Your message dated Thu, 9 Jul 2009 00:43:21 -0700 with message-id <20090709074321.GA22208@dario.dodds.net> and subject line Re: Bug#536324: [linux-image-2.6.30-1] hard disk numbering is partially changed from IDE to SATA has caused the Debian Bug report #536324, regarding [linux-image-2.6.30-1] hard disk numbering is partially changed from IDE to SATA to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@bugs.debian.org immediately.) -- 536324: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=536324 Debian Bug Tracking System Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: submit@bugs.debian.org
- Subject: [linux-image-2.6.30-1] hard disk numbering is partially changed from IDE to SATA
- From: Karl Ferdinand Ebert <kfebert@gmail.com>
- Date: Thu, 9 Jul 2009 07:58:20 +0200
- Message-id: <[🔎] 200907090758.24728.kfebert@gmail.com>
Package: linux-image-2.6.30-1 Severity: grave --- Please enter the report below this line. --- A system I manage has three disks (1x SATA, 2x IDE) under the old kernel 2.6.29 this has been: sda,hda and hdb (details in appendix). But with the 2.6.30 kernel this changes wrongily to 3 SATA devices and no partioning scheme is temporily lost (unless I start with the old kernel). Therefore I cannot access my data. Moreover while booting amixer prints enormously often its help page, I interpret this a some wrong parameter (of a device number) when taking the 2.6.30 kernel. --- System information. --- Architecture: amd64 Kernel: Linux 2.6.29-2-amd64 Debian Release: squeeze/sid 990 testing www.debian-multimedia.org 990 testing security.debian.org 990 testing ftp.de.debian.org 990 testing deb.opera.com 500 unstable ftp.de.debian.org 500 stable exp1.fkp.physik.tu-darmstadt.de --- Package information. --- Package's Depends field is empty. Package's Recommends field is empty. Package's Suggests field is empty.[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.29-2-amd64 (Debian 2.6.29-5) (waldi@debian.org) (gcc version 4.3.3 (Debian 4.3.3-10) ) #1 SMP Sun May 17 17:15:47 UTC 2009 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.29-2-amd64 root=/dev/mapper/vonNeumann-root ro vga=0x31a selinux=0 enforcing=0 quiet [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000af790000 (usable) [ 0.000000] BIOS-e820: 00000000af790000 - 00000000af79e000 (ACPI data) [ 0.000000] BIOS-e820: 00000000af79e000 - 00000000af7e0000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000af7e0000 - 00000000af800000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.4 present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] last_pfn = 0xaf790 max_arch_pfn = 0x100000000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000af790000 [ 0.000000] 0000000000 - 00af600000 page 2M [ 0.000000] 00af600000 - 00af790000 page 4k [ 0.000000] kernel direct mapping tables up to af790000 @ 10000-15000 [ 0.000000] last_map_addr: af790000 end: af790000 [ 0.000000] RAMDISK: 376d1000 - 37fef6b4 [ 0.000000] ACPI: RSDP 000FA950, 0014 (r0 ACPIAM) [ 0.000000] ACPI: RSDT AF790000, 0040 (r1 MSTEST TESTONLY 5000805 MSFT 97) [ 0.000000] ACPI: FACP AF790200, 0084 (r2 MSTEST OEMFACP 5000805 MSFT 97) [ 0.000000] FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4) [ 0.000000] ACPI: DSDT AF7905C0, 7C09 (r1 A0518 A0518000 0 INTL 20060113) [ 0.000000] ACPI: FACS AF79E000, 0040 [ 0.000000] ACPI: APIC AF790390, 006C (r1 MSTEST OEMAPIC 5000805 MSFT 97) [ 0.000000] ACPI: MCFG AF790400, 003C (r1 MSTEST OEMMCFG 5000805 MSFT 97) [ 0.000000] ACPI: OEMB AF79E040, 007B (r1 MSTEST AMI_OEM 5000805 MSFT 97) [ 0.000000] ACPI: HPET AF7981D0, 0038 (r1 MSTEST OEMHPET 5000805 MSFT 97) [ 0.000000] ACPI: ASF! AF798208, 0099 (r32 LEGEND I865PASF 1 INTL 20060113) [ 0.000000] ACPI: GSCI AF79E0C0, 2024 (r1 MSTEST GMCHSCI 5000805 MSFT 97) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-00000000af790000 [ 0.000000] Bootmem setup node 0 0000000000000000-00000000af790000 [ 0.000000] NODE_DATA [0000000000013000 - 000000000001afff] [ 0.000000] bootmap [000000000001b000 - 0000000000030ef7] pages 16 [ 0.000000] (6 early reservations) ==> bootmem [0000000000 - 00af790000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0000200000 - 00007ef74c] TEXT DATA BSS ==> [0000200000 - 00007ef74c] [ 0.000000] #3 [00376d1000 - 0037fef6b4] RAMDISK ==> [00376d1000 - 0037fef6b4] [ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #5 [0000010000 - 0000013000] PGTABLE ==> [0000010000 - 0000013000] [ 0.000000] found SMP MP-table at [ffff8800000ff780] 000ff780 [ 0.000000] [ffffe20000000000-ffffe200027fffff] PMD -> [ffff880001200000-ffff8800039fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00100000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000af790 [ 0.000000] On node 0 totalpages: 718623 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1623 pages reserved [ 0.000000] DMA zone: 2304 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 9771 pages used for memmap [ 0.000000] DMA32 zone: 704869 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a202 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000 [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at b0000000 (gap: af800000:4f600000) [ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Allocating 53248 bytes of per cpu data [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 707173 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.29-2-amd64 root=/dev/mapper/vonNeumann-root ro vga=0x31a selinux=0 enforcing=0 quiet [ 0.000000] Initializing CPU#0 [ 0.000000] Experimental hierarchical RCU implementation. [ 0.000000] Experimental hierarchical RCU init done. [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1866.788 MHz processor. [ 0.004000] Console: colour dummy device 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Checking aperture... [ 0.004000] No AGP bridge found [ 0.004000] Calgary: detecting Calgary via BIOS EBDA area [ 0.004000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.004000] Memory: 2817676k/2874944k available (2547k kernel code, 452k absent, 56816k reserved, 1323k data, 552k init) [ 0.004000] hpet clockevent registered [ 0.004000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3733.57 BogoMIPS (lpj=7467152) [ 0.004000] Security Framework initialized [ 0.004000] SELinux: Disabled at boot. [ 0.004000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.004000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.005007] Mount-cache hash table entries: 256 [ 0.005226] Initializing cgroup subsys ns [ 0.005230] Initializing cgroup subsys cpuacct [ 0.005233] Initializing cgroup subsys devices [ 0.005236] Initializing cgroup subsys freezer [ 0.005238] Initializing cgroup subsys net_cls [ 0.005277] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.005279] CPU: L2 cache: 2048K [ 0.005282] CPU 0/0x0 -> Node 0 [ 0.005284] CPU: Physical Processor ID: 0 [ 0.005285] CPU: Processor Core ID: 0 [ 0.005294] CPU0: Thermal monitoring enabled (TM2) [ 0.005296] using mwait in idle threads. [ 0.007622] ACPI: Core revision 20081204 [ 0.020055] Setting APIC routing to flat [ 0.020379] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.060997] CPU0: Intel(R) Core(TM)2 CPU 6300 @ 1.86GHz stepping 06 [ 0.064001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.004000] Initializing CPU#1 [ 0.004000] Calibrating delay using timer specific routine.. 3733.31 BogoMIPS (lpj=7466621) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 2048K [ 0.004000] CPU 1/0x1 -> Node 0 [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 1 [ 0.004000] CPU1: Thermal monitoring enabled (TM2) [ 0.152451] CPU1: Intel(R) Core(TM)2 CPU 6300 @ 1.86GHz stepping 06 [ 0.152475] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.156048] Brought up 2 CPUs [ 0.156050] Total of 2 processors activated (7466.88 BogoMIPS). [ 0.156112] CPU0 attaching sched-domain: [ 0.156115] domain 0: span 0-1 level MC [ 0.156117] groups: 0 1 [ 0.156122] CPU1 attaching sched-domain: [ 0.156124] domain 0: span 0-1 level MC [ 0.156126] groups: 1 0 [ 0.156191] net_namespace: 1888 bytes [ 0.156191] Booting paravirtualized kernel on bare hardware [ 0.156191] regulator: core version 0.5 [ 0.156192] NET: Registered protocol family 16 [ 0.156192] ACPI: bus type pci registered [ 0.156192] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.156192] PCI: Not using MMCONFIG. [ 0.156192] PCI: Using configuration type 1 for base access [ 0.156192] bio: create slab <bio-0> at 0 [ 0.160524] ACPI: EC: Look up EC in DSDT [ 0.172544] ACPI: Interpreter enabled [ 0.172548] ACPI: (supports S0 S1 S3 S4 S5) [ 0.172579] ACPI: Using IOAPIC for interrupt routing [ 0.172648] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.177277] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources [ 0.187199] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.197898] ACPI: No dock devices found. [ 0.197898] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.197898] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.197898] pci 0000:00:01.0: PME# disabled [ 0.197898] pci 0000:00:02.0: reg 10 32bit mmio: [0xffa00000-0xffafffff] [ 0.197898] pci 0000:00:02.0: reg 18 64bit mmio: [0xd0000000-0xdfffffff] [ 0.197898] pci 0000:00:02.0: reg 20 io port: [0xec00-0xec07] [ 0.197898] pci 0000:00:1a.0: reg 20 io port: [0xd880-0xd89f] [ 0.200042] pci 0000:00:1a.1: reg 20 io port: [0xdc00-0xdc1f] [ 0.200082] pci 0000:00:1a.7: reg 10 32bit mmio: [0xff9fb800-0xff9fbbff] [ 0.200142] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.200146] pci 0000:00:1a.7: PME# disabled [ 0.200176] pci 0000:00:1b.0: reg 10 64bit mmio: [0xff9f4000-0xff9f7fff] [ 0.200222] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.200225] pci 0000:00:1b.0: PME# disabled [ 0.200278] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.200281] pci 0000:00:1c.0: PME# disabled [ 0.200338] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.200342] pci 0000:00:1c.4: PME# disabled [ 0.200396] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.200400] pci 0000:00:1c.5: PME# disabled [ 0.200439] pci 0000:00:1d.0: reg 20 io port: [0xd400-0xd41f] [ 0.200484] pci 0000:00:1d.1: reg 20 io port: [0xd480-0xd49f] [ 0.200530] pci 0000:00:1d.2: reg 20 io port: [0xd800-0xd81f] [ 0.200570] pci 0000:00:1d.7: reg 10 32bit mmio: [0xff9fb400-0xff9fb7ff] [ 0.200630] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.200634] pci 0000:00:1d.7: PME# disabled [ 0.200744] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO [ 0.200748] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO [ 0.200751] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003) [ 0.200792] pci 0000:00:1f.2: reg 10 io port: [0xe880-0xe887] [ 0.200797] pci 0000:00:1f.2: reg 14 io port: [0xe800-0xe803] [ 0.200803] pci 0000:00:1f.2: reg 18 io port: [0xe480-0xe487] [ 0.200808] pci 0000:00:1f.2: reg 1c io port: [0xe400-0xe403] [ 0.200813] pci 0000:00:1f.2: reg 20 io port: [0xe080-0xe08f] [ 0.200818] pci 0000:00:1f.2: reg 24 io port: [0xe000-0xe00f] [ 0.200844] pci 0000:00:1f.2: PME# supported from D3hot [ 0.200847] pci 0000:00:1f.2: PME# disabled [ 0.200863] pci 0000:00:1f.3: reg 10 32bit mmio: [0x000000-0x0000ff] [ 0.200879] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f] [ 0.200910] pci 0000:00:1f.5: reg 10 io port: [0xd080-0xd087] [ 0.200916] pci 0000:00:1f.5: reg 14 io port: [0xd000-0xd003] [ 0.200921] pci 0000:00:1f.5: reg 18 io port: [0xcc00-0xcc07] [ 0.200926] pci 0000:00:1f.5: reg 1c io port: [0xc880-0xc883] [ 0.200932] pci 0000:00:1f.5: reg 20 io port: [0xc800-0xc80f] [ 0.200937] pci 0000:00:1f.5: reg 24 io port: [0xc480-0xc48f] [ 0.200962] pci 0000:00:1f.5: PME# supported from D3hot [ 0.200966] pci 0000:00:1f.5: PME# disabled [ 0.201007] pci 0000:00:01.0: bridge 64bit mmio pref: [0xbfd00000-0xbfdfffff] [ 0.201048] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xbfe00000-0xbfefffff] [ 0.201124] pci 0000:03:00.0: reg 24 32bit mmio: [0xff6fe000-0xff6fffff] [ 0.201133] pci 0000:03:00.0: reg 30 32bit mmio: [0xff6e0000-0xff6effff] [ 0.201173] pci 0000:03:00.0: PME# supported from D3hot [ 0.201178] pci 0000:03:00.0: PME# disabled [ 0.201216] pci 0000:03:00.1: reg 10 io port: [0xac00-0xac07] [ 0.201224] pci 0000:03:00.1: reg 14 io port: [0xa880-0xa883] [ 0.201233] pci 0000:03:00.1: reg 18 io port: [0xa800-0xa807] [ 0.201241] pci 0000:03:00.1: reg 1c io port: [0xa480-0xa483] [ 0.201250] pci 0000:03:00.1: reg 20 io port: [0xa400-0xa40f] [ 0.201347] pci 0000:00:1c.4: bridge io port: [0xa000-0xafff] [ 0.201351] pci 0000:00:1c.4: bridge 32bit mmio: [0xff600000-0xff6fffff] [ 0.201394] pci 0000:02:00.0: reg 10 io port: [0x9800-0x98ff] [ 0.201415] pci 0000:02:00.0: reg 18 64bit mmio: [0xff5ff000-0xff5fffff] [ 0.201436] pci 0000:02:00.0: reg 30 32bit mmio: [0xff5c0000-0xff5dffff] [ 0.201497] pci 0000:02:00.0: supports D1 D2 [ 0.201499] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.201504] pci 0000:02:00.0: PME# disabled [ 0.201547] pci 0000:00:1c.5: bridge io port: [0x9000-0x9fff] [ 0.201551] pci 0000:00:1c.5: bridge 32bit mmio: [0xff500000-0xff5fffff] [ 0.201580] pci 0000:05:01.0: reg 10 32bit mmio: [0xff7ff800-0xff7fffff] [ 0.201587] pci 0000:05:01.0: reg 14 32bit mmio: [0xff7f8000-0xff7fbfff] [ 0.201637] pci 0000:05:01.0: supports D1 D2 [ 0.201639] pci 0000:05:01.0: PME# supported from D0 D1 D2 D3hot [ 0.201643] pci 0000:05:01.0: PME# disabled [ 0.201667] pci 0000:05:03.0: reg 10 io port: [0xb800-0xb8ff] [ 0.201674] pci 0000:05:03.0: reg 14 32bit mmio: [0xff7ff400-0xff7ff4ff] [ 0.201723] pci 0000:05:03.0: supports D1 D2 [ 0.201725] pci 0000:05:03.0: PME# supported from D1 D2 D3hot D3cold [ 0.201729] pci 0000:05:03.0: PME# disabled [ 0.201767] pci 0000:00:1e.0: transparent bridge [ 0.201771] pci 0000:00:1e.0: bridge io port: [0xb000-0xbfff] [ 0.201774] pci 0000:00:1e.0: bridge 32bit mmio: [0xff700000-0xff7fffff] [ 0.201802] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.202018] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] [ 0.202098] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.202225] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT] [ 0.202309] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT] [ 0.202401] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] [ 0.224122] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.224282] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.224440] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.224597] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 *15) [ 0.224753] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.224910] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.225067] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.225226] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 *14 15) [ 0.225296] ACPI Warning (tbutils-0242): Incorrect checksum in table [OEMB] - 5C, should be 4F [20081204] [ 0.225296] usbcore: registered new interface driver usbfs [ 0.225296] usbcore: registered new interface driver hub [ 0.225296] usbcore: registered new device driver usb [ 0.225296] PCI: Using ACPI for IRQ routing [ 0.232038] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.232043] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.244047] pnp: PnP ACPI init [ 0.244057] ACPI: bus type pnp registered [ 0.246812] pnp 00:09: mem resource (0xffafe000-0xffafefff) overlaps 0000:00:02.0 BAR 0 (0xffa00000-0xffafffff), disabling [ 0.249893] pnp: PnP ACPI: found 15 devices [ 0.249896] ACPI: ACPI bus type pnp unregistered [ 0.249906] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved [ 0.249914] system 00:08: ioport range 0x290-0x297 has been reserved [ 0.249920] system 00:09: ioport range 0x4d0-0x4d1 has been reserved [ 0.249923] system 00:09: ioport range 0x800-0x87f has been reserved [ 0.249926] system 00:09: ioport range 0x480-0x4bf has been reserved [ 0.249929] system 00:09: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 0.249932] system 00:09: iomem range 0xfed20000-0xfed8ffff has been reserved [ 0.249935] system 00:09: iomem range 0xff9fa000-0xff9fafff has been reserved [ 0.249938] system 00:09: iomem range 0xfff00000-0xfffffffe has been reserved [ 0.249941] system 00:09: iomem range 0xfebfe000-0xfebfefff has been reserved [ 0.249947] system 00:0c: iomem range 0xfec00000-0xfec00fff has been reserved [ 0.249950] system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.249955] system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved [ 0.249963] system 00:0e: iomem range 0x0-0x9ffff could not be reserved [ 0.249966] system 00:0e: iomem range 0xc0000-0xcffff has been reserved [ 0.249968] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved [ 0.249971] system 00:0e: iomem range 0x100000-0xaf7fffff could not be reserved [ 0.254974] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.254976] pci 0000:00:01.0: IO window: disabled [ 0.254980] pci 0000:00:01.0: MEM window: disabled [ 0.254983] pci 0000:00:01.0: PREFETCH window: 0x000000bfd00000-0x000000bfdfffff [ 0.254988] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:04 [ 0.254989] pci 0000:00:1c.0: IO window: disabled [ 0.254993] pci 0000:00:1c.0: MEM window: disabled [ 0.254997] pci 0000:00:1c.0: PREFETCH window: 0x000000bfe00000-0x000000bfefffff [ 0.255003] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:03 [ 0.255006] pci 0000:00:1c.4: IO window: 0xa000-0xafff [ 0.255011] pci 0000:00:1c.4: MEM window: 0xff600000-0xff6fffff [ 0.255014] pci 0000:00:1c.4: PREFETCH window: disabled [ 0.255020] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:02 [ 0.255023] pci 0000:00:1c.5: IO window: 0x9000-0x9fff [ 0.255027] pci 0000:00:1c.5: MEM window: 0xff500000-0xff5fffff [ 0.255031] pci 0000:00:1c.5: PREFETCH window: disabled [ 0.255036] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05 [ 0.255039] pci 0000:00:1e.0: IO window: 0xb000-0xbfff [ 0.255044] pci 0000:00:1e.0: MEM window: 0xff700000-0xff7fffff [ 0.255048] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.255059] alloc irq_desc for 16 on cpu 0 node 0 [ 0.255062] alloc kstat_irqs on cpu 0 node 0 [ 0.255067] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.255071] pci 0000:00:01.0: setting latency timer to 64 [ 0.255077] alloc irq_desc for 17 on cpu 0 node 0 [ 0.255079] alloc kstat_irqs on cpu 0 node 0 [ 0.255082] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.255086] pci 0000:00:1c.0: setting latency timer to 64 [ 0.255092] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.255096] pci 0000:00:1c.4: setting latency timer to 64 [ 0.255102] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 0.255106] pci 0000:00:1c.5: setting latency timer to 64 [ 0.255112] pci 0000:00:1e.0: setting latency timer to 64 [ 0.255115] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.255118] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.255120] pci_bus 0000:01: resource 0 mem: [0x0-0x0] [ 0.255122] pci_bus 0000:01: resource 1 mem: [0x0-0x0] [ 0.255124] pci_bus 0000:01: resource 2 mem: [0xbfd00000-0xbfdfffff] [ 0.255126] pci_bus 0000:01: resource 3 mem: [0x0-0x0] [ 0.255128] pci_bus 0000:04: resource 0 mem: [0x0-0x0] [ 0.255130] pci_bus 0000:04: resource 1 mem: [0x0-0x0] [ 0.255132] pci_bus 0000:04: resource 2 mem: [0xbfe00000-0xbfefffff] [ 0.255134] pci_bus 0000:04: resource 3 mem: [0x0-0x0] [ 0.255137] pci_bus 0000:03: resource 0 io: [0xa000-0xafff] [ 0.255139] pci_bus 0000:03: resource 1 mem: [0xff600000-0xff6fffff] [ 0.255141] pci_bus 0000:03: resource 2 mem: [0x0-0x0] [ 0.255143] pci_bus 0000:03: resource 3 mem: [0x0-0x0] [ 0.255145] pci_bus 0000:02: resource 0 io: [0x9000-0x9fff] [ 0.255147] pci_bus 0000:02: resource 1 mem: [0xff500000-0xff5fffff] [ 0.255149] pci_bus 0000:02: resource 2 mem: [0x0-0x0] [ 0.255151] pci_bus 0000:02: resource 3 mem: [0x0-0x0] [ 0.255153] pci_bus 0000:05: resource 0 io: [0xb000-0xbfff] [ 0.255155] pci_bus 0000:05: resource 1 mem: [0xff700000-0xff7fffff] [ 0.255157] pci_bus 0000:05: resource 2 mem: [0x0-0x0] [ 0.255159] pci_bus 0000:05: resource 3 io: [0x00-0xffff] [ 0.255161] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.255252] NET: Registered protocol family 2 [ 0.288622] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.290519] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.296418] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.297170] TCP: Hash tables configured (established 524288 bind 65536) [ 0.297173] TCP reno registered [ 0.308669] NET: Registered protocol family 1 [ 0.308800] checking if image is initramfs...<7>Switched to high resolution mode on CPU 1 [ 0.504476] Switched to high resolution mode on CPU 0 [ 0.703739] it is [ 1.123787] Freeing initrd memory: 9337k freed [ 1.130314] audit: initializing netlink socket (disabled) [ 1.130330] type=2000 audit(1247118089.128:1): initialized [ 1.130642] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.130799] VFS: Disk quotas dquot_6.5.2 [ 1.130839] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.130918] msgmni has been set to 5521 [ 1.131062] alg: No test for stdrng (krng) [ 1.131130] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.131133] io scheduler noop registered [ 1.131135] io scheduler anticipatory registered [ 1.131137] io scheduler deadline registered [ 1.131167] io scheduler cfq registered (default) [ 1.131181] pci 0000:00:02.0: Boot video device [ 2.128108] pcieport-driver 0000:00:01.0: setting latency timer to 64 [ 2.128153] alloc irq_desc for 24 on cpu 0 node 0 [ 2.128156] alloc kstat_irqs on cpu 0 node 0 [ 2.128163] pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X [ 2.128286] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 2.128332] alloc irq_desc for 25 on cpu 0 node 0 [ 2.128334] alloc kstat_irqs on cpu 0 node 0 [ 2.128339] pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X [ 2.128502] pcieport-driver 0000:00:1c.4: setting latency timer to 64 [ 2.128548] alloc irq_desc for 26 on cpu 0 node 0 [ 2.128550] alloc kstat_irqs on cpu 0 node 0 [ 2.128555] pcieport-driver 0000:00:1c.4: irq 26 for MSI/MSI-X [ 2.128719] pcieport-driver 0000:00:1c.5: setting latency timer to 64 [ 2.128765] alloc irq_desc for 27 on cpu 0 node 0 [ 2.128767] alloc kstat_irqs on cpu 0 node 0 [ 2.128772] pcieport-driver 0000:00:1c.5: irq 27 for MSI/MSI-X [ 2.129322] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc20011100000, using 5120k, total 7616k [ 2.129325] vesafb: mode is 1280x1024x16, linelength=2560, pages=1 [ 2.129327] vesafb: scrolling: redraw [ 2.129329] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 [ 2.152011] Console: switching to colour frame buffer device 160x64 [ 2.174517] fb0: VESA VGA frame buffer device [ 2.177760] Linux agpgart interface v0.103 [ 2.177763] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.177891] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 2.178362] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 2.180287] brd: module loaded [ 2.180367] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 2.180665] PNP: No PS/2 controller found. Probing ports directly. [ 2.183384] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.183389] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.188164] mice: PS/2 mouse device common for all mice [ 2.188240] rtc_cmos 00:03: RTC can wake from S4 [ 2.188325] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 2.188348] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 2.188389] cpuidle: using governor ladder [ 2.188391] cpuidle: using governor menu [ 2.188396] No iBFT detected. [ 2.188728] TCP cubic registered [ 2.188730] NET: Registered protocol family 17 [ 2.188881] registered taskstats version 1 [ 2.189050] rtc_cmos 00:03: setting system clock to 2009-07-09 05:41:30 UTC (1247118090) [ 2.189088] Freeing unused kernel memory: 552k freed [ 2.294567] ACPI: SSDT AF7A00F0, 01C6 (r1 AMI CPU1PM 1 INTL 20060113) [ 2.294938] processor ACPI_CPU:00: registered as cooling_device0 [ 2.295249] ACPI: SSDT AF7A02C0, 013A (r1 AMI CPU2PM 1 INTL 20060113) [ 2.295589] processor ACPI_CPU:01: registered as cooling_device1 [ 2.347031] agpgart-intel 0000:00:00.0: Intel 965G Chipset [ 2.347597] agpgart-intel 0000:00:00.0: detected 7676K stolen memory [ 2.350444] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 2.353531] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.353566] alloc irq_desc for 18 on cpu 0 node 0 [ 2.353569] alloc kstat_irqs on cpu 0 node 0 [ 2.353577] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 2.353600] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 2.353603] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 2.353698] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 2.357599] ehci_hcd 0000:00:1a.7: debug port 1 [ 2.357605] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 2.357627] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xff9fb800 [ 2.374765] SCSI subsystem initialized [ 2.386918] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 2.386944] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.386946] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.386949] usb usb1: Product: EHCI Host Controller [ 2.386951] usb usb1: Manufacturer: Linux 2.6.29-2-amd64 ehci_hcd [ 2.386953] usb usb1: SerialNumber: 0000:00:1a.7 [ 2.387031] usb usb1: configuration #1 chosen from 1 choice [ 2.387063] hub 1-0:1.0: USB hub found [ 2.387072] hub 1-0:1.0: 4 ports detected [ 2.387242] alloc irq_desc for 23 on cpu 0 node 0 [ 2.387245] alloc kstat_irqs on cpu 0 node 0 [ 2.387253] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 2.387281] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 2.387285] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 2.387341] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 2.391256] ehci_hcd 0000:00:1d.7: debug port 1 [ 2.391263] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 2.391284] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xff9fb400 [ 2.396786] libata version 3.00 loaded. [ 2.405272] Uniform Multi-Platform E-IDE driver [ 2.408008] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 2.408042] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.408044] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.408047] usb usb2: Product: EHCI Host Controller [ 2.408049] usb usb2: Manufacturer: Linux 2.6.29-2-amd64 ehci_hcd [ 2.408051] usb usb2: SerialNumber: 0000:00:1d.7 [ 2.408115] usb usb2: configuration #1 chosen from 1 choice [ 2.408154] hub 2-0:1.0: USB hub found [ 2.408162] hub 2-0:1.0: 6 ports detected [ 2.408277] jmicron 0000:03:00.1: IDE controller (0x197b:0x2363 rev 0x02) [ 2.408290] JMicron IDE 0000:03:00.1: enabling device (0000 -> 0001) [ 2.408297] JMicron IDE 0000:03:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 2.408324] jmicron 0000:03:00.1: 100% native mode on irq 17 [ 2.408335] JMicron IDE 0000:03:00.1: setting latency timer to 64 [ 2.408341] ide0: BM-DMA at 0xa400-0xa407 [ 2.408354] ide1: BM-DMA at 0xa408-0xa40f [ 2.408361] Probing IDE interface ide0... [ 2.422942] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 2.438423] uhci_hcd: USB Universal Host Controller Interface driver [ 2.696382] hda: WDC WD5000AAKB-00UKA0, ATA DISK drive [ 2.976386] hdb: WDC WD5000AAKB-00UKA0, ATA DISK drive [ 3.032073] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4 [ 3.032171] hda: UDMA/100 mode selected [ 3.032280] hdb: host max PIO5 wanted PIO255(auto-tune) selected PIO4 [ 3.032391] hdb: UDMA/100 mode selected [ 3.032496] Probing IDE interface ide1... [ 3.600106] ide0 at 0xac00-0xac07,0xa882 on irq 17 [ 3.600131] isa bounce pool size: 16 pages [ 3.633080] ide1 at 0xa800-0xa807,0xa482 on irq 17 [ 3.633191] 8139cp 0000:05:03.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too [ 3.633198] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.633220] r8169 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 3.633238] r8169 0000:02:00.0: setting latency timer to 64 [ 3.633342] alloc irq_desc for 28 on cpu 0 node 0 [ 3.633345] alloc kstat_irqs on cpu 0 node 0 [ 3.633355] r8169 0000:02:00.0: irq 28 for MSI/MSI-X [ 3.633672] eth0: RTL8168b/8111b at 0xffffc20000660000, 00:18:f3:07:7f:9f, XID 38000000 IRQ 28 [ 3.635062] ata_piix 0000:00:1f.2: version 2.12 [ 3.635074] alloc irq_desc for 19 on cpu 0 node 0 [ 3.635077] alloc kstat_irqs on cpu 0 node 0 [ 3.635083] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 3.635088] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 3.636909] 8139too Fast Ethernet driver 0.9.28 [ 3.788076] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 3.788144] scsi0 : ata_piix [ 3.788282] scsi1 : ata_piix [ 3.790828] ata1: SATA max UDMA/133 cmd 0xe880 ctl 0xe800 bmdma 0xe080 irq 19 [ 3.790833] ata2: SATA max UDMA/133 cmd 0xe480 ctl 0xe400 bmdma 0xe088 irq 19 [ 4.584112] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 4.584124] ata1.01: SATA link down (SStatus 4 SControl 300) [ 4.638566] ata1.00: ATA-7: ST3500630AS, 3.AAK, max UDMA/133 [ 4.638569] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 4.705214] ata1.00: configured for UDMA/133 [ 4.705321] scsi 0:0:0:0: Direct-Access ATA ST3500630AS 3.AA PQ: 0 ANSI: 5 [ 5.354708] ata2.00: SATA link down (SStatus 0 SControl 300) [ 5.354716] ata2.01: SATA link down (SStatus 4 SControl 300) [ 5.354744] alloc irq_desc for 20 on cpu 0 node 0 [ 5.354746] alloc kstat_irqs on cpu 0 node 0 [ 5.354752] firewire_ohci 0000:05:01.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 5.424027] firewire_ohci: Added fw-ohci device 0000:05:01.0, OHCI version 1.10 [ 5.424037] ahci 0000:03:00.0: version 3.0 [ 5.424064] ahci 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 5.440053] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 5.440058] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part [ 5.440065] ahci 0000:03:00.0: setting latency timer to 64 [ 5.440258] scsi2 : ahci [ 5.440352] scsi3 : ahci [ 5.440443] ata3: SATA max UDMA/133 abar m8192@0xff6fe000 port 0xff6fe100 irq 16 [ 5.440447] ata4: SATA max UDMA/133 abar m8192@0xff6fe000 port 0xff6fe180 irq 16 [ 5.760064] ata3: SATA link down (SStatus 0 SControl 300) [ 5.924095] firewire_core: created device fw0: GUID 0011d80000e0a234, S400 [ 6.096564] ata4: SATA link down (SStatus 0 SControl 300) [ 6.112565] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 6.112574] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 6.112578] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 6.112658] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 6.112683] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000d880 [ 6.112732] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 6.112735] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.112738] usb usb3: Product: UHCI Host Controller [ 6.112740] usb usb3: Manufacturer: Linux 2.6.29-2-amd64 uhci_hcd [ 6.112742] usb usb3: SerialNumber: 0000:00:1a.0 [ 6.112802] usb usb3: configuration #1 chosen from 1 choice [ 6.112846] hub 3-0:1.0: USB hub found [ 6.112854] hub 3-0:1.0: 2 ports detected [ 6.112976] 8139too 0000:05:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 6.113515] eth1: RealTek RTL8139 at 0xffffc20000666400, 00:e0:7d:c5:d2:13, IRQ 16 [ 6.113517] eth1: Identified 8139 chip type 'RTL-8139C' [ 6.113807] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 6.113812] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] [ 6.113867] ata_piix 0000:00:1f.5: setting latency timer to 64 [ 6.114958] scsi4 : ata_piix [ 6.115390] scsi5 : ata_piix [ 6.117087] ata5: SATA max UDMA/133 cmd 0xd080 ctl 0xd000 bmdma 0xc800 irq 19 [ 6.117092] ata6: SATA max UDMA/133 cmd 0xcc00 ctl 0xc880 bmdma 0xc808 irq 19 [ 6.446614] ata5: SATA link down (SStatus 0 SControl 300) [ 6.774613] ata6: SATA link down (SStatus 0 SControl 300) [ 6.774818] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 6.774827] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 6.774830] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 6.774907] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 6.774933] uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000dc00 [ 6.774974] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 6.774976] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.774978] usb usb4: Product: UHCI Host Controller [ 6.774980] usb usb4: Manufacturer: Linux 2.6.29-2-amd64 uhci_hcd [ 6.774982] usb usb4: SerialNumber: 0000:00:1a.1 [ 6.775033] usb usb4: configuration #1 chosen from 1 choice [ 6.775065] hub 4-0:1.0: USB hub found [ 6.775071] hub 4-0:1.0: 2 ports detected [ 6.775358] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 6.775364] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 6.775367] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 6.775421] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 6.775444] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d400 [ 6.775481] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 6.775484] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.775486] usb usb5: Product: UHCI Host Controller [ 6.775488] usb usb5: Manufacturer: Linux 2.6.29-2-amd64 uhci_hcd [ 6.775490] usb usb5: SerialNumber: 0000:00:1d.0 [ 6.775541] usb usb5: configuration #1 chosen from 1 choice [ 6.775570] hub 5-0:1.0: USB hub found [ 6.775578] hub 5-0:1.0: 2 ports detected [ 6.775683] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 6.775689] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 6.775692] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 6.775742] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 6.775764] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d480 [ 6.775801] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 6.775803] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.775806] usb usb6: Product: UHCI Host Controller [ 6.775807] usb usb6: Manufacturer: Linux 2.6.29-2-amd64 uhci_hcd [ 6.775809] usb usb6: SerialNumber: 0000:00:1d.1 [ 6.775856] usb usb6: configuration #1 chosen from 1 choice [ 6.775884] hub 6-0:1.0: USB hub found [ 6.775891] hub 6-0:1.0: 2 ports detected [ 6.775997] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 6.776010] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 6.776013] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 6.776063] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 6.776085] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d800 [ 6.776121] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 6.776124] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.776126] usb usb7: Product: UHCI Host Controller [ 6.776128] usb usb7: Manufacturer: Linux 2.6.29-2-amd64 uhci_hcd [ 6.776130] usb usb7: SerialNumber: 0000:00:1d.2 [ 6.776176] usb usb7: configuration #1 chosen from 1 choice [ 6.776204] hub 7-0:1.0: USB hub found [ 6.776211] hub 7-0:1.0: 2 ports detected [ 6.841640] ide-gd driver 1.18 [ 6.841673] hda: max request size: 512KiB [ 6.841867] hda: 976773168 sectors (500107 MB) w/16384KiB Cache, CHS=60801/255/63 [ 6.841989] hda: cache flushes supported [ 6.842037] hda: hda1 [ 6.860393] hdb: max request size: 512KiB [ 6.860593] hdb: 976773168 sectors (500107 MB) w/16384KiB Cache, CHS=60801/255/63 [ 6.860692] hdb: cache flushes supported [ 6.860724] hdb: hdb1 [ 6.882965] Driver 'sd' needs updating - please use bus_type methods [ 6.883078] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors: (500 GB/465 GiB) [ 6.883094] sd 0:0:0:0: [sda] Write Protect is off [ 6.883097] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 6.883121] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.883184] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors: (500 GB/465 GiB) [ 6.883198] sd 0:0:0:0: [sda] Write Protect is off [ 6.883201] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 6.883224] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.883229] sda: sda1 sda2 sda3 [ 6.902292] sd 0:0:0:0: [sda] Attached SCSI disk [ 7.084534] usb 5-2: new low speed USB device using uhci_hcd and address 2 [ 7.116436] device-mapper: uevent: version 1.0.3 [ 7.116940] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com [ 7.257454] usb 5-2: New USB device found, idVendor=046a, idProduct=0102 [ 7.257458] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.257460] usb 5-2: Product: wireless mouse [ 7.257462] usb 5-2: Manufacturer: MLK [ 7.257545] usb 5-2: configuration #1 chosen from 1 choice [ 7.300215] usbcore: registered new interface driver hiddev [ 7.312055] kjournald starting. Commit interval 5 seconds [ 7.312064] EXT3-fs: mounted filesystem with ordered data mode. [ 7.322968] input: MLK wireless mouse as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.0/input/input1 [ 7.344242] generic-usb 0003:046A:0102.0001: input,hiddev96,hidraw0: USB HID v1.10 Mouse [MLK wireless mouse] on usb-0000:00:1d.0-2/input0 [ 7.344265] usbcore: registered new interface driver usbhid [ 7.344268] usbhid: v2.6:USB HID core driver [ 7.400036] usb 6-2: new low speed USB device using uhci_hcd and address 2 [ 7.560756] usb 6-2: New USB device found, idVendor=046a, idProduct=0050 [ 7.560760] usb 6-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 7.560847] usb 6-2: configuration #1 chosen from 1 choice [ 7.578144] input: HID 046a:0050 as /devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2:1.0/input/input2 [ 7.604096] generic-usb 0003:046A:0050.0002: input,hidraw1: USB HID v1.11 Keyboard [HID 046a:0050] on usb-0000:00:1d.1-2/input0 [ 7.624851] input: HID 046a:0050 as /devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2:1.1/input/input3 [ 7.640060] generic-usb 0003:046A:0050.0003: input,hidraw2: USB HID v1.11 Device [HID 046a:0050] on usb-0000:00:1d.1-2/input1 [ 7.656050] input: HID 046a:0050 as /devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2:1.2/input/input4 [ 7.664077] generic-usb 0003:046A:0050.0004: input,hidraw3: USB HID v1.11 Mouse [HID 046a:0050] on usb-0000:00:1d.1-2/input2 [ 8.690016] udev: starting version 141 [ 8.880902] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5 [ 8.892048] ACPI: Power Button (FF) [PWRF] [ 8.892163] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input6 [ 8.904068] ACPI: Power Button (CM) [PWRB] [ 9.089147] parport_pc 00:0b: reported by Plug and Play ACPI [ 9.089256] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP] [ 9.147547] input: PC Speaker as /devices/platform/pcspkr/input/input7 [ 9.874127] i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003) [ 9.874136] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 9.874140] ACPI: I/O resource 0000:00:1f.3 [0x400-0x41f] conflicts with ACPI region SMRG [0x400-0x40f] [ 9.874142] ACPI: Device needs an ACPI driver [ 10.038904] alloc irq_desc for 22 on cpu 0 node 0 [ 10.038907] alloc kstat_irqs on cpu 0 node 0 [ 10.038914] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 10.039124] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 12.611274] EXT3 FS on dm-0, internal journal [ 12.722694] loop: module loaded [ 12.824714] w83627ehf: Found W83627DHG chip at 0x290 [ 12.824745] ACPI: I/O resource w83627ehf [0x295-0x296] conflicts with ACPI region HWRE [0x290-0x299] [ 12.824747] ACPI: Device needs an ACPI driver [ 12.844948] coretemp coretemp.0: Using relative temperature scale! [ 12.844996] coretemp coretemp.1: Using relative temperature scale! [ 13.893338] kjournald starting. Commit interval 5 seconds [ 13.896191] EXT3 FS on dm-4, internal journal [ 13.896195] EXT3-fs: mounted filesystem with ordered data mode. [ 13.911798] kjournald starting. Commit interval 5 seconds [ 13.912035] EXT3 FS on dm-3, internal journal [ 13.912038] EXT3-fs: mounted filesystem with ordered data mode. [ 13.927436] kjournald starting. Commit interval 5 seconds [ 13.927714] EXT3 FS on dm-1, internal journal [ 13.927717] EXT3-fs: mounted filesystem with ordered data mode. [ 13.936884] kjournald starting. Commit interval 5 seconds [ 13.937140] EXT3 FS on dm-2, internal journal [ 13.937144] EXT3-fs: mounted filesystem with ordered data mode. [ 13.966554] kjournald starting. Commit interval 5 seconds [ 13.966561] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended [ 13.966886] EXT3 FS on hdb1, internal journal [ 13.966889] EXT3-fs: mounted filesystem with ordered data mode. [ 14.000167] kjournald starting. Commit interval 5 seconds [ 14.000174] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended [ 14.008278] EXT3 FS on sda3, internal journal [ 14.008281] EXT3-fs: mounted filesystem with ordered data mode. [ 14.044372] kjournald starting. Commit interval 5 seconds [ 14.044378] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended [ 14.044723] EXT3 FS on hda1, internal journal [ 14.044727] EXT3-fs: mounted filesystem with ordered data mode. [ 14.167227] Adding 1535992k swap on /dev/mapper/vonNeumann-swap. Priority:-1 extents:1 across:1535992k [ 15.989925] fuse init (API version 7.11) [ 17.545703] r8169: eth0: link up [ 17.545710] r8169: eth0: link up [ 20.983495] NET: Registered protocol family 10 [ 20.984218] lo: Disabled Privacy Extensions [ 31.016005] eth0: no IPv6 routers present [ 31.042718] [drm] Initialized drm 1.1.0 20060810 [ 31.064027] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 31.064033] pci 0000:00:02.0: setting latency timer to 64 [ 31.079919] alloc irq_desc for 29 on cpu 0 node 0 [ 31.079922] alloc kstat_irqs on cpu 0 node 0 [ 31.079932] pci 0000:00:02.0: irq 29 for MSI/MSI-X [ 31.079971] [drm] Initialized i915 1.6.0 20080730 on minor 0 [ 55.120758] CPU0 attaching NULL sched-domain. [ 55.120764] CPU1 attaching NULL sched-domain. [ 55.136076] CPU0 attaching sched-domain: [ 55.136080] domain 0: span 0-1 level MC [ 55.136082] groups: 0 1 [ 55.136088] CPU1 attaching sched-domain: [ 55.136090] domain 0: span 0-1 level MC [ 55.136093] groups: 1 0[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.30-1-amd64 (Debian 2.6.30-2) (waldi@debian.org) (gcc version 4.3.3 (Debian 4.3.3-13) ) #1 SMP Wed Jul 8 12:20:34 UTC 2009 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.30-1-amd64 root=/dev/mapper/vonNeumann-root ro vga=0x31a selinux=0 enforcing=0 quiet [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000af790000 (usable) [ 0.000000] BIOS-e820: 00000000af790000 - 00000000af79e000 (ACPI data) [ 0.000000] BIOS-e820: 00000000af79e000 - 00000000af7e0000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000af7e0000 - 00000000af800000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.4 present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xaf790 max_arch_pfn = 0x100000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-DFFFF uncachable [ 0.000000] E0000-EFFFF write-through [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FE0000000 write-back [ 0.000000] 2 base 0A0000000 mask FF0000000 write-back [ 0.000000] 3 base 0B0000000 mask FF8000000 write-back [ 0.000000] 4 base 0B8000000 mask FFC000000 write-back [ 0.000000] 5 base 0AF800000 mask FFF800000 uncachable [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000af800000 - 00000000b0000000 (usable) ==> (reserved) [ 0.000000] init_memory_mapping: 0000000000000000-00000000af790000 [ 0.000000] 0000000000 - 00af600000 page 2M [ 0.000000] 00af600000 - 00af790000 page 4k [ 0.000000] kernel direct mapping tables up to af790000 @ 10000-15000 [ 0.000000] RAMDISK: 376aa000 - 37fef0ff [ 0.000000] ACPI: RSDP 00000000000fa950 00014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT 00000000af790000 00040 (v01 MSTEST TESTONLY 05000805 MSFT 00000097) [ 0.000000] ACPI: FACP 00000000af790200 00084 (v02 MSTEST OEMFACP 05000805 MSFT 00000097) [ 0.000000] ACPI: DSDT 00000000af7905c0 07C09 (v01 A0518 A0518000 00000000 INTL 20060113) [ 0.000000] ACPI: FACS 00000000af79e000 00040 [ 0.000000] ACPI: APIC 00000000af790390 0006C (v01 MSTEST OEMAPIC 05000805 MSFT 00000097) [ 0.000000] ACPI: MCFG 00000000af790400 0003C (v01 MSTEST OEMMCFG 05000805 MSFT 00000097) [ 0.000000] ACPI: OEMB 00000000af79e040 0007B (v01 MSTEST AMI_OEM 05000805 MSFT 00000097) [ 0.000000] ACPI: HPET 00000000af7981d0 00038 (v01 MSTEST OEMHPET 05000805 MSFT 00000097) [ 0.000000] ACPI: ASF! 00000000af798208 00099 (v32 LEGEND I865PASF 00000001 INTL 20060113) [ 0.000000] ACPI: GSCI 00000000af79e0c0 02024 (v01 MSTEST GMCHSCI 05000805 MSFT 00000097) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-00000000af790000 [ 0.000000] Bootmem setup node 0 0000000000000000-00000000af790000 [ 0.000000] NODE_DATA [0000000000013000 - 000000000001afff] [ 0.000000] bootmap [000000000001b000 - 0000000000030ef7] pages 16 [ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 00af790000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0000200000 - 00007db8cc] TEXT DATA BSS ==> [0000200000 - 00007db8cc] [ 0.000000] #3 [00376aa000 - 0037fef0ff] RAMDISK ==> [00376aa000 - 0037fef0ff] [ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #5 [00007dc000 - 00007dc28c] BRK ==> [00007dc000 - 00007dc28c] [ 0.000000] #6 [0000010000 - 0000013000] PGTABLE ==> [0000010000 - 0000013000] [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780 [ 0.000000] [ffffe20000000000-ffffe200027fffff] PMD -> [ffff880001200000-ffff8800039fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00100000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000af790 [ 0.000000] On node 0 totalpages: 718623 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1601 pages reserved [ 0.000000] DMA zone: 2326 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 9771 pages used for memmap [ 0.000000] DMA32 zone: 704869 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a202 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000 [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at b0000000 (gap: af800000:4f600000) [ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 26 pages at ffff88000101c000, static data 76256 bytes [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 707195 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.30-1-amd64 root=/dev/mapper/vonNeumann-root ro vga=0x31a selinux=0 enforcing=0 quiet [ 0.000000] Initializing CPU#0 [ 0.000000] Experimental hierarchical RCU implementation. [ 0.000000] Experimental hierarchical RCU init done. [ 0.000000] NR_IRQS:4352 nr_irqs:440 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1866.702 MHz processor. [ 0.004000] Console: colour dummy device 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Checking aperture... [ 0.004000] No AGP bridge found [ 0.004000] Calgary: detecting Calgary via BIOS EBDA area [ 0.004000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.004000] Memory: 2817388k/2874944k available (2781k kernel code, 452k absent, 57104k reserved, 1406k data, 560k init) [ 0.004000] hpet clockevent registered [ 0.004000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3733.40 BogoMIPS (lpj=7466808) [ 0.004000] Security Framework initialized [ 0.004000] SELinux: Disabled at boot. [ 0.004000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.004000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.005021] Mount-cache hash table entries: 256 [ 0.005229] Initializing cgroup subsys ns [ 0.005234] Initializing cgroup subsys cpuacct [ 0.005238] Initializing cgroup subsys devices [ 0.005240] Initializing cgroup subsys freezer [ 0.005243] Initializing cgroup subsys net_cls [ 0.005282] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.005284] CPU: L2 cache: 2048K [ 0.005287] CPU 0/0x0 -> Node 0 [ 0.005289] CPU: Physical Processor ID: 0 [ 0.005291] CPU: Processor Core ID: 0 [ 0.005300] CPU0: Thermal monitoring enabled (TM2) [ 0.005304] using mwait in idle threads. [ 0.006384] ACPI: Core revision 20090320 [ 0.020058] Setting APIC routing to flat [ 0.024141] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.063827] CPU0: Intel(R) Core(TM)2 CPU 6300 @ 1.86GHz stepping 06 [ 0.064001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.004000] Initializing CPU#1 [ 0.004000] Calibrating delay using timer specific routine.. 3733.31 BogoMIPS (lpj=7466630) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 2048K [ 0.004000] CPU 1/0x1 -> Node 0 [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 1 [ 0.004000] CPU1: Thermal monitoring enabled (TM2) [ 0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.149223] CPU1: Intel(R) Core(TM)2 CPU 6300 @ 1.86GHz stepping 06 [ 0.149248] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.152027] Brought up 2 CPUs [ 0.152030] Total of 2 processors activated (7466.71 BogoMIPS). [ 0.152094] CPU0 attaching sched-domain: [ 0.152097] domain 0: span 0-1 level MC [ 0.152100] groups: 0 1 [ 0.152106] CPU1 attaching sched-domain: [ 0.152108] domain 0: span 0-1 level MC [ 0.152110] groups: 1 0 [ 0.152180] net_namespace: 1936 bytes [ 0.152180] Booting paravirtualized kernel on bare hardware [ 0.152180] regulator: core version 0.5 [ 0.152180] NET: Registered protocol family 16 [ 0.152180] ACPI: bus type pci registered [ 0.152180] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.152180] PCI: Not using MMCONFIG. [ 0.152180] PCI: Using configuration type 1 for base access [ 0.156099] bio: create slab <bio-0> at 0 [ 0.156735] ACPI: EC: Look up EC in DSDT [ 0.168218] ACPI: Interpreter enabled [ 0.168222] ACPI: (supports S0 S1 S3 S4 S5) [ 0.168251] ACPI: Using IOAPIC for interrupt routing [ 0.168318] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.172540] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources [ 0.179935] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.190306] ACPI Warning (tbutils-0246): Incorrect checksum in table [OEMB] - 5C, should be 4F [20090320] [ 0.192803] ACPI: No dock devices found. [ 0.192884] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.192925] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.192925] pci 0000:00:01.0: PME# disabled [ 0.192925] pci 0000:00:02.0: reg 10 32bit mmio: [0xffa00000-0xffafffff] [ 0.192925] pci 0000:00:02.0: reg 18 64bit mmio: [0xd0000000-0xdfffffff] [ 0.192925] pci 0000:00:02.0: reg 20 io port: [0xec00-0xec07] [ 0.192925] pci 0000:00:1a.0: reg 20 io port: [0xd880-0xd89f] [ 0.192925] pci 0000:00:1a.1: reg 20 io port: [0xdc00-0xdc1f] [ 0.192925] pci 0000:00:1a.7: reg 10 32bit mmio: [0xff9fb800-0xff9fbbff] [ 0.192925] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.192925] pci 0000:00:1a.7: PME# disabled [ 0.192925] pci 0000:00:1b.0: reg 10 64bit mmio: [0xff9f4000-0xff9f7fff] [ 0.192925] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.192925] pci 0000:00:1b.0: PME# disabled [ 0.192925] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.192925] pci 0000:00:1c.0: PME# disabled [ 0.192925] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.192925] pci 0000:00:1c.4: PME# disabled [ 0.192925] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.192925] pci 0000:00:1c.5: PME# disabled [ 0.192925] pci 0000:00:1d.0: reg 20 io port: [0xd400-0xd41f] [ 0.192925] pci 0000:00:1d.1: reg 20 io port: [0xd480-0xd49f] [ 0.192925] pci 0000:00:1d.2: reg 20 io port: [0xd800-0xd81f] [ 0.192925] pci 0000:00:1d.7: reg 10 32bit mmio: [0xff9fb400-0xff9fb7ff] [ 0.192925] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.192925] pci 0000:00:1d.7: PME# disabled [ 0.192958] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO [ 0.192962] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO [ 0.192966] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003) [ 0.193014] pci 0000:00:1f.2: reg 10 io port: [0xe880-0xe887] [ 0.193020] pci 0000:00:1f.2: reg 14 io port: [0xe800-0xe803] [ 0.193025] pci 0000:00:1f.2: reg 18 io port: [0xe480-0xe487] [ 0.193031] pci 0000:00:1f.2: reg 1c io port: [0xe400-0xe403] [ 0.193037] pci 0000:00:1f.2: reg 20 io port: [0xe080-0xe08f] [ 0.193043] pci 0000:00:1f.2: reg 24 io port: [0xe000-0xe00f] [ 0.193061] pci 0000:00:1f.2: PME# supported from D3hot [ 0.193065] pci 0000:00:1f.2: PME# disabled [ 0.193084] pci 0000:00:1f.3: reg 10 32bit mmio: [0x000000-0x0000ff] [ 0.193101] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f] [ 0.193138] pci 0000:00:1f.5: reg 10 io port: [0xd080-0xd087] [ 0.193144] pci 0000:00:1f.5: reg 14 io port: [0xd000-0xd003] [ 0.193150] pci 0000:00:1f.5: reg 18 io port: [0xcc00-0xcc07] [ 0.193155] pci 0000:00:1f.5: reg 1c io port: [0xc880-0xc883] [ 0.193161] pci 0000:00:1f.5: reg 20 io port: [0xc800-0xc80f] [ 0.193167] pci 0000:00:1f.5: reg 24 io port: [0xc480-0xc48f] [ 0.193186] pci 0000:00:1f.5: PME# supported from D3hot [ 0.193189] pci 0000:00:1f.5: PME# disabled [ 0.193236] pci 0000:00:01.0: bridge 64bit mmio pref: [0xbfd00000-0xbfdfffff] [ 0.193280] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xbfe00000-0xbfefffff] [ 0.193367] pci 0000:03:00.0: reg 24 32bit mmio: [0xff6fe000-0xff6fffff] [ 0.193377] pci 0000:03:00.0: reg 30 32bit mmio: [0xff6e0000-0xff6effff] [ 0.193407] pci 0000:03:00.0: PME# supported from D3hot [ 0.193413] pci 0000:03:00.0: PME# disabled [ 0.193466] pci 0000:03:00.1: reg 10 io port: [0xac00-0xac07] [ 0.193475] pci 0000:03:00.1: reg 14 io port: [0xa880-0xa883] [ 0.193484] pci 0000:03:00.1: reg 18 io port: [0xa800-0xa807] [ 0.193492] pci 0000:03:00.1: reg 1c io port: [0xa480-0xa483] [ 0.193501] pci 0000:03:00.1: reg 20 io port: [0xa400-0xa40f] [ 0.193589] pci 0000:00:1c.4: bridge io port: [0xa000-0xafff] [ 0.193593] pci 0000:00:1c.4: bridge 32bit mmio: [0xff600000-0xff6fffff] [ 0.193653] pci 0000:02:00.0: reg 10 io port: [0x9800-0x98ff] [ 0.193674] pci 0000:02:00.0: reg 18 64bit mmio: [0xff5ff000-0xff5fffff] [ 0.193696] pci 0000:02:00.0: reg 30 32bit mmio: [0xff5c0000-0xff5dffff] [ 0.193741] pci 0000:02:00.0: supports D1 D2 [ 0.193744] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.193749] pci 0000:02:00.0: PME# disabled [ 0.193800] pci 0000:00:1c.5: bridge io port: [0x9000-0x9fff] [ 0.193804] pci 0000:00:1c.5: bridge 32bit mmio: [0xff500000-0xff5fffff] [ 0.193846] pci 0000:05:01.0: reg 10 32bit mmio: [0xff7ff800-0xff7fffff] [ 0.193853] pci 0000:05:01.0: reg 14 32bit mmio: [0xff7f8000-0xff7fbfff] [ 0.193894] pci 0000:05:01.0: supports D1 D2 [ 0.193896] pci 0000:05:01.0: PME# supported from D0 D1 D2 D3hot [ 0.193900] pci 0000:05:01.0: PME# disabled [ 0.193935] pci 0000:05:03.0: reg 10 io port: [0xb800-0xb8ff] [ 0.193942] pci 0000:05:03.0: reg 14 32bit mmio: [0xff7ff400-0xff7ff4ff] [ 0.193982] pci 0000:05:03.0: supports D1 D2 [ 0.193984] pci 0000:05:03.0: PME# supported from D1 D2 D3hot D3cold [ 0.193989] pci 0000:05:03.0: PME# disabled [ 0.194030] pci 0000:00:1e.0: transparent bridge [ 0.194034] pci 0000:00:1e.0: bridge io port: [0xb000-0xbfff] [ 0.194038] pci 0000:00:1e.0: bridge 32bit mmio: [0xff700000-0xff7fffff] [ 0.194065] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.194266] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] [ 0.194340] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.194461] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT] [ 0.194540] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT] [ 0.194627] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] [ 0.216118] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.216271] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.216423] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.216574] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 *15) [ 0.216724] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.216875] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.217026] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.217178] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 *14 15) [ 0.217246] usbcore: registered new interface driver usbfs [ 0.217246] usbcore: registered new interface driver hub [ 0.217246] usbcore: registered new device driver usb [ 0.217246] PCI: Using ACPI for IRQ routing [ 0.228037] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.228043] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.244087] pnp: PnP ACPI init [ 0.244097] ACPI: bus type pnp registered [ 0.246787] pnp 00:09: mem resource (0xffafe000-0xffafefff) overlaps 0000:00:02.0 BAR 0 (0xffa00000-0xffafffff), disabling [ 0.249749] pnp: PnP ACPI: found 15 devices [ 0.249752] ACPI: ACPI bus type pnp unregistered [ 0.249763] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved [ 0.249771] system 00:08: ioport range 0x290-0x297 has been reserved [ 0.249778] system 00:09: ioport range 0x4d0-0x4d1 has been reserved [ 0.249781] system 00:09: ioport range 0x800-0x87f has been reserved [ 0.249784] system 00:09: ioport range 0x480-0x4bf has been reserved [ 0.249788] system 00:09: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 0.249791] system 00:09: iomem range 0xfed20000-0xfed8ffff has been reserved [ 0.249795] system 00:09: iomem range 0xff9fa000-0xff9fafff has been reserved [ 0.249798] system 00:09: iomem range 0xfff00000-0xfffffffe has been reserved [ 0.249801] system 00:09: iomem range 0xfebfe000-0xfebfefff has been reserved [ 0.249810] system 00:0c: iomem range 0xfec00000-0xfec00fff has been reserved [ 0.249813] system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.249819] system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved [ 0.249826] system 00:0e: iomem range 0x0-0x9ffff could not be reserved [ 0.249829] system 00:0e: iomem range 0xc0000-0xcffff has been reserved [ 0.249832] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved [ 0.249836] system 00:0e: iomem range 0x100000-0xaf7fffff could not be reserved [ 0.254834] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.254837] pci 0000:00:01.0: IO window: disabled [ 0.254840] pci 0000:00:01.0: MEM window: disabled [ 0.254844] pci 0000:00:01.0: PREFETCH window: 0x000000bfd00000-0x000000bfdfffff [ 0.254849] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:04 [ 0.254851] pci 0000:00:1c.0: IO window: disabled [ 0.254855] pci 0000:00:1c.0: MEM window: disabled [ 0.254859] pci 0000:00:1c.0: PREFETCH window: 0x000000bfe00000-0x000000bfefffff [ 0.254865] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:03 [ 0.254869] pci 0000:00:1c.4: IO window: 0xa000-0xafff [ 0.254873] pci 0000:00:1c.4: MEM window: 0xff600000-0xff6fffff [ 0.254877] pci 0000:00:1c.4: PREFETCH window: disabled [ 0.254883] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:02 [ 0.254886] pci 0000:00:1c.5: IO window: 0x9000-0x9fff [ 0.254891] pci 0000:00:1c.5: MEM window: 0xff500000-0xff5fffff [ 0.254895] pci 0000:00:1c.5: PREFETCH window: disabled [ 0.254901] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05 [ 0.254904] pci 0000:00:1e.0: IO window: 0xb000-0xbfff [ 0.254909] pci 0000:00:1e.0: MEM window: 0xff700000-0xff7fffff [ 0.254913] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.254923] alloc irq_desc for 16 on cpu 0 node 0 [ 0.254926] alloc kstat_irqs on cpu 0 node 0 [ 0.254931] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.254935] pci 0000:00:01.0: setting latency timer to 64 [ 0.254942] alloc irq_desc for 17 on cpu 0 node 0 [ 0.254944] alloc kstat_irqs on cpu 0 node 0 [ 0.254948] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.254952] pci 0000:00:1c.0: setting latency timer to 64 [ 0.254959] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.254963] pci 0000:00:1c.4: setting latency timer to 64 [ 0.254969] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 0.254973] pci 0000:00:1c.5: setting latency timer to 64 [ 0.254979] pci 0000:00:1e.0: setting latency timer to 64 [ 0.254983] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.254986] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.254989] pci_bus 0000:01: resource 2 pref mem [0xbfd00000-0xbfdfffff] [ 0.254992] pci_bus 0000:04: resource 2 pref mem [0xbfe00000-0xbfefffff] [ 0.254995] pci_bus 0000:03: resource 0 io: [0xa000-0xafff] [ 0.254997] pci_bus 0000:03: resource 1 mem: [0xff600000-0xff6fffff] [ 0.255000] pci_bus 0000:02: resource 0 io: [0x9000-0x9fff] [ 0.255003] pci_bus 0000:02: resource 1 mem: [0xff500000-0xff5fffff] [ 0.255006] pci_bus 0000:05: resource 0 io: [0xb000-0xbfff] [ 0.255008] pci_bus 0000:05: resource 1 mem: [0xff700000-0xff7fffff] [ 0.255011] pci_bus 0000:05: resource 3 io: [0x00-0xffff] [ 0.255013] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.255109] NET: Registered protocol family 2 [ 0.288663] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.290585] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.296460] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.297213] TCP: Hash tables configured (established 524288 bind 65536) [ 0.297216] TCP reno registered [ 0.304673] NET: Registered protocol family 1 [ 0.304738] Trying to unpack rootfs image as initramfs... [ 0.501781] Switched to high resolution mode on CPU 1 [ 0.504510] Switched to high resolution mode on CPU 0 [ 0.576881] Freeing initrd memory: 9492k freed [ 0.583593] audit: initializing netlink socket (disabled) [ 0.583618] type=2000 audit(1247117567.580:1): initialized [ 0.583944] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.584110] VFS: Disk quotas dquot_6.5.2 [ 0.584152] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.584221] msgmni has been set to 5521 [ 0.584410] alg: No test for stdrng (krng) [ 0.584476] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.584479] io scheduler noop registered [ 0.584481] io scheduler anticipatory registered [ 0.584483] io scheduler deadline registered [ 0.584514] io scheduler cfq registered (default) [ 0.584528] pci 0000:00:02.0: Boot video device [ 3.088026] pci 0000:00:1a.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001 [ 3.088412] alloc irq_desc for 24 on cpu 0 node 0 [ 3.088415] alloc kstat_irqs on cpu 0 node 0 [ 3.088425] pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X [ 3.088435] pcieport-driver 0000:00:01.0: setting latency timer to 64 [ 3.088621] alloc irq_desc for 25 on cpu 0 node 0 [ 3.088623] alloc kstat_irqs on cpu 0 node 0 [ 3.088631] pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X [ 3.088643] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 3.088876] alloc irq_desc for 26 on cpu 0 node 0 [ 3.088878] alloc kstat_irqs on cpu 0 node 0 [ 3.088885] pcieport-driver 0000:00:1c.4: irq 26 for MSI/MSI-X [ 3.088897] pcieport-driver 0000:00:1c.4: setting latency timer to 64 [ 3.089130] alloc irq_desc for 27 on cpu 0 node 0 [ 3.089132] alloc kstat_irqs on cpu 0 node 0 [ 3.089140] pcieport-driver 0000:00:1c.5: irq 27 for MSI/MSI-X [ 3.089152] pcieport-driver 0000:00:1c.5: setting latency timer to 64 [ 3.089692] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc20011100000, using 5120k, total 7616k [ 3.089696] vesafb: mode is 1280x1024x16, linelength=2560, pages=1 [ 3.089698] vesafb: scrolling: redraw [ 3.089700] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 [ 3.112395] Console: switching to colour frame buffer device 160x64 [ 3.134904] fb0: VESA VGA frame buffer device [ 3.138325] Linux agpgart interface v0.103 [ 3.138328] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 3.138459] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 3.138943] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 3.140977] brd: module loaded [ 3.141055] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 3.141342] PNP: No PS/2 controller found. Probing ports directly. [ 3.143658] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 3.143664] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 3.143841] mice: PS/2 mouse device common for all mice [ 3.143905] rtc_cmos 00:03: RTC can wake from S4 [ 3.143969] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 3.143993] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 3.144198] cpuidle: using governor ladder [ 3.144200] cpuidle: using governor menu [ 3.144205] No iBFT detected. [ 3.144544] TCP cubic registered [ 3.144634] NET: Registered protocol family 10 [ 3.145152] lo: Disabled Privacy Extensions [ 3.145444] Mobile IPv6 [ 3.145447] NET: Registered protocol family 17 [ 3.145610] registered taskstats version 1 [ 3.145784] rtc_cmos 00:03: setting system clock to 2009-07-09 05:32:51 UTC (1247117571) [ 3.145838] Freeing unused kernel memory: 560k freed [ 3.146080] Write protecting the kernel read-only data: 3800k [ 3.289616] Floppy drive(s): fd0 is 1.44M [ 3.305363] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.305708] agpgart-intel 0000:00:00.0: Intel 965G Chipset [ 3.306237] agpgart-intel 0000:00:00.0: detected 7676K stolen memory [ 3.309804] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 3.310514] FDC 0 is a post-1991 82077 [ 3.310803] alloc irq_desc for 18 on cpu 0 node 0 [ 3.310806] alloc kstat_irqs on cpu 0 node 0 [ 3.310815] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 3.310829] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 3.310833] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 3.310917] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 3.314842] ehci_hcd 0000:00:1a.7: debug port 1 [ 3.314847] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 3.314864] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xff9fb800 [ 3.328039] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 3.328066] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.328069] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.328072] usb usb1: Product: EHCI Host Controller [ 3.328074] usb usb1: Manufacturer: Linux 2.6.30-1-amd64 ehci_hcd [ 3.328077] usb usb1: SerialNumber: 0000:00:1a.7 [ 3.328148] usb usb1: configuration #1 chosen from 1 choice [ 3.328191] hub 1-0:1.0: USB hub found [ 3.328200] hub 1-0:1.0: 4 ports detected [ 3.338027] SCSI subsystem initialized [ 3.353302] alloc irq_desc for 23 on cpu 0 node 0 [ 3.353305] alloc kstat_irqs on cpu 0 node 0 [ 3.353315] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 3.353338] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 3.353342] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 3.353430] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 3.357355] ehci_hcd 0000:00:1d.7: debug port 1 [ 3.357361] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 3.357379] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xff9fb400 [ 3.361696] libata version 3.00 loaded. [ 3.362191] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.362212] r8169 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 3.362227] r8169 0000:02:00.0: setting latency timer to 64 [ 3.362314] alloc irq_desc for 28 on cpu 0 node 0 [ 3.362316] alloc kstat_irqs on cpu 0 node 0 [ 3.362330] r8169 0000:02:00.0: irq 28 for MSI/MSI-X [ 3.362957] eth0: RTL8168b/8111b at 0xffffc20000672000, 00:18:f3:07:7f:9f, XID 38000000 IRQ 28 [ 3.364381] pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001) [ 3.364388] pata_jmicron 0000:03:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 3.364437] pata_jmicron 0000:03:00.1: setting latency timer to 64 [ 3.364656] scsi0 : pata_jmicron [ 3.364779] scsi1 : pata_jmicron [ 3.365669] ata1: PATA max UDMA/100 cmd 0xac00 ctl 0xa880 bmdma 0xa400 irq 17 [ 3.365672] ata2: PATA max UDMA/100 cmd 0xa800 ctl 0xa480 bmdma 0xa408 irq 17 [ 3.370125] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 3.372652] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 3.372687] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.372690] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.372692] usb usb2: Product: EHCI Host Controller [ 3.372695] usb usb2: Manufacturer: Linux 2.6.30-1-amd64 ehci_hcd [ 3.372697] usb usb2: SerialNumber: 0000:00:1d.7 [ 3.372764] usb usb2: configuration #1 chosen from 1 choice [ 3.372797] hub 2-0:1.0: USB hub found [ 3.372804] hub 2-0:1.0: 6 ports detected [ 3.372937] 8139cp 0000:05:03.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too [ 3.378028] ata_piix 0000:00:1f.2: version 2.13 [ 3.378046] alloc irq_desc for 19 on cpu 0 node 0 [ 3.378048] alloc kstat_irqs on cpu 0 node 0 [ 3.378057] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 3.378062] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 3.425799] uhci_hcd: USB Universal Host Controller Interface driver [ 3.472906] ahci 0000:03:00.0: version 3.0 [ 3.472926] ahci 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3.488151] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 3.488156] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part [ 3.488163] ahci 0000:03:00.0: setting latency timer to 64 [ 3.488425] scsi2 : ahci [ 3.488575] scsi3 : ahci [ 3.488673] ata3: SATA max UDMA/133 abar m8192@0xff6fe000 port 0xff6fe100 irq 16 [ 3.488677] ata4: SATA max UDMA/133 abar m8192@0xff6fe000 port 0xff6fe180 irq 16 [ 3.532084] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 3.532159] scsi4 : ata_piix [ 3.532262] scsi5 : ata_piix [ 3.534578] ata5: SATA max UDMA/133 cmd 0xe880 ctl 0xe800 bmdma 0xe080 irq 19 [ 3.534584] ata6: SATA max UDMA/133 cmd 0xe480 ctl 0xe400 bmdma 0xe088 irq 19 [ 3.534683] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3.534690] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 3.534694] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 3.534785] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 3.534811] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000d880 [ 3.534855] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.534858] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.534860] usb usb3: Product: UHCI Host Controller [ 3.534863] usb usb3: Manufacturer: Linux 2.6.30-1-amd64 uhci_hcd [ 3.534865] usb usb3: SerialNumber: 0000:00:1a.0 [ 3.534918] usb usb3: configuration #1 chosen from 1 choice [ 3.534951] hub 3-0:1.0: USB hub found [ 3.534960] hub 3-0:1.0: 2 ports detected [ 3.535158] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 3.535163] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] [ 3.535212] ata_piix 0000:00:1f.5: setting latency timer to 64 [ 3.535249] scsi6 : ata_piix [ 3.535359] scsi7 : ata_piix [ 3.536866] ata7: SATA max UDMA/133 cmd 0xd080 ctl 0xd000 bmdma 0xc800 irq 19 [ 3.536872] ata8: SATA max UDMA/133 cmd 0xcc00 ctl 0xc880 bmdma 0xc808 irq 19 [ 3.537772] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 3.537780] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 3.537784] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 3.537860] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 3.537887] uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000dc00 [ 3.537934] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.537937] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.537939] usb usb4: Product: UHCI Host Controller [ 3.537941] usb usb4: Manufacturer: Linux 2.6.30-1-amd64 uhci_hcd [ 3.537943] usb usb4: SerialNumber: 0000:00:1a.1 [ 3.538005] usb usb4: configuration #1 chosen from 1 choice [ 3.538040] hub 4-0:1.0: USB hub found [ 3.538048] hub 4-0:1.0: 2 ports detected [ 3.538248] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 3.538254] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 3.538258] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 3.538314] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 3.538338] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d400 [ 3.538380] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.538383] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.538385] usb usb5: Product: UHCI Host Controller [ 3.538388] usb usb5: Manufacturer: Linux 2.6.30-1-amd64 uhci_hcd [ 3.538390] usb usb5: SerialNumber: 0000:00:1d.0 [ 3.538439] usb usb5: configuration #1 chosen from 1 choice [ 3.538469] hub 5-0:1.0: USB hub found [ 3.538477] hub 5-0:1.0: 2 ports detected [ 3.538667] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 3.538673] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 3.538676] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 3.538735] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 3.538761] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d480 [ 3.538809] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.538812] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.538814] usb usb6: Product: UHCI Host Controller [ 3.538816] usb usb6: Manufacturer: Linux 2.6.30-1-amd64 uhci_hcd [ 3.538818] usb usb6: SerialNumber: 0000:00:1d.1 [ 3.538867] usb usb6: configuration #1 chosen from 1 choice [ 3.538898] hub 6-0:1.0: USB hub found [ 3.538904] hub 6-0:1.0: 2 ports detected [ 3.539090] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 3.539097] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 3.539100] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 3.539158] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 3.539181] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d800 [ 3.539220] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.539223] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.539225] usb usb7: Product: UHCI Host Controller [ 3.539227] usb usb7: Manufacturer: Linux 2.6.30-1-amd64 uhci_hcd [ 3.539229] usb usb7: SerialNumber: 0000:00:1d.2 [ 3.539277] usb usb7: configuration #1 chosen from 1 choice [ 3.539308] hub 7-0:1.0: USB hub found [ 3.539315] hub 7-0:1.0: 2 ports detected [ 3.544754] ata1.00: ATA-7: WDC WD5000AAKB-00UKA0, 07.01N01, max UDMA/100 [ 3.544758] ata1.00: 976773168 sectors, multi 0: LBA48 [ 3.553427] ata1.01: ATA-7: WDC WD5000AAKB-00UKA0, 07.01N01, max UDMA/100 [ 3.553431] ata1.01: 976773168 sectors, multi 0: LBA48 [ 3.569264] ata1.00: configured for UDMA/100 [ 3.582927] Uniform Multi-Platform E-IDE driver [ 3.584951] ata1.01: configured for UDMA/100 [ 3.585060] scsi 0:0:0:0: Direct-Access ATA WDC WD5000AAKB-0 07.0 PQ: 0 ANSI: 5 [ 3.585249] scsi 0:0:1:0: Direct-Access ATA WDC WD5000AAKB-0 07.0 PQ: 0 ANSI: 5 [ 3.808048] ata3: SATA link down (SStatus 0 SControl 300) [ 3.820045] ata4: SATA link down (SStatus 0 SControl 300) [ 3.848028] usb 5-2: new low speed USB device using uhci_hcd and address 2 [ 3.866640] ata7: SATA link down (SStatus 0 SControl 300) [ 4.021369] usb 5-2: New USB device found, idVendor=046a, idProduct=0102 [ 4.021372] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.021375] usb 5-2: Product: wireless mouse [ 4.021378] usb 5-2: Manufacturer: MLK [ 4.021448] usb 5-2: configuration #1 chosen from 1 choice [ 4.152032] usb 6-2: new low speed USB device using uhci_hcd and address 2 [ 4.312797] usb 6-2: New USB device found, idVendor=046a, idProduct=0050 [ 4.312801] usb 6-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.312886] usb 6-2: configuration #1 chosen from 1 choice [ 4.320810] usbcore: registered new interface driver hiddev [ 4.332126] ata5.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 4.332138] ata5.01: SATA link down (SStatus 4 SControl 300) [ 4.343884] input: MLK wireless mouse as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.0/input/input1 [ 4.344001] generic-usb 0003:046A:0102.0001: input,hiddev96,hidraw0: USB HID v1.10 Mouse [MLK wireless mouse] on usb-0000:00:1d.0-2/input0 [ 4.358106] input: HID 046a:0050 as /devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2:1.0/input/input2 [ 4.358150] generic-usb 0003:046A:0050.0002: input,hidraw1: USB HID v1.11 Keyboard [HID 046a:0050] on usb-0000:00:1d.1-2/input0 [ 4.381906] input: HID 046a:0050 as /devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2:1.1/input/input3 [ 4.381946] generic-usb 0003:046A:0050.0003: input,hidraw2: USB HID v1.11 Device [HID 046a:0050] on usb-0000:00:1d.1-2/input1 [ 4.387164] ata5.00: ATA-7: ST3500630AS, 3.AAK, max UDMA/133 [ 4.387168] ata5.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 4.398100] input: HID 046a:0050 as /devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2:1.2/input/input4 [ 4.398161] generic-usb 0003:046A:0050.0004: input,hidraw3: USB HID v1.11 Mouse [HID 046a:0050] on usb-0000:00:1d.1-2/input2 [ 4.398180] usbcore: registered new interface driver usbhid [ 4.398182] usbhid: v2.6:USB HID core driver [ 4.453826] ata5.00: configured for UDMA/133 [ 4.453949] scsi 4:0:0:0: Direct-Access ATA ST3500630AS 3.AA PQ: 0 ANSI: 5 [ 5.102638] ata6.00: SATA link down (SStatus 0 SControl 300) [ 5.102647] ata6.01: SATA link down (SStatus 4 SControl 300) [ 5.430594] ata8: SATA link down (SStatus 0 SControl 300) [ 5.435332] alloc irq_desc for 20 on cpu 0 node 0 [ 5.435336] alloc kstat_irqs on cpu 0 node 0 [ 5.435345] firewire_ohci 0000:05:01.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 5.439782] 8139too Fast Ethernet driver 0.9.28 [ 5.454285] Driver 'sd' needs updating - please use bus_type methods [ 5.454428] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors: (500 GB/465 GiB) [ 5.454443] sd 0:0:0:0: [sda] Write Protect is off [ 5.454446] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.454469] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.454565] sda:<5>sd 4:0:0:0: [sdc] 976773168 512-byte hardware sectors: (500 GB/465 GiB) [ 5.454754] sd 4:0:0:0: [sdc] Write Protect is off [ 5.454757] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 5.454779] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.454860] sdc:<5>sd 0:0:1:0: [sdb] 976773168 512-byte hardware sectors: (500 GB/465 GiB) [ 5.457636] sd 0:0:1:0: [sdb] Write Protect is off [ 5.457639] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 5.457663] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.457776] sdb: sda1 [ 5.458006] sd 0:0:0:0: [sda] Attached SCSI disk [ 5.466282] sdb1 [ 5.466431] sd 0:0:1:0: [sdb] Attached SCSI disk [ 5.467977] sdc1 sdc2 sdc3 [ 5.468174] sd 4:0:0:0: [sdc] Attached SCSI disk [ 5.504117] firewire_ohci: Added fw-ohci device 0000:05:01.0, OHCI version 1.10 [ 5.504537] 8139too 0000:05:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 5.505479] eth1: RealTek RTL8139 at 0xffffc2001167e400, 00:e0:7d:c5:d2:13, IRQ 16 [ 5.505482] eth1: Identified 8139 chip type 'RTL-8139C' [ 5.716464] device-mapper: uevent: version 1.0.3 [ 5.716674] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com [ 5.907131] kjournald starting. Commit interval 5 seconds [ 5.907141] EXT3-fs: mounted filesystem with ordered data mode. [ 6.008123] firewire_core: created device fw0: GUID 0011d80000e0a234, S400 [ 7.314179] udev: starting version 141 [ 7.526354] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5 [ 7.526363] ACPI: Power Button [PWRF] [ 7.526462] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input6 [ 7.526466] ACPI: Power Button [PWRB] [ 7.601660] ACPI: SSDT 00000000af7a00f0 001C6 (v01 AMI CPU1PM 00000001 INTL 20060113) [ 7.602004] processor ACPI_CPU:00: registered as cooling_device0 [ 7.602347] ACPI: SSDT 00000000af7a02c0 0013A (v01 AMI CPU2PM 00000001 INTL 20060113) [ 7.602827] processor ACPI_CPU:01: registered as cooling_device1 [ 8.260986] input: PC Speaker as /devices/platform/pcspkr/input/input7 [ 8.289211] parport_pc 00:0b: reported by Plug and Play ACPI [ 8.289314] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP] [ 8.357527] i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003) [ 8.357535] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 8.506754] alloc irq_desc for 22 on cpu 0 node 0 [ 8.506757] alloc kstat_irqs on cpu 0 node 0 [ 8.506766] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 8.506820] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 8.922835] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8 [ 11.876775] EXT3 FS on dm-0, internal journal [ 11.977390] loop: module loaded [ 12.063832] w83627ehf: Found W83627DHG chip at 0x290 [ 12.076030] coretemp coretemp.0: Using relative temperature scale! [ 12.076112] coretemp coretemp.1: Using relative temperature scale! [ 13.042611] kjournald starting. Commit interval 5 seconds [ 13.042854] EXT3 FS on dm-4, internal journal [ 13.042859] EXT3-fs: mounted filesystem with ordered data mode. [ 13.052744] kjournald starting. Commit interval 5 seconds [ 13.052950] EXT3 FS on dm-3, internal journal [ 13.052954] EXT3-fs: mounted filesystem with ordered data mode. [ 13.068383] kjournald starting. Commit interval 5 seconds [ 13.068639] EXT3 FS on dm-1, internal journal [ 13.068643] EXT3-fs: mounted filesystem with ordered data mode. [ 13.069594] kjournald starting. Commit interval 5 seconds [ 13.069872] EXT3 FS on dm-2, internal journal [ 13.069876] EXT3-fs: mounted filesystem with ordered data mode. [ 13.274801] Adding 1535992k swap on /dev/mapper/vonNeumann-swap. Priority:-1 extents:1 across:1535992k [ 15.250993] fuse init (API version 7.11) [ 16.216776] r8169: eth0: link up [ 16.216784] r8169: eth0: link up [ 26.232007] eth0: no IPv6 routers present [ 31.996656] [drm] Initialized drm 1.1.0 20060810 [ 32.015442] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 32.015448] pci 0000:00:02.0: setting latency timer to 64 [ 32.027806] alloc irq_desc for 29 on cpu 0 node 0 [ 32.027811] alloc kstat_irqs on cpu 0 node 0 [ 32.027823] pci 0000:00:02.0: irq 29 for MSI/MSI-X [ 32.027970] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xc301df06 Device Boot Start End Blocks Id System /dev/sda1 * 1 244 1959898+ 83 Linux /dev/sda2 * 245 6081 46885702+ 8e Linux LVM /dev/sda3 6082 60801 439538400 83 Linux Disk /dev/hda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xac9d04e6 Device Boot Start End Blocks Id System /dev/hda1 1 60801 488384001 83 Linux Disk /dev/hdb: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/hdb1 1 60801 488384001 83 LinuxDisk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xac9d04e6 Device Boot Start End Blocks Id System /dev/sda1 1 60801 488384001 83 Linux Disk /dev/sdb: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdb1 1 60801 488384001 83 Linux Disk /dev/sdc: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xc301df06 Device Boot Start End Blocks Id System /dev/sdc1 * 1 244 1959898+ 83 Linux /dev/sdc2 * 245 6081 46885702+ 8e Linux LVM /dev/sdc3 6082 60801 439538400 83 LinuxAttachment: signature.asc
Description: This is a digitally signed message part.
--- End Message ---
--- Begin Message ---
- To: Karl Ferdinand Ebert <kfebert@gmail.com>, 536324-done@bugs.debian.org
- Subject: Re: Bug#536324: [linux-image-2.6.30-1] hard disk numbering is partially changed from IDE to SATA
- From: Steve Langasek <vorlon@debian.org>
- Date: Thu, 9 Jul 2009 00:43:21 -0700
- Message-id: <20090709074321.GA22208@dario.dodds.net>
- In-reply-to: <[🔎] 200907090758.24728.kfebert@gmail.com>
- References: <[🔎] 200907090758.24728.kfebert@gmail.com>
On Thu, Jul 09, 2009 at 07:58:20AM +0200, Karl Ferdinand Ebert wrote: > Package: linux-image-2.6.30-1 > Severity: grave > A system I manage has three disks (1x SATA, 2x IDE) under the old kernel > 2.6.29 this has been: sda,hda and hdb (details in appendix). But with the > 2.6.30 kernel this changes wrongily to 3 SATA devices and no partioning scheme > is temporily lost (unless I start with the old kernel). Therefore I cannot > access my data. Device names are not guaranteed to be stable, and the change from hd* to sd* is a deliberate change as part of the ongoing transition between disk subsystems. There is no bug here. -- Steve Langasek Give me a lever long enough and a Free OS Debian Developer to set it on, and I can move the world. Ubuntu Developer http://www.debian.org/ slangasek@ubuntu.com vorlon@debian.org
--- End Message ---