Bug#524876: sata_mv: frozen/hard reset on 4-port 5041 chip
Package: linux-image-2.6.26-2-686
Version: 2.6.26-15
Severity: important
After upgrading a SuperMicro SuperServer 5013-MT server from etch to lenny I started getting numerous hard resets on all of the sata ports. The 4-port sata controller is a Marvell MV88SX5041. Looking around a bit it seems that the error reported is a timeout error. A very similar bug was filed under number 514155 for the 508x/6081 8-port controller chips.
I am using LVM2 on MD raid 1 and raid 5. Disabling write caching significantly reduced the number of resets; but didn't eliminate them.
I'm using all four ports. Two of each of the following drives:
# smartctl -a /dev/sda
smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Caviar SE Serial ATA family
Device Model: WDC WD1600JD-00HBB0
Serial Number: WD-WMAL93632635
Firmware Version: 08.02D08
User Capacity: 160,041,885,696 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 6
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Mon Apr 20 08:46:53 2009 CDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
# smartctl -a /dev/sdc
smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Caviar Second Generation Serial ATA family
Device Model: WDC WD1600JS-00MHB0
Serial Number: WD-WCANM5801449
Firmware Version: 02.01C03
User Capacity: 160,041,885,696 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 7
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Mon Apr 20 08:48:15 2009 CDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
-- Package-specific info:
** Version:
Linux version 2.6.26-2-686 (Debian 2.6.26-15) (dannf@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Thu Mar 26 01:08:11 UTC 2009
** Command line:
root=/dev/mapper/vg00-lvol00 ro
** Not tainted
** Kernel log:
[455303.419050] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[455303.439051] ata2.00: configured for UDMA/133
[455303.439051] ata2: EH complete
[455303.439051] sd 1:0:0:0: [sdb] 312581808 512-byte hardware sectors (160042 MB)
[455303.439051] sd 1:0:0:0: [sdb] Write Protect is off
[455303.439051] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[455303.439051] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[458708.100929] kjournald starting. Commit interval 5 seconds
[458708.116094] EXT3 FS on dm-3, internal journal
[458708.135538] ext3_orphan_cleanup: deleting unreferenced inode 294977
[458708.135538] EXT3-fs: dm-3: 1 orphan inode deleted
[458708.135538] EXT3-fs: recovery complete.
[458708.241394] EXT3-fs: mounted filesystem with ordered data mode.
[458866.006763] kjournald starting. Commit interval 5 seconds
[458866.009491] EXT3 FS on dm-3, internal journal
[458866.009519] EXT3-fs: mounted filesystem with ordered data mode.
[478262.658699] kjournald starting. Commit interval 5 seconds
[478262.673607] EXT3 FS on dm-3, internal journal
[478262.686712] ext3_orphan_cleanup: deleting unreferenced inode 294977
[478262.686712] EXT3-fs: dm-3: 1 orphan inode deleted
[478262.686712] EXT3-fs: recovery complete.
[478262.827577] EXT3-fs: mounted filesystem with ordered data mode.
[478410.566612] kjournald starting. Commit interval 5 seconds
[478410.568461] EXT3 FS on dm-3, internal journal
[478410.568491] EXT3-fs: mounted filesystem with ordered data mode.
[577145.938893] kjournald starting. Commit interval 5 seconds
[577145.947570] EXT3 FS on dm-3, internal journal
[577145.960942] ext3_orphan_cleanup: deleting unreferenced inode 294977
[577145.960942] EXT3-fs: dm-3: 1 orphan inode deleted
[577145.960942] EXT3-fs: recovery complete.
[577146.036448] EXT3-fs: mounted filesystem with ordered data mode.
[577365.382913] kjournald starting. Commit interval 5 seconds
[577365.394878] EXT3 FS on dm-3, internal journal
[577365.394906] EXT3-fs: mounted filesystem with ordered data mode.
[593245.683756] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[593245.683793] ata2.00: cmd ca/00:08:9b:d6:3b/00:00:00:00:00/e0 tag 0 dma 4096 out
[593245.683797] res 40/00:00:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout)
[593245.683862] ata2.00: status: { DRDY }
[593245.683893] ata2: hard resetting link
[593246.245194] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[593246.304561] ata2.00: configured for UDMA/133
[593246.304561] ata2: EH complete
[593246.304561] sd 1:0:0:0: [sdb] 312581808 512-byte hardware sectors (160042 MB)
[593246.319992] sd 1:0:0:0: [sdb] Write Protect is off
[593246.319992] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[593246.332563] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[643373.574483] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[643373.574530] ata1.00: cmd c8/00:08:c3:d2:27/00:00:00:00:00/e2 tag 0 dma 4096 in
[643373.574533] res 40/00:00:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout)
[643373.574600] ata1.00: status: { DRDY }
[643373.574628] ata1: hard resetting link
[643374.089995] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[643374.160557] ata1.00: configured for UDMA/133
[643374.160557] ata1: EH complete
[643374.236238] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[643374.264238] sd 0:0:0:0: [sda] Write Protect is off
[643374.264238] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[643374.316393] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[662042.014917] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[662042.014984] ata1.00: cmd ca/00:08:e3:92:82/00:00:00:00:00/e0 tag 0 dma 4096 out
[662042.014987] res 40/00:00:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout)
[662042.015058] ata1.00: status: { DRDY }
[662042.015089] ata1: hard resetting link
[662042.487683] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[662042.588612] ata1.00: configured for UDMA/133
[662042.588612] ata1: EH complete
[662042.588612] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[662042.588612] sd 0:0:0:0: [sda] Write Protect is off
[662042.588612] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[662042.588612] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[663965.139482] kjournald starting. Commit interval 5 seconds
[663965.156359] EXT3 FS on dm-3, internal journal
[663965.193787] ext3_orphan_cleanup: deleting unreferenced inode 294977
[663965.193814] EXT3-fs: dm-3: 1 orphan inode deleted
[663965.193836] EXT3-fs: recovery complete.
[663965.312069] EXT3-fs: mounted filesystem with ordered data mode.
[664090.845743] kjournald starting. Commit interval 5 seconds
[664090.853739] EXT3 FS on dm-3, internal journal
[664090.853739] EXT3-fs: mounted filesystem with ordered data mode.
[701539.052347] kjournald starting. Commit interval 5 seconds
[701539.081501] EXT3 FS on dm-3, internal journal
[701539.108971] ext3_orphan_cleanup: deleting unreferenced inode 294977
[701539.108971] EXT3-fs: dm-3: 1 orphan inode deleted
[701539.108971] EXT3-fs: recovery complete.
[701539.243761] EXT3-fs: mounted filesystem with ordered data mode.
[701678.992019] kjournald starting. Commit interval 5 seconds
[701679.004094] EXT3 FS on dm-3, internal journal
[701679.004124] EXT3-fs: mounted filesystem with ordered data mode.
[702662.709396] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[702662.709444] ata2.00: cmd ca/00:08:03:53:3c/00:00:00:00:00/e0 tag 0 dma 4096 out
[702662.709447] res 40/00:00:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout)
[702662.709518] ata2.00: status: { DRDY }
[702662.709549] ata2: hard resetting link
[702663.221598] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[702663.293557] ata2.00: configured for UDMA/133
[702663.293557] ata2: EH complete
[702663.293557] sd 1:0:0:0: [sdb] 312581808 512-byte hardware sectors (160042 MB)
[702663.346525] sd 1:0:0:0: [sdb] Write Protect is off
[702663.346525] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[702663.353556] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
** Loaded modules:
Module Size Used by
ppdev 6500 0
lp 8164 0
ipv6 235364 33
tcp_diag 1472 0
inet_diag 8392 1 tcp_diag
ide_generic 2464 0 [permanent]
ide_disk 10496 0
snd_pcm 62596 0
snd_timer 17800 1 snd_pcm
snd 45604 2 snd_pcm,snd_timer
soundcore 6368 1 snd
parport_pc 22500 1
snd_page_alloc 7816 1 snd_pcm
psmouse 32336 0
parport 30988 3 ppdev,lp,parport_pc
i2c_i801 7920 0
pcspkr 2432 0
i2c_core 19828 1 i2c_i801
serio_raw 4740 0
intel_rng 4576 0
rng_core 3940 1 intel_rng
button 6096 0
iTCO_wdt 9508 0
intel_agp 22556 1
agpgart 28776 1 intel_agp
shpchp 25528 0
pci_hotplug 23460 1 shpchp
i82875p_edac 4936 0
edac_core 36144 1 i82875p_edac
evdev 8000 0
ext3 105512 4
jbd 39444 1 ext3
mbcache 7108 1 ext3
dm_mirror 15104 0
dm_log 8484 1 dm_mirror
raid1 18016 2
md_mod 67036 3 raid1
ide_cd_mod 27652 0
cdrom 30176 1 ide_cd_mod
ata_piix 14180 0
sd_mod 22200 11
ata_generic 4676 0
piix 6568 0 [permanent]
floppy 47748 0
sata_mv 20876 8
libata 140416 3 ata_piix,ata_generic,sata_mv
ide_pci_generic 3908 0 [permanent]
ide_core 96136 5 ide_generic,ide_disk,ide_cd_mod,piix,ide_pci_generic
scsi_mod 129324 2 sd_mod,libata
dock 8304 1 libata
ehci_hcd 28396 0
e1000 102560 0
uhci_hcd 18672 0
usbcore 118224 3 ehci_hcd,uhci_hcd
thermal 15228 0
processor 32544 1 thermal
fan 4164 0
thermal_sys 10856 3 thermal,processor,fan
dm_snapshot 14340 0
dm_mod 46184 10 dm_mirror,dm_log,dm_snapshot
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82875P/E7210 Memory Controller Hub [8086:2578] (rev 02)
Subsystem: Super Micro Computer Inc Device [15d9:5180]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
Kernel modules: intel-agp, i82875p_edac
00:03.0 PCI bridge [0604]: Intel Corporation 82875P/E7210 Processor to PCI to CSA Bridge [8086:257b] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fa100000-fa1fffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Kernel modules: shpchp
00:06.0 System peripheral [0880]: Intel Corporation 82875P/E7210 Processor to I/O Memory Interface [8086:257e] (rev 02)
Subsystem: Intel Corporation 82875P/E7210 Processor to I/O Memory Interface [8086:257e]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: Memory at fecf0000 (32-bit, non-prefetchable) [size=4K]
00:1c.0 PCI bridge [0604]: Intel Corporation 6300ESB 64-bit PCI-X Bridge [8086:25ae] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=64
Memory behind bridge: fa000000-fa0fffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel modules: shpchp
00:1d.0 USB Controller [0c03]: Intel Corporation 6300ESB USB Universal Host Controller [8086:25a9] (rev 02) (prog-if 00 [UHCI])
Subsystem: Super Micro Computer Inc Device [15d9:5180]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at e100 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 6300ESB USB Universal Host Controller [8086:25aa] (rev 02) (prog-if 00 [UHCI])
Subsystem: Super Micro Computer Inc Device [15d9:5180]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at e000 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.4 System peripheral [0880]: Intel Corporation 6300ESB Watchdog Timer [8086:25ab] (rev 02)
Subsystem: Super Micro Computer Inc Device [15d9:5180]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: Memory at fa201000 (32-bit, non-prefetchable) [size=16]
Kernel modules: i6300esb
00:1d.5 PIC [0800]: Intel Corporation 6300ESB I/O Advanced Programmable Interrupt Controller [8086:25ac] (rev 02) (prog-if 20 [IO(X)-APIC])
Subsystem: Intel Corporation 6300ESB I/O Advanced Programmable Interrupt Controller [8086:25ac]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1d.7 USB Controller [0c03]: Intel Corporation 6300ESB USB2 Enhanced Host Controller [8086:25ad] (rev 02) (prog-if 20 [EHCI])
Subsystem: Super Micro Computer Inc Device [15d9:5180]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 23
Region 0: Memory at fa200000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 0a) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: f8000000-f9ffffff
Prefetchable memory behind bridge: 40000000-400fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Kernel modules: shpchp
00:1f.0 ISA bridge [0601]: Intel Corporation 6300ESB LPC Interface Controller [8086:25a1] (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Kernel modules: intel-rng, iTCO_wdt
00:1f.1 IDE interface [0101]: Intel Corporation 6300ESB PATA Storage Controller [8086:25a2] (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: Super Micro Computer Inc Device [15d9:5180]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at f000 [size=16]
Region 5: Memory at 40100000 (32-bit, non-prefetchable) [size=1K]
Kernel driver in use: PIIX_IDE
Kernel modules: piix
00:1f.2 IDE interface [0101]: Intel Corporation 6300ESB SATA Storage Controller [8086:25a3] (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Super Micro Computer Inc Device [15d9:5180]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at e200 [size=8]
Region 1: I/O ports at e300 [size=4]
Region 2: I/O ports at e400 [size=8]
Region 3: I/O ports at e500 [size=4]
Region 4: I/O ports at e600 [size=16]
Kernel driver in use: ata_piix
Kernel modules: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 6300ESB SMBus Controller [8086:25a4] (rev 02)
Subsystem: Super Micro Computer Inc Device [15d9:5180]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at 0500 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801
01:01.0 Ethernet controller [0200]: Intel Corporation 82547GI Gigabit Ethernet Controller [8086:1075]
Subsystem: Intel Corporation PRO/1000 CT Network Connection [8086:1075]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 0 (63750ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fa100000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at c000 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000
Kernel modules: e1000
02:04.0 RAID bus controller [0104]: Marvell Technology Group Ltd. MV88SX5041 4-port SATA I PCI-X Controller [11ab:5041]
Subsystem: Super Micro Computer Inc Device [15d9:5180]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 128 bytes
Interrupt: pin A routed to IRQ 27
Region 0: Memory at fa000000 (64-bit, non-prefetchable) [size=512K]
Capabilities: <access denied>
Kernel driver in use: sata_mv
Kernel modules: sata_mv
03:09.0 VGA compatible controller [0300]: ATI Technologies Inc Rage XL [1002:4752] (rev 27) (prog-if 00 [VGA controller])
Subsystem: Super Micro Computer Inc Device [15d9:5180]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (2000ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 9
Region 0: Memory at f8000000 (32-bit, non-prefetchable) [size=16M]
Region 1: I/O ports at d000 [size=256]
Region 2: Memory at f9040000 (32-bit, non-prefetchable) [size=4K]
[virtual] Expansion ROM at 40000000 [disabled] [size=128K]
Capabilities: <access denied>
03:0a.0 Ethernet controller [0200]: Intel Corporation 82541GI Gigabit Ethernet Controller [8086:1076]
Subsystem: Intel Corporation PRO/1000 MT Network Connection [8086:1076]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (63750ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at f9000000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at d100 [size=64]
Capabilities: <access denied>
Kernel driver in use: e1000
Kernel modules: e1000
-- System Information:
Debian Release: 5.0.1
APT prefers stable
APT policy: (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 2.6.26-2-686 (SMP w/2 CPU cores)
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.26-2-686 depends on:
ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92o tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.26-2-686 recommends:
ii libc6-i686 2.7-18 GNU C Library: Shared libraries [i
Versions of packages linux-image-2.6.26-2-686 suggests:
ii grub 0.97-47lenny2 GRand Unified Bootloader (Legacy v
pn linux-doc-2.6.26 <none> (no description available)
-- debconf information:
linux-image-2.6.26-2-686/postinst/bootloader-error-2.6.26-2-686:
linux-image-2.6.26-2-686/postinst/bootloader-test-error-2.6.26-2-686:
linux-image-2.6.26-2-686/postinst/depmod-error-2.6.26-2-686: false
linux-image-2.6.26-2-686/preinst/bootloader-initrd-2.6.26-2-686: true
linux-image-2.6.26-2-686/postinst/create-kimage-link-2.6.26-2-686: true
linux-image-2.6.26-2-686/preinst/initrd-2.6.26-2-686:
linux-image-2.6.26-2-686/postinst/kimage-is-a-directory:
linux-image-2.6.26-2-686/postinst/old-initrd-link-2.6.26-2-686: true
linux-image-2.6.26-2-686/prerm/removing-running-kernel-2.6.26-2-686: true
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.26-2-686/postinst/old-dir-initrd-link-2.6.26-2-686: true
linux-image-2.6.26-2-686/preinst/overwriting-modules-2.6.26-2-686: true
linux-image-2.6.26-2-686/preinst/abort-overwrite-2.6.26-2-686:
linux-image-2.6.26-2-686/preinst/abort-install-2.6.26-2-686:
linux-image-2.6.26-2-686/postinst/depmod-error-initrd-2.6.26-2-686: false
linux-image-2.6.26-2-686/preinst/failed-to-move-modules-2.6.26-2-686:
linux-image-2.6.26-2-686/preinst/lilo-has-ramdisk:
linux-image-2.6.26-2-686/prerm/would-invalidate-boot-loader-2.6.26-2-686: true
linux-image-2.6.26-2-686/preinst/elilo-initrd-2.6.26-2-686: true
linux-image-2.6.26-2-686/preinst/lilo-initrd-2.6.26-2-686: true
linux-image-2.6.26-2-686/postinst/old-system-map-link-2.6.26-2-686: true
Reply to: