Bug#516150: more information
Hi there,
2009/7/26 Moritz Muehlenhoff <jmm@inutil.org>:
> On Thu, Feb 19, 2009 at 05:47:55PM +0100, Bastian Blank wrote:
>> Please provide more information:
>> - uname -a
>> - the complete kernel log (dmesg)
>> - cat /sys/devices/system/clocksource/clocksource0/*
>
> Dimitri, can you provide the mentioned information?
Sorry, I missed one of the February messages... it must have gone into
the spam trap. I sent the output of 'uname -a' here:
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=515978#62
The system from which the information below was taken now appears to
be working fine, as per my message
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=515978#57
More info, in case it helps:
-
tornado:~$ >>> date
Sun Jul 26 22:01:29 BST 2009
-
tornado:~$ >>> uname -a
Linux tornado 2.6.26-2-amd64 #1 SMP Fri Mar 27 04:02:59 UTC 2009 x86_64 GNU/Linux
-
Output of dmesg is attached.
-
tornado:~$ >>> cat /sys/devices/system/clocksource/clocksource0/*
jiffies tsc
tsc
Please let me know if you need any other information. I'll
keep a closer eye on the spam traps for a few days. :)
--
73,
Ged.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.26-2-amd64 (Debian 2.6.26-15) (dannf@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Fri Mar 27 04:02:59 UTC 2009
[ 0.000000] Command line: auto BOOT_IMAGE=Debian-2.6.26-2 ro root=fe01 irqfixup rootdelay=9 clock=tsc
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000c0000000 (usable)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 00000001c0000000 (usable)
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 786432) 1 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 1048576, 1835008) 2 entries of 3200 used
[ 0.000000] max_pfn_mapped = 1835008
[ 0.000000] init_memory_mapping
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI Error (tbxfroot-0218): A valid RSDP was not found [20080321]
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] Number of nodes 2
[ 0.000000] Node 0 MemBase 0000000000000000 Limit 00000001c0000000
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 786432) 1 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 1048576, 1835008) 2 entries of 3200 used
[ 0.000000] Skipping disabled node 1
[ 0.000000] NUMA: Using 63 for the hash shift.
[ 0.000000] Using node hash shift of 63
[ 0.000000] Intel MultiProcessor Specification v1.4
[ 0.000000] MPTABLE: OEM ID: OEM00000 Product ID: PROD00000000 <6>MPTABLE: Product ID: PROD00000000 <6>MPTABLE: APIC at: 0xFEE00000
[ 0.000000] Bootmem setup node 0 0000000000000000-00000001c0000000
[ 0.000000] NODE_DATA [0000000000010000 - 0000000000014fff]
[ 0.000000] bootmap [0000000000015000 - 000000000004cfff] pages 38
[ 0.000000] early res: 0 [0-fff] BIOS data page
[ 0.000000] early res: 1 [6000-7fff] TRAMPOLINE
[ 0.000000] early res: 2 [200000-673397] TEXT DATA BSS
[ 0.000000] early res: 3 [3960000-40ef05e] RAMDISK
[ 0.000000] early res: 4 [9f000-fffff] BIOS reserved
[ 0.000000] early res: 5 [8000-ffff] PGTABLE
[ 0.000000] [ffffe20000000000-ffffe200025fffff] PMD -> [ffff810001200000-ffff8100037fffff] on node 0
[ 0.000000] [ffffe20002600000-ffffe200061fffff] PMD -> [ffff810004200000-ffff810006ffffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] DMA32 4096 -> 1048576
[ 0.000000] Normal 1048576 -> 1835008
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0 -> 159
[ 0.000000] 0: 256 -> 786432
[ 0.000000] 0: 1048576 -> 1835008
[ 0.000000] On node 0 totalpages: 1572767
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 1249 pages reserved
[ 0.000000] DMA zone: 2694 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 768056 pages, LIFO batch:31
[ 0.000000] Normal zone: 10752 pages used for memmap
[ 0.000000] Normal zone: 775680 pages, LIFO batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] Intel MultiProcessor Specification v1.4
[ 0.000000] MPTABLE: OEM ID: OEM00000 Product ID: PROD00000000 <6>MPTABLE: Product ID: PROD00000000 <6>MPTABLE: APIC at: 0xFEE00000
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] Processor #1
[ 0.000000] I/O APIC #4 Version 17 at 0xFEC00000.
[ 0.000000] Setting APIC routing to flat
[ 0.000000] Processors: 2
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at c2000000 (gap: c0000000:20000000)
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PERCPU: Allocating 37168 bytes of per cpu data
[ 0.000000] NR_CPUS: 32, nr_cpu_ids: 2
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1546430
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: auto BOOT_IMAGE=Debian-2.6.26-2 ro root=fe01 irqfixup rootdelay=9 clock=tsc
[ 0.000000] Misrouted IRQ fixup support enabled.
[ 0.000000] This may impact system performance.
[ 0.000000] Warning! clock= boot option is deprecated. Use clocksource=xyz
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] TSC calibrated against PIT
[ 0.000000] Marking TSC unstable due to TSCs unsynchronized
[ 0.000000] time.c: Detected 1608.248 MHz processor.
[ 0.004000] spurious 8259A interrupt: IRQ7.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Checking aperture...
[ 0.004000] Node 0: aperture @ 8000000 size 32 MB
[ 0.004000] Aperture pointing to e820 RAM. Ignoring.
[ 0.004000] No AGP bridge found
[ 0.004000] Your BIOS doesn't leave a aperture memory hole
[ 0.004000] Please enable the IOMMU option in the BIOS setup
[ 0.004000] This costs you 64 MB of RAM
[ 0.004000] Mapping aperture over 65536 KB of RAM @ 8000000
[ 0.004000] PM: Registered nosave memory: 0000000008000000 - 000000000c000000
[ 0.004000] Memory: 6126768k/7340032k available (2224k kernel code, 164300k reserved, 1081k data, 392k init)
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.084127] Calibrating delay using timer specific routine.. 3218.80 BogoMIPS (lpj=6437618)
[ 0.084269] Security Framework initialized
[ 0.084319] SELinux: Disabled at boot.
[ 0.084362] Capability LSM initialized
[ 0.085296] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.093111] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.096970] Mount-cache hash table entries: 256
[ 0.097223] Initializing cgroup subsys ns
[ 0.097264] Initializing cgroup subsys cpuacct
[ 0.097304] Initializing cgroup subsys devices
[ 0.097371] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.097414] CPU: L2 Cache: 1024K (64 bytes/line)
[ 0.097454] CPU 0/0 -> Node 0
[ 0.098515] ACPI: Core revision 20080321
[ 0.098610] ACPI Exception (tbxface-0629): AE_NO_ACPI_TABLES, While loading namespace from ACPI tables [20080321]
[ 0.098714] ACPI: Unable to load the System Description Tables
[ 0.098882] ExtINT not setup in hardware but reported by MP table
[ 0.104006] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[ 0.144009] CPU0: AMD Opteron(tm) Processor 242 stepping 0a
[ 0.144009] Using local APIC timer interrupts.
[ 0.148009] APIC timer calibration result 12564433
[ 0.148009] Detected 12.564 MHz APIC timer.
[ 0.148009] Booting processor 1/1 ip 6000
[ 0.156009] Initializing CPU#1
[ 0.156009] Calibrating delay using timer specific routine.. 3216.53 BogoMIPS (lpj=6433075)
[ 0.156009] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.156009] CPU: L2 Cache: 1024K (64 bytes/line)
[ 0.156009] CPU 1/1 -> Node 0
[ 0.235971] CPU1: AMD Opteron(tm) Processor 242 stepping 0a
[ 0.236014] Brought up 2 CPUs
[ 0.236014] Total of 2 processors activated (6435.34 BogoMIPS).
[ 0.236014] CPU0 attaching sched-domain:
[ 0.236014] domain 0: span 0-1
[ 0.236014] groups: 0 1
[ 0.236014] domain 1: span 0-1
[ 0.236014] groups: 0-1
[ 0.236014] CPU1 attaching sched-domain:
[ 0.236014] domain 0: span 0-1
[ 0.236014] groups: 1 0
[ 0.236014] domain 1: span 0-1
[ 0.236014] groups: 0-1
[ 0.236014] net_namespace: 1224 bytes
[ 0.236014] Booting paravirtualized kernel on bare hardware
[ 0.236014] NET: Registered protocol family 16
[ 0.236014] node 0 link 2: io port [7000, ffff]
[ 0.236014] TOM: 00000000c0000000 aka 3072M
[ 0.236014] node 0 link 2: mmio [a0000, bffff]
[ 0.236014] node 0 link 2: mmio [feb00000, fec0ffff]
[ 0.236014] node 0 link 2: mmio [c0000000, febfffff]
[ 0.236014] node 0 link 2: mmio [e0000000, e04fffff]
[ 0.236014] TOM2: 00000001c0000000 aka 7168M
[ 0.236014] bus: [00,04] on node 0 link 2
[ 0.236014] bus: 00 index 0 io port: [0, ffff]
[ 0.236014] bus: 00 index 1 mmio: [a0000, bffff]
[ 0.236014] bus: 00 index 2 mmio: [c0000000, ffffffff]
[ 0.236014] bus: 00 index 3 mmio: [1c0000000, fcffffffff]
[ 0.236014] PCI: Using configuration type 1 for base access
[ 0.236014] ACPI: Interpreter disabled.
[ 0.236014] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.236014] pnp: PnP ACPI: disabled
[ 0.236014] usbcore: registered new interface driver usbfs
[ 0.240015] usbcore: registered new interface driver hub
[ 0.240015] usbcore: registered new device driver usb
[ 0.240015] PCI: Probing PCI hardware
[ 0.240015] PCI: Probing PCI hardware (bus 00)
[ 0.240015] PCI: Transparent bridge - 0000:00:09.0
[ 0.240015] PCI->APIC IRQ transform: 0000:00:01.1[A] -> IRQ 3
[ 0.240015] PCI->APIC IRQ transform: 0000:00:02.0[A] -> IRQ 5
[ 0.240015] PCI->APIC IRQ transform: 0000:00:02.1[B] -> IRQ 10
[ 0.240015] PCI->APIC IRQ transform: 0000:00:04.0[A] -> IRQ 3
[ 0.240015] PCI->APIC IRQ transform: 0000:00:07.0[A] -> IRQ 11
[ 0.240015] PCI->APIC IRQ transform: 0000:00:08.0[A] -> IRQ 10
[ 0.240015] PCI->APIC IRQ transform: 0000:00:0a.0[A] -> IRQ 9
[ 0.240015] PCI->APIC IRQ transform: 0000:01:06.0[A] -> IRQ 5
[ 0.240015] PCI->APIC IRQ transform: 0000:01:07.0[A] -> IRQ 11
[ 0.240015] PCI->APIC IRQ transform: 0000:04:00.0[A] -> IRQ 5
[ 0.260016] PCI-DMA: Disabling AGP.
[ 0.260016] PCI-DMA: aperture base @ 8000000 size 65536 KB
[ 0.260016] PCI-DMA: using GART IOMMU.
[ 0.260016] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.260016] pnp: the driver 'system' has been registered
[ 0.260016] PCI: Bridge: 0000:00:09.0
[ 0.260016] IO window: a000-afff
[ 0.260016] MEM window: 0xfe900000-0xfe9fffff
[ 0.260016] PREFETCH window: 0x00000000fea00000-0x00000000feafffff
[ 0.260016] PCI: Bridge: 0000:00:0c.0
[ 0.260016] IO window: 9000-9fff
[ 0.260016] MEM window: 0xfe800000-0xfe8fffff
[ 0.260016] PREFETCH window: 0x00000000fe700000-0x00000000fe7fffff
[ 0.260016] PCI: Bridge: 0000:00:0d.0
[ 0.260016] IO window: 8000-8fff
[ 0.260016] MEM window: 0xfe600000-0xfe6fffff
[ 0.260016] PREFETCH window: 0x00000000fe500000-0x00000000fe5fffff
[ 0.260016] PCI: Bridge: 0000:00:0e.0
[ 0.260016] IO window: 7000-7fff
[ 0.260016] MEM window: 0xfb000000-0xfdffffff
[ 0.260016] PREFETCH window: 0x00000000d0000000-0x00000000dfffffff
[ 0.260016] PCI: Setting latency timer of device 0000:00:09.0 to 64
[ 0.260016] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[ 0.260016] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[ 0.260037] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[ 0.260080] NET: Registered protocol family 2
[ 0.308957] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.312536] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.320294] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.321262] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.321306] TCP reno registered
[ 0.332716] NET: Registered protocol family 1
[ 0.332927] checking if image is initramfs... it is
[ 1.047631] Freeing initrd memory: 7740k freed
[ 1.057241] platform rtc_cmos: registered platform RTC device (no PNP device found)
[ 1.058309] audit: initializing netlink socket (disabled)
[ 1.058309] type=2000 audit(1242376391.048:1): initialized
[ 1.058309] Total HugeTLB memory allocated, 0
[ 1.058309] VFS: Disk quotas dquot_6.5.1
[ 1.058309] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.058309] msgmni has been set to 11981
[ 1.058309] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.058309] io scheduler noop registered
[ 1.058309] io scheduler anticipatory registered
[ 1.058309] io scheduler deadline registered
[ 1.058309] io scheduler cfq registered (default)
[ 1.058309] pci 0000:00:00.0: Enabling HT MSI Mapping
[ 1.082384] pci 0000:00:0c.0: Enabling HT MSI Mapping
[ 1.082435] pci 0000:00:0c.0: Found enabled HT MSI Mapping
[ 1.082487] pci 0000:00:0d.0: Enabling HT MSI Mapping
[ 1.082537] pci 0000:00:0d.0: Found enabled HT MSI Mapping
[ 1.082588] pci 0000:00:0e.0: Enabling HT MSI Mapping
[ 1.082637] pci 0000:00:0e.0: Found enabled HT MSI Mapping
[ 1.082710] pci 0000:04:00.0: Boot video device
[ 1.083344] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[ 1.083366] assign_interrupt_mode Found MSI capability
[ 1.083434] Allocate Port Service[0000:00:0c.0:pcie00]
[ 1.084014] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[ 1.084034] assign_interrupt_mode Found MSI capability
[ 1.084094] Allocate Port Service[0000:00:0d.0:pcie00]
[ 1.084666] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[ 1.084685] assign_interrupt_mode Found MSI capability
[ 1.084745] Allocate Port Service[0000:00:0e.0:pcie00]
[ 1.087240] Linux agpgart interface v0.103
[ 1.087284] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 1.087477] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.087795] pnp: the driver 'serial' has been registered
[ 1.089715] brd: module loaded
[ 1.089867] input: Macintosh mouse button emulation as /class/input/input0
[ 1.090030] pnp: the driver 'i8042 kbd' has been registered
[ 1.090308] pnp: the driver 'i8042 aux' has been registered
[ 1.090308] pnp: the driver 'i8042 kbd' has been unregistered
[ 1.090308] pnp: the driver 'i8042 aux' has been unregistered
[ 1.090308] PNP: No PS/2 controller found. Probing ports directly.
[ 1.092860] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.092908] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.113130] mice: PS/2 mouse device common for all mice
[ 1.113720] pnp: the driver 'rtc_cmos' has been registered
[ 1.114307] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[ 1.114307] rtc0: alarms up to one day
[ 1.140857] input: AT Translated Set 2 keyboard as /class/input/input1
[ 1.157974] cpuidle: using governor ladder
[ 1.158019] cpuidle: using governor menu
[ 1.158066] No iBFT detected.
[ 1.158594] TCP cubic registered
[ 1.158636] NET: Registered protocol family 17
[ 1.160332] registered taskstats version 1
[ 1.160626] rtc_cmos rtc_cmos: setting system clock to 2009-05-15 08:33:11 UTC (1242376391)
[ 1.160697] Freeing unused kernel memory: 392k freed
[ 1.344525] thermal: Unknown symbol acpi_processor_set_thermal_limit
[ 1.585739] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.585804] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 1.585809] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 1.586051] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
[ 1.586146] ohci_hcd 0000:00:02.0: irq 5, io mem 0xfebff000
[ 1.625336] Uniform Multi-Platform E-IDE driver
[ 1.625336] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 1.642037] usb usb1: configuration #1 chosen from 1 choice
[ 1.642137] hub 1-0:1.0: USB hub found
[ 1.642196] hub 1-0:1.0: 10 ports detected
[ 1.745466] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.745521] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.745580] usb usb1: Product: OHCI Host Controller
[ 1.745625] usb usb1: Manufacturer: Linux 2.6.26-2-amd64 ohci_hcd
[ 1.745671] usb usb1: SerialNumber: 0000:00:02.0
[ 1.745580] PCI: Setting latency timer of device 0000:00:02.1 to 64
[ 1.745588] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 1.745728] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
[ 1.745849] ehci_hcd 0000:00:02.1: debug port 1
[ 1.745891] PCI: cache line size of 64 is not supported by device 0000:00:02.1
[ 1.745905] ehci_hcd 0000:00:02.1: irq 10, io mem 0xfeb00000
[ 1.756469] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 1.756635] usb usb2: configuration #1 chosen from 1 choice
[ 1.756717] hub 2-0:1.0: USB hub found
[ 1.756820] hub 2-0:1.0: 10 ports detected
[ 1.859682] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.859728] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.859785] usb usb2: Product: EHCI Host Controller
[ 1.859826] usb usb2: Manufacturer: Linux 2.6.26-2-amd64 ehci_hcd
[ 1.859868] usb usb2: SerialNumber: 0000:00:02.1
[ 1.862550] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
[ 1.862550] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[ 2.383452] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:16:17:36:3e:c5
[ 2.383512] forcedeth 0000:00:0a.0: highdma csum timirq gbit lnktim desc-v3
[ 2.388186] tg3.c:v3.92.1 (June 9, 2008)
[ 2.394716] usb 1-1: new low speed USB device using ohci_hcd and address 2
[ 2.397520] SCSI subsystem initialized
[ 2.473518] eth1: Tigon3 [partno(BCM95788A50) rev 3003 PHY(5705)] (PCI:33MHz:32-bit) 10/100/1000Base-T Ethernet 00:16:17:36:3e:c4
[ 2.473518] eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[1]
[ 2.473518] eth1: dma_rwctrl[763f0000] dma_mask[32-bit]
[ 2.528766] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[11] MMIO=[fe9ff000-fe9ff7ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 2.537217] NFORCE-CK804: 0000:00:06.0 (rev a2) UDMA133 controller
[ 2.537217] NFORCE-CK804: IDE controller (0x10de:0x0053 rev 0xa2) at PCI slot 0000:00:06.0
[ 2.537217] NFORCE-CK804: not 100% native mode: will probe irqs later
[ 2.537274] ide0: BM-DMA at 0xe000-0xe007
[ 2.537274] ide1: BM-DMA at 0xe008-0xe00f
[ 2.537274] Probing IDE interface ide0...
[ 2.546237] libata version 3.00 loaded.
[ 2.555041] udev: renamed network interface eth1 to eth2
[ 2.557840] udev: renamed network interface eth0_rename to eth1
[ 2.626860] usb 1-1: configuration #1 chosen from 1 choice
[ 2.629914] usb 1-1: New USB device found, idVendor=046d, idProduct=c408
[ 2.629965] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.630014] usb 1-1: Product: USB Trackball
[ 2.630059] usb 1-1: Manufacturer: Logitech
[ 2.657287] usbcore: registered new interface driver hiddev
[ 2.665193] input: Logitech USB Trackball as /class/input/input2
[ 2.694458] input,hidraw0: USB HID v1.10 Mouse [Logitech USB Trackball] on usb-0000:00:02.0-1
[ 2.694643] usbcore: registered new interface driver usbhid
[ 2.694688] usbhid: v2.6:USB HID core driver
[ 2.825497] hda: WDC WD3200SB-01KMA0, ATA DISK drive
[ 3.497479] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 3.497551] hda: UDMA/100 mode selected
[ 3.497653] Probing IDE interface ide1...
[ 3.808520] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0010dc0000f44282]
[ 3.898553] hdc: SAMSUNG CDRW/DVD SM-352F, ATAPI CD/DVD-ROM drive
[ 4.178197] hdd: ST3500630A, ATA DISK drive
[ 4.234079] hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 4.234173] hdc: UDMA/33 mode selected
[ 4.234349] hdd: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 4.234507] hdd: UDMA/100 mode selected
[ 4.234794] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 4.234906] ide1 at 0x170-0x177,0x376 on irq 15
[ 4.235200] sata_nv 0000:00:07.0: version 3.5
[ 4.235295] PCI: Setting latency timer of device 0000:00:07.0 to 64
[ 4.236320] scsi0 : sata_nv
[ 4.236972] scsi1 : sata_nv
[ 4.237058] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xcc00 irq 11
[ 4.237105] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xcc08 irq 11
[ 4.709463] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.718174] ata1.00: ATA-7: ST3_INVALID_PFM, SD04, max UDMA/133
[ 4.718221] ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 4.734258] ata1.00: configured for UDMA/133
[ 5.209171] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 5.218282] ata2.00: ATA-7: Maxtor 6L300S0, BANC1G10, max UDMA/133
[ 5.218330] ata2.00: 586114704 sectors, multi 0: LBA48 NCQ (not used)
[ 5.234551] ata2.00: configured for UDMA/133
[ 5.234742] scsi 0:0:0:0: Direct-Access ATA ST3_INVALID_PFM SD04 PQ: 0 ANSI: 5
[ 5.234980] scsi 1:0:0:0: Direct-Access ATA Maxtor 6L300S0 BANC PQ: 0 ANSI: 5
[ 5.235214] PCI: Setting latency timer of device 0000:00:08.0 to 64
[ 5.235259] scsi2 : sata_nv
[ 5.235366] scsi3 : sata_nv
[ 5.235444] ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xb800 irq 10
[ 5.235494] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xb808 irq 10
[ 5.553382] ata3: SATA link down (SStatus 0 SControl 300)
[ 5.873375] ata4: SATA link down (SStatus 0 SControl 300)
[ 5.925237] Driver 'sd' needs updating - please use bus_type methods
[ 5.925474] sd 0:0:0:0: [sda] 1465149168 512-byte hardware sectors (750156 MB)
[ 5.925474] sd 0:0:0:0: [sda] Write Protect is off
[ 5.925474] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.925474] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.925474] sd 0:0:0:0: [sda] 1465149168 512-byte hardware sectors (750156 MB)
[ 5.925474] sd 0:0:0:0: [sda] Write Protect is off
[ 5.925474] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.925474] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.925474] sda:<6>hdc: ATAPI 52X DVD-ROM CD-R/RW drive, 2048kB Cache
[ 5.929152] Uniform CD-ROM driver Revision: 3.20
[ 5.929152] hda: max request size: 512KiB
[ 5.933153] hda: 625142448 sectors (320072 MB) w/8192KiB Cache, CHS=38913/255/63
[ 5.933153] hda: cache flushes supported
[ 5.933153] hda: hda1 hda2 < sda1
[ 5.943127] sd 0:0:0:0: [sda] Attached SCSI disk
[ 5.943298] sd 1:0:0:0: [sdb] 586114704 512-byte hardware sectors (300091 MB)
[ 5.943366] sd 1:0:0:0: [sdb] Write Protect is off
[ 5.943410] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 5.943440] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.943566] sd 1:0:0:0: [sdb] 586114704 512-byte hardware sectors (300091 MB)
[ 5.943625] sd 1:0:0:0: [sdb] Write Protect is off
[ 5.943668] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 5.943695] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.943755] sdb: hda5 >
[ 5.958878] hdd: max request size: 512KiB
[ 5.962551] sdb1
[ 5.962723] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 6.005577] hdd: 976773168 sectors (500107 MB) w/16384KiB Cache, CHS=60801/255/63
[ 6.046883] hdd: cache flushes supported
[ 6.047031] hdd: hdd1
[ 6.571036] hdd: dma_intr: status=0x51 { DriveReady SeekComplete Error }
[ 6.571191] hdd: dma_intr: error=0x84 { DriveStatusError BadCRC }
[ 6.571357] ide: failed opcode was: unknown
[ 7.012490] hdd: dma_intr: status=0x51 { DriveReady SeekComplete Error }
[ 7.012634] hdd: dma_intr: error=0x84 { DriveStatusError BadCRC }
[ 7.012802] ide: failed opcode was: unknown
[ 7.453949] hdd: dma_intr: status=0x51 { DriveReady SeekComplete Error }
[ 7.454097] hdd: dma_intr: error=0x84 { DriveStatusError BadCRC }
[ 7.454263] ide: failed opcode was: unknown
[ 7.895411] hdd: dma_intr: status=0x51 { DriveReady SeekComplete Error }
[ 7.895557] hdd: dma_intr: error=0x84 { DriveStatusError BadCRC }
[ 7.895723] ide: failed opcode was: unknown
[ 7.895790] hdc: DMA disabled
[ 7.895835] hdd: UDMA/66 mode selected
[ 7.942891] ide1: reset: success
[ 8.386906] hdd: dma_intr: status=0x51 { DriveReady SeekComplete Error }
[ 8.387049] hdd: dma_intr: error=0x84 { DriveStatusError BadCRC }
[ 8.387214] ide: failed opcode was: unknown
[ 8.828345] hdd: dma_intr: status=0x51 { DriveReady SeekComplete Error }
[ 8.828488] hdd: dma_intr: error=0x84 { DriveStatusError BadCRC }
[ 8.828656] ide: failed opcode was: unknown
[ 9.269822] hdd: dma_intr: status=0x51 { DriveReady SeekComplete Error }
[ 9.269966] hdd: dma_intr: error=0x84 { DriveStatusError BadCRC }
[ 9.270131] ide: failed opcode was: unknown
[ 9.711268] hdd: dma_intr: status=0x51 { DriveReady SeekComplete Error }
[ 9.711410] hdd: dma_intr: error=0x84 { DriveStatusError BadCRC }
[ 9.711575] ide: failed opcode was: unknown
[ 9.711642] hdd: UDMA/44 mode selected
[ 9.758864] ide1: reset: success
[ 18.946109] device-mapper: uevent: version 1.0.3
[ 18.950109] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
[ 33.218775] PM: Starting manual resume from disk
[ 33.243294] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 33.243294] EXT3-fs: write access will be enabled during recovery.
[ 33.355291] kjournald starting. Commit interval 5 seconds
[ 33.358961] EXT3-fs: recovery complete.
[ 33.384033] EXT3-fs: mounted filesystem with ordered data mode.
[ 35.392376] udevd version 125 started
[ 36.261290] i2c-adapter i2c-0: nForce2 SMBus adapter at 0xf800
[ 36.261373] i2c-adapter i2c-1: nForce2 SMBus adapter at 0xf400
[ 36.723937] input: PC Speaker as /class/input/input3
[ 36.995834] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 37.315835] intel8x0_measure_ac97_clock: measured 54623 usecs
[ 37.315882] intel8x0: clocking to 46960
[ 40.171224] EXT3 FS on dm-1, internal journal
[ 40.807788] loop: module loaded
[ 41.039850] w83627hf: Found W83627THF chip at 0x290
[ 89.160388] kjournald starting. Commit interval 5 seconds
[ 89.163252] EXT3 FS on hda1, internal journal
[ 89.163332] EXT3-fs: mounted filesystem with ordered data mode.
[ 89.196730] kjournald starting. Commit interval 5 seconds
[ 89.198559] EXT3 FS on hdd1, internal journal
[ 89.198633] EXT3-fs: mounted filesystem with ordered data mode.
[ 89.242763] kjournald starting. Commit interval 5 seconds
[ 89.246131] EXT3 FS on sda1, internal journal
[ 89.246203] EXT3-fs: mounted filesystem with ordered data mode.
[ 89.297053] Adding 6180856k swap on /dev/mapper/tornado-swap_1. Priority:-1 extents:1 across:6180856k
[ 91.325361] NET: Registered protocol family 10
[ 91.326101] lo: Disabled Privacy Extensions
[ 95.881468] tun: Universal TUN/TAP device driver, 1.6
[ 95.881468] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 95.886614] tun0: Disabled Privacy Extensions
[ 96.081094] tun1: Disabled Privacy Extensions
[ 96.266906] tun2: Disabled Privacy Extensions
[ 99.609618] pnp: the driver 'parport_pc' has been registered
[ 99.609786] parport0: PC-style at 0x378 [PCSPP,TRISTATE]
[ 99.615061] parport0: Device ID was 64 bytes while device told it would be 63 bytes
[ 99.615075] parport0 (addr 0): SCSI adapter, IMG VP1
[ 99.663215] lp0: using parport0 (polling).
[ 99.698358] ppdev: user-space parallel port driver
[ 101.634323] eth1: no IPv6 routers present
[ 103.279701] RPC: Registered udp transport module.
[ 103.279757] RPC: Registered tcp transport module.
[ 103.351778] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 103.423102] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 103.433494] NFSD: starting 90-second grace period
[ 109.090171] warning: `ntpd' uses 32-bit capabilities (legacy support in use)
[699512.604024] usb 2-9: new high speed USB device using ehci_hcd and address 3
[699512.737208] usb 2-9: configuration #1 chosen from 1 choice
[699512.738185] usb 2-9: New USB device found, idVendor=04b4, idProduct=6830
[699512.738197] usb 2-9: New USB device strings: Mfr=56, Product=78, SerialNumber=100
[699512.738206] usb 2-9: Product: USB2.0 Storage Device
[699512.738701] usb 2-9: Manufacturer: Cypress Semiconductor
[699512.738708] usb 2-9: SerialNumber: 005F07A83654
[699513.003689] Initializing USB Mass Storage driver...
[699513.007869] scsi4 : SCSI emulation for USB Mass Storage devices
[699513.008604] usb-storage: device found at 3
[699513.008612] usb-storage: waiting for device to settle before scanning
[699513.007869] usbcore: registered new interface driver usb-storage
[699513.007869] USB Mass Storage support registered.
[699518.004975] usb-storage: device scan complete
[699518.007173] scsi 4:0:0:0: Direct-Access FUJITSU MPC3084AT PQ: 0 ANSI: 0
[699518.010685] sd 4:0:0:0: [sdc] 16514064 512-byte hardware sectors (8455 MB)
[699518.013801] sd 4:0:0:0: [sdc] Write Protect is off
[699518.013812] sd 4:0:0:0: [sdc] Mode Sense: 33 00 00 00
[699518.013817] sd 4:0:0:0: [sdc] Assuming drive cache: write through
[699518.034617] sd 4:0:0:0: [sdc] 16514064 512-byte hardware sectors (8455 MB)
[699518.039100] sd 4:0:0:0: [sdc] Write Protect is off
[699518.039110] sd 4:0:0:0: [sdc] Mode Sense: 33 00 00 00
[699518.039114] sd 4:0:0:0: [sdc] Assuming drive cache: write through
[699518.039122] sdc: sdc1 sdc2 sdc3
[699518.057841] sd 4:0:0:0: [sdc] Attached SCSI disk
[699524.196325] EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
[699534.027345] EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
[703929.445010] EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
[703934.439233] EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
[712631.267963] usb 2-9: USB disconnect, address 3
[712649.208057] usb 2-9: new high speed USB device using ehci_hcd and address 4
[712649.341014] usb 2-9: configuration #1 chosen from 1 choice
[712649.358437] scsi5 : SCSI emulation for USB Mass Storage devices
[712649.358752] usb 2-9: New USB device found, idVendor=04b4, idProduct=6830
[712649.358752] usb 2-9: New USB device strings: Mfr=56, Product=78, SerialNumber=100
[712649.358752] usb 2-9: Product: USB2.0 Storage Device
[712649.358752] usb 2-9: Manufacturer: Cypress Semiconductor
[712649.358752] usb 2-9: SerialNumber: 005F07A83654
[712649.360419] usb-storage: device found at 4
[712649.360427] usb-storage: waiting for device to settle before scanning
[712654.359791] usb-storage: device scan complete
[712654.361865] scsi 5:0:0:0: Direct-Access FUJITSU MPA3035ATU PQ: 0 ANSI: 0
[712654.364068] sd 5:0:0:0: [sdc] 6835952 512-byte hardware sectors (3500 MB)
[712654.376425] sd 5:0:0:0: [sdc] Write Protect is off
[712654.376457] sd 5:0:0:0: [sdc] Mode Sense: 33 00 00 00
[712654.376462] sd 5:0:0:0: [sdc] Assuming drive cache: write through
[712654.379687] sd 5:0:0:0: [sdc] 6835952 512-byte hardware sectors (3500 MB)
[712654.383581] sd 5:0:0:0: [sdc] Write Protect is off
[712654.383604] sd 5:0:0:0: [sdc] Mode Sense: 33 00 00 00
[712654.383607] sd 5:0:0:0: [sdc] Assuming drive cache: write through
[712654.383634] sdc: sdc1 sdc2 sdc4
[712654.389346] sd 5:0:0:0: [sdc] Attached SCSI disk
[712655.335935] kjournald starting. Commit interval 5 seconds
[712655.338206] EXT3 FS on sdc1, internal journal
[712655.338206] EXT3-fs: mounted filesystem with ordered data mode.
[712660.515525] kjournald starting. Commit interval 5 seconds
[712660.518795] EXT3 FS on sdc2, internal journal
[712660.518821] EXT3-fs: mounted filesystem with ordered data mode.
[712670.507963] kjournald starting. Commit interval 5 seconds
[712670.510039] EXT3 FS on sdc4, internal journal
[712670.510066] EXT3-fs: mounted filesystem with ordered data mode.
[721754.192701] usb 2-9: USB disconnect, address 4
[2844740.905485] hda: dma_timer_expiry: dma status == 0x64
[2844750.905666] hda: DMA interrupt recovery
[2844750.905679] hda: lost interrupt
Reply to: