--- Begin Message ---
Package: linux-image-2.6.26-2-686
Version: 2.6.26-15lenny3
Severity: serious
Justification: 2
As per summary. In some installations of this kernel, a file /etc/kernel-img.conf is created with a postinst reference to a non-existent /sbin/update-grud.
The result is that aptitude keeps reinstalling this package.
On systems where this problem occurs, the /etc/kernal-img.conf file has an incorrect reference.
-- Package-specific info:
** Version:
Linux version 2.6.26-2-686 (Debian 2.6.26-15lenny3) (dannf@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Thu May 28 15:39:35 UTC 2009
** Command line:
BOOT_IMAGE=/vmlinuz-2.6.26-2-686 root=UUID=ed080c92-d702-47ca-9892-1d9590eefc0f ro
** Not tainted
** Kernel log:
[ 5.106545] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 5.107946] mice: PS/2 mouse device common for all mice
[ 5.109331] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 5.109481] rtc0: alarms up to one day
[ 5.109904] cpuidle: using governor ladder
[ 5.109998] cpuidle: using governor menu
[ 5.110106] No iBFT detected.
[ 5.114171] TCP cubic registered
[ 5.114271] NET: Registered protocol family 17
[ 5.114390] Using IPI No-Shortcut mode
[ 5.115673] registered taskstats version 1
[ 5.116431] rtc_cmos 00:03: setting system clock to 2009-06-19 17:09:37 UTC (1245431377)
[ 5.118213] Freeing unused kernel memory: 244k freed
[ 5.142671] input: AT Translated Set 2 keyboard as /class/input/input0
[ 5.924232] thermal: Unknown symbol acpi_processor_set_thermal_limit
[ 8.935474] usbcore: registered new interface driver usbfs
[ 8.935806] usbcore: registered new interface driver hub
[ 8.936327] usbcore: registered new device driver usb
[ 8.971138] SCSI subsystem initialized
[ 8.987540] Linux Tulip driver version 1.1.15-NAPI (Feb 27, 2007)
[ 8.987823] PCI: setting IRQ 10 as level-triggered
[ 8.987848] PCI: Found IRQ 10 for device 0000:00:0c.0
[ 8.988567] tulip0: MII transceiver #1 config 3000 status 7829 advertising 01e1.
[ 8.993838] eth0: Lite-On 82c168 PNIC rev 32 at Port 0x6c00, 00:a0:cc:56:91:5f, IRQ 10.
[ 9.007552] Floppy drive(s): fd0 is 1.44M
[ 9.022822] USB Universal Host Controller Interface driver v3.0
[ 9.023200] uhci_hcd 0000:00:07.2: UHCI Host Controller
[ 9.023783] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
[ 9.023988] uhci_hcd 0000:00:07.2: irq 10, io base 0x00006400
[ 9.024795] usb usb1: configuration #1 chosen from 1 choice
[ 9.025143] hub 1-0:1.0: USB hub found
[ 9.025282] hub 1-0:1.0: 2 ports detected
[ 9.148046] FDC 0 is a post-1991 82077
[ 9.149481] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 9.149595] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 9.149710] usb usb1: Product: UHCI Host Controller
[ 9.149801] usb usb1: Manufacturer: Linux 2.6.26-2-686 uhci_hcd
[ 9.149895] usb usb1: SerialNumber: 0000:00:07.2
[ 9.150246] hub 1-0:1.0: over-current change on port 1
[ 9.219738] libata version 3.00 loaded.
[ 9.225752] PCI: setting IRQ 11 as level-triggered
[ 9.225783] PCI: Found IRQ 11 for device 0000:00:0a.0
[ 24.268196] scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
[ 24.268215] <Adaptec 2940A Ultra SCSI adapter>
[ 24.268227] aic7860: Ultra Single Channel A, SCSI Id=7, 3/253 SCBs
[ 24.268240]
[ 24.361419] scsi 0:0:0:0: Direct-Access QUANTUM FIREBALL ST6.4S 0F0C PQ: 0 ANSI: 2
[ 24.361624] scsi0:A:0:0: Tagged Queuing enabled. Depth 8
[ 24.361821] target0:0:0: Beginning Domain Validation
[ 24.366392] Uniform Multi-Platform E-IDE driver
[ 24.366522] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 24.371205] target0:0:0: FAST-10 SCSI 10.0 MB/s ST (100 ns, offset 15)
[ 24.376850] target0:0:0: Domain Validation skipping write tests
[ 24.376970] target0:0:0: Ending Domain Validation
[ 24.398976] PIIX4: IDE controller (0x8086:0x7111 rev 0x01) at PCI slot 0000:00:07.1
[ 24.399184] PIIX4: not 100% native mode: will probe irqs later
[ 24.399318] ide0: BM-DMA at 0xf000-0xf007
[ 24.399437] ide1: BM-DMA at 0xf008-0xf00f
[ 24.399538] Probing IDE interface ide0...
[ 24.968417] Probing IDE interface ide1...
[ 25.536390] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 25.536644] ide1 at 0x170-0x177,0x376 on irq 15
[ 26.086885] Driver 'sd' needs updating - please use bus_type methods
[ 26.096422] sd 0:0:0:0: [sda] 12772516 512-byte hardware sectors (6540 MB)
[ 26.106071] sd 0:0:0:0: [sda] Write Protect is off
[ 26.106180] sd 0:0:0:0: [sda] Mode Sense: 9f 00 00 08
[ 26.112985] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 26.115642] sd 0:0:0:0: [sda] 12772516 512-byte hardware sectors (6540 MB)
[ 26.125209] sd 0:0:0:0: [sda] Write Protect is off
[ 26.125313] sd 0:0:0:0: [sda] Mode Sense: 9f 00 00 08
[ 26.132277] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 26.132428] sda: sda1 sda2 sda3
[ 26.177144] sd 0:0:0:0: [sda] Attached SCSI disk
[ 27.144687] PM: Starting manual resume from disk
[ 27.366277] kjournald starting. Commit interval 5 seconds
[ 27.366468] EXT3-fs: mounted filesystem with ordered data mode.
[ 32.202153] udevd version 125 started
[ 37.921123] input: PC Speaker as /class/input/input1
[ 39.785133] parport_pc 00:0e: reported by Plug and Play BIOS
[ 39.785336] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 41.256860] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 41.421030] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 41.952768] Linux agpgart interface v0.103
[ 42.074680] piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device
[ 42.142977] agpgart: Detected an Intel 440LX Chipset.
[ 42.153026] agpgart: AGP aperture is 64M @ 0xe0000000
[ 42.660879] Error: Driver 'pcspkr' is already registered, aborting...
[ 43.348866] input: ImPS/2 Generic Wheel Mouse as /class/input/input2
[ 47.656953] Adding 248996k swap on /dev/sda2. Priority:-1 extents:1 across:248996k
[ 48.605319] EXT3 FS on sda3, internal journal
[ 51.370428] device-mapper: uevent: version 1.0.3
[ 51.376025] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
[ 52.696589] kjournald starting. Commit interval 5 seconds
[ 52.700406] EXT3 FS on sda1, internal journal
[ 52.700558] EXT3-fs: mounted filesystem with ordered data mode.
[ 58.398828] NET: Registered protocol family 10
[ 58.402671] lo: Disabled Privacy Extensions
[ 58.480481] eth0: Setting full-duplex based on MII#1 link partner capability of 45e1.
[ 69.084311] eth0: no IPv6 routers present
[ 70.892852] warning: `ntpd' uses 32-bit capabilities (legacy support in use)
** Loaded modules:
Module Size Used by
ipv6 235364 16
dm_snapshot 14340 0
dm_mirror 15104 0
dm_log 8484 1 dm_mirror
dm_mod 46184 3 dm_snapshot,dm_mirror,dm_log
ide_disk 10496 0
ide_cd_mod 27652 0
cdrom 30176 1 ide_cd_mod
psmouse 32336 0
snd_pcm 62596 0
intel_agp 22556 1
i2c_piix4 7216 0
serio_raw 4740 0
snd_timer 17800 1 snd_pcm
agpgart 28776 1 intel_agp
i2c_core 19828 1 i2c_piix4
snd 45604 2 snd_pcm,snd_timer
soundcore 6368 1 snd
shpchp 25528 0
snd_page_alloc 7816 1 snd_pcm
pci_hotplug 23460 1 shpchp
parport_pc 22500 0
parport 30988 1 parport_pc
pcspkr 2432 0
evdev 8000 0
ext3 105512 2
jbd 39444 1 ext3
mbcache 7108 1 ext3
sd_mod 22200 4
piix 6568 0 [permanent]
ide_pci_generic 3908 0 [permanent]
ide_core 96136 4 ide_disk,ide_cd_mod,piix,ide_pci_generic
ata_generic 4676 0
aic7xxx 117592 3
scsi_transport_spi 19840 1 aic7xxx
libata 140416 1 ata_generic
uhci_hcd 18672 0
floppy 47748 0
tulip 44064 0
scsi_mod 129324 4 sd_mod,aic7xxx,scsi_transport_spi,libata
usbcore 118224 2 uhci_hcd
dock 8304 1 libata
thermal_sys 10856 0
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 440LX/EX - 82443LX/EX Host bridge [8086:7180] (rev 03)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 64
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=64M]
Capabilities: [a0] AGP version 1.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
Kernel driver in use: agpgart-intel
Kernel modules: intel-agp
00:01.0 PCI bridge [0604]: Intel Corporation 440LX/EX - 82443LX/EX AGP bridge [8086:7181] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: de000000-dfffffff
Prefetchable memory behind bridge: a8000000-afffffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Kernel modules: shpchp
00:07.0 ISA bridge [0601]: Intel Corporation 82371AB/EB/MB PIIX4 ISA [8086:7110] (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:07.1 IDE interface [0101]: Intel Corporation 82371AB/EB/MB PIIX4 IDE [8086:7111] (rev 01) (prog-if 80 [Master])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
Region 4: I/O ports at f000 [size=16]
Kernel driver in use: PIIX_IDE
Kernel modules: piix
00:07.2 USB Controller [0c03]: Intel Corporation 82371AB/EB/MB PIIX4 USB [8086:7112] (rev 01) (prog-if 00 [UHCI])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin D routed to IRQ 10
Region 4: I/O ports at 6400 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:07.3 Bridge [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ACPI [8086:7113] (rev 02)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin ? routed to IRQ 9
Kernel driver in use: piix4_smbus
Kernel modules: i2c-piix4
00:0a.0 SCSI storage controller [0100]: Adaptec AIC-7861 [9004:6178] (rev 03)
Subsystem: Adaptec AHA-2940AU Single [9004:7861]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (1000ns min, 1000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at 6800 [disabled] [size=256]
Region 1: Memory at e4000000 (32-bit, non-prefetchable) [size=4K]
[virtual] Expansion ROM at 20040000 [disabled] [size=64K]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: aic7xxx
Kernel modules: aic7xxx
00:0c.0 Ethernet controller [0200]: Lite-On Communications Inc LNE100TX [11ad:0002] (rev 20)
Subsystem: Netgear FA310TX [1385:f004]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at 6c00 [size=256]
Region 1: Memory at e4001000 (32-bit, non-prefetchable) [size=256]
[virtual] Expansion ROM at 20000000 [disabled] [size=256K]
Kernel driver in use: tulip
Kernel modules: tulip
01:00.0 VGA compatible controller [0300]: nVidia Corporation NV15 [GeForce2 GTS/Pro] [10de:0150] (rev a4) (prog-if 00 [VGA controller])
Subsystem: nVidia Corporation GeForce2 GTS [10de:002e]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 9
Region 0: Memory at de000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at a8000000 (32-bit, prefetchable) [size=128M]
[virtual] Expansion ROM at df000000 [disabled] [size=64K]
Capabilities: [60] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [44] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA- ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
Kernel modules: nvidiafb
-- System Information:
Debian Release: 5.0.1
APT prefers stable
APT policy: (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 2.6.26-2-686 (SMP w/1 CPU core)
Locale: LANG=en_AU, LC_CTYPE=en_AU (charmap=ISO-8859-1)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.26-2-686 depends on:
ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92o tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.26-2-686 recommends:
ii libc6-i686 2.7-18 GNU C Library: Shared libraries [i
Versions of packages linux-image-2.6.26-2-686 suggests:
ii grub-pc [grub] 1.96+20080724-16 GRand Unified Bootloader, version
pn linux-doc-2.6.26 <none> (no description available)
-- debconf information:
linux-image-2.6.26-2-686/postinst/bootloader-error-2.6.26-2-686:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.26-2-686/postinst/old-dir-initrd-link-2.6.26-2-686: true
linux-image-2.6.26-2-686/preinst/overwriting-modules-2.6.26-2-686: true
linux-image-2.6.26-2-686/postinst/bootloader-test-error-2.6.26-2-686:
linux-image-2.6.26-2-686/postinst/depmod-error-2.6.26-2-686: false
linux-image-2.6.26-2-686/preinst/bootloader-initrd-2.6.26-2-686: true
linux-image-2.6.26-2-686/preinst/abort-overwrite-2.6.26-2-686:
linux-image-2.6.26-2-686/preinst/abort-install-2.6.26-2-686:
linux-image-2.6.26-2-686/postinst/depmod-error-initrd-2.6.26-2-686: false
linux-image-2.6.26-2-686/postinst/create-kimage-link-2.6.26-2-686: true
linux-image-2.6.26-2-686/preinst/failed-to-move-modules-2.6.26-2-686:
linux-image-2.6.26-2-686/preinst/initrd-2.6.26-2-686:
linux-image-2.6.26-2-686/preinst/lilo-has-ramdisk:
linux-image-2.6.26-2-686/prerm/would-invalidate-boot-loader-2.6.26-2-686: true
linux-image-2.6.26-2-686/postinst/kimage-is-a-directory:
linux-image-2.6.26-2-686/postinst/old-initrd-link-2.6.26-2-686: true
linux-image-2.6.26-2-686/preinst/elilo-initrd-2.6.26-2-686: true
linux-image-2.6.26-2-686/preinst/lilo-initrd-2.6.26-2-686: true
linux-image-2.6.26-2-686/prerm/removing-running-kernel-2.6.26-2-686: true
linux-image-2.6.26-2-686/postinst/old-system-map-link-2.6.26-2-686: true
--- End Message ---