[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#525361: "bulk_write" too big log writing "bulk_write error" usbcore linux? cups? or hplip?...

Package: linux-image-2.6.29-1-686
Version: 2.6.29-1-686

Package: cups
Version: 1.3.10-1

Package: hplip
Version: 3.9.2-3


I still have the same error, the last kernel was 2.6.26 and now the .29
But i have still this error, i saw something about "bulk_write"
https://bugs.launchpad.net/hplip/+bug/341827
https://bugs.launchpad.net/bugs/344592

This bug start to write that i put on "cat /var/log/syslog" over and over and over... doesn't stop, but when i restart CUPS this error stops, the jobs in the queuque delete for get again working it, i don't know which package have this bad working, linux kernel (usbcore), cups or hplip?....


 
cat /var/log/syslog
Apr 23 16:00:52 Maximiliano HP_LaserJet_P1005?serial=
L403C4P: io/hpmud/musb.c 1022: bulk_write failed buf=0xbfb814cc size=8192 len=-19: No data available
Apr 23 16:00:52 Maximiliano HP_LaserJet_P1005?serial=L403C4P: io/hpmud/musb.c 1384: unable to write data hp:/usb/HP_LaserJet_P1005?serial=L403C4P: No data available

uname -a
Linux Maximiliano 2.6.29-1-686 #1 SMP Fri Apr 17 14:35:16 UTC 2009 i686 GNU/Linux

dmesg
[35421.149186] usb 1-2: USB disconnect, address 18                             
[35422.916048] usb 1-2: new high speed USB device using ehci_hcd and address 19
[35423.069035] usb 1-2: New USB device found, idVendor=03f0, idProduct=3d17
[35423.069049] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[35423.069055] usb 1-2: Product: HP LaserJet P1005
[35423.069059] usb 1-2: Manufacturer: Hewlett-Packard
[35423.069063] usb 1-2: SerialNumber: L403C4P
[35423.069215] usb 1-2: configuration #1 chosen from 1 choice
[35423.075220] usblp0: USB Bidirectional printer dev 19 if 0 alt 0 proto 2 vid 0x03F0 pid 0x3D17
[35427.638307] usblp0: removed
[35432.728059] usb 1-2: usbfs: USBDEVFS_CONTROL failed cmd python rqt 128 rq 6 len 255 ret -110
[35453.292176] usb 1-2: usbfs: USBDEVFS_CONTROL failed cmd hp rqt 128 rq 6 len 255 ret -110
[35454.248121] usb 1-2: usbfs: USBDEVFS_CONTROL failed cmd hpijs rqt 128 rq 6 len 255 ret -110
[35487.637631] usb 1-2: USB disconnect, address 19
[35488.216137] usb 2-2: new full speed USB device using ohci_hcd and address 12
[35488.400556] usb 2-2: device descriptor read/64, error -62
[35488.688069] usb 2-2: device descriptor read/64, error -62
[35488.968092] usb 2-2: new full speed USB device using ohci_hcd and address 13
[35489.152086] usb 2-2: device descriptor read/64, error -62
[35489.436035] usb 2-2: device descriptor read/64, error -62
[35489.660137] hub 2-0:1.0: unable to enumerate USB device on port 2
[35644.748052] usb 1-2: new high speed USB device using ehci_hcd and address 21
[35644.900777] usb 1-2: New USB device found, idVendor=03f0, idProduct=3d17
[35644.900787] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[35644.900790] usb 1-2: Product: HP LaserJet P1005
[35644.900793] usb 1-2: Manufacturer: Hewlett-Packard
[35644.900795] usb 1-2: SerialNumber: L403C4P
[35644.900896] usb 1-2: configuration #1 chosen from 1 choice
[35644.909104] usblp0: USB Bidirectional printer dev 21 if 0 alt 0 proto 2 vid 0x03F0 pid 0x3D17
[35649.226787] usblp0: removed
[36518.443392] usb 1-2: USB disconnect, address 21


lsusb -v
Bus 001 Device 022: ID 03f0:3d17 Hewlett-Packard
Device Descriptor:                              
  bLength                18                     
  bDescriptorType         1                     
  bcdUSB               2.00                     
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0                            
  bDeviceProtocol         0                            
  bMaxPacketSize0        64                            
  idVendor           0x03f0 Hewlett-Packard            
  idProduct          0x3d17                            
  bcdDevice            1.00                            
  iManufacturer           1                            
  iProduct                2 HP LaserJet P1005          
  iSerial                 3 L403C4P                    
  bNumConfigurations      1                            
  Configuration Descriptor:                            
    bLength                 9                          
    bDescriptorType         2                          
    wTotalLength           32                          
    bNumInterfaces          1                          
    bConfigurationValue     1                          
    iConfiguration          0                          
    bmAttributes         0xc0                          
      Self Powered                                     
    MaxPower               98mA                        
    Interface Descriptor:                              
      bLength                 9                        
      bDescriptorType         4                        
      bInterfaceNumber        0                        
      bAlternateSetting       0                        
      bNumEndpoints           2                        
      bInterfaceClass         7 Printer                
      bInterfaceSubClass      1 Printer                
      bInterfaceProtocol      2 Bidirectional          
      iInterface              0                        
      Endpoint Descriptor:                             
        bLength                 7                      
        bDescriptorType         5                      
        bEndpointAddress     0x01  EP 1 OUT            
        bmAttributes            2                      
          Transfer Type            Bulk                
          Synch Type               None                
          Usage Type               Data                
        wMaxPacketSize     0x0200  1x 512 bytes        
        bInterval               0                      
      Endpoint Descriptor:                             
        bLength                 7                      
        bDescriptorType         5                      
        bEndpointAddress     0x81  EP 1 IN             
        bmAttributes            2                      
          Transfer Type            Bulk                
          Synch Type               None                
          Usage Type               Data                
        wMaxPacketSize     0x0200  1x 512 bytes        
        bInterval               0                      
Device Qualifier (for other device speed):             
  bLength                10                            
  bDescriptorType         6                            
  bcdUSB               2.00                            
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0                            
  bDeviceProtocol         0                            
  bMaxPacketSize0        64                            
  bNumConfigurations      1                            
Device Status:     0x0001                              
  Self Powered       

cat /var/log/debug

1005_2                                                                         
Apr 23 16:03:33 Maximiliano hal_lpadmin: Found configured printer: HP_LaserJet_P1005                                                                           
Apr 23 17:20:15 Maximiliano hal_lpadmin: add                                   
Apr 23 17:20:16 Maximiliano hal_lpadmin: URIs: ['hp:/usb/HP_LaserJet_P1005?serial=L403C4P', 'usb://HP/LaserJet%20P1005', 'hal:///org/freedesktop/Hal/devices/usb_device_3f0_3d17_L403C4P_if0_printer_noserial']                                
Apr 23 17:20:16 Maximiliano hal_lpadmin: HPLIP Fax URIs: None                  
Apr 23 17:20:16 Maximiliano hal_lpadmin: Not adding printer: HP_LaserJet_P1005_2 already exists                                                                
Apr 23 17:20:16 Maximiliano hal_lpadmin: Not adding printer: HP_LaserJet_P1005 already exists                                                                  
Apr 23 17:20:18 Maximiliano hal_lpadmin: remove                                
Apr 23 17:20:18 Maximiliano hal_lpadmin: Found configured printer: HP_LaserJet_P1005_2                                                                         
Apr 23 17:20:18 Maximiliano hal_lpadmin: Found configured printer: HP_LaserJet_P1005                                                                           
Apr 23 17:20:29 Maximiliano kernel: [40266.924146] usb 1-2: usbfs: USBDEVFS_CONTROL failed cmd lsusb rqt 128 rq 6 len 255 ret -110   

---------- Forwarded message ----------
From: Maximi89 <maximi89@gmail.com>
Date: 2009/4/23
Subject: Re: [Bug 344592] Re: Unkown Error 1018. I Can't Print, the printers looks fine, HP-toolbox show the info... but doesn't print nothing, and CUPS say the print file was completed...
To: Bug 344592 <344592@bugs.launchpad.net>




2009/4/7 Maximi89 <maximi89@gmail.com>


2009/4/7 Maximi89 <maximi89@gmail.com>



2009/3/30 Aaron Albright <ke7ezt@gmail.com>

Not a debian defect.

Aaron

** Changed in: debian
      Status: New => Invalid

** Changed in: hplip
      Status: New => Invalid

** bug changed to question:
  https://answers.launchpad.net/hplip/+question/65890

--
Unkown Error 1018. I Can't Print, the printers looks fine, HP-toolbox show the info... but doesn't print nothing, and CUPS say the print file was completed...
https://bugs.launchpad.net/bugs/344592
You received this bug notification because you are a direct subscriber
of the bug.

Ok, i get the info again... here we go...


maximi89@Maximiliano:~$ /usr/lib/cups/backend/hp
direct hp:/usb/HP_LaserJet_P1005?serial=L403C4P "HP LaserJet P1005" "HP LaserJet P1005 USB L403C4P HPLIP" "MFG:HP;MDL:HP LaserJet P1005;CLS:PRINTER;DES:HP LaserJet P1005;SN:L403C4P;"

CAT /var/log/syslog
Apr  7 22:24:49 Maximiliano HP_LaserJet_P1005?serial=L403C4P: io/hpmud/musb.c 1022: bulk_write failed buf=0xbf9a236c size=4096 len=-19: Invalid argument
Apr  7 22:24:49 Maximiliano HP_LaserJet_P1005?serial=L403C4P: io/hpmud/musb.c 1384: unable to write data hp:/usb/HP_LaserJet_P1005?serial=L403C4P: Invalid argument
Apr  7 22:24:49 Maximiliano HP_LaserJet_P1005?serial=L403C4P: io/hpmud/musb.c 1022: bulk_write failed buf=0xbf9a236c size=4096 len=-19: Invalid argument
Apr  7 22:24:49 Maximiliano HP_LaserJet_P1005?serial=L403C4P: io/hpmud/musb.c 1384: unable to write data hp:/usb/HP_LaserJet_P1005?serial=L403C4P: Invalid argument
Apr  7 22:24:49 Maximiliano HP_LaserJet_P1005?serial=L403C4P: io/hpmud/musb.c 1022: bulk_write failed buf=0xbf9a236c size=4096 len=-19: Invalid argument
Apr  7 22:24:49 Maximiliano HP_LaserJet_P1005?serial=L403C4P: io/hpmud/musb.c 1384: unable to write data hp:/usb/HP_LaserJet_P1005?serial=L403C4P: Invalid argument
Apr  7 22:24:49 Maximiliano HP_LaserJet_P1005?serial=L403C4P: io/hpmud/musb.c 1022: bulk_write failed buf=0xbf9a236c size=4096 len=-19: Invalid argument
Apr  7 22:24:49 Maximiliano HP_LaserJet_P1005?serial=L403C4P: io/hpmud/musb.c 1384: unable to write data hp:/usb/HP_LaserJet_P1005?serial=L403C4P: Invalid argument
 

CAT /var/log/syslog

04: unable to open hp:/usb/HP_LaserJet_P1005?serial=L403C4P
Apr  6 23:23:18 Maximiliano HP_LaserJet_P1005?serial=L403C4P: prnt/backend/hp.c 676: INFO: open device failed stat=12; will retry in 30 seconds...
Apr  6 23:23:48 Maximiliano HP_LaserJet_P1005?serial=L403C4P: io/hpmud/musb.c 1104: unable to open hp:/usb/HP_LaserJet_P1005?serial=L403C4P
Apr  6 23:23:48 Maximiliano HP_LaserJet_P1005?serial=L403C4P: prnt/backend/hp.c 676: INFO: open device failed stat=12; will retry in 30 seconds...
Apr  6 23:24:18 Maximiliano HP_LaserJet_P1005?serial=L403C4P: io/hpmud/musb.c 1104: unable to open hp:/usb/HP_LaserJet_P1005?serial=L403C4P
Apr  6 23:24:18 Maximiliano HP_LaserJet_P1005?serial=L403C4P: prnt/backend/hp.c 676: INFO: open device failed stat=12; will retry in 30 seconds...
Apr  6 23:24:48 Maximiliano HP_LaserJet_P1005?serial=L403C4P: io/hpmud/musb.c 1104: unable to open hp:/usb/HP_LaserJet_P1005?serial=L403C4P
Apr  6 23:24:48 Maximiliano HP_LaserJet_P1005?serial=L403C4P: prnt/backend/hp.c 676: INFO: open device failed stat=12; will retry in 30 seconds...
Apr  6 23:25:18 Maximiliano HP_LaserJet_P1005?serial=L403C4P: io/hpmud/musb.c 1104: unable to open hp:/usb/HP_LaserJet_P1005?serial=L403C4P
Apr  6 23:25:18 Maximiliano HP_LaserJet_P1005?serial=L403C4P: prnt/backend/hp.c 676: INFO: open device failed stat=12; will retry in 30 seconds...
Apr  6 23:25:48 Maximiliano HP_LaserJet_P1005?serial=L403C4P: io/hpmud/musb.c 1104: unable to open hp:/usb/HP_LaserJet_P1005?serial=L403C4P
Apr  6 23:25:48 Maximiliano HP_LaserJet_P1005?serial=L403C4P: prnt/backend/hp.c 676: INFO: open device failed stat=12; will retry in 30 seconds...
 



Dmesg

[20950.551087] sd 1:0:0:0: [sdb] Starting disk
[20950.568010] sd 2:0:0:0: [sdc] Starting disk
[20951.108029] usb 2-7: reset low speed USB device using ohci_hcd and address 3
[20951.808022] usb 2-9: reset low speed USB device using ohci_hcd and address 4
[20952.216303] Restarting tasks ... done.
[20952.460047] usb 1-8: new high speed USB device using ehci_hcd and address 5
[20952.541461] dmfe: Change Speed to 100Mhz full duplex
[20952.613234] usb 1-8: configuration #1 chosen from 1 choice
[20952.613420] usb 1-8: New USB device found, idVendor=03f0, idProduct=3d17
[20952.613424] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[20952.613426] usb 1-8: Product: HP LaserJet P1005
[20952.613429] usb 1-8: Manufacturer: Hewlett-Packard
[20952.613431] usb 1-8: SerialNumber: L403C4P
[20959.338527] usb 1-8: USB disconnect, address 5
[27803.632117] usb 1-8: new high speed USB device using ehci_hcd and address 6
[27803.784817] usb 1-8: configuration #1 chosen from 1 choice
[27803.785132] usb 1-8: New USB device found, idVendor=03f0, idProduct=3d17
[27803.785135] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[27803.785138] usb 1-8: Product: HP LaserJet P1005
[27803.785140] usb 1-8: Manufacturer: Hewlett-Packard
[27803.785143] usb 1-8: SerialNumber: L403C4P

cat /var/log/cups/error_log

D [06/Apr/2009:23:30:33 -0400] cupsdCloseClient: 22
D [06/Apr/2009:23:30:33 -0400] cupsdReadClient: 19 POST / HTTP/1.1
D [06/Apr/2009:23:30:33 -0400] cupsdAuthorize: No authentication data provided.
D [06/Apr/2009:23:30:33 -0400] Get-Printer-Attributes ipp://localhost/printers/HP_LaserJet_P1005
D [06/Apr/2009:23:30:33 -0400] cupsdProcessIPPRequest: 19 status_code=0 (successful-ok)
D [06/Apr/2009:23:30:33 -0400] cupsdCloseClient: 19
D [06/Apr/2009:23:30:43 -0400] cupsdAcceptClient: 19 from localhost (Domain)
D [06/Apr/2009:23:30:43 -0400] cupsdAcceptClient: 22 from localhost (Domain)
D [06/Apr/2009:23:30:43 -0400] cupsdCloseClient: 19
D [06/Apr/2009:23:30:43 -0400] cupsdAcceptClient: 19 from localhost (Domain)
D [06/Apr/2009:23:30:43 -0400] cupsdCloseClient: 22
D [06/Apr/2009:23:30:43 -0400] cupsdAcceptClient: 22 from localhost (Domain)
D [06/Apr/2009:23:30:43 -0400] cupsdCloseClient: 19
D [06/Apr/2009:23:30:43 -0400] cupsdCloseClient: 22
D [06/Apr/2009:23:30:48 -0400] [Job 167] prnt/backend/hp.c 676: INFO: open device failed stat=12; will retry in 30 seconds...
D [06/Apr/2009:23:30:53 -0400] cupsdAcceptClient: 19 from localhost (Domain)
D [06/Apr/2009:23:30:53 -0400] cupsdAcceptClient: 22 from localhost (Domain)
D [06/Apr/2009:23:30:53 -0400] cupsdCloseClient: 19
D [06/Apr/2009:23:30:53 -0400] cupsdAcceptClient: 19 from localhost (Domain)
D [06/Apr/2009:23:30:53 -0400] cupsdCloseClient: 22
D [06/Apr/2009:23:30:53 -0400] cupsdAcceptClient: 22 from localhost (Domain)
D [06/Apr/2009:23:30:53 -0400] cupsdCloseClient: 19
D [06/Apr/2009:23:30:53 -0400] cupsdAcceptClient: 19 from localhost (Domain)
D [06/Apr/2009:23:30:53 -0400] cupsdCloseClient: 22
D [06/Apr/2009:23:30:53 -0400] cupsdReadClient: 19 POST / HTTP/1.1
D [06/Apr/2009:23:30:53 -0400] cupsdAuthorize: No authentication data provided.
D [06/Apr/2009:23:30:53 -0400] Get-Jobs ipp://localhost/printers/HP_LaserJet_P1005_2
D [06/Apr/2009:23:30:53 -0400] cupsdProcessIPPRequest: 19 status_code=0 (successful-ok)
D [06/Apr/2009:23:30:53 -0400] cupsdReadClient: 19 POST / HTTP/1.1
D [06/Apr/2009:23:30:53 -0400] cupsdAuthorize: No authentication data provided.
D [06/Apr/2009:23:30:53 -0400] Get-Printer-Attributes ipp://localhost/printers/HP_LaserJet_P1005_2
D [06/Apr/2009:23:30:53 -0400] cupsdProcessIPPRequest: 19 status_code=0 (successful-ok)
D [06/Apr/2009:23:30:53 -0400] cupsdCloseClient: 19


cat /var/log/debug

 00 3a 00 00
Apr  5 22:41:43 Maximiliano kernel: [15388.484648] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
Apr  5 22:41:43 Maximiliano kernel: [15388.516885] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Apr  6 21:14:33 Maximiliano kernel: [20949.940204] ACPI handle has no context!
Apr  6 21:14:33 Maximiliano kernel: [20949.960008] PCI: Setting latency timer of device 0000:00:02.0 to 64
Apr  6 21:14:33 Maximiliano kernel: [20950.015658] PCI: Setting latency timer of device 0000:00:02.1 to 64
Apr  6 21:14:33 Maximiliano kernel: [20950.015683] PCI: cache line size of 64 is not supported by device 0000:00:02.1
Apr  6 21:14:33 Maximiliano kernel: [20950.015697] PM: Writing back config space on device 0000:00:04.0 at offset 1 (was b00007, writing b00003)
Apr  6 21:14:33 Maximiliano kernel: [20950.015707] PCI: Setting latency timer of device 0000:00:04.0 to 64
Apr  6 21:14:33 Maximiliano kernel: [20950.023714] PM: Writing back config space on device 0000:00:07.0 at offset 1 (was b00003, writing b00007)
Apr  6 21:14:33 Maximiliano kernel: [20950.023723] PCI: Setting latency timer of device 0000:00:07.0 to 64
Apr  6 21:14:33 Maximiliano kernel: [20950.023745] PM: Writing back config space on device 0000:00:08.0 at offset 1 (was b00003, writing b00007)
Apr  6 21:14:33 Maximiliano kernel: [20950.023754] PCI: Setting latency timer of device 0000:00:08.0 to 64
Apr  6 21:14:33 Maximiliano kernel: [20950.023770] PCI: Setting latency timer of device 0000:00:09.0 to 64
Apr  6 21:14:33 Maximiliano kernel: [20950.023794] PCI: Setting latency timer of device 0000:00:0d.0 to 64
Apr  6 21:14:33 Maximiliano kernel: [20950.023817] PCI: Setting latency timer of device 0000:00:0e.0 to 64
Apr  6 21:14:33 Maximiliano kernel: [20950.037645] PM: Writing back config space on device 0000:01:08.0 at offset 1 (was 2100003, writing 2100007)
Apr  6 21:14:33 Maximiliano kernel: [20950.439739] hdb: host max PIO5 wanted PIO255(auto-tune) selected PIO4
Apr  6 21:14:33 Maximiliano kernel: [20950.512312] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
Apr  6 21:14:33 Maximiliano kernel: [20950.520414] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
Apr  6 21:14:33 Maximiliano kernel: [20950.551087] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00


uname -a
Linux Maximiliano 2.6.26-1-686 #1 SMP Sat Jan 10 18:29:31 UTC 2009 i686 GNU/Linux

cat /var/log/user.log

04: unable to open hp:/usb/HP_LaserJet_P1005?serial=L403C4P
Apr  6 23:32:48 Maximiliano HP_LaserJet_P1005?serial=L403C4P: prnt/backend/hp.c 676: INFO: open device failed stat=12; will retry in 30 seconds...
Apr  6 23:33:18 Maximiliano HP_LaserJet_P1005?serial=L403C4P: io/hpmud/musb.c 1104: unable to open hp:/usb/HP_LaserJet_P1005?serial=L403C4P
Apr  6 23:33:18 Maximiliano HP_LaserJet_P1005?serial=L403C4P: prnt/backend/hp.c 676: INFO: open device failed stat=12; will retry in 30 seconds...
Apr  6 23:33:48 Maximiliano HP_LaserJet_P1005?serial=L403C4P: io/hpmud/musb.c 1104: unable to open hp:/usb/HP_LaserJet_P1005?serial=L403C4P
Apr  6 23:33:48 Maximiliano HP_LaserJet_P1005?serial=L403C4P: prnt/backend/hp.c 676: INFO: open device failed stat=12; will retry in 30 seconds...
Apr  6 23:34:18 Maximiliano HP_LaserJet_P1005?serial=L403C4P: io/hpmud/musb.c 1104: unable to open hp:/usb/HP_LaserJet_P1005?serial=L403C4P
Apr  6 23:34:18 Maximiliano HP_LaserJet_P1005?serial=L403C4P: prnt/backend/hp.c 676: INFO: open device failed stat=12; will retry in 30 seconds...

hp-firmware

Using device: hp:/usb/HP_LaserJet_P1005?serial=L403C4P

error: Unable to communicate with device (code=12): hp:/usb/HP_LaserJet_P1005?serial=L403C4P

error:  Unable to communicate with device or device is in an error state.  Please check device setup and try again.


lsusb

maximi89@Maximiliano:~$ lsusb
Bus 002 Device 003: ID 15d9:0a33
Bus 002 Device 004: ID 0d62:001c Darfon Electronics Corp.
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 011: ID 03f0:3d17 Hewlett-Packard
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub



Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         0 Full speed (or root) hub
  bMaxPacketSize0        64
  idVendor           0x1d6b Linux Foundation
  idProduct          0x0001 1.1 root hub
  bcdDevice            2.06
  iManufacturer           3 Linux 2.6.26-1-686 ohci_hcd
  iProduct                2 OHCI Host Controller
  iSerial                 1 0000:00:02.0

  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25

    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA

    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0 Full speed (or root) hub

      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt

          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0002  1x 2 bytes
        bInterval             255
Hub Descriptor:
  bLength              11
  bDescriptorType      41
  nNbrPorts            10
  wHubCharacteristic 0x0002
    No power switching (usb 1.0)
    Ganged overcurrent protection
  bPwrOn2PwrGood        1 * 2 milli seconds
  bHubContrCurrent      0 milli Ampere
  DeviceRemovable    0x00 0x00
  PortPwrCtrlMask    0xff 0xff
 Hub Port Status:
   Port 1: 0000.0100 power
   Port 2: 0000.0100 power
   Port 3: 0000.0100 power
   Port 4: 0000.0100 power
   Port 5: 0000.0100 power
   Port 6: 0000.0100 power
   Port 7: 0000.0303 lowspeed power enable connect
   Port 8: 0000.0100 power
   Port 9: 0000.0303 lowspeed power enable connect
   Port 10: 0000.0100 power
Device Status:     0x0003
  Self Powered
  Remote Wakeup Enabled

Bus 001 Device 011: ID 03f0:3d17 Hewlett-Packard

Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0        64
  idVendor           0x03f0 Hewlett-Packard
  idProduct          0x3d17
  bcdDevice            1.00
  iManufacturer           1 Hewlett-Packard
  iProduct                2 HP LaserJet P1005
  iSerial                 3 L403C4P
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           32
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0xc0
      Self Powered
    MaxPower               98mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass         7 Printer
      bInterfaceSubClass      1 Printer
      bInterfaceProtocol      2 Bidirectional
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x01  EP 1 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
Device Qualifier (for other device speed):
  bLength                10
  bDescriptorType         6
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0        64
  bNumConfigurations      1
Device Status:     0x0001
  Self Powered

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         0 Full speed (or root) hub
  bMaxPacketSize0        64
  idVendor           0x1d6b Linux Foundation
  idProduct          0x0002 2.0 root hub
  bcdDevice            2.06
  iManufacturer           3 Linux 2.6.26-1-686 ehci_hcd
  iProduct                2 EHCI Host Controller
  iSerial                 1 0000:00:02.1

  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25

    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA

    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0 Full speed (or root) hub

      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt

          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0004  1x 4 bytes
        bInterval              12
Hub Descriptor:
  bLength              11
  bDescriptorType      41
  nNbrPorts            10
  wHubCharacteristic 0x000a
    No power switching (usb 1.0)
    Per-port overcurrent protection
  bPwrOn2PwrGood       10 * 2 milli seconds
  bHubContrCurrent      0 milli Ampere
  DeviceRemovable    0x00 0x00
  PortPwrCtrlMask    0xff 0xff
 Hub Port Status:
   Port 1: 0000.0100 power
   Port 2: 0000.0100 power
   Port 3: 0000.0100 power
   Port 4: 0000.0100 power
   Port 5: 0000.0100 power
   Port 6: 0000.0100 power
   Port 7: 0000.0100 power
   Port 8: 0000.0503 highspeed power enable connect
   Port 9: 0000.0100 power
   Port 10: 0000.0100 power
Device Status:     0x0003
  Self Powered
  Remote Wakeup Enabled



NOW
i make a change in /etc/udev/udev.conf from "err" to "debug"... and restart the service...

Apr  6 23:08:35 Maximiliano kernel: [27803.632117] usb 1-8: new high speed USB device using ehci_hcd and address 6
Apr  6 23:08:35 Maximiliano kernel: [27803.784817] usb 1-8: configuration #1 chosen from 1 choice
Apr  6 23:08:35 Maximiliano kernel: [27803.785132] usb 1-8: New USB device found, idVendor=03f0, idProduct=3d17
Apr  6 23:08:35 Maximiliano kernel: [27803.785135] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Apr  6 23:08:35 Maximiliano kernel: [27803.785138] usb 1-8: Product: HP LaserJet P1005
Apr  6 23:08:35 Maximiliano kernel: [27803.785140] usb 1-8: Manufacturer: Hewlett-Packard
Apr  6 23:08:35 Maximiliano kernel: [27803.785143] usb 1-8: SerialNumber: L403C4P
Apr  6 23:13:15 Maximiliano cupsd[12340]: *** WARNING *** The program 'cupsd' uses the Apple Bonjour compatibility layer of Avahi.
Apr  6 23:13:15 Maximiliano cupsd[12340]: *** WARNING *** Please fix your application to use the native API of Avahi!
Apr  6 23:13:15 Maximiliano cupsd[12340]: *** WARNING *** For more information see <http://0pointer.de/avahi-compat?s=libdns_sd&e=cupsd>
Apr  6 23:17:11 Maximiliano cupsd[1446]: *** WARNING *** The program 'cupsd' uses the Apple Bonjour compatibility layer of Avahi.
Apr  6 23:17:11 Maximiliano cupsd[1446]: *** WARNING *** Please fix your application to use the native API of Avahi!
Apr  6 23:17:11 Maximiliano cupsd[1446]: *** WARNING *** For more information see <http://0pointer.de/avahi-compat?s=libdns_sd&e=cupsd>
Apr  6 23:26:16 Maximiliano python: hp-toolbox(UI)[1771]: warning: Supplies information not available for this device.
Apr  6 23:37:18 Maximiliano kernel: [29526.649492] udevd version 125 started



the error now is 5012...
--
Maximiliano Augusto Castañón Araneda
Santiago, Chile
Linux user # 394821



--
Maximiliano Augusto Castañón Araneda
Santiago, Chile
Linux user # 394821



--
Maximiliano Augusto Castañón Araneda
Santiago, Chile
Linux user # 394821



--
Maximiliano Augusto Castañón Araneda
Santiago, Chile
Linux user # 394821
Reply to: