--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: RTC device not working on ThinkPad T61
- From: "Joe Nahmias" <joe@nahmias.net>
- Date: Wed, 04 Jul 2007 00:12:21 -0400
- Message-id: <20070704041221.4845.74836.reportbug@wakko.nahmias.net>
Package: linux-image-2.6.21-2-686
Version: 2.6.21-5
Severity: normal
Hello,
It seems the the real-time clock device [/dev/rtc] does not work on my
ThinkPad T61:
joe@wakko:~$ sudo hwclock --show
select() to /dev/rtc to wait for clock tick timed out
I am currently working around this problem by using --directisa. For
example, I have added the line "HWCLOCKPARS=--directisa" to
/etc/default/rcS.
Let me know if there's any additional info you need.
Thanks,
--Joe
-- Package-specific info:
** Version: Linux version 2.6.21-2-686 (Debian 2.6.21-5) (waldi@debian.org) (gcc version 4.1.3 20070601 (prerelease) (Debian 4.1.2-12)) #1 SMP Mon Jun 25 20:53:36 UTC 2007
** Not tainted
** Kernel log:
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 524280k swap on /dev/mapper/diskvg-swap. Priority:-1 extents:1 across:524280k
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): eth0: link is not ready
ACPI: Battery Slot [BAT0] (battery present)
ACPI: AC Adapter [AC] (off-line)
input: Power Button (FF) as /class/input/input3
ACPI: Power Button (FF) [PWRF]
input: Lid Switch as /class/input/input4
ACPI: Lid Switch [LID]
input: Sleep Button (CM) as /class/input/input5
ACPI: Sleep Button (CM) [SLPB]
Non-volatile memory driver v1.2
Bluetooth: Core ver 2.11
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
e1000: eth0: e1000_watchdog: 10/100 speed: disabling TSO
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
ADDRCONF(NETDEV_UP): eth0: link is not ready
e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
e1000: eth0: e1000_watchdog: 10/100 speed: disabling TSO
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present
e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
e1000: eth0: e1000_watchdog: 10/100 speed: disabling TSO
ADDRCONF(NETDEV_UP): eth0: link is not ready
e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
e1000: eth0: e1000_watchdog: 10/100 speed: disabling TSO
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present
ata1.00: exception Emask 0x2 SAct 0x7000007f SErr 0x0 action 0x2 frozen
ata1.00: (spurious completions during NCQ issue=0x0 SAct=0x7000007f FIS=005040a1:08000000)
ata1.00: cmd 61/08:00:a3:08:ab/00:00:0f:00:00/40 tag 0 cdb 0x0 data 4096 out
res 50/00:10:db:45:03/00:00:10:00:00/40 Emask 0x2 (HSM violation)
ata1.00: cmd 61/10:08:cb:45:ab/00:00:0f:00:00/40 tag 1 cdb 0x0 data 8192 out
res 50/00:10:db:45:03/00:00:10:00:00/40 Emask 0x2 (HSM violation)
ata1.00: cmd 61/08:10:eb:45:ab/00:00:0f:00:00/40 tag 2 cdb 0x0 data 4096 out
res 50/00:10:db:45:03/00:00:10:00:00/40 Emask 0x2 (HSM violation)
ata1.00: cmd 61/08:18:43:46:ab/00:00:0f:00:00/40 tag 3 cdb 0x0 data 4096 out
res 50/00:10:db:45:03/00:00:10:00:00/40 Emask 0x2 (HSM violation)
ata1.00: cmd 61/08:20:e3:46:ab/00:00:0f:00:00/40 tag 4 cdb 0x0 data 4096 out
res 50/00:10:db:45:03/00:00:10:00:00/40 Emask 0x2 (HSM violation)
ata1.00: cmd 61/08:28:cb:45:03/00:00:10:00:00/40 tag 5 cdb 0x0 data 4096 out
res 50/00:10:db:45:03/00:00:10:00:00/40 Emask 0x2 (HSM violation)
ata1.00: cmd 61/10:30:db:45:03/00:00:10:00:00/40 tag 6 cdb 0x0 data 8192 out
res 50/00:10:db:45:03/00:00:10:00:00/40 Emask 0x2 (HSM violation)
ata1.00: cmd 61/08:e0:5b:08:ab/00:00:0f:00:00/40 tag 28 cdb 0x0 data 4096 out
res 50/00:10:db:45:03/00:00:10:00:00/40 Emask 0x2 (HSM violation)
ata1.00: cmd 61/10:e8:7b:08:ab/00:00:0f:00:00/40 tag 29 cdb 0x0 data 8192 out
res 50/00:10:db:45:03/00:00:10:00:00/40 Emask 0x2 (HSM violation)
ata1.00: cmd 61/08:f0:93:08:ab/00:00:0f:00:00/40 tag 30 cdb 0x0 data 4096 out
res 50/00:10:db:45:03/00:00:10:00:00/40 Emask 0x2 (HSM violation)
ata1: soft resetting port
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: configured for UDMA/100
ata1: EH complete
SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ADDRCONF(NETDEV_UP): eth0: link is not ready
e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
e1000: eth0: e1000_watchdog: 10/100 speed: disabling TSO
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
ADDRCONF(NETDEV_UP): eth0: link is not ready
e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
e1000: eth0: e1000_watchdog: 10/100 speed: disabling TSO
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present
ata1.00: exception Emask 0x2 SAct 0x9210000 SErr 0x0 action 0x2 frozen
ata1.00: (spurious completions during NCQ issue=0x0 SAct=0x9210000 FIS=005040a1:00020000)
ata1.00: cmd 61/08:80:93:53:66/00:00:0f:00:00/40 tag 16 cdb 0x0 data 4096 out
res 50/00:08:03:56:66/00:00:0f:00:00/40 Emask 0x2 (HSM violation)
ata1.00: cmd 61/08:a8:b3:55:66/00:00:0f:00:00/40 tag 21 cdb 0x0 data 4096 out
res 50/00:08:03:56:66/00:00:0f:00:00/40 Emask 0x2 (HSM violation)
ata1.00: cmd 61/08:c0:d3:55:66/00:00:0f:00:00/40 tag 24 cdb 0x0 data 4096 out
res 50/00:08:03:56:66/00:00:0f:00:00/40 Emask 0x2 (HSM violation)
ata1.00: cmd 61/08:d8:03:56:66/00:00:0f:00:00/40 tag 27 cdb 0x0 data 4096 out
res 50/00:08:03:56:66/00:00:0f:00:00/40 Emask 0x2 (HSM violation)
ata1: soft resetting port
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: configured for UDMA/100
ata1: EH complete
SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
** Loaded modules:
Module Size Used by
binfmt_misc 10984 1
rfcomm 35480 0
l2cap 22208 5 rfcomm
bluetooth 48676 4 rfcomm,l2cap
nvram 8488 0
uinput 8768 0
button 7952 0
ac 5220 0
battery 10020 0
ipv6 236256 12
acpi_cpufreq 8680 1
cpufreq_ondemand 7884 1
cpufreq_powersave 1792 0
cpufreq_conservative 6888 0
cpufreq_userspace 4128 0
cpufreq_stats 5120 0
freq_table 4512 3 acpi_cpufreq,cpufreq_ondemand,cpufreq_stats
sbp2 21188 0
loop 15880 0
tsdev 7520 0
snd_hda_intel 20312 0
serio_raw 6564 0
pcmcia 35276 0
firmware_class 9408 1 pcmcia
snd_hda_codec 198336 1 snd_hda_intel
psmouse 34952 0
intel_agp 23004 1
snd_pcm_oss 39168 0
snd_mixer_oss 15328 1 snd_pcm_oss
agpgart 32168 1 intel_agp
yenta_socket 24876 1
rsrc_nonstatic 11968 1 yenta_socket
pcmcia_core 36884 3 pcmcia,yenta_socket,rsrc_nonstatic
rtc 12760 0
pcspkr 3136 0
snd_pcm 71940 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_timer 20868 1 snd_pcm
i2c_i801 8560 0
i2c_core 20480 1 i2c_i801
snd 48132 6 snd_hda_intel,snd_hda_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
soundcore 7424 1 snd
snd_page_alloc 9512 2 snd_hda_intel,snd_pcm
evdev 9216 4
eth1394 18276 0
ext3 120904 7
jbd 55208 1 ext3
mbcache 8164 1 ext3
dm_mirror 20116 0
dm_snapshot 16420 0
dm_mod 52556 17 dm_mirror,dm_snapshot
ide_cd 36512 0
cdrom 32768 1 ide_cd
sd_mod 19904 3
piix 9508 0 [permanent]
generic 4804 0 [permanent]
ide_core 115016 3 ide_cd,piix,generic
ahci 20068 2
ata_generic 8100 0
libata 109172 2 ahci,ata_generic
scsi_mod 133740 3 sbp2,sd_mod,libata
ohci1394 32432 0
ieee1394 89560 3 sbp2,eth1394,ohci1394
e1000 113408 0
ehci_hcd 30796 0
uhci_hcd 22608 0
usbcore 123272 3 ehci_hcd,uhci_hcd
thermal 14120 0
processor 30888 2 acpi_cpufreq,thermal
fan 4868 0
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile Memory Controller Hub [8086:2a00] (rev 0c)
Subsystem: Lenovo Unknown device [17aa:20b3]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Capabilities: <access denied>
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile Integrated Graphics Controller [8086:2a02] (rev 0c) (prog-if 00 [VGA])
Subsystem: Lenovo Unknown device [17aa:20b5]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 10
Region 0: Memory at f8100000 (64-bit, non-prefetchable) [size=1M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 1800 [size=8]
Capabilities: <access denied>
00:02.1 Display controller [0380]: Intel Corporation Mobile Integrated Graphics Controller [8086:2a03] (rev 0c)
Subsystem: Lenovo Unknown device [17aa:20b5]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Region 0: Memory at f8200000 (64-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>
00:19.0 Ethernet controller [0200]: Intel Corporation 82566MM Gigabit Network Connection [8086:1049] (rev 03)
Subsystem: Lenovo Unknown device [17aa:20b9]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 217
Region 0: Memory at fe000000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at fe025000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at 1840 [size=32]
Capabilities: <access denied>
00:1a.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI #4 [8086:2834] (rev 03) (prog-if 00 [UHCI])
Subsystem: Lenovo Unknown device [17aa:20aa]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at 1860 [size=32]
00:1a.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI #5 [8086:2835] (rev 03) (prog-if 00 [UHCI])
Subsystem: Lenovo Unknown device [17aa:20aa]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at 1880 [size=32]
00:1a.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI #2 [8086:283a] (rev 03) (prog-if 20 [EHCI])
Subsystem: Lenovo Unknown device [17aa:20ab]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fe226c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 03)
Subsystem: Lenovo Unknown device [17aa:20ac]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 21
Region 0: Memory at fe020000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: fc000000-fdffffff
Prefetchable memory behind bridge: 00000000f8000000-00000000f80fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: <access denied>
00:1c.1 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 [8086:2841] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: dc000000-df3fffff
Prefetchable memory behind bridge: 00000000dfe00000-00000000dfefffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: <access denied>
00:1c.2 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 [8086:2843] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: d8000000-d9ffffff
Prefetchable memory behind bridge: 00000000dfb00000-00000000dfbfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: <access denied>
00:1c.3 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 [8086:2845] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=05, subordinate=0c, sec-latency=0
I/O behind bridge: 00005000-00005fff
Memory behind bridge: d4000000-d5ffffff
Prefetchable memory behind bridge: 00000000df800000-00000000df8fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: <access denied>
00:1c.4 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 [8086:2847] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0d, subordinate=14, sec-latency=0
I/O behind bridge: 00006000-00006fff
Memory behind bridge: d0000000-d1ffffff
Prefetchable memory behind bridge: 00000000df500000-00000000df5fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: <access denied>
00:1d.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI #1 [8086:2830] (rev 03) (prog-if 00 [UHCI])
Subsystem: Lenovo Unknown device [17aa:20aa]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at 18a0 [size=32]
00:1d.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI #2 [8086:2831] (rev 03) (prog-if 00 [UHCI])
Subsystem: Lenovo Unknown device [17aa:20aa]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 18c0 [size=32]
00:1d.2 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI #3 [8086:2832] (rev 03) (prog-if 00 [UHCI])
Subsystem: Lenovo Unknown device [17aa:20aa]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 4: I/O ports at 18e0 [size=32]
00:1d.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI #1 [8086:2836] (rev 03) (prog-if 20 [EHCI])
Subsystem: Lenovo Unknown device [17aa:20ab]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin D routed to IRQ 23
Region 0: Memory at fe227000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev f3) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=15, subordinate=18, sec-latency=32
I/O behind bridge: 00007000-0000afff
Memory behind bridge: f8300000-fbffffff
Prefetchable memory behind bridge: 00000000f4000000-00000000f7ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation Mobile LPC Interface Controller [8086:2811] (rev 03)
Subsystem: Lenovo Unknown device [17aa:20b6]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: <access denied>
00:1f.1 IDE interface [0101]: Intel Corporation Mobile IDE Controller [8086:2850] (rev 03) (prog-if 8a [Master SecP PriP])
Subsystem: Lenovo Unknown device [17aa:20a6]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 20
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 1c00 [size=16]
00:1f.2 SATA controller [0106]: Intel Corporation Mobile SATA AHCI Controller [8086:2829] (rev 03) (prog-if 01 [AHCI 1.0])
Subsystem: Lenovo Unknown device [17aa:20a7]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 218
Region 0: I/O ports at 1c50 [size=8]
Region 1: I/O ports at 1c44 [size=4]
Region 2: I/O ports at 1c48 [size=8]
Region 3: I/O ports at 1c40 [size=4]
Region 4: I/O ports at 1c20 [size=32]
Region 5: Memory at fe226000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] (rev 03)
Subsystem: Lenovo Unknown device [17aa:20a9]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 19
Region 0: Memory at fe227400 (32-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 1c60 [size=32]
03:00.0 Ethernet controller [0200]: Atheros Communications, Inc. AR5212 802.11abg NIC [168c:1014] (rev 01)
Subsystem: IBM ThinkPad 11a/b/g Wireless LAN Mini Express Adapter (AR5BXB6) [1014:058a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at df3f0000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
15:00.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev ba)
Subsystem: Lenovo Unknown device [17aa:20c6]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 168
Interrupt: pin A routed to IRQ 20
Region 0: Memory at f8300000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=15, secondary=16, subordinate=17, sec-latency=176
Memory window 0: f4000000-f7fff000 (prefetchable)
Memory window 1: 80000000-83fff000
I/O window 0: 00007000-000070ff
I/O window 1: 00007400-000074ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
15:00.1 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd Unknown device [1180:0832] (rev 04) (prog-if 10 [OHCI])
Subsystem: Lenovo Unknown device [17aa:20c7]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (500ns min, 1000ns max)
Interrupt: pin B routed to IRQ 21
Region 0: Memory at f8301000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
-- System Information:
Debian Release: lenny/sid
APT prefers unstable
APT policy: (990, 'unstable'), (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 2.6.21-2-686 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.21-2-686 depends on:
ii initramfs-tools [linux-initr 0.88 tools for generating an initramfs
ii module-init-tools 3.3-pre11-3 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.21-2-686 recommends:
ii libc6-i686 2.5-11 GNU C Library: Shared libraries [i
-- debconf information:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.21-2-686/preinst/elilo-initrd-2.6.21-2-686: true
linux-image-2.6.21-2-686/preinst/lilo-has-ramdisk:
linux-image-2.6.21-2-686/prerm/would-invalidate-boot-loader-2.6.21-2-686: true
linux-image-2.6.21-2-686/preinst/already-running-this-2.6.21-2-686:
linux-image-2.6.21-2-686/postinst/old-initrd-link-2.6.21-2-686: true
linux-image-2.6.21-2-686/postinst/bootloader-error-2.6.21-2-686:
linux-image-2.6.21-2-686/preinst/lilo-initrd-2.6.21-2-686: true
linux-image-2.6.21-2-686/postinst/depmod-error-initrd-2.6.21-2-686: false
linux-image-2.6.21-2-686/preinst/bootloader-initrd-2.6.21-2-686: true
linux-image-2.6.21-2-686/postinst/bootloader-test-error-2.6.21-2-686:
linux-image-2.6.21-2-686/postinst/old-dir-initrd-link-2.6.21-2-686: true
linux-image-2.6.21-2-686/prerm/removing-running-kernel-2.6.21-2-686: true
linux-image-2.6.21-2-686/postinst/kimage-is-a-directory:
linux-image-2.6.21-2-686/preinst/failed-to-move-modules-2.6.21-2-686:
linux-image-2.6.21-2-686/preinst/abort-overwrite-2.6.21-2-686:
linux-image-2.6.21-2-686/preinst/initrd-2.6.21-2-686:
linux-image-2.6.21-2-686/preinst/overwriting-modules-2.6.21-2-686: true
linux-image-2.6.21-2-686/postinst/create-kimage-link-2.6.21-2-686: true
linux-image-2.6.21-2-686/postinst/depmod-error-2.6.21-2-686: false
linux-image-2.6.21-2-686/postinst/old-system-map-link-2.6.21-2-686: true
linux-image-2.6.21-2-686/preinst/abort-install-2.6.21-2-686:
--- End Message ---