| Package: linux-image-2.6.26-1-686 Version: 2.6.26-13 I see similar problem, when connecting my SE phone first time, everything is working. But second time i connect the phone is not seen by my app. following time it is often not even noted in the logs. And i see the [sdc] READ CAPACITY failed [sdc] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK rmmod -v ehci_hcd ; modprobe -v ehci_hcd Jul 3 11:07:31 dustpuppy kernel: [195653.150198] ehci_hcd 0000:00:1d.7: remove, state 1 Jul 3 11:07:31 dustpuppy kernel: [195653.150211] usb usb2: USB disconnect, address 1 Jul 3 11:07:31 dustpuppy kernel: [195653.150214] usb 2-2: USB disconnect, address 2 Jul 3 11:07:31 dustpuppy kernel: [195653.151917] usb 2-6: USB disconnect, address 3 Jul 3 11:07:31 dustpuppy kernel: [195653.156048] ehci_hcd 0000:00:1d.7: USB bus 2 deregistered Jul 3 11:07:31 dustpuppy kernel: [195653.247252] ACPI: PCI interrupt for device 0000:00:1d.7 disabled Jul 3 11:07:31 dustpuppy kernel: [195653.247405] ehci_hcd 0000:00:1a.7: remove, state 4 Jul 3 11:07:31 dustpuppy kernel: [195653.247413] usb usb1: USB disconnect, address 1 Jul 3 11:07:31 dustpuppy kernel: [195653.251583] ehci_hcd 0000:00:1a.7: USB bus 1 deregistered Jul 3 11:07:32 dustpuppy kernel: [195653.486656] usb 7-2: new full speed USB device using uhci_hcd and address 3 Jul 3 11:07:32 dustpuppy kernel: [195653.638874] usb 7-2: configuration #1 chosen from 1 choice Jul 3 11:07:32 dustpuppy kernel: [195653.645928] hub 7-2:1.0: USB hub found Jul 3 11:07:32 dustpuppy kernel: [195653.648021] hub 7-2:1.0: 4 ports detected Jul 3 11:07:32 dustpuppy kernel: [195653.766786] usb 7-2: New USB device found, idVendor=0424, idProduct=2504 Jul 3 11:07:32 dustpuppy kernel: [195653.766792] usb 7-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 Jul 3 11:07:32 dustpuppy kernel: [195654.104419] usb 5-2: new full speed USB device using uhci_hcd and address 3 Jul 3 11:07:32 dustpuppy kernel: [195654.390090] usb 5-2: configuration #1 chosen from 1 choice Jul 3 11:07:32 dustpuppy kernel: [195654.395569] scsi9 : SCSI emulation for USB Mass Storage devices Jul 3 11:07:32 dustpuppy kernel: [195654.395569] usb 5-2: New USB device found, idVendor=0644, idProduct=0200 Jul 3 11:07:32 dustpuppy kernel: [195654.395569] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Jul 3 11:07:32 dustpuppy kernel: [195654.395569] usb 5-2: Product: CA-200 Jul 3 11:07:32 dustpuppy kernel: [195654.395569] usb 5-2: Manufacturer: TEAC Jul 3 11:07:32 dustpuppy kernel: [195654.395569] usb 5-2: SerialNumber: 00000702D958 Jul 3 11:07:32 dustpuppy kernel: [195654.395569] ACPI: PCI interrupt for device 0000:00:1a.7 disabled Jul 3 11:07:32 dustpuppy kernel: [195654.465986] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 22 Jul 3 11:07:32 dustpuppy kernel: [195654.465986] ehci_hcd 0000:00:1a.7: EHCI Host Controller Jul 3 11:07:32 dustpuppy kernel: [195654.465986] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 Jul 3 11:07:32 dustpuppy kernel: [195654.469984] ehci_hcd 0000:00:1a.7: debug port 1 Jul 3 11:07:32 dustpuppy kernel: [195654.469995] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfe9d9c00 Jul 3 11:07:32 dustpuppy kernel: [195654.473843] usb 3-1: USB disconnect, address 4 Jul 3 11:07:32 dustpuppy kernel: [195654.482705] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 Jul 3 11:07:32 dustpuppy kernel: [195654.482787] usb usb1: configuration #1 chosen from 1 choice Jul 3 11:07:32 dustpuppy kernel: [195654.482825] hub 1-0:1.0: USB hub found Jul 3 11:07:32 dustpuppy kernel: [195654.482834] hub 1-0:1.0: 6 ports detected Jul 3 11:07:33 dustpuppy kernel: [195654.597151] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 Jul 3 11:07:33 dustpuppy kernel: [195654.597158] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jul 3 11:07:33 dustpuppy kernel: [195654.597161] usb usb1: Product: EHCI Host Controller Jul 3 11:07:33 dustpuppy kernel: [195654.597166] usb usb1: Manufacturer: Linux 2.6.26-2-686 ehci_hcd Jul 3 11:07:33 dustpuppy kernel: [195654.597171] usb usb1: SerialNumber: 0000:00:1a.7 Jul 3 11:07:33 dustpuppy kernel: [195654.597204] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23 Jul 3 11:07:33 dustpuppy kernel: [195654.597236] ehci_hcd 0000:00:1d.7: EHCI Host Controller Jul 3 11:07:33 dustpuppy kernel: [195654.666065] usb 3-2: USB disconnect, address 5 Jul 3 11:07:33 dustpuppy kernel: [195654.817748] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 Jul 3 11:07:33 dustpuppy kernel: [195654.823668] ehci_hcd 0000:00:1d.7: debug port 1 Jul 3 11:07:33 dustpuppy kernel: [195654.823668] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xff980800 Jul 3 11:07:33 dustpuppy kernel: [195654.839669] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 Jul 3 11:07:33 dustpuppy kernel: [195655.559637] usb 3-1: new low speed USB device using uhci_hcd and address 6 Jul 3 11:07:34 dustpuppy kernel: [195655.784237] usb 3-1: configuration #1 chosen from 1 choice Jul 3 11:07:34 dustpuppy kernel: [195655.786255] input: Wacom Graphire3 6x8 as /class/input/input7 Jul 3 11:07:34 dustpuppy kernel: [195655.831373] usb 3-1: New USB device found, idVendor=056a, idProduct=0014 Jul 3 11:07:34 dustpuppy kernel: [195655.831373] usb 3-1: New USB device strings: Mfr=1, Product=5, SerialNumber=0 Jul 3 11:07:34 dustpuppy kernel: [195655.831373] usb 3-1: Product: CTE-630-UV3.1-4 Jul 3 11:07:34 dustpuppy kernel: [195655.831373] usb 3-1: Manufacturer: WACOM Jul 3 11:07:34 dustpuppy logger: device 3-1:1.0 is bound to the wacom driver Jul 3 11:07:34 dustpuppy logger: no need to rebind Jul 3 11:07:34 dustpuppy kernel: [195656.098762] usb 3-2: new low speed USB device using uhci_hcd and address 7 Jul 3 11:07:34 dustpuppy kernel: [195656.326273] usb 3-2: configuration #1 chosen from 1 choice Jul 3 11:07:34 dustpuppy kernel: [195656.355140] input: Dell Dell USB Keyboard as /class/input/input8 Jul 3 11:07:34 dustpuppy kernel: [195656.382600] input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1a.0-2 Jul 3 11:07:34 dustpuppy kernel: [195656.385890] usb 3-2: New USB device found, idVendor=413c, idProduct=2003 Jul 3 11:07:34 dustpuppy kernel: [195656.385893] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 Jul 3 11:07:34 dustpuppy kernel: [195656.385897] usb 3-2: Product: Dell USB Keyboard Jul 3 11:07:34 dustpuppy kernel: [195656.385899] usb 3-2: Manufacturer: Dell Jul 3 11:07:34 dustpuppy kernel: [195656.385921] usb 7-2: USB disconnect, address 3 Jul 3 11:07:34 dustpuppy kernel: [195656.555321] usb 5-2: USB disconnect, address 3 Jul 3 11:07:34 dustpuppy kernel: [195656.729947] usb usb2: configuration #1 chosen from 1 choice Jul 3 11:07:34 dustpuppy kernel: [195656.729947] hub 2-0:1.0: USB hub found Jul 3 11:07:34 dustpuppy kernel: [195656.729947] hub 2-0:1.0: 6 ports detected Jul 3 11:07:34 dustpuppy kernel: [195656.880669] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 Jul 3 11:07:34 dustpuppy kernel: [195656.880675] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jul 3 11:07:34 dustpuppy kernel: [195656.880679] usb usb2: Product: EHCI Host Controller Jul 3 11:07:34 dustpuppy kernel: [195656.880683] usb usb2: Manufacturer: Linux 2.6.26-2-686 ehci_hcd Jul 3 11:07:34 dustpuppy kernel: [195656.880688] usb usb2: SerialNumber: 0000:00:1d.7 Jul 3 11:07:35 dustpuppy kernel: [195657.149391] usb 2-2: new high speed USB device using ehci_hcd and address 2 Jul 3 11:07:35 dustpuppy kernel: [195657.365527] usb 2-2: configuration #1 chosen from 1 choice Jul 3 11:07:35 dustpuppy kernel: [195657.365527] scsi10 : SCSI emulation for USB Mass Storage devices Jul 3 11:07:35 dustpuppy kernel: [195657.365527] usb 2-2: New USB device found, idVendor=0644, idProduct=0200 Jul 3 11:07:35 dustpuppy kernel: [195657.365527] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Jul 3 11:07:35 dustpuppy kernel: [195657.365527] usb 2-2: Product: CA-200 Jul 3 11:07:35 dustpuppy kernel: [195657.365527] usb 2-2: Manufacturer: TEAC Jul 3 11:07:35 dustpuppy kernel: [195657.365527] usb 2-2: SerialNumber: 00000702D958 Jul 3 11:07:35 dustpuppy kernel: [195657.679844] usb 2-6: new high speed USB device using ehci_hcd and address 3 Jul 3 11:07:35 dustpuppy kernel: [195657.824537] usb 2-6: configuration #1 chosen from 1 choice Jul 3 11:07:35 dustpuppy kernel: [195657.828110] hub 2-6:1.0: USB hub found Jul 3 11:07:35 dustpuppy kernel: [195657.828110] hub 2-6:1.0: 4 ports detected Jul 3 11:07:35 dustpuppy kernel: [195657.938564] usb 2-6: New USB device found, idVendor=0424, idProduct=2504 Jul 3 11:07:35 dustpuppy kernel: [195657.938573] usb 2-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0 Jul 3 11:07:40 dustpuppy kernel: [195663.209812] scsi 10:0:0:0: Direct-Access TEAC USB HS-CF Card 4.08 PQ: 0 ANSI: 0 Jul 3 11:07:40 dustpuppy kernel: [195663.213553] scsi 10:0:0:1: Direct-Access TEAC USB HS-xD/SM 4.08 PQ: 0 ANSI: 0 Jul 3 11:07:40 dustpuppy kernel: [195663.217262] scsi 10:0:0:2: Direct-Access TEAC USB HS-MS Card 4.08 PQ: 0 ANSI: 0 Jul 3 11:07:40 dustpuppy kernel: [195663.217262] scsi 10:0:0:3: Direct-Access TEAC USB HS-SD Card 4.08 PQ: 0 ANSI: 0 Jul 3 11:07:40 dustpuppy kernel: [195663.224799] sd 10:0:0:0: [sdc] Attached SCSI removable disk Jul 3 11:07:40 dustpuppy kernel: [195663.224850] sd 10:0:0:0: Attached scsi generic sg4 type 0 Jul 3 11:07:40 dustpuppy kernel: [195663.231594] sd 10:0:0:1: [sdd] Attached SCSI removable disk Jul 3 11:07:40 dustpuppy kernel: [195663.232592] sd 10:0:0:1: Attached scsi generic sg5 type 0 Jul 3 11:07:40 dustpuppy kernel: [195663.236592] sd 10:0:0:2: [sde] Attached SCSI removable disk Jul 3 11:07:40 dustpuppy kernel: [195663.236592] sd 10:0:0:2: Attached scsi generic sg6 type 0 Jul 3 11:07:40 dustpuppy kernel: [195663.243553] sd 10:0:0:3: [sdf] Attached SCSI removable disk Jul 3 11:07:40 dustpuppy kernel: [195663.243603] sd 10:0:0:3: Attached scsi generic sg7 type 0 Jul 3 11:08:45 dustpuppy kernel: [195743.805929] usb 2-6.3: configuration #3 chosen from 1 choice Jul 3 11:08:45 dustpuppy kernel: [195743.807525] cdc_acm 2-6.3:3.1: ttyACM0: USB ACM device Jul 3 11:08:45 dustpuppy kernel: [195743.809315] cdc_acm 2-6.3:3.3: ttyACM1: USB ACM device Jul 3 11:08:45 dustpuppy kernel: [195743.817193] usb0: register 'cdc_ether' at usb-0000:00:1d.7-6.3, CDC Ethernet Device, 02:80:37:02:03:00 Jul 3 11:08:45 dustpuppy kernel: [195743.818626] usb 2-6.3: New USB device found, idVendor=0fce, idProduct=d0a1 Jul 3 11:08:45 dustpuppy kernel: [195743.818632] usb 2-6.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Jul 3 11:08:45 dustpuppy kernel: [195743.818635] usb 2-6.3: Product: Sony Ericsson K810 Jul 3 11:08:45 dustpuppy kernel: [195743.818638] usb 2-6.3: Manufacturer: Sony Ericsson Jul 3 11:08:45 dustpuppy kernel: [195743.818641] usb 2-6.3: SerialNumber: 3579940102131410 Jul 3 11:08:51 dustpuppy kernel: [195751.416698] disabled, if problems are found, by specifying the nounix mount option. Jul 3 11:09:06 dustpuppy kernel: [195770.688050] usb0: unregister 'cdc_ether' usb-0000:00:1d.7-6.3, CDC Ethernet Device Jul 3 11:10:57 dustpuppy kernel: [195903.924042] usb 2-6.3: new full speed USB device using ehci_hcd and address 5 Jul 3 11:10:57 dustpuppy kernel: [195904.111763] usb 2-6.3: configuration #3 chosen from 1 choice Jul 3 11:10:57 dustpuppy kernel: [195904.120227] cdc_acm 2-6.3:3.1: ttyACM0: USB ACM device Jul 3 11:10:57 dustpuppy kernel: [195904.131764] cdc_acm 2-6.3:3.3: ttyACM1: USB ACM device Jul 3 11:10:57 dustpuppy kernel: [195904.159790] usb0: register 'cdc_ether' at usb-0000:00:1d.7-6.3, CDC Ethernet Device, 02:80:37:02:03:00 Jul 3 11:10:57 dustpuppy kernel: [195904.163791] usb 2-6.3: New USB device found, idVendor=0fce, idProduct=d0a1 Jul 3 11:10:57 dustpuppy kernel: [195904.163791] usb 2-6.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Jul 3 11:10:57 dustpuppy kernel: [195904.163791] usb 2-6.3: Product: Sony Ericsson K810 Jul 3 11:10:57 dustpuppy kernel: [195904.163791] usb 2-6.3: Manufacturer: Sony Ericsson Jul 3 11:10:57 dustpuppy kernel: [195904.163791] usb 2-6.3: SerialNumber: 3579940102131410 Jul 3 11:11:03 dustpuppy kernel: [195911.536949] disabled, if problems are found, by specifying the nounix mount option. Jul 3 11:11:07 dustpuppy kernel: [195916.859550] usb0: unregister 'cdc_ether' usb-0000:00:1d.7-6.3, CDC Ethernet Device Jul 3 11:12:43 dustpuppy kernel: [196034.829065] usb 2-6.3: new full speed USB device using ehci_hcd and address 6 Architecture: i386 Kernel: Linux 2.6.26-2-686 650 testing security.debian.org 650 testing ftp.dk.debian.org 650 testing ftp.debian.org 650 testing debian.uni-c.dk 650 testing debian.three-dimensional.net 600 unstable ftp.dk.debian.org 600 unstable ftp.debian.org 600 unstable debian.uni-c.dk 600 unstable debian.three-dimensional.net Depends (Version) | Installed =====================================-+-============= module-init-tools | 3.7-pre9-1 initramfs-tools (>= 0.55) | 0.93.3 OR yaird (>= 0.0.13) | OR linux-initramfs-tool | =========================-+-=========== libc6-i686 | 2.9-12 ===============================-+-=========== linux-doc-2.6.26 | grub | 0.97-53 OR lilo | -- Med venlig hilsen / Mojn / Best regards Opensource Software Specialist Alsion 2 DK-6400 Sønderborg Dir.: +45 7347 7017 Mail: mah@cfsi.dk Web : www.cfsi.dk Windows Embedded Standard (XP embedded) – Jump Start |