) from #04 to #07 [ 5.245165] yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff [ 5.245169] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x2000-0x2fff: clean. [ 5.245381] yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge Memory window: 0xdfc00000 - 0xdfcfffff [ 5.245385] yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x8bffffff [ 5.642453] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean. [ 5.644214] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean. [ 5.644931] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean. [ 5.645540] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean. [ 5.646299] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. [ 5.707893] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 5.707896] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com> [ 5.775268] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq [ 5.775272] ipw2200: Copyright(c) 2003-2006 Intel Corporation [ 5.775336] ipw2200 0000:03:03.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 5.776241] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection [ 5.776286] ipw2200 0000:03:03.0: firmware: requesting ipw2200-bss.fw [ 5.938305] Intel ICH 0000:00:1e.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 5.938341] Intel ICH 0000:00:1e.2: setting latency timer to 64 [ 6.098958] ipw2200: Detected geography ZZD (13 802.11bg channels, 0 802.11a channels) [ 6.764035] intel8x0_measure_ac97_clock: measured 55307 usecs (2665 samples) [ 6.764039] intel8x0: clocking to 48000 [ 6.764683] Intel ICH Modem 0000:00:1e.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 6.764700] Intel ICH Modem 0000:00:1e.3: setting latency timer to 64 [ 6.868056] MC'97 1 converters and GPIO not ready (0xff00) [ 8.598736] Adding 1967888k swap on /dev/sda6. Priority:-1 extents:1 across:1967888k [ 9.598780] loop: module loaded [ 9.844679] REISERFS (device sda5): found reiserfs format "3.6" with standard journal [ 9.844728] REISERFS (device sda5): using ordered data mode [ 9.845014] REISERFS (device sda5): journal params: device sda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 9.845363] REISERFS (device sda5): checking transaction log (sda5) [ 9.942285] REISERFS (device sda5): Using r5 hash to sort names [ 11.512976] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 12.613224] vboxdrv: Trying to deactivate the NMI watchdog permanently... [ 12.613231] vboxdrv: Successfully done. [ 12.613236] vboxdrv: Found 1 processor cores. [ 12.613386] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 12.613392] vboxdrv: Successfully loaded version 3.0.4 (interface 0x000e0000). [ 14.816199] b44: eth0: Link is up at 100 Mbps, full duplex. [ 14.816207] b44: eth0: Flow control is off for TX and off for RX. [ 14.816734] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 17.301884] [drm] Initialized drm 1.1.0 20060810 [ 17.327121] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 17.327132] pci 0000:01:00.0: setting latency timer to 64 [ 17.327369] [drm] Initialized radeon 1.30.0 20080528 for 0000:01:00.0 on minor 0 [ 19.795440] [drm] Setting GART location based on new memory map [ 19.796093] [drm] Loading R300 Microcode [ 19.796097] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin [ 19.826586] radeon_cp: Failed to load firmware "radeon/R300_cp.bin" [ 19.826591] [drm:radeon_do_init_cp] *ERROR* Failed to load firmware! [ 25.004016] eth0: no IPv6 routers present [ 907.436190] hub 1-0:1.0: unable to enumerate USB device on port 8 [ 908.952043] usb 5-2: new full speed USB device using uhci_hcd and address 2 [ 909.115489] usb 5-2: New USB device found, idVendor=0595, idProduct=2002 [ 909.115499] usb 5-2: New USB device strings: Mfr=4, Product=5, SerialNumber=6 [ 909.115506] usb 5-2: Product: Digital Camera [ 909.115511] usb 5-2: Manufacturer: Default [ 909.115517] usb 5-2: SerialNumber: Default 1234567 [ 909.115688] usb 5-2: configuration #1 chosen from 1 choice [ 909.265414] Initializing USB Mass Storage driver... [ 909.267759] scsi2 : SCSI emulation for USB Mass Storage devices [ 909.268552] usbcore: registered new interface driver usb-storage [ 909.268560] USB Mass Storage support registered. [ 909.284885] usb-storage: device found at 2 [ 909.284891] usb-storage: waiting for device to settle before scanning [ 914.285490] usb-storage: device scan complete [ 914.291499] scsi 2:0:0:0: Direct-Access Default Digital Camera 1. PQ: 0 ANSI: 0 CCS [ 914.292222] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 914.297467] sd 2:0:0:0: [sdb] 56767 512-byte hardware sectors: (29.0 MB/27.7 MiB) [ 914.314210] sd 2:0:0:0: [sdb] Write Protect is off [ 914.314220] sd 2:0:0:0: [sdb] Mode Sense: 00 06 00 00 [ 914.314226] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 914.337475] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 914.337487] sdb: sdb1 [ 914.343488] sdb: p1 size 56767 limited to end of disk [ 914.343711] sd 2:0:0:0: [sdb] Attached SCSI removable disk [ 915.547470] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 1579.184081] usb 5-2: USB disconnect, address 2 ** Loaded modules: Module Size Used by snd_seq_dummy 2420 0 nls_utf8 1488 0 nls_cp437 5320 0 vfat 8628 0 fat 41452 1 vfat nls_base 6416 4 nls_utf8,nls_cp437,vfat,fat usb_storage 48472 0 radeon 122724 0 drm 137920 1 radeon i2c_core 20844 1 drm vboxnetadp 66792 0 vboxnetflt 72264 0 vboxdrv 102480 1 vboxnetflt acpi_cpufreq 7640 0 cpufreq_powersave 1292 0 cpufreq_stats 3520 0 cpufreq_userspace 2768 0 cpufreq_conservative 6256 0 firewire_sbp2 12692 0 loop 13324 0 snd_intel8x0m 12228 0 snd_intel8x0 26584 1 snd_ac97_codec 91264 2 snd_intel8x0m,snd_intel8x0 ac97_bus 1456 1 snd_ac97_codec snd_pcm_oss 32232 0 snd_mixer_oss 12368 1 snd_pcm_oss snd_pcm 62420 4 snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss ipw2200 119972 0 snd_seq_midi 5688 0 snd_rawmidi 18596 1 snd_seq_midi libipw 24644 1 ipw2200 snd_seq_midi_event 6212 1 snd_seq_midi joydev 8576 0 dell_laptop 3164 0 rfkill 9668 1 dell_laptop snd_seq 42436 3 snd_seq_dummy,snd_seq_midi,snd_seq_midi_event serio_raw 4560 0 yenta_socket 21168 1 rng_core 3672 0 dcdbas 6736 1 dell_laptop rsrc_nonstatic 9664 1 yenta_socket pcspkr 2104 0 psmouse 37528 0 snd_timer 17436 2 snd_pcm,snd_seq snd_seq_device 6136 4 snd_seq_dummy,snd_seq_midi,snd_rawmidi,snd_seq evdev 8028 10 lib80211 6048 2 ipw2200,libipw button 5060 0 battery 6012 0 snd 49060 12 snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device processor 34504 2 acpi_cpufreq soundcore 6184 1 snd snd_page_alloc 8180 3 snd_intel8x0m,snd_intel8x0,snd_pcm ac 2960 0 reiserfs 187592 2 sg 20296 0 sr_mod 13264 0 cdrom 30316 1 sr_mod sd_mod 28748 4 crc_t10dif 1632 1 sd_mod ata_generic 4340 0 ide_pci_generic 3632 0 ide_core 88100 1 ide_pci_generic ahci 30068 0 ata_piix 20848 3 uhci_hcd 19132 0 b44 22100 0 libata 150904 3 ata_generic,ahci,ata_piix sdhci_pci 6540 0 sdhci 14868 1 sdhci_pci firewire_ohci 18952 0 ssb 37692 1 b44 pcmcia 24280 1 ssb ehci_hcd 29680 0 mmc_core 46384 1 sdhci led_class 3852 1 sdhci firewire_core 37736 2 firewire_sbp2,firewire_ohci crc_itu_t 2148 1 firewire_core pcmcia_core 31212 4 yenta_socket,rsrc_nonstatic,ssb,pcmcia mii 4664 1 b44 intel_agp 22900 0 scsi_mod 131800 6 usb_storage,firewire_sbp2,sg,sr_mod,sd_mod,libata video 18044 0 output 2604 1 video agpgart 30836 2 drm,intel_agp usbcore 126004 4 usb_storage,uhci_hcd,ehci_hcd thermal 12580 0 fan 4044 0 thermal_sys 13140 4 processor,video,thermal,fan ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller [8086:2590] (rev 03) Subsystem: Dell Device [1028:0188] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:01.0 PCI bridge [0604]: Intel Corporation Mobile 915GM/PM Express PCI Express Root Port [8086:2591] (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: dfd00000-dfefffff Prefetchable memory behind bridge: d0000000-d7ffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver 00:1d.0 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 [8086:2658] (rev 03) (prog-if 00 [UHCI]) Subsystem: Dell Device [1028:0188] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at bf80 [size=32] Kernel driver in use: uhci_hcd 00:1d.1 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 [8086:2659] (rev 03) (prog-if 00 [UHCI]) Subsystem: Dell Device [1028:0188] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 17 Region 4: I/O ports at bf60 [size=32] Kernel driver in use: uhci_hcd 00:1d.2 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 [8086:265a] (rev 03) (prog-if 00 [UHCI]) Subsystem: Dell Device [1028:0188] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at bf40 [size=32] Kernel driver in use: uhci_hcd 00:1d.3 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 [8086:265b] (rev 03) (prog-if 00 [UHCI]) Subsystem: Dell Device [1028:0188] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 19 Region 4: I/O ports at bf20 [size=32] Kernel driver in use: uhci_hcd 00:1d.7 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller [8086:265c] (rev 03) (prog-if 20 [EHCI]) Subsystem: Dell Device [1028:0188] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at ffa80800 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev d3) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=03, subordinate=07, sec-latency=32 I/O behind bridge: 00002000-00002fff Memory behind bridge: dfc00000-dfcfffff Prefetchable memory behind bridge: 0000000088000000-000000008bffffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1e.2 Multimedia audio controller [0401]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller [8086:266e] (rev 03) Subsystem: Dell Inspiron 6000 laptop [1028:0188] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at ed00 [size=256] Region 1: I/O ports at ec40 [size=64] Region 2: Memory at dffffe00 (32-bit, non-prefetchable) [size=512] Region 3: Memory at dffffd00 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: Intel ICH 00:1e.3 Modem [0703]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem Controller [8086:266d] (rev 03) (prog-if 00 [Generic]) Subsystem: Conexant Systems, Inc. Device [14f1:5423] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 17 Region 0: I/O ports at ee00 [size=256] Region 1: I/O ports at ec80 [size=128] Capabilities: <access denied> Kernel driver in use: Intel ICH Modem 00:1f.0 ISA bridge [0601]: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge [8086:2641] (rev 03) Subsystem: Dell Device [1028:0188] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:1f.2 IDE interface [0101]: Intel Corporation 82801FBM (ICH6M) SATA Controller [8086:2653] (rev 03) (prog-if 80 [Master]) Subsystem: Dell Device [1028:0188] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 17 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at bfa0 [size=16] Capabilities: <access denied> Kernel driver in use: ata_piix 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc M22 [Mobility Radeon X300] [1002:5460] (prog-if 00 [VGA controller]) Subsystem: Dell Device [1028:2003] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M] Region 1: I/O ports at de00 [size=256] Region 2: Memory at dfdf0000 (32-bit, non-prefetchable) [size=64K] [virtual] Expansion ROM at dfd00000 [disabled] [size=128K] Capabilities: <access denied> 03:00.0 Ethernet controller [0200]: Broadcom Corporation BCM4401-B0 100Base-TX [14e4:170c] (rev 02) Subsystem: Dell Inspiron 6000 laptop [1028:0188] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Interrupt: pin A routed to IRQ 18 Region 0: Memory at dfcfe000 (32-bit, non-prefetchable) [size=8K] Capabilities: <access denied> Kernel driver in use: b44 03:01.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev b3) Subsystem: Dell Inspiron 6000 laptop [1028:0188] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 168 Interrupt: pin A routed to IRQ 19 Region 0: Memory at dfc00000 (32-bit, non-prefetchable) [size=4K] Bus: primary=03, secondary=04, subordinate=07, sec-latency=176 Memory window 0: 88000000-8bfff000 (prefetchable) Memory window 1: 8c000000-8ffff000 I/O window 0: 00002000-000020ff I/O window 1: 00002400-000024ff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001 Kernel driver in use: yenta_cardbus 03:01.1 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C552 IEEE 1394 Controller [1180:0552] (rev 08) (prog-if 10 [OHCI]) Subsystem: Dell Inspiron 6000 laptop [1028:0188] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (500ns min, 1000ns max) Interrupt: pin B routed to IRQ 18 Region 0: Memory at dfcfc800 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: firewire_ohci 03:01.2 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 17) (prog-if 01) Subsystem: Dell Inspiron 6000 laptop [1028:0188] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Interrupt: pin C routed to IRQ 17 Region 0: Memory at dfcfc700 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: sdhci-pci 03:03.0 Network controller [0280]: Intel Corporation PRO/Wireless 2200BG [Calexico2] Network Connection [8086:4220] (rev 05) Subsystem: Intel Corporation Dell Latitude D600 [8086:2722] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (750ns min, 6000ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 17 Region 0: Memory at dfcfd000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: ipw2200 -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.30-1-686 (SMP w/1 CPU core) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-2.6.30-1-686 depends on: ii debconf [debconf-2.0] 1.5.27 Debian configuration management sy ii initramfs-tools [linux-initra 0.93.4 tools for generating an initramfs ii module-init-tools 3.9-2 tools for managing Linux kernel mo Versions of packages linux-image-2.6.30-1-686 recommends: ii libc6-i686 2.9-23 GNU C Library: Shared libraries [i Versions of packages linux-image-2.6.30-1-686 suggests: ii grub 0.97-55 GRand Unified Bootloader (dummy pa ii grub-legacy [grub] 0.97-55 GRand Unified Bootloader (Legacy v pn linux-doc-2.6.30 <none> (no description available) -- debconf information excluded
--- End Message ---
--- Begin Message ---
- To: 541830-done@bugs.debian.org
- Subject: Re: Bug#541830: linux-image-2.6.30-1-686: Failed to load firmware "radeon/R300_cp.bin"
- From: Ben Hutchings <ben@decadent.org.uk>
- Date: Sun, 16 Aug 2009 18:31:08 +0100
- Message-id: <1250443868.21652.189.camel@localhost>
- In-reply-to: <[🔎] 20090816031550.8018.6324.reportbug@Inspiron-6000>
- References: <[🔎] 20090816031550.8018.6324.reportbug@Inspiron-6000>
On Sun, 2009-08-16 at 11:15 +0800, xueqianzhao wrote: > Package: linux-image-2.6.30-1-686 > Version: 2.6.30-5 > Severity: normal > > from dmesg, it shows: > radeon_cp: Failed to load firmware "radeon/R300_cp.bin" > [drm:radeon_do_init_cp] *ERROR* Failed to load firmware! > > my laptop's video card is ATI Mobility Radeon X300 > > when my kernel is 2.6.26, the radeon dri is fine and direct rendering is available.However, I upgraded the kernel several days ago, and the error message showed as above when booting and from X.Org.log, the rendering is disabled. > > I used "locate radeon" to search that bin file and can not find it. [...] This firmware is in the firmware-linux package (non-free). Removal of sourceless firmware to the non-free section is not a bug. Ben. -- Ben Hutchings Power corrupts. Absolute power is kind of neat. - John Lehman, Secretary of the US Navy 1981-1987Attachment: signature.asc
Description: This is a digitally signed message part
--- End Message ---