Hi, Am Freitag, den 19.06.2009, 23:00 +0200 schrieb Bastian Blank: > On Fri, Jun 19, 2009 at 08:34:16PM +0000, Joachim Breitner wrote: > > my girlfriends laptop runs Debian Lenny. With the current kernel in > > Lenny, she is unable to connect to a channel 13 network, using the > > iwl3945 module. > > Log? Otherwise I assume that you are using a MOW1 card. sorry, the laptop is not mine and I was too lazy to copy it via an usb stick at first. Attached the full dmesg and the used modprobe.d file, here the relevant part of dmesg: [ 8.914416] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks [ 8.914507] iwl3945: Copyright(c) 2003-2008 Intel Corporation [ 8.914507] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 8.914507] PCI: Setting latency timer of device 0000:02:00.0 to 64 [ 8.914507] iwl3945: Detected Intel Wireless WiFi Link 3945BG [ 9.007497] iwl3945: Tunable channels: 11 802.11bg, 0 802.11a channels [..] [ 23.125754] firmware: requesting iwlwifi-3945-1.ucode [ 23.248494] Registered led device: iwl-phy0:radio [ 23.248494] Registered led device: iwl-phy0:assoc [ 23.248494] Registered led device: iwl-phy0:RX [ 23.249564] Registered led device: iwl-phy0:TX How can I best detect whether the card is affected by a MOW1 eeprom? Greetings and thanks, Joachim -- Joachim "nomeata" Breitner Debian Developer nomeata@debian.org | ICQ# 74513189 | GPG-Keyid: 4743206C JID: nomeata@joachim-breitner.de | http://people.debian.org/~nomeata
[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.26-2-amd64 (Debian 2.6.26-15lenny3) (dannf@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Thu May 28 21:28:49 UTC 2009 [ 0.000000] Command line: root=/dev/mapper/Laptop--Susanne-root ro [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007f6d0000 (usable) [ 0.000000] BIOS-e820: 000000007f6d0000 - 000000007f6e3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007f6e3000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 521936) 1 entries of 3200 used [ 0.000000] max_pfn_mapped = 1048576 [ 0.000000] init_memory_mapping [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP 000F6DE0, 0024 (r2 PTLTD ) [ 0.000000] ACPI: XSDT 7F6D72BA, 00AC (r1 SECCSD LH43STAR 6040000 LTP 0) [ 0.000000] ACPI: FACP 7F6DFB37, 00F4 (r3 INTEL CRESTLNE 6040000 ALAN 1) [ 0.000000] ACPI: DSDT 7F6D9266, 685D (r2 INTEL CRESTLNE 6040000 INTL 20050624) [ 0.000000] ACPI: FACS 7F6E2FC0, 0040 [ 0.000000] ACPI: APIC 7F6DFC2B, 0068 (r1 INTEL CRESTLNE 6040000 LOHR 5A) [ 0.000000] ACPI: HPET 7F6DFC93, 0038 (r1 INTEL CRESTLNE 6040000 LOHR 5A) [ 0.000000] ACPI: MCFG 7F6DFCCB, 003C (r1 INTEL CRESTLNE 6040000 LOHR 5A) [ 0.000000] ACPI: TCPA 7F6DFD07, 0032 (r1 Intel CRESTLN 6040000 5A52) [ 0.000000] ACPI: TMOR 7F6DFD39, 0026 (r1 PTLTD 6040000 PTL 3) [ 0.000000] ACPI: APIC 7F6DFD5F, 0068 (r1 PTLTD APIC 6040000 LTP 0) [ 0.000000] ACPI: HPET 7F6DFDC7, 0038 (r1 PTLTD HPETTBL 6040000 LTP 1) [ 0.000000] ACPI: BOOT 7F6DFDFF, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1) [ 0.000000] ACPI: ASF! 7F6DFE27, 0063 (r16 CETP CETP 6040000 PTL 1) [ 0.000000] ACPI: SLIC 7F6DFE8A, 0176 (r1 SECCSD LH43STAR 6040000 LTP 0) [ 0.000000] ACPI: SSDT 7F6D8C17, 064F (r1 SataRe SataPri 1000 INTL 20050624) [ 0.000000] ACPI: SSDT 7F6D8585, 0692 (r1 SataRe SataSec 1000 INTL 20050624) [ 0.000000] ACPI: SSDT 7F6D854C, 0039 (r1 BrtRef DD01BRT 1000 INTL 20050624) [ 0.000000] ACPI: SSDT 7F6D78F2, 025F (r1 PmRef Cpu0Tst 3000 INTL 20050624) [ 0.000000] ACPI: SSDT 7F6D784C, 00A6 (r1 PmRef Cpu1Tst 3000 INTL 20050624) [ 0.000000] ACPI: SSDT 7F6D7366, 04E6 (r1 PmRef CpuPm 3000 INTL 20050624) [ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0 [ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org [ 0.000000] ACPI: DMI detected: Samsung [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000007f6d0000 [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 521936) 1 entries of 3200 used [ 0.000000] Bootmem setup node 0 0000000000000000-000000007f6d0000 [ 0.000000] NODE_DATA [000000000000c000 - 0000000000010fff] [ 0.000000] bootmap [0000000000011000 - 0000000000020edf] pages 10 [ 0.000000] early res: 0 [0-fff] BIOS data page [ 0.000000] early res: 1 [6000-7fff] TRAMPOLINE [ 0.000000] early res: 2 [200000-673397] TEXT DATA BSS [ 0.000000] early res: 3 [378c0000-37fef8b8] RAMDISK [ 0.000000] early res: 4 [9f800-fffff] BIOS reserved [ 0.000000] early res: 5 [8000-bfff] PGTABLE [ 0.000000] [ffffe20000000000-ffffe20001bfffff] PMD -> [ffff810001200000-ffff810002dfffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1048576 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0 -> 159 [ 0.000000] 0: 256 -> 521936 [ 0.000000] On node 0 totalpages: 521839 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1244 pages reserved [ 0.000000] DMA zone: 2699 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7080 pages used for memmap [ 0.000000] DMA32 zone: 510760 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000 [ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000) [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 37168 bytes of per cpu data [ 0.000000] NR_CPUS: 32, nr_cpu_ids: 2 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 513459 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: root=/dev/mapper/Laptop--Susanne-root ro [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Extended CMOS year: 2000 [ 0.000000] TSC calibrated against PM_TIMER [ 0.000000] time.c: Detected 1662.508 MHz processor. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Checking aperture... [ 0.004000] Calgary: detecting Calgary via BIOS EBDA area [ 0.004000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.004000] Memory: 2046488k/2087744k available (2225k kernel code, 40868k reserved, 1080k data, 392k init) [ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated [ 0.004000] hpet clockevent registered [ 0.083870] Calibrating delay using timer specific routine.. 3329.40 BogoMIPS (lpj=6658818) [ 0.084005] Security Framework initialized [ 0.084005] SELinux: Disabled at boot. [ 0.084005] Capability LSM initialized [ 0.084005] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.084005] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.084005] Mount-cache hash table entries: 256 [ 0.084005] Initializing cgroup subsys ns [ 0.084005] Initializing cgroup subsys cpuacct [ 0.084005] Initializing cgroup subsys devices [ 0.084005] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.084005] CPU: L2 cache: 2048K [ 0.084005] CPU 0/0 -> Node 0 [ 0.084096] CPU: Physical Processor ID: 0 [ 0.084157] CPU: Processor Core ID: 0 [ 0.084228] CPU0: Thermal monitoring enabled (TM2) [ 0.084292] using mwait in idle threads. [ 0.085808] ACPI: Core revision 20080321 [ 0.144009] CPU0: Intel(R) Core(TM)2 Duo CPU T5450 @ 1.66GHz stepping 0d [ 0.144009] Using local APIC timer interrupts. [ 0.148009] APIC timer calibration result 10390675 [ 0.148009] Detected 10.390 MHz APIC timer. [ 0.148009] Booting processor 1/1 ip 6000 [ 0.156009] Initializing CPU#1 [ 0.156009] Calibrating delay using timer specific routine.. 3325.05 BogoMIPS (lpj=6650115) [ 0.156009] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.156009] CPU: L2 cache: 2048K [ 0.156009] CPU 1/1 -> Node 0 [ 0.156009] CPU: Physical Processor ID: 0 [ 0.156009] CPU: Processor Core ID: 1 [ 0.156009] CPU1: Thermal monitoring enabled (TM2) [ 0.236014] CPU1: Intel(R) Core(TM)2 Duo CPU T5450 @ 1.66GHz stepping 0d [ 0.236014] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.240015] Brought up 2 CPUs [ 0.240015] Total of 2 processors activated (6654.46 BogoMIPS). [ 0.240015] CPU0 attaching sched-domain: [ 0.240015] domain 0: span 0-1 [ 0.240015] groups: 0 1 [ 0.240015] domain 1: span 0-1 [ 0.240015] groups: 0-1 [ 0.240015] CPU1 attaching sched-domain: [ 0.240015] domain 0: span 0-1 [ 0.240015] groups: 1 0 [ 0.240015] domain 1: span 0-1 [ 0.240015] groups: 0-1 [ 0.240015] net_namespace: 1224 bytes [ 0.240015] Booting paravirtualized kernel on bare hardware [ 0.240015] NET: Registered protocol family 16 [ 0.240015] ACPI: bus type pci registered [ 0.240015] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.240015] PCI: MCFG area at e0000000 reserved in E820 [ 0.260016] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.260016] PCI: Using configuration type 1 for base access [ 0.264016] ACPI: EC: Look up EC in DSDT [ 0.268016] ACPI: BIOS _OSI(Linux) query ignored via DMI [ 0.271611] ACPI: Interpreter enabled [ 0.271676] ACPI: (supports S0 S3 S4 S5) [ 0.271944] ACPI: Using IOAPIC for interrupt routing [ 0.276013] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 0.300015] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 0.300015] ACPI: EC: driver started in interrupt mode [ 0.300015] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.301164] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 0.301164] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO [ 0.301488] PCI: Transparent bridge - 0000:00:1e.0 [ 0.301621] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.302436] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.302679] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 0.302958] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 0.320119] ACPI: PCI Interrupt Link [LNKA] (IRQs 11) *10 [ 0.320119] ACPI: PCI Interrupt Link [LNKB] (IRQs *5) [ 0.320119] ACPI: PCI Interrupt Link [LNKC] (IRQs *10) [ 0.320244] ACPI: PCI Interrupt Link [LNKD] (IRQs *5) [ 0.320606] ACPI: PCI Interrupt Link [LNKE] (IRQs *11) [ 0.320972] ACPI: PCI Interrupt Link [LNKF] (IRQs *10) [ 0.321333] ACPI: PCI Interrupt Link [LNKG] (IRQs *5) [ 0.321694] ACPI: PCI Interrupt Link [LNKH] (IRQs *5) [ 0.323546] ACPI: Power Resource [FN00] (off) [ 0.324016] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.324016] pnp: PnP ACPI init [ 0.324016] ACPI: bus type pnp registered [ 0.324016] pnp 00:00: parse allocated resources [ 0.324016] pnp 00:00: add io 0xcf8-0xcff flags 0x1 [ 0.324016] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.324016] pnp 00:01: parse allocated resources [ 0.324016] pnp 00:01: add mem 0xfed1c000-0xfed1ffff flags 0x1 [ 0.324016] pnp 00:01: add mem 0xfed14000-0xfed17fff flags 0x1 [ 0.324016] pnp 00:01: add mem 0xfed18000-0xfed18fff flags 0x1 [ 0.324016] pnp 00:01: add mem 0xfed19000-0xfed19fff flags 0x1 [ 0.324016] pnp 00:01: add mem 0xe0000000-0xefffffff flags 0x1 [ 0.324016] pnp 00:01: add mem 0xfed20000-0xfed3ffff flags 0x1 [ 0.324016] pnp 00:01: add mem 0xfed40000-0xfed44fff flags 0x1 [ 0.324016] pnp 00:01: add mem 0xfed45000-0xfed8ffff flags 0x1 [ 0.324016] pnp 00:01: PNP0c02: calling quirk_system_pci_resources+0x0/0x15c [ 0.324132] pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.324824] pnp 00:02: parse allocated resources [ 0.324833] pnp 00:02: add io 0x0-0x1f flags 0x1 [ 0.324836] pnp 00:02: add io 0x81-0x91 flags 0x1 [ 0.324839] pnp 00:02: add io 0x93-0x9f flags 0x1 [ 0.324842] pnp 00:02: add io 0xc0-0xdf flags 0x1 [ 0.324845] pnp 00:02: add dma 4 flags 0x1 [ 0.324918] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.324936] pnp 00:03: parse allocated resources [ 0.324944] pnp 00:03: add mem 0xff000000-0xffffffff flags 0x0 [ 0.325014] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active) [ 0.325112] pnp 00:04: parse allocated resources [ 0.325243] pnp 00:04: add mem 0xfed00000-0xfed003ff flags 0x0 [ 0.325249] pnp 00:04: PNP0c01: calling quirk_system_pci_resources+0x0/0x15c [ 0.325358] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) [ 0.325378] pnp 00:05: parse allocated resources [ 0.325386] pnp 00:05: add io 0xf0-0xf0 flags 0x1 [ 0.325396] pnp 00:05: add irq 13 flags 0x1 [ 0.325468] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.325485] pnp 00:06: parse allocated resources [ 0.325496] pnp 00:06: add io 0x2e-0x2f flags 0x1 [ 0.325499] pnp 00:06: add io 0x4e-0x4f flags 0x1 [ 0.325501] pnp 00:06: add io 0x61-0x61 flags 0x1 [ 0.325504] pnp 00:06: add io 0x63-0x63 flags 0x1 [ 0.325507] pnp 00:06: add io 0x65-0x65 flags 0x1 [ 0.325510] pnp 00:06: add io 0x67-0x67 flags 0x1 [ 0.325512] pnp 00:06: add io 0x80-0x80 flags 0x1 [ 0.325515] pnp 00:06: add io 0x92-0x92 flags 0x1 [ 0.325518] pnp 00:06: add io 0xb2-0xb3 flags 0x1 [ 0.325521] pnp 00:06: add io 0x680-0x69f flags 0x1 [ 0.325524] pnp 00:06: add io 0x6b0-0x6ff flags 0x1 [ 0.325526] pnp 00:06: add io 0x800-0x80f flags 0x1 [ 0.325529] pnp 00:06: add io 0x900-0x90f flags 0x1 [ 0.325532] pnp 00:06: add io 0x1000-0x107f flags 0x1 [ 0.325535] pnp 00:06: add io 0x1180-0x11bf flags 0x1 [ 0.325538] pnp 00:06: add io 0x1640-0x164f flags 0x1 [ 0.325541] pnp 00:06: add io 0xfe00-0xfe00 flags 0x1 [ 0.325546] pnp 00:06: PNP0c02: calling quirk_system_pci_resources+0x0/0x15c [ 0.325655] pnp 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.325675] pnp 00:07: parse allocated resources [ 0.325682] pnp 00:07: add io 0x70-0x77 flags 0x1 [ 0.325689] pnp 00:07: add irq 8 flags 0x1 [ 0.325761] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.325780] pnp 00:08: parse allocated resources [ 0.325787] pnp 00:08: add io 0x60-0x60 flags 0x1 [ 0.325790] pnp 00:08: add io 0x64-0x64 flags 0x1 [ 0.325796] pnp 00:08: add irq 1 flags 0x1 [ 0.325868] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.325885] pnp 00:09: parse allocated resources [ 0.325895] pnp 00:09: add irq 12 flags 0x1 [ 0.325972] pnp 00:09: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.328017] pnp: PnP ACPI: found 10 devices [ 0.328017] ACPI: ACPI bus type pnp unregistered [ 0.328017] usbcore: registered new interface driver usbfs [ 0.332017] usbcore: registered new interface driver hub [ 0.332017] usbcore: registered new device driver usb [ 0.332017] PCI: Using ACPI for IRQ routing [ 0.357553] PCI-GART: No AMD northbridge found. [ 0.357623] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.357873] hpet0: 3 64-bit timers, 14318180 Hz [ 0.369497] pnp: the driver 'system' has been registered [ 0.369512] system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved [ 0.369593] system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved [ 0.369674] system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved [ 0.369755] system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved [ 0.369835] system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved [ 0.369916] system 00:01: iomem range 0xfed20000-0xfed3ffff could not be reserved [ 0.369996] system 00:01: iomem range 0xfed40000-0xfed44fff could not be reserved [ 0.370077] system 00:01: iomem range 0xfed45000-0xfed8ffff could not be reserved [ 0.370156] system 00:01: driver attached [ 0.370167] system 00:04: iomem range 0xfed00000-0xfed003ff could not be reserved [ 0.370247] system 00:04: driver attached [ 0.370255] system 00:06: ioport range 0x680-0x69f has been reserved [ 0.370323] system 00:06: ioport range 0x6b0-0x6ff has been reserved [ 0.370391] system 00:06: ioport range 0x800-0x80f has been reserved [ 0.370459] system 00:06: ioport range 0x900-0x90f has been reserved [ 0.370527] system 00:06: ioport range 0x1000-0x107f has been reserved [ 0.370595] system 00:06: ioport range 0x1180-0x11bf has been reserved [ 0.370664] system 00:06: ioport range 0x1640-0x164f has been reserved [ 0.370732] system 00:06: ioport range 0xfe00-0xfe00 has been reserved [ 0.370801] system 00:06: driver attached [ 0.373452] PCI: region 0000:04:09.0/9 too large: 0x0000000000000000-0x0000000003ffffff [ 0.373452] PCI: Bridge: 0000:00:1c.0 [ 0.373452] IO window: disabled. [ 0.373452] MEM window: 0xf0300000-0xf03fffff [ 0.373452] PREFETCH window: disabled. [ 0.373452] PCI: Bridge: 0000:00:1c.1 [ 0.373452] IO window: 2000-2fff [ 0.373452] MEM window: 0xf0200000-0xf02fffff [ 0.373452] PREFETCH window: disabled. [ 0.373452] PCI: Bus 5, cardbus bridge: 0000:04:09.0 [ 0.373517] IO window: 0x00003000-0x000030ff [ 0.373517] IO window: 0x00003400-0x000034ff [ 0.373517] MEM window: 0x8c000000-0x8fffffff [ 0.373517] PCI: Bridge: 0000:00:1e.0 [ 0.373517] IO window: 3000-3fff [ 0.373517] MEM window: 0xf0400000-0xf04fffff [ 0.373517] PREFETCH window: disabled. [ 0.373517] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 0.373517] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 0.373517] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16 [ 0.373517] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 0.373517] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 0.373517] ACPI: PCI Interrupt 0000:04:09.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 0.373517] NET: Registered protocol family 2 [ 0.413606] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.414772] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.417621] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.418418] TCP: Hash tables configured (established 262144 bind 65536) [ 0.418487] TCP reno registered [ 0.429578] NET: Registered protocol family 1 [ 0.429793] checking if image is initramfs...<7>Switched to high resolution mode on CPU 1 [ 0.509235] Switched to high resolution mode on CPU 0 [ 0.876998] it is [ 1.349097] Freeing initrd memory: 7358k freed [ 1.353804] Simple Boot Flag at 0x36 set to 0x1 [ 1.353804] audit: initializing netlink socket (disabled) [ 1.353804] type=2000 audit(1245494981.348:1): initialized [ 1.353804] Total HugeTLB memory allocated, 0 [ 1.357806] VFS: Disk quotas dquot_6.5.1 [ 1.357806] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.357806] msgmni has been set to 4011 [ 1.357806] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.357806] io scheduler noop registered [ 1.357806] io scheduler anticipatory registered [ 1.357806] io scheduler deadline registered [ 1.357806] io scheduler cfq registered (default) [ 1.357806] pci 0000:00:02.0: Boot video device [ 1.357806] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 1.357806] assign_interrupt_mode Found MSI capability [ 1.357806] Allocate Port Service[0000:00:1c.0:pcie00] [ 1.357806] Allocate Port Service[0000:00:1c.0:pcie02] [ 1.357806] Allocate Port Service[0000:00:1c.0:pcie03] [ 1.357806] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 1.357806] assign_interrupt_mode Found MSI capability [ 1.357806] Allocate Port Service[0000:00:1c.1:pcie00] [ 1.357806] Allocate Port Service[0000:00:1c.1:pcie02] [ 1.357806] Allocate Port Service[0000:00:1c.1:pcie03] [ 1.361792] hpet_resources: 0xfed00000 is busy [ 1.361792] Linux agpgart interface v0.103 [ 1.361792] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 1.361792] pnp: the driver 'serial' has been registered [ 1.365791] brd: module loaded [ 1.365791] input: Macintosh mouse button emulation as /class/input/input0 [ 1.365791] pnp: the driver 'i8042 kbd' has been registered [ 1.365791] i8042 kbd 00:08: driver attached [ 1.365791] pnp: the driver 'i8042 aux' has been registered [ 1.365791] i8042 aux 00:09: driver attached [ 1.365791] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.367817] i8042.c: Detected active multiplexing controller, rev 1.1. [ 1.368912] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.368981] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 1.370731] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 1.370731] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 1.370731] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 1.390710] mice: PS/2 mouse device common for all mice [ 1.390710] pnp: the driver 'rtc_cmos' has been registered [ 1.390710] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 1.390710] rtc0: alarms up to one month, y3k [ 1.390710] rtc_cmos 00:07: driver attached [ 1.390710] cpuidle: using governor ladder [ 1.390710] cpuidle: using governor menu [ 1.390710] No iBFT detected. [ 1.390710] TCP cubic registered [ 1.390710] NET: Registered protocol family 17 [ 1.390710] registered taskstats version 1 [ 1.390710] rtc_cmos 00:07: setting system clock to 2009-06-20 10:49:42 UTC (1245494982) [ 1.390710] Freeing unused kernel memory: 392k freed [ 1.413919] input: AT Translated Set 2 keyboard as /class/input/input1 [ 1.500318] ACPI: Transitioning device [FAN0] to D3 [ 1.504176] ACPI: PNP0C0B:00 is registered as cooling_device0 [ 1.504176] ACPI: Fan [FAN0] (off) [ 1.506628] ACPI: SSDT 7F6D81E0, 02A4 (r1 PmRef Cpu0Ist 3000 INTL 20050624) [ 1.507436] ACPI: SSDT 7F6D7B51, 060A (r1 PmRef Cpu0Cst 3001 INTL 20050624) [ 1.513805] Monitor-Mwait will be used to enter C-1 state [ 1.513810] Monitor-Mwait will be used to enter C-2 state [ 1.513814] Monitor-Mwait will be used to enter C-3 state [ 1.515953] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 1.515953] ACPI: ACPI0007:00 is registered as cooling_device1 [ 1.515953] ACPI: Processor [CPU0] (supports 8 throttling states) [ 1.515953] ACPI: SSDT 7F6D8484, 00C8 (r1 PmRef Cpu1Ist 3000 INTL 20050624) [ 1.515953] ACPI: SSDT 7F6D815B, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624) [ 1.516816] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 1.516965] ACPI: ACPI0007:01 is registered as cooling_device2 [ 1.517035] ACPI: Processor [CPU1] (supports 8 throttling states) [ 1.518332] Marking TSC unstable due to TSC halts in idle [ 1.544571] ACPI: LNXTHERM:01 is registered as thermal_zone0 [ 1.568940] ACPI: Thermal Zone [TZ00] (43 C) [ 1.568940] ACPI: LNXTHERM:02 is registered as thermal_zone1 [ 1.570467] ACPI: Thermal Zone [TZ01] (43 C) [ 1.982823] USB Universal Host Controller Interface driver v3.0 [ 1.982823] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 1.982823] PCI: Setting latency timer of device 0000:00:1a.0 to 64 [ 1.982823] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 1.982943] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.983062] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820 [ 1.983229] usb usb1: configuration #1 chosen from 1 choice [ 1.983333] hub 1-0:1.0: USB hub found [ 1.983401] hub 1-0:1.0: 2 ports detected [ 2.086275] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.086355] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.086438] usb usb1: Product: UHCI Host Controller [ 2.086503] usb usb1: Manufacturer: Linux 2.6.26-2-amd64 uhci_hcd [ 2.086571] usb usb1: SerialNumber: 0000:00:1a.0 [ 2.088180] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21 [ 2.088180] PCI: Setting latency timer of device 0000:00:1a.1 to 64 [ 2.088180] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 2.088180] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 [ 2.088180] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840 [ 2.088180] usb usb2: configuration #1 chosen from 1 choice [ 2.088180] hub 2-0:1.0: USB hub found [ 2.088180] hub 2-0:1.0: 2 ports detected [ 2.099896] Uniform Multi-Platform E-IDE driver [ 2.099968] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 2.136260] ricoh-mmc: Ricoh MMC Controller disabling driver [ 2.136331] ricoh-mmc: Copyright(c) Philip Langdale [ 2.146447] sdhci: Secure Digital Host Controller Interface driver [ 2.146519] sdhci: Copyright(c) Pierre Ossman [ 2.189760] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.189833] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.189912] usb usb2: Product: UHCI Host Controller [ 2.189978] usb usb2: Manufacturer: Linux 2.6.26-2-amd64 uhci_hcd [ 2.190044] usb usb2: SerialNumber: 0000:00:1a.1 [ 2.193345] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18 [ 2.193345] PCI: Setting latency timer of device 0000:00:1a.7 to 64 [ 2.193345] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 2.193345] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 3 [ 2.197344] ehci_hcd 0000:00:1a.7: debug port 1 [ 2.197349] PCI: cache line size of 32 is not supported by device 0000:00:1a.7 [ 2.197349] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf0704000 [ 2.209378] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 2.213345] usb usb3: configuration #1 chosen from 1 choice [ 2.213448] hub 3-0:1.0: USB hub found [ 2.213517] hub 3-0:1.0: 4 ports detected [ 2.315875] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.315948] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.316028] usb usb3: Product: EHCI Host Controller [ 2.316092] usb usb3: Manufacturer: Linux 2.6.26-2-amd64 ehci_hcd [ 2.316159] usb usb3: SerialNumber: 0000:00:1a.7 [ 2.316293] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23 [ 2.316428] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 2.316433] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 2.316562] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4 [ 2.316679] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860 [ 2.316845] usb usb4: configuration #1 chosen from 1 choice [ 2.316948] hub 4-0:1.0: USB hub found [ 2.317018] hub 4-0:1.0: 2 ports detected [ 2.421987] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.422056] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.422136] usb usb4: Product: UHCI Host Controller [ 2.422201] usb usb4: Manufacturer: Linux 2.6.26-2-amd64 uhci_hcd [ 2.422268] usb usb4: SerialNumber: 0000:00:1d.0 [ 2.422404] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 [ 2.422536] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 2.422541] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 2.422661] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5 [ 2.422782] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001880 [ 2.422941] usb usb5: configuration #1 chosen from 1 choice [ 2.423041] hub 5-0:1.0: USB hub found [ 2.423109] hub 5-0:1.0: 2 ports detected [ 2.517848] Clocksource tsc unstable (delta = -252975544 ns) [ 2.525978] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.526047] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.526126] usb usb5: Product: UHCI Host Controller [ 2.526191] usb usb5: Manufacturer: Linux 2.6.26-2-amd64 uhci_hcd [ 2.526258] usb usb5: SerialNumber: 0000:00:1d.1 [ 2.526394] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 2.526525] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 2.526530] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 2.526652] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6 [ 2.526761] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0 [ 2.526919] usb usb6: configuration #1 chosen from 1 choice [ 2.527019] hub 6-0:1.0: USB hub found [ 2.527088] hub 6-0:1.0: 2 ports detected [ 2.557843] usb 3-2: new high speed USB device using ehci_hcd and address 2 [ 2.629983] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.630053] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.630132] usb usb6: Product: UHCI Host Controller [ 2.630197] usb usb6: Manufacturer: Linux 2.6.26-2-amd64 uhci_hcd [ 2.630263] usb usb6: SerialNumber: 0000:00:1d.2 [ 2.630550] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23 [ 2.630690] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 2.630694] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 2.630815] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7 [ 2.637629] ehci_hcd 0000:00:1d.7: debug port 1 [ 2.637629] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 2.637629] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0704400 [ 2.682268] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 2.682434] usb usb7: configuration #1 chosen from 1 choice [ 2.682534] hub 7-0:1.0: USB hub found [ 2.682603] hub 7-0:1.0: 6 ports detected [ 2.784505] usb 3-2: configuration #1 chosen from 1 choice [ 2.787646] usb 3-2: New USB device found, idVendor=0ac8, idProduct=c302 [ 2.787716] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.787784] usb 3-2: Product: Vega USB 2.0 Camera. [ 2.787849] usb 3-2: Manufacturer: Vimicro Corp. [ 2.787896] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.787967] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.788046] usb usb7: Product: EHCI Host Controller [ 2.788113] usb usb7: Manufacturer: Linux 2.6.26-2-amd64 ehci_hcd [ 2.788179] usb usb7: SerialNumber: 0000:00:1d.7 [ 2.791780] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 2.791780] PCI: Setting latency timer of device 0000:03:00.0 to 64 [ 2.791780] sky2 0000:03:00.0: v1.21 addr 0xf0200000 irq 17 Yukon-FE (0xb7) rev 3 [ 2.791780] sky2 eth0: addr 00:13:77:61:5b:7e [ 2.795762] ricoh-mmc: Ricoh MMC controller found at 0000:04:09.3 [1180:0843] (rev 0) [ 2.795762] ricoh-mmc: Controller is now disabled. [ 2.795762] sdhci: SDHCI controller found at 0000:04:09.2 [1180:0822] (rev 18) [ 2.795762] ACPI: PCI Interrupt 0000:04:09.2[C] -> GSI 22 (level, low) -> IRQ 22 [ 2.795762] mmc0: Will use DMA mode even though HW doesn't fully claim to support it. [ 2.795762] mmc0: SDHCI at 0xf0401800 irq 22 DMA [ 2.802721] ACPI: PCI Interrupt 0000:04:09.1[B] -> GSI 21 (level, low) -> IRQ 21 [ 2.856013] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[21] MMIO=[f0401000-f04017ff] Max Packet=[2048] IR/IT contexts=[4/4] [ 2.864491] No dock devices found. [ 2.873767] SCSI subsystem initialized [ 2.885769] libata version 3.00 loaded. [ 2.885769] ata_piix 0000:00:1f.2: version 2.12 [ 2.885769] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 [ 2.885913] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] [ 3.042773] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 3.046622] scsi0 : ata_piix [ 3.046622] scsi1 : ata_piix [ 3.046622] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x18e0 irq 14 [ 3.046622] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18e8 irq 15 [ 3.211439] ata1.00: ATA-8: FUJITSU MHY2200BH, 0000000B, max UDMA/100 [ 3.211509] ata1.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 3.227302] ata1.00: configured for UDMA/100 [ 3.391946] ata2.00: ATAPI: TSSTcorp CDDVDW TS-L632H, SC03, max UDMA/33 [ 3.408693] ata2.00: configured for UDMA/33 [ 3.409027] isa bounce pool size: 16 pages [ 3.409027] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHY2200B 0000 PQ: 0 ANSI: 5 [ 3.411322] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW TS-L632H SC03 PQ: 0 ANSI: 5 [ 3.432375] Driver 'sd' needs updating - please use bus_type methods [ 3.432375] sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB) [ 3.432375] sd 0:0:0:0: [sda] Write Protect is off [ 3.432375] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.432375] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.432375] sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB) [ 3.432375] sd 0:0:0:0: [sda] Write Protect is off [ 3.432375] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.432375] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.432375] sda: sda1 sda2 <<4>Driver 'sr' needs updating - please use bus_type methods [ 4.147527] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0000f0410109134b] [ 4.392039] sda5 > [ 4.392039] sd 0:0:0:0: [sda] Attached SCSI disk [ 4.410249] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 4.410249] Uniform CD-ROM driver Revision: 3.20 [ 4.410290] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 4.425258] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 4.425258] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 4.696157] device-mapper: uevent: version 1.0.3 [ 4.696157] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com [ 4.824888] PM: Starting manual resume from disk [ 4.860971] kjournald starting. Commit interval 5 seconds [ 4.860971] EXT3-fs: mounted filesystem with ordered data mode. [ 6.762590] udevd version 125 started [ 7.676567] agpgart: Detected an Intel 965GM Chipset. [ 7.676567] agpgart: Detected 7676K stolen memory. [ 7.692567] agpgart: AGP aperture is 256M @ 0xd0000000 [ 7.728019] input: Power Button (FF) as /class/input/input2 [ 7.780241] ACPI: Power Button (FF) [PWRF] [ 7.784115] input: Lid Switch as /class/input/input3 [ 7.814165] ACPI: Lid Switch [LID0] [ 7.814320] input: Power Button (CM) as /class/input/input4 [ 7.879691] ACPI: Power Button (CM) [PWRB] [ 7.879905] input: Sleep Button (CM) as /class/input/input5 [ 7.926278] ACPI: Sleep Button (CM) [SLPB] [ 7.930401] ACPI: Battery Slot [BAT1] (battery present) [ 7.943712] ACPI: AC Adapter [ADP1] (off-line) [ 8.338354] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22 [ 8.338354] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 8.369725] hda_codec: Unknown model for ALC262, trying auto-probe from BIOS... [ 8.395775] Linux video capture interface: v2.00 [ 8.403775] ACPI: WMI: Mapper loaded [ 8.595551] uvcvideo: Found UVC 1.00 device Vega USB 2.0 Camera. (0ac8:c302) [ 8.595677] input: Vega USB 2.0 Camera. as /class/input/input6 [ 8.615750] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008) [ 8.615916] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060) [ 8.616026] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 8.627925] usbcore: registered new interface driver uvcvideo [ 8.627999] USB Video Class driver (v0.1.0) [ 8.689433] Yenta: CardBus bridge found at 0000:04:09.0 [144d:c510] [ 8.689462] PCI: Bus 5, cardbus bridge: 0000:04:09.0 [ 8.689528] IO window: 0x00003000-0x000030ff [ 8.689596] IO window: 0x00003400-0x000034ff [ 8.689664] PREFETCH window: 0x88400000-0x887fffff [ 8.689731] MEM window: 0x8c000000-0x8fffffff [ 8.819393] Yenta: ISA IRQ mask 0x0cb8, PCI irq 20 [ 8.819464] Socket status: 30000006 [ 8.819528] Yenta: Raising subordinate bus# of parent bus (#04) from #05 to #08 [ 8.819611] pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff [ 8.819683] pcmcia: parent PCI bridge Memory window: 0xf0400000 - 0xf04fffff [ 8.914416] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks [ 8.914507] iwl3945: Copyright(c) 2003-2008 Intel Corporation [ 8.914507] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 8.914507] PCI: Setting latency timer of device 0000:02:00.0 to 64 [ 8.914507] iwl3945: Detected Intel Wireless WiFi Link 3945BG [ 9.007497] iwl3945: Tunable channels: 11 802.11bg, 0 802.11a channels [ 9.008096] phy0: Selected rate control algorithm 'iwl-3945-rs' [ 9.117636] input: PC Speaker as /class/input/input7 [ 9.184425] ACPI: PCI interrupt for device 0000:02:00.0 disabled [ 9.184562] ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 19 (level, low) -> IRQ 19 [ 9.416346] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04713/0x200000 [ 9.452060] input: SynPS/2 Synaptics TouchPad as /class/input/input8 [ 11.497166] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended [ 11.497612] EXT3 FS on dm-2, internal journal [ 12.594703] loop: module loaded [ 13.387582] kjournald starting. Commit interval 5 seconds [ 13.388559] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended [ 13.388559] EXT3 FS on sda1, internal journal [ 13.388559] EXT3-fs: mounted filesystem with ordered data mode. [ 13.415748] kjournald starting. Commit interval 5 seconds [ 13.415825] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended [ 13.416320] EXT3 FS on dm-0, internal journal [ 13.416443] EXT3-fs: mounted filesystem with ordered data mode. [ 13.472861] Adding 3145720k swap on /dev/mapper/Laptop--Susanne-swap. Priority:-1 extents:1 across:3145720k [ 17.427291] NET: Registered protocol family 10 [ 17.431053] lo: Disabled Privacy Extensions [ 17.800487] pnp: the driver 'parport_pc' has been registered [ 17.805777] lp: driver loaded but no devices found [ 17.899969] ppdev: user-space parallel port driver [ 20.566876] vboxdrv: Trying to deactivate the NMI watchdog permanently... [ 20.566876] vboxdrv: Successfully done. [ 20.566876] vboxdrv: Found 2 processor cores. [ 20.566876] vboxdrv: fAsync=0 u64DiffCores=4800. [ 20.566876] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 20.566876] vboxdrv: Successfully loaded version 1.6.6_OSE (interface 0x00080000). [ 20.992884] warning: `ntpd' uses 32-bit capabilities (legacy support in use) [ 23.122039] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 23.125754] PM: Writing back config space on device 0000:02:00.0 at offset 1 (was 100102, writing 100106) [ 23.125754] firmware: requesting iwlwifi-3945-1.ucode [ 23.248494] Registered led device: iwl-phy0:radio [ 23.248494] Registered led device: iwl-phy0:assoc [ 23.248494] Registered led device: iwl-phy0:RX [ 23.249564] Registered led device: iwl-phy0:TX [ 23.270994] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 23.517786] sky2 eth0: enabling interface [ 23.520889] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 28.444498] [drm] Initialized drm 1.1.0 20060810 [ 28.454552] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 28.454552] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 28.454552] [drm] Initialized i915 1.6.0 20060119 on minor 0 [ 50.241299] CPU0 attaching NULL sched-domain. [ 50.241299] CPU1 attaching NULL sched-domain. [ 50.256741] CPU0 attaching sched-domain: [ 50.256751] domain 0: span 0-1 [ 50.256755] groups: 0 1 [ 50.256761] domain 1: span 0-1 [ 50.256765] groups: 0-1 [ 50.256770] domain 2: span 0-1 [ 50.256773] groups: 0-1 [ 50.256781] CPU1 attaching sched-domain: [ 50.256786] domain 0: span 0-1 [ 50.256791] groups: 1 0 [ 50.256800] domain 1: span 0-1 [ 50.256804] groups: 0-1 [ 50.256812] domain 2: span 0-1 [ 50.256817] groups: 0-1 [ 83.734322] usb 7-1: new high speed USB device using ehci_hcd and address 2 [ 83.867432] usb 7-1: configuration #1 chosen from 1 choice [ 83.867432] usb 7-1: New USB device found, idVendor=1307, idProduct=0163 [ 83.867432] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 83.867432] usb 7-1: Product: USB Mass Storage Device [ 83.867432] usb 7-1: Manufacturer: USBest Technology [ 83.867432] usb 7-1: SerialNumber: 07062200011249 [ 84.053198] Initializing USB Mass Storage driver... [ 84.053346] scsi2 : SCSI emulation for USB Mass Storage devices [ 84.053483] usbcore: registered new interface driver usb-storage [ 84.053493] USB Mass Storage support registered. [ 84.053681] usb-storage: device found at 2 [ 84.053688] usb-storage: waiting for device to settle before scanning [ 89.084713] usb-storage: device scan complete [ 89.086997] scsi 2:0:0:0: Direct-Access Ut163 USB2FlashStorage 0.00 PQ: 0 ANSI: 2 [ 89.088866] sd 2:0:0:0: [sdb] 3948543 512-byte hardware sectors (2022 MB) [ 89.092163] sd 2:0:0:0: [sdb] Write Protect is off [ 89.092163] sd 2:0:0:0: [sdb] Mode Sense: 00 00 00 00 [ 89.092163] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 89.092163] sd 2:0:0:0: [sdb] 3948543 512-byte hardware sectors (2022 MB) [ 89.092163] sd 2:0:0:0: [sdb] Write Protect is off [ 89.092163] sd 2:0:0:0: [sdb] Mode Sense: 00 00 00 00 [ 89.092163] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 89.092163] sdb: sdb1 sdb2 sdb3 [ 89.195401] sd 2:0:0:0: [sdb] Attached SCSI removable disk [ 89.195450] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 111.223140] kjournald starting. Commit interval 5 seconds [ 111.223675] EXT3-fs warning: checktime reached, running e2fsck is recommended [ 111.231746] EXT3 FS on sdb3, internal journal [ 111.231759] EXT3-fs: mounted filesystem with ordered data mode. [ 116.024705] kjournald starting. Commit interval 5 seconds [ 116.024705] EXT3-fs warning: checktime reached, running e2fsck is recommended [ 116.030860] EXT3 FS on sdb2, internal journal [ 116.030860] EXT3-fs: mounted filesystem with ordered data mode. [ 121.722561] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
# Local changes blacklist video options iwl3945 disable_hw_scan=1 options cfg80211 ieee80211_regdom=EU options lbm_cw_cfg80211 ieee80211_regdom=EU
Attachment:
signature.asc
Description: Dies ist ein digital signierter Nachrichtenteil