[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#357538: marked as done (initramfs-tools: can't boot into new 2.6.15 evms system)



Your message dated Sun, 15 Feb 2009 21:53:59 +0100
with message-id <20090215205359.GB24912@stro.at>
and subject line Re: initramfs-tools: can't boot into new 2.6.15 evms system
has caused the Debian Bug report #357538,
regarding initramfs-tools: can't boot into new 2.6.15 evms system
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
357538: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=357538
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message ---
Package: initramfs-tools
Version: 0.55b
Severity: normal


I am running a mostly testing system under a 2.4.27 kernel.  I built a
2.6.15 kernel with the latest sources (2.6.15-8).  kernel-package
10.036.  lilo 22.6.1-7 and installed it with the latest unstable
initramfs-tools (0.55b).

When I boot the system I end up in busybox with no disk partitions
mounted.  When I try to mount my root partition on a mount point, I
get "cramfs wrong magic."

I'm using evms, and I suspect it's involved in these problems.  I use
lvm through it, but have no lvm packages installed.

Here is a rough transcription of the console toward the end:
------------------------------------------------
Begin: Mounting root file system.
Begin: Running /scripts/local-top
device-mapper: 4.4.0-ioctl (2005-01-12) initialised
/scripts/local-top/lvm: 36 vgchange: not found
# bug 354708 involv3s an error with that file
# and notes it's not there because a current lvm is not
# installed.  I have neither an old nor a new one.
Done.
/init: 1: cannot open /dev/root: No such device or address
Begin: Running /scripts/local-premount
Done:
Usage: modprobe # several lines of instructions
# suggests something is invoking modprobe improperly
,pimt"
Cannot read /etc/fstab: No such file or dir
Done
Running /scripts/log-bottom
Running /scripts/init-bottom
mount: /root/dev on /dev/.static/dev failed
mount: Mounting /sys on /root/sys failed: no such...
mount: Mounting /proc on /root/proc failed...
Target filesysem doesn't have /sbin/init
BusyBox 1:1.01-4
-----------------------------------------

Though I am running evms now, the transition to 2.6 is particularly
delicate because under 2.6 evms must control all partitions on a
disk.  Under 2.4 my root is a vanilla partition.  I've edited fstab
and lilo.conf in ways I think are appropriate, but the environment in
which initramfs runs is significantly different from that in which the
ramdisk will execute.  The change from devfs to udev is another
example of this.

I don't know what's going on, or even the extent to which this is an
initramfs-tools issue.  I'm happy to provide more info or conduct
other experiments.

Here are some configuration snippets
--------------------- fstab -----------------------------
# I use the next line for my current 2.4 system
/dev/sda8	/		ext2		defaults 1 1
# I use the line below for 2.6
#/dev/evms/newroot	/		ext2		defaults 1 1

# I was using devfs for 2.4, but have disabled it
# during the 2.6 transition.  2.6.15 doesn't do devfs
#devfs	/dev	devfs defaults 0 0

proc		/proc	proc	defaults	0 0
none		/proc/bus/usb	usbfs	defaults	0 0
# other partitions omitted
----------------------- lilo.conf ----------------------
prompt
default=debian
boot=/dev/sda
lba32
install=menu
map=/boot/map

# what I'm trying to use for the 2.6 kernel
image=/vmlinuz
	initrd=/initrd.img
	label=debian
	root=/dev/evms/newroot

# working for the 2.4 kernel
image=/vmlinuz.old
	label=debian-old
	root=/dev/discs/disc0/part8
	append="hda=ide-scsi hdb=ide-scsi"
--------------------------------------------------------

I've got 2.6 with evms running at home (built with the tools of a
couple months ago).

This system is dual-processor Athlon; one SCSI disk and some optical
drives.

My latest lilo run was triggered when I upgraded to the unstable
initramfs-tools.

-- System Information:
Debian Release: testing/unstable
  APT prefers testing
  APT policy: (500, 'testing'), (500, 'stable'), (50, 'unstable'), (40, 'experimental')
Architecture: i386 (i686)
Shell:  /bin/sh linked to /bin/bash
Kernel: Linux 2.4.27adnvcd
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)

Versions of packages initramfs-tools depends on:
ii  busybox                       1:1.01-4   Tiny utilities for small and embed
ii  cpio                          2.6-10     GNU cpio -- a program to manage ar
ii  klibc-utils                   1.2.2-3    small statically-linked utilities 
ii  udev                          0.085-1    /dev/ and hotplug management daemo

initramfs-tools recommends no packages.

-- no debconf information


--- End Message ---
--- Begin Message ---
bug was kept for documetational use for evms users.
as evms is no longer shipped in Lenny the stable release
such lilo interactions can no longer happen. thus closing.

thanks for report.

-- 
maks


--- End Message ---

Reply to: