[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#515205: linux-image-2.6.26-1-amd64: freshly installed debian with 64-bit kernel does not boot-up correctly



Package: linux-image-2.6.26-1-amd64
Version: 2.6.26-13
Severity: important

when booting, it holds on 'Waiting for /dev to be fully populated'.
CTRL+C continues boot.

when started kernel without QUIET parameter, there is following in the 
log
[    9.937812] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 20
[    9.937852] ACPI: PCI Interrupt 0000:00:0e.1[B] -> Link [AAZA] -> GSI 20 (level, low) -> IRQ 20
[    9.937968] PCI: Setting latency timer of device 0000:00:0e.1 to 64
[    9.938504] parport_pc 00:09: driver attached
[   10.350261] ACPI: PCI Interrupt Link [APC8] enabled at IRQ 16
[   10.350261] ACPI: PCI Interrupt 0000:04:01.0[A] -> Link [APC8] -> GSI 16 (level, low) -> IRQ 16
[   48.888355] Adding 12586916k swap on /dev/sdb3.  Priority:-1 extents:1 across:12586916k
[   49.270818] EXT3 FS on sdb1, internal journal

as it is visible, booting holds at 10th second.
cheers.


-- Package-specific info:
** Version:
Linux version 2.6.26-1-amd64 (Debian 2.6.26-13) (waldi@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-24)) #1 SMP Sat Jan 10 17:57:00 UTC 2009

** Command line:
root=/dev/sdb1 ro

** Tainted: P (1)

** Kernel log:
[    5.730388] sd 1:0:0:0: [sdb] Attached SCSI disk
[    6.348530] hda: Optiarc DVD RW AD-7203A, ATAPI CD/DVD-ROM drive
[    7.133026] hdb: HL-DT-STDVD-RAM GSA-H55L, ATAPI CD/DVD-ROM drive
[    7.188476] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[    7.188752] hda: UDMA/66 mode selected
[    7.192934] hdb: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[    7.192934] hdb: UDMA/66 mode selected
[    7.192934] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[    7.388906] hda: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 974kB Cache
[    7.388906] Uniform CD-ROM driver Revision: 3.20
[    7.396908] hdb: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache
[    7.489331] EXT3-fs: INFO: recovery required on readonly filesystem.
[    7.489331] EXT3-fs: write access will be enabled during recovery.
[    7.589330] kjournald starting.  Commit interval 5 seconds
[    7.589330] EXT3-fs: recovery complete.
[    7.589330] EXT3-fs: mounted filesystem with ordered data mode.
[    8.440850] udevd version 125 started
[    9.068284] input: Power Button (FF) as /class/input/input4
[    9.130585] ACPI: Power Button (FF) [PWRF]
[    9.130682] input: Power Button (CM) as /class/input/input5
[    9.189948] ACPI: Power Button (CM) [PWRB]
[    9.395130] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00
[    9.395130] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x1c40
[    9.486076] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    9.545265] shpchp: HPC vendor_id 1033 device_id 125 ss_vid 0 ss_did 0
[    9.545557] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    9.617821] usb-storage: device scan complete
[    9.618672] scsi 4:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
[    9.620416] scsi 4:0:0:1: Direct-Access     Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0
[    9.622091] scsi 4:0:0:2: Direct-Access     Generic  USB SM Reader    1.02 PQ: 0 ANSI: 0
[    9.624086] scsi 4:0:0:3: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
[    9.628913] sd 4:0:0:0: [sdc] Attached SCSI removable disk
[    9.632466] sd 4:0:0:1: [sdd] Attached SCSI removable disk
[    9.635994] sd 4:0:0:2: [sde] Attached SCSI removable disk
[    9.640036] sd 4:0:0:3: [sdf] Attached SCSI removable disk
[    9.705410] input: PC Speaker as /class/input/input6
[    9.730262] gameport: EMU10K1 is pci0000:04:01.1/gameport0, io 0xa800, speed 725kHz
[    9.842156] pnp: the driver 'parport_pc' has been registered
[    9.842156] parport_pc 00:09: reported by Plug and Play ACPI
[    9.842156] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[    9.937812] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 20
[    9.937852] ACPI: PCI Interrupt 0000:00:0e.1[B] -> Link [AAZA] -> GSI 20 (level, low) -> IRQ 20
[    9.937968] PCI: Setting latency timer of device 0000:00:0e.1 to 64
[    9.938504] parport_pc 00:09: driver attached
[   10.350261] ACPI: PCI Interrupt Link [APC8] enabled at IRQ 16
[   10.350261] ACPI: PCI Interrupt 0000:04:01.0[A] -> Link [APC8] -> GSI 16 (level, low) -> IRQ 16
[   48.888355] Adding 12586916k swap on /dev/sdb3.  Priority:-1 extents:1 across:12586916k
[   49.270818] EXT3 FS on sdb1, internal journal
[   49.902312] loop: module loaded
[   49.930823] device-mapper: uevent: version 1.0.3
[   49.931523] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
[   51.641688] fuse init (API version 7.9)
[   51.796259] kjournald starting.  Commit interval 5 seconds
[   51.797193] EXT3 FS on sda1, internal journal
[   51.797193] EXT3-fs: mounted filesystem with ordered data mode.
[   51.817542] kjournald starting.  Commit interval 5 seconds
[   51.818011] EXT3 FS on sda2, internal journal
[   51.818011] EXT3-fs: mounted filesystem with ordered data mode.
[   51.828046] kjournald starting.  Commit interval 30 seconds
[   51.830423] EXT3 FS on sda5, internal journal
[   51.830483] EXT3-fs: mounted filesystem with ordered data mode.
[   51.853542] kjournald starting.  Commit interval 5 seconds
[   51.853542] EXT3 FS on sda6, internal journal
[   51.853542] EXT3-fs: mounted filesystem with ordered data mode.
[   51.877542] kjournald starting.  Commit interval 5 seconds
[   51.877542] EXT3 FS on sda7, internal journal
[   51.877542] EXT3-fs: mounted filesystem with ordered data mode.
[   53.132868] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ processors (2 cpu cores) (version 2.20.00)
[   53.132868] powernow-k8:    0 : fid 0x16 (3000 MHz), vid 0x8
[   53.132868] powernow-k8:    1 : fid 0x14 (2800 MHz), vid 0xa
[   53.132868] powernow-k8:    2 : fid 0x12 (2600 MHz), vid 0xc
[   53.132868] powernow-k8:    3 : fid 0x10 (2400 MHz), vid 0xe
[   53.132868] powernow-k8:    4 : fid 0xe (2200 MHz), vid 0x10
[   53.132868] powernow-k8:    5 : fid 0xc (2000 MHz), vid 0x10
[   53.132868] powernow-k8:    6 : fid 0xa (1800 MHz), vid 0x10
[   53.132868] powernow-k8:    7 : fid 0x2 (1000 MHz), vid 0x12
[   53.601535] NET: Registered protocol family 10
[   53.602003] lo: Disabled Privacy Extensions
[   57.400601] Clocksource tsc unstable (delta = -67698349 ns)
[   58.424177] Bluetooth: Core ver 2.11
[   58.424771] NET: Registered protocol family 31
[   58.424771] Bluetooth: HCI device and connection manager initialized
[   58.424771] Bluetooth: HCI socket layer initialized
[   58.471487] Bluetooth: L2CAP ver 2.9
[   58.471520] Bluetooth: L2CAP socket layer initialized
[   58.476960] Bluetooth: RFCOMM socket layer initialized
[   58.477003] Bluetooth: RFCOMM TTY layer initialized
[   58.477038] Bluetooth: RFCOMM ver 1.8
[   58.599722] eth1: no link during initialization.
[   58.602185] ADDRCONF(NETDEV_UP): eth1: link is not ready
[   61.305269] nvidia: module license 'NVIDIA' taints kernel.
[   61.566805] ACPI: PCI Interrupt Link [APC6] enabled at IRQ 16
[   61.566810] ACPI: PCI Interrupt 0000:09:00.0[A] -> Link [APC6] -> GSI 16 (level, low) -> IRQ 16
[   61.566816] PCI: Setting latency timer of device 0000:09:00.0 to 64
[   61.567000] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  180.22  Tue Jan  6 09:15:58 PST 2009
[   75.739971] kjournald starting.  Commit interval 30 seconds
[   75.740990] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
[   75.741147] EXT3 FS on sdb2, internal journal
[   75.741152] EXT3-fs: mounted filesystem with ordered data mode.
[   76.856191] eth0_rename: no IPv6 routers present

** Loaded modules:
Module                  Size  Used by
nvidia               8105440  36 
rfcomm                 38176  0 
l2cap                  23936  5 rfcomm
bluetooth              57124  4 rfcomm,l2cap
battery                16904  0 
ipv6                  288328  24 
powernow_k8            17156  1 
cpufreq_powersave       6400  0 
cpufreq_conservative    11784  0 
cpufreq_ondemand       11792  0 
cpufreq_userspace       8452  1 
cpufreq_stats           9120  0 
freq_table              9344  3 powernow_k8,cpufreq_ondemand,cpufreq_stats
fuse                   53184  1 
dm_snapshot            19400  0 
dm_mirror              20608  0 
dm_log                 13956  1 dm_mirror
dm_mod                 58864  3 dm_snapshot,dm_mirror,dm_log
loop                   19468  0 
snd_emu10k1_synth      10752  0 
snd_emux_synth         36864  1 snd_emu10k1_synth
snd_seq_virmidi        10112  1 snd_emux_synth
snd_seq_midi_emul      10496  1 snd_emux_synth
snd_emu10k1           141536  3 snd_emu10k1_synth
firmware_class         12544  1 snd_emu10k1
snd_hda_intel         434904  0 
snd_ac97_codec        115416  1 snd_emu10k1
ac97_bus                6272  1 snd_ac97_codec
snd_pcm_oss            41760  1 
snd_mixer_oss          18816  1 snd_pcm_oss
parport_pc             31016  0 
parport                41776  1 parport_pc
snd_seq_dummy           7428  0 
snd_seq_oss            33152  0 
snd_pcm                81672  4 snd_emu10k1,snd_hda_intel,snd_ac97_codec,snd_pcm_oss
snd_util_mem            8960  2 snd_emux_synth,snd_emu10k1
psmouse                42268  0 
emu10k1_gp              7552  0 
snd_seq_midi           11072  0 
snd_rawmidi            26784  3 snd_seq_virmidi,snd_emu10k1,snd_seq_midi
pcspkr                  7040  0 
serio_raw               9860  0 
gameport               17040  2 emu10k1_gp
snd_seq_midi_event     11904  3 snd_seq_virmidi,snd_seq_oss,snd_seq_midi
snd_seq                54304  9 snd_emux_synth,snd_seq_virmidi,snd_seq_midi_emul,snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_hwdep              12040  2 snd_emux_synth,snd_emu10k1
k8temp                  9216  0 
snd_timer              25744  3 snd_emu10k1,snd_pcm,snd_seq
snd_seq_device         11668  8 snd_emu10k1_synth,snd_emux_synth,snd_emu10k1,snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
shpchp                 34080  0 
snd                    63688  16 snd_emux_synth,snd_seq_virmidi,snd_emu10k1,snd_hda_intel,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_seq_oss,snd_pcm,snd_rawmidi,snd_seq,snd_hwdep,snd_timer,snd_seq_device
soundcore              12064  2 snd
pci_hotplug            32056  1 shpchp
snd_page_alloc         13072  3 snd_emu10k1,snd_hda_intel,snd_pcm
i2c_nforce2            10752  0 
i2c_core               27936  2 nvidia,i2c_nforce2
button                 11680  0 
evdev                  14208  4 
ext3                  125072  7 
jbd                    51240  1 ext3
mbcache                12804  1 ext3
ide_cd_mod             36360  0 
cdrom                  37928  1 ide_cd_mod
sd_mod                 29376  10 
amd74xx                13448  0 [permanent]
usbhid                 45792  0 
hid                    41792  1 usbhid
ff_memless              9224  1 usbhid
usb_storage            94528  0 
pata_marvell            8832  0 
ide_pci_generic         9220  0 [permanent]
ide_core              128284  3 ide_cd_mod,amd74xx,ide_pci_generic
sata_nv                27528  8 
ahci                   33036  0 
forcedeth              54032  0 
ohci1394               32564  0 
ieee1394               93816  1 ohci1394
ata_generic            10116  0 
libata                165472  4 pata_marvell,sata_nv,ahci,ata_generic
scsi_mod              160760  3 sd_mod,usb_storage,libata
dock                   14112  1 libata
ehci_hcd               36108  0 
ohci_hcd               25092  0 
thermal                22688  0 
processor              42304  2 powernow_k8,thermal
fan                     9352  0 
thermal_sys            17728  3 thermal,processor,fan

** PCI devices:
00:00.0 RAM memory [0500]: nVidia Corporation C51 Host Bridge [10de:02f4] (rev a2)
	Subsystem: ASUSTeK Computer Inc. Device [1043:81fc]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>

00:00.1 RAM memory [0500]: nVidia Corporation C51 Memory Controller 0 [10de:02fa] (rev a2)
	Subsystem: ASUSTeK Computer Inc. Device [1043:81fc]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR+ <PERR- INTx-

00:00.2 RAM memory [0500]: nVidia Corporation C51 Memory Controller 1 [10de:02fe] (rev a2)
	Subsystem: ASUSTeK Computer Inc. Device [1043:81fc]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:00.3 RAM memory [0500]: nVidia Corporation C51 Memory Controller 5 [10de:02f8] (rev a2)
	Subsystem: ASUSTeK Computer Inc. Device [1043:81fc]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:00.4 RAM memory [0500]: nVidia Corporation C51 Memory Controller 4 [10de:02f9] (rev a2)
	Subsystem: ASUSTeK Computer Inc. Device [1043:81fc]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0

00:00.5 RAM memory [0500]: nVidia Corporation C51 Host Bridge [10de:02ff] (rev a2)
	Subsystem: ASUSTeK Computer Inc. Device [1043:81fc]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>

00:00.6 RAM memory [0500]: nVidia Corporation C51 Memory Controller 3 [10de:027f] (rev a2)
	Subsystem: ASUSTeK Computer Inc. Device [1043:81fc]
	Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:00.7 RAM memory [0500]: nVidia Corporation C51 Memory Controller 2 [10de:027e] (rev a2)
	Subsystem: ASUSTeK Computer Inc. Device [1043:81fc]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:04.0 PCI bridge [0604]: nVidia Corporation C51 PCI Express Bridge [10de:02fb] (rev a1) (prog-if 00 [Normal decode])
	Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport-driver
	Kernel modules: shpchp

00:08.0 RAM memory [0500]: nVidia Corporation MCP55 Memory Controller [10de:0369] (rev a1)
	Subsystem: nVidia Corporation Device [10de:cb84]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>

00:09.0 ISA bridge [0601]: nVidia Corporation MCP55 LPC Bridge [10de:0360] (rev a2)
	Subsystem: ASUSTeK Computer Inc. Device [1043:81fb]
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0

00:09.1 SMBus [0c05]: nVidia Corporation MCP55 SMBus [10de:0368] (rev a2)
	Subsystem: ASUSTeK Computer Inc. Device [1043:81fb]
	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin A routed to IRQ 255
	Region 4: I/O ports at 1c00 [size=64]
	Region 5: I/O ports at 1c40 [size=64]
	Capabilities: <access denied>
	Kernel driver in use: nForce2_smbus
	Kernel modules: i2c-nforce2

00:0a.0 USB Controller [0c03]: nVidia Corporation MCP55 USB Controller [10de:036c] (rev a1) (prog-if 10 [OHCI])
	Subsystem: ASUSTeK Computer Inc. Device [1043:81fb]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (750ns min, 250ns max)
	Interrupt: pin A routed to IRQ 23
	Region 0: Memory at fe02f000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: ohci_hcd
	Kernel modules: ohci-hcd

00:0a.1 USB Controller [0c03]: nVidia Corporation MCP55 USB Controller [10de:036d] (rev a2) (prog-if 20 [EHCI])
	Subsystem: ASUSTeK Computer Inc. Device [1043:81fb]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (750ns min, 250ns max)
	Interrupt: pin B routed to IRQ 22
	Region 0: Memory at fe02e000 (32-bit, non-prefetchable) [size=256]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd
	Kernel modules: ehci-hcd

00:0c.0 IDE interface [0101]: nVidia Corporation MCP55 IDE [10de:036e] (rev a1) (prog-if 8a [Master SecP PriP])
	Subsystem: ASUSTeK Computer Inc. Device [1043:81fb]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (750ns min, 250ns max)
	Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
	Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
	Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
	Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
	Region 4: I/O ports at f400 [size=16]
	Capabilities: <access denied>
	Kernel driver in use: AMD_IDE
	Kernel modules: ata_generic, ide-pci-generic, amd74xx

00:0d.0 IDE interface [0101]: nVidia Corporation MCP55 SATA Controller [10de:037f] (rev a2) (prog-if 85 [Master SecO PriO])
	Subsystem: ASUSTeK Computer Inc. Device [1043:81fb]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (750ns min, 250ns max)
	Interrupt: pin A routed to IRQ 23
	Region 0: I/O ports at 09f0 [size=8]
	Region 1: I/O ports at 0bf0 [size=4]
	Region 2: I/O ports at 0970 [size=8]
	Region 3: I/O ports at 0b70 [size=4]
	Region 4: I/O ports at e000 [size=16]
	Region 5: Memory at fe02d000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: sata_nv
	Kernel modules: sata_nv, ata_generic, ide-pci-generic

00:0d.1 IDE interface [0101]: nVidia Corporation MCP55 SATA Controller [10de:037f] (rev a2) (prog-if 85 [Master SecO PriO])
	Subsystem: ASUSTeK Computer Inc. Device [1043:81fb]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (750ns min, 250ns max)
	Interrupt: pin B routed to IRQ 22
	Region 0: I/O ports at 09e0 [size=8]
	Region 1: I/O ports at 0be0 [size=4]
	Region 2: I/O ports at 0960 [size=8]
	Region 3: I/O ports at 0b60 [size=4]
	Region 4: I/O ports at cc00 [size=16]
	Region 5: Memory at fe02c000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: sata_nv
	Kernel modules: sata_nv, ata_generic, ide-pci-generic

00:0d.2 IDE interface [0101]: nVidia Corporation MCP55 SATA Controller [10de:037f] (rev a2) (prog-if 85 [Master SecO PriO])
	Subsystem: ASUSTeK Computer Inc. Device [1043:81fb]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (750ns min, 250ns max)
	Interrupt: pin C routed to IRQ 21
	Region 0: I/O ports at c800 [size=8]
	Region 1: I/O ports at c400 [size=4]
	Region 2: I/O ports at c000 [size=8]
	Region 3: I/O ports at bc00 [size=4]
	Region 4: I/O ports at b800 [size=16]
	Region 5: Memory at fe02b000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: sata_nv
	Kernel modules: sata_nv, ata_generic, ide-pci-generic

00:0e.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI bridge [10de:0370] (rev a2) (prog-if 01 [Subtractive decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
	Memory behind bridge: fdf00000-fdffffff
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn+
	Capabilities: <access denied>

00:0e.1 Audio device [0403]: nVidia Corporation MCP55 High Definition Audio [10de:0371] (rev a2)
	Subsystem: ASUSTeK Computer Inc. Device [1043:81f6]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (500ns min, 1250ns max)
	Interrupt: pin B routed to IRQ 20
	Region 0: Memory at fe020000 (32-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: HDA Intel
	Kernel modules: snd-hda-intel

00:10.0 Bridge [0680]: nVidia Corporation MCP55 Ethernet [10de:0373] (rev a2)
	Subsystem: ASUSTeK Computer Inc. Device [1043:81fb]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (250ns min, 5000ns max)
	Interrupt: pin A routed to IRQ 1271
	Region 0: Memory at fe02a000 (32-bit, non-prefetchable) [size=4K]
	Region 1: I/O ports at b400 [size=8]
	Region 2: Memory at fe029000 (32-bit, non-prefetchable) [size=256]
	Region 3: Memory at fe028000 (32-bit, non-prefetchable) [size=16]
	Capabilities: <access denied>
	Kernel driver in use: forcedeth
	Kernel modules: forcedeth

00:11.0 Bridge [0680]: nVidia Corporation MCP55 Ethernet [10de:0373] (rev a2)
	Subsystem: ASUSTeK Computer Inc. Device [1043:81fb]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (250ns min, 5000ns max)
	Interrupt: pin A routed to IRQ 1272
	Region 0: Memory at fe027000 (32-bit, non-prefetchable) [size=4K]
	Region 1: I/O ports at b000 [size=8]
	Region 2: Memory at fe026000 (32-bit, non-prefetchable) [size=256]
	Region 3: Memory at fe025000 (32-bit, non-prefetchable) [size=16]
	Capabilities: <access denied>
	Kernel driver in use: forcedeth
	Kernel modules: forcedeth

00:12.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express bridge [10de:0376] (rev a2) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Bus: primary=00, secondary=03, subordinate=05, sec-latency=0
	I/O behind bridge: 0000a000-0000afff
	Memory behind bridge: fde00000-fdefffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport-driver
	Kernel modules: shpchp

00:14.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express bridge [10de:0374] (rev a2) (prog-if 00 [Normal decode])
	Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport-driver
	Kernel modules: shpchp

00:15.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express bridge [10de:0378] (rev a2) (prog-if 00 [Normal decode])
	Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport-driver
	Kernel modules: shpchp

00:16.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express bridge [10de:0375] (rev a2) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Bus: primary=00, secondary=08, subordinate=08, sec-latency=0
	I/O behind bridge: 00008000-00009fff
	Memory behind bridge: fdd00000-fddfffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport-driver
	Kernel modules: shpchp

00:17.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express bridge [10de:0377] (rev a2) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Bus: primary=00, secondary=09, subordinate=09, sec-latency=0
	I/O behind bridge: 00007000-00007fff
	Memory behind bridge: fa000000-fcffffff
	Prefetchable memory behind bridge: 00000000e0000000-00000000efffffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport-driver
	Kernel modules: shpchp

00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Capabilities: <access denied>

00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Capabilities: <access denied>
	Kernel driver in use: k8temp
	Kernel modules: k8temp

02:0b.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) [104c:8023] (prog-if 10 [OHCI])
	Subsystem: ASUSTeK Computer Inc. P5W DH Deluxe Motherboard [1043:815b]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32 (500ns min, 1000ns max), Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 19
	Region 0: Memory at fdfff000 (32-bit, non-prefetchable) [size=2K]
	Region 1: Memory at fdff8000 (32-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: ohci1394
	Kernel modules: ohci1394

03:00.0 PCI bridge [0604]: NEC Corporation uPD720400 PCI Express - PCI/PCI-X Bridge [1033:0125] (rev 06) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Bus: primary=03, secondary=04, subordinate=04, sec-latency=32
	I/O behind bridge: 0000a000-0000afff
	Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel modules: shpchp

03:00.1 PCI bridge [0604]: NEC Corporation uPD720400 PCI Express - PCI/PCI-X Bridge [1033:0125] (rev 06) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Region 0: Memory at fdeff000 (64-bit, non-prefetchable) [size=128]
	Bus: primary=03, secondary=05, subordinate=05, sec-latency=32
	Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: shpchp
	Kernel modules: shpchp

04:01.0 Multimedia audio controller [0401]: Creative Labs SB Live! EMU10k1 [1102:0002] (rev 0a)
	Subsystem: Creative Labs SBLive! 5.1 Digital Model SB0220 [1102:8065]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32 (500ns min, 5000ns max)
	Interrupt: pin A routed to IRQ 16
	Region 0: I/O ports at ac00 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: EMU10K1_Audigy
	Kernel modules: snd-emu10k1

04:01.1 Input device controller [0980]: Creative Labs SB Live! Game Port [1102:7002] (rev 0a)
	Subsystem: Creative Labs Gameport Joystick [1102:0020]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32
	Region 0: I/O ports at a800 [size=8]
	Capabilities: <access denied>
	Kernel driver in use: Emu10k1_gameport
	Kernel modules: emu10k1-gp

08:00.0 RAID bus controller [0104]: Marvell Technology Group Ltd. 88SE6145 SATA II PCI-E controller [11ab:6145] (rev a1) (prog-if 8f)
	Subsystem: ASUSTeK Computer Inc. Device [1043:8220]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (2000ns min), Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 16
	Region 0: I/O ports at 9c00 [size=8]
	Region 1: I/O ports at 9800 [size=4]
	Region 2: I/O ports at 9400 [size=8]
	Region 3: I/O ports at 9000 [size=4]
	Region 4: I/O ports at 8c00 [size=16]
	Region 5: Memory at fddff000 (32-bit, non-prefetchable) [size=1K]
	Expansion ROM at fdd80000 [disabled] [size=256K]
	Capabilities: <access denied>
	Kernel driver in use: pata_marvell
	Kernel modules: ahci, pata_marvell

09:00.0 VGA compatible controller [0300]: nVidia Corporation G70 [GeForce 7600 GS] [10de:0392] (rev a1) (prog-if 00 [VGA controller])
	Subsystem: ASUSTeK Computer Inc. Device [1043:822a]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at fa000000 (32-bit, non-prefetchable) [size=16M]
	Region 1: Memory at e0000000 (64-bit, prefetchable) [size=256M]
	Region 3: Memory at fb000000 (64-bit, non-prefetchable) [size=16M]
	Region 5: I/O ports at 7c00 [size=128]
	[virtual] Expansion ROM at fcfe0000 [disabled] [size=128K]
	Capabilities: <access denied>
	Kernel driver in use: nvidia
	Kernel modules: nvidiafb, nvidia



-- System Information:
Debian Release: 5.0
  APT prefers testing
  APT policy: (500, 'testing'), (500, 'stable')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.26-1-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages linux-image-2.6.26-1-amd64 depends on:
ii  debconf [debconf-2.0]         1.5.24     Debian configuration management sy
ii  initramfs-tools [linux-initra 0.92o      tools for generating an initramfs
ii  module-init-tools             3.4-1      tools for managing Linux kernel mo

linux-image-2.6.26-1-amd64 recommends no packages.

Versions of packages linux-image-2.6.26-1-amd64 suggests:
ii  grub                       0.97-47lenny2 GRand Unified Bootloader (Legacy v
pn  linux-doc-2.6.26           <none>        (no description available)

-- debconf information:
  linux-image-2.6.26-1-amd64/postinst/create-kimage-link-2.6.26-1-amd64: true
  shared/kernel-image/really-run-bootloader: true
  linux-image-2.6.26-1-amd64/postinst/kimage-is-a-directory:
  linux-image-2.6.26-1-amd64/preinst/bootloader-initrd-2.6.26-1-amd64: true
  linux-image-2.6.26-1-amd64/postinst/old-initrd-link-2.6.26-1-amd64: true
  linux-image-2.6.26-1-amd64/preinst/initrd-2.6.26-1-amd64:
  linux-image-2.6.26-1-amd64/postinst/old-system-map-link-2.6.26-1-amd64: true
  linux-image-2.6.26-1-amd64/postinst/depmod-error-initrd-2.6.26-1-amd64: false
  linux-image-2.6.26-1-amd64/preinst/overwriting-modules-2.6.26-1-amd64: true
  linux-image-2.6.26-1-amd64/preinst/elilo-initrd-2.6.26-1-amd64: true
  linux-image-2.6.26-1-amd64/postinst/bootloader-error-2.6.26-1-amd64:
  linux-image-2.6.26-1-amd64/preinst/abort-install-2.6.26-1-amd64:
  linux-image-2.6.26-1-amd64/preinst/lilo-initrd-2.6.26-1-amd64: true
  linux-image-2.6.26-1-amd64/postinst/depmod-error-2.6.26-1-amd64: false
  linux-image-2.6.26-1-amd64/prerm/removing-running-kernel-2.6.26-1-amd64: true
  linux-image-2.6.26-1-amd64/prerm/would-invalidate-boot-loader-2.6.26-1-amd64: true
  linux-image-2.6.26-1-amd64/postinst/bootloader-test-error-2.6.26-1-amd64:
  linux-image-2.6.26-1-amd64/preinst/abort-overwrite-2.6.26-1-amd64:
  linux-image-2.6.26-1-amd64/postinst/old-dir-initrd-link-2.6.26-1-amd64: true
  linux-image-2.6.26-1-amd64/preinst/lilo-has-ramdisk:
  linux-image-2.6.26-1-amd64/preinst/failed-to-move-modules-2.6.26-1-amd64:



Reply to: