Bug#524442: marked as done (linux-image-2.6.29-1-686: hangs starting hald when booting into multiuser mode)

To: Moritz Muehlenhoff <jmm@inutil.org>
Subject: Bug#524442: marked as done (linux-image-2.6.29-1-686: hangs starting hald when booting into multiuser mode)
From: owner@bugs.debian.org (Debian Bug Tracking System)
Date: Thu, 23 Jul 2009 19:57:15 +0000
Message-id: <[🔎] handler.524442.D524442.12483785753598.ackdone@bugs.debian.org>
References: <20090723194926.GA15272@galadriel.inutil.org> <20090417072432.7026.64100.reportbug@kooka>

Your message dated Thu, 23 Jul 2009 21:49:26 +0200
with message-id <20090723194926.GA15272@galadriel.inutil.org>
and subject line Re: Bug#515258: hal hangs with 2.6.29-rc5
has caused the Debian Bug report #524442,
regarding linux-image-2.6.29-1-686: hangs starting hald when booting into multiuser mode
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
524442: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=524442
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems

--- Begin Message ---

To: Debian Bug Tracking System <submit@bugs.debian.org>
Subject: linux-image-2.6.29-1-686: hangs starting hald when booting into multiuser mode
From: Stuart Pook <debian47@pook.es>
Date: Fri, 17 Apr 2009 09:24:32 +0200
Message-id: <20090417072432.7026.64100.reportbug@kooka>

Package: linux-image-2.6.29-1-686
Version: 2.6.29-2
Severity: important

This kernel boots fine into single user mode but when I drop into multi
user mode (or boot directly into multiuser mode) hald hangs and I have
to reset my machine. I normally use 2.6.28-1-686 which works fine.

:; dpkg -l hal
ii  hal                  0.5.12~git20090406.4 Hardware Abstraction Layer

There are some interesting messages in /var/syslog

Apr 17 08:55:43 kooka kernel: [    2.592084] WARNING: at /build/buildd-linux-2.6_2.6.29-2-i386-SgPO4R/linux-2.6-2.6.29/debian/build/source_i386_none/kernel/irq/manage.c:222 __enable_irq+0x24/0x43()
Apr 17 08:55:43 kooka kernel: [    2.592144] Hardware name: P35-DS3R
Apr 17 08:55:43 kooka kernel: [    2.592179] Unbalanced enable for IRQ 16
Apr 17 08:55:43 kooka kernel: [    2.592221] Modules linked in: ahci(+) uhci_hcd libata pdc202xx_new(+) ehci_hcd r8169 mii jmicron(+) ide_core scsi_mod usbcore intel_agp agpgart thermal processor fan thermal_sys
Apr 17 08:55:43 kooka kernel: [    2.592718] Pid: 521, comm: modprobe Not tainted 2.6.29-1-686 #1

Here is the contents of /var/log/syslog while running 2.6.29

Apr 17 08:55:43 kooka kernel: [    0.000000] Linux version 2.6.29-1-686 (Debian 2.6.29-2) (waldi@debian.org) (gcc version 4.3.3 (Debian 4.3.3-5) ) #1 SMP Sat Apr 4 17:36:29 UTC 2009
Apr 17 08:55:43 kooka kernel: [    0.000000] KERNEL supported cpus:
Apr 17 08:55:43 kooka kernel: [    0.000000]   Intel GenuineIntel
Apr 17 08:55:43 kooka kernel: [    0.000000]   AMD AuthenticAMD
Apr 17 08:55:43 kooka kernel: [    0.000000]   NSC Geode by NSC
Apr 17 08:55:43 kooka kernel: [    0.000000]   Cyrix CyrixInstead
Apr 17 08:55:43 kooka kernel: [    0.000000]   Centaur CentaurHauls
Apr 17 08:55:43 kooka kernel: [    0.000000]   Transmeta GenuineTMx86
Apr 17 08:55:43 kooka kernel: [    0.000000]   Transmeta TransmetaCPU
Apr 17 08:55:43 kooka kernel: [    0.000000]   UMC UMC UMC UMC
Apr 17 08:55:43 kooka kernel: [    0.000000] BIOS-provided physical RAM map:
Apr 17 08:55:43 kooka kernel: [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
Apr 17 08:55:43 kooka kernel: [    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
Apr 17 08:55:43 kooka kernel: [    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Apr 17 08:55:43 kooka kernel: [    0.000000]  BIOS-e820: 0000000000100000 - 000000007fee0000 (usable)
Apr 17 08:55:43 kooka kernel: [    0.000000]  BIOS-e820: 000000007fee0000 - 000000007fee3000 (ACPI NVS)
Apr 17 08:55:43 kooka kernel: [    0.000000]  BIOS-e820: 000000007fee3000 - 000000007fef0000 (ACPI data)
Apr 17 08:55:43 kooka kernel: [    0.000000]  BIOS-e820: 000000007fef0000 - 000000007ff00000 (reserved)
Apr 17 08:55:43 kooka kernel: [    0.000000]  BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
Apr 17 08:55:43 kooka kernel: [    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
Apr 17 08:55:43 kooka kernel: [    0.000000] DMI 2.4 present.
Apr 17 08:55:43 kooka kernel: [    0.000000] last_pfn = 0x7fee0 max_arch_pfn = 0x100000
Apr 17 08:55:43 kooka kernel: [    0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000
Apr 17 08:55:43 kooka kernel: [    0.000000] RAMDISK: 37825000 - 37fefe14
Apr 17 08:55:43 kooka kernel: [    0.000000] Allocated new RAMDISK: 004b4000 - 00c7ee14
Apr 17 08:55:43 kooka kernel: [    0.000000] Move RAMDISK from 0000000037825000 - 0000000037fefe13 to 004b4000 - 00c7ee13
Apr 17 08:55:43 kooka kernel: [    0.000000] ACPI: RSDP 000F6C30, 0014 (r0 GBT   )
Apr 17 08:55:43 kooka kernel: [    0.000000] ACPI: RSDT 7FEE3040, 003C (r1 GBT    GBTUACPI 42302E31 GBTU  1010101)
Apr 17 08:55:43 kooka kernel: [    0.000000] ACPI: FACP 7FEE30C0, 0074 (r1 GBT    GBTUACPI 42302E31 GBTU  1010101)
Apr 17 08:55:43 kooka kernel: [    0.000000] FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4)
Apr 17 08:55:43 kooka kernel: [    0.000000] ACPI: DSDT 7FEE3180, 4B32 (r1 GBT    GBTUACPI     1000 MSFT  100000C)
Apr 17 08:55:43 kooka kernel: [    0.000000] ACPI: FACS 7FEE0000, 0040
Apr 17 08:55:43 kooka kernel: [    0.000000] ACPI: HPET 7FEE7E00, 0038 (r1 GBT    GBTUACPI 42302E31 GBTU       98)
Apr 17 08:55:43 kooka kernel: [    0.000000] ACPI: MCFG 7FEE7E80, 003C (r1 GBT    GBTUACPI 42302E31 GBTU  1010101)
Apr 17 08:55:43 kooka kernel: [    0.000000] ACPI: APIC 7FEE7D00, 0084 (r1 GBT    GBTUACPI 42302E31 GBTU  1010101)
Apr 17 08:55:43 kooka kernel: [    0.000000] ACPI: SSDT 7FEE7F00, 015C (r1  PmRef  Cpu0Ist     3000 INTL 20040311)
Apr 17 08:55:43 kooka kernel: [    0.000000] ACPI: SSDT 7FEE8390, 0275 (r1  PmRef    CpuPm     3000 INTL 20040311)
Apr 17 08:55:43 kooka kernel: [    0.000000] ACPI: Local APIC address 0xfee00000
Apr 17 08:55:43 kooka kernel: [    0.000000] 1158MB HIGHMEM available.
Apr 17 08:55:43 kooka kernel: [    0.000000] 887MB LOWMEM available.
Apr 17 08:55:43 kooka kernel: [    0.000000]   mapped low ram: 0 - 377fe000
Apr 17 08:55:43 kooka kernel: [    0.000000]   low ram: 00000000 - 377fe000
Apr 17 08:55:43 kooka kernel: [    0.000000]   bootmap 00008000 - 0000ef00
Apr 17 08:55:43 kooka kernel: [    0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
Apr 17 08:55:43 kooka kernel: [    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
Apr 17 08:55:43 kooka kernel: [    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
Apr 17 08:55:43 kooka kernel: [    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
Apr 17 08:55:43 kooka kernel: [    0.000000]   #3 [0000100000 - 00004b0574]    TEXT DATA BSS ==> [0000100000 - 00004b0574]
Apr 17 08:55:43 kooka kernel: [    0.000000]   #4 [00004b1000 - 00004b4000]    INIT_PG_TABLE ==> [00004b1000 - 00004b4000]
Apr 17 08:55:43 kooka kernel: [    0.000000]   #5 [000009e800 - 0000100000]    BIOS reserved ==> [000009e800 - 0000100000]
Apr 17 08:55:43 kooka kernel: [    0.000000]   #6 [0000007000 - 0000008000]          PGTABLE ==> [0000007000 - 0000008000]
Apr 17 08:55:43 kooka kernel: [    0.000000]   #7 [00004b4000 - 0000c7ee14]      NEW RAMDISK ==> [00004b4000 - 0000c7ee14]
Apr 17 08:55:43 kooka kernel: [    0.000000]   #8 [0000008000 - 000000f000]          BOOTMAP ==> [0000008000 - 000000f000]
Apr 17 08:55:43 kooka kernel: [    0.000000] found SMP MP-table at [c00f5240] 000f5240
Apr 17 08:55:43 kooka kernel: [    0.000000] Zone PFN ranges:
Apr 17 08:55:43 kooka kernel: [    0.000000]   DMA      0x00000000 -> 0x00001000
Apr 17 08:55:43 kooka kernel: [    0.000000]   Normal   0x00001000 -> 0x000377fe
Apr 17 08:55:43 kooka kernel: [    0.000000]   HighMem  0x000377fe -> 0x0007fee0
Apr 17 08:55:43 kooka kernel: [    0.000000] Movable zone start PFN for each node
Apr 17 08:55:43 kooka kernel: [    0.000000] early_node_map[2] active PFN ranges
Apr 17 08:55:43 kooka kernel: [    0.000000]     0: 0x00000000 -> 0x0000009e
Apr 17 08:55:43 kooka kernel: [    0.000000]     0: 0x00000100 -> 0x0007fee0
Apr 17 08:55:43 kooka kernel: [    0.000000] On node 0 totalpages: 523902
Apr 17 08:55:43 kooka kernel: [    0.000000] free_area_init_node: node 0, pgdat c03bf660, node_mem_map c1000000
Apr 17 08:55:43 kooka kernel: [    0.000000]   DMA zone: 32 pages used for memmap
Apr 17 08:55:43 kooka kernel: [    0.000000]   DMA zone: 0 pages reserved
Apr 17 08:55:43 kooka kernel: [    0.000000]   DMA zone: 3966 pages, LIFO batch:0
Apr 17 08:55:43 kooka kernel: [    0.000000]   Normal zone: 1744 pages used for memmap
Apr 17 08:55:43 kooka kernel: [    0.000000]   Normal zone: 221486 pages, LIFO batch:31
Apr 17 08:55:43 kooka kernel: [    0.000000]   HighMem zone: 2318 pages used for memmap
Apr 17 08:55:43 kooka kernel: [    0.000000]   HighMem zone: 294356 pages, LIFO batch:31
Apr 17 08:55:43 kooka kernel: [    0.000000] ACPI: PM-Timer IO Port: 0x408
Apr 17 08:55:43 kooka kernel: [    0.000000] ACPI: Local APIC address 0xfee00000
Apr 17 08:55:43 kooka kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Apr 17 08:55:43 kooka kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Apr 17 08:55:43 kooka kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
Apr 17 08:55:43 kooka kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
Apr 17 08:55:43 kooka kernel: [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
Apr 17 08:55:43 kooka kernel: [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
Apr 17 08:55:43 kooka kernel: [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
Apr 17 08:55:43 kooka kernel: [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
Apr 17 08:55:43 kooka kernel: [    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Apr 17 08:55:43 kooka kernel: [    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
Apr 17 08:55:43 kooka kernel: [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Apr 17 08:55:43 kooka kernel: [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Apr 17 08:55:43 kooka kernel: [    0.000000] ACPI: IRQ0 used by override.
Apr 17 08:55:43 kooka kernel: [    0.000000] ACPI: IRQ2 used by override.
Apr 17 08:55:43 kooka kernel: [    0.000000] ACPI: IRQ9 used by override.
Apr 17 08:55:43 kooka kernel: [    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
Apr 17 08:55:43 kooka kernel: [    0.000000] Using ACPI (MADT) for SMP configuration information
Apr 17 08:55:43 kooka kernel: [    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
Apr 17 08:55:43 kooka kernel: [    0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
Apr 17 08:55:43 kooka kernel: [    0.000000] nr_irqs_gsi: 24
Apr 17 08:55:43 kooka kernel: [    0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
Apr 17 08:55:43 kooka kernel: [    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
Apr 17 08:55:43 kooka kernel: [    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Apr 17 08:55:43 kooka kernel: [    0.000000] Allocating PCI resources starting at 80000000 (gap: 7ff00000:70100000)
Apr 17 08:55:43 kooka kernel: [    0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
Apr 17 08:55:43 kooka kernel: [    0.000000] PERCPU: Allocating 32768 bytes of per cpu data
Apr 17 08:55:43 kooka kernel: [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 519808
Apr 17 08:55:43 kooka kernel: [    0.000000] Kernel command line: root=/dev/mapper/vg0-root32 ro single
Apr 17 08:55:43 kooka kernel: [    0.000000] Enabling fast FPU save and restore... done.
Apr 17 08:55:43 kooka kernel: [    0.000000] Enabling unmasked SIMD FPU exception support... done.
Apr 17 08:55:43 kooka kernel: [    0.000000] Initializing CPU#0
Apr 17 08:55:43 kooka kernel: [    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
Apr 17 08:55:43 kooka kernel: [    0.000000] Fast TSC calibration using PIT
Apr 17 08:55:43 kooka kernel: [    0.000000] Detected 2333.310 MHz processor.
Apr 17 08:55:43 kooka kernel: [    0.004000] Console: colour VGA+ 80x25
Apr 17 08:55:43 kooka kernel: [    0.004000] console [tty0] enabled
Apr 17 08:55:43 kooka kernel: [    0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Apr 17 08:55:43 kooka kernel: [    0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Apr 17 08:55:43 kooka kernel: [    0.004000] Memory: 2065636k/2096000k available (1957k kernel code, 29148k reserved, 952k data, 324k init, 1186696k highmem)
Apr 17 08:55:43 kooka kernel: [    0.004000] virtual kernel memory layout:
Apr 17 08:55:43 kooka kernel: [    0.004000]     fixmap  : 0xfff50000 - 0xfffff000   ( 700 kB)
Apr 17 08:55:43 kooka kernel: [    0.004000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
Apr 17 08:55:43 kooka kernel: [    0.004000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
Apr 17 08:55:43 kooka kernel: [    0.004000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
Apr 17 08:55:43 kooka kernel: [    0.004000]       .init : 0xc03dd000 - 0xc042e000   ( 324 kB)
Apr 17 08:55:43 kooka kernel: [    0.004000]       .data : 0xc02e94c3 - 0xc03d77e8   ( 952 kB)
Apr 17 08:55:43 kooka kernel: [    0.004000]       .text : 0xc0100000 - 0xc02e94c3   (1957 kB)
Apr 17 08:55:43 kooka kernel: [    0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
Apr 17 08:55:43 kooka kernel: [    0.004000] hpet clockevent registered
Apr 17 08:55:43 kooka kernel: [    0.004000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
Apr 17 08:55:43 kooka kernel: [    0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4666.62 BogoMIPS (lpj=9333240)
Apr 17 08:55:43 kooka kernel: [    0.004000] Security Framework initialized
Apr 17 08:55:43 kooka kernel: [    0.004000] SELinux:  Disabled at boot.
Apr 17 08:55:43 kooka kernel: [    0.004000] Mount-cache hash table entries: 512
Apr 17 08:55:43 kooka kernel: [    0.004000] Initializing cgroup subsys ns
Apr 17 08:55:43 kooka kernel: [    0.004000] Initializing cgroup subsys cpuacct
Apr 17 08:55:43 kooka kernel: [    0.004000] Initializing cgroup subsys devices
Apr 17 08:55:43 kooka kernel: [    0.004000] Initializing cgroup subsys freezer
Apr 17 08:55:43 kooka kernel: [    0.004000] Initializing cgroup subsys net_cls
Apr 17 08:55:43 kooka kernel: [    0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
Apr 17 08:55:43 kooka kernel: [    0.004000] CPU: L2 cache: 4096K
Apr 17 08:55:43 kooka kernel: [    0.004000] [ds] using Core 2/Atom configuration
Apr 17 08:55:43 kooka kernel: [    0.004000] CPU: Physical Processor ID: 0
Apr 17 08:55:43 kooka kernel: [    0.004000] CPU: Processor Core ID: 0
Apr 17 08:55:43 kooka kernel: [    0.004000] Intel machine check architecture supported.
Apr 17 08:55:43 kooka kernel: [    0.004000] Intel machine check reporting enabled on CPU#0.
Apr 17 08:55:43 kooka kernel: [    0.004000] using mwait in idle threads.
Apr 17 08:55:43 kooka kernel: [    0.004000] Checking 'hlt' instruction... OK.
Apr 17 08:55:43 kooka kernel: [    0.017606] ACPI: Core revision 20081204
Apr 17 08:55:43 kooka kernel: [    0.024363] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
Apr 17 08:55:43 kooka kernel: [    0.064683] CPU0: Intel(R) Core(TM)2 Duo CPU     E6550  @ 2.33GHz stepping 0b
Apr 17 08:55:43 kooka kernel: [    0.068001] Booting processor 1 APIC 0x1 ip 0x6000
Apr 17 08:55:43 kooka kernel: [    0.004000] Initializing CPU#1
Apr 17 08:55:43 kooka kernel: [    0.004000] Calibrating delay using timer specific routine.. 4666.64 BogoMIPS (lpj=9333285)
Apr 17 08:55:43 kooka kernel: [    0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
Apr 17 08:55:43 kooka kernel: [    0.004000] CPU: L2 cache: 4096K
Apr 17 08:55:43 kooka kernel: [    0.004000] [ds] using Core 2/Atom configuration
Apr 17 08:55:43 kooka kernel: [    0.004000] CPU: Physical Processor ID: 0
Apr 17 08:55:43 kooka kernel: [    0.004000] CPU: Processor Core ID: 1
Apr 17 08:55:43 kooka kernel: [    0.004000] Intel machine check architecture supported.
Apr 17 08:55:43 kooka kernel: [    0.004000] Intel machine check reporting enabled on CPU#1.
Apr 17 08:55:43 kooka kernel: [    0.152588] CPU1: Intel(R) Core(TM)2 Duo CPU     E6550  @ 2.33GHz stepping 0b
Apr 17 08:55:43 kooka kernel: [    0.152999] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Apr 17 08:55:43 kooka kernel: [    0.156025] Brought up 2 CPUs
Apr 17 08:55:43 kooka kernel: [    0.156061] Total of 2 processors activated (9333.26 BogoMIPS).
Apr 17 08:55:43 kooka kernel: [    0.156138] CPU0 attaching sched-domain:
Apr 17 08:55:43 kooka kernel: [    0.156140]  domain 0: span 0-1 level MC
Apr 17 08:55:43 kooka kernel: [    0.156142]   groups: 0 1
Apr 17 08:55:43 kooka kernel: [    0.156146] CPU1 attaching sched-domain:
Apr 17 08:55:43 kooka kernel: [    0.156147]  domain 0: span 0-1 level MC
Apr 17 08:55:43 kooka kernel: [    0.156149]   groups: 1 0
Apr 17 08:55:43 kooka kernel: [    0.156200] net_namespace: 1056 bytes
Apr 17 08:55:43 kooka kernel: [    0.156200] Booting paravirtualized kernel on bare hardware
Apr 17 08:55:43 kooka kernel: [    0.156200] regulator: core version 0.5
Apr 17 08:55:43 kooka kernel: [    0.156225] NET: Registered protocol family 16
Apr 17 08:55:43 kooka kernel: [    0.156225] ACPI: bus type pci registered
Apr 17 08:55:43 kooka kernel: [    0.156225] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
Apr 17 08:55:43 kooka kernel: [    0.156225] PCI: MCFG area at f0000000 reserved in E820
Apr 17 08:55:43 kooka kernel: [    0.156225] PCI: Using MMCONFIG for extended config space
Apr 17 08:55:43 kooka kernel: [    0.156225] PCI: Using configuration type 1 for base access
Apr 17 08:55:43 kooka kernel: [    0.156225] bio: create slab <bio-0> at 0
Apr 17 08:55:43 kooka kernel: [    0.156525] ACPI: EC: Look up EC in DSDT
Apr 17 08:55:43 kooka kernel: [    0.164401] ACPI: Interpreter enabled
Apr 17 08:55:43 kooka kernel: [    0.164445] ACPI: (supports S0 S3 S4 S5)
Apr 17 08:55:43 kooka kernel: [    0.164591] ACPI: Using IOAPIC for interrupt routing
Apr 17 08:55:43 kooka kernel: [    0.168736] ACPI: No dock devices found.
Apr 17 08:55:43 kooka kernel: [    0.168736] ACPI: PCI Root Bridge [PCI0] (0000:00)
Apr 17 08:55:43 kooka kernel: [    0.168736] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
Apr 17 08:55:43 kooka kernel: [    0.168736] pci 0000:00:01.0: PME# disabled
Apr 17 08:55:43 kooka kernel: [    0.168736] pci 0000:00:1a.0: reg 20 io port: [0xe000-0xe01f]
Apr 17 08:55:43 kooka kernel: [    0.168736] pci 0000:00:1a.1: reg 20 io port: [0xe100-0xe11f]
Apr 17 08:55:43 kooka kernel: [    0.168736] pci 0000:00:1a.2: reg 20 io port: [0xe500-0xe51f]
Apr 17 08:55:43 kooka kernel: [    0.168736] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfb105000-0xfb1053ff]
Apr 17 08:55:43 kooka kernel: [    0.168736] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfb100000-0xfb103fff]
Apr 17 08:55:43 kooka kernel: [    0.168736] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
Apr 17 08:55:43 kooka kernel: [    0.168736] pci 0000:00:1b.0: PME# disabled
Apr 17 08:55:43 kooka kernel: [    0.168736] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
Apr 17 08:55:43 kooka kernel: [    0.168736] pci 0000:00:1c.0: PME# disabled
Apr 17 08:55:43 kooka kernel: [    0.168738] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
Apr 17 08:55:43 kooka kernel: [    0.169492] pci 0000:00:1c.3: PME# disabled
Apr 17 08:55:43 kooka kernel: [    0.169576] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
Apr 17 08:55:43 kooka kernel: [    0.169614] pci 0000:00:1c.4: PME# disabled
Apr 17 08:55:43 kooka kernel: [    0.169695] pci 0000:00:1d.0: reg 20 io port: [0xe200-0xe21f]
Apr 17 08:55:43 kooka kernel: [    0.169756] pci 0000:00:1d.1: reg 20 io port: [0xe300-0xe31f]
Apr 17 08:55:43 kooka kernel: [    0.169817] pci 0000:00:1d.2: reg 20 io port: [0xe400-0xe41f]
Apr 17 08:55:43 kooka kernel: [    0.169868] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfb104000-0xfb1043ff]
Apr 17 08:55:43 kooka kernel: [    0.172009] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
Apr 17 08:55:43 kooka kernel: [    0.172056] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
Apr 17 08:55:43 kooka kernel: [    0.172095] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f)
Apr 17 08:55:43 kooka kernel: [    0.172142] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f)
Apr 17 08:55:43 kooka kernel: [    0.172242] pci 0000:00:1f.2: reg 10 io port: [0xe600-0xe607]
Apr 17 08:55:43 kooka kernel: [    0.172247] pci 0000:00:1f.2: reg 14 io port: [0xe700-0xe703]
Apr 17 08:55:43 kooka kernel: [    0.172251] pci 0000:00:1f.2: reg 18 io port: [0xe800-0xe807]
Apr 17 08:55:43 kooka kernel: [    0.172256] pci 0000:00:1f.2: reg 1c io port: [0xe900-0xe903]
Apr 17 08:55:43 kooka kernel: [    0.172261] pci 0000:00:1f.2: reg 20 io port: [0xea00-0xea1f]
Apr 17 08:55:43 kooka kernel: [    0.172266] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfb106000-0xfb1067ff]
Apr 17 08:55:43 kooka kernel: [    0.172294] pci 0000:00:1f.2: PME# supported from D3hot
Apr 17 08:55:43 kooka kernel: [    0.172331] pci 0000:00:1f.2: PME# disabled
Apr 17 08:55:43 kooka kernel: [    0.172389] pci 0000:00:1f.3: reg 10 64bit mmio: [0xfb107000-0xfb1070ff]
Apr 17 08:55:43 kooka kernel: [    0.172401] pci 0000:00:1f.3: reg 20 io port: [0x500-0x51f]
Apr 17 08:55:43 kooka kernel: [    0.172439] pci 0000:01:00.0: reg 10 32bit mmio: [0xf4000000-0xf4ffffff]
Apr 17 08:55:43 kooka kernel: [    0.172446] pci 0000:01:00.0: reg 14 64bit mmio: [0xe0000000-0xefffffff]
Apr 17 08:55:43 kooka kernel: [    0.172453] pci 0000:01:00.0: reg 1c 64bit mmio: [0xf5000000-0xf5ffffff]
Apr 17 08:55:43 kooka kernel: [    0.172458] pci 0000:01:00.0: reg 24 io port: [0xa000-0xa07f]
Apr 17 08:55:43 kooka kernel: [    0.172462] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
Apr 17 08:55:43 kooka kernel: [    0.172511] pci 0000:00:01.0: bridge io port: [0xa000-0xafff]
Apr 17 08:55:43 kooka kernel: [    0.172513] pci 0000:00:01.0: bridge 32bit mmio: [0xf4000000-0xf6ffffff]
Apr 17 08:55:43 kooka kernel: [    0.172517] pci 0000:00:01.0: bridge 64bit mmio pref: [0xe0000000-0xefffffff]
Apr 17 08:55:43 kooka kernel: [    0.172550] pci 0000:00:1c.0: bridge io port: [0x9000-0x9fff]
Apr 17 08:55:43 kooka kernel: [    0.172637] pci 0000:03:00.0: reg 24 32bit mmio: [0xfb000000-0xfb001fff]
Apr 17 08:55:43 kooka kernel: [    0.172673] pci 0000:03:00.0: PME# supported from D3hot
Apr 17 08:55:43 kooka kernel: [    0.172713] pci 0000:03:00.0: PME# disabled
Apr 17 08:55:43 kooka kernel: [    0.172795] pci 0000:03:00.1: reg 10 io port: [0xb000-0xb007]
Apr 17 08:55:43 kooka kernel: [    0.172803] pci 0000:03:00.1: reg 14 io port: [0xb100-0xb103]
Apr 17 08:55:43 kooka kernel: [    0.172811] pci 0000:03:00.1: reg 18 io port: [0xb200-0xb207]
Apr 17 08:55:43 kooka kernel: [    0.172819] pci 0000:03:00.1: reg 1c io port: [0xb300-0xb303]
Apr 17 08:55:43 kooka kernel: [    0.172827] pci 0000:03:00.1: reg 20 io port: [0xb400-0xb40f]
Apr 17 08:55:43 kooka kernel: [    0.172908] pci 0000:00:1c.3: bridge io port: [0xb000-0xbfff]
Apr 17 08:55:43 kooka kernel: [    0.172911] pci 0000:00:1c.3: bridge 32bit mmio: [0xfb000000-0xfb0fffff]
Apr 17 08:55:43 kooka kernel: [    0.172966] pci 0000:04:00.0: reg 10 io port: [0xc000-0xc0ff]
Apr 17 08:55:43 kooka kernel: [    0.172987] pci 0000:04:00.0: reg 18 64bit mmio: [0xf8000000-0xf8000fff]
Apr 17 08:55:43 kooka kernel: [    0.173007] pci 0000:04:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
Apr 17 08:55:43 kooka kernel: [    0.173051] pci 0000:04:00.0: supports D1 D2
Apr 17 08:55:43 kooka kernel: [    0.173053] pci 0000:04:00.0: PME# supported from D1 D2 D3hot D3cold
Apr 17 08:55:43 kooka kernel: [    0.173094] pci 0000:04:00.0: PME# disabled
Apr 17 08:55:43 kooka kernel: [    0.173168] pci 0000:00:1c.4: bridge io port: [0xc000-0xcfff]
Apr 17 08:55:43 kooka kernel: [    0.173172] pci 0000:00:1c.4: bridge 32bit mmio: [0xf7000000-0xf8ffffff]
Apr 17 08:55:43 kooka kernel: [    0.173205] pci 0000:05:00.0: reg 10 io port: [0xd000-0xd007]
Apr 17 08:55:43 kooka kernel: [    0.173211] pci 0000:05:00.0: reg 14 io port: [0xd100-0xd103]
Apr 17 08:55:43 kooka kernel: [    0.173217] pci 0000:05:00.0: reg 18 io port: [0xd200-0xd207]
Apr 17 08:55:43 kooka kernel: [    0.173223] pci 0000:05:00.0: reg 1c io port: [0xd300-0xd303]
Apr 17 08:55:43 kooka kernel: [    0.173229] pci 0000:05:00.0: reg 20 io port: [0xd400-0xd40f]
Apr 17 08:55:43 kooka kernel: [    0.173235] pci 0000:05:00.0: reg 24 32bit mmio: [0xfa000000-0xfa003fff]
Apr 17 08:55:43 kooka kernel: [    0.173241] pci 0000:05:00.0: reg 30 32bit mmio: [0x000000-0x003fff]
Apr 17 08:55:43 kooka kernel: [    0.173259] pci 0000:05:00.0: supports D1
Apr 17 08:55:43 kooka kernel: [    0.173298] pci 0000:00:1e.0: transparent bridge
Apr 17 08:55:43 kooka kernel: [    0.173336] pci 0000:00:1e.0: bridge io port: [0xd000-0xdfff]
Apr 17 08:55:43 kooka kernel: [    0.173339] pci 0000:00:1e.0: bridge 32bit mmio: [0xf9000000-0xfaffffff]
Apr 17 08:55:43 kooka kernel: [    0.173360] pci_bus 0000:00: on NUMA node 0
Apr 17 08:55:43 kooka kernel: [    0.173365] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Apr 17 08:55:43 kooka kernel: [    0.173514] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
Apr 17 08:55:43 kooka kernel: [    0.173568] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
Apr 17 08:55:43 kooka kernel: [    0.173623] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
Apr 17 08:55:43 kooka kernel: [    0.173675] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
Apr 17 08:55:43 kooka kernel: [    0.188085] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
Apr 17 08:55:43 kooka kernel: [    0.188535] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
Apr 17 08:55:43 kooka kernel: [    0.189027] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
Apr 17 08:55:43 kooka kernel: [    0.189470] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 14 *15)
Apr 17 08:55:43 kooka kernel: [    0.189913] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
Apr 17 08:55:43 kooka kernel: [    0.190355] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
Apr 17 08:55:43 kooka kernel: [    0.192230] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
Apr 17 08:55:43 kooka kernel: [    0.192672] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 11 12 *14 15)
Apr 17 08:55:43 kooka kernel: [    0.193067] PCI: Using ACPI for IRQ routing
Apr 17 08:55:43 kooka kernel: [    0.208029] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
Apr 17 08:55:43 kooka kernel: [    0.208196] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Apr 17 08:55:43 kooka kernel: [    0.232088] pnp: PnP ACPI init
Apr 17 08:55:43 kooka kernel: [    0.232129] ACPI: bus type pnp registered
Apr 17 08:55:43 kooka kernel: [    0.234718] pnp: PnP ACPI: found 13 devices
Apr 17 08:55:43 kooka kernel: [    0.234754] ACPI: ACPI bus type pnp unregistered
Apr 17 08:55:43 kooka kernel: [    0.234793] PnPBIOS: Disabled by ACPI PNP
Apr 17 08:55:43 kooka kernel: [    0.234834] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
Apr 17 08:55:43 kooka kernel: [    0.234872] system 00:01: ioport range 0x290-0x29f has been reserved
Apr 17 08:55:43 kooka kernel: [    0.234909] system 00:01: ioport range 0x800-0x87f has been reserved
Apr 17 08:55:43 kooka kernel: [    0.234947] system 00:01: ioport range 0x290-0x294 has been reserved
Apr 17 08:55:43 kooka kernel: [    0.234985] system 00:01: ioport range 0x880-0x88f has been reserved
Apr 17 08:55:43 kooka kernel: [    0.235026] system 00:09: ioport range 0x400-0x4bf could not be reserved
Apr 17 08:55:43 kooka kernel: [    0.235067] system 00:0a: iomem range 0xf0000000-0xf3ffffff has been reserved
Apr 17 08:55:43 kooka kernel: [    0.235108] system 00:0b: iomem range 0xd1e00-0xd3fff has been reserved
Apr 17 08:55:43 kooka kernel: [    0.235146] system 00:0b: iomem range 0xf0000-0xf7fff could not be reserved
Apr 17 08:55:43 kooka kernel: [    0.235184] system 00:0b: iomem range 0xf8000-0xfbfff could not be reserved
Apr 17 08:55:43 kooka kernel: [    0.235222] system 00:0b: iomem range 0xfc000-0xfffff could not be reserved
Apr 17 08:55:43 kooka kernel: [    0.235261] system 00:0b: iomem range 0x7fee0000-0x7fefffff could not be reserved
Apr 17 08:55:43 kooka kernel: [    0.235306] system 00:0b: iomem range 0x0-0x9ffff could not be reserved
Apr 17 08:55:43 kooka kernel: [    0.235344] system 00:0b: iomem range 0x100000-0x7fedffff could not be reserved
Apr 17 08:55:43 kooka kernel: [    0.235390] system 00:0b: iomem range 0xfec00000-0xfec00fff has been reserved
Apr 17 08:55:43 kooka kernel: [    0.235428] system 00:0b: iomem range 0xfed10000-0xfed1dfff has been reserved
Apr 17 08:55:43 kooka kernel: [    0.235467] system 00:0b: iomem range 0xfed20000-0xfed8ffff has been reserved
Apr 17 08:55:43 kooka kernel: [    0.235505] system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved
Apr 17 08:55:43 kooka kernel: [    0.235544] system 00:0b: iomem range 0xffb00000-0xffb7ffff has been reserved
Apr 17 08:55:43 kooka kernel: [    0.235582] system 00:0b: iomem range 0xfff00000-0xffffffff has been reserved
Apr 17 08:55:43 kooka kernel: [    0.235621] system 00:0b: iomem range 0xe0000-0xeffff has been reserved
Apr 17 08:55:43 kooka kernel: [    0.270507] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
Apr 17 08:55:43 kooka kernel: [    0.270545] pci 0000:00:01.0:   IO window: 0xa000-0xafff
Apr 17 08:55:43 kooka kernel: [    0.270583] pci 0000:00:01.0:   MEM window: 0xf4000000-0xf6ffffff
Apr 17 08:55:43 kooka kernel: [    0.270621] pci 0000:00:01.0:   PREFETCH window: 0x000000e0000000-0x000000efffffff
Apr 17 08:55:43 kooka kernel: [    0.270668] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
Apr 17 08:55:43 kooka kernel: [    0.270706] pci 0000:00:1c.0:   IO window: 0x9000-0x9fff
Apr 17 08:55:43 kooka kernel: [    0.270745] pci 0000:00:1c.0:   MEM window: disabled
Apr 17 08:55:43 kooka kernel: [    0.270782] pci 0000:00:1c.0:   PREFETCH window: disabled
Apr 17 08:55:43 kooka kernel: [    0.270822] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:03
Apr 17 08:55:43 kooka kernel: [    0.270860] pci 0000:00:1c.3:   IO window: 0xb000-0xbfff
Apr 17 08:55:43 kooka kernel: [    0.270899] pci 0000:00:1c.3:   MEM window: 0xfb000000-0xfb0fffff
Apr 17 08:55:43 kooka kernel: [    0.270937] pci 0000:00:1c.3:   PREFETCH window: disabled
Apr 17 08:55:43 kooka kernel: [    0.270977] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:04
Apr 17 08:55:43 kooka kernel: [    0.271015] pci 0000:00:1c.4:   IO window: 0xc000-0xcfff
Apr 17 08:55:43 kooka kernel: [    0.271053] pci 0000:00:1c.4:   MEM window: 0xf7000000-0xf8ffffff
Apr 17 08:55:43 kooka kernel: [    0.271092] pci 0000:00:1c.4:   PREFETCH window: 0x00000080000000-0x000000800fffff
Apr 17 08:55:43 kooka kernel: [    0.271141] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
Apr 17 08:55:43 kooka kernel: [    0.271179] pci 0000:00:1e.0:   IO window: 0xd000-0xdfff
Apr 17 08:55:43 kooka kernel: [    0.271217] pci 0000:00:1e.0:   MEM window: 0xf9000000-0xfaffffff
Apr 17 08:55:43 kooka kernel: [    0.271256] pci 0000:00:1e.0:   PREFETCH window: 0x00000080100000-0x000000801fffff
Apr 17 08:55:43 kooka kernel: [    0.271310] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Apr 17 08:55:43 kooka kernel: [    0.271350] pci 0000:00:01.0: setting latency timer to 64
Apr 17 08:55:43 kooka kernel: [    0.271355] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Apr 17 08:55:43 kooka kernel: [    0.271395] pci 0000:00:1c.0: setting latency timer to 64
Apr 17 08:55:43 kooka kernel: [    0.271401] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
Apr 17 08:55:43 kooka kernel: [    0.271440] pci 0000:00:1c.3: setting latency timer to 64
Apr 17 08:55:43 kooka kernel: [    0.271446] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Apr 17 08:55:43 kooka kernel: [    0.271485] pci 0000:00:1c.4: setting latency timer to 64
Apr 17 08:55:43 kooka kernel: [    0.271490] pci 0000:00:1e.0: setting latency timer to 64
Apr 17 08:55:43 kooka kernel: [    0.271493] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
Apr 17 08:55:43 kooka kernel: [    0.271495] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
Apr 17 08:55:43 kooka kernel: [    0.271497] pci_bus 0000:01: resource 0 io:  [0xa000-0xafff]
Apr 17 08:55:43 kooka kernel: [    0.271499] pci_bus 0000:01: resource 1 mem: [0xf4000000-0xf6ffffff]
Apr 17 08:55:43 kooka kernel: [    0.271501] pci_bus 0000:01: resource 2 mem: [0xe0000000-0xefffffff]
Apr 17 08:55:43 kooka kernel: [    0.271503] pci_bus 0000:01: resource 3 mem: [0x0-0x0]
Apr 17 08:55:43 kooka kernel: [    0.271504] pci_bus 0000:02: resource 0 io:  [0x9000-0x9fff]
Apr 17 08:55:43 kooka kernel: [    0.271506] pci_bus 0000:02: resource 1 mem: [0x0-0x0]
Apr 17 08:55:43 kooka kernel: [    0.271508] pci_bus 0000:02: resource 2 mem: [0x0-0x0]
Apr 17 08:55:43 kooka kernel: [    0.271509] pci_bus 0000:02: resource 3 mem: [0x0-0x0]
Apr 17 08:55:43 kooka kernel: [    0.271511] pci_bus 0000:03: resource 0 io:  [0xb000-0xbfff]
Apr 17 08:55:43 kooka kernel: [    0.271513] pci_bus 0000:03: resource 1 mem: [0xfb000000-0xfb0fffff]
Apr 17 08:55:43 kooka kernel: [    0.271514] pci_bus 0000:03: resource 2 mem: [0x0-0x0]
Apr 17 08:55:43 kooka kernel: [    0.271516] pci_bus 0000:03: resource 3 mem: [0x0-0x0]
Apr 17 08:55:43 kooka kernel: [    0.271518] pci_bus 0000:04: resource 0 io:  [0xc000-0xcfff]
Apr 17 08:55:43 kooka kernel: [    0.271519] pci_bus 0000:04: resource 1 mem: [0xf7000000-0xf8ffffff]
Apr 17 08:55:43 kooka kernel: [    0.271521] pci_bus 0000:04: resource 2 mem: [0x80000000-0x800fffff]
Apr 17 08:55:43 kooka kernel: [    0.271523] pci_bus 0000:04: resource 3 mem: [0x0-0x0]
Apr 17 08:55:43 kooka kernel: [    0.271525] pci_bus 0000:05: resource 0 io:  [0xd000-0xdfff]
Apr 17 08:55:43 kooka kernel: [    0.271526] pci_bus 0000:05: resource 1 mem: [0xf9000000-0xfaffffff]
Apr 17 08:55:43 kooka kernel: [    0.271528] pci_bus 0000:05: resource 2 mem: [0x80100000-0x801fffff]
Apr 17 08:55:43 kooka kernel: [    0.271530] pci_bus 0000:05: resource 3 io:  [0x00-0xffff]
Apr 17 08:55:43 kooka kernel: [    0.271532] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffff]
Apr 17 08:55:43 kooka kernel: [    0.271570] NET: Registered protocol family 2
Apr 17 08:55:43 kooka kernel: [    0.312357] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
Apr 17 08:55:43 kooka kernel: [    0.312630] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
Apr 17 08:55:43 kooka kernel: [    0.312970] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
Apr 17 08:55:43 kooka kernel: [    0.313141] TCP: Hash tables configured (established 131072 bind 65536)
Apr 17 08:55:43 kooka kernel: [    0.313179] TCP reno registered
Apr 17 08:55:43 kooka kernel: [    0.324416] NET: Registered protocol family 1
Apr 17 08:55:43 kooka kernel: [    0.324543] checking if image is initramfs...<7>Switched to high resolution mode on CPU 1
Apr 17 08:55:43 kooka kernel: [    0.504356] Switched to high resolution mode on CPU 0
Apr 17 08:55:43 kooka kernel: [    0.555001]  it is
Apr 17 08:55:43 kooka kernel: [    0.807046] Freeing initrd memory: 7979k freed
Apr 17 08:55:43 kooka kernel: [    0.807763] audit: initializing netlink socket (disabled)
Apr 17 08:55:43 kooka kernel: [    0.807814] type=2000 audit(1239951220.804:1): initialized
Apr 17 08:55:43 kooka kernel: [    0.808033] highmem bounce pool size: 64 pages
Apr 17 08:55:43 kooka kernel: [    0.808071] HugeTLB registered 4 MB page size, pre-allocated 0 pages
Apr 17 08:55:43 kooka kernel: [    0.808169] VFS: Disk quotas dquot_6.5.2
Apr 17 08:55:43 kooka kernel: [    0.808229] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Apr 17 08:55:43 kooka kernel: [    0.808310] msgmni has been set to 1733
Apr 17 08:55:43 kooka kernel: [    0.808444] alg: No test for stdrng (krng)
Apr 17 08:55:43 kooka kernel: [    0.808526] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
Apr 17 08:55:43 kooka kernel: [    0.808573] io scheduler noop registered
Apr 17 08:55:43 kooka kernel: [    0.808608] io scheduler anticipatory registered
Apr 17 08:55:43 kooka kernel: [    0.808644] io scheduler deadline registered
Apr 17 08:55:43 kooka kernel: [    0.808687] io scheduler cfq registered (default)
Apr 17 08:55:43 kooka kernel: [    0.808856] pci 0000:01:00.0: Boot video device
Apr 17 08:55:43 kooka kernel: [    0.808947] pcieport-driver 0000:00:01.0: setting latency timer to 64
Apr 17 08:55:43 kooka kernel: [    0.808991] pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X
Apr 17 08:55:43 kooka kernel: [    0.809082] pcieport-driver 0000:00:1c.0: setting latency timer to 64
Apr 17 08:55:43 kooka kernel: [    0.809128] pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X
Apr 17 08:55:43 kooka kernel: [    0.809255] pcieport-driver 0000:00:1c.3: setting latency timer to 64
Apr 17 08:55:43 kooka kernel: [    0.809300] pcieport-driver 0000:00:1c.3: irq 26 for MSI/MSI-X
Apr 17 08:55:43 kooka kernel: [    0.809428] pcieport-driver 0000:00:1c.4: setting latency timer to 64
Apr 17 08:55:43 kooka kernel: [    0.809473] pcieport-driver 0000:00:1c.4: irq 27 for MSI/MSI-X
Apr 17 08:55:43 kooka kernel: [    0.809793] isapnp: Scanning for PnP cards...
Apr 17 08:55:43 kooka kernel: [    1.162647] isapnp: No Plug & Play device found
Apr 17 08:55:43 kooka kernel: [    1.164934] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Apr 17 08:55:43 kooka kernel: [    1.165073] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Apr 17 08:55:43 kooka kernel: [    1.165471] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Apr 17 08:55:43 kooka kernel: [    1.166779] brd: module loaded
Apr 17 08:55:43 kooka kernel: [    1.166925] PNP: No PS/2 controller found. Probing ports directly.
Apr 17 08:55:43 kooka kernel: [    1.199540] Failed to disable AUX port, but continuing anyway... Is this a SiS?
Apr 17 08:55:43 kooka kernel: [    1.199586] If AUX port is really absent please use the 'i8042.noaux' option.
Apr 17 08:55:43 kooka kernel: [    1.448088] serio: i8042 KBD port at 0x60,0x64 irq 1
Apr 17 08:55:43 kooka kernel: [    1.448200] mice: PS/2 mouse device common for all mice
Apr 17 08:55:43 kooka kernel: [    1.448288] rtc_cmos 00:04: RTC can wake from S4
Apr 17 08:55:43 kooka kernel: [    1.448363] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
Apr 17 08:55:43 kooka kernel: [    1.448419] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
Apr 17 08:55:43 kooka kernel: [    1.448483] cpuidle: using governor ladder
Apr 17 08:55:43 kooka kernel: [    1.448519] cpuidle: using governor menu
Apr 17 08:55:43 kooka kernel: [    1.448556] No iBFT detected.
Apr 17 08:55:43 kooka kernel: [    1.448882] TCP cubic registered
Apr 17 08:55:43 kooka kernel: [    1.448917] NET: Registered protocol family 17
Apr 17 08:55:43 kooka kernel: [    1.448959] Using IPI No-Shortcut mode
Apr 17 08:55:43 kooka kernel: [    1.449090] registered taskstats version 1
Apr 17 08:55:43 kooka kernel: [    1.449247] rtc_cmos 00:04: setting system clock to 2009-04-17 06:53:42 UTC (1239951222)
Apr 17 08:55:43 kooka kernel: [    1.449418] Freeing unused kernel memory: 324k freed
Apr 17 08:55:43 kooka kernel: [    1.530560] processor ACPI_CPU:00: registered as cooling_device0
Apr 17 08:55:43 kooka kernel: [    1.530607] ACPI: Processor [CPU0] (supports 8 throttling states)
Apr 17 08:55:43 kooka kernel: [    1.530846] ACPI: SSDT 7FEE8300, 0087 (r1  PmRef  Cpu1Ist     3000 INTL 20040311)
Apr 17 08:55:43 kooka kernel: [    1.531121] processor ACPI_CPU:01: registered as cooling_device1
Apr 17 08:55:43 kooka kernel: [    1.531160] ACPI: Processor [CPU1] (supports 8 throttling states)
Apr 17 08:55:43 kooka kernel: [    1.574556] Linux agpgart interface v0.103
Apr 17 08:55:43 kooka kernel: [    1.588430] usbcore: registered new interface driver usbfs
Apr 17 08:55:43 kooka kernel: [    1.588498] usbcore: registered new interface driver hub
Apr 17 08:55:43 kooka kernel: [    1.590865] usbcore: registered new device driver usb
Apr 17 08:55:43 kooka kernel: [    1.601244] SCSI subsystem initialized
Apr 17 08:55:43 kooka kernel: [    1.615721] Uniform Multi-Platform E-IDE driver
Apr 17 08:55:43 kooka kernel: [    1.617905] jmicron 0000:03:00.1: IDE controller (0x197b:0x2363 rev 0x02)
Apr 17 08:55:43 kooka kernel: [    1.617954] JMicron IDE 0000:03:00.1: enabling device (0000 -> 0001)
Apr 17 08:55:43 kooka kernel: [    1.617996] JMicron IDE 0000:03:00.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
Apr 17 08:55:43 kooka kernel: [    1.618053] jmicron 0000:03:00.1: 100% native mode on irq 16
Apr 17 08:55:43 kooka kernel: [    1.618098] JMicron IDE 0000:03:00.1: setting latency timer to 64
Apr 17 08:55:43 kooka kernel: [    1.618103]     ide0: BM-DMA at 0xb400-0xb407
Apr 17 08:55:43 kooka kernel: [    1.618146]     ide1: BM-DMA at 0xb408-0xb40f
Apr 17 08:55:43 kooka kernel: [    1.618186] Probing IDE interface ide0...
Apr 17 08:55:43 kooka kernel: [    1.633243] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
Apr 17 08:55:43 kooka kernel: [    1.633292] r8169 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Apr 17 08:55:43 kooka kernel: [    1.633341] r8169 0000:04:00.0: setting latency timer to 64
Apr 17 08:55:43 kooka kernel: [    1.633452] r8169 0000:04:00.0: irq 28 for MSI/MSI-X
Apr 17 08:55:43 kooka kernel: [    1.633688] eth0: RTL8168b/8111b at 0xf81be000, 00:1a:4d:4c:37:f9, XID 38000000 IRQ 28
Apr 17 08:55:43 kooka kernel: [    1.638477] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Apr 17 08:55:43 kooka kernel: [    1.638535] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Apr 17 08:55:43 kooka kernel: [    1.638589] ehci_hcd 0000:00:1a.7: setting latency timer to 64
Apr 17 08:55:43 kooka kernel: [    1.638592] ehci_hcd 0000:00:1a.7: EHCI Host Controller
Apr 17 08:55:43 kooka kernel: [    1.638657] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
Apr 17 08:55:43 kooka kernel: [    1.642586] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
Apr 17 08:55:43 kooka kernel: [    1.642599] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfb105000
Apr 17 08:55:43 kooka kernel: [    1.649300] pdc202xx_new 0000:05:00.0: IDE controller (0x105a:0x4d68 rev 0x02)
Apr 17 08:55:43 kooka kernel: [    1.649361] Promise_IDE 0000:05:00.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
Apr 17 08:55:43 kooka kernel: [    1.659373] pdc202xx_new 0000:05:00.0: PLL input clock is 16647 kHz
Apr 17 08:55:43 kooka kernel: [    1.660008] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
Apr 17 08:55:43 kooka kernel: [    1.660779] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
Apr 17 08:55:43 kooka kernel: [    1.660817] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr 17 08:55:43 kooka kernel: [    1.660863] usb usb1: Product: EHCI Host Controller
Apr 17 08:55:43 kooka kernel: [    1.660898] usb usb1: Manufacturer: Linux 2.6.29-1-686 ehci_hcd
Apr 17 08:55:43 kooka kernel: [    1.660935] usb usb1: SerialNumber: 0000:00:1a.7
Apr 17 08:55:43 kooka kernel: [    1.661029] usb usb1: configuration #1 chosen from 1 choice
Apr 17 08:55:43 kooka kernel: [    1.661090] hub 1-0:1.0: USB hub found
Apr 17 08:55:43 kooka kernel: [    1.661129] hub 1-0:1.0: 6 ports detected
Apr 17 08:55:43 kooka kernel: [    1.661265] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
Apr 17 08:55:43 kooka kernel: [    1.661322] ehci_hcd 0000:00:1d.7: setting latency timer to 64
Apr 17 08:55:43 kooka kernel: [    1.661324] ehci_hcd 0000:00:1d.7: EHCI Host Controller
Apr 17 08:55:43 kooka kernel: [    1.661378] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
Apr 17 08:55:43 kooka kernel: [    1.665324] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
Apr 17 08:55:43 kooka kernel: [    1.665337] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfb104000
Apr 17 08:55:43 kooka kernel: [    1.684005] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
Apr 17 08:55:43 kooka kernel: [    1.684051] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
Apr 17 08:55:43 kooka kernel: [    1.684090] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr 17 08:55:43 kooka kernel: [    1.684134] usb usb2: Product: EHCI Host Controller
Apr 17 08:55:43 kooka kernel: [    1.684170] usb usb2: Manufacturer: Linux 2.6.29-1-686 ehci_hcd
Apr 17 08:55:43 kooka kernel: [    1.684207] usb usb2: SerialNumber: 0000:00:1d.7
Apr 17 08:55:43 kooka kernel: [    1.684275] usb usb2: configuration #1 chosen from 1 choice
Apr 17 08:55:43 kooka kernel: [    1.684332] hub 2-0:1.0: USB hub found
Apr 17 08:55:43 kooka kernel: [    1.684370] hub 2-0:1.0: 6 ports detected
Apr 17 08:55:43 kooka kernel: [    1.689181] pdc202xx_new 0000:05:00.0: 100% native mode on irq 20
Apr 17 08:55:43 kooka kernel: [    1.689222]     ide2: BM-DMA at 0xd400-0xd407
Apr 17 08:55:43 kooka kernel: [    1.689263]     ide3: BM-DMA at 0xd408-0xd40f
Apr 17 08:55:43 kooka kernel: [    1.689301] Probing IDE interface ide2...
Apr 17 08:55:43 kooka kernel: [    1.698298] libata version 3.00 loaded.
Apr 17 08:55:43 kooka kernel: [    1.702591] uhci_hcd: USB Universal Host Controller Interface driver
Apr 17 08:55:43 kooka kernel: [    1.702659] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Apr 17 08:55:43 kooka kernel: [    1.702704] uhci_hcd 0000:00:1a.0: setting latency timer to 64
Apr 17 08:55:43 kooka kernel: [    1.702707] uhci_hcd 0000:00:1a.0: UHCI Host Controller
Apr 17 08:55:43 kooka kernel: [    1.702766] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
Apr 17 08:55:43 kooka kernel: [    1.702839] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e000
Apr 17 08:55:43 kooka kernel: [    1.702903] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
Apr 17 08:55:43 kooka kernel: [    1.702943] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr 17 08:55:43 kooka kernel: [    1.702989] usb usb3: Product: UHCI Host Controller
Apr 17 08:55:43 kooka kernel: [    1.703026] usb usb3: Manufacturer: Linux 2.6.29-1-686 uhci_hcd
Apr 17 08:55:43 kooka kernel: [    1.703063] usb usb3: SerialNumber: 0000:00:1a.0
Apr 17 08:55:43 kooka kernel: [    1.703144] usb usb3: configuration #1 chosen from 1 choice
Apr 17 08:55:43 kooka kernel: [    1.703203] hub 3-0:1.0: USB hub found
Apr 17 08:55:43 kooka kernel: [    1.703242] hub 3-0:1.0: 2 ports detected
Apr 17 08:55:43 kooka kernel: [    1.703355] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
Apr 17 08:55:43 kooka kernel: [    1.703397] uhci_hcd 0000:00:1a.1: setting latency timer to 64
Apr 17 08:55:43 kooka kernel: [    1.703399] uhci_hcd 0000:00:1a.1: UHCI Host Controller
Apr 17 08:55:43 kooka kernel: [    1.703452] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
Apr 17 08:55:43 kooka kernel: [    1.703521] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000e100
Apr 17 08:55:43 kooka kernel: [    1.703582] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
Apr 17 08:55:43 kooka kernel: [    1.703620] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr 17 08:55:43 kooka kernel: [    1.703666] usb usb4: Product: UHCI Host Controller
Apr 17 08:55:43 kooka kernel: [    1.703702] usb usb4: Manufacturer: Linux 2.6.29-1-686 uhci_hcd
Apr 17 08:55:43 kooka kernel: [    1.703740] usb usb4: SerialNumber: 0000:00:1a.1
Apr 17 08:55:43 kooka kernel: [    1.703810] usb usb4: configuration #1 chosen from 1 choice
Apr 17 08:55:43 kooka kernel: [    1.703866] hub 4-0:1.0: USB hub found
Apr 17 08:55:43 kooka kernel: [    1.703904] hub 4-0:1.0: 2 ports detected
Apr 17 08:55:43 kooka kernel: [    1.704038] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Apr 17 08:55:43 kooka kernel: [    1.704081] uhci_hcd 0000:00:1a.2: setting latency timer to 64
Apr 17 08:55:43 kooka kernel: [    1.704083] uhci_hcd 0000:00:1a.2: UHCI Host Controller
Apr 17 08:55:43 kooka kernel: [    1.704136] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
Apr 17 08:55:43 kooka kernel: [    1.704200] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000e500
Apr 17 08:55:43 kooka kernel: [    1.704259] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
Apr 17 08:55:43 kooka kernel: [    1.704297] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr 17 08:55:43 kooka kernel: [    1.704343] usb usb5: Product: UHCI Host Controller
Apr 17 08:55:43 kooka kernel: [    1.704380] usb usb5: Manufacturer: Linux 2.6.29-1-686 uhci_hcd
Apr 17 08:55:43 kooka kernel: [    1.704417] usb usb5: SerialNumber: 0000:00:1a.2
Apr 17 08:55:43 kooka kernel: [    1.704488] usb usb5: configuration #1 chosen from 1 choice
Apr 17 08:55:43 kooka kernel: [    1.704546] hub 5-0:1.0: USB hub found
Apr 17 08:55:43 kooka kernel: [    1.704584] hub 5-0:1.0: 2 ports detected
Apr 17 08:55:43 kooka kernel: [    1.704692] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
Apr 17 08:55:43 kooka kernel: [    1.704734] uhci_hcd 0000:00:1d.0: setting latency timer to 64
Apr 17 08:55:43 kooka kernel: [    1.704736] uhci_hcd 0000:00:1d.0: UHCI Host Controller
Apr 17 08:55:43 kooka kernel: [    1.704788] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
Apr 17 08:55:43 kooka kernel: [    1.704850] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e200
Apr 17 08:55:43 kooka kernel: [    1.704909] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
Apr 17 08:55:43 kooka kernel: [    1.704947] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr 17 08:55:43 kooka kernel: [    1.704992] usb usb6: Product: UHCI Host Controller
Apr 17 08:55:43 kooka kernel: [    1.705028] usb usb6: Manufacturer: Linux 2.6.29-1-686 uhci_hcd
Apr 17 08:55:43 kooka kernel: [    1.705065] usb usb6: SerialNumber: 0000:00:1d.0
Apr 17 08:55:43 kooka kernel: [    1.705134] usb usb6: configuration #1 chosen from 1 choice
Apr 17 08:55:43 kooka kernel: [    1.705189] hub 6-0:1.0: USB hub found
Apr 17 08:55:43 kooka kernel: [    1.705227] hub 6-0:1.0: 2 ports detected
Apr 17 08:55:43 kooka kernel: [    1.705334] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
Apr 17 08:55:43 kooka kernel: [    1.705375] uhci_hcd 0000:00:1d.1: setting latency timer to 64
Apr 17 08:55:43 kooka kernel: [    1.705378] uhci_hcd 0000:00:1d.1: UHCI Host Controller
Apr 17 08:55:43 kooka kernel: [    1.705430] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
Apr 17 08:55:43 kooka kernel: [    1.705500] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e300
Apr 17 08:55:43 kooka kernel: [    1.705558] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
Apr 17 08:55:43 kooka kernel: [    1.705597] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr 17 08:55:43 kooka kernel: [    1.705642] usb usb7: Product: UHCI Host Controller
Apr 17 08:55:43 kooka kernel: [    1.705678] usb usb7: Manufacturer: Linux 2.6.29-1-686 uhci_hcd
Apr 17 08:55:43 kooka kernel: [    1.705715] usb usb7: SerialNumber: 0000:00:1d.1
Apr 17 08:55:43 kooka kernel: [    1.705786] usb usb7: configuration #1 chosen from 1 choice
Apr 17 08:55:43 kooka kernel: [    1.705843] hub 7-0:1.0: USB hub found
Apr 17 08:55:43 kooka kernel: [    1.705882] hub 7-0:1.0: 2 ports detected
Apr 17 08:55:43 kooka kernel: [    1.705989] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Apr 17 08:55:43 kooka kernel: [    1.706030] uhci_hcd 0000:00:1d.2: setting latency timer to 64
Apr 17 08:55:43 kooka kernel: [    1.706033] uhci_hcd 0000:00:1d.2: UHCI Host Controller
Apr 17 08:55:43 kooka kernel: [    1.706084] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
Apr 17 08:55:43 kooka kernel: [    1.706147] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e400
Apr 17 08:55:43 kooka kernel: [    1.706207] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
Apr 17 08:55:43 kooka kernel: [    1.706245] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr 17 08:55:43 kooka kernel: [    1.706291] usb usb8: Product: UHCI Host Controller
Apr 17 08:55:43 kooka kernel: [    1.706327] usb usb8: Manufacturer: Linux 2.6.29-1-686 uhci_hcd
Apr 17 08:55:43 kooka kernel: [    1.706364] usb usb8: SerialNumber: 0000:00:1d.2
Apr 17 08:55:43 kooka kernel: [    1.706437] usb usb8: configuration #1 chosen from 1 choice
Apr 17 08:55:43 kooka kernel: [    1.706493] hub 8-0:1.0: USB hub found
Apr 17 08:55:43 kooka kernel: [    1.706531] hub 8-0:1.0: 2 ports detected
Apr 17 08:55:43 kooka kernel: [    1.725089] ahci 0000:00:1f.2: version 3.0
Apr 17 08:55:43 kooka kernel: [    1.725103] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
Apr 17 08:55:43 kooka kernel: [    1.725195] ahci 0000:00:1f.2: irq 29 for MSI/MSI-X
Apr 17 08:55:43 kooka kernel: [    1.725237] ahci: SSS flag set, parallel bus scan disabled
Apr 17 08:55:43 kooka kernel: [    1.725301] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
Apr 17 08:55:43 kooka kernel: [    1.725348] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ems 
Apr 17 08:55:43 kooka kernel: [    1.725397] ahci 0000:00:1f.2: setting latency timer to 64
Apr 17 08:55:43 kooka kernel: [    1.725759] scsi0 : ahci
Apr 17 08:55:43 kooka kernel: [    1.728797] scsi1 : ahci
Apr 17 08:55:43 kooka kernel: [    1.729044] scsi2 : ahci
Apr 17 08:55:43 kooka kernel: [    1.729133] scsi3 : ahci
Apr 17 08:55:43 kooka kernel: [    1.729444] scsi4 : ahci
Apr 17 08:55:43 kooka kernel: [    1.729520] scsi5 : ahci
Apr 17 08:55:43 kooka kernel: [    1.729656] ata1: SATA max UDMA/133 abar m2048@0xfb106000 port 0xfb106100 irq 29
Apr 17 08:55:43 kooka kernel: [    1.729703] ata2: SATA max UDMA/133 abar m2048@0xfb106000 port 0xfb106180 irq 29
Apr 17 08:55:43 kooka kernel: [    1.729749] ata3: SATA max UDMA/133 abar m2048@0xfb106000 port 0xfb106200 irq 29
Apr 17 08:55:43 kooka kernel: [    1.729796] ata4: SATA max UDMA/133 abar m2048@0xfb106000 port 0xfb106280 irq 29
Apr 17 08:55:43 kooka kernel: [    1.729843] ata5: SATA max UDMA/133 abar m2048@0xfb106000 port 0xfb106300 irq 29
Apr 17 08:55:43 kooka kernel: [    1.729890] ata6: SATA max UDMA/133 abar m2048@0xfb106000 port 0xfb106380 irq 29
Apr 17 08:55:43 kooka kernel: [    1.763990] udev: renamed network interface eth0 to eth5
Apr 17 08:55:43 kooka kernel: [    1.920479] hda: ST3200822A, ATA DISK drive
Apr 17 08:55:43 kooka kernel: [    1.972018] usb 1-1: new high speed USB device using ehci_hcd and address 2
Apr 17 08:55:43 kooka kernel: [    2.104440] usb 1-1: New USB device found, idVendor=0424, idProduct=2504
Apr 17 08:55:43 kooka kernel: [    2.104479] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Apr 17 08:55:43 kooka kernel: [    2.104581] usb 1-1: configuration #1 chosen from 1 choice
Apr 17 08:55:43 kooka kernel: [    2.104710] hub 1-1:1.0: USB hub found
Apr 17 08:55:43 kooka kernel: [    2.104812] hub 1-1:1.0: 4 ports detected
Apr 17 08:55:43 kooka kernel: [    2.216063] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Apr 17 08:55:43 kooka kernel: [    2.229327] ata1.00: ATA-8: WDC WD6400AAKS-00A7B2, 01.03B01, max UDMA/133
Apr 17 08:55:43 kooka kernel: [    2.229367] ata1.00: 1250263728 sectors, multi 0: LBA48 NCQ (depth 31/32)
Apr 17 08:55:43 kooka kernel: [    2.230343] ata1.00: configured for UDMA/133
Apr 17 08:55:43 kooka kernel: [    2.244596] scsi 0:0:0:0: Direct-Access     ATA      WDC WD6400AAKS-0 01.0 PQ: 0 ANSI: 5
Apr 17 08:55:43 kooka kernel: [    2.328018] usb 1-5: new high speed USB device using ehci_hcd and address 4
Apr 17 08:55:43 kooka kernel: [    2.424392] hde: Memorex 482E CD-ROM, ATAPI CD/DVD-ROM drive
Apr 17 08:55:43 kooka kernel: [    2.460319] usb 1-5: New USB device found, idVendor=050d, idProduct=0231
Apr 17 08:55:43 kooka kernel: [    2.460358] usb 1-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Apr 17 08:55:43 kooka kernel: [    2.460439] usb 1-5: configuration #1 chosen from 1 choice
Apr 17 08:55:43 kooka kernel: [    2.460592] hub 1-5:1.0: USB hub found
Apr 17 08:55:43 kooka kernel: [    2.460693] hub 1-5:1.0: 4 ports detected
Apr 17 08:55:43 kooka kernel: [    2.564043] ata2: SATA link down (SStatus 0 SControl 300)
Apr 17 08:55:43 kooka kernel: [    2.592045] ------------[ cut here ]------------
Apr 17 08:55:43 kooka kernel: [    2.592084] WARNING: at /build/buildd-linux-2.6_2.6.29-2-i386-SgPO4R/linux-2.6-2.6.29/debian/build/source_i386_none/kernel/irq/manage.c:222 __enable_irq+0x24/0x43()
Apr 17 08:55:43 kooka kernel: [    2.592144] Hardware name: P35-DS3R
Apr 17 08:55:43 kooka kernel: [    2.592179] Unbalanced enable for IRQ 16
Apr 17 08:55:43 kooka kernel: [    2.592221] Modules linked in: ahci(+) uhci_hcd libata pdc202xx_new(+) ehci_hcd r8169 mii jmicron(+) ide_core scsi_mod usbcore intel_agp agpgart thermal processor fan thermal_sys
Apr 17 08:55:43 kooka kernel: [    2.592718] Pid: 521, comm: modprobe Not tainted 2.6.29-1-686 #1
Apr 17 08:55:43 kooka kernel: [    2.592755] Call Trace:
Apr 17 08:55:43 kooka kernel: [    2.592792]  [<c0127134>] warn_slowpath+0x80/0xb6
Apr 17 08:55:43 kooka kernel: [    2.592829]  [<c02e72ef>] schedule+0x6e1/0x758
Apr 17 08:55:43 kooka kernel: [    2.592867]  [<c012e9fd>] process_timeout+0x0/0x5
Apr 17 08:55:43 kooka kernel: [    2.592904]  [<c01174d6>] default_spin_lock_flags+0x5/0x7
Apr 17 08:55:43 kooka kernel: [    2.592942]  [<c01174d6>] default_spin_lock_flags+0x5/0x7
Apr 17 08:55:43 kooka kernel: [    2.592979]  [<c02e8481>] _spin_lock_irqsave+0x25/0x2b
Apr 17 08:55:43 kooka kernel: [    2.593016]  [<c012ece5>] lock_timer_base+0x19/0x35
Apr 17 08:55:43 kooka kernel: [    2.593053]  [<c012ed45>] try_to_del_timer_sync+0x44/0x4a
Apr 17 08:55:43 kooka kernel: [    2.593090]  [<c012ed55>] del_timer_sync+0xa/0x14
Apr 17 08:55:43 kooka kernel: [    2.593127]  [<c02e7515>] schedule_timeout+0xa6/0xbb
Apr 17 08:55:43 kooka kernel: [    2.593163]  [<c012e9fd>] process_timeout+0x0/0x5
Apr 17 08:55:43 kooka kernel: [    2.593916]  [<c012edf6>] __mod_timer+0x11/0x9f
Apr 17 08:55:43 kooka kernel: [    2.593952]  [<c012ee91>] msleep+0xd/0x12
Apr 17 08:55:43 kooka kernel: [    2.594001]  [<f817ab6d>] do_probe+0x1ab/0x1bc [ide_core]
Apr 17 08:55:43 kooka kernel: [    2.594039]  [<c015a969>] __enable_irq+0x24/0x43
Apr 17 08:55:43 kooka kernel: [    2.594075]  [<c015a9ae>] enable_irq+0x26/0x38
Apr 17 08:55:43 kooka kernel: [    2.594122]  [<f817af4b>] ide_probe_port+0x3cd/0x3d9 [ide_core]
Apr 17 08:55:43 kooka kernel: [    2.594171]  [<f817ba4f>] ide_host_register+0x225/0x540 [ide_core]
Apr 17 08:55:43 kooka kernel: [    2.594220]  [<f817e87d>] ide_pci_init_one+0xa1/0xbb [ide_core]
Apr 17 08:55:43 kooka kernel: [    2.594260]  [<c01fa61c>] ida_get_new_above+0xd4/0x178
Apr 17 08:55:43 kooka kernel: [    2.594298]  [<c01969a1>] find_inode+0x1b/0x56
Apr 17 08:55:43 kooka kernel: [    2.594335]  [<c01c4340>] sysfs_ilookup_test+0x0/0xd
Apr 17 08:55:43 kooka kernel: [    2.594372]  [<c0196abb>] wait_on_inode+0x16/0x18
Apr 17 08:55:43 kooka kernel: [    2.594408]  [<c01968ce>] iput+0x21/0x4a
Apr 17 08:55:43 kooka kernel: [    2.594444]  [<c01c48a7>] sysfs_addrm_finish+0x46/0x1a2
Apr 17 08:55:43 kooka kernel: [    2.594481]  [<c01c451b>] sysfs_find_dirent+0x13/0x23
Apr 17 08:55:43 kooka kernel: [    2.594518]  [<c01c45e9>] __sysfs_add_one+0x20/0x69
Apr 17 08:55:43 kooka kernel: [    2.594556]  [<c02070d1>] local_pci_probe+0xb/0xc
Apr 17 08:55:43 kooka kernel: [    2.594593]  [<c02079a4>] pci_device_probe+0x44/0x66
Apr 17 08:55:43 kooka kernel: [    2.594631]  [<c025e84d>] driver_probe_device+0x99/0x128
Apr 17 08:55:43 kooka kernel: [    2.594668]  [<c025e925>] __driver_attach+0x49/0x67
Apr 17 08:55:43 kooka kernel: [    2.594705]  [<c025e2e3>] bus_for_each_dev+0x35/0x5b
Apr 17 08:55:43 kooka kernel: [    2.594742]  [<c025e704>] driver_attach+0x11/0x13
Apr 17 08:55:43 kooka kernel: [    2.594778]  [<c025e8dc>] __driver_attach+0x0/0x67
Apr 17 08:55:43 kooka kernel: [    2.594815]  [<c025ddba>] bus_add_driver+0x91/0x1a1
Apr 17 08:55:43 kooka kernel: [    2.594852]  [<c025eaa9>] driver_register+0x7d/0xd3
Apr 17 08:55:43 kooka kernel: [    2.594889]  [<c0207b8f>] __pci_register_driver+0x32/0x5f
Apr 17 08:55:43 kooka kernel: [    2.594927]  [<f819a000>] jmicron_ide_init+0x0/0x14 [jmicron]
Apr 17 08:55:43 kooka kernel: [    2.594965]  [<c0101147>] _stext+0x5f/0x182
Apr 17 08:55:43 kooka kernel: [    2.595001]  [<c02e72ef>] schedule+0x6e1/0x758
Apr 17 08:55:43 kooka kernel: [    2.595037]  [<c02e7483>] schedule_timeout+0x14/0xbb
Apr 17 08:55:43 kooka kernel: [    2.595075]  [<c0120043>] enqueue_task_rt+0xf7/0x1a4
Apr 17 08:55:43 kooka kernel: [    2.595111]  [<c02e849a>] _spin_lock_irq+0x13/0x15
Apr 17 08:55:43 kooka kernel: [    2.595148]  [<c02e6b95>] wait_for_common+0x111/0x12d
Apr 17 08:55:43 kooka kernel: [    2.595185]  [<c01221c2>] default_wake_function+0x0/0x8
Apr 17 08:55:43 kooka kernel: [    2.595222]  [<c01f9e3c>] __next_cpu+0x12/0x21
Apr 17 08:55:43 kooka kernel: [    2.595259]  [<c01f9e3c>] __next_cpu+0x12/0x21
Apr 17 08:55:43 kooka kernel: [    2.595296]  [<c01525a5>] stop_machine_destroy+0x2d/0x37
Apr 17 08:55:43 kooka kernel: [    2.595334]  [<c0146e09>] load_module+0x1459/0x15e7
Apr 17 08:55:43 kooka kernel: [    2.595370]  [<c018fbd3>] path_walk+0x9b/0xa3
Apr 17 08:55:43 kooka kernel: [    2.595408]  [<c011b7f8>] place_entity+0x6c/0x9b
Apr 17 08:55:43 kooka kernel: [    2.595444]  [<c011de66>] enqueue_entity+0x6b/0x112
Apr 17 08:55:43 kooka kernel: [    2.595482]  [<c015f001>] marker_update_probe_range+0x16/0x1ed
Apr 17 08:55:43 kooka kernel: [    2.595520]  [<c015ff0e>] tracepoint_update_probe_range+0x12/0x7b
Apr 17 08:55:43 kooka kernel: [    2.595558]  [<c015ff98>] tracepoint_module_notify+0x21/0x24
Apr 17 08:55:43 kooka kernel: [    2.595596]  [<c013a2a6>] notifier_call_chain+0x2a/0x47
Apr 17 08:55:43 kooka kernel: [    2.595634]  [<c013a4fb>] __blocking_notifier_call_chain+0x3f/0x49
Apr 17 08:55:43 kooka kernel: [    2.595673]  [<c01470e3>] sys_init_module+0x87/0x182
Apr 17 08:55:43 kooka kernel: [    2.595710]  [<c0103526>] syscall_call+0x7/0xb
Apr 17 08:55:43 kooka kernel: [    2.595747]  [<c02e0000>] pci_fixup_i450nx+0xe9/0xf7
Apr 17 08:55:43 kooka kernel: [    2.595783] ---[ end trace 2485b7488d613950 ]---
Apr 17 08:55:43 kooka kernel: [    2.595855] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
Apr 17 08:55:43 kooka kernel: [    2.596078] hda: UDMA/100 mode selected
Apr 17 08:55:43 kooka kernel: [    2.596390] Probing IDE interface ide1...
Apr 17 08:55:43 kooka kernel: [    2.812020] usb 3-2: new full speed USB device using uhci_hcd and address 2
Apr 17 08:55:43 kooka kernel: [    2.900021] ata3: SATA link down (SStatus 0 SControl 300)
Apr 17 08:55:43 kooka kernel: [    3.164044] ide0 at 0xb000-0xb007,0xb102 on irq 16
Apr 17 08:55:43 kooka kernel: [    3.180356] ide1 at 0xb200-0xb207,0xb302 on irq 16
Apr 17 08:55:43 kooka kernel: [    3.186201] ide-gd driver 1.18
Apr 17 08:55:43 kooka kernel: [    3.186253] hda: max request size: 512KiB
Apr 17 08:55:43 kooka kernel: [    3.186725] hda: Host Protected Area detected.
Apr 17 08:55:43 kooka kernel: [    3.186726] 	current capacity is 390719855 sectors (200048 MB)
Apr 17 08:55:43 kooka kernel: [    3.186727] 	native  capacity is 390721968 sectors (200049 MB)
Apr 17 08:55:43 kooka kernel: [    3.187129] hda: Host Protected Area disabled.
Apr 17 08:55:43 kooka kernel: [    3.187165] hda: 390721968 sectors (200049 MB) w/8192KiB Cache, CHS=24321/255/63
Apr 17 08:55:43 kooka kernel: [    3.187429] hda: cache flushes supported
Apr 17 08:55:43 kooka kernel: [    3.187497]  hda: hda1
Apr 17 08:55:43 kooka kernel: [    3.208809] hdf: SAMSUNG CD-R/RW SW-216B Q001 20010913, ATAPI CD/DVD-ROM drive
Apr 17 08:55:43 kooka kernel: [    3.225924] usb 3-2: New USB device found, idVendor=0a5c, idProduct=4500
Apr 17 08:55:43 kooka kernel: [    3.225964] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Apr 17 08:55:43 kooka kernel: [    3.226003] usb 3-2: Product: BCM2046B1
Apr 17 08:55:43 kooka kernel: [    3.226039] usb 3-2: Manufacturer: Broadcom
Apr 17 08:55:43 kooka kernel: [    3.226135] usb 3-2: configuration #1 chosen from 1 choice
Apr 17 08:55:43 kooka kernel: [    3.228954] hub 3-2:1.0: USB hub found
Apr 17 08:55:43 kooka kernel: [    3.231603] hub 3-2:1.0: 3 ports detected
Apr 17 08:55:43 kooka kernel: [    3.240025] ata4: SATA link down (SStatus 0 SControl 300)
Apr 17 08:55:43 kooka kernel: [    3.264574] hde: host max PIO4 wanted PIO255(auto-tune) selected PIO4
Apr 17 08:55:43 kooka kernel: [    3.264625] hde: UDMA/33 mode selected
Apr 17 08:55:43 kooka kernel: [    3.264719] hdf: host max PIO4 wanted PIO255(auto-tune) selected PIO4
Apr 17 08:55:43 kooka kernel: [    3.265336] hdf: MWDMA2 mode selected
Apr 17 08:55:43 kooka kernel: [    3.267603] Probing IDE interface ide3...
Apr 17 08:55:43 kooka kernel: [    3.484037] usb 5-2: new full speed USB device using uhci_hcd and address 2
Apr 17 08:55:43 kooka kernel: [    3.572021] ata5: SATA link down (SStatus 0 SControl 300)
Apr 17 08:55:43 kooka kernel: [    3.646281] usb 5-2: New USB device found, idVendor=05e3, idProduct=0604
Apr 17 08:55:43 kooka kernel: [    3.646320] usb 5-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
Apr 17 08:55:43 kooka kernel: [    3.646359] usb 5-2: Product: USB Hub
Apr 17 08:55:43 kooka kernel: [    3.646443] usb 5-2: configuration #1 chosen from 1 choice
Apr 17 08:55:43 kooka kernel: [    3.649309] hub 5-2:1.0: USB hub found
Apr 17 08:55:43 kooka kernel: [    3.651284] hub 5-2:1.0: 4 ports detected
Apr 17 08:55:43 kooka kernel: [    3.744083] usb 1-1.1: new full speed USB device using ehci_hcd and address 6
Apr 17 08:55:43 kooka kernel: [    3.839206] usb 1-1.1: New USB device found, idVendor=05ac, idProduct=1003
Apr 17 08:55:43 kooka kernel: [    3.839246] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Apr 17 08:55:43 kooka kernel: [    3.839292] usb 1-1.1: Product: Hub in Apple Extended USB Keyboard
Apr 17 08:55:43 kooka kernel: [    3.839330] usb 1-1.1: Manufacturer: Mitsumi Electric
Apr 17 08:55:43 kooka kernel: [    3.839416] usb 1-1.1: configuration #1 chosen from 1 choice
Apr 17 08:55:43 kooka kernel: [    3.839732] hub 1-1.1:1.0: USB hub found
Apr 17 08:55:43 kooka kernel: [    3.840206] hub 1-1.1:1.0: 3 ports detected
Apr 17 08:55:43 kooka kernel: [    3.908043] ata6: SATA link down (SStatus 0 SControl 300)
Apr 17 08:55:43 kooka kernel: [    3.924042] ahci 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
Apr 17 08:55:43 kooka kernel: [    3.928086] usb 1-1.3: new low speed USB device using ehci_hcd and address 7
Apr 17 08:55:43 kooka kernel: [    3.940051] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
Apr 17 08:55:43 kooka kernel: [    3.940099] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
Apr 17 08:55:43 kooka kernel: [    3.940142] ahci 0000:03:00.0: setting latency timer to 64
Apr 17 08:55:43 kooka kernel: [    3.940261] scsi6 : ahci
Apr 17 08:55:43 kooka kernel: [    3.940413] scsi7 : ahci
Apr 17 08:55:43 kooka kernel: [    3.940513] ata7: SATA max UDMA/133 abar m8192@0xfb000000 port 0xfb000100 irq 19
Apr 17 08:55:43 kooka kernel: [    3.940560] ata8: SATA max UDMA/133 abar m8192@0xfb000000 port 0xfb000180 irq 19
Apr 17 08:55:43 kooka kernel: [    4.004895] hdg: LITE-ON DVDRW SOHW-1693S, ATAPI CD/DVD-ROM drive
Apr 17 08:55:43 kooka kernel: [    4.024834] usb 1-1.3: New USB device found, idVendor=1781, idProduct=0938
Apr 17 08:55:43 kooka kernel: [    4.024874] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Apr 17 08:55:43 kooka kernel: [    4.024920] usb 1-1.3: Product: USB IR Transceiver
Apr 17 08:55:43 kooka kernel: [    4.024957] usb 1-1.3: Manufacturer: IguanaWorks
Apr 17 08:55:43 kooka kernel: [    4.025043] usb 1-1.3: configuration #1 chosen from 1 choice
Apr 17 08:55:43 kooka kernel: [    4.096092] usb 1-5.1: new high speed USB device using ehci_hcd and address 8
Apr 17 08:55:43 kooka kernel: [    4.190335] usb 1-5.1: New USB device found, idVendor=0dda, idProduct=2005
Apr 17 08:55:43 kooka kernel: [    4.190374] usb 1-5.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Apr 17 08:55:43 kooka kernel: [    4.190421] usb 1-5.1: Product: USB2.0 Card Reader
Apr 17 08:55:43 kooka kernel: [    4.190457] usb 1-5.1: Manufacturer: ICSI
Apr 17 08:55:43 kooka kernel: [    4.190493] usb 1-5.1: SerialNumber: 0000001
Apr 17 08:55:43 kooka kernel: [    4.190582] usb 1-5.1: configuration #1 chosen from 1 choice
Apr 17 08:55:43 kooka kernel: [    4.196169] Initializing USB Mass Storage driver...
Apr 17 08:55:43 kooka kernel: [    4.197431] scsi8 : SCSI emulation for USB Mass Storage devices
Apr 17 08:55:43 kooka kernel: [    4.197537] usbcore: registered new interface driver usb-storage
Apr 17 08:55:43 kooka kernel: [    4.197576] USB Mass Storage support registered.
Apr 17 08:55:43 kooka kernel: [    4.197738] usb-storage: device found at 8
Apr 17 08:55:43 kooka kernel: [    4.197740] usb-storage: waiting for device to settle before scanning
Apr 17 08:55:43 kooka kernel: [    4.260538] ata7: SATA link down (SStatus 0 SControl 300)
Apr 17 08:55:43 kooka kernel: [    4.260598] usb 1-5.2: new full speed USB device using ehci_hcd and address 9
Apr 17 08:55:43 kooka kernel: [    4.370337] usb 1-5.2: New USB device found, idVendor=0a92, idProduct=0071
Apr 17 08:55:43 kooka kernel: [    4.370377] usb 1-5.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Apr 17 08:55:43 kooka kernel: [    4.370424] usb 1-5.2: Product: MAYA7.1 USB
Apr 17 08:55:43 kooka kernel: [    4.370464] usb 1-5.2: Manufacturer: AUDIOTRAK
Apr 17 08:55:43 kooka kernel: [    4.370554] usb 1-5.2: configuration #1 chosen from 1 choice
Apr 17 08:55:43 kooka kernel: [    4.445940] usb 3-2.1: new full speed USB device using uhci_hcd and address 3
Apr 17 08:55:43 kooka kernel: [    4.567940] usb 3-2.1: New USB device found, idVendor=0a5c, idProduct=4502
Apr 17 08:55:43 kooka kernel: [    4.567980] usb 3-2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Apr 17 08:55:43 kooka kernel: [    4.568075] usb 3-2.1: configuration #1 chosen from 1 choice
Apr 17 08:55:43 kooka kernel: [    4.577677] usbcore: registered new interface driver hiddev
Apr 17 08:55:43 kooka kernel: [    4.579163] input: HID 0a5c:4502 as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.1/3-2.1:1.0/input/input0
Apr 17 08:55:43 kooka kernel: [    4.588082] generic-usb 0003:0A5C:4502.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 0a5c:4502] on usb-0000:00:1a.0-2.1/input0
Apr 17 08:55:43 kooka kernel: [    4.588144] usbcore: registered new interface driver usbhid
Apr 17 08:55:43 kooka kernel: [    4.588183] usbhid: v2.6:USB HID core driver
Apr 17 08:55:43 kooka kernel: [    4.596546] ata8: SATA link down (SStatus 0 SControl 300)
Apr 17 08:55:43 kooka kernel: [    4.640205] Driver 'sd' needs updating - please use bus_type methods
Apr 17 08:55:43 kooka kernel: [    4.640312] sd 0:0:0:0: [sda] 1250263728 512-byte hardware sectors: (640 GB/596 GiB)
Apr 17 08:55:43 kooka kernel: [    4.640368] sd 0:0:0:0: [sda] Write Protect is off
Apr 17 08:55:43 kooka kernel: [    4.640406] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Apr 17 08:55:43 kooka kernel: [    4.640422] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Apr 17 08:55:43 kooka kernel: [    4.640523] sd 0:0:0:0: [sda] 1250263728 512-byte hardware sectors: (640 GB/596 GiB)
Apr 17 08:55:43 kooka kernel: [    4.640578] sd 0:0:0:0: [sda] Write Protect is off
Apr 17 08:55:43 kooka kernel: [    4.640614] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Apr 17 08:55:43 kooka kernel: [    4.640631] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Apr 17 08:55:43 kooka kernel: [    4.640679]  sda: sda1 sda2 sda3 sda4
Apr 17 08:55:43 kooka kernel: [    4.650168] sd 0:0:0:0: [sda] Attached SCSI disk
Apr 17 08:55:43 kooka kernel: [    4.657944] usb 3-2.2: new full speed USB device using uhci_hcd and address 4
Apr 17 08:55:43 kooka kernel: [    4.782943] usb 3-2.2: New USB device found, idVendor=0a5c, idProduct=4503
Apr 17 08:55:43 kooka kernel: [    4.782985] usb 3-2.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Apr 17 08:55:43 kooka kernel: [    4.783096] usb 3-2.2: configuration #1 chosen from 1 choice
Apr 17 08:55:43 kooka kernel: [    4.788913] hdh: ASUS CD-S520/A, ATAPI CD/DVD-ROM drive
Apr 17 08:55:43 kooka kernel: [    4.790219] input: HID 0a5c:4503 as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.2/3-2.2:1.0/input/input1
Apr 17 08:55:43 kooka kernel: [    4.808593] generic-usb 0003:0A5C:4503.0002: input,hidraw1: USB HID v1.11 Mouse [HID 0a5c:4503] on usb-0000:00:1a.0-2.2/input0
Apr 17 08:55:43 kooka kernel: [    4.844569] hdg: host max PIO4 wanted PIO255(auto-tune) selected PIO4
Apr 17 08:55:43 kooka kernel: [    4.844813] hdg: UDMA/66 mode selected
Apr 17 08:55:43 kooka kernel: [    4.845101] hdh: host max PIO4 wanted PIO255(auto-tune) selected PIO4
Apr 17 08:55:43 kooka kernel: [    4.845179] hdh: UDMA/33 mode selected
Apr 17 08:55:43 kooka kernel: [    4.845320] ide2 at 0xd000-0xd007,0xd102 on irq 20
Apr 17 08:55:43 kooka kernel: [    4.845394] ide3 at 0xd200-0xd207,0xd302 on irq 20
Apr 17 08:55:43 kooka kernel: [    4.852756] ide-cd driver 5.00
Apr 17 08:55:43 kooka kernel: [    4.853536] ide-cd: hde: ATAPI 48X CD-ROM drive, 128kB Cache
Apr 17 08:55:43 kooka kernel: [    4.853674] Uniform CD-ROM driver Revision: 3.20
Apr 17 08:55:43 kooka kernel: [    4.876807] ide-cd: hdf: ATAPI 32X CD-ROM CD-R/RW drive, 2048kB Cache
Apr 17 08:55:43 kooka kernel: [    4.881945] usb 3-2.3: new full speed USB device using uhci_hcd and address 5
Apr 17 08:55:43 kooka kernel: [    4.960255] ide-cd: hdg: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
Apr 17 08:55:43 kooka kernel: [    4.973137] ide-cd: hdh: ATAPI 52X CD-ROM drive, 128kB Cache
Apr 17 08:55:43 kooka kernel: [    5.019946] usb 3-2.3: New USB device found, idVendor=050d, idProduct=0017
Apr 17 08:55:43 kooka kernel: [    5.019986] usb 3-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Apr 17 08:55:43 kooka kernel: [    5.020039] usb 3-2.3: Product: BLUETOOTH USB +EDR ADAPTER Class 1 v2.1 UHE
Apr 17 08:55:43 kooka kernel: [    5.020077] usb 3-2.3: Manufacturer: Broadcom Corp
Apr 17 08:55:43 kooka kernel: [    5.020119] usb 3-2.3: SerialNumber: 000A3A8494D9
Apr 17 08:55:43 kooka kernel: [    5.020214] usb 3-2.3: configuration #1 chosen from 1 choice
Apr 17 08:55:43 kooka kernel: [    5.102300] usb 5-2.2: new full speed USB device using uhci_hcd and address 3
Apr 17 08:55:43 kooka kernel: [    5.173189] device-mapper: uevent: version 1.0.3
Apr 17 08:55:43 kooka kernel: [    5.173295] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
Apr 17 08:55:43 kooka kernel: [    5.220313] usb 5-2.2: New USB device found, idVendor=0d8c, idProduct=000c
Apr 17 08:55:43 kooka kernel: [    5.220357] usb 5-2.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
Apr 17 08:55:43 kooka kernel: [    5.220402] usb 5-2.2: Product: C-Media USB Headphone Set  
Apr 17 08:55:43 kooka kernel: [    5.220577] usb 5-2.2: configuration #1 chosen from 1 choice
Apr 17 08:55:43 kooka kernel: [    5.227411] input: C-Media USB Headphone Set   as /devices/pci0000:00/0000:00:1a.2/usb5/5-2/5-2.2/5-2.2:1.3/input/input2
Apr 17 08:55:43 kooka kernel: [    5.240264] generic-usb 0003:0D8C:000C.0003: input,hidraw2: USB HID v1.00 Device [C-Media USB Headphone Set  ] on usb-0000:00:1a.2-2.2/input3
Apr 17 08:55:43 kooka kernel: [    5.313306] usb 5-2.3: new full speed USB device using uhci_hcd and address 4
Apr 17 08:55:43 kooka kernel: [    5.477306] usb 5-2.3: New USB device found, idVendor=10d6, idProduct=1100
Apr 17 08:55:43 kooka kernel: [    5.477349] usb 5-2.3: New USB device strings: Mfr=0, Product=1, SerialNumber=2
Apr 17 08:55:43 kooka kernel: [    5.477395] usb 5-2.3: Product: USB 2.0(FS) FLASH DISK 
Apr 17 08:55:43 kooka kernel: [    5.477433] usb 5-2.3: SerialNumber: USB 2.0(FS) FLASH DISK 
Apr 17 08:55:43 kooka kernel: [    5.477553] usb 5-2.3: configuration #1 chosen from 1 choice
Apr 17 08:55:43 kooka kernel: [    5.480459] scsi9 : SCSI emulation for USB Mass Storage devices
Apr 17 08:55:43 kooka kernel: [    5.482315] usb-storage: device found at 4
Apr 17 08:55:43 kooka kernel: [    5.482317] usb-storage: waiting for device to settle before scanning
Apr 17 08:55:43 kooka kernel: [    5.557310] usb 5-2.4: new full speed USB device using uhci_hcd and address 5
Apr 17 08:55:43 kooka kernel: [    5.666307] usb 5-2.4: New USB device found, idVendor=0ccd, idProduct=0077
Apr 17 08:55:43 kooka kernel: [    5.666350] usb 5-2.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Apr 17 08:55:43 kooka kernel: [    5.666483] usb 5-2.4: configuration #1 chosen from 1 choice
Apr 17 08:55:43 kooka kernel: [    5.673351] input: HID 0ccd:0077 as /devices/pci0000:00/0000:00:1a.2/usb5/5-2/5-2.4/5-2.4:1.3/input/input3
Apr 17 08:55:43 kooka kernel: [    5.684594] generic-usb 0003:0CCD:0077.0004: input,hidraw3: USB HID v1.00 Device [HID 0ccd:0077] on usb-0000:00:1a.2-2.4/input3
Apr 17 08:55:43 kooka kernel: [    5.756732] usb 1-1.1.2: new low speed USB device using ehci_hcd and address 10
Apr 17 08:55:43 kooka kernel: [    5.852976] usb 1-1.1.2: New USB device found, idVendor=045e, idProduct=0040
Apr 17 08:55:43 kooka kernel: [    5.853018] usb 1-1.1.2: New USB device strings: Mfr=1, Product=3, SerialNumber=0
Apr 17 08:55:43 kooka kernel: [    5.853065] usb 1-1.1.2: Product: Microsoft 3-Button Mouse with IntelliEye(TM)
Apr 17 08:55:43 kooka kernel: [    5.853111] usb 1-1.1.2: Manufacturer: Microsoft
Apr 17 08:55:43 kooka kernel: [    5.853225] usb 1-1.1.2: configuration #1 chosen from 1 choice
Apr 17 08:55:43 kooka kernel: [    5.854266] kjournald starting.  Commit interval 5 seconds
Apr 17 08:55:43 kooka kernel: [    5.854272] EXT3-fs: mounted filesystem with ordered data mode.
Apr 17 08:55:43 kooka kernel: [    5.858376] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1.1/1-1.1.2/1-1.1.2:1.0/input/input4
Apr 17 08:55:43 kooka kernel: [    5.868626] generic-usb 0003:045E:0040.0005: input,hidraw4: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:1a.7-1.1.2/input0
Apr 17 08:55:43 kooka kernel: [    5.940733] usb 1-1.1.3: new full speed USB device using ehci_hcd and address 11
Apr 17 08:55:43 kooka kernel: [    6.038854] usb 1-1.1.3: New USB device found, idVendor=05ac, idProduct=020b
Apr 17 08:55:43 kooka kernel: [    6.038895] usb 1-1.1.3: New USB device strings: Mfr=1, Product=3, SerialNumber=0
Apr 17 08:55:43 kooka kernel: [    6.038942] usb 1-1.1.3: Product: Apple Extended USB Keyboard
Apr 17 08:55:43 kooka kernel: [    6.038980] usb 1-1.1.3: Manufacturer: Mitsumi Electric
Apr 17 08:55:43 kooka kernel: [    6.039083] usb 1-1.1.3: configuration #1 chosen from 1 choice
Apr 17 08:55:43 kooka kernel: [    6.042488] input: Mitsumi Electric Apple Extended USB Keyboard as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1.1/1-1.1.3/1-1.1.3:1.0/input/input5
Apr 17 08:55:43 kooka kernel: [    6.052576] generic-usb 0003:05AC:020B.0006: input,hidraw5: USB HID v1.10 Keyboard [Mitsumi Electric Apple Extended USB Keyboard] on usb-0000:00:1a.7-1.1.3/input0
Apr 17 08:55:43 kooka kernel: [    6.056898] input: Mitsumi Electric Apple Extended USB Keyboard as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1.1/1-1.1.3/1-1.1.3:1.1/input/input6
Apr 17 08:55:43 kooka kernel: [    6.068080] generic-usb 0003:05AC:020B.0007: input,hidraw6: USB HID v1.10 Device [Mitsumi Electric Apple Extended USB Keyboard] on usb-0000:00:1a.7-1.1.3/input1
Apr 17 08:55:43 kooka kernel: [    7.192410] udev: starting version 140
Apr 17 08:55:43 kooka kernel: [    7.411413] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
Apr 17 08:55:43 kooka kernel: [    7.420550] ACPI: Power Button (FF) [PWRF]
Apr 17 08:55:43 kooka kernel: [    7.420663] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input8
Apr 17 08:55:43 kooka kernel: [    7.432532] ACPI: Power Button (CM) [PWRB]
Apr 17 08:55:43 kooka kernel: [    7.459794] parport_pc 00:08: reported by Plug and Play ACPI
Apr 17 08:55:43 kooka kernel: [    7.459874] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
Apr 17 08:55:43 kooka kernel: [    7.535737] input: PC Speaker as /devices/platform/pcspkr/input/input9
Apr 17 08:55:43 kooka kernel: [    7.744941] Bluetooth: Core ver 2.14
Apr 17 08:55:43 kooka kernel: [    7.745164] NET: Registered protocol family 31
Apr 17 08:55:43 kooka kernel: [    7.745201] Bluetooth: HCI device and connection manager initialized
Apr 17 08:55:43 kooka kernel: [    7.745240] Bluetooth: HCI socket layer initialized
Apr 17 08:55:43 kooka kernel: [    8.128612] Bluetooth: Generic Bluetooth USB driver ver 0.4
Apr 17 08:55:43 kooka kernel: [    8.128739] usbcore: registered new interface driver btusb
Apr 17 08:55:43 kooka kernel: [    8.202911] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Apr 17 08:55:43 kooka kernel: [    8.945900] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
Apr 17 08:55:43 kooka kernel: [    8.946306] HDA Intel 0000:00:1b.0: setting latency timer to 64
Apr 17 08:55:43 kooka kernel: [    9.023611] usbcore: registered new interface driver snd-usb-audio
Apr 17 08:55:43 kooka kernel: [    9.196299] usb-storage: device scan complete
Apr 17 08:55:43 kooka kernel: [    9.197530] scsi 8:0:0:0: Direct-Access     ICSI     IC1210        CF 1.7A PQ: 0 ANSI: 0 CCS
Apr 17 08:55:43 kooka kernel: [    9.198777] scsi 8:0:0:1: Direct-Access     ICSI     IC1210        MS 1.7A PQ: 0 ANSI: 0 CCS
Apr 17 08:55:43 kooka kernel: [    9.199900] scsi 8:0:0:2: Direct-Access     ICSI     IC1210    MMC/SD 1.7A PQ: 0 ANSI: 0 CCS
Apr 17 08:55:43 kooka kernel: [    9.201025] scsi 8:0:0:3: Direct-Access     ICSI     IC1210        SM 1.7A PQ: 0 ANSI: 0 CCS
Apr 17 08:55:43 kooka kernel: [    9.202405] sd 8:0:0:0: [sdb] Attached SCSI removable disk
Apr 17 08:55:43 kooka kernel: [    9.203574] sd 8:0:0:1: [sdc] Attached SCSI removable disk
Apr 17 08:55:43 kooka kernel: [    9.204572] sd 8:0:0:2: [sdd] Attached SCSI removable disk
Apr 17 08:55:43 kooka kernel: [    9.205594] sd 8:0:0:3: [sde] Attached SCSI removable disk
Apr 17 08:55:43 kooka kernel: [   10.481378] usb-storage: device scan complete
Apr 17 08:55:43 kooka kernel: [   10.484370] scsi scan: INQUIRY result too short (5), using 36
Apr 17 08:55:43 kooka kernel: [   10.484412] scsi 9:0:0:0: Direct-Access     GENERIC  USB DISK DEVICE  1.00 PQ: 0 ANSI: 0 CCS
Apr 17 08:55:43 kooka kernel: [   10.489365] sd 9:0:0:0: [sdf] 503521 512-byte hardware sectors: (257 MB/245 MiB)
Apr 17 08:55:43 kooka kernel: [   10.492358] sd 9:0:0:0: [sdf] Write Protect is on
Apr 17 08:55:43 kooka kernel: [   10.492397] sd 9:0:0:0: [sdf] Mode Sense: 00 c0 00 80
Apr 17 08:55:43 kooka kernel: [   10.492399] sd 9:0:0:0: [sdf] Assuming drive cache: write through
Apr 17 08:55:43 kooka kernel: [   10.501359] sd 9:0:0:0: [sdf] 503521 512-byte hardware sectors: (257 MB/245 MiB)
Apr 17 08:55:43 kooka kernel: [   10.504359] sd 9:0:0:0: [sdf] Write Protect is on
Apr 17 08:55:43 kooka kernel: [   10.504398] sd 9:0:0:0: [sdf] Mode Sense: 00 c0 00 80
Apr 17 08:55:43 kooka kernel: [   10.504400] sd 9:0:0:0: [sdf] Assuming drive cache: write through
Apr 17 08:55:43 kooka kernel: [   10.504440]  sdf: sdf1
Apr 17 08:55:43 kooka kernel: [   10.513421] sd 9:0:0:0: [sdf] Attached SCSI removable disk
Apr 17 08:55:43 kooka kernel: [   11.491422] EXT3 FS on dm-10, internal journal
Apr 17 08:55:43 kooka kernel: [   12.276181] it87: Found IT8718F chip at 0x290, revision 4
Apr 17 08:55:43 kooka kernel: [   12.276225] it87: in3 is VCC (+5V)
Apr 17 08:55:43 kooka kernel: [   12.295057] coretemp coretemp.0: Using relative temperature scale!
Apr 17 08:55:43 kooka kernel: [   12.295123] coretemp coretemp.1: Using relative temperature scale!
Apr 17 08:55:43 kooka kernel: [   23.136688] kjournald starting.  Commit interval 5 seconds
Apr 17 08:55:43 kooka kernel: [   23.136860] EXT3 FS on sda2, internal journal
Apr 17 08:55:43 kooka kernel: [   23.136923] EXT3-fs: mounted filesystem with ordered data mode.
Apr 17 08:55:43 kooka kernel: [   23.142624] kjournald starting.  Commit interval 5 seconds
Apr 17 08:55:43 kooka kernel: [   23.142666] EXT3-fs: mounted filesystem with ordered data mode.
Apr 17 08:55:43 kooka kernel: [   23.158908] kjournald starting.  Commit interval 5 seconds
Apr 17 08:55:43 kooka kernel: [   23.158912] EXT3-fs: mounted filesystem with ordered data mode.
Apr 17 08:55:43 kooka kernel: [   23.516496] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
Apr 17 08:55:43 kooka kernel: [   23.700737] EXT4-fs: barriers enabled
Apr 17 08:55:43 kooka kernel: [   23.706835] kjournald2 starting: pid 3853, dev dm-17:8, commit interval 5 seconds
Apr 17 08:55:43 kooka kernel: [   23.707076] EXT4 FS on dm-17, internal journal on dm-17:8
Apr 17 08:55:43 kooka kernel: [   23.707114] EXT4-fs: delayed allocation enabled
Apr 17 08:55:43 kooka kernel: [   23.707150] EXT4-fs: file extents enabled
Apr 17 08:55:43 kooka kernel: [   23.707394] EXT4-fs: mballoc enabled
Apr 17 08:55:43 kooka kernel: [   23.707430] EXT4-fs: mounted filesystem dm-17 with ordered data mode
Apr 17 08:55:43 kooka kernel: [   23.819674] Adding 6835648k swap on /dev/mapper/swap.  Priority:20 extents:1 across:6835648k 
Apr 17 08:55:43 kooka kernel: [   24.657448] NET: Registered protocol family 10
Apr 17 08:55:43 kooka kernel: [   24.657916] lo: Disabled Privacy Extensions
Apr 17 08:55:43 kooka kernel: [   25.034998] ip_tables: (C) 2000-2006 Netfilter Core Team
Apr 17 08:55:43 kooka kernel: [   25.102673] ip6_tables: (C) 2000-2006 Netfilter Core Team
Apr 17 08:55:43 kooka kernel: [   25.289680] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
Apr 17 08:55:43 kooka kernel: [   25.289809] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
Apr 17 08:55:43 kooka kernel: [   25.289855] nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
Apr 17 08:55:43 kooka kernel: [   25.289902] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
Apr 17 08:55:43 kooka kernel: [   25.463435] Bridge firewalling registered
Apr 17 08:55:43 kooka kernel: [   25.466558] device eth5 entered promiscuous mode
Apr 17 08:55:43 kooka kernel: [   25.467414] r8169: eth5: link up
Apr 17 08:55:43 kooka kernel: [   25.467448] r8169: eth5: link up
Apr 17 08:55:43 kooka kernel: [   25.469420] br0: port 1(eth5) entering learning state
Apr 17 08:55:43 kooka kernel: [   35.736009] br0: no IPv6 routers present
Apr 17 08:55:43 kooka kernel: [   35.892012] eth5: no IPv6 routers present
Apr 17 08:55:43 kooka kernel: [   40.468007] br0: topology change detected, propagating
Apr 17 08:55:43 kooka kernel: [   40.468053] br0: port 1(eth5) entering forwarding state
Apr 17 08:55:44 kooka acpid: starting up with netlink and the input layer
Apr 17 08:55:44 kooka acpid: 0 rules loaded
Apr 17 08:55:44 kooka acpid: waiting for events: event logging is off
Apr 17 08:55:46 kooka named[4561]: starting BIND 9.5.1-P2 -u bind
Apr 17 08:55:46 kooka named[4561]: found 2 CPUs, using 2 worker threads
Apr 17 08:55:46 kooka named[4561]: using up to 4096 sockets
Apr 17 08:55:46 kooka named[4561]: loading configuration from '/etc/bind/named.conf'
Apr 17 08:55:46 kooka named[4561]: max open files (1024) is smaller than max sockets (4096)
Apr 17 08:55:46 kooka named[4561]: using default UDP/IPv4 port range: [1024, 65535]
Apr 17 08:55:46 kooka named[4561]: using default UDP/IPv6 port range: [1024, 65535]
Apr 17 08:55:46 kooka named[4561]: listening on IPv6 interface lo, ::1#53
Apr 17 08:55:46 kooka named[4561]: listening on IPv4 interface lo, 127.0.0.1#53
Apr 17 08:55:46 kooka named[4561]: listening on IPv4 interface br0, 192.168.0.8#53
Apr 17 08:55:46 kooka named[4561]: automatic empty zone: 254.169.IN-ADDR.ARPA
Apr 17 08:55:46 kooka named[4561]: automatic empty zone: 2.0.192.IN-ADDR.ARPA
Apr 17 08:55:46 kooka named[4561]: automatic empty zone: 255.255.255.255.IN-ADDR.ARPA
Apr 17 08:55:46 kooka named[4561]: automatic empty zone: 0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.IP6.ARPA
Apr 17 08:55:46 kooka named[4561]: automatic empty zone: 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.IP6.ARPA
Apr 17 08:55:46 kooka named[4561]: automatic empty zone: D.F.IP6.ARPA
Apr 17 08:55:46 kooka named[4561]: automatic empty zone: 8.E.F.IP6.ARPA
Apr 17 08:55:46 kooka named[4561]: automatic empty zone: 9.E.F.IP6.ARPA
Apr 17 08:55:46 kooka named[4561]: automatic empty zone: A.E.F.IP6.ARPA
Apr 17 08:55:46 kooka named[4561]: automatic empty zone: B.E.F.IP6.ARPA
Apr 17 08:55:46 kooka named[4561]: command channel listening on 127.0.0.1#953
Apr 17 08:55:46 kooka named[4561]: command channel listening on ::1#953
Apr 17 08:55:46 kooka named[4561]: the working directory is not writable
Apr 17 08:55:46 kooka named[4561]: zone 0.in-addr.arpa/IN: loaded serial 1
Apr 17 08:55:46 kooka named[4561]: zone 127.in-addr.arpa/IN: loaded serial 1
Apr 17 08:55:46 kooka named[4561]: zone 255.in-addr.arpa/IN: loaded serial 1
Apr 17 08:55:46 kooka named[4561]: zone localhost/IN: loaded serial 2
Apr 17 08:55:46 kooka named[4561]: running
Apr 17 08:55:47 kooka lircd-0.8.3[4594]: lircd(userspace) ready
Apr 17 08:55:47 kooka mysqld_safe[4656]: started
Apr 17 08:55:48 kooka mysqld[4660]: 090417  8:55:48  InnoDB: Started; log sequence number 0 43655
Apr 17 08:55:48 kooka mysqld[4660]: 090417  8:55:48 [Note] /usr/sbin/mysqld: ready for connections.
Apr 17 08:55:48 kooka mysqld[4660]: Version: '5.0.77-1'  socket: '/var/run/mysqld/mysqld.sock'  port: 3306  (Debian)
Apr 17 08:55:48 kooka /etc/mysql/debian-start[4700]: Upgrading MySQL tables if necessary.
Apr 17 08:55:48 kooka /etc/mysql/debian-start[4704]: Looking for 'mysql' as: /usr/bin/mysql
Apr 17 08:55:48 kooka /etc/mysql/debian-start[4704]: Looking for 'mysqlcheck' as: /usr/bin/mysqlcheck
Apr 17 08:55:48 kooka /etc/mysql/debian-start[4704]: This installation of MySQL is already upgraded to 5.0.77, use --force if you still need to run mysql_upgrade
Apr 17 08:55:48 kooka /etc/mysql/debian-start[4715]: Checking for insecure root accounts.
Apr 17 08:55:48 kooka /etc/mysql/debian-start[4719]: Triggering myisam-recover for all MyISAM tables
Apr 17 08:55:50 kooka rpc.statd[5104]: Version 1.1.5 Starting
Apr 17 08:55:50 kooka rpc.statd[5104]: unable to register (statd, 1, udp).
Apr 17 08:55:50 kooka sm-notify[5105]: Already notifying clients; Exiting!
Apr 17 08:55:50 kooka smartd[5118]: smartd version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Apr 17 08:55:50 kooka smartd[5118]: Home page is http://smartmontools.sourceforge.net/
Apr 17 08:55:50 kooka smartd[5118]: Opened configuration file /etc/smartd.conf
Apr 17 08:55:50 kooka smartd[5118]: Configuration file /etc/smartd.conf parsed.
Apr 17 08:55:50 kooka smartd[5118]: Device: /dev/disk/by-id/ata-ST3200822A_3LJ00N4L, opened
Apr 17 08:55:50 kooka smartd[5118]: Device: /dev/disk/by-id/ata-ST3200822A_3LJ00N4L, found in smartd database.
Apr 17 08:55:50 kooka smartd[5118]: Device: /dev/disk/by-id/ata-ST3200822A_3LJ00N4L, enabled SMART Attribute Autosave.
Apr 17 08:55:50 kooka smartd[5118]: Device: /dev/disk/by-id/ata-ST3200822A_3LJ00N4L, is SMART capable. Adding to "monitor" list.
Apr 17 08:55:50 kooka smartd[5118]: Device: /dev/disk/by-id/ata-WDC_WD6400AAKS-00A7B2_WD-WMASY2546840, opened
Apr 17 08:55:50 kooka smartd[5118]: Device: /dev/disk/by-id/ata-WDC_WD6400AAKS-00A7B2_WD-WMASY2546840, not found in smartd database.
Apr 17 08:55:50 kooka smartd[5118]: Device: /dev/disk/by-id/ata-WDC_WD6400AAKS-00A7B2_WD-WMASY2546840, enabled SMART Attribute Autosave.
Apr 17 08:55:51 kooka smartd[5118]: Device: /dev/disk/by-id/ata-WDC_WD6400AAKS-00A7B2_WD-WMASY2546840, is SMART capable. Adding to "monitor" list.
Apr 17 08:55:51 kooka smartd[5118]: Monitoring 2 ATA and 0 SCSI devices
Apr 17 08:55:51 kooka smartd[5120]: smartd has fork()ed into background mode. New PID=5120.
Apr 17 08:55:51 kooka smartd[5120]: file /var/run/smartd.pid written containing PID 5120
Apr 17 08:55:53 kooka xinetd[5154]: Reading included configuration file: /etc/xinetd.d/amen-stuart [file=/etc/xinetd.conf] [line=10]
Apr 17 08:55:54 kooka ntpd[5226]: ntpd 4.2.4p6@1.1549-o Wed Feb 18 18:27:25 UTC 2009 (1)
Apr 17 08:55:54 kooka ntpd[5227]: precision = 1.000 usec
Apr 17 08:55:54 kooka ntpd[5227]: Listening on interface #0 wildcard, 0.0.0.0#123 Disabled
Apr 17 08:55:54 kooka ntpd[5227]: Listening on interface #1 wildcard, ::#123 Disabled
Apr 17 08:55:54 kooka ntpd[5227]: Listening on interface #2 lo, ::1#123 Enabled
Apr 17 08:55:54 kooka ntpd[5227]: Listening on interface #3 br0, fe80::21a:4dff:fe4c:37f9#123 Enabled
Apr 17 08:55:54 kooka ntpd[5227]: Listening on interface #4 lo, 127.0.0.1#123 Enabled
Apr 17 08:55:54 kooka ntpd[5227]: Listening on interface #5 br0, 192.168.0.8#123 Enabled
Apr 17 08:55:54 kooka ntpd[5227]: kernel time sync status 0040
Apr 17 08:55:54 kooka named[4561]: network unreachable resolving 'imap.stuart.es/A/IN': 2001:6b0:7::2#53
Apr 17 09:02:59 kooka syslog-ng[4317]: syslog-ng starting up; version='2.0.9'
Apr 17 09:02:59 kooka kernel: [    0.000000] BIOS EBDA/lowmem at: 0009e800/0009e800
Apr 17 09:02:59 kooka kernel: [    0.000000] Initializing cgroup subsys cpuset
Apr 17 09:02:59 kooka kernel: [    0.000000] Initializing cgroup subsys cpu
Apr 17 09:02:59 kooka kernel: [    0.000000] Linux version 2.6.28-1-686 (Debian 2.6.28-1) (maks@debian.org) (gcc version 4.3.3 (Debian 4.3.3-4) ) #1 SMP Mon Feb 23 03:13:24 UTC 2009
Apr 17 09:02:59 kooka kernel: [    0.000000] KERNEL supported cpus:


-- Package-specific info:

-- System Information:
Debian Release: squeeze/sid
  APT prefers unstable
  APT policy: (500, 'unstable'), (500, 'testing'), (500, 'stable')
Architecture: i386 (i686)

Kernel: Linux 2.6.28-1-686 (SMP w/2 CPU cores)
Locale: LANG=en_AU.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages linux-image-2.6.29-1-686 depends on:
ii  debconf [debconf-2.0]         1.5.26     Debian configuration management sy
ii  initramfs-tools [linux-initra 0.93.2     tools for generating an initramfs
ii  module-init-tools             3.7-pre9-1 tools for managing Linux kernel mo

Versions of packages linux-image-2.6.29-1-686 recommends:
ii  libc6-i686                    2.9-7      GNU C Library: Shared libraries [i

Versions of packages linux-image-2.6.29-1-686 suggests:
ii  grub                          0.97-53    GRand Unified Bootloader (Legacy v
pn  linux-doc-2.6.29              <none>     (no description available)

-- debconf information:
  linux-image-2.6.29-1-686/preinst/elilo-initrd-2.6.29-1-686: true
  linux-image-2.6.29-1-686/postinst/depmod-error-initrd-2.6.29-1-686: false
  linux-image-2.6.29-1-686/postinst/old-system-map-link-2.6.29-1-686: true
  linux-image-2.6.29-1-686/postinst/kimage-is-a-directory:
  shared/kernel-image/really-run-bootloader: true
  linux-image-2.6.29-1-686/preinst/overwriting-modules-2.6.29-1-686: true
  linux-image-2.6.29-1-686/postinst/bootloader-test-error-2.6.29-1-686:
  linux-image-2.6.29-1-686/prerm/removing-running-kernel-2.6.29-1-686: true
  linux-image-2.6.29-1-686/preinst/lilo-has-ramdisk:
  linux-image-2.6.29-1-686/postinst/old-dir-initrd-link-2.6.29-1-686: true
  linux-image-2.6.29-1-686/preinst/lilo-initrd-2.6.29-1-686: true
  linux-image-2.6.29-1-686/preinst/abort-overwrite-2.6.29-1-686:
  linux-image-2.6.29-1-686/preinst/bootloader-initrd-2.6.29-1-686: true
  linux-image-2.6.29-1-686/preinst/initrd-2.6.29-1-686:
  linux-image-2.6.29-1-686/postinst/depmod-error-2.6.29-1-686: false
  linux-image-2.6.29-1-686/postinst/bootloader-error-2.6.29-1-686:
  linux-image-2.6.29-1-686/preinst/failed-to-move-modules-2.6.29-1-686:
  linux-image-2.6.29-1-686/postinst/create-kimage-link-2.6.29-1-686: true
  linux-image-2.6.29-1-686/prerm/would-invalidate-boot-loader-2.6.29-1-686: true
  linux-image-2.6.29-1-686/preinst/abort-install-2.6.29-1-686:
  linux-image-2.6.29-1-686/postinst/old-initrd-link-2.6.29-1-686: true

--- End Message ---

--- Begin Message ---

To: Stuart Pook <debian47@pook.es>

Cc: 524442-done@bugs.debian.org

Subject: Re: Bug#515258: hal hangs with 2.6.29-rc5

From: Moritz Muehlenhoff <jmm@inutil.org>

Date: Thu, 23 Jul 2009 21:49:26 +0200

Message-id: <20090723194926.GA15272@galadriel.inutil.org>

In-reply-to: <49EB116A.2060301@pook.es>

References: <20090215114945.5423.54465.reportbug@kooka> <handler.515258.B.123469859524554.ack@bugs.debian.org> <49980E6A.5000409@pook.es> <49E8D36E.4080602@debian.org> <49EB116A.2060301@pook.es>
Version: 2.6.30-1

On Sun, Apr 19, 2009 at 01:56:26PM +0200, Stuart Pook wrote:
> This problem seems to have been solved in the kernel 2.6.30-rc2.
> When using this kernel hald starts without any problems.

Thanks, closing the bug, then.

Cheers,
        Moritz
--- End Message ---

Reply to:

Prev by Date: Bug#377753: marked as done (linux-image-2.6.17-1-686: pcmcia bridge detected, cards are not)
Next by Date: Bug#393894: marked as done ([sparc] CD-ROM support broken in esp driver)
Previous by thread: Bug#377753: marked as done (linux-image-2.6.17-1-686: pcmcia bridge detected, cards are not)
Next by thread: Bug#393894: marked as done ([sparc] CD-ROM support broken in esp driver)
Index(es):
- Date
- Thread