[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#498271: marked as done (linux-image-2.6.26-1-amd64: the SATA CDROM isn't detected)

Your message dated Sat, 27 Jun 2009 16:04:53 +0000
with message-id <E1MKaOb-00018z-HP@ries.debian.org>
and subject line Bug#498271: fixed in user-mode-linux 2.6.26-1um-2+16
has caused the Debian Bug report #498271,
regarding linux-image-2.6.26-1-amd64: the SATA CDROM isn't detected
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
498271: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=498271
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message --- 
Subject: linux-image-2.6.26-1-amd64: the SATA CDROM isn't detected
Package: linux-image-2.6.26-1-amd64
Version: 2.6.26-4
Severity: important

*** Please type your report below this line ***

I get errors shown in the kernel log and can't access the CD-ROM.
I think this not a Debian specific problem because I have this error
with a "stock" 2.6.26.3 kernel (from ftp.kernel.org) too. But I hadn't
this error with a 2.6.25 kernel.
Could it be a timing problem in sata_nv?

My MoBo is an Asus M2N32 WS Professional with these storage controlers
(short form, long form see below):
H/W path        Device      Class       Description
===================================================
/0/c                        storage     MCP55 IDE
/0/d            scsi0       storage     MCP55 SATA Controller
/0/d.1                      storage     MCP55 SATA Controller
/0/d.2                      storage     MCP55 SATA Controller
/0/16/0                     storage     88SE6145 SATA II PCI-E controller


-- Package-specific info:
** Version:
Linux version 2.6.26-1-amd64 (Debian 2.6.26-4) (waldi@debian.org) (gcc version 4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 SMP Thu Aug 28 11:13:42 UTC 2008

** Command line:
BOOT_IMAGE=/vmlinuz-2.6.26-1-amd64 root=UUID=7e37e815-ca3c-4ce5-9987-88eef03937b4 ro

** Not tainted

** Kernel log:
[    1.598100] sata_nv 0000:00:0d.0: version 3.5
[    1.598100] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21
[    1.598100] ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [APSI] -> GSI 21 (level, low) -> IRQ 21
[    1.598100] sata_nv 0000:00:0d.0: Using SWNCQ mode
[    1.598100] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[    1.598100] scsi0 : sata_nv
[    1.598100] scsi1 : sata_nv
[    1.598100] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xe000 irq 21
[    1.598100] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xe008 irq 21
[    1.924441] usb 2-2: new low speed USB device using ohci_hcd and address 2
[    2.093397] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.101336] ata1.00: ATA-7: SAMSUNG HD103UJ, 1AA01112, max UDMA7
[    2.101336] ata1.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 31/32)
[    2.101336] ata1.00: Drive reports diagnostics failure. This may indicate a drive
[    2.101336] ata1.00: fault or invalid emulation. Contact drive vendor for information.
[    2.118606] ata1.00: configured for UDMA/133
[    2.154069] usb 2-2: configuration #1 chosen from 1 choice
[    2.154069] usb 2-2: New USB device found, idVendor=046d, idProduct=c501
[    2.154069] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.154069] usb 2-2: Product: USB Receiver
[    2.154069] usb 2-2: Manufacturer: Logitech
[    9.729091] ata2: link is slow to respond, please be patient (ready=-19)
[   16.654084] ata2: SRST failed (errno=-16)
[   24.158262] ata2: link is slow to respond, please be patient (ready=-19)
[   31.138728] ata2: SRST failed (errno=-16)
[   38.146731] ata2: link is slow to respond, please be patient (ready=-19)
[   79.491224] ata2: SRST failed (errno=-16)
[   79.491299] ata2: limiting SATA link speed to 1.5 Gbps
[   86.927693] ata2: SRST failed (errno=-16)
[   86.927766] ata2: reset failed, giving up

** Loaded modules:
Module                  Size  Used by
ext2                   66448  0 
usb_storage            94400  1 
wacom                  22144  0 
binfmt_misc            13580  1 
kvm_amd                29452  0 
kvm                   127464  1 kvm_amd
ppdev                  11656  0 
lp                     14724  0 
autofs4                24200  1 
video                  24084  0 
output                  7808  1 video
ac                      9352  0 
battery                16904  0 
cpufreq_stats           9120  0 
cpufreq_userspace       8452  0 
cpufreq_powersave       6400  0 
cpufreq_ondemand       11792  0 
cpufreq_conservative    11784  0 
freq_table              9344  2 cpufreq_stats,cpufreq_ondemand
nfsd                  248360  17 
auth_rpcgss            47520  1 nfsd
exportfs                8704  1 nfsd
nfs                   251696  1 
lockd                  68560  2 nfsd,nfs
nfs_acl                 7552  2 nfsd,nfs
sunrpc                197608  16 nfsd,auth_rpcgss,nfs,lockd,nfs_acl
ipv6                  288200  49 
fuse                   53184  1 
dm_multipath           21392  0 
loop                   19468  0 
snd_hda_intel         434776  1 
snd_pcsp               14588  0 
parport_pc             31016  1 
parport                41776  3 ppdev,lp,parport_pc
snd_pcm_oss            41760  0 
snd_mixer_oss          18816  1 snd_pcm_oss
snd_pcm                81800  3 snd_hda_intel,snd_pcsp,snd_pcm_oss
snd_timer              25744  1 snd_pcm
k8temp                  9216  0 
snd                    63688  8 snd_hda_intel,snd_pcsp,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
shpchp                 34080  0 
pci_hotplug            32056  1 shpchp
i2c_nforce2            10752  0 
soundcore              12064  1 snd
snd_page_alloc         13072  2 snd_hda_intel,snd_pcm
i2c_core               27936  1 i2c_nforce2
button                 11680  0 
evdev                  14208  3 
ext3                  124688  11 
jbd                    51240  1 ext3
mbcache                12804  2 ext2,ext3
dm_mirror              20608  0 
dm_log                 13956  1 dm_mirror
dm_snapshot            19400  0 
dm_mod                 58864  15 dm_multipath,dm_mirror,dm_log,dm_snapshot
raid10                 23680  0 
raid456               125984  0 
async_xor               8448  1 raid456
async_memcpy            6912  1 raid456
async_tx               11764  3 raid456,async_xor,async_memcpy
xor                     9744  2 raid456,async_xor
raid1                  24192  0 
raid0                  10624  0 
multipath              11392  0 
linear                  8960  0 
md_mod                 80164  6 raid10,raid456,raid1,raid0,multipath,linear
sd_mod                 29376  10 
pata_marvell            8832  0 
amd74xx                13448  0 [permanent]
usbhid                 45792  0 
hid                    41792  1 usbhid
ff_memless              9224  1 usbhid
ide_pci_generic         9220  0 [permanent]
ide_core              128284  2 amd74xx,ide_pci_generic
floppy                 61672  0 
ahci                   32520  0 
ohci1394               32564  0 
sata_nv                27528  9 
ata_generic            10116  0 
ieee1394               93816  1 ohci1394
libata                165472  4 pata_marvell,ahci,sata_nv,ata_generic
forcedeth              54032  0 
scsi_mod              160760  3 usb_storage,sd_mod,libata
dock                   14112  1 libata
ohci_hcd               25092  0 
ehci_hcd               36108  0 
thermal                22688  0 
processor              42304  1 thermal
fan                     9352  0 
thermal_sys            17728  4 video,thermal,processor,fan

** PCI devices:
00:00.0 RAM memory [0500]: nVidia Corporation C51 Host Bridge [10de:02f4] (rev a2)
	Subsystem: ASUSTeK Computer Inc. Device [1043:81fc]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>

00:00.1 RAM memory [0500]: nVidia Corporation C51 Memory Controller 0 [10de:02fa] (rev a2)
	Subsystem: ASUSTeK Computer Inc. Device [1043:81fc]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR+ <PERR- INTx-

00:00.2 RAM memory [0500]: nVidia Corporation C51 Memory Controller 1 [10de:02fe] (rev a2)
	Subsystem: ASUSTeK Computer Inc. Device [1043:81fc]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:00.3 RAM memory [0500]: nVidia Corporation C51 Memory Controller 5 [10de:02f8] (rev a2)
	Subsystem: ASUSTeK Computer Inc. Device [1043:81fc]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:00.4 RAM memory [0500]: nVidia Corporation C51 Memory Controller 4 [10de:02f9] (rev a2)
	Subsystem: ASUSTeK Computer Inc. Device [1043:81fc]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0

00:00.5 RAM memory [0500]: nVidia Corporation C51 Host Bridge [10de:02ff] (rev a2)
	Subsystem: ASUSTeK Computer Inc. Device [1043:81fc]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>

00:00.6 RAM memory [0500]: nVidia Corporation C51 Memory Controller 3 [10de:027f] (rev a2)
	Subsystem: ASUSTeK Computer Inc. Device [1043:81fc]
	Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:00.7 RAM memory [0500]: nVidia Corporation C51 Memory Controller 2 [10de:027e] (rev a2)
	Subsystem: ASUSTeK Computer Inc. Device [1043:81fc]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:04.0 PCI bridge [0604]: nVidia Corporation C51 PCI Express Bridge [10de:02fb] (rev a1)
	Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport-driver
	Kernel modules: shpchp

00:08.0 RAM memory [0500]: nVidia Corporation MCP55 Memory Controller [10de:0369] (rev a1)
	Subsystem: nVidia Corporation Device [10de:cb84]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>

00:09.0 ISA bridge [0601]: nVidia Corporation MCP55 LPC Bridge [10de:0360] (rev a2)
	Subsystem: ASUSTeK Computer Inc. Device [1043:81fb]
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0

00:09.1 SMBus [0c05]: nVidia Corporation MCP55 SMBus [10de:0368] (rev a2)
	Subsystem: ASUSTeK Computer Inc. Device [1043:81fb]
	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin A routed to IRQ 5
	Region 4: I/O ports at 1c00 [size=64]
	Region 5: I/O ports at 1c40 [size=64]
	Capabilities: <access denied>
	Kernel driver in use: nForce2_smbus
	Kernel modules: i2c-nforce2

00:0a.0 USB Controller [0c03]: nVidia Corporation MCP55 USB Controller [10de:036c] (rev a1) (prog-if 10)
	Subsystem: ASUSTeK Computer Inc. Device [1043:81fb]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (750ns min, 250ns max)
	Interrupt: pin A routed to IRQ 22
	Region 0: Memory at fe02f000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: ohci_hcd
	Kernel modules: ohci-hcd

00:0a.1 USB Controller [0c03]: nVidia Corporation MCP55 USB Controller [10de:036d] (rev a2) (prog-if 20)
	Subsystem: ASUSTeK Computer Inc. Device [1043:81fb]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (750ns min, 250ns max)
	Interrupt: pin B routed to IRQ 23
	Region 0: Memory at fe02e000 (32-bit, non-prefetchable) [size=256]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd
	Kernel modules: ehci-hcd

00:0c.0 IDE interface [0101]: nVidia Corporation MCP55 IDE [10de:036e] (rev a1) (prog-if 8a [Master SecP PriP])
	Subsystem: ASUSTeK Computer Inc. Device [1043:81fb]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (750ns min, 250ns max)
	Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
	Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
	Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
	Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
	Region 4: I/O ports at f400 [size=16]
	Capabilities: <access denied>
	Kernel driver in use: AMD_IDE
	Kernel modules: ata_generic, amd74xx, ide-pci-generic

00:0d.0 IDE interface [0101]: nVidia Corporation MCP55 SATA Controller [10de:037f] (rev a2) (prog-if 85 [Master SecO PriO])
	Subsystem: ASUSTeK Computer Inc. Device [1043:81fb]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (750ns min, 250ns max)
	Interrupt: pin A routed to IRQ 21
	Region 0: I/O ports at 09f0 [size=8]
	Region 1: I/O ports at 0bf0 [size=4]
	Region 2: I/O ports at 0970 [size=8]
	Region 3: I/O ports at 0b70 [size=4]
	Region 4: I/O ports at e000 [size=16]
	Region 5: Memory at fe02d000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: sata_nv
	Kernel modules: ata_generic, sata_nv, ide-pci-generic

00:0d.1 IDE interface [0101]: nVidia Corporation MCP55 SATA Controller [10de:037f] (rev a2) (prog-if 85 [Master SecO PriO])
	Subsystem: ASUSTeK Computer Inc. Device [1043:81fb]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (750ns min, 250ns max)
	Interrupt: pin B routed to IRQ 20
	Region 0: I/O ports at 09e0 [size=8]
	Region 1: I/O ports at 0be0 [size=4]
	Region 2: I/O ports at 0960 [size=8]
	Region 3: I/O ports at 0b60 [size=4]
	Region 4: I/O ports at cc00 [size=16]
	Region 5: Memory at fe02c000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: sata_nv
	Kernel modules: ata_generic, sata_nv, ide-pci-generic

00:0d.2 IDE interface [0101]: nVidia Corporation MCP55 SATA Controller [10de:037f] (rev a2) (prog-if 85 [Master SecO PriO])
	Subsystem: ASUSTeK Computer Inc. Device [1043:81fb]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (750ns min, 250ns max)
	Interrupt: pin C routed to IRQ 23
	Region 0: I/O ports at c800 [size=8]
	Region 1: I/O ports at c400 [size=4]
	Region 2: I/O ports at c000 [size=8]
	Region 3: I/O ports at bc00 [size=4]
	Region 4: I/O ports at b800 [size=16]
	Region 5: Memory at fe02b000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: sata_nv
	Kernel modules: ata_generic, sata_nv, ide-pci-generic

00:0e.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI bridge [10de:0370] (rev a2) (prog-if 01)
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
	Memory behind bridge: fdf00000-fdffffff
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn+
	Capabilities: <access denied>

00:0e.1 Audio device [0403]: nVidia Corporation MCP55 High Definition Audio [10de:0371] (rev a2)
	Subsystem: ASUSTeK Computer Inc. Device [1043:81f6]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (500ns min, 1250ns max)
	Interrupt: pin B routed to IRQ 20
	Region 0: Memory at fe020000 (32-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: HDA Intel
	Kernel modules: snd-hda-intel

00:10.0 Bridge [0680]: nVidia Corporation MCP55 Ethernet [10de:0373] (rev a2)
	Subsystem: ASUSTeK Computer Inc. Device [1043:81fb]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (250ns min, 5000ns max)
	Interrupt: pin A routed to IRQ 1272
	Region 0: Memory at fe02a000 (32-bit, non-prefetchable) [size=4K]
	Region 1: I/O ports at b400 [size=8]
	Region 2: Memory at fe029000 (32-bit, non-prefetchable) [size=256]
	Region 3: Memory at fe028000 (32-bit, non-prefetchable) [size=16]
	Capabilities: <access denied>
	Kernel driver in use: forcedeth
	Kernel modules: forcedeth

00:11.0 Bridge [0680]: nVidia Corporation MCP55 Ethernet [10de:0373] (rev a2)
	Subsystem: ASUSTeK Computer Inc. Device [1043:81fb]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (250ns min, 5000ns max)
	Interrupt: pin A routed to IRQ 1271
	Region 0: Memory at fe027000 (32-bit, non-prefetchable) [size=4K]
	Region 1: I/O ports at b000 [size=8]
	Region 2: Memory at fe026000 (32-bit, non-prefetchable) [size=256]
	Region 3: Memory at fe025000 (32-bit, non-prefetchable) [size=16]
	Capabilities: <access denied>
	Kernel driver in use: forcedeth
	Kernel modules: forcedeth

00:12.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express bridge [10de:0376] (rev a2)
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Bus: primary=00, secondary=03, subordinate=05, sec-latency=0
	Memory behind bridge: fde00000-fdefffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport-driver
	Kernel modules: shpchp

00:14.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express bridge [10de:0374] (rev a2)
	Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport-driver
	Kernel modules: shpchp

00:15.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express bridge [10de:0378] (rev a2)
	Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport-driver
	Kernel modules: shpchp

00:16.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express bridge [10de:0375] (rev a2)
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Bus: primary=00, secondary=08, subordinate=08, sec-latency=0
	I/O behind bridge: 00009000-0000afff
	Memory behind bridge: fdd00000-fddfffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport-driver
	Kernel modules: shpchp

00:17.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express bridge [10de:0377] (rev a2)
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Bus: primary=00, secondary=09, subordinate=09, sec-latency=0
	I/O behind bridge: 00008000-00008fff
	Memory behind bridge: fdc00000-fdcfffff
	Prefetchable memory behind bridge: 00000000e0000000-00000000efffffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport-driver
	Kernel modules: shpchp

00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Capabilities: <access denied>

00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Capabilities: <access denied>
	Kernel driver in use: k8temp
	Kernel modules: k8temp

02:0b.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) [104c:8023] (prog-if 10)
	Subsystem: ASUSTeK Computer Inc. Device [1043:815b]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32 (500ns min, 1000ns max), Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 19
	Region 0: Memory at fdfff000 (32-bit, non-prefetchable) [size=2K]
	Region 1: Memory at fdff8000 (32-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: ohci1394
	Kernel modules: ohci1394

03:00.0 PCI bridge [0604]: NEC Corporation uPD720400 PCI Express - PCI/PCI-X Bridge [1033:0125] (rev 06)
	Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Bus: primary=03, secondary=04, subordinate=04, sec-latency=32
	Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel modules: shpchp

03:00.1 PCI bridge [0604]: NEC Corporation uPD720400 PCI Express - PCI/PCI-X Bridge [1033:0125] (rev 06)
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Region 0: Memory at fdeff000 (64-bit, non-prefetchable) [size=128]
	Bus: primary=03, secondary=05, subordinate=05, sec-latency=32
	Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: shpchp
	Kernel modules: shpchp

08:00.0 RAID bus controller [0104]: Marvell Technology Group Ltd. 88SE6145 SATA II PCI-E controller [11ab:6145] (rev a1) (prog-if 8f)
	Subsystem: ASUSTeK Computer Inc. Device [1043:8220]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (2000ns min), Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 16
	Region 0: I/O ports at ac00 [size=8]
	Region 1: I/O ports at a800 [size=4]
	Region 2: I/O ports at a400 [size=8]
	Region 3: I/O ports at a000 [size=4]
	Region 4: I/O ports at 9c00 [size=16]
	Region 5: Memory at fddff000 (32-bit, non-prefetchable) [size=1K]
	Expansion ROM at fdd80000 [disabled] [size=256K]
	Capabilities: <access denied>
	Kernel driver in use: ahci
	Kernel modules: pata_marvell, ahci

09:00.0 VGA compatible controller [0300]: ATI Technologies Inc Radeon HD 3850 [1002:9505]
	Subsystem: ATI Technologies Inc Device [1002:e630]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 10
	Region 0: Memory at e0000000 (64-bit, prefetchable) [size=256M]
	Region 2: Memory at fdce0000 (64-bit, non-prefetchable) [size=64K]
	Region 4: I/O ports at 8c00 [size=256]
	Expansion ROM at fdcc0000 [disabled] [size=128K]
	Capabilities: <access denied>

09:00.1 Audio device [0403]: ATI Technologies Inc Radeon HD 3870 Audio device [1002:aa18]
	Subsystem: ATI Technologies Inc Radeon HD 3870 Audio device [1002:aa18]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Interrupt: pin B routed to IRQ 16
	Region 0: Memory at fdcfc000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: HDA Intel
	Kernel modules: snd-hda-intel



-- System Information:
Debian Release: lenny/sid
  APT prefers testing
  APT policy: (500, 'testing')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.26-1-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages linux-image-2.6.26-1-amd64 depends on:
ii  debconf [debconf-2.0]         1.5.22     Debian configuration management sy
ii  initramfs-tools [linux-initra 0.92g      tools for generating an initramfs
ii  module-init-tools             3.4-1      tools for managing Linux kernel mo

linux-image-2.6.26-1-amd64 recommends no packages.

Versions of packages linux-image-2.6.26-1-amd64 suggests:
ii  grub-pc [grub]           1.96+20080724-9 GRand Unified Bootloader, version 
pn  linux-doc-2.6.26         <none>          (no description available)

-- debconf information:
  linux-image-2.6.26-1-amd64/postinst/create-kimage-link-2.6.26-1-amd64: true
  shared/kernel-image/really-run-bootloader: true
  linux-image-2.6.26-1-amd64/postinst/kimage-is-a-directory:
  linux-image-2.6.26-1-amd64/postinst/old-initrd-link-2.6.26-1-amd64: true
  linux-image-2.6.26-1-amd64/preinst/bootloader-initrd-2.6.26-1-amd64: true
  linux-image-2.6.26-1-amd64/preinst/initrd-2.6.26-1-amd64:
  linux-image-2.6.26-1-amd64/postinst/old-system-map-link-2.6.26-1-amd64: true
  linux-image-2.6.26-1-amd64/postinst/depmod-error-initrd-2.6.26-1-amd64: false
  linux-image-2.6.26-1-amd64/preinst/overwriting-modules-2.6.26-1-amd64: true
  linux-image-2.6.26-1-amd64/preinst/elilo-initrd-2.6.26-1-amd64: true
  linux-image-2.6.26-1-amd64/postinst/bootloader-error-2.6.26-1-amd64:
  linux-image-2.6.26-1-amd64/preinst/abort-install-2.6.26-1-amd64:
  linux-image-2.6.26-1-amd64/preinst/lilo-initrd-2.6.26-1-amd64: true
  linux-image-2.6.26-1-amd64/postinst/depmod-error-2.6.26-1-amd64: false
  linux-image-2.6.26-1-amd64/prerm/removing-running-kernel-2.6.26-1-amd64: true
  linux-image-2.6.26-1-amd64/prerm/would-invalidate-boot-loader-2.6.26-1-amd64: true
  linux-image-2.6.26-1-amd64/postinst/bootloader-test-error-2.6.26-1-amd64:
  linux-image-2.6.26-1-amd64/preinst/abort-overwrite-2.6.26-1-amd64:
  linux-image-2.6.26-1-amd64/postinst/old-dir-initrd-link-2.6.26-1-amd64: true
  linux-image-2.6.26-1-amd64/preinst/lilo-has-ramdisk:
  linux-image-2.6.26-1-amd64/preinst/failed-to-move-modules-2.6.26-1-amd64:

--- End Message ---
--- Begin Message --- 
Source: user-mode-linux
Source-Version: 2.6.26-1um-2+16

We believe that the bug you reported is fixed in the latest version of
user-mode-linux, which is due to be installed in the Debian FTP archive:

user-mode-linux_2.6.26-1um-2+16.diff.gz
  to pool/main/u/user-mode-linux/user-mode-linux_2.6.26-1um-2+16.diff.gz
user-mode-linux_2.6.26-1um-2+16.dsc
  to pool/main/u/user-mode-linux/user-mode-linux_2.6.26-1um-2+16.dsc
user-mode-linux_2.6.26-1um-2+16_i386.deb
  to pool/main/u/user-mode-linux/user-mode-linux_2.6.26-1um-2+16_i386.deb



A summary of the changes between this version and the previous one is
attached.

Thank you for reporting the bug, which will now be closed.  If you
have further comments please address them to 498271@bugs.debian.org,
and the maintainer will reopen the bug report if appropriate.

Debian distribution maintenance software
pp.
dann frazier <dannf@debian.org> (supplier of updated user-mode-linux package)

(This message was generated automatically at their request; if you
believe that there is a problem with it please contact the archive
administrators by mailing ftpmaster@debian.org)


-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Format: 1.8
Date: Tue, 09 Jun 2009 16:47:27 -0600
Source: user-mode-linux
Binary: user-mode-linux
Architecture: source i386
Version: 2.6.26-1um-2+16
Distribution: stable
Urgency: high
Maintainer: User Mode Linux Maintainers <pkg-uml-pkgs@lists.alioth.debian.org>
Changed-By: dann frazier <dannf@debian.org>
Description: 
 user-mode-linux - User-mode Linux (kernel)
Closes: 466491 498271 511334 514268 514627 520551 521420 523359 523360 523364 524199 524300 525060 526836 527101 529312 529864 530884
Changes: 
 user-mode-linux (2.6.26-1um-2+16) stable; urgency=high
 .
   * Rebuild against linux-source-2.6.26 (2.6.26-16):
     [ maximilian attems ]
     * [openvz] 5dcfcf5 NETLINK: disable netns broadcast filtering.
       (closes: #520551)
     * Fix SQLite performance regression. (closes: #521420)
     * [openvz] 0c295ff cfq link cfq_bc_data without bc io sched.
       (closes: #523364)
     * [openvz] 7e0f90d cfq: revalidate cached async queue.
       (closes: #523359)
     * [openvz] e4cea21 VE: fix idle time accounting.
     * [openvz] 19b8e13 ptrace: ban ptracing of a container init from inside the
       container. (closes: #523360)
     * [openvz] 5b58141 ubc: uncharging too much for TCPSNDBUF.
     * [openvz] 0ff728e ve: show task's vpid and veid even inside a container.
 .
     [ dann frazier ]
     * [s390] Fix __div64_31 for CONFIG_MARCH_G5 (Closes: #511334)
     * SUNRPC: Fix a performance regression in the RPC authentication code
       (Closes: #524199)
     * [x86] fix IBM Summit based systems' phys_cpu_present_map on 32-bit
       kernels (closes: #529312)
     * Fix soft lockups caused by one md resync blocking on another due
       to sharing the same device (closes: #514627)
     * [sparc64] Fix crash when reading /proc/iomem w/ heap memory checking
       (CVE-2009-1914)
     * splice: fix deadlock in ocfs2 (CVE-2009-1961)
     * e1000: add missing length check to e1000 receive routine (CVE-2009-1385)
     * r8169: fix crash when large packets are received (CVE-2009-1389)
 .
     [ Martin Michlmayr ]
     * cdc-acm: Add quirk for MTK II GPS, such as Qstarz BT-Q1000X (closes:
       #525060)
     * USB: ftdi_sio: add vendor/product id for the Marvell SheevaPlug.
     * [mipsel/r5k-cobalt] Enable SCSI_SYM53C8XX_2 (closes: #526836).
     * [mips/r4k-ip22] Enable NET_ISA and various ISA network modules on
       the request of Damian Dimmich since they might be useful on the
       SGI Indigo2.
 .
     [ John Wright ]
     * [x86] gettimeofday() vDSO: fix segfault when tv == NULL (Closes: #466491)
 .
     [ Ian Campbell ]
     * [x86/xen] Apply missing syscall detection patch to -xen-amd64 image
       (Closes: #527101)
     * [xen] Add support for CDROM_GET_CAPABILITY to blkfront driver
       (Closes: #529864)
 .
     [ Ben Hutchings ]
     * sata_nv: avoid link reset on controllers where it's broken
       (Closes: #498271)
     * r8169: fix multicast filtering for RTL8101 and RTL8168 (Closes: #514268)
     * asus_acpi: don't load asus-acpi if model is not supported
       (Closes: #524300)
     * iwl4965: avoid sleep in softirq context (Closes: #530884)
Checksums-Sha1: 
 5a838be0b6d9c80ef0e9cd3166b2dabb5e70122e 1242 user-mode-linux_2.6.26-1um-2+16.dsc
 f8ad7fb460b70b1a7c35a6a145d8fe7c923bec59 14608 user-mode-linux_2.6.26-1um-2+16.diff.gz
 8c92bd98f4f6dd7f9812316c334171bdf6ab5274 5354222 user-mode-linux_2.6.26-1um-2+16_i386.deb
Checksums-Sha256: 
 561c9d73d27efcd7086d864e7320386ceb09c14c48247cc8f464ef0b1a964c29 1242 user-mode-linux_2.6.26-1um-2+16.dsc
 16deedc5ad410eb23463e8e6048321cd7b4f2700760553a0024ad52e214db981 14608 user-mode-linux_2.6.26-1um-2+16.diff.gz
 e43ae359013ef61111792accc0fdb1f3373f6ce084428a432f7d1584312de23a 5354222 user-mode-linux_2.6.26-1um-2+16_i386.deb
Files: 
 1c330c7b90a949a8717f40b71522015a 1242 misc extra user-mode-linux_2.6.26-1um-2+16.dsc
 c8f3820600488268d06b8ee3f68a2282 14608 misc extra user-mode-linux_2.6.26-1um-2+16.diff.gz
 3e5b785dd366ad90035954cbab019d5b 5354222 misc extra user-mode-linux_2.6.26-1um-2+16_i386.deb

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.9 (GNU/Linux)

iD8DBQFKLvGshuANDBmkLRkRAlcaAJ0eirEC3KvBAzeIJyCgi2hpr5QwdQCeJ4JS
U/S7e49gS+B3d1gTy0zwndc=
=rxAF
-----END PGP SIGNATURE-----

--- End Message ---
Reply to: