--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-2.6.29-2-686: Zstar vimicro webcam (0ac8:303b) doesn't work with new kernel
- From: serraemeira <leonardoserra@hotmail.com>
- Date: Sun, 24 May 2009 01:28:09 -0300
- Message-id: <20090524042809.4225.61514.reportbug@squeeze>
Package: linux-image-2.6.29-2-686
Version: 2.6.29-5
Severity: important
Hello,
It's known that GSPCA module has became part of linux kernel since 2.6.27.
My webcam used to work in 2.6.26 kernel using these commands:
#rmmod zc0301
#rmmod gspca
#modprobe gspca
But with newer kernels my webcam doesn't work anymore.
# lsusb
Bus 002 Device 002: ID 0ac8:303b Z-Star Microelectronics Corp. ZC0303 WebCam
Same bug in Ubuntu: https://bugs.launchpad.net/linux/+bug/292086
Thanks a lot!
-- Package-specific info:
** Version:
Linux version 2.6.29-2-686 (Debian 2.6.29-5) (waldi@debian.org) (gcc version 4.3.3 (Debian 4.3.3-10) ) #1 SMP Sun May 17 17:56:29 UTC 2009
** Command line:
root=/dev/hda2 ro quiet
** Not tainted
** Kernel log:
[ 2.637585] sis5513 0000:00:02.5: IDE controller (0x1039:0x5513 rev 0x01)
[ 2.637608] sis5513 0000:00:02.5: not 100% native mode: will probe irqs later
[ 2.637614] ide0: BM-DMA at 0x4000-0x4007
[ 2.637623] ide1: BM-DMA at 0x4008-0x400f
[ 2.637631] Probing IDE interface ide0...
[ 2.665823] 8139too Fast Ethernet driver 0.9.28
[ 2.667767] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.691397] libata version 3.00 loaded.
[ 2.924180] hda: SAMSUNG SP0842N, ATA DISK drive
[ 3.372177] hdb: TSSTcorpCD/DVDW SH-S182F, ATAPI CD/DVD-ROM drive
[ 3.428060] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 3.441973] hda: UDMA/100 mode selected
[ 3.458650] hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 3.458990] hdb: UDMA/33 mode selected
[ 3.459430] Probing IDE interface ide1...
[ 4.028058] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 4.044645] ide1 at 0x170-0x177,0x376 on irq 15
[ 4.044825] 8139too 0000:00:08.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.045440] eth0: RealTek RTL8139 at 0xf400, 00:01:6c:14:08:5b, IRQ 16
[ 4.045443] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[ 4.045478] ohci_hcd 0000:00:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 4.045552] ohci_hcd 0000:00:03.0: setting latency timer to 64
[ 4.045555] ohci_hcd 0000:00:03.0: OHCI Host Controller
[ 4.045593] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
[ 4.045619] ohci_hcd 0000:00:03.0: irq 20, io mem 0xdffff000
[ 4.051052] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 4.102028] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.102031] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.102034] usb usb2: Product: OHCI Host Controller
[ 4.102036] usb usb2: Manufacturer: Linux 2.6.29-2-686 ohci_hcd
[ 4.102039] usb usb2: SerialNumber: 0000:00:03.0
[ 4.102115] usb usb2: configuration #1 chosen from 1 choice
[ 4.102147] hub 2-0:1.0: USB hub found
[ 4.102159] hub 2-0:1.0: 4 ports detected
[ 4.102282] sata_sis 0000:00:05.0: version 1.0
[ 4.102303] sata_sis 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 4.102309] sata_sis 0000:00:05.0: Detected SiS 1183/966/966L/968/680 controller in PATA mode
[ 4.102348] sata_sis 0000:00:05.0: setting latency timer to 64
[ 4.102650] scsi0 : sata_sis
[ 4.102833] scsi1 : sata_sis
[ 4.103301] ata1: PATA max UDMA/133 cmd 0xfd00 ctl 0xfc00 bmdma 0xf900 irq 17
[ 4.103304] ata2: PATA max UDMA/133 cmd 0xfb00 ctl 0xfa00 bmdma 0xf908 irq 17
[ 4.430956] ohci_hcd 0000:00:03.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 4.430989] ohci_hcd 0000:00:03.1: setting latency timer to 64
[ 4.430993] ohci_hcd 0000:00:03.1: OHCI Host Controller
[ 4.431030] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
[ 4.431058] ohci_hcd 0000:00:03.1: irq 21, io mem 0xdfffe000
[ 4.476022] usb 2-1: new full speed USB device using ohci_hcd and address 2
[ 4.486022] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.486025] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.486028] usb usb3: Product: OHCI Host Controller
[ 4.486031] usb usb3: Manufacturer: Linux 2.6.29-2-686 ohci_hcd
[ 4.486033] usb usb3: SerialNumber: 0000:00:03.1
[ 4.486117] usb usb3: configuration #1 chosen from 1 choice
[ 4.486149] hub 3-0:1.0: USB hub found
[ 4.486160] hub 3-0:1.0: 4 ports detected
[ 4.501601] ide-gd driver 1.18
[ 4.501640] hda: max request size: 512KiB
[ 4.503162] hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=16383/255/63
[ 4.503366] hda: cache flushes supported
[ 4.503420] hda:<6>ide-cd driver 5.00
[ 4.511021] hda1 hda2 hda3 < hda5 hda6 >
[ 4.550492] ide-cd: hdb: ATAPI 48X DVD-ROM DVD-R/RAM CD-R/RW drive, 2048kB Cache
[ 4.550502] Uniform CD-ROM driver Revision: 3.20
[ 4.689031] usb 2-1: New USB device found, idVendor=0ac8, idProduct=303b
[ 4.689036] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.689039] usb 2-1: Product: PC Camera
[ 4.689041] usb 2-1: Manufacturer: Vimicro Corp.
[ 4.689132] usb 2-1: configuration #1 chosen from 1 choice
[ 5.067653] PM: Starting manual resume from disk
[ 5.133176] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 5.133180] EXT3-fs: write access will be enabled during recovery.
[ 5.212925] kjournald starting. Commit interval 5 seconds
[ 5.212940] EXT3-fs: recovery complete.
[ 5.213166] EXT3-fs: mounted filesystem with ordered data mode.
[ 6.862549] udev: starting version 141
[ 7.134981] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 7.145050] ACPI: Power Button (FF) [PWRF]
[ 7.145164] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 7.161059] ACPI: Power Button (CM) [PWRB]
[ 7.425178] parport_pc 00:09: reported by Plug and Play ACPI
[ 7.425222] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 7.560782] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 7.677803] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 7.714563] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 7.757168] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 8.153895] Intel ICH 0000:00:02.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 8.477012] intel8x0_measure_ac97_clock: measured 54884 usecs
[ 8.477016] intel8x0: clocking to 48000
[ 8.563750] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4
[ 9.275562] Adding 1815304k swap on /dev/hda6. Priority:-1 extents:1 across:1815304k
[ 61.436907] EXT3 FS on hda2, internal journal
[ 62.317960] loop: module loaded
[ 63.431804] kjournald starting. Commit interval 5 seconds
[ 63.431953] EXT3 FS on hda5, internal journal
[ 63.431960] EXT3-fs: mounted filesystem with ordered data mode.
[ 64.057840] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[ 65.580932] NET: Registered protocol family 10
[ 65.581597] lo: Disabled Privacy Extensions
[ 76.452013] eth0: no IPv6 routers present
** Loaded modules:
Module Size Used by
ipv6 232468 14
loop 12988 0
snd_intel8x0 25900 2
snd_ac97_codec 91260 1 snd_intel8x0
ac97_bus 1444 1 snd_ac97_codec
snd_pcm_oss 31708 0
snd_mixer_oss 12000 1 snd_pcm_oss
snd_pcm 62708 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd_seq_dummy 2368 0
snd_seq_oss 24756 0
snd_seq_midi 5448 0
snd_rawmidi 18544 1 snd_seq_midi
snd_seq_midi_event 6072 2 snd_seq_oss,snd_seq_midi
snd_seq 42120 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer 17808 2 snd_pcm,snd_seq
snd_seq_device 6108 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
snd 48420 14 snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
psmouse 36628 0
soundcore 6204 1 snd
shpchp 26836 0
k8temp 3868 0
pcspkr 2092 0
serio_raw 4544 0
snd_page_alloc 8036 2 snd_intel8x0,snd_pcm
pci_hotplug 24464 1 shpchp
evdev 8160 8
parport_pc 22020 0
parport 30868 1 parport_pc
button 5672 0
ext3 107180 2
jbd 42500 1 ext3
mbcache 7180 1 ext3
ide_cd_mod 25532 0
cdrom 29804 1 ide_cd_mod
ide_gd_mod 18904 4
ide_pci_generic 3408 0
8139cp 17356 0
ata_generic 4316 0
sata_sis 4836 0
pata_sis 2776 1 sata_sis
libata 148892 3 ata_generic,sata_sis,pata_sis
ohci_hcd 20164 0
8139too 21164 0
mii 4648 2 8139cp,8139too
sis5513 6696 3
scsi_mod 132076 1 libata
ehci_hcd 29936 0
usbcore 124912 3 ohci_hcd,ehci_hcd
ide_core 91812 4 ide_cd_mod,ide_gd_mod,ide_pci_generic,sis5513
thermal 15092 0
processor 39540 1 thermal
fan 4104 0
thermal_sys 10272 3 thermal,processor,fan
** PCI devices:
00:00.0 Host bridge [0600]: Silicon Integrated Systems [SiS] 761/M761 Host [1039:0761] (rev 01)
Subsystem: Foxconn International, Inc. Device [105b:0c6c]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at d8000000 (32-bit, non-prefetchable) [size=64M]
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Silicon Integrated Systems [SiS] SG86C202 [1039:0002] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 99
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: dfa00000-dfafffff
Prefetchable memory behind bridge: d0000000-d7ffffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:02.0 ISA bridge [0601]: Silicon Integrated Systems [SiS] SiS966 [MuTIOL Media IO] [1039:0966] (rev 59)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:02.5 IDE interface [0101]: Silicon Integrated Systems [SiS] 5513 [IDE] [1039:5513] (rev 01) (prog-if 80 [Master])
Subsystem: Foxconn International, Inc. Device [105b:0c6c]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 128
Interrupt: pin ? routed to IRQ 16
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 4000 [size=16]
Capabilities: <access denied>
Kernel driver in use: SIS_IDE
00:02.7 Multimedia audio controller [0401]: Silicon Integrated Systems [SiS] AC'97 Sound Controller [1039:7012] (rev a0)
Subsystem: Foxconn International, Inc. Device [105b:0c6c]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 52 (13000ns min, 2750ns max)
Interrupt: pin C routed to IRQ 18
Region 0: I/O ports at f600 [size=256]
Region 1: I/O ports at fe00 [size=128]
Capabilities: <access denied>
Kernel driver in use: Intel ICH
00:03.0 USB Controller [0c03]: Silicon Integrated Systems [SiS] USB 1.1 Controller [1039:7001] (rev 0f) (prog-if 10 [OHCI])
Subsystem: Foxconn International, Inc. Device [105b:0c6c]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (20000ns max)
Interrupt: pin A routed to IRQ 20
Region 0: Memory at dffff000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:03.1 USB Controller [0c03]: Silicon Integrated Systems [SiS] USB 1.1 Controller [1039:7001] (rev 0f) (prog-if 10 [OHCI])
Subsystem: Foxconn International, Inc. Device [105b:0c6c]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (20000ns max)
Interrupt: pin B routed to IRQ 21
Region 0: Memory at dfffe000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:03.3 USB Controller [0c03]: Silicon Integrated Systems [SiS] USB 2.0 Controller [1039:7002] (prog-if 20 [EHCI])
Subsystem: Foxconn International, Inc. Device [105b:0c6c]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (20000ns max)
Interrupt: pin D routed to IRQ 23
Region 0: Memory at dfffd000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:05.0 IDE interface [0101]: Silicon Integrated Systems [SiS] SATA Controller / IDE mode [1039:1183] (rev 02) (prog-if 85 [Master SecO PriO])
Subsystem: Foxconn International, Inc. Device [105b:0c6c]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at fd00 [size=8]
Region 1: I/O ports at fc00 [size=4]
Region 2: I/O ports at fb00 [size=8]
Region 3: I/O ports at fa00 [size=4]
Region 4: I/O ports at f900 [size=16]
Region 5: I/O ports at f800 [size=128]
Capabilities: <access denied>
Kernel driver in use: sata_sis
00:06.0 PCI bridge [0604]: Silicon Integrated Systems [SiS] PCI-to-PCI bridge [1039:000a] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: dfe00000-dfefffff
Prefetchable memory behind bridge: 00000000dfd00000-00000000dfdfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
00:07.0 PCI bridge [0604]: Silicon Integrated Systems [SiS] PCI-to-PCI bridge [1039:000a] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: dfc00000-dfcfffff
Prefetchable memory behind bridge: 00000000dfb00000-00000000dfbfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
00:08.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
Subsystem: Foxconn International, Inc. Device [105b:0c6c]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at f400 [size=256]
Region 1: Memory at dfffc000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: 8139too
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: k8temp
00:1f.0 PCI bridge [0604]: Silicon Integrated Systems [SiS] PCI-to-PCI bridge [1039:0004] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: df900000-df9fffff
Prefetchable memory behind bridge: 00000000df800000-00000000df8fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
01:00.0 VGA compatible controller [0300]: Silicon Integrated Systems [SiS] 661/741/760 PCI/AGP or 662/761Gx PCIE VGA Display Adapter [1039:6330] (rev 03) (prog-if 00 [VGA controller])
Subsystem: Foxconn International, Inc. Device [105b:0c6c]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 10
BIST result: 00
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M]
Region 1: Memory at dfae0000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at cf00 [size=128]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (990, 'testing'), (500, 'unstable')
Architecture: i386 (i686)
Kernel: Linux 2.6.29-2-686 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.29-2-686 depends on:
ii debconf [debconf-2.0] 1.5.26 Debian configuration management sy
ii initramfs-tools [linux-initra 0.93.2 tools for generating an initramfs
ii module-init-tools 3.7-pre9-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.29-2-686 recommends:
ii libc6-i686 2.9-12 GNU C Library: Shared libraries [i
Versions of packages linux-image-2.6.29-2-686 suggests:
ii grub 0.97-53 GRand Unified Bootloader (Legacy v
pn linux-doc-2.6.29 <none> (no description available)
-- debconf information:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.29-2-686/preinst/lilo-has-ramdisk:
linux-image-2.6.29-2-686/postinst/depmod-error-2.6.29-2-686: false
linux-image-2.6.29-2-686/postinst/kimage-is-a-directory:
linux-image-2.6.29-2-686/preinst/overwriting-modules-2.6.29-2-686: true
linux-image-2.6.29-2-686/postinst/bootloader-error-2.6.29-2-686:
linux-image-2.6.29-2-686/preinst/abort-install-2.6.29-2-686:
linux-image-2.6.29-2-686/postinst/create-kimage-link-2.6.29-2-686: true
linux-image-2.6.29-2-686/preinst/failed-to-move-modules-2.6.29-2-686:
linux-image-2.6.29-2-686/preinst/initrd-2.6.29-2-686:
linux-image-2.6.29-2-686/postinst/old-dir-initrd-link-2.6.29-2-686: true
linux-image-2.6.29-2-686/postinst/old-initrd-link-2.6.29-2-686: true
linux-image-2.6.29-2-686/prerm/removing-running-kernel-2.6.29-2-686: true
linux-image-2.6.29-2-686/postinst/bootloader-test-error-2.6.29-2-686:
linux-image-2.6.29-2-686/postinst/old-system-map-link-2.6.29-2-686: true
linux-image-2.6.29-2-686/preinst/bootloader-initrd-2.6.29-2-686: true
linux-image-2.6.29-2-686/postinst/depmod-error-initrd-2.6.29-2-686: false
linux-image-2.6.29-2-686/preinst/elilo-initrd-2.6.29-2-686: true
linux-image-2.6.29-2-686/prerm/would-invalidate-boot-loader-2.6.29-2-686: true
linux-image-2.6.29-2-686/preinst/lilo-initrd-2.6.29-2-686: true
linux-image-2.6.29-2-686/preinst/abort-overwrite-2.6.29-2-686:
--- End Message ---