Your message dated Tue, 10 Feb 2009 22:26:05 +1100 with message-id <20090210112605.GR28140@debianrules.debiancolombia.org> and subject line Re: Bug#510568: not a bug has caused the Debian Bug report #510568, regarding linux-image-2.6.26-1-486: rt73usb driver randomly crashes to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@bugs.debian.org immediately.) -- 510568: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=510568 Debian Bug Tracking System Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: submit@bugs.debian.org
- Subject: linux-image-2.6.26-1-486: rt73usb driver randomly crashes
- From: "Łukasz Fidosz" <virhilo@gmail.com>
- Date: Sat, 3 Jan 2009 11:05:45 +0100
- Message-id: <d3ff2d140901030205ucd3919dk1bc4edaa4536026a@mail.gmail.com>
Subject: linux-image-2.6.26-1-486: rt73usb driver randomly crashes Package: linux-image-2.6.26-1-486 Version: 2.6.26-12 Severity: important The rt73usb kernel module randomly crases, I found the informaton about crash in syslog: Jan 3 03:53:10 darkstar kernel: [22562.538975] usb 1-2: USB disconnect, address 2 Jan 3 03:53:10 darkstar kernel: [22562.548547] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x3040 with error -19. Jan 3 03:53:10 darkstar kernel: [22562.548641] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x3040 with error -19. Jan 3 03:53:10 darkstar kernel: [22562.548718] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x3028 with error -19. Jan 3 03:53:10 darkstar kernel: [22562.548793] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x3064 with error -19. Jan 3 03:53:10 darkstar kernel: [22562.548872] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x0c failed for offset 0x0000 with error -19. Jan 3 03:53:10 darkstar kernel: [22562.548998] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x0a failed for offset 0x0000 with error -19. Jan 3 03:53:10 darkstar kernel: [22562.549239] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x0a failed for offset 0x0000 with error -19. Jan 3 03:53:10 darkstar kernel: [22562.549378] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x0a failed for offset 0x0000 with error -19. Jan 3 03:53:10 darkstar kernel: [22562.549515] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x0a failed for offset 0x0000 with error -19. Jan 3 03:53:11 darkstar kernel: [22562.904061] usb 1-2: new high speed USB device using ehci_hcd and address 3 Jan 3 03:53:26 darkstar kernel: [22577.996151] hub 1-0:1.0: unable to enumerate USB device on port 2 Jan 3 03:53:26 darkstar kernel: [22578.376059] usb 2-2: new full speed USB device using uhci_hcd and address 2 Jan 3 03:53:26 darkstar kernel: [22578.563784] usb 2-2: not running at top speed; connect to a high speed hub Jan 3 03:53:27 darkstar kernel: [22578.685201] usb 2-2: configuration #1 chosen from 1 choice Jan 3 03:53:27 darkstar kernel: [22578.954948] phy1: Selected rate control algorithm 'pid' Jan 3 03:53:27 darkstar kernel: [22578.956841] Registered led device: rt73usb-phy1:radio Jan 3 03:53:27 darkstar kernel: [22578.956957] Registered led device: rt73usb-phy1:assoc Jan 3 03:53:27 darkstar kernel: [22578.957058] Registered led device: rt73usb-phy1:quality Jan 3 03:53:27 darkstar kernel: [22579.031496] usb 2-2: New USB device found, idVendor=148f, idProduct=2573 Jan 3 03:53:27 darkstar kernel: [22579.031528] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 Jan 3 03:53:27 darkstar kernel: [22579.031548] usb 2-2: Product: 802.11 bg WLAN Jan 3 03:53:27 darkstar kernel: [22579.031563] usb 2-2: Manufacturer: Ralink -- Package-specific info: ** Version: Linux version 2.6.26-1-486 (Debian 2.6.26-12) (waldi@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-24)) #1 Mon Dec 15 17:32:01 UTC 2008 ** Command line: root=/dev/hdc1 ro quiet ** Not tainted ** Kernel log: [ 7.850962] uhci_hcd 0000:00:10.2: VIA VLink IRQ fixup, from 9 to 11 [ 7.851015] uhci_hcd 0000:00:10.2: UHCI Host Controller [ 7.851235] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 [ 7.851296] uhci_hcd 0000:00:10.2: irq 11, io base 0x0000dc00 [ 7.851880] usb usb4: configuration #1 chosen from 1 choice [ 7.852106] hub 4-0:1.0: USB hub found [ 7.852171] hub 4-0:1.0: 2 ports detected [ 7.880095] usb 1-2: new high speed USB device using ehci_hcd and address 2 [ 7.956631] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 7.956657] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.956678] usb usb4: Product: UHCI Host Controller [ 7.956694] usb usb4: Manufacturer: Linux 2.6.26-1-486 uhci_hcd [ 7.956711] usb usb4: SerialNumber: 0000:00:10.2 [ 8.199684] usb 1-2: configuration #1 chosen from 1 choice [ 8.200592] usb 1-2: New USB device found, idVendor=148f, idProduct=2573 [ 8.200614] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 8.200634] usb 1-2: Product: 802.11 bg WLAN [ 8.200649] usb 1-2: Manufacturer: Ralink [ 8.824111] libata version 3.00 loaded. [ 8.950909] Uniform Multi-Platform E-IDE driver [ 8.950936] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 9.198163] VP_IDE: IDE controller (0x1106:0x0571 rev 0x06) at PCI slot 0000:00:11.1 [ 9.198237] ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 9.198273] VIA_IDE 0000:00:11.1: VIA VLink IRQ fixup, from 255 to 11 [ 9.198326] VP_IDE: not 100% native mode: will probe irqs later [ 9.198393] VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1 [ 9.198429] ide0: BM-DMA at 0xe000-0xe007 [ 9.198464] ide1: BM-DMA at 0xe008-0xe00f [ 9.198491] Probing IDE interface ide0... [ 9.772260] Probing IDE interface ide1... [ 10.112775] Marking TSC unstable due to: TSC halts in idle. [ 10.188165] hdc: ST380215A, ATA DISK drive [ 10.860253] hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4 [ 10.860486] hdc: UDMA/100 mode selected [ 10.860771] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 10.860999] ide1 at 0x170-0x177,0x376 on irq 15 [ 10.982991] hdc: max request size: 512KiB [ 11.032225] hdc: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=16383/255/63 [ 11.056437] hdc: cache flushes supported [ 11.056437] hdc: hdc1 hdc2 < hdc5 hdc6 > [ 11.492534] PM: Starting manual resume from disk [ 11.555590] ReiserFS: hdc1: found reiserfs format "3.6" with standard journal [ 11.555631] ReiserFS: hdc1: using ordered data mode [ 11.559725] ReiserFS: hdc1: journal params: device hdc1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 11.568448] ReiserFS: hdc1: checking transaction log (hdc1) [ 21.268393] ReiserFS: hdc1: replayed 2153 transactions in 9 seconds [ 21.284336] ReiserFS: hdc1: Using r5 hash to sort names [ 23.868749] udevd version 125 started [ 31.579830] Linux agpgart interface v0.103 [ 31.646004] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 31.915689] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 31.950701] agpgart: Detected VIA CLE266 chipset [ 31.951750] agpgart: AGP aperture is 4M @ 0xe6000000 [ 33.377627] parport_pc 00:0a: reported by Plug and Play ACPI [ 33.377689] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] [ 34.974605] phy0: Selected rate control algorithm 'pid' [ 37.591279] input: Power Button (FF) as /class/input/input1 [ 37.743385] ACPI: Power Button (FF) [PWRF] [ 37.743750] input: Power Button (CM) as /class/input/input2 [ 37.765328] ACPI: Power Button (CM) [PWRB] [ 41.402529] Registered led device: rt73usb-phy0:radio [ 41.402651] Registered led device: rt73usb-phy0:assoc [ 41.402751] Registered led device: rt73usb-phy0:quality [ 41.403445] usbcore: registered new interface driver rt73usb [ 41.792116] usbcore: registered new interface driver rt2500usb [ 44.167805] Adding 2000052k swap on /dev/hdc5. Priority:-1 extents:1 across:2000052k [ 51.151787] loop: module loaded [ 51.256506] vt1211: Found VT1211 chip at 0x6000, revision 2 [ 55.003625] JFS: nTxBlock = 3904, nTxLock = 31233 [ 56.427281] firmware: requesting rt73.bin [ 59.058000] wlan0: Initial auth_alg=0 [ 59.058032] wlan0: authenticate with AP 00:18:39:a7:13:50 [ 59.059789] wlan0: RX authentication from 00:18:39:a7:13:50 (alg=0 transaction=2 status=0) [ 59.059811] wlan0: authenticated [ 59.059831] wlan0: associate with AP 00:18:39:a7:13:50 [ 59.063516] wlan0: RX AssocResp from 00:18:39:a7:13:50 (capab=0x411 status=0 aid=3) [ 59.063538] wlan0: associated [ 59.063591] wlan0: switched to short barker preamble (BSSID=00:18:39:a7:13:50) [ 62.954327] ip_tables: (C) 2000-2006 Netfilter Core Team [ 1842.760286] wlan0: CTS protection enabled (BSSID=00:18:39:a7:13:50) [ 1854.843529] wlan0: CTS protection disabled (BSSID=00:18:39:a7:13:50) [ 3607.064074] wlan0: No ProbeResp from current AP 00:18:39:a7:13:50 - assume out of range [ 3608.096643] wlan0: Initial auth_alg=0 [ 3608.096678] wlan0: authenticate with AP 00:18:39:a7:13:50 [ 3608.105515] wlan0: Initial auth_alg=0 [ 3608.105547] wlan0: authenticate with AP 00:18:39:a7:13:50 [ 3608.304074] wlan0: authenticate with AP 00:18:39:a7:13:50 [ 3608.504074] wlan0: authenticate with AP 00:18:39:a7:13:50 [ 3608.704070] wlan0: authentication with AP 00:18:39:a7:13:50 timed out [ 3619.032703] wlan0: Initial auth_alg=0 [ 3619.032738] wlan0: authenticate with AP 00:18:39:a7:13:50 [ 3619.041322] wlan0: Initial auth_alg=0 [ 3619.041354] wlan0: authenticate with AP 00:18:39:a7:13:50 [ 3619.041425] wlan0: RX authentication from 00:18:39:a7:13:50 (alg=0 transaction=2 status=0) [ 3619.041445] wlan0: authenticated [ 3619.041467] wlan0: associate with AP 00:18:39:a7:13:50 [ 3619.044139] wlan0: authentication frame received from 00:18:39:a7:13:50, but not in authenticate state - ignored [ 3619.046753] wlan0: RX ReassocResp from 00:18:39:a7:13:50 (capab=0x411 status=0 aid=3) [ 3619.046779] wlan0: associated [ 3619.046833] wlan0: switched to short barker preamble (BSSID=00:18:39:a7:13:50) ** Loaded modules: Module Size Used by xt_tcpudp 2816 1 iptable_filter 2560 1 ip_tables 9616 1 iptable_filter x_tables 12932 2 xt_tcpudp,ip_tables jfs 148060 1 nls_base 6528 1 jfs vt1211 13192 0 hwmon_vid 2560 1 vt1211 loop 12428 0 rt2500usb 19968 0 arc4 1792 2 ecb 2560 2 crypto_blkcipher 14724 1 ecb button 6032 0 rt73usb 22400 0 crc_itu_t 2048 1 rt73usb rt2x00usb 9728 2 rt2500usb,rt73usb rt2x00lib 22272 3 rt2500usb,rt73usb,rt2x00usb firmware_class 6656 1 rt2x00lib rfkill 5524 1 rt2x00lib led_class 3844 1 rt2x00lib input_polldev 3720 1 rt2x00lib i2c_viapro 6804 0 parport_pc 22436 0 parport 30408 1 parport_pc i2c_core 19728 1 i2c_viapro mac80211 137756 2 rt2x00usb,rt2x00lib cfg80211 21384 2 rt2x00lib,mac80211 via_agp 7680 1 shpchp 25496 0 pci_hotplug 23204 1 shpchp agpgart 28336 1 via_agp evdev 7808 0 reiserfs 187008 1 ide_disk 10496 4 ide_pci_generic 3844 0 [permanent] via82cxxx 6916 0 [permanent] ide_core 95144 3 ide_disk,ide_pci_generic,via82cxxx ata_generic 4612 0 libata 141088 1 ata_generic uhci_hcd 18448 0 ehci_hcd 28300 0 scsi_mod 129804 1 libata dock 8076 1 libata usbcore 117616 6 rt2500usb,rt73usb,rt2x00usb,uhci_hcd,ehci_hcd via_rhine 18184 0 mii 4864 1 via_rhine thermal 15132 0 processor 28080 2 thermal thermal_sys 10784 2 thermal,processor -- System Information: Debian Release: 5.0 APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.26-1-486 Locale: LANG=pl_PL.UTF-8, LC_CTYPE=pl_PL.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-2.6.26-1-486 depends on: ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy ii initramfs-tools [linux-initra 0.92n tools for generating an initramfs ii module-init-tools 3.4-1 tools for managing Linux kernel mo linux-image-2.6.26-1-486 recommends no packages. Versions of packages linux-image-2.6.26-1-486 suggests: ii grub 0.97-47lenny1 GRand Unified Bootloader (Legacy v pn linux-doc-2.6.26 <none> (no description available)
--- End Message ---
--- Begin Message ---
- To: Lukasz Fidosz <virhilo@gmail.com>, 510568-done@bugs.debian.org
- Subject: Re: Bug#510568: not a bug
- From: Aníbal Monsalve Salazar <anibal@debian.org>
- Date: Tue, 10 Feb 2009 22:26:05 +1100
- Message-id: <20090210112605.GR28140@debianrules.debiancolombia.org>
- In-reply-to: <[🔎] d3ff2d140902100251n2946fa79mc58c2853a67dd52e@mail.gmail.com>
- References: <[🔎] d3ff2d140902100251n2946fa79mc58c2853a67dd52e@mail.gmail.com>
Version: 2.6.26-12 On Tue, Feb 10, 2009 at 11:51:47AM +0100, Lukasz Fidosz wrote: >Now I can confim that it is not a bug, becouse a source of the error >was my dammaged network card. I'm closing this bug accordingly.Attachment: signature.asc
Description: Digital signature
--- End Message ---