--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-2.6.25-2-vserver-686: ipv6 is disabled in the 2.6.25 vserver flavour of the kernel
- From: kaouete <kaouete@crazydwarves.org>
- Date: Sat, 05 Jul 2008 13:43:28 +0200
- Message-id: <20080705114328.16625.76695.reportbug@crazydwarves.org>
Package: linux-image-2.6.25-2-vserver-686
Version: 2.6.25-6~bpo40+1
Severity: important
Hello,
It looks like ipv6 is disabled in the vserver flavour of
linux-image-2.6.25-2.
I don't understand why it is, I can't find any information in the
changelog of the debian package, nor in the changelog of the vserver
patch.
Please enble it or provide some information on why it is disabled,
Thanks you
Victor
-- Package-specific info:
** Version:
Linux version 2.6.25-2-vserver-686 (Debian 2.6.25-6~bpo40+1) (nobse@debian.org) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 SMP Sat Jun 28 18:23:56 UTC 2008
** Command line:
root=/dev/hda4 ro
** Not tainted
** Kernel log:
[ 2.742503] ehci_hcd 0000:00:1d.7: debug port 1
[ 2.742588] PCI: cache line size of 128 is not supported by device 0000:00:1d.7
[ 2.742605] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf7000000
[ 2.746706] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 2.757607] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 2.757932] usb usb4: configuration #1 chosen from 1 choice
[ 2.758052] hub 4-0:1.0: USB hub found
[ 2.758140] hub 4-0:1.0: 6 ports detected
[ 2.861727] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.861823] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.861934] usb usb4: Product: EHCI Host Controller
[ 2.862014] usb usb4: Manufacturer: Linux 2.6.25-2-vserver-686 ehci_hcd
[ 2.862101] usb usb4: SerialNumber: 0000:00:1d.7
[ 2.862257] 8139cp 0000:02:0b.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
[ 2.862374] 8139cp 0000:02:0b.0: Try the "8139too" driver instead.
[ 2.862474] 8139cp 0000:02:0c.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
[ 2.862595] 8139cp 0000:02:0c.0: Try the "8139too" driver instead.
[ 2.862693] 8139cp 0000:02:0d.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
[ 2.862815] 8139cp 0000:02:0d.0: Try the "8139too" driver instead.
[ 2.866361] 8139too Fast Ethernet driver 0.9.28
[ 2.866466] ACPI: PCI Interrupt 0000:02:0b.0[A] -> GSI 23 (level, low) -> IRQ 23
[ 2.867410] eth0: RealTek RTL8139 at 0xb800, 00:50:fc:46:63:1d, IRQ 23
[ 2.867482] eth0: Identified 8139 chip type 'RTL-8139C'
[ 2.867502] ACPI: PCI Interrupt 0000:02:0c.0[A] -> GSI 20 (level, low) -> IRQ 20
[ 2.868421] eth1: RealTek RTL8139 at 0xb400, 00:50:fc:46:63:1b, IRQ 20
[ 2.868505] eth1: Identified 8139 chip type 'RTL-8139C'
[ 2.868523] ACPI: PCI Interrupt 0000:02:0d.0[A] -> GSI 21 (level, low) -> IRQ 21
[ 2.869501] eth2: RealTek RTL8139 at 0xb000, 00:50:fc:46:63:1f, IRQ 21
[ 2.869579] eth2: Identified 8139 chip type 'RTL-8139C'
[ 2.873824] ICH4: IDE controller (0x8086:0x24cb rev 0x02) at PCI slot 0000:00:1f.1
[ 2.873951] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[ 2.874111] ICH4: not 100% native mode: will probe irqs later
[ 2.874210] ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:PIO
[ 2.874373] ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:PIO
[ 2.874535] Probing IDE interface ide0...
[ 3.163153] hda: WDC WD400BB-00DKA0, ATA DISK drive
[ 3.836809] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 3.836809] hda: UDMA/100 mode selected
[ 3.836809] Probing IDE interface ide1...
[ 4.124131] hdc: Maxtor 6B160P0, ATA DISK drive
[ 4.795543] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 4.795543] hdc: UDMA/100 mode selected
[ 4.795543] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 4.795543] ide1 at 0x170-0x177,0x376 on irq 15
[ 4.800236] No dock devices found.
[ 4.814544] SCSI subsystem initialized
[ 4.832783] libata version 3.00 loaded.
[ 4.870874] hda: max request size: 512KiB
[ 4.883423] hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=16383/255/63
[ 4.884706] hda: cache flushes supported
[ 4.884706] hda: hda1 hda2 hda3 hda4
[ 4.901786] hdc: max request size: 512KiB
[ 4.925448] hdc: 320173056 sectors (163928 MB) w/8192KiB Cache, CHS=19929/255/63
[ 4.926995] hdc: cache flushes supported
[ 4.926995] hdc: hdc1
[ 5.548780] PM: Starting manual resume from disk
[ 5.613484] kjournald starting. Commit interval 5 seconds
[ 5.613484] EXT3-fs: mounted filesystem with ordered data mode.
[ 8.777911] hdc: UDMA/100 mode selected
[ 8.811668] hda: UDMA/100 mode selected
[ 9.001777] input: PC Speaker as /class/input/input0
[ 9.576359] Real Time Clock Driver v1.12ac
[ 9.718296] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[ 9.718484] iTCO_wdt: Found a ICH4 TCO device (Version=1, TCOBASE=0xe460)
[ 9.718607] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 9.850042] parport_pc 00:08: reported by Plug and Play ACPI
[ 9.851137] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[ 9.887259] Linux agpgart interface v0.103
[ 9.923298] agpgart: Detected an Intel 830M Chipset.
[ 9.927348] agpgart: AGP aperture is 64M @ 0xf8000000
[ 9.953702] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 9.987397] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 10.195181] intel_rng: FWH not detected
[ 10.243395] input: Power Button (FF) as /class/input/input1
[ 10.255158] ACPI: Power Button (FF) [PWRF]
[ 10.255379] input: Power Button (CM) as /class/input/input2
[ 10.271131] ACPI: Power Button (CM) [PWRB]
[ 10.297629] ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17
[ 11.638160] hda: UDMA/100 mode selected
[ 11.651283] hdc: UDMA/100 mode selected
[ 11.734881] Adding 498004k swap on /dev/hda2. Priority:-1 extents:1 across:498004k
[ 224.454335] EXT3 FS on hda4, internal journal
[ 225.415779] usbcore: registered new interface driver usblp
[ 225.603481] device-mapper: uevent: version 1.0.3
[ 225.605425] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
[ 662.334364] kjournald starting. Commit interval 5 seconds
[ 662.339629] EXT3 FS on hda3, internal journal
[ 662.339629] EXT3-fs: mounted filesystem with ordered data mode.
[ 662.377096] kjournald starting. Commit interval 5 seconds
[ 662.381981] EXT3 FS on hdc1, internal journal
[ 662.382027] EXT3-fs: mounted filesystem with ordered data mode.
[ 666.514364] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 666.667081] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 667.196613] eth2: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 677.023399] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 678.564039] Netfilter messages via NETLINK v0.30.
[ 678.604521] nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
[ 678.967761] ctnetlink v0.93: registering with nfnetlink.
[ 679.238436] ClusterIP Version 0.8 loaded successfully
[ 716.865804] warning: `pure-ftpd' uses 32-bit capabilities (legacy support in use)
** Loaded modules:
Module Size Used by
ac 4512 0
battery 8576 0
iptable_raw 3008 0
xt_comment 1920 0
xt_policy 3168 0
ipt_ULOG 8932 23
ipt_TTL 2368 0
ipt_ttl 1952 0
ipt_REJECT 3968 4
ipt_REDIRECT 2176 0
ipt_recent 8956 0
ipt_NETMAP 2144 0
ipt_MASQUERADE 3840 4
ipt_LOG 5892 0
ipt_ECN 2944 0
ipt_ecn 2304 0
ipt_CLUSTERIP 8260 0
ipt_ah 1984 0
ipt_addrtype 2784 4
nf_nat_tftp 1984 0
nf_nat_snmp_basic 9480 0
nf_nat_sip 4480 0
nf_nat_pptp 3712 0
nf_nat_proto_gre 2916 1 nf_nat_pptp
nf_nat_irc 2848 0
nf_nat_h323 7200 0
nf_nat_ftp 3296 0
nf_nat_amanda 2496 0
ts_kmp 2176 5
nf_conntrack_amanda 5152 1 nf_nat_amanda
nf_conntrack_tftp 5172 1 nf_nat_tftp
nf_conntrack_sip 8980 1 nf_nat_sip
nf_conntrack_proto_sctp 8104 0
nf_conntrack_pptp 6884 1 nf_nat_pptp
nf_conntrack_proto_gre 6048 1 nf_conntrack_pptp
nf_conntrack_netlink 18208 0
nf_conntrack_netbios_ns 3040 0
nf_conntrack_irc 6844 1 nf_nat_irc
nf_conntrack_h323 47016 1 nf_nat_h323
nf_conntrack_ftp 8964 1 nf_nat_ftp
xt_tcpmss 2304 0
xt_pkttype 2016 0
xt_physdev 2704 0
xt_owner 2880 0
xt_NFQUEUE 2048 0
xt_NFLOG 2144 0
xt_multiport 3200 8
xt_MARK 2656 0
xt_mark 2208 0
xt_mac 1984 0
xt_limit 2724 0
xt_length 2048 0
xt_iprange 2560 0
xt_helper 2720 0
xt_hashlimit 10640 0
xt_DSCP 3520 0
xt_dscp 2720 0
xt_dccp 3368 0
xt_conntrack 4064 3
xt_CONNMARK 3808 0
xt_connmark 2848 0
xt_CLASSIFY 1952 0
xt_tcpudp 3200 109
xt_state 2560 46
iptable_nat 6824 1
nf_nat 18456 13 ipt_REDIRECT,ipt_NETMAP,ipt_MASQUERADE,nf_nat_tftp,nf_nat_sip,nf_nat_pptp,nf_nat_proto_gre,nf_nat_irc,nf_nat_h323,nf_nat_ftp,nf_nat_amanda,nf_conntrack_netlink,iptable_nat
nf_conntrack_ipv4 16808 52 iptable_nat,nf_nat
nf_conntrack 60116 29 ipt_MASQUERADE,ipt_CLUSTERIP,nf_nat_tftp,nf_nat_snmp_basic,nf_nat_sip,nf_nat_pptp,nf_nat_irc,nf_nat_h323,nf_nat_ftp,nf_nat_amanda,nf_conntrack_amanda,nf_conntrack_tftp,nf_conntrack_sip,nf_conntrack_proto_sctp,nf_conntrack_pptp,nf_conntrack_proto_gre,nf_conntrack_netlink,nf_conntrack_netbios_ns,nf_conntrack_irc,nf_conntrack_h323,nf_conntrack_ftp,xt_helper,xt_conntrack,xt_CONNMARK,xt_connmark,xt_state,iptable_nat,nf_nat,nf_conntrack_ipv4
iptable_mangle 3392 1
nfnetlink 4952 1 nf_conntrack_netlink
iptable_filter 3552 1
ip_tables 13328 4 iptable_raw,iptable_nat,iptable_mangle,iptable_filter
x_tables 15844 42 xt_comment,xt_policy,ipt_ULOG,ipt_TTL,ipt_ttl,ipt_REJECT,ipt_REDIRECT,ipt_recent,ipt_NETMAP,ipt_MASQUERADE,ipt_LOG,ipt_ECN,ipt_ecn,ipt_CLUSTERIP,ipt_ah,ipt_addrtype,xt_tcpmss,xt_pkttype,xt_physdev,xt_owner,xt_NFQUEUE,xt_NFLOG,xt_multiport,xt_MARK,xt_mark,xt_mac,xt_limit,xt_length,xt_iprange,xt_helper,xt_hashlimit,xt_DSCP,xt_dscp,xt_dccp,xt_conntrack,xt_CONNMARK,xt_connmark,xt_CLASSIFY,xt_tcpudp,xt_state,iptable_nat,ip_tables
dummy 3488 0
dm_crypt 14884 0
crypto_blkcipher 18308 1 dm_crypt
dm_snapshot 17540 0
dm_mirror 25508 0
dm_mod 56264 3 dm_crypt,dm_snapshot,dm_mirror
usblp 13824 0
evdev 11456 2
analog 11648 0
i2c_i801 9648 0
button 8336 0
rng_core 4996 0
i2c_core 22836 1 i2c_i801
shpchp 29972 0
pci_hotplug 27172 1 shpchp
intel_agp 25276 1
agpgart 31912 1 intel_agp
parport_pc 26020 0
parport 34092 1 parport_pc
iTCO_wdt 11396 0
gameport 14316 1 analog
rtc 14368 0
pcspkr 3264 0
ext3 123528 3
jbd 43668 1 ext3
mbcache 8484 1 ext3
ide_disk 14080 6
ata_generic 8100 0
libata 142384 1 ata_generic
scsi_mod 138988 1 libata
dock 10576 1 libata
piix 7272 0 [permanent]
8139too 25376 0
8139cp 21472 0
mii 5280 2 8139too,8139cp
ide_pci_generic 4324 0 [permanent]
ide_core 100664 3 ide_disk,piix,ide_pci_generic
ehci_hcd 32684 0
uhci_hcd 22544 0
usbcore 130096 4 usblp,ehci_hcd,uhci_hcd
thermal 19164 0
processor 39980 1 thermal
fan 5732 0
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface [8086:2560] (rev 02)
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:80b2]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M]
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE Host-to-AGP Bridge [8086:2561] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
00:1d.0 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 [8086:24c2] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:8089]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at d800 [size=32]
00:1d.1 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 [8086:24c4] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:8089]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at d400 [size=32]
00:1d.2 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 [8086:24c7] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:8089]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at d000 [size=32]
00:1d.7 USB Controller [0c03]: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller [8086:24cd] (rev 02) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:8089]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin D routed to IRQ 23
Region 0: Memory at f7000000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 82) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR+
Latency: 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: f4800000-f6ffffff
Prefetchable memory behind bridge: f7f00000-f7ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA+ MAbort- >Reset- FastB2B-
00:1f.0 ISA bridge [0601]: Intel Corporation 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge [8086:24c0] (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:1f.1 IDE interface [0101]: Intel Corporation 82801DB (ICH4) IDE Controller [8086:24cb] (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:8089]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at f000 [size=16]
Region 5: Memory at 30000000 (32-bit, non-prefetchable) [size=1K]
00:1f.3 SMBus [0c05]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller [8086:24c3] (rev 02)
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:8089]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at e800 [size=32]
02:09.0 VGA compatible controller [0300]: ATI Technologies Inc 215CT [Mach64 CT] [1002:4354] (rev 41) (prog-if 00 [VGA])
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop+ ParErr- Stepping+ SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Region 0: Memory at f6000000 (32-bit, non-prefetchable) [size=16M]
Expansion ROM at f7ff0000 [disabled] [size=64K]
02:0b.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RT8139 [10ec:8139]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 23
Region 0: I/O ports at b800 [size=256]
Region 1: Memory at f5800000 (32-bit, non-prefetchable) [size=256]
[virtual] Expansion ROM at f7f00000 [disabled] [size=64K]
02:0c.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RT8139 [10ec:8139]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 20
Region 0: I/O ports at b400 [size=256]
Region 1: Memory at f5000000 (32-bit, non-prefetchable) [size=256]
[virtual] Expansion ROM at f7f10000 [disabled] [size=64K]
02:0d.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RT8139 [10ec:8139]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 21
Region 0: I/O ports at b000 [size=256]
Region 1: Memory at f4800000 (32-bit, non-prefetchable) [size=256]
[virtual] Expansion ROM at f7f20000 [disabled] [size=64K]
-- System Information:
Debian Release: 4.0
APT prefers proposed-updates
APT policy: (991, 'proposed-updates'), (990, 'stable'), (450, 'testing')
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.25-2-vserver-686
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8)
Versions of packages linux-image-2.6.25-2-vserver-686 depends on:
ii debconf [debconf-2.0] 1.5.11etch2 Debian configuration management sy
ii initramfs-tools [linux-ini 0.92a~bpo40+1 tools for generating an initramfs
ii module-init-tools 3.3-pre4-2 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.25-2-vserver-686 recommends:
ii libc6-i686 2.3.6.ds1-13etch7 GNU C Library: Shared libraries [i
-- debconf information:
linux-image-2.6.25-2-vserver-686/preinst/abort-overwrite-2.6.25-2-vserver-686:
linux-image-2.6.25-2-vserver-686/postinst/old-dir-initrd-link-2.6.25-2-vserver-686: true
linux-image-2.6.25-2-vserver-686/preinst/bootloader-initrd-2.6.25-2-vserver-686: true
linux-image-2.6.25-2-vserver-686/preinst/failed-to-move-modules-2.6.25-2-vserver-686:
linux-image-2.6.25-2-vserver-686/postinst/depmod-error-2.6.25-2-vserver-686: false
linux-image-2.6.25-2-vserver-686/preinst/elilo-initrd-2.6.25-2-vserver-686: true
linux-image-2.6.25-2-vserver-686/postinst/bootloader-test-error-2.6.25-2-vserver-686:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.25-2-vserver-686/prerm/would-invalidate-boot-loader-2.6.25-2-vserver-686: true
linux-image-2.6.25-2-vserver-686/postinst/old-system-map-link-2.6.25-2-vserver-686: true
linux-image-2.6.25-2-vserver-686/postinst/kimage-is-a-directory:
linux-image-2.6.25-2-vserver-686/postinst/bootloader-error-2.6.25-2-vserver-686:
linux-image-2.6.25-2-vserver-686/postinst/create-kimage-link-2.6.25-2-vserver-686: true
linux-image-2.6.25-2-vserver-686/preinst/abort-install-2.6.25-2-vserver-686:
linux-image-2.6.25-2-vserver-686/preinst/overwriting-modules-2.6.25-2-vserver-686: true
linux-image-2.6.25-2-vserver-686/preinst/lilo-initrd-2.6.25-2-vserver-686: true
linux-image-2.6.25-2-vserver-686/prerm/removing-running-kernel-2.6.25-2-vserver-686: true
linux-image-2.6.25-2-vserver-686/preinst/lilo-has-ramdisk:
linux-image-2.6.25-2-vserver-686/postinst/depmod-error-initrd-2.6.25-2-vserver-686: false
linux-image-2.6.25-2-vserver-686/postinst/old-initrd-link-2.6.25-2-vserver-686: true
linux-image-2.6.25-2-vserver-686/preinst/initrd-2.6.25-2-vserver-686:
--- End Message ---