[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#494341: marked as done (linux-image-2.6.25-2-686: cdc_ether USB based cable modem icmp works, tcp sockets connect but no data flows through)



Your message dated Thu, 12 Feb 2009 23:19:56 +0100
with message-id <20090212221956.GA6557@galadriel.inutil.org>
and subject line Re: linux-image-2.6.25-2-686: cdc_ether USB based cable modem icmp works, tcp sockets connect but no data flows through
has caused the Debian Bug report #494341,
regarding linux-image-2.6.25-2-686: cdc_ether USB based cable modem icmp works, tcp sockets connect but no data flows through
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
494341: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=494341
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message ---
Package: linux-image-2.6.25-2-686
Version: 2.6.25-7
Severity: important

ping & DNS work, sockets establish connection, but data isn't recieved 
(w3m shows "Waiting for site.com...")
This happens only when connected through the modem's USB interface. Same 
modem connected via ethernet works fine.
With kernel version 2.6.18, the USB interface works fine aswell.
With kernel version 2.6.22 the same problem is also present.

This is the exact hardware description:
[  376.664239] hub 5-0:1.0: unable to enumerate USB device on port 4
[  791.750037] usb 2-2: new full speed USB device using uhci_hcd and 
address 4
[  376.712223] usb 2-2: configuration #1 chosen from 1 choice
[  376.721402] eth1: register 'cdc_ether' at usb-0000:00:1d.1-2, CDC 
Ethernet Device, 00:18:9b:5b:c4:f6
[  376.725294] usb 2-2: New USB device found, idVendor=069b, 
idProduct=0704
[  376.725344] usb 2-2: New USB device strings: Mfr=1, Product=2, 
SerialNumber=3[  376.725388] usb 2-2: Product: Thomson USB CDC Device
[  376.725428] usb 2-2: Manufacturer: Thomson Inc.
[  376.725468] usb 2-2: SerialNumber: 00189B5BC4F6





-- Package-specific info:
** Version:
Linux version 2.6.25-2-686 (Debian 2.6.25-7) (maks@debian.org) (gcc version 4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 SMP Fri Jul 18 17:46:56 UTC 2008

** Command line:
auto BOOT_IMAGE=Linux ro root=802

** Not tainted

** Kernel log:
[    2.302755] usbcore: registered new interface driver usb-storage
[    2.302827] USB Mass Storage support registered.
[    2.305774] usb-storage: device found at 3
[    2.305780] usb-storage: waiting for device to settle before scanning
[    2.400346] hdc: TSSTcorpCD/DVDW TS-H552U, ATAPI CD/DVD-ROM drive
[    2.448196] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[    2.448412] hdc: UDMA/33 mode selected
[    2.448620] ide1 at 0x170-0x177,0x376 on irq 15
[    2.469081] hdc: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
[    2.469363] Uniform CD-ROM driver Revision: 3.20
[    2.671296] PM: Starting manual resume from disk
[    2.693417] ReiserFS: sda2: found reiserfs format "3.6" with standard journal
[    2.693496] ReiserFS: sda2: using ordered data mode
[    2.700941] ReiserFS: sda2: journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[    2.701503] ReiserFS: sda2: checking transaction log (sda2)
[    2.780671] ReiserFS: sda2: replayed 20 transactions in 2 seconds
[    2.780979] ReiserFS: sda2: Using r5 hash to sort names
[    3.711221] usb-storage: device scan complete
[    3.897385] scsi 2:0:0:0: Direct-Access     USB2.0   CardReader CF RW 0814 PQ: 0 ANSI: 0
[    3.898379] scsi 2:0:0:1: Direct-Access     USB2.0   CardReader Combo 0814 PQ: 0 ANSI: 0
[    3.901026] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[    3.902553] sd 2:0:0:1: [sdc] Attached SCSI removable disk
[    4.041695] input: PC Speaker as /class/input/input1
[    4.107772] Real Time Clock Driver v1.12ac
[    4.727457] parport_pc 00:09: reported by Plug and Play ACPI
[    4.727563] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[    4.818412] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    4.712711] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    5.214751] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[    5.214896] iTCO_wdt: Found a ICH5 or ICH5R TCO device (Version=1, TCOBASE=0x0460)
[    5.214991] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    5.379970] input: Power Button (FF) as /class/input/input2
[    5.428422] ACPI: Power Button (FF) [PWRF]
[    5.428624] input: Sleep Button (CM) as /class/input/input3
[    5.290598] Linux agpgart interface v0.103
[    5.476441] ACPI: Sleep Button (CM) [SLPB]
[    5.371162] ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17
[    5.631549] agpgart: Detected an Intel 865 Chipset.
[    5.631994] agpgart: Detected 16252K stolen memory.
[    5.643579] agpgart: AGP aperture is 128M @ 0xf0000000
[    5.691286] intel_rng: Firmware space is locked read-only. If you can't or
[    5.691290] intel_rng: don't want to disable this in firmware setup, and if
[    5.691293] intel_rng: you are certain that your system has a functional
[    5.691295] intel_rng: RNG, try using the 'no_fwh_detect' option.
[    5.777143] eth1: register 'cdc_ether' at usb-0000:00:1d.1-2, CDC Ethernet Device, 00:18:9b:5b:c4:f6
[    5.777242] usbcore: registered new interface driver cdc_ether
[    6.033682] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 17
[    6.033791] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[    6.340409] input: PS/2 Generic Mouse as /class/input/input4
[    6.412425] intel8x0_measure_ac97_clock: measured 52043 usecs
[    6.412480] intel8x0: clocking to 48000
[    6.880444] Adding 2988048k swap on /dev/sda6.  Priority:-1 extents:1 across:2988048k
[    7.313584] loop: module loaded
[    8.740573] ReiserFS: sda5: found reiserfs format "3.6" with standard journal
[    8.740573] ReiserFS: sda5: using ordered data mode
[    8.740573] ReiserFS: sda5: journal params: device sda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[    8.740573] ReiserFS: sda5: checking transaction log (sda5)
[    8.740573] ReiserFS: sda5: Using r5 hash to sort names
[    8.951622] NET: Registered protocol family 15
[    9.156599] padlock: VIA PadLock Hash Engine not detected.
[    9.228053] padlock: VIA PadLock Hash Engine not detected.
[    9.378249] padlock: VIA PadLock not detected.
[   10.446905] NET: Registered protocol family 10
[   10.447626] lo: Disabled Privacy Extensions
[   10.502501] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   10.678095] PPP generic driver version 2.4.2
[   11.055610] padlock: VIA PadLock Hash Engine not detected.
[   11.093584] padlock: VIA PadLock Hash Engine not detected.
[   11.200031] padlock: VIA PadLock not detected.
[   11.333897] Initializing XFRM netlink socket
[   11.512877] PPP Deflate Compression module registered
[   13.900901] lp0: using parport0 (interrupt-driven).
[   13.913230] ppdev: user-space parallel port driver
[   14.660950] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[   16.474536] [drm] Initialized drm 1.1.0 20060810
[   16.480424] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
[   16.480439] PCI: Setting latency timer of device 0000:00:02.0 to 64
[   16.480535] [drm] Initialized i915 1.6.0 20060119 on minor 0
[  772.664865] usb 2-2: USB disconnect, address 3
[  351.199989] eth1: unregister 'cdc_ether' usb-0000:00:1d.1-2, CDC Ethernet Device
[  351.870592] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
[  351.870592] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  352.230619] eth0: no IPv6 routers present
[  774.308956] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  774.313039] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
[  774.313266] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  376.664239] hub 5-0:1.0: unable to enumerate USB device on port 4
[  791.750037] usb 2-2: new full speed USB device using uhci_hcd and address 4
[  376.712223] usb 2-2: configuration #1 chosen from 1 choice
[  376.721402] eth1: register 'cdc_ether' at usb-0000:00:1d.1-2, CDC Ethernet Device, 00:18:9b:5b:c4:f6
[  376.725294] usb 2-2: New USB device found, idVendor=069b, idProduct=0704
[  376.725344] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  376.725388] usb 2-2: Product: Thomson USB CDC Device
[  376.725428] usb 2-2: Manufacturer: Thomson Inc.
[  376.725468] usb 2-2: SerialNumber: 00189B5BC4F6
[  423.491250] usb 2-2: USB disconnect, address 4
[  423.491461] eth1: unregister 'cdc_ether' usb-0000:00:1d.1-2, CDC Ethernet Device
[  827.548384] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  827.552406] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
[  827.552625] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

** Loaded modules:
Module                  Size  Used by
i915                   27744  2 
drm                    72280  3 i915
ppdev                   8676  0 
lp                     11012  0 
video                  19728  0 
output                  3712  1 video
ac                      4448  0 
battery                 8448  0 
ppp_deflate             5632  0 
xfrm_user              23488  2 
xfrm4_tunnel            2880  0 
tunnel4                 3656  1 xfrm4_tunnel
ipcomp                  7688  0 
esp4                    7744  0 
aead                    7872  1 esp4
ah4                     5984  0 
ppp_async              10976  1 
crc_ccitt               2176  1 ppp_async
ppp_generic            25628  6 ppp_deflate,ppp_async
slhc                    5856  1 ppp_generic
ipv6                  241956  20 
deflate                 3712  0 
zlib_deflate           17720  2 ppp_deflate,deflate
zlib_inflate           14496  2 ppp_deflate,deflate
ctr                     4992  0 
twofish                 8480  0 
twofish_common         13952  1 twofish
camellia               19328  0 
serpent                18848  0 
blowfish                8544  0 
des_generic            16832  0 
cbc                     4256  0 
aes_i586                8256  0 
aes_generic            29160  1 aes_i586
xcbc                    5320  0 
sha256_generic         11520  0 
sha1_generic            2592  0 
crypto_null             3232  0 
crypto_blkcipher       18116  3 ctr,cbc,crypto_null
af_key                 34676  0 
eeprom                  7024  0 
lm85                   25380  0 
hwmon_vid               3040  1 lm85
loop                   16708  0 
snd_intel8x0           31740  0 
snd_ac97_codec         91300  1 snd_intel8x0
ac97_bus                1952  1 snd_ac97_codec
snd_pcm_oss            37824  0 
snd_mixer_oss          14880  1 snd_pcm_oss
snd_pcm                68228  3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd_timer              21320  1 snd_pcm
snd                    48772  6 snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
cdc_ether               5760  0 
psmouse                35920  0 
intel_agp              25084  1 
soundcore               7488  1 snd
usbnet                 17928  1 cdc_ether
i2c_i801                9520  0 
rng_core                4900  0 
agpgart                31720  3 drm,intel_agp
snd_page_alloc          9992  2 snd_intel8x0,snd_pcm
button                  8240  0 
i2c_core               22548  3 eeprom,lm85,i2c_i801
serio_raw               6532  0 
iTCO_wdt               11204  0 
shpchp                 29716  0 
pci_hotplug            26980  1 shpchp
evdev                  11328  3 
parport_pc             25860  1 
parport                33868  3 ppdev,lp,parport_pc
rtc                    14272  0 
pcspkr                  3136  0 
reiserfs              203584  2 
ide_cd_mod             32864  0 
cdrom                  31872  1 ide_cd_mod
usb_storage            76896  0 
sd_mod                 26072  4 
piix                    7176  0 [permanent]
ide_pci_generic         4228  0 [permanent]
ide_core              100312  3 ide_cd_mod,piix,ide_pci_generic
ata_piix               20196  3 
floppy                 53284  0 
ata_generic             8004  0 
libata                142288  2 ata_piix,ata_generic
e100                   32716  0 
mii                     5248  2 usbnet,e100
scsi_mod              138668  3 usb_storage,sd_mod,libata
dock                   10448  1 libata
ehci_hcd               32620  0 
uhci_hcd               22352  0 
usbcore               130032  6 cdc_ether,usbnet,usb_storage,ehci_hcd,uhci_hcd
thermal                19100  0 
processor              39660  1 thermal
fan                     5636  0 

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub Interface [8086:2570] (rev 02)
	Subsystem: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub Interface [8086:2570]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 0
	Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M]
	Capabilities: <access denied>
	Kernel driver in use: agpgart-intel
	Kernel modules: intel-agp

00:02.0 VGA compatible controller [0300]: Intel Corporation 82865G Integrated Graphics Controller [8086:2572] (rev 02)
	Subsystem: Intel Corporation Device [8086:4246]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
	Region 1: Memory at ffa80000 (32-bit, non-prefetchable) [size=512K]
	Region 2: I/O ports at ec00 [size=8]
	Capabilities: <access denied>
	Kernel modules: intelfb

00:1d.0 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 [8086:24d2] (rev 02)
	Subsystem: Intel Corporation Device [8086:4246]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 16
	Region 4: I/O ports at c800 [size=32]
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci-hcd

00:1d.1 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 [8086:24d4] (rev 02)
	Subsystem: Intel Corporation Device [8086:4246]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 19
	Region 4: I/O ports at cc00 [size=32]
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci-hcd

00:1d.2 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 [8086:24d7] (rev 02)
	Subsystem: Intel Corporation Device [8086:4246]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin C routed to IRQ 18
	Region 4: I/O ports at d000 [size=32]
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci-hcd

00:1d.3 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4 [8086:24de] (rev 02)
	Subsystem: Intel Corporation Device [8086:4246]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 16
	Region 4: I/O ports at d400 [size=32]
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci-hcd

00:1d.7 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller [8086:24dd] (rev 02) (prog-if 20)
	Subsystem: Intel Corporation Device [8086:4246]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin D routed to IRQ 23
	Region 0: Memory at ffa7fc00 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd
	Kernel modules: ehci-hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev c2)
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
	I/O behind bridge: 0000b000-0000bfff
	Memory behind bridge: ff800000-ff8fffff
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
	Kernel modules: shpchp

00:1f.0 ISA bridge [0601]: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge [8086:24d0] (rev 02)
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Kernel modules: intel-rng, iTCO_wdt

00:1f.1 IDE interface [0101]: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller [8086:24db] (rev 02) (prog-if 8a [Master SecP PriP])
	Subsystem: Intel Corporation Device [8086:4246]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
	Latency: 0
	Interrupt: pin A routed to IRQ 18
	Region 0: I/O ports at 01f0 [size=8]
	Region 1: I/O ports at 03f4 [size=1]
	Region 2: I/O ports at 0170 [size=8]
	Region 3: I/O ports at 0374 [size=1]
	Region 4: I/O ports at ffa0 [size=16]
	Region 5: Memory at 40000000 (32-bit, non-prefetchable) [size=1K]
	Kernel driver in use: PIIX_IDE
	Kernel modules: piix

00:1f.2 IDE interface [0101]: Intel Corporation 82801EB (ICH5) SATA Controller [8086:24d1] (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
	Subsystem: Intel Corporation Device [8086:4246]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 18
	Region 0: I/O ports at e800 [size=8]
	Region 1: I/O ports at e400 [size=4]
	Region 2: I/O ports at e000 [size=8]
	Region 3: I/O ports at dc00 [size=4]
	Region 4: I/O ports at d800 [size=16]
	Kernel driver in use: ata_piix
	Kernel modules: ata_piix

00:1f.3 SMBus [0c05]: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller [8086:24d3] (rev 02)
	Subsystem: Intel Corporation Device [8086:4246]
	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin B routed to IRQ 17
	Region 4: I/O ports at c400 [size=32]
	Kernel driver in use: i801_smbus
	Kernel modules: i2c-i801

00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller [8086:24d5] (rev 02)
	Subsystem: Intel Corporation Device [8086:e001]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 17
	Region 2: Memory at ffa7f800 (32-bit, non-prefetchable) [size=512]
	Region 3: Memory at ffa7f400 (32-bit, non-prefetchable) [size=256]
	Capabilities: <access denied>
	Kernel driver in use: Intel ICH
	Kernel modules: snd-intel8x0

01:08.0 Ethernet controller [0200]: Intel Corporation 82562EZ 10/100 Ethernet Controller [8086:1050] (rev 01)
	Subsystem: Intel Corporation Device [8086:302f]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32 (2000ns min, 14000ns max), Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 20
	Region 0: Memory at ff8ff000 (32-bit, non-prefetchable) [size=4K]
	Region 1: I/O ports at bc00 [size=64]
	Capabilities: <access denied>
	Kernel driver in use: e100
	Kernel modules: eepro100, e100



-- System Information:
Debian Release: lenny/sid
  APT prefers testing
  APT policy: (500, 'testing')
Architecture: i386 (i686)

Kernel: Linux 2.6.25-2-686 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages linux-image-2.6.25-2-686 depends on:
ii  debconf [debconf-2.0]         1.5.22     Debian configuration management sy
ii  initramfs-tools [linux-initra 0.92e      tools for generating an initramfs
ii  module-init-tools             3.4-1      tools for managing Linux kernel mo

Versions of packages linux-image-2.6.25-2-686 recommends:
ii  libc6-i686                    2.7-10     GNU C Library: Shared libraries [i

Versions of packages linux-image-2.6.25-2-686 suggests:
ii  grub                          0.97-44    GRand Unified Bootloader (Legacy v
ii  lilo                          1:22.8-6   LInux LOader - The Classic OS load
ii  linux-doc-2.6.25              2.6.25-7   Linux kernel specific documentatio

-- debconf-show failed



--- End Message ---
--- Begin Message ---
On Mon, Jan 19, 2009 at 01:06:02AM +0100, AlbertoP wrote:
> Package: linux-2.6
> Followup-For: Bug #494341
> 
> 
> >> ping & DNS work, sockets establish connection, but data isn't
> >> recieved (w3m shows "Waiting for site.com...")
> >> This happens only when connected through the modem's USB interface.
> >> Same modem connected via ethernet works fine.
> >> With kernel version 2.6.18, the USB interface works fine aswell.
> >> With kernel version 2.6.22 the same problem is also present.
> > Does this error still occur with more recent kernel versions, such
> > as the current Lenny kernel?
> 
> Now I'm using cdc_ether without problems, but I have a different router 
> even if I  use the same connection and the same driver.

Thanks, closing the bug then.

Cheers,
        Moritz


--- End Message ---

Reply to: