Bug#430887: closed by Moritz Muehlenhoff <jmm@inutil.org> (Re: Bug#430887: installation-report: Headphones and microphone does not work)
Hello there!
Thanks for closing.
I must review my opened bugs.
this was a bug in the kernel from etch and it was resolved with a more
recent kernel, but it was tested a *lot* of time since the BR, because
that laptop remained with etch.
best regards,
Luis Matos
Seg, 2009-08-03 às 17:57 +0000, Debian Bug Tracking System escreveu:
> This is an automatic notification regarding your Bug report
> which was filed against the linux-2.6 package:
>
> #430887: Intel 82801G (ICH7) HDA [8086:27d8] headset and mic problem
>
> It has been closed by Moritz Muehlenhoff <jmm@inutil.org>.
>
> Their explanation is attached below along with your original report.
> If this explanation is unsatisfactory and you have not received a
> better one in a separate message then please contact Moritz Muehlenhoff <jmm@inutil.org> by
> replying to this email.
>
>
> anexo mensagem de e-mail
> > ------ Mensagem Reencaminhada ------
> > De: Moritz Muehlenhoff <jmm@inutil.org>
> > Para: Luis Matos <gass@otiliamatos.ath.cx>
> > Cc: 430887-done@bugs.debian.org
> > Assunto: Re: Bug#430887: installation-report: Headphones and
> > microphone does not work
> > Data: Mon, 3 Aug 2009 19:43:03 +0200
> >
> > On Fri, Dec 26, 2008 at 12:08:24AM +0100, Moritz Muehlenhoff wrote:
> > > On Thu, Jun 28, 2007 at 01:39:02AM +0100, Luis Matos wrote:
> > > > Qua, 2007-06-27 às 20:28 -0300, Otavio Salvador escreveu:
> > > > > reassign 430887 linux-2.6
> > > > > retitle 430887 Intel 82801G (ICH7) HDA [8086:27d8] headset and mic problem
> > > > > thanks
> > > > >
> > > > > Luis Matos <gass@otiliamatos.ath.cx> writes:
> > > > >
> > > > > > My SoundCard does not work properly. It outputs sound trough the
> > > > > > speaks, but fails to move to the headphones and the incorporated
> > > > > > microphones also don't work.
> > > > >
> > > > > Hello Luis,
> > > > hello there
> > > > >
> > > > > This is clearly a kernel issue and not an installer issue so I've
> > > > > moved it to linux-2.6 package.
> > > > >
> > > > i didn't knew here to put it, so i send it to installation-reports so
> > > > you could fit them in the right place.
> > >
> > > Does this error still occur with more recent kernel versions?
> >
> > No further feedback, closing the bug.
> >
> > Cheers,
> > Moritz
> >
> anexo mensagem de e-mail
> > ------ Mensagem Reencaminhada ------
> > De: Luis Matos <gass@otiliamatos.ath.cx>
> > Para: submit@bugs.debian.org
> > Assunto: installation-report: Headphones and microphone does not
> > work
> > Data: Thu, 28 Jun 2007 01:12:21 +0100
> >
> > Package: installation-reports
> > Version: 2.29
> > Severity: normal
> >
> > *** Please type your report below this line ***
> >
> >
> > -- Package-specific info:
> >
> > Boot method: CD
> > Image version: cdimage.debian.org
> > Date: March 2007
> >
> > Machine: HP Pavillion dv6130ea Laptop
> > Partitions: <df -Tl will do; the raw partition table is preferred>
> >
> >
> > Base System Installation Checklist:
> > [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
> >
> > Initial boot: [o]
> > Detect network card: [o]
> > Configure network: [o]
> > Detect CD: [o]
> > Load installer modules: [o]
> > Detect hard drives: [o]
> > Partition hard drives: [o]
> > Install base system: [o]
> > Clock/timezone setup: [o]
> > User/password setup: [o]
> > Install tasks: [o]
> > Install boot loader: [o]
> > Overall install: [o]
> >
> > Comments/Problems:
> >
> > My SoundCard does not work properly. It outputs sound trough the
> > speaks, but fails to move to the headphones and the incorporated
> > microphones also don't work.
> >
> >
> >
> > --
> >
> > Please make sure that the hardware-summary log file, and any other
> > installation logs that you think would be useful are attached to this
> > report. Please compress large files using gzip.
> >
> > Once you have filled out this report, mail it to submit@bugs.debian.org.
> >
> > ==============================================
> > Installer lsb-release:
> > ==============================================
> > DISTRIB_ID=Debian
> > DISTRIB_DESCRIPTION="Debian GNU/Linux installer"
> > DISTRIB_RELEASE="4.0 (installer build 20070127-03:50)"
> > X_INSTALLATION_MEDIUM=cdrom
> >
> > ==============================================
> > Installer hardware-summary:
> > ==============================================
> > umame -a: Linux portatel 2.6.18-3-486 #1 Sun Dec 10 18:57:11 UTC 2006
> > i686 unknown
> > lspci -nn: 00:00.0 Host bridge [0600]: Intel Corporation Mobile
> > 945GM/PM/GMS/940GML and 945GT Express Memory Controller Hub [8086:27a0]
> > (rev 03)
> > lspci -nn: 00:02.0 VGA compatible controller [0300]: Intel Corporation
> > Mobile 945GM/GMS/940GML Express Integrated Graphics Controller
> > [8086:27a2] (rev 03)
> > lspci -nn: 00:02.1 Display controller [0380]: Intel Corporation Mobile
> > 945GM/GMS/940GML Express Integrated Graphics Controller [8086:27a6] (rev
> > 03)
> > lspci -nn: 00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7
> > Family) High Definition Audio Controller [8086:27d8] (rev 02)
> > lspci -nn: 00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7
> > Family) PCI Express Port 1 [8086:27d0] (rev 02)
> > lspci -nn: 00:1c.1 PCI bridge [0604]: Intel Corporation 82801G (ICH7
> > Family) PCI Express Port 2 [8086:27d2] (rev 02)
> > lspci -nn: 00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7
> > Family) USB UHCI #1 [8086:27c8] (rev 02)
> > lspci -nn: 00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7
> > Family) USB UHCI #2 [8086:27c9] (rev 02)
> > lspci -nn: 00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7
> > Family) USB UHCI #3 [8086:27ca] (rev 02)
> > lspci -nn: 00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7
> > Family) USB UHCI #4 [8086:27cb] (rev 02)
> > lspci -nn: 00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7
> > Family) USB2 EHCI Controller [8086:27cc] (rev 02)
> > lspci -nn: 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI
> > Bridge [8086:2448] (rev e2)
> > lspci -nn: 00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM
> > (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 02)
> > lspci -nn: 00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7
> > Family) IDE Controller [8086:27df] (rev 02)
> > lspci -nn: 00:1f.2 SATA controller [0106]: Intel Corporation
> > 82801GBM/GHM (ICH7 Family) Serial ATA Storage Controller AHCI
> > [8086:27c5] (rev 02)
> > lspci -nn: 00:1f.3 SMBus [0c05]: Intel Corporation 82801G (ICH7 Family)
> > SMBus Controller [8086:27da] (rev 02)
> > lspci -nn: 02:00.0 Network controller [0280]: Intel Corporation
> > PRO/Wireless 3945ABG Network Connection [8086:4222] (rev 02)
> > lspci -nn: 05:05.0 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd Unknown
> > device [1180:0832]
> > lspci -nn: 05:05.1 Generic system peripheral [0805]: Ricoh Co Ltd R5C822
> > SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 19)
> > lspci -nn: 05:05.2 System peripheral [0880]: Ricoh Co Ltd Unknown device
> > [1180:0843] (rev 01)
> > lspci -nn: 05:05.3 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory
> > Stick Bus Host Adapter [1180:0592] (rev 0a)
> > lspci -nn: 05:05.4 System peripheral [0880]: Ricoh Co Ltd xD-Picture
> > Card Controller [1180:0852] (rev 05)
> > lspci -nn: 05:08.0 Ethernet controller [0200]: Intel Corporation PRO/100
> > VE Network Connection [8086:1092] (rev 02)
> > lspci -vnn: 00:00.0 Host bridge [0600]: Intel Corporation Mobile
> > 945GM/PM/GMS/940GML and 945GT Express Memory Controller Hub [8086:27a0]
> > (rev 03)
> > lspci -vnn: Subsystem: Hewlett-Packard Company Unknown device
> > [103c:30bb]
> > lspci -vnn: Flags: bus master, fast devsel, latency 0
> > lspci -vnn: Capabilities: [e0] Vendor Specific Information
> > lspci -vnn:
> > lspci -vnn: 00:02.0 VGA compatible controller [0300]: Intel Corporation
> > Mobile 945GM/GMS/940GML Express Integrated Graphics Controller
> > [8086:27a2] (rev 03)
> > lspci -vnn: Subsystem: Hewlett-Packard Company Unknown device
> > [103c:30bb]
> > lspci -vnn: Flags: bus master, fast devsel, latency 0, IRQ 11
> > lspci -vnn: Memory at d8100000 (32-bit, non-prefetchable) [size=512K]
> > lspci -vnn: I/O ports at 1800 [size=8]
> > lspci -vnn: Memory at c0000000 (32-bit, prefetchable) [size=256M]
> > lspci -vnn: Memory at d8200000 (32-bit, non-prefetchable) [size=256K]
> > lspci -vnn: Capabilities: [90] Message Signalled Interrupts: Mask-
> > 64bit- Queue=0/0 Enable-
> > lspci -vnn: Capabilities: [d0] Power Management version 2
> > lspci -vnn:
> > lspci -vnn: 00:02.1 Display controller [0380]: Intel Corporation Mobile
> > 945GM/GMS/940GML Express Integrated Graphics Controller [8086:27a6] (rev
> > 03)
> > lspci -vnn: Subsystem: Hewlett-Packard Company Unknown device
> > [103c:30bb]
> > lspci -vnn: Flags: bus master, fast devsel, latency 0
> > lspci -vnn: Memory at d8180000 (32-bit, non-prefetchable) [size=512K]
> > lspci -vnn: Capabilities: [d0] Power Management version 2
> > lspci -vnn:
> > lspci -vnn: 00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7
> > Family) High Definition Audio Controller [8086:27d8] (rev 02)
> > lspci -vnn: Subsystem: Hewlett-Packard Company Unknown device
> > [103c:30bb]
> > lspci -vnn: Flags: bus master, fast devsel, latency 0, IRQ 5
> > lspci -vnn: Memory at d8240000 (64-bit, non-prefetchable) [size=16K]
> > lspci -vnn: Capabilities: [50] Power Management version 2
> > lspci -vnn: Capabilities: [60] Message Signalled Interrupts: Mask-
> > 64bit+ Queue=0/0 Enable-
> > lspci -vnn: Capabilities: [70] Express Unknown type IRQ 0
> > lspci -vnn: Capabilities: [100] Virtual Channel
> > lspci -vnn: Capabilities: [130] Unknown (5)
> > lspci -vnn:
> > lspci -vnn: 00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7
> > Family) PCI Express Port 1 [8086:27d0] (rev 02)
> > lspci -vnn: Flags: bus master, fast devsel, latency 0
> > lspci -vnn: Bus: primary=00, secondary=02, subordinate=02,
> > sec-latency=0
> > lspci -vnn: I/O behind bridge: 00002000-00002fff
> > lspci -vnn: Memory behind bridge: d6000000-d7ffffff
> > lspci -vnn: Prefetchable memory behind bridge:
> > 00000000d2000000-00000000d3ffffff
> > lspci -vnn: Capabilities: [40] Express Root Port (Slot+) IRQ 0
> > lspci -vnn: Capabilities: [80] Message Signalled Interrupts: Mask-
> > 64bit- Queue=0/0 Enable+
> > lspci -vnn: Capabilities: [90] Subsystem: Hewlett-Packard Company
> > Unknown device [103c:30bb]
> > lspci -vnn: Capabilities: [a0] Power Management version 2
> > lspci -vnn: Capabilities: [100] Virtual Channel
> > lspci -vnn: Capabilities: [180] Unknown (5)
> > lspci -vnn:
> > lspci -vnn: 00:1c.1 PCI bridge [0604]: Intel Corporation 82801G (ICH7
> > Family) PCI Express Port 2 [8086:27d2] (rev 02)
> > lspci -vnn: Flags: bus master, fast devsel, latency 0
> > lspci -vnn: Bus: primary=00, secondary=03, subordinate=04,
> > sec-latency=0
> > lspci -vnn: I/O behind bridge: 00003000-00003fff
> > lspci -vnn: Memory behind bridge: d4000000-d5ffffff
> > lspci -vnn: Prefetchable memory behind bridge:
> > 00000000d0000000-00000000d1ffffff
> > lspci -vnn: Capabilities: [40] Express Root Port (Slot+) IRQ 0
> > lspci -vnn: Capabilities: [80] Message Signalled Interrupts: Mask-
> > 64bit- Queue=0/0 Enable+
> > lspci -vnn: Capabilities: [90] Subsystem: Hewlett-Packard Company
> > Unknown device [103c:30bb]
> > lspci -vnn: Capabilities: [a0] Power Management version 2
> > lspci -vnn: Capabilities: [100] Virtual Channel
> > lspci -vnn: Capabilities: [180] Unknown (5)
> > lspci -vnn:
> > lspci -vnn: 00:1d.0 USB Controller [0c03]: Intel Corporation 82801G
> > (ICH7 Family) USB UHCI #1 [8086:27c8] (rev 02)
> > lspci -vnn: Subsystem: Hewlett-Packard Company Unknown device
> > [103c:30bb]
> > lspci -vnn: Flags: bus master, medium devsel, latency 0, IRQ 209
> > lspci -vnn: I/O ports at 1820 [size=32]
> > lspci -vnn:
> > lspci -vnn: 00:1d.1 USB Controller [0c03]: Intel Corporation 82801G
> > (ICH7 Family) USB UHCI #2 [8086:27c9] (rev 02)
> > lspci -vnn: Subsystem: Hewlett-Packard Company Unknown device
> > [103c:30bb]
> > lspci -vnn: Flags: bus master, medium devsel, latency 0, IRQ 217
> > lspci -vnn: I/O ports at 1840 [size=32]
> > lspci -vnn:
> > lspci -vnn: 00:1d.2 USB Controller [0c03]: Intel Corporation 82801G
> > (ICH7 Family) USB UHCI #3 [8086:27ca] (rev 02)
> > lspci -vnn: Subsystem: Hewlett-Packard Company Unknown device
> > [103c:30bb]
> > lspci -vnn: Flags: bus master, medium devsel, latency 0, IRQ 225
> > lspci -vnn: I/O ports at 1860 [size=32]
> > lspci -vnn:
> > lspci -vnn: 00:1d.3 USB Controller [0c03]: Intel Corporation 82801G
> > (ICH7 Family) USB UHCI #4 [8086:27cb] (rev 02)
> > lspci -vnn: Subsystem: Hewlett-Packard Company Unknown device
> > [103c:30bb]
> > lspci -vnn: Flags: bus master, medium devsel, latency 0, IRQ 177
> > lspci -vnn: I/O ports at 1880 [size=32]
> > lspci -vnn:
> > lspci -vnn: 00:1d.7 USB Controller [0c03]: Intel Corporation 82801G
> > (ICH7 Family) USB2 EHCI Controller [8086:27cc] (rev 02) (prog-if 20)
> > lspci -vnn: Subsystem: Hewlett-Packard Company Unknown device
> > [103c:30bb]
> > lspci -vnn: Flags: bus master, medium devsel, latency 0, IRQ 209
> > lspci -vnn: Memory at d8444000 (32-bit, non-prefetchable) [size=1K]
> > lspci -vnn: Capabilities: [50] Power Management version 2
> > lspci -vnn: Capabilities: [58] Debug port
> > lspci -vnn:
> > lspci -vnn: 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile
> > PCI Bridge [8086:2448] (rev e2) (prog-if 01)
> > lspci -vnn: Flags: bus master, fast devsel, latency 0
> > lspci -vnn: Bus: primary=00, secondary=05, subordinate=05,
> > sec-latency=32
> > lspci -vnn: I/O behind bridge: 00004000-00004fff
> > lspci -vnn: Memory behind bridge: d8000000-d80fffff
> > lspci -vnn: Capabilities: [50] Subsystem: Hewlett-Packard Company
> > Unknown device [103c:30bb]
> > lspci -vnn:
> > lspci -vnn: 00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM
> > (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 02)
> > lspci -vnn: Subsystem: Hewlett-Packard Company Unknown device
> > [103c:30bb]
> > lspci -vnn: Flags: bus master, medium devsel, latency 0
> > lspci -vnn: Capabilities: [e0] Vendor Specific Information
> > lspci -vnn:
> > lspci -vnn: 00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7
> > Family) IDE Controller [8086:27df] (rev 02) (prog-if 8a [Master SecP
> > PriP])
> > lspci -vnn: Subsystem: Hewlett-Packard Company Unknown device
> > [103c:30bb]
> > lspci -vnn: Flags: bus master, medium devsel, latency 0, IRQ 225
> > lspci -vnn: I/O ports at <unassigned>
> > lspci -vnn: I/O ports at <unassigned>
> > lspci -vnn: I/O ports at <unassigned>
> > lspci -vnn: I/O ports at <unassigned>
> > lspci -vnn: I/O ports at 1810 [size=16]
> > lspci -vnn:
> > lspci -vnn: 00:1f.2 SATA controller [0106]: Intel Corporation
> > 82801GBM/GHM (ICH7 Family) Serial ATA Storage Controller AHCI
> > [8086:27c5] (rev 02) (prog-if 01)
> > lspci -vnn: Subsystem: Hewlett-Packard Company Unknown device
> > [103c:30bb]
> > lspci -vnn: Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 233
> > lspci -vnn: I/O ports at 18d0 [size=8]
> > lspci -vnn: I/O ports at 18c4 [size=4]
> > lspci -vnn: I/O ports at 18c8 [size=8]
> > lspci -vnn: I/O ports at 18c0 [size=4]
> > lspci -vnn: I/O ports at 18b0 [size=16]
> > lspci -vnn: Memory at d8444400 (32-bit, non-prefetchable) [size=1K]
> > lspci -vnn: Capabilities: [80] Message Signalled Interrupts: Mask-
> > 64bit- Queue=0/0 Enable+
> > lspci -vnn: Capabilities: [70] Power Management version 2
> > lspci -vnn:
> > lspci -vnn: 00:1f.3 SMBus [0c05]: Intel Corporation 82801G (ICH7 Family)
> > SMBus Controller [8086:27da] (rev 02)
> > lspci -vnn: Subsystem: Hewlett-Packard Company Unknown device
> > [103c:30bb]
> > lspci -vnn: Flags: medium devsel, IRQ 4
> > lspci -vnn: I/O ports at 18e0 [size=32]
> > lspci -vnn:
> > lspci -vnn: 02:00.0 Network controller [0280]: Intel Corporation
> > PRO/Wireless 3945ABG Network Connection [8086:4222] (rev 02)
> > lspci -vnn: Subsystem: Hewlett-Packard Company Unknown device
> > [103c:135c]
> > lspci -vnn: Flags: bus master, fast devsel, latency 0, IRQ 11
> > lspci -vnn: Memory at d6000000 (32-bit, non-prefetchable) [size=4K]
> > lspci -vnn: Capabilities: [c8] Power Management version 2
> > lspci -vnn: Capabilities: [d0] Message Signalled Interrupts: Mask-
> > 64bit+ Queue=0/0 Enable-
> > lspci -vnn: Capabilities: [e0] Express Legacy Endpoint IRQ 0
> > lspci -vnn: Capabilities: [100] Advanced Error Reporting
> > lspci -vnn: Capabilities: [140] Device Serial Number
> > 5c-d4-18-ff-ff-d2-19-00
> > lspci -vnn:
> > lspci -vnn: 05:05.0 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd Unknown
> > device [1180:0832] (prog-if 10)
> > lspci -vnn: Subsystem: Hewlett-Packard Company Unknown device
> > [103c:30bb]
> > lspci -vnn: Flags: bus master, medium devsel, latency 64, IRQ 177
> > lspci -vnn: Memory at d8001000 (32-bit, non-prefetchable) [size=2K]
> > lspci -vnn: Capabilities: [dc] Power Management version 2
> > lspci -vnn:
> > lspci -vnn: 05:05.1 Generic system peripheral [0805]: Ricoh Co Ltd
> > R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 19)
> > lspci -vnn: Subsystem: Hewlett-Packard Company Unknown device
> > [103c:30bb]
> > lspci -vnn: Flags: medium devsel, IRQ 3
> > lspci -vnn: Memory at d8001800 (32-bit, non-prefetchable) [disabled]
> > [size=256]
> > lspci -vnn: Capabilities: [80] Power Management version 2
> > lspci -vnn:
> > lspci -vnn: 05:05.2 System peripheral [0880]: Ricoh Co Ltd Unknown
> > device [1180:0843] (rev 01)
> > lspci -vnn: Subsystem: Hewlett-Packard Company Unknown device
> > [103c:30bb]
> > lspci -vnn: Flags: medium devsel, IRQ 3
> > lspci -vnn: Memory at d8001c00 (32-bit, non-prefetchable) [disabled]
> > [size=256]
> > lspci -vnn: Capabilities: [80] Power Management version 2
> > lspci -vnn:
> > lspci -vnn: 05:05.3 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory
> > Stick Bus Host Adapter [1180:0592] (rev 0a)
> > lspci -vnn: Subsystem: Hewlett-Packard Company Unknown device
> > [103c:30bb]
> > lspci -vnn: Flags: medium devsel, IRQ 3
> > lspci -vnn: Memory at d8002000 (32-bit, non-prefetchable) [disabled]
> > [size=256]
> > lspci -vnn: Capabilities: [80] Power Management version 2
> > lspci -vnn:
> > lspci -vnn: 05:05.4 System peripheral [0880]: Ricoh Co Ltd xD-Picture
> > Card Controller [1180:0852] (rev 05)
> > lspci -vnn: Subsystem: Hewlett-Packard Company Unknown device
> > [103c:30bb]
> > lspci -vnn: Flags: medium devsel, IRQ 3
> > lspci -vnn: Memory at d8002400 (32-bit, non-prefetchable) [disabled]
> > [size=256]
> > lspci -vnn: Capabilities: [80] Power Management version 2
> > lspci -vnn:
> > lspci -vnn: 05:08.0 Ethernet controller [0200]: Intel Corporation
> > PRO/100 VE Network Connection [8086:1092] (rev 02)
> > lspci -vnn: Subsystem: Hewlett-Packard Company Unknown device
> > [103c:30bb]
> > lspci -vnn: Flags: bus master, medium devsel, latency 64, IRQ 50
> > lspci -vnn: Memory at d8000000 (32-bit, non-prefetchable) [size=4K]
> > lspci -vnn: I/O ports at 4000 [size=64]
> > lspci -vnn: Capabilities: [dc] Power Management version 2
> > lspci -vnn:
> > modulemap: 8086:27c8 uhci_hcd
> > modulemap: 8086:27c9 uhci_hcd
> > modulemap: 8086:27ca uhci_hcd
> > modulemap: 8086:27cb uhci_hcd
> > modulemap: 8086:27cc ehci_hcd
> > modulemap: 8086:27df piix
> > modulemap: 8086:27c5 ahci
> > modulemap: 1180:0832 ohci1394
> > modulemap: 8086:1092 e100
> > lsmod: Module Size Used by
> > lsmod: nls_cp437 5760 0
> > lsmod: qnx4 10612 0
> > lsmod: ntfs 184084 0
> > lsmod: xfs 464756 0
> > lsmod: reiserfs 210432 0
> > lsmod: jfs 156380 0
> > lsmod: ext3 116104 2
> > lsmod: jbd 47272 1 ext3
> > lsmod: vfat 11392 0
> > lsmod: fat 45596 1 vfat
> > lsmod: e100 32008 0
> > lsmod: mii 5376 1 e100
> > lsmod: eth1394 17540 0
> > lsmod: nls_iso8859_1 4096 0
> > lsmod: rsrc_nonstatic 11648 0
> > lsmod: pcmcia_core 35856 1 rsrc_nonstatic
> > lsmod: sbp2 20232 0
> > lsmod: isofs 31544 0
> > lsmod: ide_disk 14720 0
> > lsmod: ide_generic 1280 0 [permanent]
> > lsmod: pdc202xx_new 7808 0 [permanent]
> > lsmod: aec62xx 6656 0 [permanent]
> > lsmod: alim15x3 11020 0 [permanent]
> > lsmod: amd74xx 12956 0 [permanent]
> > lsmod: atiixp 5392 0 [permanent]
> > lsmod: cmd64x 9884 0 [permanent]
> > lsmod: cs5520 4608 0 [permanent]
> > lsmod: cs5530 4864 0 [permanent]
> > lsmod: cs5535 4224 0 [permanent]
> > lsmod: cy82c693 4356 0 [permanent]
> > lsmod: hpt34x 4992 0 [permanent]
> > lsmod: it821x 7684 0 [permanent]
> > lsmod: ns87415 4168 0 [permanent]
> > lsmod: opti621 3972 0 [permanent]
> > lsmod: pdc202xx_old 9344 0 [permanent]
> > lsmod: rz1000 2688 0 [permanent]
> > lsmod: sc1200 6528 0 [permanent]
> > lsmod: serverworks 8328 0 [permanent]
> > lsmod: siimage 10880 0 [permanent]
> > lsmod: sis5513 12296 0 [permanent]
> > lsmod: slc90e66 4992 0 [permanent]
> > lsmod: triflex 3712 0 [permanent]
> > lsmod: trm290 3972 0 [permanent]
> > lsmod: via82cxxx 8324 0 [permanent]
> > lsmod: usb_storage 70848 0
> > lsmod: usbmouse 5376 0
> > lsmod: vga16fb 11148 0
> > lsmod: vgastate 7680 1 vga16fb
> > lsmod: usbserial 28136 0
> > lsmod: usbhid 35552 0
> > lsmod: usbkbd 6656 0
> > lsmod: thermal 13320 0
> > lsmod: processor 23212 1 thermal
> > lsmod: fan 4740 0
> > lsmod: sd_mod 18832 4
> > lsmod: ide_cd 35360 0
> > lsmod: cdrom 32160 1 ide_cd
> > lsmod: generic 4996 0 [permanent]
> > lsmod: psmouse 34312 0
> > lsmod: ahci 17540 3
> > lsmod: ohci1394 29744 0
> > lsmod: ieee1394 84408 3 eth1394,sbp2,ohci1394
> > lsmod: libata 87188 1 ahci
> > lsmod: scsi_mod 121352 5
> > sbp2,usb_storage,sd_mod,ahci,libata
> > lsmod: piix 9092 0 [permanent]
> > lsmod: ide_core 107248 30
> > ide_disk,ide_generic,pdc202xx_new,aec62xx,alim15x3,amd74xx,atiixp,cmd64x,cs5520,cs5530,cs5535,cy82c693,hpt34x,it821x,ns87415,opti621,pdc202xx_old,rz1000,sc1200,serverworks,siimage,sis5513,slc90e66,triflex,trm290,via82cxxx,usb_storage,ide_cd,generic,piix
> > lsmod: ehci_hcd 26888 0
> > lsmod: uhci_hcd 19848 0
> > lsmod: usbcore 108676 8
> > usb_storage,usbmouse,usbserial,usbhid,usbkbd,ehci_hcd,uhci_hcd
> > lsmod: evdev 8832 4
> > df: Filesystem 1k-blocks Used Available Use% Mounted on
> > df: tmpfs 453396 432 452964 0% /dev
> > df: tmpfs 453396 432 452964 0% /dev
> > df: tmpfs 453396 432 452964 0% /.dev
> > df: /dev/scsi/host0/bus0/target0/lun0/part5 6728280 2546072
> > 3840428 40% /target
> > df: /dev/scsi/host0/bus0/target0/lun0/part7 39785248 180256
> > 37584020 0% /target/home
> > free: total used free shared
> > buffers
> > free: Mem: 906792 883688 23104 0
> > 67928
> > free: Swap: 1799240 428 1798812
> > free: Total: 2706032 884116 1821916
> > cardctl status: /usr/bin/report-hw: /usr/bin/report-hw: 50: cardctl: not
> > found
> > cardctl ident: /usr/bin/report-hw: /usr/bin/report-hw: 51: cardctl: not
> > found
> > /proc/cpuinfo: processor : 0
> > /proc/cpuinfo: vendor_id : GenuineIntel
> > /proc/cpuinfo: cpu family : 6
> > /proc/cpuinfo: model : 14
> > /proc/cpuinfo: model name : Genuine Intel(R) CPU T2250 @
> > 1.73GHz
> > /proc/cpuinfo: stepping : 8
> > /proc/cpuinfo: cpu MHz : 1729.604
> > /proc/cpuinfo: cache size : 2048 KB
> > /proc/cpuinfo: fdiv_bug : no
> > /proc/cpuinfo: hlt_bug : no
> > /proc/cpuinfo: f00f_bug : no
> > /proc/cpuinfo: coma_bug : no
> > /proc/cpuinfo: fpu : yes
> > /proc/cpuinfo: fpu_exception : yes
> > /proc/cpuinfo: cpuid level : 10
> > /proc/cpuinfo: wp : yes
> > /proc/cpuinfo: flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr
> > pge mca cmov pat clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx
> > constant_tsc pni monitor est tm2 xtpr
> > /proc/cpuinfo: bogomips : 3462.80
> > /proc/cpuinfo:
> > /proc/ioports: 0000-001f : dma1
> > /proc/ioports: 0020-0021 : pic1
> > /proc/ioports: 0040-0043 : timer0
> > /proc/ioports: 0050-0053 : timer1
> > /proc/ioports: 0060-006f : keyboard
> > /proc/ioports: 0080-008f : dma page reg
> > /proc/ioports: 00a0-00a1 : pic2
> > /proc/ioports: 00c0-00df : dma2
> > /proc/ioports: 00f0-00ff : fpu
> > /proc/ioports: 01f0-01f7 : ide0
> > /proc/ioports: 03c0-03df : vesafb
> > /proc/ioports: 03f6-03f6 : ide0
> > /proc/ioports: 06a0-06af : pnp 00:06
> > /proc/ioports: 06b0-06ff : pnp 00:06
> > /proc/ioports: 1000-107f : motherboard
> > /proc/ioports: 1000-1003 : ACPI PM1a_EVT_BLK
> > /proc/ioports: 1004-1005 : ACPI PM1a_CNT_BLK
> > /proc/ioports: 1008-100b : ACPI PM_TMR
> > /proc/ioports: 1010-1015 : ACPI CPU throttle
> > /proc/ioports: 1020-1020 : ACPI PM2_CNT_BLK
> > /proc/ioports: 1028-102f : ACPI GPE0_BLK
> > /proc/ioports: 1180-11bf : motherboard
> > /proc/ioports: 1640-164f : motherboard
> > /proc/ioports: 1800-1807 : 0000:00:02.0
> > /proc/ioports: 1810-181f : 0000:00:1f.1
> > /proc/ioports: 1810-1817 : ide0
> > /proc/ioports: 1820-183f : 0000:00:1d.0
> > /proc/ioports: 1820-183f : uhci_hcd
> > /proc/ioports: 1840-185f : 0000:00:1d.1
> > /proc/ioports: 1840-185f : uhci_hcd
> > /proc/ioports: 1860-187f : 0000:00:1d.2
> > /proc/ioports: 1860-187f : uhci_hcd
> > /proc/ioports: 1880-189f : 0000:00:1d.3
> > /proc/ioports: 1880-189f : uhci_hcd
> > /proc/ioports: 18b0-18bf : 0000:00:1f.2
> > /proc/ioports: 18b0-18bf : ahci
> > /proc/ioports: 18c0-18c3 : 0000:00:1f.2
> > /proc/ioports: 18c0-18c3 : ahci
> > /proc/ioports: 18c4-18c7 : 0000:00:1f.2
> > /proc/ioports: 18c4-18c7 : ahci
> > /proc/ioports: 18c8-18cf : 0000:00:1f.2
> > /proc/ioports: 18c8-18cf : ahci
> > /proc/ioports: 18d0-18d7 : 0000:00:1f.2
> > /proc/ioports: 18d0-18d7 : ahci
> > /proc/ioports: 18e0-18ff : 0000:00:1f.3
> > /proc/ioports: 2000-2fff : PCI Bus #02
> > /proc/ioports: 3000-3fff : PCI Bus #03
> > /proc/ioports: 4000-4fff : PCI Bus #05
> > /proc/ioports: 4000-403f : 0000:05:08.0
> > /proc/ioports: 4000-403f : e100
> > /proc/iomem: 00000000-0009f7ff : System RAM
> > /proc/iomem: 00000000-00000000 : Crash kernel
> > /proc/iomem: 0009f800-0009ffff : reserved
> > /proc/iomem: 000a0000-000bffff : Video RAM area
> > /proc/iomem: 000c0000-000c7fff : Video ROM
> > /proc/iomem: 000ce800-000cffff : Adapter ROM
> > /proc/iomem: 000f0000-000fffff : System ROM
> > /proc/iomem: 00100000-3f66ffff : System RAM
> > /proc/iomem: 00100000-002773b9 : Kernel code
> > /proc/iomem: 002773ba-0030dc73 : Kernel data
> > /proc/iomem: 3f670000-3f6fffff : ACPI Non-volatile Storage
> > /proc/iomem: 3f700000-3fffffff : reserved
> > /proc/iomem: c0000000-cfffffff : 0000:00:02.0
> > /proc/iomem: c0000000-c07affff : vesafb
> > /proc/iomem: d0000000-d1ffffff : PCI Bus #03
> > /proc/iomem: d2000000-d3ffffff : PCI Bus #02
> > /proc/iomem: d4000000-d5ffffff : PCI Bus #03
> > /proc/iomem: d6000000-d7ffffff : PCI Bus #02
> > /proc/iomem: d6000000-d6000fff : 0000:02:00.0
> > /proc/iomem: d8000000-d80fffff : PCI Bus #05
> > /proc/iomem: d8000000-d8000fff : 0000:05:08.0
> > /proc/iomem: d8000000-d8000fff : e100
> > /proc/iomem: d8001000-d80017ff : 0000:05:05.0
> > /proc/iomem: d8001000-d80017ff : ohci1394
> > /proc/iomem: d8001800-d80018ff : 0000:05:05.1
> > /proc/iomem: d8001c00-d8001cff : 0000:05:05.2
> > /proc/iomem: d8002000-d80020ff : 0000:05:05.3
> > /proc/iomem: d8002400-d80024ff : 0000:05:05.4
> > /proc/iomem: d8100000-d817ffff : 0000:00:02.0
> > /proc/iomem: d8180000-d81fffff : 0000:00:02.1
> > /proc/iomem: d8200000-d823ffff : 0000:00:02.0
> > /proc/iomem: d8240000-d8243fff : 0000:00:1b.0
> > /proc/iomem: d8444000-d84443ff : 0000:00:1d.7
> > /proc/iomem: d8444000-d84443ff : ehci_hcd
> > /proc/iomem: d8444400-d84447ff : 0000:00:1f.2
> > /proc/iomem: d8444400-d84447ff : ahci
> > /proc/iomem: e0000000-efffffff : reserved
> > /proc/iomem: fec00000-fec0ffff : reserved
> > /proc/iomem: fed00000-fed003ff : reserved
> > /proc/iomem: fed14000-fed19fff : reserved
> > /proc/iomem: fed1c000-fed8ffff : reserved
> > /proc/iomem: fee00000-fee00fff : reserved
> > /proc/iomem: ff000000-ffffffff : reserved
> > /proc/interrupts: CPU0
> > /proc/interrupts: 0: 700848 IO-APIC-edge timer
> > /proc/interrupts: 1: 290 IO-APIC-edge i8042
> > /proc/interrupts: 9: 4708 IO-APIC-level acpi
> > /proc/interrupts: 12: 1990 IO-APIC-edge i8042
> > /proc/interrupts: 14: 2510 IO-APIC-edge ide0
> > /proc/interrupts: 50: 603005 IO-APIC-level eth1
> > /proc/interrupts: 177: 2 IO-APIC-level uhci_hcd:usb4,
> > ohci1394
> > /proc/interrupts: 209: 0 IO-APIC-level uhci_hcd:usb1,
> > ehci_hcd:usb5
> > /proc/interrupts: 217: 0 IO-APIC-level uhci_hcd:usb2
> > /proc/interrupts: 225: 0 IO-APIC-level uhci_hcd:usb3
> > /proc/interrupts: 233: 118078 PCI-MSI libata
> > /proc/interrupts: NMI: 0
> > /proc/interrupts: LOC: 373460
> > /proc/interrupts: ERR: 0
> > /proc/interrupts: MIS: 0
> > /proc/meminfo: MemTotal: 906792 kB
> > /proc/meminfo: MemFree: 22896 kB
> > /proc/meminfo: Buffers: 67928 kB
> > /proc/meminfo: Cached: 733604 kB
> > /proc/meminfo: SwapCached: 0 kB
> > /proc/meminfo: Active: 279764 kB
> > /proc/meminfo: Inactive: 547020 kB
> > /proc/meminfo: HighTotal: 0 kB
> > /proc/meminfo: HighFree: 0 kB
> > /proc/meminfo: LowTotal: 906792 kB
> > /proc/meminfo: LowFree: 22896 kB
> > /proc/meminfo: SwapTotal: 1799240 kB
> > /proc/meminfo: SwapFree: 1798812 kB
> > /proc/meminfo: Dirty: 1300 kB
> > /proc/meminfo: Writeback: 0 kB
> > /proc/meminfo: AnonPages: 25292 kB
> > /proc/meminfo: Mapped: 7072 kB
> > /proc/meminfo: Slab: 46500 kB
> > /proc/meminfo: PageTables: 260 kB
> > /proc/meminfo: NFS_Unstable: 0 kB
> > /proc/meminfo: Bounce: 0 kB
> > /proc/meminfo: CommitLimit: 2252636 kB
> > /proc/meminfo: Committed_AS: 66720 kB
> > /proc/meminfo: VmallocTotal: 122576 kB
> > /proc/meminfo: VmallocUsed: 10468 kB
> > /proc/meminfo: VmallocChunk: 111152 kB
> > /proc/bus/input/devices: I: Bus=0011 Vendor=0001 Product=0001
> > Version=ab41
> > /proc/bus/input/devices: N: Name="AT Translated Set 2 keyboard"
> > /proc/bus/input/devices: P: Phys=isa0060/serio0/input0
> > /proc/bus/input/devices: S: Sysfs=/class/input/input0
> > /proc/bus/input/devices: H: Handlers=kbd event0
> > /proc/bus/input/devices: B: EV=120013
> > /proc/bus/input/devices: B: KEY=4 2000000 3802078 f840d001 feffffdf
> > ffefffff ffffffff fffffffe
> > /proc/bus/input/devices: B: MSC=10
> > /proc/bus/input/devices: B: LED=7
> > /proc/bus/input/devices:
> > /proc/bus/input/devices: I: Bus=0011 Vendor=0002 Product=0007
> > Version=0000
> > /proc/bus/input/devices: N: Name="SynPS/2 Synaptics TouchPad"
> > /proc/bus/input/devices: P: Phys=isa0060/serio1/input0
> > /proc/bus/input/devices: S: Sysfs=/class/input/input1
> > /proc/bus/input/devices: H: Handlers=mouse0 event1
> > /proc/bus/input/devices: B: EV=b
> > /proc/bus/input/devices: B: KEY=6420 0 70000 0 0 0 0 0 0 0 0
> > /proc/bus/input/devices: B: ABS=11000003
> > /proc/bus/input/devices:
> > dmidecode: # dmidecode 2.8
> > dmidecode: SMBIOS 2.4 present.
> > dmidecode: 22 structures occupying 741 bytes.
> > dmidecode: Table at 0x000DF010.
> > dmidecode:
> > dmidecode: Handle 0x0000, DMI type 0, 24 bytes
> > dmidecode: BIOS Information
> > dmidecode: Vendor: Hewlett-Packard
> > dmidecode: Version: F.09
> > dmidecode: Release Date: 11/13/2006
> > dmidecode: Address: 0xE7190
> > dmidecode: Runtime Size: 102000 bytes
> > dmidecode: ROM Size: 1024 kB
> > dmidecode: Characteristics:
> > dmidecode: ISA is supported
> > dmidecode: PCI is supported
> > dmidecode: PNP is supported
> > dmidecode: BIOS is upgradeable
> > dmidecode: BIOS shadowing is allowed
> > dmidecode: ESCD support is available
> > dmidecode: Boot from CD is supported
> > dmidecode: Selectable boot is supported
> > dmidecode: Print screen service is supported (int 5h)
> > dmidecode: 8042 keyboard services are supported (int 9h)
> > dmidecode: Serial services are supported (int 14h)
> > dmidecode: Printer services are supported (int 17h)
> > dmidecode: ACPI is supported
> > dmidecode: USB legacy is supported
> > dmidecode: AGP is supported
> > dmidecode: Smart battery is supported
> > dmidecode: BIOS boot specification is supported
> > dmidecode:
> > dmidecode: Handle 0x0001, DMI type 1, 27 bytes
> > dmidecode: System Information
> > dmidecode: Manufacturer: Hewlett-Packard
> > dmidecode: Product Name: HP Pavilion dv6000 (RT118EA#AB9)
> > dmidecode: Version: Rev 1
> > dmidecode: Serial Number: CNF65026LK
> > dmidecode: UUID: 434E4636-3530-3236-4C4B-001636BF3737
> > dmidecode: Wake-up Type: Power Switch
> > dmidecode: SKU Number: RT118EA#AB9
> > dmidecode: Family: 103C_5335KV
> > dmidecode:
> > dmidecode: Handle 0x0002, DMI type 2, 8 bytes
> > dmidecode: Base Board Information
> > dmidecode: Manufacturer: Quanta
> > dmidecode: Product Name: 30BB
> > dmidecode: Version: 66.21
> > dmidecode: Serial Number: None
> > dmidecode:
> > dmidecode: Handle 0x0003, DMI type 3, 17 bytes
> > dmidecode: Chassis Information
> > dmidecode: Manufacturer: Quanta
> > dmidecode: Type: Notebook
> > dmidecode: Lock: Not Present
> > dmidecode: Version: N/A
> > dmidecode: Serial Number: None
> > dmidecode: Asset Tag:
> > dmidecode: Boot-up State: Safe
> > dmidecode: Power Supply State: Safe
> > dmidecode: Thermal State: Safe
> > dmidecode: Security Status: None
> > dmidecode: OEM Information: 0x00001234
> > dmidecode:
> > dmidecode: Handle 0x0004, DMI type 4, 35 bytes
> > dmidecode: Processor Information
> > dmidecode: Socket Designation: U2E1
> > dmidecode: Type: Central Processor
> > dmidecode: Family: Other
> > dmidecode: Manufacturer: Intel
> > dmidecode: ID: E8 06 00 00 FF FB E9 BF
> > dmidecode: Version: Genuine Intel(R) CPU T2250
> > dmidecode: Voltage: 1.8 V
> > dmidecode: External Clock: 533 MHz
> > dmidecode: Max Speed: 1730 MHz
> > dmidecode: Current Speed: 1730 MHz
> > dmidecode: Status: Populated, Enabled
> > dmidecode: Upgrade: Socket 478
> > dmidecode: L1 Cache Handle: 0x0005
> > dmidecode: L2 Cache Handle: 0x0006
> > dmidecode: L3 Cache Handle: Not Provided
> > dmidecode: Serial Number: Not Specified
> > dmidecode: Asset Tag: Not Specified
> > dmidecode: Part Number: Not Specified
> > dmidecode:
> > dmidecode: Handle 0x0005, DMI type 7, 19 bytes
> > dmidecode: Cache Information
> > dmidecode: Socket Designation: L1 Cache
> > dmidecode: Configuration: Enabled, Socketed, Level 1
> > dmidecode: Operational Mode: Write Back
> > dmidecode: Location: Internal
> > dmidecode: Installed Size: 32 KB
> > dmidecode: Maximum Size: 32 KB
> > dmidecode: Supported SRAM Types:
> > dmidecode: Burst
> > dmidecode: Pipeline Burst
> > dmidecode: Asynchronous
> > dmidecode: Installed SRAM Type: Asynchronous
> > dmidecode: Speed: Unknown
> > dmidecode: Error Correction Type: Unknown
> > dmidecode: System Type: Unknown
> > dmidecode: Associativity: Unknown
> > dmidecode:
> > dmidecode: Handle 0x0006, DMI type 7, 19 bytes
> > dmidecode: Cache Information
> > dmidecode: Socket Designation: L2 Cache
> > dmidecode: Configuration: Enabled, Socketed, Level 2
> > dmidecode: Operational Mode: Write Back
> > dmidecode: Location: External
> > dmidecode: Installed Size: 2048 KB
> > dmidecode: Maximum Size: 2048 KB
> > dmidecode: Supported SRAM Types:
> > dmidecode: Burst
> > dmidecode: Pipeline Burst
> > dmidecode: Asynchronous
> > dmidecode: Installed SRAM Type: Burst
> > dmidecode: Speed: Unknown
> > dmidecode: Error Correction Type: Unknown
> > dmidecode: System Type: Unknown
> > dmidecode: Associativity: Unknown
> > dmidecode:
> > dmidecode: Handle 0x0007, DMI type 9, 13 bytes
> > dmidecode: System Slot Information
> > dmidecode: Designation: PCI Express Slot 1
> > dmidecode: Type: 64-bit PCI Express
> > dmidecode: Current Usage: Available
> > dmidecode: Length: Short
> > dmidecode: Characteristics:
> > dmidecode: 5.0 V is provided
> > dmidecode: 3.3 V is provided
> > dmidecode:
> > dmidecode: Handle 0x0008, DMI type 9, 13 bytes
> > dmidecode: System Slot Information
> > dmidecode: Designation: PCI Express Slot 2
> > dmidecode: Type: 64-bit PCI Express
> > dmidecode: Current Usage: Available
> > dmidecode: Length: Short
> > dmidecode: Characteristics:
> > dmidecode: 5.0 V is provided
> > dmidecode: 3.3 V is provided
> > dmidecode: PME signal is supported
> > dmidecode: Hot-plug devices are supported
> > dmidecode:
> > dmidecode: Handle 0x0009, DMI type 9, 13 bytes
> > dmidecode: System Slot Information
> > dmidecode: Designation: PCI Express Slot 3
> > dmidecode: Type: 64-bit PCI Express
> > dmidecode: Current Usage: Available
> > dmidecode: Length: Short
> > dmidecode: Characteristics:
> > dmidecode: 5.0 V is provided
> > dmidecode: 3.3 V is provided
> > dmidecode: PME signal is supported
> > dmidecode:
> > dmidecode: Handle 0x000A, DMI type 10, 6 bytes
> > dmidecode: On Board Device Information
> > dmidecode: Type: Video
> > dmidecode: Status: Enabled
> > dmidecode: Description: 8
> > dmidecode:
> > dmidecode: Handle 0x000B, DMI type 11, 5 bytes
> > dmidecode: OEM Strings
> > dmidecode: String 1: $HP$
> > dmidecode:
> > dmidecode: Handle 0x000C, DMI type 14, 8 bytes
> > dmidecode: Group Associations
> > dmidecode: Name: Cpu Module
> > dmidecode: Items: 1
> > dmidecode: 0x0015 (Processor)
> > dmidecode:
> > dmidecode: Handle 0x000D, DMI type 16, 15 bytes
> > dmidecode: Physical Memory Array
> > dmidecode: Location: System Board Or Motherboard
> > dmidecode: Use: System Memory
> > dmidecode: Error Correction Type: None
> > dmidecode: Maximum Capacity: 2 GB
> > dmidecode: Error Information Handle: Not Provided
> > dmidecode: Number Of Devices: 2
> > dmidecode:
> > dmidecode: Handle 0x000E, DMI type 17, 27 bytes
> > dmidecode: Memory Device
> > dmidecode: Array Handle: 0x000D
> > dmidecode: Error Information Handle: No Error
> > dmidecode: Total Width: 64 bits
> > dmidecode: Data Width: 64 bits
> > dmidecode: Size: 512 MB
> > dmidecode: Form Factor: DIMM
> > dmidecode: Set: 1
> > dmidecode: Locator: DIMM 1
> > dmidecode: Bank Locator: Bank 0,1
> > dmidecode: Type: DDR2
> > dmidecode: Type Detail: Synchronous
> > dmidecode: Speed: 533 MHz (1.9 ns)
> > dmidecode: Manufacturer: Not Specified
> > dmidecode: Serial Number: Not Specified
> > dmidecode: Asset Tag: Not Specified
> > dmidecode: Part Number: Not Specified
> > dmidecode:
> > dmidecode: Handle 0x000F, DMI type 17, 27 bytes
> > dmidecode: Memory Device
> > dmidecode: Array Handle: 0x000D
> > dmidecode: Error Information Handle: No Error
> > dmidecode: Total Width: 64 bits
> > dmidecode: Data Width: 64 bits
> > dmidecode: Size: 512 MB
> > dmidecode: Form Factor: DIMM
> > dmidecode: Set: 1
> > dmidecode: Locator: DIMM 2
> > dmidecode: Bank Locator: Bank 2,3
> > dmidecode: Type: DDR2
> > dmidecode: Type Detail: Synchronous
> > dmidecode: Speed: 533 MHz (1.9 ns)
> > dmidecode: Manufacturer: Not Specified
> > dmidecode: Serial Number: Not Specified
> > dmidecode: Asset Tag: Not Specified
> > dmidecode: Part Number: Not Specified
> > dmidecode:
> > dmidecode: Handle 0x0010, DMI type 19, 15 bytes
> > dmidecode: Memory Array Mapped Address
> > dmidecode: Starting Address: 0x00000000000
> > dmidecode: Ending Address: 0x0003FFFFFFF
> > dmidecode: Range Size: 1 GB
> > dmidecode: Physical Array Handle: 0x000D
> > dmidecode: Partition Width: 0
> > dmidecode:
> > dmidecode: Handle 0x0011, DMI type 20, 19 bytes
> > dmidecode: Memory Device Mapped Address
> > dmidecode: Starting Address: 0x00000000000
> > dmidecode: Ending Address: 0x0001FFFFFFF
> > dmidecode: Range Size: 512 MB
> > dmidecode: Physical Device Handle: 0x000E
> > dmidecode: Memory Array Mapped Address Handle: 0x0010
> > dmidecode: Partition Row Position: 2
> > dmidecode: Interleave Position: 2
> > dmidecode: Interleaved Data Depth: 2
> > dmidecode:
> > dmidecode: Handle 0x0012, DMI type 20, 19 bytes
> > dmidecode: Memory Device Mapped Address
> > dmidecode: Starting Address: 0x00020000000
> > dmidecode: Ending Address: 0x0003FFFFFFF
> > dmidecode: Range Size: 512 MB
> > dmidecode: Physical Device Handle: 0x000F
> > dmidecode: Memory Array Mapped Address Handle: 0x0010
> > dmidecode: Partition Row Position: 2
> > dmidecode: Interleave Position: 2
> > dmidecode: Interleaved Data Depth: 2
> > dmidecode:
> > dmidecode: Handle 0x0013, DMI type 32, 20 bytes
> > dmidecode: System Boot Information
> > dmidecode: Status: <OUT OF SPEC>
> > dmidecode:
> > dmidecode: Handle 0x0014, DMI type 127, 4 bytes
> > dmidecode: End Of Table
> > dmidecode:
> > dmidecode: Handle 0x0015, DMI type 127, 4 bytes
> > dmidecode: End Of Table
> > dmidecode:
> > /proc/fb: 0 VESA VGA
> > /proc/fb: 1 VGA16 VGA
> > /etc/directfbrc: no-hardware
> > /etc/directfbrc: bg-color=ffdcdad5
> > /etc/directfbrc: screenshot-dir=/var/log
> > /etc/directfbrc: disable-module=keyboard
> > /etc/directfbrc: disable-module=ps2mouse
> > /etc/directfbrc: #disable-module=linux_input
> > dfbinfo: (*) DirectFB/Config: Parsing config file '/etc/directfbrc'.
> > dfbinfo:
> > dfbinfo: ---------------------- DirectFB v0.9.25
> > ---------------------
> > dfbinfo: (c) 2000-2002 convergence integrated media GmbH
> > dfbinfo: (c) 2002-2004 convergence GmbH
> > dfbinfo:
> > -----------------------------------------------------------
> > dfbinfo:
> > dfbinfo: (*) DirectFB/Core: Single Application Core. (2006-12-04 07:06)
> > dfbinfo: (*) Direct/Memcpy: Using linux kernel memcpy()
> > dfbinfo: (*) Direct/Thread: Running 'VT Switcher' (CRITICAL, 24934)...
> > dfbinfo: (*) Direct/Modules: suppress module 'keyboard'
> > dfbinfo: (*) Direct/Modules: suppress module 'ps2mouse'
> > dfbinfo: (*) Direct/Thread: Running 'Linux Input' (INPUT, 24935)...
> > dfbinfo: (!!!) *** UNIMPLEMENTED [fusion_reactor_set_lock] ***
> > [../../../lib/fusion/reactor.c:853]
> > dfbinfo: (*) DirectFB/Input: AT Translated Set 2 keyboard (1) 0.1
> > (convergence integrated media GmbH)
> > dfbinfo: (*) Direct/Thread: Running 'Linux Input' (INPUT, 24936)...
> > dfbinfo: (*) DirectFB/Input: SynPS/2 Synaptics TouchPad (2) 0.1
> > (convergence integrated media GmbH)
> > dfbinfo: (*) DirectFB/Graphics: Generic Software Rasterizer 0.6
> > (convergence integrated media GmbH)
> > dfbinfo: (*) DirectFB/Core/WM: Default 0.2 (Convergence GmbH)
> > dfbinfo:
> > dfbinfo:
> > dfbinfo: Screen (00) FBDev Primary Screen (primary screen)
> > dfbinfo: Caps: VSYNC POWER_MANAGEMENT
> > dfbinfo:
> > dfbinfo: Layer (00) FBDev Primary Layer (primary layer)
> > dfbinfo: Type: GRAPHICS
> > dfbinfo: Caps: SURFACE BRIGHTNESS CONTRAST SATURATION
> > dfbinfo:
> > dfbinfo:
> > dfbinfo: Input (00) AT Translated Set 2 keyboard (primary keyboard)
> > dfbinfo: Type: KEYBOARD
> > dfbinfo: Caps: KEYS
> > dfbinfo:
> > dfbinfo: Input (01) SynPS/2 Synaptics TouchPad (primary mouse)
> > dfbinfo: Type: MOUSE
> > dfbinfo: Caps: AXES BUTTONS
> > dfbinfo: Max. Axis: 1
> > dfbinfo: Max. Button: 2
> > dfbinfo:
> >
> > ==============================================
> > Installer status:
> > ==============================================
> > Package: ttf-thai-tlwg-udeb
> > Status: install ok unpacked
> > Version: 1:0.4.5-3
> > Description: Thai fonts in TrueType format for D-I use
> >
> > Package: pcmcia-storage-modules-2.6.18-3-486-di
> > Status: install ok unpacked
> > Version: 1.40
> > Provides: pcmcia-storage-modules
> > Depends: kernel-image-2.6.18-3-486-di, ide-core-modules-2.6.18-3-486-di,
> > cdrom-core-modules-2.6.18-3-486-di, pcmcia-modules-2.6.18-3-486-di
> > Description: PCMCIA storage drivers
> >
> > Package: acpi-modules-2.6.18-3-486-di
> > Status: install ok unpacked
> > Version: 1.40
> > Provides: acpi-modules
> > Depends: kernel-image-2.6.18-3-486-di
> > Description: ACPI support modules
> >
> > Package: preseed-common
> > Status: install ok unpacked
> > Version: 1.24
> > Depends: cdebconf-udeb, di-utils (>= 1.14)
> > Description: common files for preseeding
> >
> > Package: udpkg
> > Status: install ok unpacked
> > Version: 1.04
> > Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.41)
> > Description: tiny dpkg clone
> >
> > Package: localechooser
> > Status: install ok installed
> > Version: 1.34
> > Depends: cdebconf-udeb, iso-3166-udeb, di-utils (>= 1.15)
> > Description: choose language/country/locale
> > Installer-Menu-Item: 10
> >
> > Package: sata-modules-2.6.18-3-486-di
> > Status: install ok unpacked
> > Version: 1.40
> > Provides: sata-modules
> > Depends: kernel-image-2.6.18-3-486-di, scsi-core-modules-2.6.18-3-486-di
> > Description: SATA drivers
> >
> > Package: libnss-dns-udeb
> > Status: install ok unpacked
> > Version: 2.3.6.ds1-10
> > Description: GNU C Library: NSS helper for DNS - udeb
> >
> > Package: cdrom-checker
> > Status: install ok unpacked
> > Version: 1.09
> > Depends: cdrom-detect, cdebconf-udeb (>= 0.31)
> > Description: Verify the cd contents
> > Installer-Menu-Item: 940
> >
> > Package: lowmemcheck
> > Status: install ok unpacked
> > Version: 1.24
> > Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03)
> > Description: detect low-memory systems and enter lowmem mode
> >
> > Package: cdrom-retriever
> > Status: install ok installed
> > Version: 1.12
> > Provides: retriever
> > Depends: cdebconf-udeb, cdrom-detect
> > Description: Fetch modules from a CDROM
> >
> > Package: main-menu
> > Status: install ok unpacked
> > Version: 1.16
> > Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb,
> > libdebian-installer4-udeb (>= 0.47), cdebconf-udeb
> > Description: Debian installer main menu
> >
> > Package: ttf-khmeros-udeb
> > Status: install ok unpacked
> > Version: 3.10-3
> > Provides: ttf-installer
> > Description: Debian-Installer font for the Khmer language of Cambodia
> >
> > Package: di-utils-shell
> > Status: install ok unpacked
> > Version: 1.43
> > Depends: cdebconf-udeb, di-utils (>= 1.18)
> > Description: Execute a shell
> > Installer-Menu-Item: 950
> >
> > Package: scsi-common-modules-2.6.18-3-486-di
> > Status: install ok unpacked
> > Version: 1.40
> > Provides: scsi-common-modules
> > Depends: kernel-image-2.6.18-3-486-di,
> > scsi-core-modules-2.6.18-3-486-di, cdrom-core-modules-2.6.18-3-486-di
> > Description: Very common SCSI drivers
> >
> > Package: ttf-dejavu-udeb
> > Status: install ok unpacked
> > Version: 2.13-1
> > Description: Vera font family derivate with additional characters
> >
> > Package: di-utils
> > Status: install ok installed
> > Version: 1.43
> > Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.47),
> > cdebconf-udeb
> > Description: Miscellaneous utilities for the debian installer
> >
> > Package: firewire-core-modules-2.6.18-3-486-di
> > Status: install ok unpacked
> > Version: 1.40
> > Provides: firewire-core-modules
> > Depends: scsi-core-modules-2.6.18-3-486-di, kernel-image-2.6.18-3-486-di
> > Description: Core FireWire drivers
> >
> > Package: floppy-modules-2.6.18-3-486-di
> > Status: install ok unpacked
> > Version: 1.40
> > Provides: floppy-modules
> > Depends: kernel-image-2.6.18-3-486-di
> > Description: Floppy driver
> >
> > Package: ttf-cjk-compact-udeb
> > Status: install ok unpacked
> > Version: 1.8
> > Description: Shrinked CJK TrueType fonts for GUI d-i.
> >
> > Package: cdebconf-newt-udeb
> > Status: install ok unpacked
> > Version: 0.112
> > Depends: cdebconf-udeb, di-utils-terminfo, libc6 (>= 2.3.6-6),
> > libnewt0.52
> > Description: Newt frontend for Debian Configuration Management System
> >
> > Package: ttf-freefont-udeb
> > Status: install ok unpacked
> > Version: 20060501cvs-10
> > Provides: ttf-installer
> > Description: Freefont Sans fonts for the graphical installer
> >
> > Package: module-init-tools-udeb
> > Status: install ok unpacked
> > Version: 3.3-pre4-1
> > Depends: libc6 (>= 2.3.6-6)
> > Description: tools for managing Linux kernel modules
> >
> > Package: rootskel
> > Status: install ok installed
> > Version: 1.49
> > Depends: di-utils (>= 1.43), cdebconf-udeb
> > Description: Skeleton root filesystem used by debian-installer
> >
> > Package: libgtk-directfb-2.0-0-udeb
> > Status: install ok unpacked
> > Version: 2.8.20-5
> > Depends: libatk1.0-udeb (>= 1.12.2), libc6 (>= 2.3.6-6),
> > libcairo-directfb2-udeb (>= 1.2.4), libdirectfb-0.9-25-udeb,
> > libglib2.0-udeb (>= 2.12.0), libpango1.0-udeb (>= 1.14.8),
> > libpng12-0-udeb (>= 1.2.13-4)
> > Description: The GTK+ graphical user interface library - minimal runtime
> >
> > Package: udev-udeb
> > Status: install ok unpacked
> > Version: 0.103-2
> > Depends: libc6 (>= 2.3.6-6)
> > Description: /dev/ and hotplug management daemon
> >
> > Package: libpng12-0-udeb
> > Status: install ok unpacked
> > Version: 1.2.15~beta5-1
> > Depends: libc6 (>= 2.3.6-6), zlib1g-udeb (>= 1:1.2.1)
> > Description: PNG library - minimal runtime library
> >
> > Package: usb-serial-modules-2.6.18-3-486-di
> > Status: install ok unpacked
> > Version: 1.40
> > Provides: usb-serial-modules
> > Depends: kernel-image-2.6.18-3-486-di, usb-modules-2.6.18-3-486-di
> > Description: USB serial drivers
> >
> > Package: libnss-files-udeb
> > Status: install ok unpacked
> > Version: 2.3.6.ds1-10
> > Description: GNU C Library: NSS helper for files - udeb
> >
> > Package: brltty-udeb
> > Status: install ok unpacked
> > Version: 3.7.2-7
> > Depends: libc6 (>= 2.3.6-6)
> > Description: Access software for a blind person using a soft braille
> > terminal
> >
> > Package: libfribidi0-udeb
> > Status: install ok unpacked
> > Version: 0.10.7-4
> > Depends: libc6 (>= 2.3.6-6)
> > Description: Free Implementation of the Unicode BiDi algorithm
> >
> > Package: libcairo-directfb2-udeb
> > Status: install ok unpacked
> > Version: 1.2.4-4
> > Depends: fontconfig-udeb (>= 2.4.0), libc6 (>= 2.3.6-6),
> > libdirectfb-0.9-25-udeb, libfreetype6-udeb (>= 2.2), libpng12-0-udeb (>=
> > 1.2.8rel), zlib1g-udeb (>= 1:1.2.1)
> > Description: The Cairo 2D vector graphics library DirectFB build
> >
> > Package: libtextwrap1-udeb
> > Status: install ok installed
> > Version: 0.1-5
> > Depends: libc6 (>= 2.3.6-6)
> > Description: text-wrapping library with i18n - runtime udeb
> >
> > Package: gtk2-engines-udeb
> > Status: install ok unpacked
> > Version: 1:2.8.2-1
> > Depends: libatk1.0-udeb (>= 1.12.2), libc6 (>= 2.3.6-6),
> > libcairo-directfb2-udeb (>= 1.2.4), libdirectfb-0.9-25-udeb,
> > libglib2.0-udeb (>= 2.12.0), libgtk-directfb-2.0-0-udeb (>= 2.8.0),
> > libpango1.0-udeb (>= 1.14.7)
> > Description: theme engines for GTK+ 2.x in the Debian installer
> >
> > Package: auto-install
> > Status: install ok unpacked
> > Version: 0.02
> > Depends: netcfg, preseed-common (>= 1.18)
> > Description: Support for automatic installs
> > Installer-Menu-Item: 19
> >
> > Package: serial-modules-2.6.18-3-486-di
> > Status: install ok unpacked
> > Version: 1.40
> > Provides: serial-modules
> > Depends: kernel-image-2.6.18-3-486-di, pcmcia-modules-2.6.18-3-486-di
> > Description: Serial drivers
> >
> > Package: usb-discover
> > Status: install ok unpacked
> > Version: 1.06
> > Depends: cdebconf-udeb
> > Description: Discover USB and load kernel modules
> >
> > Package: rescue-check
> > Status: install ok unpacked
> > Version: 1.7
> > Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03), di-utils (>=
> > 1.18)
> > Description: enter d-i rescue mode if requested
> >
> > Package: nano-udeb
> > Status: install ok unpacked
> > Version: 2.0.2-1
> > Provides: editor
> > Depends: libc6 (>= 2.3.6-6), libslang2-udeb (>= 2.0.6-3)
> > Description: free Pico clone with some new features - tiny build
> >
> > Package: rootskel-gtk
> > Status: install ok unpacked
> > Version: 1.05
> > Depends: cdebconf-udeb, rootskel, mouse-modules, gtk2-engines-udeb
> > Description: Additions for graphical installs to skeleton root
> > filesystem (debian-installer)
> >
> > Package: cdebconf-udeb
> > Status: install ok installed
> > Version: 0.112
> > Provides: debconf-2.0
> > Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.47),
> > libtextwrap1-udeb
> > Description: Debian Configuration Management System (C-implementation)
> >
> > Package: scsi-core-modules-2.6.18-3-486-di
> > Status: install ok unpacked
> > Version: 1.40
> > Provides: scsi-core-modules
> > Depends: kernel-image-2.6.18-3-486-di
> > Description: Core SCSI subsystem
> >
> > Package: ai-choosers
> > Status: install ok unpacked
> > Version: 0.02
> > Depends: kbd-chooser (>= 1.30), localechooser (>= 1.23)
> > Description: Delayed configuration of locale and keyboard for
> > auto-install
> > Installer-Menu-Item: 22
> >
> > Package: libpango1.0-udeb
> > Status: install ok unpacked
> > Version: 1.14.8-5
> > Depends: fontconfig-udeb (>= 2.4.0), libc6 (>= 2.3.6-6),
> > libcairo-directfb2-udeb (>= 1.2.4), libfreetype6-udeb (>= 2.2),
> > libglib2.0-udeb (>= 2.12.0), zlib1g-udeb (>= 1:1.2.1)
> > Description: Layout and rendering of internationalized text
> >
> > Package: libiw28-udeb
> > Status: install ok installed
> > Version: 28-1
> > Depends: libc6 (>= 2.3.5-1)
> > Description: Tools for manipulating Linux Wireless Extensions
> >
> > Package: fb-modules-2.6.18-3-486-di
> > Status: install ok unpacked
> > Version: 1.40
> > Provides: fb-modules
> > Depends: kernel-image-2.6.18-3-486-di
> > Description: Frame buffer support
> >
> > Package: load-cdrom
> > Status: install ok installed
> > Version: 1.12
> > Depends: cdebconf-udeb, cdrom-retriever, anna (>= 1.07)
> > Description: Load installer components from CD
> > Installer-Menu-Item: 16
> >
> > Package: cdebconf-text-udeb
> > Status: install ok unpacked
> > Version: 0.112
> > Depends: cdebconf-udeb, libc6 (>= 2.3.6-6)
> > Description: Plain text frontend for Debian Configuration Management
> > System
> >
> > Package: cdrom-core-modules-2.6.18-3-486-di
> > Status: install ok unpacked
> > Version: 1.40
> > Provides: cdrom-core-modules
> > Depends: kernel-image-2.6.18-3-486-di,
> > scsi-core-modules-2.6.18-3-486-di, ide-modules-2.6.18-3-486-di
> > Description: CDROM support
> >
> > Package: libfreetype6-udeb
> > Status: install ok unpacked
> > Version: 2.2.1-5
> > Depends: libc6 (>= 2.3.6-6), zlib1g-udeb (>= 1:1.2.1)
> > Description: FreeType 2 font engine for the debian-installer
> >
> > Package: iso-3166-udeb
> > Status: install ok installed
> > Version: 1.0a-1
> > Description: provides iso_3166.tab file
> >
> > Package: pcmcia-modules-2.6.18-3-486-di
> > Status: install ok unpacked
> > Version: 1.40
> > Provides: pcmcia-modules
> > Depends: kernel-image-2.6.18-3-486-di, firmware-modules-2.6.18-3-486-di
> > Description: Common PCMCIA drivers
> >
> > Package: parport-modules-2.6.18-3-486-di
> > Status: install ok unpacked
> > Version: 1.40
> > Provides: parport-modules
> > Depends: kernel-image-2.6.18-3-486-di
> > Description: Parallel port support
> >
> > Package: ttf-malayalam-fonts-udeb
> > Status: install ok unpacked
> > Version: 1:0.4.8
> > Provides: ttf-installer
> > Description: Free TrueType fonts for the Malayalam language
> >
> > Package: kernel-image-2.6.18-3-486-di
> > Status: install ok unpacked
> > Version: 1.40
> > Provides: kernel-image, ext2-modules
> > Description: Linux kernel binary image for the Debian installer
> >
> > Package: ttf-farsiweb-udeb
> > Status: install ok unpacked
> > Version: 0.4.dfsg-6
> > Provides: ttf-installer
> > Description: Farsiweb TrueType fonts for the graphical installer
> >
> > Package: floppy-retriever
> > Status: install ok unpacked
> > Version: 1.12
> > Provides: retriever
> > Depends: cdebconf-udeb, mountfloppy
> > Description: Fetches modules from a floppy
> >
> > Package: ethdetect
> > Status: install ok installed
> > Version: 1.48
> > Provides: ethernet-card-detection
> > Depends: rootskel (>= 1.30), cdebconf-udeb (>= 0.38), hw-detect,
> > di-utils (>= 1.13)
> > Description: Detect network hardware and load kernel drivers for it
> > Installer-Menu-Item: 17
> >
> > Package: libexpat1-udeb
> > Status: install ok unpacked
> > Version: 1.95.8-3.4
> > Provides: libexpat1
> > Depends: libc6 (>= 2.3.6-6)
> > Description: XML parsing C library - runtime library
> >
> > Package: busybox-udeb
> > Status: install ok unpacked
> > Version: 1:1.1.3-4
> > Depends: libc6 (>= 2.3.6-6)
> > Description: Tiny utilities for the debian-installer
> >
> > Package: initrd-preseed
> > Status: install ok unpacked
> > Version: 1.24
> > Depends: preseed-common
> > Description: load debconf preseed file from /preseed.cfg on the initrd
> >
> > Package: firmware-modules-2.6.18-3-486-di
> > Status: install ok unpacked
> > Version: 1.40
> > Provides: firmware-modules
> > Depends: kernel-image-2.6.18-3-486-di
> > Description: Firmware request modules
> >
> > Package: archdetect
> > Status: install ok installed
> > Version: 1.48
> > Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.47)
> > Description: Hardware architecture detector
> >
> > Package: ttf-bpg-georgian-fonts-udeb
> > Status: install ok unpacked
> > Version: 0.3
> > Provides: ttf-installer
> > Description: BPG Georgian fonts for the graphical installer
> >
> > Package: cdrom-modules-2.6.18-3-486-di
> > Status: install ok unpacked
> > Version: 1.40
> > Provides: cdrom-modules
> > Depends: ide-modules-2.6.18-3-486-di,
> > cdrom-core-modules-2.6.18-3-486-di, kernel-image-2.6.18-3-486-di
> > Description: Esoteric CDROM drivers
> >
> > Package: ide-core-modules-2.6.18-3-486-di
> > Status: install ok unpacked
> > Version: 1.40
> > Provides: ide-core-modules
> > Depends: kernel-image-2.6.18-3-486-di
> > Description: IDE support
> >
> > Package: save-logs
> > Status: install ok unpacked
> > Version: 2.27
> > Depends: cdebconf-udeb
> > Description: save logs and configuration for debug purposes
> > Installer-Menu-Item: 940
> >
> > Package: fat-modules-2.6.18-3-486-di
> > Status: install ok unpacked
> > Version: 1.40
> > Provides: fat-modules
> > Depends: kernel-image-2.6.18-3-486-di
> > Description: FAT filesystem support
> >
> > Package: input-modules-2.6.18-3-486-di
> > Status: install ok unpacked
> > Version: 1.40
> > Provides: input-modules
> > Depends: kernel-image-2.6.18-3-486-di, usb-modules-2.6.18-3-486-di
> > Description: Input devices support
> >
> > Package: di-utils-reboot
> > Status: install ok unpacked
> > Version: 1.43
> > Depends: cdebconf-udeb
> > Description: Reboot
> > Installer-Menu-Item: 995
> >
> > Package: anna
> > Status: install ok installed
> > Version: 1.25
> > Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb,
> > libdebian-installer4-udeb (>= 0.45), cdebconf-udeb
> > Description: anna's not nearly apt, but for the Debian installer, it
> > will do
> >
> > Package: libsysfs2-udeb
> > Status: install ok unpacked
> > Version: 2.1.0-1
> > Provides: libsysfs2
> > Depends: libc6 (>= 2.3.6-6)
> > Description: interface library to sysfs
> >
> > Package: pcmciautils-udeb
> > Status: install ok unpacked
> > Version: 014-3
> > Depends: udev-udeb, libc6 (>= 2.3.6-6), libsysfs2-udeb
> > Description: PCMCIA utilities for Linux 2.6
> >
> > Package: pciutils-udeb
> > Status: install ok unpacked
> > Version: 1:2.2.4-1
> > Depends: libc6 (>= 2.3.6-6), zlib1g-udeb (>= 1:1.2.1)
> > Description: Linux PCI Utilities (udeb)
> >
> > Package: console-keymaps-at
> > Status: install ok installed
> > Version: 2:1.01-6
> > Provides: console-keymaps
> > Depends: cdebconf-udeb
> > Description: Keymaps for PC-style (PS/2 and AT) keyboards
> >
> > Package: ttf-tamil-fonts-udeb
> > Status: install ok unpacked
> > Version: 1:0.4.8
> > Provides: ttf-installer
> > Description: Free TrueType fonts for the Tamil language
> >
> > Package: usb-modules-2.6.18-3-486-di
> > Status: install ok unpacked
> > Version: 1.40
> > Provides: usb-modules
> > Depends: kernel-image-2.6.18-3-486-di
> > Description: USB support
> >
> > Package: di-utils-terminfo
> > Status: install ok unpacked
> > Version: 1.43
> > Description: Terminfo entries needed by newt/slang in debian installer
> >
> > Package: libdirectfb-0.9-25-udeb
> > Status: install ok unpacked
> > Version: 0.9.25.1-5
> > Provides: libdirectfb-0.9-25
> > Depends: libc6 (>= 2.3.6-6), libfreetype6-udeb (>= 2.2), libpng12-0-udeb
> > (>= 1.2.8rel), libsysfs2-udeb, zlib1g-udeb (>= 1:1.2.1)
> > Description: direct frame buffer graphics - shared libraries
> >
> > Package: hw-detect
> > Status: install ok installed
> > Version: 1.48
> > Depends: rootskel (>= 1.30), archdetect, cdebconf-udeb (>= 0.75),
> > di-utils (>= 1.26)
> > Description: Detect hardware and load kernel drivers for it
> >
> > Package: kbd-chooser
> > Status: install ok installed
> > Version: 1.31
> > Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb,
> > libdebian-installer4-udeb (>= 0.45), cdebconf-udeb, console-keymaps
> > Description: Detect a keyboard and select layout
> > Installer-Menu-Item: 12
> >
> > Package: libdebian-installer4-udeb
> > Status: install ok installed
> > Version: 0.47
> > Depends: libc6 (>= 2.3.6-6)
> > Description: Library of common debian-installer functions
> >
> > Package: fontconfig-udeb
> > Status: install ok unpacked
> > Version: 2.4.2-1
> > Depends: fontconfig-udeb (>= 2.4.0), libc6 (>= 2.3.6-6), libexpat1-udeb
> > (>= 1.95.8), libfreetype6-udeb (>= 2.2), zlib1g-udeb (>= 1:1.2.1)
> > Description: generic font configuration library - minimal runtime
> >
> > Package: cdebconf-gtk-udeb
> > Status: install ok unpacked
> > Version: 0.112
> > Depends: cdebconf-udeb, libatk1.0-udeb (>= 1.12.2), libc6 (>= 2.3.6-6),
> > libcairo-directfb2-udeb (>= 1.2.4), libdirectfb-0.9-25-udeb,
> > libglib2.0-udeb (>= 2.12.0), libgtk-directfb-2.0-0-udeb (>= 2.8.0),
> > libpango1.0-udeb (>= 1.14.8), rootskel-gtk (>= 0.05)
> > Description: Gtk+ frontend for Debian Configuration Management System
> >
> > Package: installation-locale
> > Status: install ok unpacked
> > Version: 1.1
> > Depends: rootskel
> > Description: UTF-8 C locale
> >
> > Package: scsi-modules-2.6.18-3-486-di
> > Status: install ok unpacked
> > Version: 1.40
> > Provides: scsi-modules
> > Depends: kernel-image-2.6.18-3-486-di,
> > scsi-core-modules-2.6.18-3-486-di, parport-modules-2.6.18-3-486-di,
> > cdrom-core-modules-2.6.18-3-486-di, firmware-modules-2.6.18-3-486-di
> > Description: SCSI drivers
> >
> > Package: env-preseed
> > Status: install ok unpacked
> > Version: 1.24
> > Description: debconf preseeding via environment variables
> >
> > Package: mountfloppy
> > Status: install ok unpacked
> > Version: 0.9
> > Depends: cdebconf-udeb, di-utils (>= 1.15)
> > Description: Mounts a floppy
> >
> > Package: cdebconf-priority
> > Status: install ok unpacked
> > Version: 0.112
> > Depends: cdebconf-udeb
> > Description: Change debconf priority
> > Installer-Menu-Item: 930
> >
> > Package: netcfg
> > Status: install ok installed
> > Version: 1.32
> > Provides: configured-network
> > Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb,
> > libdebian-installer4-udeb (>= 0.47), libiw28-udeb (>= 28),
> > dhcp-client-udeb | dhcp3-client-udeb | pump-udeb,
> > ethernet-card-detection
> > Description: Configure the network
> > Installer-Menu-Item: 18
> >
> > Package: file-preseed
> > Status: install ok unpacked
> > Version: 1.24
> > Depends: cdebconf-udeb, di-utils, preseed-common
> > Description: load debconf preseed file
> > Installer-Menu-Item: 14
> >
> > Package: ttf-tmuni-udeb
> > Status: install ok unpacked
> > Version: 0.0.20040806-1.2
> > Provides: ttf-installer
> > Description: font for Tibetan, Dzongkha and Ladakhi (OpenType Unicode)
> >
> > Package: zlib1g-udeb
> > Status: install ok unpacked
> > Version: 1:1.2.3-13
> > Provides: zlib1g
> > Description: compression library - runtime for Debian installer
> >
> > Package: libglib2.0-udeb
> > Status: install ok unpacked
> > Version: 2.12.6-2
> > Depends: libc6 (>= 2.3.6-6)
> > Description: The GLib library of C routines
> >
> > Package: libdebconfclient0-udeb
> > Status: install ok installed
> > Version: 0.112
> > Depends: libc6 (>= 2.3.6-6), cdebconf-udeb
> > Description: Debian Configuration Management System (C-implementation)
> >
> > Package: usb-storage-modules-2.6.18-3-486-di
> > Status: install ok unpacked
> > Version: 1.40
> > Provides: usb-storage-modules
> > Depends: ide-core-modules-2.6.18-3-486-di,
> > scsi-core-modules-2.6.18-3-486-di, usb-modules-2.6.18-3-486-di
> > Description: USB storage support
> >
> > Package: bogl-bterm-udeb
> > Status: install ok unpacked
> > Version: 0.1.18-1.5
> > Provides: editor
> > Depends: libc-udeb
> > Description: Ben's Own Graphics Library - graphical terminal
> >
> > Package: libatk1.0-udeb
> > Status: install ok unpacked
> > Version: 1.12.4-1
> > Depends: libc6 (>= 2.3.6-6), libglib2.0-udeb (>= 2.12.0)
> > Description: The ATK accessibility toolkit
> >
> > Package: mouse-modules-2.6.18-3-486-di
> > Status: install ok unpacked
> > Version: 1.40
> > Provides: mouse-modules
> > Depends: kernel-image-2.6.18-3-486-di, input-modules-2.6.18-3-486-di,
> > usb-modules-2.6.18-3-486-di
> > Description: Mouse support
> >
> > Package: cdrom-detect
> > Status: install ok installed
> > Version: 1.18
> > Depends: cdebconf-udeb, hw-detect, di-utils (>= 1.33)
> > Description: Detect CDROM devices and mount the CD
> > Installer-Menu-Item: 13
> >
> > Package: ide-modules-2.6.18-3-486-di
> > Status: install ok unpacked
> > Version: 1.40
> > Provides: ide-modules
> > Depends: kernel-image-2.6.18-3-486-di, ide-core-modules-2.6.18-3-486-di
> > Description: IDE drivers
> >
> > Package: debian-installer
> > Status: install ok installed
> > Version: cdrom-gtk-20070127-03:51
> > Description: debian installation image
> >
> > Package: apt-cdrom-setup
> > Status: install ok installed
> > Priority: extra
> > Section: debian-installer
> > Installed-Size: 44
> > Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
> > Version: 1:0.16
> > Depends: cdrom-detect, cdebconf-udeb
> > Provides: apt-mirror-setup
> > Description: set up a CD in sources.list
> >
> > Package: apt-mirror-setup
> > Status: install ok installed
> > Priority: extra
> > Section: debian-installer
> > Installed-Size: 152
> > Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
> > Version: 1:0.16
> > Depends: choose-mirror-bin, cdebconf-udeb
> > Description: set up a mirror in sources.list
> >
> > Package: apt-setup-udeb
> > Status: install ok installed
> > Priority: standard
> > Section: debian-installer
> > Installed-Size: 100
> > Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
> > Version: 1:0.16
> > Depends: apt-mirror-setup, base-installer (>= 1.49), cdebconf-udeb
> > Description: Configure apt
> > Installer-Menu-Item: 70
> >
> > Package: base-installer
> > Status: install ok installed
> > Priority: required
> > Section: debian-installer
> > Installed-Size: 632
> > Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
> > Version: 1.71
> > Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb,
> > libdebian-installer4-udeb (>= 0.47), mounted-partitions,
> > debootstrap-udeb (>= 0.3.1), created-fstab, archdetect,
> > di-utils-mapdevfs, di-utils (>= 1.16), rootskel (>= 1.19)
> > Provides: kernel-installer
> > Description: Install the base system
> > Installer-Menu-Item: 65
> >
> > Package: choose-mirror-bin
> > Status: install ok installed
> > Priority: extra
> > Section: debian-installer
> > Installed-Size: 336
> > Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
> > Version: 2.11
> > Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb,
> > libdebian-installer4-udeb (>= 0.47), cdebconf-udeb
> > Description: Choose mirror to install from (program)
> >
> > Package: clock-setup
> > Status: install ok installed
> > Priority: standard
> > Section: debian-installer
> > Installed-Size: 72
> > Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
> > Version: 0.12
> > Depends: cdebconf-udeb, os-prober, tzsetup-udeb
> > Description: set up clock
> > Installer-Menu-Item: 62
> >
> > Package: crc-modules-2.6.18-3-486-di
> > Status: install ok installed
> > Priority: extra
> > Section: debian-installer
> > Installed-Size: 32
> > Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
> > Version: 1.40
> > Depends: kernel-image-2.6.18-3-486-di
> > Provides: crc-modules
> > Description: CRC modules
> > This package contains CRC support modules.
> >
> > Package: debootstrap-udeb
> > Status: install ok installed
> > Priority: required
> > Section: debian-installer
> > Installed-Size: 224
> > Maintainer: Anthony Towns <ajt@debian.org>
> > Version: 0.3.3.1
> > Depends: libc6 (>= 2.3.6-6), mounted-partitions
> > Description: Bootstrap the Debian system
> > debootstrap is used to create a Debian base system from scratch,
> > without requiring the availability of dpkg or apt. It does this by
> > downloading .deb files from a mirror site, and carefully unpacking them
> > into a directory which can eventually be chrooted into.
> > .
> > debootstrap-udeb is a minimal package used by debian-installer.
> >
> > Package: dhcp-client-udeb
> > Status: install ok installed
> > Priority: optional
> > Section: debian-installer
> > Installed-Size: 132
> > Maintainer: Eloy A. Paris <peloy@debian.org>
> > Version: 2.0pl5-19.5
> > Depends: libc6 (>= 2.3.6-6)
> > Description: DHCP Client for debian-installer
> > dhcp-client-udeb is a minimal dhcp package used by the
> > debian-installer.
> >
> > Package: di-utils-mapdevfs
> > Status: install ok installed
> > Priority: standard
> > Section: debian-installer
> > Installed-Size: 16
> > Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
> > Version: 1.43
> > Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.47)
> > Description: mapdevfs utility for the debian installer
> >
> > Package: disk-detect
> > Status: install ok installed
> > Priority: optional
> > Section: debian-installer
> > Installed-Size: 64
> > Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
> > Version: 1.48
> > Depends: cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13)
> > Provides: harddrive-detection
> > Description: Detect disk drives
> > Installer-Menu-Item: 35
> >
> > Package: dmidecode-udeb
> > Status: install ok installed
> > Priority: optional
> > Section: debian-installer
> > Installed-Size: 64
> > Maintainer: Petter Reinholdtsen <pere@debian.org>
> > Version: 2.8-4
> > Depends: libc6 (>= 2.3.6-6)
> > Description: Dump Desktop Management Interface data (udeb)
> >
> > Package: e2fsprogs-udeb
> > Status: install ok installed
> > Priority: optional
> > Section: debian-installer
> > Installed-Size: 356
> > Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
> > Version: 1.39+1.40-WIP-2006.11.14+dfsg-1
> > Depends: libblkid1-udeb, libc6 (>= 2.3.6-6)
> > Description: stripped-down versions of e2fsprogs, for debian-installer
> > This package is an e2fsprogs package built for a reduced size, so that
> > it can help to save space in debian-installer.
> > .
> > Don't attempt to install this package, it has no support for a couple
> > of
> > features you surely want. Anyway it should refuse to install.
> >
> > Package: efi-modules-2.6.18-3-486-di
> > Status: install ok installed
> > Priority: extra
> > Section: debian-installer
> > Installed-Size: 44
> > Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
> > Version: 1.40
> > Depends: kernel-image-2.6.18-3-486-di
> > Provides: efi-modules
> > Description: EFI modules
> > This package contains EGI modules.
> >
> > Package: elilo-installer
> > Status: install ok unpacked
> > Priority: standard
> > Section: debian-installer
> > Installed-Size: 100
> > Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
> > Version: 1.8
> > Depends: cdebconf-udeb, base-installer, partconf-find-partitions (>=
> > 1.08), di-utils-mapdevfs, fat-modules, efi-modules, dmidecode-udeb (>=
> > 2.7)
> > Provides: bootable-system
> > Description: Install elilo on a hard disk
> > Installer-Menu-Item: 76
> >
> > Package: ext3-modules-2.6.18-3-486-di
> > Status: install ok installed
> > Priority: standard
> > Section: debian-installer
> > Installed-Size: 240
> > Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
> > Version: 1.40
> > Depends: kernel-image-2.6.18-3-486-di
> > Provides: ext3-modules
> > Description: EXT3 filesystem support
> > This package contains the EXT3 filesystem module for the Linux kernel.
> >
> > Package: fdisk-udeb
> > Status: install ok installed
> > Priority: extra
> > Section: debian-installer
> > Installed-Size: 136
> > Maintainer: LaMont Jones <lamont@debian.org>
> > Version: 2.12r-16
> > Depends: libc6 (>= 2.3.6-6)
> > Description: Partition a hard drive (manual)
> > fdisk package
> >
> > Package: finish-install
> > Status: install ok unpacked
> > Priority: required
> > Section: debian-installer
> > Installed-Size: 108
> > Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
> > Version: 2.7
> > Depends: cdebconf-udeb, archdetect, base-installer, created-fstab,
> > bootable-system
> > Provides: prebaseconfig
> > Description: Finish the installation and reboot
> > Installer-Menu-Item: 78
> >
> > Package: grub-installer
> > Status: install ok installed
> > Priority: standard
> > Section: debian-installer
> > Installed-Size: 364
> > Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
> > Version: 1.20
> > Depends: cdebconf-udeb, kernel-installer, created-fstab, di-utils (>=
> > 1.15), di-utils-mapdevfs, os-prober, dmidecode-udeb (>= 2.7)
> > Provides: bootable-system
> > Description: Install GRUB on a hard disk
> > Installer-Menu-Item: 73
> >
> > Package: jfs-modules-2.6.18-3-486-di
> > Status: install ok installed
> > Priority: standard
> > Section: debian-installer
> > Installed-Size: 216
> > Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
> > Version: 1.40
> > Depends: kernel-image-2.6.18-3-486-di
> > Provides: jfs-modules
> > Description: JFS filesystem support
> > This package contains the JFS filesystem module for the Linux kernel.
> >
> > Package: jfsutils-udeb
> > Status: install ok installed
> > Priority: optional
> > Section: debian-installer
> > Installed-Size: 984
> > Maintainer: Stefan Hornburg (Racke) <racke@linuxia.de>
> > Version: 1.1.11-1
> > Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
> > Description: A stripped-down version of jfsutils, for debian-installer
> > This package is a jfsutils package built for reduced size, so that it
> > can help to save space in debian-installer.
> > .
> > Don't attempt to install this package, it has no support for a couple
> > of
> > features you surely want. Anyway, it should fail to install.
> >
> > Package: libblkid1-udeb
> > Status: install ok installed
> > Priority: optional
> > Section: debian-installer
> > Installed-Size: 40
> > Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
> > Version: 1.39+1.40-WIP-2006.11.14+dfsg-1
> > Depends: libc6 (>= 2.3.6-6)
> > Provides: libblkid1
> > Description: block device id library
> > The blkid library which allows system programs like fsck and
> > mount to quickly and easily find block devices by filesystem UUID and
> > LABEL. This allows system administrators to avoid specifiying
> > filesystems by hard-coded device names, but via a logical naming
> > system instead.
> > .
> > This is a minimal package for debian-installer.
> >
> > Package: libc6-udeb
> > Status: install ok installed
> > Priority: extra
> > Section: debian-installer
> > Installed-Size: 1584
> > Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
> > Version: 2.3.6.ds1-10
> > Provides: libc6, libc-udeb, glibc-2.3.6.ds1-1, glibc-2.3.6-2
> > Description: GNU C Library: Shared libraries - udeb
> > Contains the standard libraries that are used by nearly all programs on
> > the system. This package includes shared versions of the standard C
> > library
> > and the standard math library, as well as many others.
> > .
> > This package contains a minimal set of libraries needed for the Debian
> > installer. Do not install it on a normal system.
> >
> > Package: libdevmapper1.02-udeb
> > Status: install ok installed
> > Priority: optional
> > Section: debian-installer
> > Installed-Size: 72
> > Maintainer: Debian LVM Team
> > <pkg-lvm-maintainers@lists.alioth.debian.org>
> > Version: 2:1.02.12-1
> > Depends: libc6 (>= 2.3.6-6)
> > Provides: libdevmapper1.02
> > Description: The Linux Kernel Device Mapper userspace library
> > This is a udeb, or a microdeb, for the debian-installer.
> > .
> > The Linux Kernel Device Mapper is the LVM (Linux Logical Volume
> > Management)
> > Team's implementation of a minimalistic kernel-space driver that
> > handles
> > volume management, while keeping knowledge of the underlying device
> > layout
> > in user-space. This makes it useful for not only LVM, but EVMS,
> > software
> > raid, and other drivers that create "virtual" block devices.
> >
> > Package: libparted1.7-udeb
> > Status: install ok installed
> > Priority: extra
> > Section: debian-installer
> > Installed-Size: 340
> > Maintainer: Parted Maintainer Team
> > <parted-maintainers@lists.alioth.debian.org>
> > Version: 1.7.1-5
> > Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
> > Provides: libparted1.7-1
> > Description: The GNU Parted disk partitioning shared library
> > GNU Parted is a program that allows you to create, destroy,
> > resize, move and copy hard disk partitions. This is useful
> > for creating space for new operating systems, reorganising
> > disk usage, and copying data to new hard disks. This package
> > contains the Parted binary and manual page.
> > .
> > This package contains libparted, the required shared library
> > used by Parted. This is a cut-down package with no normal
> > documentation intended to be used in debian-installer.
> > .
> > Parted currently supports DOS, Mac, Sun, BSD, GPT, MIPS and
> > PC98 disklabels/partition tables, as well as a 'loop' (raw
> > disk) type which allows use on RAID/LVM. Filesystems which
> > are currently fully supported are ext2, ext3, fat (FAT16
> > and FAT32), ReiserFS (with libreiserfs) and linux-swap.
> > Parted can also detect and remove HFS (Mac OS), JFS, NTFS,
> > UFS (Sun and HP), XFS and ASFS/AFFS/APFS (Amiga) filesystems,
> > but cannot create, resize or check these filesystems yet.
> > .
> > Note that ReiserFS support is only enabled if you install
> > the libreiserfs0.3-0 package. Since libreiserfs0.3-0 has been
> > removed from sarge, ReiserFS support is not compiled in the
> > default package.
> > .
> > The nature of this software means that any bugs could cause
> > massive data loss. While there are no known bugs at the moment,
> > they could exist, so please back up all important files before
> > running it, and do so at your own risk.
> >
> > Package: libuuid1-udeb
> > Status: install ok installed
> > Priority: optional
> > Section: debian-installer
> > Installed-Size: 24
> > Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
> > Version: 1.39+1.40-WIP-2006.11.14+dfsg-1
> > Depends: libc6 (>= 2.3.6-6)
> > Provides: libuuid1
> > Description: universally unique id library
> > libuuid generates and parses 128-bit universally unique id's (UUID's).
> > See RFC 4122 for more information.
> > .
> > This is a minimal package for debian-installer.
> >
> > Package: lilo-installer
> > Status: install ok unpacked
> > Priority: standard
> > Section: debian-installer
> > Installed-Size: 220
> > Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
> > Version: 1.18
> > Depends: cdebconf-udeb, kernel-installer, di-utils (>= 1.15),
> > di-utils-mapdevfs, fdisk-udeb, os-prober, dmidecode-udeb (>= 2.7)
> > Provides: bootable-system
> > Description: Install LILO on a hard disk
> > Installer-Menu-Item: 75
> >
> > Package: loop-modules-2.6.18-3-486-di
> > Status: install ok installed
> > Priority: standard
> > Section: debian-installer
> > Installed-Size: 52
> > Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
> > Version: 1.40
> > Depends: kernel-image-2.6.18-3-486-di
> > Provides: loop-modules
> > Description: Loopback filesystem support
> > This package contains loopback filesystem support for the Linux kernel.
> >
> > Package: lvm2-udeb
> > Status: install ok installed
> > Priority: optional
> > Section: debian-installer
> > Installed-Size: 428
> > Maintainer: Debian LVM Team
> > <pkg-lvm-maintainers@lists.alioth.debian.org>
> > Version: 2.02.06-3
> > Depends: libc6 (>= 2.3.6-6), libdevmapper1.02-udeb (>= 2:1.02.02-2)
> > Description: The Linux Logical Volume Manager
> > This is a udeb, or a microdeb, for the debian-installer.
> > .
> > This is LVM2, the rewrite of The Linux Logical Volume Manager. LVM
> > supports enterprise level volume management of disk and disk subsystems
> > by grouping arbitrary disks into volume groups. The total capacity of
> > volume groups can be allocated to logical volumes, which are accessed
> > as
> > regular block devices.
> >
> > Package: md-modules-2.6.18-3-486-di
> > Status: install ok installed
> > Priority: extra
> > Section: debian-installer
> > Installed-Size: 436
> > Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
> > Version: 1.40
> > Depends: kernel-image-2.6.18-3-486-di
> > Provides: md-modules
> > Description: RAID and LVM support
> > This package contains RAID and LVM modules for the Linux kernel.
> >
> > Package: mdadm-udeb
> > Status: install ok installed
> > Priority: optional
> > Section: debian-installer
> > Installed-Size: 176
> > Maintainer: Debian mdadm maintainers
> > <pkg-mdadm-devel@lists.alioth.debian.org>
> > Version: 2.5.6-8
> > Depends: libc6 (>= 2.3.6-6)
> > Description: tool to administer Linux MD arrays (software RAID)
> > mdadm is a program that can be used to create, manage, and monitor MD
> > arrays (e.g. software RAID, multipath devices).
> > .
> > mdadm-udeb is a minimal package used by the debian-installer.
> >
> > Package: mdcfg-utils
> > Status: install ok installed
> > Priority: optional
> > Section: debian-installer
> > Installed-Size: 384
> > Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
> > Version: 1.19
> > Depends: cdebconf-udeb, di-utils (>= 1.16), md-modules, mdadm-udeb (>=
> > 2.5.2), partconf-find-partitions
> > Description: Configure MD devices
> > Use this module to configure the MD devices.
> >
> > Package: mkreiserfs-udeb
> > Status: install ok installed
> > Priority: standard
> > Section: debian-installer
> > Installed-Size: 144
> > Maintainer: Ed Boraas <ed@debian.org>
> > Version: 1:3.6.19-4
> > Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
> > Description: User-level tools for ReiserFS filesystems
> > This installer module contains the utility to create ReiserFS
> > filesystems.
> > .
> > Homepage: http://www.namesys.com/
> >
> > Package: network-preseed
> > Status: install ok unpacked
> > Priority: standard
> > Section: debian-installer
> > Installed-Size: 40
> > Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
> > Version: 1.24
> > Depends: cdebconf-udeb, configured-network, preseed-common
> > Description: download debconf preseed file
> > Installer-Menu-Item: 21
> >
> > Package: nic-extra-modules-2.6.18-3-486-di
> > Status: install ok installed
> > Priority: standard
> > Section: debian-installer
> > Installed-Size: 3276
> > Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
> > Version: 1.40
> > Depends: kernel-image-2.6.18-3-486-di,
> > nic-shared-modules-2.6.18-3-486-di, firmware-modules-2.6.18-3-486-di,
> > crc-modules-2.6.18-3-486-di
> > Provides: nic-extra-modules
> > Description: Rare NIC drivers
> > This package contains rare NIC drivers for the Linux kernel.
> >
> > Package: nic-modules-2.6.18-3-486-di
> > Status: install ok installed
> > Priority: standard
> > Section: debian-installer
> > Installed-Size: 444
> > Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
> > Version: 1.40
> > Depends: kernel-image-2.6.18-3-486-di,
> > nic-shared-modules-2.6.18-3-486-di, firmware-modules-2.6.18-3-486-di,
> > firewire-core-modules-2.6.18-3-486-di
> > Provides: nic-modules
> > Description: Common NIC drivers
> > This package contains common NIC drivers for the Linux kernel.
> >
> > Package: nic-pcmcia-modules-2.6.18-3-486-di
> > Status: install ok installed
> > Priority: standard
> > Section: debian-installer
> > Installed-Size: 572
> > Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
> > Version: 1.40
> > Depends: kernel-image-2.6.18-3-486-di,
> > nic-shared-modules-2.6.18-3-486-di, nic-extra-modules-2.6.18-3-486-di,
> > pcmcia-modules-2.6.18-3-486-di
> > Provides: nic-pcmcia-modules
> > Description: Common PCMCIA NIC drivers
> > This package contains common PCMCIA NIC drivers for the Linux kernel.
> >
> > Package: nic-shared-modules-2.6.18-3-486-di
> > Status: install ok installed
> > Priority: standard
> > Section: debian-installer
> > Installed-Size: 52
> > Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
> > Version: 1.40
> > Depends: kernel-image-2.6.18-3-486-di
> > Provides: nic-shared-modules
> > Description: Shared NIC drivers
> > This package contains NIC drivers needed by combinations of
> > nic-modules,
> > nic-extra-modules, and nic-pcmcia-modules.
> >
> > Package: nic-usb-modules-2.6.18-3-486-di
> > Status: install ok installed
> > Priority: standard
> > Section: debian-installer
> > Installed-Size: 208
> > Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
> > Version: 1.40
> > Depends: kernel-image-2.6.18-3-486-di,
> > nic-shared-modules-2.6.18-3-486-di, usb-modules-2.6.18-3-486-di,
> > firmware-modules-2.6.18-3-486-di
> > Provides: nic-usb-modules
> > Description: USB NIC drivers
> > This package contains USB network adapter drivers for the Linux kernel.
> >
> > Package: nobootloader
> > Status: install ok unpacked
> > Priority: standard
> > Section: debian-installer
> > Installed-Size: 156
> > Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
> > Version: 1.15
> > Depends: cdebconf-udeb, base-installer (>= 1.23), di-utils-mapdevfs
> > Provides: bootable-system
> > Description: Don't install any bootloader.
> > This package will skip installing a boot-loader
> > Installer-Menu-Item: 77
> >
> > Package: ntfsprogs-udeb
> > Status: install ok installed
> > Priority: optional
> > Section: debian-installer
> > Installed-Size: 244
> > Maintainer: David MartÃnez Moreno <ender@debian.org>
> > Version: 1.13.1-6
> > Depends: libc6 (>= 2.3.6-6)
> > Provides: ntfstools-udeb
> > Description: Tools for doing neat things in NTFS partitions from Linux -
> > udeb
> > Currently this udeb contains only ntfsresize.
> >
> > Package: os-prober-udeb
> > Status: install ok installed
> > Priority: optional
> > Section: debian-installer
> > Installed-Size: 128
> > Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
> > Version: 1.15
> > Depends: di-utils-mapdevfs, anna (>= 1.16)
> > Provides: os-prober
> > Description: utility to detect other OSes on a set of drives
> > This package is to be used by boot loader installers to detect other
> > OSes
> > available on a system, in a generic format, which it can then adapt to
> > its
> > own configuration format.
> >
> > Package: partconf-find-partitions
> > Status: install ok installed
> > Priority: optional
> > Section: debian-installer
> > Installed-Size: 32
> > Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
> > Version: 1.19
> > Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.45),
> > libparted1.7-udeb (>= 1.7.1-1)
> > Description: debian-installer utility for finding partitions
> > Helper program for finding partitions and detecting their size and
> > existing file system.
> >
> > Package: parted-udeb
> > Status: install ok installed
> > Priority: extra
> > Section: debian-installer
> > Installed-Size: 68
> > Maintainer: Parted Maintainer Team
> > <parted-maintainers@lists.alioth.debian.org>
> > Version: 1.7.1-5
> > Depends: libc6 (>= 2.3.6-6), libparted1.7-udeb (>= 1.7.1-1)
> > Provides: parted
> > Description: The GNU Parted disk partition resizing program
> > GNU Parted is a program that allows you to create, destroy,
> > resize, move and copy hard disk partitions. This is useful
> > for creating space for new operating systems, reorganising
> > disk usage, and copying data to new hard disks. This package
> > contains the Parted binary and manual page.
> > .
> > This package is similar to the "big" parted package, but has
> > less cosmetical features resulting in smaller binary. Intended
> > to be used in debian-installer.
> > .
> > .
> > The nature of this software means that any bugs could cause
> > massive data loss. While there are no known bugs at the moment,
> > they could exist, so please back up all important files before
> > running it, and do so at your own risk.
> >
> > Package: partman-auto
> > Status: install ok installed
> > Priority: standard
> > Section: debian-installer
> > Installed-Size: 392
> > Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
> > Version: 65
> > Depends: cdebconf-udeb, di-utils, partman-base (>= 99),
> > partman-basicfilesystems, partman-ext3
> > Description: Automatically partition storage devices (partman)
> >
> > Package: partman-auto-crypto
> > Status: install ok installed
> > Priority: standard
> > Section: debian-installer
> > Installed-Size: 48
> > Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
> > Version: 3
> > Depends: cdebconf-udeb, partman-auto (>= 55), partman-auto-lvm (>= 14),
> > partman-crypto (>= 13), partman-base (>= 87)
> > Description: Automatically partition storage devices using crypto and
> > LVM
> >
> > Package: partman-auto-lvm
> > Status: install ok installed
> > Priority: standard
> > Section: debian-installer
> > Installed-Size: 160
> > Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
> > Version: 20
> > Depends: cdebconf-udeb, partman-base (>= 73), partman-auto (>= 59),
> > partman-lvm (>= 36), di-utils (>= 1.15), lvm2-udeb
> > Description: Automatically partition storage devices using LVM
> >
> > Package: partman-auto-raid
> > Status: install ok installed
> > Priority: standard
> > Section: debian-installer
> > Installed-Size: 68
> > Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
> > Version: 3
> > Depends: cdebconf-udeb, partman-base (>= 99), partman-basicfilesystems,
> > partman-ext3, partman-auto (>= 58), partman-md
> > Description: Allow preseeded RAID installs
> >
> > Package: partman-base
> > Status: install ok installed
> > Priority: standard
> > Section: debian-installer
> > Installed-Size: 872
> > Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
> > Version: 102
> > Depends: libc6 (>= 2.3.6-6), libparted1.7-udeb (>= 1.7.1-1),
> > cdebconf-udeb, partman-partitioning, partman-target, archdetect,
> > harddrive-detection, di-utils-mapdevfs, di-utils (>= 1.15)
> > Provides: made-filesystems, mounted-partitions, partitioned-harddrives,
> > created-fstab
> > Description: Partition the storage devices (partman)
> > Installer-Menu-Item: 42
> >
> > Package: partman-basicfilesystems
> > Status: install ok installed
> > Priority: standard
> > Section: debian-installer
> > Installed-Size: 600
> > Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
> > Version: 50
> > Depends: cdebconf-udeb, e2fsprogs-udeb, ext2-modules, fat-modules,
> > di-utils (>= 1.14)
> > Provides: partman-filesystem
> > Description: Add to partman support for ext2, linux-swap, fat16 and
> > fat32
> >
> > Package: partman-basicmethods
> > Status: install ok installed
> > Priority: optional
> > Section: debian-installer
> > Installed-Size: 124
> > Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
> > Version: 32
> > Depends: cdebconf-udeb
> > Provides: partman-method
> > Description: Basic partition usage methods for partman
> > This package provides partman with two methods to use partitions.
> > The first is to format the partition. The second is to keep and use
> > the existing data in the partition as it is.
> >
> > Package: partman-crypto
> > Status: install ok installed
> > Priority: standard
> > Section: debian-installer
> > Installed-Size: 876
> > Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
> > Version: 18
> > Depends: partman-base (>= 87), libc6 (>= 2.3.6-6), cdebconf-udeb
> > Description: Add to partman support for block device encryption
> >
> > Package: partman-efi
> > Status: install ok installed
> > Priority: standard
> > Section: debian-installer
> > Installed-Size: 132
> > Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
> > Version: 11
> > Depends: partman-base
> > Description: Add to partman support for EFI boot partitions
> >
> > Package: partman-ext3
> > Status: install ok installed
> > Priority: standard
> > Section: debian-installer
> > Installed-Size: 228
> > Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
> > Version: 44
> > Depends: cdebconf-udeb, e2fsprogs-udeb, ext3-modules,
> > partman-basicfilesystems, di-utils (>= 1.14)
> > Provides: partman-filesystem
> > Description: Add to partman support for ext3
> >
> > Package: partman-jfs
> > Status: install ok installed
> > Priority: standard
> > Section: debian-installer
> > Installed-Size: 272
> > Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
> > Version: 19
> > Depends: cdebconf-udeb, jfsutils-udeb, jfs-modules,
> > partman-basicfilesystems, di-utils (>= 1.14)
> > Provides: partman-filesystem
> > Description: Add support for jfs to partman
> >
> > Package: partman-lvm
> > Status: install ok installed
> > Priority: standard
> > Section: debian-installer
> > Installed-Size: 732
> > Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
> > Version: 49
> > Depends: cdebconf-udeb, partman-base (>= 87), di-utils (>= 1.14),
> > md-modules, lvm2-udeb, parted-udeb
> > Description: Adds support for LVM to partman
> >
> > Package: partman-md
> > Status: install ok installed
> > Priority: standard
> > Section: debian-installer
> > Installed-Size: 156
> > Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
> > Version: 30
> > Depends: cdebconf-udeb, mdadm-udeb, mdcfg-utils, partman-base (>= 87)
> > Description: Add to partman support for MD
> >
> > Package: partman-partitioning
> > Status: install ok installed
> > Priority: optional
> > Section: debian-installer
> > Installed-Size: 364
> > Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
> > Version: 44
> > Depends: ntfsprogs-udeb, cdebconf-udeb
> > Description: Partitioning operations for partman
> > This udeb provides partman with editing operations for creation
> > of new partitions, deletion of partitions and initialisation of the
> > partition table.
> >
> > Package: partman-reiserfs
> > Status: install ok installed
> > Priority: standard
> > Section: debian-installer
> > Installed-Size: 236
> > Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
> > Version: 33
> > Depends: cdebconf-udeb, mkreiserfs-udeb, reiserfs-modules,
> > partman-basicfilesystems, di-utils (>= 1.14)
> > Provides: partman-filesystem
> > Description: Add to partman support for reiserfs
> >
> > Package: partman-target
> > Status: install ok installed
> > Priority: standard
> > Section: debian-installer
> > Installed-Size: 304
> > Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
> > Version: 46
> > Depends: cdebconf-udeb, partman-basicfilesystems, partman-basicmethods,
> > di-utils-mapdevfs
> > Description: Provides partman with ability to prepare /target
> > This udeb allows the user to choose how partitions should be used.
> >
> > Package: partman-xfs
> > Status: install ok installed
> > Priority: standard
> > Section: debian-installer
> > Installed-Size: 224
> > Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
> > Version: 31
> > Depends: cdebconf-udeb, xfsprogs-udeb, xfs-modules,
> > partman-basicfilesystems, di-utils (>= 1.14)
> > Provides: partman-filesystem
> > Description: Add to partman support for xfs
> >
> > Package: pcmcia-cs-udeb
> > Status: install ok installed
> > Priority: extra
> > Section: debian-installer
> > Installed-Size: 232
> > Maintainer: Per Olofsson <pelle@debian.org>
> > Version: 3.2.8-9
> > Description: PCMCIA Card Services for Linux (udeb)
> >
> > Package: pkgsel
> > Status: install ok installed
> > Priority: standard
> > Section: debian-installer
> > Installed-Size: 28
> > Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
> > Version: 0.10
> > Depends: cdebconf-udeb, apt-setup-udeb, di-utils (>= 1.20)
> > Description: Select and install packages
> > Installer-Menu-Item: 70
> >
> > Package: reiserfs-modules-2.6.18-3-486-di
> > Status: install ok installed
> > Priority: standard
> > Section: debian-installer
> > Installed-Size: 268
> > Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
> > Version: 1.40
> > Depends: kernel-image-2.6.18-3-486-di
> > Provides: reiserfs-modules
> > Description: Reiser filesystem support
> > This package contains the Reiser filesystem module for the Linux
> > kernel.
> >
> > Package: scsi-extra-modules-2.6.18-3-486-di
> > Status: install ok installed
> > Priority: standard
> > Section: debian-installer
> > Installed-Size: 1388
> > Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
> > Version: 1.40
> > Depends: scsi-modules-2.6.18-3-486-di, scsi-core-modules-2.6.18-3-486-di
> > Provides: scsi-extra-modules
> > Description: Uncommon SCSI drivers
> > This package contains uncommon SCSI drivers for the Linux kernel.
> > This includes SCSI RAID drivers, and some of the less common SCSI
> > controllers.
> >
> > Package: tzsetup-udeb
> > Status: install ok installed
> > Priority: standard
> > Section: debian-installer
> > Installed-Size: 300
> > Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
> > Version: 1:0.14
> > Depends: cdebconf-udeb, localechooser
> > Description: choose timezone
> > Installer-Menu-Item: 62
> >
> > Package: user-setup-udeb
> > Status: install ok installed
> > Priority: standard
> > Section: debian-installer
> > Installed-Size: 348
> > Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
> > Version: 1.8
> > Depends: cdebconf-udeb
> > Description: Set up users and passwords
> > Installer-Menu-Item: 63
> >
> > Package: wireless-tools-udeb
> > Status: install ok installed
> > Priority: extra
> > Section: debian-installer
> > Installed-Size: 28
> > Maintainer: Guus Sliepen <guus@debian.org>
> > Version: 28-1
> > Depends: libc6 (>= 2.3.5-1), libiw28-udeb (>= 28)
> > Description: Tools for manipulating Linux Wireless Extensions
> > This package contains the Wireless tools, used to manipulate the Linux
> > Wireless Extensions. The Wireless Extension is an interface allowing
> > you to
> > set Wireless LAN specific parameters and get the specific stats.
> > .
> > This is a udeb of the wireless tools.
> >
> > Package: xfs-modules-2.6.18-3-486-di
> > Status: install ok installed
> > Priority: standard
> > Section: debian-installer
> > Installed-Size: 552
> > Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
> > Version: 1.40
> > Depends: kernel-image-2.6.18-3-486-di
> > Provides: xfs-modules
> > Description: XFS filesystem support
> > This package contains the XFS filesystem module for the Linux kernel.
> >
> > Package: xfsprogs-udeb
> > Status: install ok installed
> > Priority: optional
> > Section: debian-installer
> > Installed-Size: 240
> > Maintainer: Nathan Scott <nathans@debian.org>
> > Version: 2.8.18-1
> > Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
> > Description: A stripped-down version of xfsprogs, for debian-installer
> > This package is an xfsprogs package built for reduced size, so that it
> > can help to save space in debian-installer.
> > .
> > Don't attempt to install this package, it has no support for a couple
> > of
> > features you surely want. Anyway, it should fail to install.
> >
> > Package: ntfs-modules-2.6.18-3-486-di
> > Status: install ok installed
> > Priority: extra
> > Section: debian-installer
> > Installed-Size: 248
> > Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
> > Version: 1.40
> > Depends: kernel-image-2.6.18-3-486-di
> > Provides: ntfs-modules
> > Description: NTFS filesystem support
> > This package contains the NTFS file system module for the Linux kernel.
> >
> > Package: qnx4-modules-2.6.18-3-486-di
> > Status: install ok installed
> > Priority: extra
> > Section: debian-installer
> > Installed-Size: 48
> > Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
> > Version: 1.40
> > Depends: kernel-image-2.6.18-3-486-di
> > Provides: qnx4-modules
> > Description: QNX4 filesystem support
> > This package contains the QNX4 filesystem module for the Linux kernel.
> >
> >
> > -- System Information:
> > Debian Release: 4.0
> > APT prefers stable
> > APT policy: (500, 'stable')
> > Architecture: i386 (i686)
> > Shell: /bin/sh linked to /bin/bash
> > Kernel: Linux 2.6.18-4-686
> > Locale: LANG=pt_PT.UTF-8, LC_CTYPE=pt_PT.UTF-8 (charmap=UTF-8)
> >
> > installation-report depends on no packages.
> >
> > Versions of packages installation-report recommends:
> > ii pciutils 1:2.2.4~pre4-1 Linux PCI Utilities
> > ii reportbug 3.31 reports bugs in the Debian
> > distrib
> >
> > -- no debconf information
> >
> >
> >
Reply to: