[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#410817: marked as done (linux-image-2.6.18-3-686: new megaraid driver fails to detect logical drive)

Your message dated Tue, 24 Mar 2009 03:35:57 +0100
with message-id <20090324023557.GC7261@stro.at>
and subject line linux-image-2.6.18-3-686: new megaraid driver fails to detect logical drive
has caused the Debian Bug report #410817,
regarding linux-image-2.6.18-3-686: new megaraid driver fails to detect logical drive
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
410817: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=410817
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message --- 
Package: linux-image-2.6.18-3-686
Version: 2.6.18-7
Severity: critical
Justification: breaks the whole system

This is the relevant portion of dmesg from the sarge kernel:

Feb 11 06:52:03 clap kernel: Linux version 2.6.8-3-686-smp (pbuilder@dl360-g3) (
gcc version 3.3.5 (Debian 1:3.3.5-13)) #1 SMP Tue Dec 5 23:17:50 UTC 2006
Feb 11 06:52:03 clap kernel: SCSI subsystem initialized
Feb 11 06:52:03 clap kernel: ACPI: PCI interrupt 0000:01:02.0[A] -> GSI 17 (leve
l, low) -> IRQ 193
Feb 11 06:52:03 clap kernel: megaraid: found 0x101e:0x1960:bus 1:slot 2:func 0
Feb 11 06:52:03 clap kernel: scsi0:Found MegaRAID controller at 0xf8829000, IRQ:
193
Feb 11 06:52:03 clap kernel: megaraid: [6.62:1.03] detected 1 logical drives.
Feb 11 06:52:03 clap kernel: megaraid: supports extended CDBs.
Feb 11 06:52:03 clap kernel: megaraid: channel[0] is raid.
Feb 11 06:52:03 clap kernel: megaraid: channel[1] is raid.
Feb 11 06:52:03 clap kernel: megaraid: channel[2] is raid.
Feb 11 06:52:03 clap kernel: megaraid: channel[3] is raid.
Feb 11 06:52:03 clap kernel: scsi0 : LSI Logic MegaRAID 6.62 254 commands 16 tar
gs 7 chans 7 luns
Feb 11 06:52:03 clap kernel: scsi0: scanning scsi channel 0 for logical drives.
Feb 11 06:52:03 clap kernel:   Vendor: MegaRAID  Model: LD 0 RAID1  228G  Rev: 6
.62
Feb 11 06:52:03 clap kernel:   Type:   Direct-Access                      ANSI S
CSI revision: 02
Feb 11 06:52:03 clap kernel: SCSI device sda: 468697088 512-byte hdwr sectors (2
39973 MB)
Feb 11 06:52:03 clap kernel: sda: asking for cache data failed
Feb 11 06:52:03 clap kernel: sda: assuming drive cache: write through
Feb 11 06:52:03 clap kernel:  /dev/scsi/host0/bus0/target0/lun0: p1
Feb 11 06:52:03 clap kernel: Attached scsi disk sda at scsi0, channel 0, id 0, l
un 0
Feb 11 06:52:03 clap kernel: scsi0: scanning scsi channel 1 for logical drives.
Feb 11 06:52:03 clap kernel: scsi0: scanning scsi channel 2 for logical drives.
Feb 11 06:52:03 clap kernel: scsi0: scanning scsi channel 4 [P0] for physical de
vices.
Feb 11 06:52:03 clap kernel: scsi0: scanning scsi channel 5 [P1] for physical de
vices.
Feb 11 06:52:03 clap kernel: scsi0: scanning scsi channel 6 [P2] for physical de
vices.
Feb 11 06:52:03 clap kernel: scsi0: scanning scsi channel 7 [P3] for physical de
vices.

And this is from the etch kernel:
Feb 11 00:35:24 clap kernel: megaraid: 2.20.4.9 (Release Date: Sun Jul 16 12:27:
22 EST 2006)
Feb 11 00:35:24 clap kernel: megaraid: probe new device 0x101e:0x1960:0x1028:0x0
511: bus 1:slot 2:func 0
Feb 11 00:35:24 clap kernel: ACPI: PCI Interrupt 0000:01:02.0[A] -> GSI 17 (leve
l, low) -> IRQ 177
Feb 11 00:35:24 clap kernel: megaraid: fw version:[6.62] bios version:[1.03]
Feb 11 00:35:24 clap kernel: scsi0 : LSI Logic MegaRAID driver
Feb 11 00:35:24 clap kernel: scsi[0]: scanning scsi channel 0 [Phy 0] for non-ra
id devices
Feb 11 00:35:24 clap kernel: scsi[0]: scanning scsi channel 1 [Phy 1] for non-ra
id devices
Feb 11 00:35:24 clap kernel: e1000: 0000:00:02.0: e1000_probe: (PCI:33MHz:32-bit
) 00:c0:9f:29:68:31
Feb 11 00:35:24 clap kernel: scsi[0]: scanning scsi channel 2 [Phy 2] for non-ra
id devices
Feb 11 00:35:24 clap kernel: e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network
 Connection
Feb 11 00:35:24 clap kernel: ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 25 (leve
l, low) -> IRQ 193
Feb 11 00:35:24 clap kernel: scsi[0]: scanning scsi channel 3 [Phy 3] for non-ra
id devices
Feb 11 00:35:24 clap kernel: scsi[0]: scanning scsi channel 4 [virtual] for logi
cal drives

I have stuck an  IDE boot drive in the machine (it is in a hosting center
and I don't have any other similarly broken machines), so I can now reboot 
it remotely for experimental purposes if required, and am happy to collect
any information required.

-- System Information:
Debian Release: 4.0
  APT prefers testing
  APT policy: (500, 'testing')
Architecture: i386 (i686)
Shell:  /bin/sh linked to /bin/bash
Kernel: Linux 2.6.8-3-686-smp
Locale: LANG=en_GB, LC_CTYPE=en_GB (charmap=ISO-8859-1)

Versions of packages linux-image-2.6.18-3-686 depends on:
ii  coreutils                     5.97-5     The GNU core utilities
ii  debconf [debconf-2.0]         1.5.11     Debian configuration management sy
ii  initramfs-tools [linux-initra 0.85e      tools for generating an initramfs
ii  module-init-tools             3.3-pre3-1 tools for managing Linux kernel mo

Versions of packages linux-image-2.6.18-3-686 recommends:
pn  libc6-i686                    <none>     (no description available)

-- debconf information:
  shared/kernel-image/really-run-bootloader: true
  linux-image-2.6.18-3-686/postinst/bootloader-error-2.6.18-3-686:
  linux-image-2.6.18-3-686/postinst/old-dir-initrd-link-2.6.18-3-686: true
  linux-image-2.6.18-3-686/postinst/kimage-is-a-directory:
  linux-image-2.6.18-3-686/preinst/elilo-initrd-2.6.18-3-686: true
  linux-image-2.6.18-3-686/postinst/old-system-map-link-2.6.18-3-686: true
  linux-image-2.6.18-3-686/preinst/lilo-initrd-2.6.18-3-686: true
  linux-image-2.6.18-3-686/postinst/depmod-error-initrd-2.6.18-3-686: false
  linux-image-2.6.18-3-686/preinst/bootloader-initrd-2.6.18-3-686: true
  linux-image-2.6.18-3-686/prerm/removing-running-kernel-2.6.18-3-686: true
  linux-image-2.6.18-3-686/postinst/create-kimage-link-2.6.18-3-686: true
  linux-image-2.6.18-3-686/prerm/would-invalidate-boot-loader-2.6.18-3-686: true
  linux-image-2.6.18-3-686/preinst/abort-install-2.6.18-3-686:
  linux-image-2.6.18-3-686/preinst/overwriting-modules-2.6.18-3-686: true
  linux-image-2.6.18-3-686/preinst/initrd-2.6.18-3-686:
  linux-image-2.6.18-3-686/preinst/lilo-has-ramdisk:
  linux-image-2.6.18-3-686/preinst/already-running-this-2.6.18-3-686:
  linux-image-2.6.18-3-686/postinst/bootloader-test-error-2.6.18-3-686:
  linux-image-2.6.18-3-686/preinst/abort-overwrite-2.6.18-3-686:
  linux-image-2.6.18-3-686/postinst/old-initrd-link-2.6.18-3-686: true
  linux-image-2.6.18-3-686/postinst/depmod-error-2.6.18-3-686: false
  linux-image-2.6.18-3-686/preinst/failed-to-move-modules-2.6.18-3-686:

--- End Message ---
--- Begin Message --- 
Version: 2.6.26-1

according to upstream bug report this has been dealt with for 2.6.26.
thus closing.

-- 
maks

--- End Message ---
Reply to: