Bug#517995: [linux-image-2.6.28-1-686] Intel sound dont work
Package: linux-image-2.6.28-1-686
Version: 2.6.28-1
Severity: normal
--- Please enter the report below this line. ---
Hi,
I have this sound card:
0:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio
Controller (rev 03)
Subsystem: Dell Device 0233
Flags: bus master, fast devsel, latency 0, IRQ 21
Memory at f6adc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
Using the kernel 2.6.26 the sound work, but using the 2.6.28 the sound dont
work, but no errors are showed. The modules are the same, look:
[ronaldo@mobilix ~]$ uname -a
Linux mobilix 2.6.26-1-686 #1 SMP Sat Jan 10 18:29:31 UTC 2009 i686 GNU/Linux
[ronaldo@mobilix ~]$ lsmod | grep snd
snd_hda_intel 324248 1
snd_pcm_oss 32800 0
snd_mixer_oss 12320 1 snd_pcm_oss
snd_pcm 62596 2 snd_hda_intel,snd_pcm_oss
snd_seq_dummy 2660 0
snd_seq_oss 24992 0
snd_seq_midi 5728 0
snd_rawmidi 18496 1 snd_seq_midi
snd_seq_midi_event 6432 2 snd_seq_oss,snd_seq_midi
snd_seq 41456 6
snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer 17800 2 snd_pcm,snd_seq
snd_seq_device 6380 5
snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
snd 45604 11
snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore 6368 1 snd
snd_page_alloc 7816 2 snd_hda_intel,snd_pcm
Now with the 2.6.28
[ronaldo@mobilix ~]$ uname -a
Linux mobilix 2.6.28-1-686 #1 SMP Mon Feb 23 03:13:24 UTC 2009 i686 GNU/Linux
[ronaldo@mobilix ~]$ lsmod | grep snd
snd_hda_intel 362712 1
snd_pcm_oss 32128 0
snd_mixer_oss 12256 1 snd_pcm_oss
snd_pcm 63332 2 snd_hda_intel,snd_pcm_oss
snd_seq_dummy 2628 0
snd_seq_oss 24636 0
snd_seq_midi 5760 0
snd_rawmidi 18784 1 snd_seq_midi
snd_seq_midi_event 6368 2 snd_seq_oss,snd_seq_midi
snd_seq 41576 6
snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer 17992 2 snd_pcm,snd_seq
snd_seq_device 6412 5
snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
snd 45912 11
snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore 6440 1 snd
snd_page_alloc 8200 2 snd_hda_intel,snd_pcm
Thanks
Ronaldo
--- System information. ---
Architecture: i386
Kernel: Linux 2.6.28-1-686
Debian Release: 5.0
500 unstable 200.97.11.11
500 testing 200.97.11.11
500 stable 200.97.11.11
--- Package information. ---
Depends (Version) | Installed
=====================================-+-=============
module-init-tools | 3.4-1
initramfs-tools (>= 0.55) | 0.92o
OR yaird (>= 0.0.13) |
OR linux-initramfs-tool |
-8<---8<---8<---8<---8<---8<---8<---8<---8<--
Please attach the file:
/tmp/reportbug-ng-linux-image-2.6.28-1-686-ABZuGW.txt
to the mail. I'd do it myself if the output wasn't too long to handle.
Thank you!
->8--->8--->8--->8--->8--->8--->8--->8--->8--
--
This door is baroquen, please wiggle Handel.
(If I wiggle Handel, will it wiggle Bach?)
-- Found on a door in the MSU music building
--
> Prof. Ronaldo Reis Júnior
| .''`. UNIMONTES/DBG/Lab. Ecologia Comportamental e Computacional
| : :' : Campus Universitário Prof. Darcy Ribeiro, Vila Mauricéia
| `. `'` CP: 126, CEP: 39401-089, Montes Claros - MG - Brasil
| `- Fone: (38) 3229-8192 | ronaldo.reis@unimontes.br | chrysopa@gmail.com
| http://www.ppgcb.unimontes.br/lecc | ICQ#: 5692561 | LinuxUser#: 205366
--
Favor NÃO ENVIAR arquivos do Word ou Powerpoint
Prefira enviar em PDF, Texto, OpenOffice (ODF), HTML, or RTF.
--- Output from package bug script ---
** Version:
Linux version 2.6.28-1-686 (Debian 2.6.28-1) (maks@debian.org) (gcc version 4.3.3 (Debian 4.3.3-4) ) #1 SMP Mon Feb 23 03:13:24 UTC 2009
** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.28-1-686 root=UUID=5b22c492-b134-48a0-851d-61fb20d01452 ro vga=792 splash GRUB_CMDLINE_LINUX= quiet
** Tainted: P (1)
** Kernel log:
[ 5.150872] usb 1-1.1: new full speed USB device using uhci_hcd and address 3
[ 5.183428] kjournald starting. Commit interval 5 seconds
[ 5.183460] EXT3-fs: mounted filesystem with ordered data mode.
[ 5.268960] usb 1-1.1: configuration #1 chosen from 1 choice
[ 5.275105] input: HID 413c:8157 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input4
[ 5.275149] generic-usb 0003:413C:8157.0004: input,hidraw3: USB HID v1.11 Keyboard [HID 413c:8157] on usb-0000:00:1a.0-1.1/input0
[ 5.275234] usb 1-1.1: New USB device found, idVendor=413c, idProduct=8157
[ 5.275236] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 5.349868] usb 1-1.2: new full speed USB device using uhci_hcd and address 4
[ 5.471917] usb 1-1.2: configuration #1 chosen from 1 choice
[ 5.479150] input: HID 413c:8158 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input5
[ 5.479905] generic-usb 0003:413C:8158.0005: input,hidraw4: USB HID v1.11 Mouse [HID 413c:8158] on usb-0000:00:1a.0-1.2/input0
[ 5.479981] usb 1-1.2: New USB device found, idVendor=413c, idProduct=8158
[ 5.479984] usb 1-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 7.164996] udevd version 125 started
[ 7.349964] Linux agpgart interface v0.103
[ 7.352049] agpgart-intel 0000:00:00.0: Intel Mobile Intel�� GM45 Express Chipset
[ 7.353001] agpgart-intel 0000:00:00.0: detected 32764K stolen memory
[ 7.356055] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[ 7.360496] ACPI: AC Adapter [AC] (on-line)
[ 7.475690] ACPI: Battery Slot [BAT0] (battery present)
[ 7.475829] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input6
[ 7.477661] ACPI: Lid Switch [LID]
[ 7.477713] ACPI: Battery Slot [BAT1] (battery absent)
[ 7.477830] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input7
[ 7.488015] ACPI: Power Button (CM) [PBTN]
[ 7.488059] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input8
[ 7.504016] ACPI: Sleep Button (CM) [SBTN]
[ 7.520425] ACPI: WMI: Mapper loaded
[ 7.835525] acpi device:3e: registered as cooling_device2
[ 7.836244] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:3c/input/input9
[ 7.859942] ACPI: Video Device [VID1] (multi-head: yes rom: no post: no)
[ 7.860040] ACPI Warning (nspredef-0357): \_SB_.PCI0.VID2._DOD: Return Package has no elements (empty) [20080926]
[ 7.860124] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:43/input/input10
[ 7.876065] ACPI: Video Device [VID2] (multi-head: yes rom: no post: no)
[ 8.280173] Linux video capture interface: v2.00
[ 8.335569] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_0.3M (0c45:63f8)
[ 8.348989] input: Laptop_Integrated_Webcam_0.3M as /devices/pci0000:00/0000:00:1a.7/usb2/2-6/2-6:1.0/input/input11
[ 8.369078] usbcore: registered new interface driver uvcvideo
[ 8.369081] USB Video Class driver (v0.1.0)
[ 8.521241] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.04
[ 8.521370] iTCO_wdt: Found a ICH9M-E TCO device (Version=2, TCOBASE=0x1060)
[ 8.521430] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 8.778262] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 8.778306] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 8.816686] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input12
[ 8.840762] input: PC Speaker as /devices/platform/pcspkr/input/input13
[ 8.885516] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 8.924610] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 9.624333] input: DualPoint Stick as /devices/platform/i8042/serio1/input/input14
[ 9.660601] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input15
[ 11.299581] Adding 1951888k swap on /dev/sda3. Priority:-1 extents:1 across:1951888k
[ 11.715187] EXT3 FS on sda2, internal journal
[ 12.341803] loop: module loaded
[ 12.362525] ieee80211_crypt: registered algorithm 'NULL'
[ 12.363516] ieee80211_crypt: registered algorithm 'TKIP'
[ 12.437191] wl: module license 'unspecified' taints kernel.
[ 12.438834] wl 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 12.438847] wl 0000:0c:00.0: setting latency timer to 64
[ 12.455475] eth1: Broadcom BCM4315 802.11 Wireless Controller 5.10.27.14
[ 12.987188] fuse init (API version 7.10)
[ 13.047972] kjournald starting. Commit interval 5 seconds
[ 13.048338] EXT3 FS on sda4, internal journal
[ 13.048343] EXT3-fs: mounted filesystem with ordered data mode.
[ 16.139960] NET: Registered protocol family 10
[ 16.140384] lo: Disabled Privacy Extensions
[ 16.978587] lp: driver loaded but no devices found
[ 16.999904] ppdev: user-space parallel port driver
[ 21.491431] Bluetooth: Core ver 2.13
[ 21.492259] NET: Registered protocol family 31
[ 21.492261] Bluetooth: HCI device and connection manager initialized
[ 21.492263] Bluetooth: HCI socket layer initialized
[ 21.500777] Bluetooth: L2CAP ver 2.11
[ 21.500779] Bluetooth: L2CAP socket layer initialized
[ 21.538390] Bluetooth: RFCOMM socket layer initialized
[ 21.538397] Bluetooth: RFCOMM TTY layer initialized
[ 21.538398] Bluetooth: RFCOMM ver 1.10
[ 21.647783] usb 1-1.2: usbfs: process 3355 (hid2hci) did not claim interface 0 before use
[ 21.934856] usb 1-1.3: new full speed USB device using uhci_hcd and address 5
[ 22.008537] e1000e 0000:00:19.0: irq 507 for MSI/MSI-X
[ 22.063970] usb 1-1.3: configuration #1 chosen from 1 choice
[ 22.064080] e1000e 0000:00:19.0: irq 507 for MSI/MSI-X
[ 22.064347] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 22.067188] usb 1-1.3: New USB device found, idVendor=413c, idProduct=8156
[ 22.067190] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 22.067192] usb 1-1.3: Product: Dell Wireless 370 Bluetooth Mini-card
[ 22.067194] usb 1-1.3: Manufacturer: Dell Computer Corp
[ 22.282407] Bluetooth: Generic Bluetooth USB driver ver 0.3
[ 22.282488] usbcore: registered new interface driver btusb
[ 27.505336] [drm] Initialized drm 1.1.0 20060810
[ 27.533882] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 27.533886] pci 0000:00:02.0: setting latency timer to 64
[ 27.534088] pci 0000:00:02.0: irq 505 for MSI/MSI-X
[ 27.534165] [drm] Initialized i915 1.6.0 20080730 on minor 0
[ 27.545531] mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining
[ 28.572657] set status page addr 0x01fff000
[ 90.088171] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 112.253045] eth1: no IPv6 routers present
[ 171.757031] CE: hpet increasing min_delta_ns to 15000 nsec
[ 622.133271] CE: hpet increasing min_delta_ns to 22500 nsec
** Loaded modules:
Module Size Used by
michael_mic 2304 2
arc4 1824 2
ecb 2624 2
i915 48900 2
drm 76456 3 i915
btusb 10264 2
rfcomm 31024 2
l2cap 18336 9 rfcomm
bluetooth 47808 7 btusb,rfcomm,l2cap
ppdev 6500 0
parport_pc 22388 0
lp 8140 0
parport 30964 3 ppdev,parport_pc,lp
ipv6 231536 18
fuse 44860 1
coretemp 5440 0
wl 1066468 0
ieee80211_crypt_tkip 8032 0
ieee80211_crypt 5124 2 wl,ieee80211_crypt_tkip
loop 13036 0
firewire_sbp2 12556 0
joydev 8832 0
psmouse 36752 0
dcdbas 6752 0
serio_raw 4836 0
i2c_i801 8176 0
pcspkr 2368 0
snd_hda_intel 362712 1
i2c_core 20948 1 i2c_i801
iTCO_wdt 10148 0
snd_pcm_oss 32128 0
snd_mixer_oss 12256 1 snd_pcm_oss
snd_pcm 63332 2 snd_hda_intel,snd_pcm_oss
snd_seq_dummy 2628 0
uvcvideo 46824 0
snd_seq_oss 24636 0
compat_ioctl32 1312 1 uvcvideo
snd_seq_midi 5760 0
videodev 28896 1 uvcvideo
snd_rawmidi 18784 1 snd_seq_midi
v4l1_compat 11428 2 uvcvideo,videodev
snd_seq_midi_event 6368 2 snd_seq_oss,snd_seq_midi
snd_seq 41576 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
evdev 8356 13
snd_timer 17992 2 snd_pcm,snd_seq
snd_seq_device 6412 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
snd 45912 11 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore 6440 1 snd
snd_page_alloc 8200 2 snd_hda_intel,snd_pcm
video 16848 0
output 2784 1 video
wmi 6600 0
button 6032 0
battery 10116 0
ac 4164 0
intel_agp 22812 1
agpgart 30740 3 drm,intel_agp
ext3 105704 2
jbd 41492 1 ext3
mbcache 7396 1 ext3
usbhid 28532 0
hid 34668 1 usbhid
sg 24500 0
sd_mod 27960 4
crc_t10dif 1888 1 sd_mod
sr_mod 13128 0
cdrom 29912 1 sr_mod
ricoh_mmc 3616 0
sdhci_pci 6592 0
sdhci 13860 1 sdhci_pci
mmc_core 43036 1 sdhci
firewire_ohci 19908 0
firewire_core 32768 2 firewire_sbp2,firewire_ohci
crc_itu_t 2080 1 firewire_core
ahci 26572 3
libata 148108 1 ahci
scsi_mod 135628 5 firewire_sbp2,sg,sd_mod,sr_mod,libata
ehci_hcd 30188 0
uhci_hcd 19632 0
usbcore 122204 6 btusb,uvcvideo,usbhid,ehci_hcd,uhci_hcd
e1000e 97552 0
thermal 15292 0
processor 40044 3 thermal
fan 4388 0
thermal_sys 10536 4 video,thermal,processor,fan
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub [8086:2a40] (rev 07)
Subsystem: Dell Device [1028:0233]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
Kernel modules: intel-agp
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a42] (rev 07) (prog-if 00 [VGA controller])
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 505
Region 0: Memory at f6c00000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at ef98 [size=8]
Capabilities: <access denied>
00:02.1 Display controller [0380]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a43] (rev 07)
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at f6b00000 (64-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>
00:19.0 Ethernet controller [0200]: Intel Corporation 82567LM Gigabit Network Connection [8086:10f5] (rev 03)
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 507
Region 0: Memory at f6ae0000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at f6adb000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at efe0 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
Kernel modules: e1000e
00:1a.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at 6f60 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 6f80 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 4: I/O ports at 6fa0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 03) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:0233]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 0: Memory at fed1c400 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 03)
Subsystem: Dell Device [1028:0233]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 21
Region 0: Memory at f6adc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.1 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 [8086:2942] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0c, subordinate=0c, sec-latency=0
Memory behind bridge: f6900000-f69fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.2 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 [8086:2944] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0d, subordinate=0d, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.3 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 [8086:2946] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0e, subordinate=0f, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: f6600000-f68fffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f01fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1d.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at 6f00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 6f20 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 4: I/O ports at 6f40 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 03) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:0233]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 0: Memory at fed1c000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 93) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
Memory behind bridge: f6500000-f65fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation ICH9M-E LPC Interface Controller [8086:2917] (rev 03)
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel modules: iTCO_wdt
00:1f.2 RAID bus controller [0104]: Intel Corporation Mobile 82801 SATA RAID Controller [8086:282a] (rev 03)
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 506
Region 0: I/O ports at 6e70 [size=8]
Region 1: I/O ports at 6e78 [size=4]
Region 2: I/O ports at 6e80 [size=8]
Region 3: I/O ports at 6e88 [size=4]
Region 4: I/O ports at 6ea0 [size=32]
Region 5: Memory at fed1c800 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 03)
Subsystem: Dell Device [1028:0233]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 19
Region 0: Memory at f6adaf00 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 1100 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801
03:01.0 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 Controller [1180:0832] (rev 04) (prog-if 10 [OHCI])
Subsystem: Dell Device [1028:0233]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 1000ns max), Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at f65ff800 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
Kernel modules: firewire-ohci
03:01.1 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 21) (prog-if 01)
Subsystem: Dell Device [1028:0233]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f65ff600 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
Kernel modules: sdhci-pci
03:01.2 System peripheral [0880]: Ricoh Co Ltd R5C843 MMC Host Controller [1180:0843] (rev 11)
Subsystem: Dell Device [1028:0233]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 11
Region 0: Memory at f65ff700 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ricoh-mmc
Kernel modules: ricoh_mmc
0c:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g [14e4:4315] (rev 01)
Subsystem: Dell Wireless 1397 WLAN Mini-Card [1028:000c]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at f69fc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: wl
Kernel modules: wl
Reply to: