[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#458416: marked as done ([sparc sun blade 100] oops during installation)

Your message dated Fri, 14 Aug 2009 20:23:39 +0200
with message-id <20090814182338.GA22863@galadriel.inutil.org>
and subject line Re: Bug#458416: Installation report latest lenny on SPARC
has caused the Debian Bug report #458416,
regarding [sparc sun blade 100] oops during installation
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
458416: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=458416
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message --- 
Package: installation-reports

Boot method: CD
Image version:
http://cdimage.debian.org/cdimage/daily-builds/daily/arch-latest/sparc/iso-cd/debian-testing-sparc-netinst.iso
Date: Mon Dec 31 03:28:54 GMT 2007

Machine: Sun Blade 100
Processor: UltraSPARC-IIe
Memory: 2048 MB
Partitions:
(from 2.6.18 based etch installation)
surprise:/home/test# df -Tl
Filesystem    Type   1K-blocks      Used Available Use% Mounted on
/dev/mapper/surprise.zathras.org-root
              ext3    73651440   2924516  66985640   5% /
tmpfs        tmpfs     1037512         0   1037512   0% /lib/init/rw
udev         tmpfs       10240        64     10176   1% /dev
tmpfs        tmpfs     1037512         0   1037512   0% /dev/shm
/dev/hda1     ext3       93335     21835     66681  25% /boot


Output of lspci -nn and lspci -vnn:

urprise:/home/test# lspci -nn
00:00.0 Host bridge [0600]: Sun Microsystems Computer Corp. Ultra IIe
[108e:a001]
00:03.0 Non-VGA unclassified device [0000]: ALi Corporation M7101 Power
Management Controller [PMU] [10b9:7101]
00:05.0 PCI bridge [0604]: Digital Equipment Corporation DECchip 21152
[1011:0024] (rev 03)
00:07.0 ISA bridge [0601]: ALi Corporation M1533/M1535 PCI to ISA Bridge
[Aladdin IV/V/V+] [10b9:1533]
00:08.0 Multimedia audio controller [0401]: ALi Corporation M5451 PCI
AC-Link Controller Audio Device [10b9:5451] (rev 01)
00:0c.0 Bridge [0680]: Sun Microsystems Computer Corp. RIO EBUS
[108e:1100] (rev 01)
00:0c.1 Ethernet controller [0200]: Sun Microsystems Computer Corp. RIO
GEM [108e:1101] (rev 01)
00:0c.2 FireWire (IEEE 1394) [0c00]: Sun Microsystems Computer Corp. RIO
1394 [108e:1102] (rev 01)
00:0c.3 USB Controller [0c03]: Sun Microsystems Computer Corp. RIO USB
[108e:1103] (rev 01)
00:0d.0 IDE interface [0101]: ALi Corporation M5229 IDE [10b9:5229] (rev c3)
00:13.0 VGA compatible controller [0300]: ATI Technologies Inc Rage XL
[1002:4752] (rev 27)


surprise:/home/test# lspci -vnn
00:00.0 Host bridge [0600]: Sun Microsystems Computer Corp. Ultra IIe
[108e:a001]
        Flags: bus master, 66MHz, medium devsel, latency 40, IRQ 1

00:03.0 Non-VGA unclassified device [0000]: ALi Corporation M7101 Power
Management Controller [PMU] [10b9:7101]
        Flags: medium devsel

00:05.0 PCI bridge [0604]: Digital Equipment Corporation DECchip 21152
[1011:0024] (rev 03) (prog-if 00 [Normal decode])
        Flags: bus master, medium devsel, latency 64
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
        Capabilities: [dc] Power Management version 1

00:07.0 ISA bridge [0601]: ALi Corporation M1533/M1535 PCI to ISA Bridge
[Aladdin IV/V/V+] [10b9:1533]
        Subsystem: ALi Corporation ALi M1533 Aladdin IV/V ISA Bridge
[10b9:1533]
        Flags: bus master, medium devsel, latency 0
        Capabilities: [a0] Power Management version 1

00:08.0 Multimedia audio controller [0401]: ALi Corporation M5451 PCI
AC-Link Controller Audio Device [10b9:5451] (rev 01)
        Subsystem: ALi Corporation HP Compaq nc4010 (DY885AA#ABN)
[10b9:5451]
        Flags: bus master, medium devsel, latency 64, IRQ 14
        I/O ports at 1fe02000900 [size=256]
        Memory at 1ff00424000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [dc] Power Management version 2

00:0c.0 Bridge [0680]: Sun Microsystems Computer Corp. RIO EBUS
[108e:1100] (rev 01)
        Flags: bus master, medium devsel, latency 64
        BIST result: 00
        Memory at 1fff0000000 (32-bit, non-prefetchable) [size=16M]
        Memory at 1fff1000000 (32-bit, non-prefetchable) [size=8M]
        Expansion ROM at 1ff04000000 [disabled] [size=16M]

00:0c.1 Ethernet controller [0200]: Sun Microsystems Computer Corp. RIO
GEM [108e:1101] (rev 01)
        Flags: bus master, medium devsel, latency 64, IRQ 11
        BIST result: 00
        Memory at 1ff00400000 (32-bit, non-prefetchable) [size=128K]
        [virtual] Expansion ROM at 1ff00800000 [disabled] [size=16M]

00:0c.2 FireWire (IEEE 1394) [0c00]: Sun Microsystems Computer Corp. RIO
1394 [108e:1102] (rev 01) (prog-if 10 [OHCI])
        Flags: bus master, medium devsel, latency 64, IRQ 12
        BIST result: 00
        Memory at 1ff00420000 (32-bit, non-prefetchable) [size=2K]
        Memory at 1ff00422000 (32-bit, non-prefetchable) [size=2K]
        Expansion ROM at 1ff05000000 [disabled] [size=16M]

00:0c.3 USB Controller [0c03]: Sun Microsystems Computer Corp. RIO USB
[108e:1103] (rev 01) (prog-if 10 [OHCI])
        Flags: bus master, medium devsel, latency 64, IRQ 13
        BIST result: 00
        Memory at 1ff02000000 (32-bit, non-prefetchable) [size=32K]
        Expansion ROM at 1ff06000000 [disabled] [size=16M]

00:0d.0 IDE interface [0101]: ALi Corporation M5229 IDE [10b9:5229] (rev
c3) (prog-if ff)
        Flags: bus master, medium devsel, latency 64, IRQ 15
        I/O ports at 1fe02000a00 [size=8]
        I/O ports at 1fe02000a18 [size=4]
        I/O ports at 1fe02000a10 [size=8]
        I/O ports at 1fe02000a08 [size=4]
        I/O ports at 1fe02000a20 [size=16]
        Capabilities: [60] Power Management version 2

00:13.0 VGA compatible controller [0300]: ATI Technologies Inc Rage XL
[1002:4752] (rev 27) (prog-if 00 [VGA])
        Flags: bus master, stepping, medium devsel, latency 64, IRQ 16
        Memory at 1ff03000000 (32-bit, non-prefetchable) [size=16M]
        I/O ports at 1fe02000b00 [size=256]
        Memory at 1ff00426000 (32-bit, non-prefetchable) [size=4K]
        Expansion ROM at 1ff00440000 [disabled] [size=128K]
        Capabilities: [5c] Power Management version 2


Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot:           [ E ]
Detect network card:    [ ]
Configure network:      [ ]
Detect CD:              [ ]
Load installer modules: [ ]
Detect hard drives:     [ [
Partition hard drives:  [ ]
Install base system:    [ ]
Clock/timezone setup:   [ ]
User/password setup:    [ ]
Install tasks:          [ ]
Install boot loader:    [ ]
Overall install:        [ ]

Comments/Problems:

boot starts and the install hangs with

"Booting Linux".

Booting with the command

install -p ide=nodma video=atyfb DEBIAN_FRONTEND=text
produces the following output.


                  Welcome to Debian GNU/Linux lenny!

This is a Debian installation CDROM, built on 20071230-09:26.

                  Welcome to Debian GNU/Linux lenny!

This is a Debian installation CDROM, built on 20071230-09:26.
Keep it once you have installed your system, as you can boot from it
to repair the system on your hard disk if that ever becomes necessary.

WARNING: You should completely back up all of your hard disks before
  proceeding. The installation procedure can completely and irreversibly
  erase them! If you haven't made backups yet, remove the rescue CD from
  the drive and press L1-A to get back to the OpenBoot prompt.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted
by applicable law.

[ ENTER - Boot install ]   [ Type "expert" - Boot into expert mode ]
                           [ Type "rescue" - Boot into rescue mode ]
boot: install -p ide=nodma video=atyfb DEBIAN_FRONTEND=text
Allocated 8 Megs of memory at 0x40000000 for kernel
Loaded kernel version 2.6.22
Loading initial ramdisk (4120601 bytes at 0x7F800000 phys, 0x40C00000
virt)...
\
PROMLIB: Sun IEEE Boot Prom 'OBP 4.17.1 2005/04/11 14:31'
PROMLIB: Root node compatible:
Linux version 2.6.22-3-sparc64 (Debian 2.6.22-6) (maks@debian.org) (gcc
version 4.1.3 20070831 (prerelease) (Debian 4.1.2-16)) #1 M7
ARCH: SUN4U
Ethernet address: 00:03:ba:08:46:e0
Remapping the kernel... done.
PROM: Built device tree with 68581 bytes of memory.
Booting Linux...
Built 1 zonelists.  Total pages: 259770
Kernel command line: cdrom -p ide=nodma video=atyfb DEBIAN_FRONTEND=text
ide_setup: ide=nodma : Prevented DMA
PID hash table entries: 4096 (order: 12, 32768 bytes)
clocksource: mult[b40001] shift[16]
clockevent: mult[16c16bf] shift[32]
Console: colour dummy device 80x25
Dentry cache hash table entries: 262144 (order: 8, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 7, 1048576 bytes)
Memory: 2070072k available (2392k kernel code, 840k data, 152k init)
[fffff80000000000,000000007ff06000]
Calibrating delay using timer specific routine.. 11.09 BogoMIPS (lpj=22194)
Security Framework v1.0.0 initialized
SELinux:  Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
NET: Registered protocol family 16
PCI: Probing for controllers.
/pci@1f,0: SABRE PCI Bus Module
/pci@1f,0: PCI IO[1fe02000000] MEM[1ff00000000]
PCI: Scanning PBM /pci@1f,0
PCI quirk: region 0800-083f claimed by ali7101 ACPI
PCI quirk: region 0600-061f claimed by ali7101 SMB
PCI quirk: region 0800-083f claimed by ali7101 ACPI
PCI quirk: region 0600-061f claimed by ali7101 SMB
kobject_add failed for 0000:00:07.0 with -EEXIST, don't try to register
things with the same name in the same directory.
Call Trace:
 [0000000000597c3c] device_add+0x88/0x518
 [0000000000536e28] pci_bus_add_device+0x10/0x6c
 [0000000000536ea4] pci_bus_add_devices+0x20/0x14c
 [000000000043485c] pci_scan_one_pbm+0xa4/0xb4
 [000000000043cff8] sabre_scan_bus+0x54/0x270
 [000000000073c2f0] pcibios_init+0x64/0x90
 [00000000007341e8] kernel_init+0xb8/0x258
 [00000000004277f8] kernel_thread+0x38/0x48
 [0000000000657230] rest_init+0x18/0x50
pci 0000:00:07.0: Error adding device, continuing
kobject_add failed for 0000:00:03.0 with -EEXIST, don't try to register
things with the same name in the same directory.
Call Trace:
 [0000000000597c3c] device_add+0x88/0x518
 [0000000000536e28] pci_bus_add_device+0x10/0x6c
 [0000000000536ea4] pci_bus_add_devices+0x20/0x14c
 [000000000043485c] pci_scan_one_pbm+0xa4/0xb4
 [000000000043cff8] sabre_scan_bus+0x54/0x270
 [000000000073c2f0] pcibios_init+0x64/0x90
 [00000000007341e8] kernel_init+0xb8/0x258
 [00000000004277f8] kernel_thread+0x38/0x48
 [0000000000657230] rest_init+0x18/0x50
pci 0000:00:03.0: Error adding device, continuing
kernel BUG at drivers/pci/bus.c:127!
              \|/ ____ \|/
              "@'/ .. \`@"
              /_| \__/ |_\
                 \__U_/
swapper(1): Kernel bad sw trap 5 [#1]
TSTATE: 0000000080001600 TPC: 0000000000536f1c TNPC: 0000000000536f20 Y:
00000000    Not tainted
TPC: <pci_bus_add_devices+0x98/0x14c>
g0: 0000000000000000 g1: 0000000000000001 g2: 00000000006fa800 g3:
00000000006faa18
g4: fffff8007fed1860 g5: 0000000000000000 g6: fffff8007eff8000 g7:
0000000000000000
o0: 0000000000000028 o1: 00000000006b8f20 o2: 000000000000007f o3:
0000000000000001
o4: 0000000003f00000 o5: fffff8007fe014a8 sp: fffff8007effb2a1 ret_pc:
0000000000536f14
RPC: <pci_bus_add_devices+0x90/0x14c>
l0: fffff80001173cb8 l1: fffff80001173cc8 l2: 0000000000000001 l3:
0000000000703400
l4: fffff8007fe01000 l5: fffff80001173aa0 l6: 0000000000000000 l7:
0000000000000028
i0: fffff8000117d000 i1: fffff80000e0ef80 i2: fffff80001173ca0 i3:
0000000000000000
i4: 0000000000000001 i5: 000000000070dca8 i6: fffff8007effb361 i7:
000000000043485c
I7: <pci_scan_one_pbm+0xa4/0xb4>
Caller[000000000043485c]: pci_scan_one_pbm+0xa4/0xb4
Caller[000000000043cff8]: sabre_scan_bus+0x54/0x270
Caller[000000000073c2f0]: pcibios_init+0x64/0x90
Caller[00000000007341e8]: kernel_init+0xb8/0x258
Caller[00000000004277f8]: kernel_thread+0x38/0x48
Caller[0000000000657230]: rest_init+0x18/0x50
Instruction DUMP: 9210207f  7ffbcd41  90122320 <91d02005> 22c08025
c25e2010  c2588000  80a04002  1268000e
Kernel panic - not syncing: Attempted to kill init!
21

--- End Message ---
--- Begin Message --- 
On Sat, Dec 27, 2008 at 02:24:23PM +0100, Moritz Muehlenhoff wrote:
> On Mon, Dec 31, 2007 at 02:48:13PM +0100, Frans Pop wrote:
> > 
> > On Monday 31 December 2007, Iain Rae wrote:
> > > kobject_add failed for 0000:00:07.0 with -EEXIST, don't try to register
> > > things with the same name in the same directory.
> > [...]
> > 
> > Although I think this particular error could be ignored, the kernel oops a 
> > bit later is probably what kills the install.
> > 
> > As this is obviously a kernel issue rather than an installer issue, I'd 
> > suggest that you send this info to the upstream kernel developers (mail 
> > to sparclinux@vger.kernel.org, CC linux-kernel@vger.kernel.org; or file a 
> > bug report at bugzilla.kernel.org). Just the dmesg output should be 
> > enough.
> > 
> > I'm also reassigning this report to the Debian kernel team, but your best 
> > bet to get this issue looked into and solved is to contact the upstream 
> > developers directly.
> > Note that they may ask you to try with a more recent kernel than 2.6.22.
> > 
> > One thing you could try before doing that is to try an installation using 
> > a netboot image. Sun blades have been notoriously problematic to install 
> > from CD.
> 
> Iain, does this error still occur with more recent kernel versions?

No further feedback, closing the bug.

If anyone reencounters the problem, please reopen this bug.

Cheers,
        Moritz

--- End Message ---
Reply to: