unarchive 475055 found 475055 2.6.26-10 thanks Hello, I'm still seeing this behaviour, from time to time, on my Thinkpad X31. I don't have the exact error message (I would need to take a picture for that ;) but it really looks like the one describe in this bug report and at the end of this page: http://www.thinkwiki.org/wiki/Problems_with_ACPI_suspend-to-ram I feel this issue is not resolved and should be reopened. I'm available for testing new kernels, recompile with patches, anything to get my suspend working. ;) I have tried to turn on/off/disable HPA in the BIOS, nothing works. I include a dmesg and non-verbose lspci (more available upon request). (Should I open a new bug report since this one is archived?) [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.26-1-686 (Debian 2.6.26-10) (waldi@debian.org) (gcc version 4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 SMP Sat Nov 8 19:00:26 UTC 2008 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000001ff60000 (usable) [ 0.000000] BIOS-e820: 000000001ff60000 - 000000001ff77000 (ACPI data) [ 0.000000] BIOS-e820: 000000001ff77000 - 000000001ff79000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000001ff80000 - 0000000020000000 (reserved) [ 0.000000] BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 511MB LOWMEM available. [ 0.000000] Entering add_active_range(0, 0, 130912) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 130912 [ 0.000000] HighMem 130912 -> 130912 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 130912 [ 0.000000] On node 0 totalpages: 130912 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 991 pages used for memmap [ 0.000000] Normal zone: 125825 pages, LIFO batch:31 [ 0.000000] HighMem zone: 0 pages used for memmap [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP 000F6D70, 0024 (r2 IBM ) [ 0.000000] ACPI: XSDT 1FF69E78, 004C (r1 IBM TP-1Q 3020 LTP 0) [ 0.000000] ACPI: FACP 1FF69F00, 00F4 (r3 IBM TP-1Q 3020 IBM 1) [ 0.000000] ACPI Warning (tbfadt-0442): Optional field "Gpe1Block" has zero address or length: 000000000000102C/0 [20080321] [ 0.000000] ACPI: DSDT 1FF6A0E7, CD2A (r1 IBM TP-1Q 3020 MSFT 100000E) [ 0.000000] ACPI: FACS 1FF78000, 0040 [ 0.000000] ACPI: SSDT 1FF6A0B4, 0033 (r1 IBM TP-1Q 3020 MSFT 100000E) [ 0.000000] ACPI: ECDT 1FF76E11, 0052 (r1 IBM TP-1Q 3020 IBM 1) [ 0.000000] ACPI: TCPA 1FF76E63, 0032 (r1 IBM TP-1Q 3020 PTL 1) [ 0.000000] ACPI: BOOT 1FF76FD8, 0028 (r1 IBM TP-1Q 3020 LTP 1) [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:df800000) [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000 [ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000 [ 0.000000] SMP: Allowing 0 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 37960 bytes of per cpu data [ 0.000000] NR_CPUS: 8, nr_cpu_ids: 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129889 [ 0.000000] Kernel command line: root=/dev/mapper/mumia-root ro acpi_sleep=s3_bios,s3_mode video=vesafb:invers vga=791 [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic" [ 0.000000] mapped APIC to ffffb000 (0140d000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes) [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Detected 599.501 MHz processor. [ 0.004000] Console: colour dummy device 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.004000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.004000] Memory: 507716k/523648k available (1768k kernel code, 15416k reserved, 752k data, 244k init, 0k highmem) [ 0.004000] virtual kernel memory layout: [ 0.004000] fixmap : 0xfff4c000 - 0xfffff000 ( 716 kB) [ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.004000] vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB) [ 0.004000] lowmem : 0xc0000000 - 0xdff60000 ( 511 MB) [ 0.004000] .init : 0xc037f000 - 0xc03bc000 ( 244 kB) [ 0.004000] .data : 0xc02ba30b - 0xc0376620 ( 752 kB) [ 0.004000] .text : 0xc0100000 - 0xc02ba30b (1768 kB) [ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated [ 0.084403] Calibrating delay using timer specific routine.. 1200.75 BogoMIPS (lpj=2401512) [ 0.084529] Security Framework initialized [ 0.084550] SELinux: Disabled at boot. [ 0.084568] Capability LSM initialized [ 0.084619] Mount-cache hash table entries: 512 [ 0.084986] Initializing cgroup subsys ns [ 0.085005] Initializing cgroup subsys cpuacct [ 0.085022] Initializing cgroup subsys devices [ 0.085080] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.085098] CPU: L2 cache: 1024K [ 0.085114] Intel machine check architecture supported. [ 0.085136] Intel machine check reporting enabled on CPU#0. [ 0.085172] Checking 'hlt' instruction... OK. [ 0.101102] SMP alternatives: switching to UP code [ 0.115273] Freeing SMP alternatives: 16k freed [ 0.115290] ACPI: Core revision 20080321 [ 0.150642] ACPI: setting ELCR to 0200 (from 0800) [ 0.156009] weird, boot CPU (#0) not listedby the BIOS. [ 0.156009] SMP motherboard not detected. [ 0.156009] Local APIC not detected. Using dummy APIC emulation. [ 0.156009] SMP disabled [ 0.156009] Brought up 1 CPUs [ 0.156009] Total of 1 processors activated (1200.75 BogoMIPS). [ 0.156009] CPU0 attaching sched-domain: [ 0.156009] domain 0: span 0 [ 0.156009] groups: 0 [ 0.156009] net_namespace: 660 bytes [ 0.156009] Booting paravirtualized kernel on bare hardware [ 0.156009] NET: Registered protocol family 16 [ 0.156009] ACPI: bus type pci registered [ 0.156009] PCI: PCI BIOS revision 2.10 entry at 0xfd8d6, last bus=8 [ 0.156009] PCI: Using configuration type 1 for base access [ 0.156009] Setting up standard PCI resources [ 0.164945] ACPI: EC: EC description table is found, configuring boot EC [ 0.183343] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 0.207951] ACPI: Interpreter enabled [ 0.207970] ACPI: (supports S0 S3 S4 S5) [ 0.208013] ACPI: Using PIC for interrupt routing [ 0.236683] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62 [ 0.236706] ACPI: EC: driver started in interrupt mode [ 0.236843] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.237504] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO [ 0.237532] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH4 GPIO [ 0.238339] PCI: Transparent bridge - 0000:00:1e.0 [ 0.238427] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.238590] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 0.238663] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] [ 0.245870] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) [ 0.246482] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) [ 0.247088] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) [ 0.247697] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) [ 0.248317] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) [ 0.248879] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.249446] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.250060] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) [ 0.250827] ACPI: Power Resource [PUBS] (on) [ 0.251040] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.251135] pnp: PnP ACPI init [ 0.251162] ACPI: bus type pnp registered [ 0.263063] pnp: PnP ACPI: found 13 devices [ 0.263081] ACPI: ACPI bus type pnp unregistered [ 0.263098] PnPBIOS: Disabled by ACPI PNP [ 0.263765] PCI: Using ACPI for IRQ routing [ 0.264133] ACPI: RTC can wake from S4 [ 0.264208] system 00:00: iomem range 0x0-0x9ffff could not be reserved [ 0.264229] system 00:00: iomem range 0xc0000-0xc3fff could not be reserved [ 0.264250] system 00:00: iomem range 0xc4000-0xc7fff could not be reserved [ 0.264271] system 00:00: iomem range 0xc8000-0xcbfff could not be reserved [ 0.264292] system 00:00: iomem range 0xcc000-0xcffff could not be reserved [ 0.264313] system 00:00: iomem range 0xdc000-0xdffff has been reserved [ 0.264333] system 00:00: iomem range 0xe0000-0xe3fff could not be reserved [ 0.264354] system 00:00: iomem range 0xe4000-0xe7fff could not be reserved [ 0.264375] system 00:00: iomem range 0xe8000-0xebfff could not be reserved [ 0.264396] system 00:00: iomem range 0xec000-0xeffff could not be reserved [ 0.264417] system 00:00: iomem range 0xf0000-0xfffff could not be reserved [ 0.264438] system 00:00: iomem range 0x100000-0x1fffffff could not be reserved [ 0.264463] system 00:00: iomem range 0xfec00000-0xffffffff could not be reserved [ 0.264498] system 00:02: ioport range 0x1000-0x107f has been reserved [ 0.264519] system 00:02: ioport range 0x1180-0x11bf has been reserved [ 0.264539] system 00:02: ioport range 0x15e0-0x15ef has been reserved [ 0.264559] system 00:02: ioport range 0x1600-0x167f has been reserved [ 0.295639] PCI: Bridge: 0000:00:01.0 [ 0.295656] IO window: 3000-3fff [ 0.295672] MEM window: 0xc0100000-0xc01fffff [ 0.295689] PREFETCH window: 0x00000000e0000000-0x00000000e7ffffff [ 0.295720] PCI: Bus 3, cardbus bridge: 0000:02:00.0 [ 0.295735] IO window: 0x00004000-0x000040ff [ 0.295752] IO window: 0x00004400-0x000044ff [ 0.295770] PREFETCH window: 0xe8000000-0xebffffff [ 0.295788] MEM window: 0xc4000000-0xc7ffffff [ 0.295805] PCI: Bus 7, cardbus bridge: 0000:02:00.1 [ 0.295820] IO window: 0x00004800-0x000048ff [ 0.295837] IO window: 0x00004c00-0x00004cff [ 0.295854] PREFETCH window: 0xec000000-0xefffffff [ 0.295873] MEM window: 0xc8000000-0xcbffffff [ 0.295889] PCI: Bridge: 0000:00:1e.0 [ 0.295904] IO window: 4000-8fff [ 0.295921] MEM window: 0xc0200000-0xcfffffff [ 0.295939] PREFETCH window: 0x00000000e8000000-0x00000000efffffff [ 0.295978] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 0.297032] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 [ 0.297052] PCI: setting IRQ 11 as level-triggered [ 0.297061] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 0.298096] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 [ 0.298115] ACPI: PCI Interrupt 0000:02:00.1[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 0.298205] NET: Registered protocol family 2 [ 0.298466] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.299095] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.299372] TCP bind hash table entries: 16384 (order: 5, 131072 bytes) [ 0.299640] TCP: Hash tables configured (established 16384 bind 16384) [ 0.299659] TCP reno registered [ 0.299845] NET: Registered protocol family 1 [ 0.300170] checking if image is initramfs...<7>Switched to high resolution mode on CPU 0 [ 1.437052] it is [ 2.643624] Freeing initrd memory: 7608k freed [ 2.643979] Simple Boot Flag at 0x35 set to 0x1 [ 2.644909] audit: initializing netlink socket (disabled) [ 2.644956] type=2000 audit(1227651963.644:1): initialized [ 2.645222] Total HugeTLB memory allocated, 0 [ 2.645407] VFS: Disk quotas dquot_6.5.1 [ 2.645500] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 2.645627] msgmni has been set to 1006 [ 2.645927] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 2.645954] io scheduler noop registered [ 2.645968] io scheduler anticipatory registered [ 2.645984] io scheduler deadline registered [ 2.646028] io scheduler cfq registered (default) [ 2.646177] pci 0000:01:00.0: Boot video device [ 2.646214] pci 0000:02:08.0: Firmware left e100 interrupts enabled; disabling [ 2.647137] vesafb: framebuffer at 0xe0000000, mapped to 0xe0880000, using 3072k, total 16320k [ 2.647166] vesafb: mode is 1024x768x16, linelength=2048, pages=9 [ 2.647184] vesafb: protected mode interface info at c000:5587 [ 2.647202] vesafb: pmi: set display start = c00c561b, set palette = c00c5667 [ 2.647220] vesafb: pmi: ports = 3010 3016 3054 3038 303c 305c 3000 3004 30b0 30b2 30b4 [ 2.647260] vesafb: scrolling: redraw [ 2.647276] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 [ 2.683534] Console: switching to colour frame buffer device 128x48 [ 2.719768] fb0: VESA VGA frame buffer device [ 2.720260] isapnp: Scanning for PnP cards... [ 3.030885] isapnp: No Plug & Play device found [ 3.037695] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 3.040450] serial 00:0a: activated [ 3.040908] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A [ 3.041661] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 3.042304] ACPI: PCI interrupt for device 0000:00:1f.6 disabled [ 3.046434] brd: module loaded [ 3.046897] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 3.053905] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 3.054261] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 3.054970] mice: PS/2 mouse device common for all mice [ 3.055638] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 [ 3.056975] rtc0: alarms up to one month, y3k [ 3.057379] cpuidle: using governor ladder [ 3.057680] cpuidle: using governor menu [ 3.057961] No iBFT detected. [ 3.059547] TCP cubic registered [ 3.059775] NET: Registered protocol family 17 [ 3.060072] Using IPI No-Shortcut mode [ 3.060072] registered taskstats version 1 [ 3.060721] rtc_cmos 00:06: setting system clock to 2008-11-25 22:26:04 UTC (1227651964) [ 3.075668] Freeing unused kernel memory: 244k freed [ 3.104011] input: AT Translated Set 2 keyboard as /class/input/input0 [ 3.495028] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 3.510413] ACPI: ACPI0007:00 is registered as cooling_device0 [ 3.526305] ACPI: Processor [CPU] (supports 8 throttling states) [ 3.548014] Marking TSC unstable due to: TSC halts in idle. [ 3.560065] ACPI: LNXTHERM:01 is registered as thermal_zone0 [ 3.583335] ACPI: Thermal Zone [THM0] (52 C) [ 4.571946] usbcore: registered new interface driver usbfs [ 4.587664] usbcore: registered new interface driver hub [ 4.624960] ACPI: ACPI Dock Station Driver [ 4.724017] usbcore: registered new device driver usb [ 4.864188] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11 [ 4.879289] ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11 [ 4.895306] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 4.895316] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 4.910838] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 4.930553] ehci_hcd 0000:00:1d.7: debug port 1 [ 4.945594] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 4.945614] ehci_hcd 0000:00:1d.7: irq 11, io mem 0xc0000000 [ 4.964015] USB Universal Host Controller Interface driver v3.0 [ 5.362462] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 5.377900] usb usb1: configuration #1 chosen from 1 choice [ 5.393798] hub 1-0:1.0: USB hub found [ 5.409197] hub 1-0:1.0: 6 ports detected [ 5.972123] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 5.987394] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.003395] usb usb1: Product: EHCI Host Controller [ 6.018716] usb usb1: Manufacturer: Linux 2.6.26-1-686 ehci_hcd [ 6.033864] usb usb1: SerialNumber: 0000:00:1d.7 [ 6.148915] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI [ 6.163912] e100: Copyright(c) 1999-2006 Intel Corporation [ 6.310596] Uniform Multi-Platform E-IDE driver [ 6.325426] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 6.469841] Floppy drive(s): fd0 is 1.44M [ 6.516017] ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 6.531657] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 6.531668] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 6.547723] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 6.563392] uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001800 [ 6.579139] usb usb2: configuration #1 chosen from 1 choice [ 6.594788] hub 2-0:1.0: USB hub found [ 6.610459] hub 2-0:1.0: 2 ports detected [ 6.639077] FDC 0 is a National Semiconductor PC87306 [ 6.749371] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 6.765592] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.781809] usb usb2: Product: UHCI Host Controller [ 6.798046] usb usb2: Manufacturer: Linux 2.6.26-1-686 uhci_hcd [ 6.814203] usb usb2: SerialNumber: 0000:00:1d.0 [ 6.835085] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 [ 6.851098] ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 [ 6.867225] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 6.867235] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 6.883191] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 6.899091] uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001820 [ 6.914753] usb usb3: configuration #1 chosen from 1 choice [ 6.930269] hub 3-0:1.0: USB hub found [ 6.944221] hub 3-0:1.0: 2 ports detected [ 7.060324] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 7.075744] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.091723] usb usb3: Product: UHCI Host Controller [ 7.107235] usb usb3: Manufacturer: Linux 2.6.26-1-686 uhci_hcd [ 7.122821] usb usb3: SerialNumber: 0000:00:1d.1 [ 7.140399] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 [ 7.155932] ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 7.171713] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 7.171723] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 7.187310] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 7.202675] uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001840 [ 7.218598] usb usb4: configuration #1 chosen from 1 choice [ 7.234349] hub 4-0:1.0: USB hub found [ 7.249860] hub 4-0:1.0: 2 ports detected [ 7.368721] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 7.384035] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.399666] usb usb4: Product: UHCI Host Controller [ 7.415122] usb usb4: Manufacturer: Linux 2.6.26-1-686 uhci_hcd [ 7.430517] usb usb4: SerialNumber: 0000:00:1d.2 [ 7.450184] ICH4: IDE controller (0x8086:0x24ca rev 0x01) at PCI slot 0000:00:1f.1 [ 7.465794] PIIX_IDE 0000:00:1f.1: enabling device (0005 -> 0007) [ 7.481444] ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 7.497524] ICH4: not 100% native mode: will probe irqs later [ 7.513432] ide0: BM-DMA at 0x1860-0x1867 [ 7.529253] ide1: BM-DMA at 0x1868-0x186f [ 7.544091] Probing IDE interface ide0... [ 7.840256] hda: IC25N040ATMR04-0, ATA DISK drive [ 8.525990] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [ 8.526188] hda: UDMA/100 mode selected [ 8.540217] Probing IDE interface ide1... [ 8.794227] Clocksource tsc unstable (delta = -160358946 ns) [ 9.108142] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 9.148457] ide1 at 0x170-0x177,0x376 on irq 15 [ 9.168776] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11 [ 9.183643] ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [LNKE] -> GSI 11 (level, low) -> IRQ 11 [ 9.224781] e100: eth0: e100_probe: addr 0xc0201000, irq 11, MAC addr 00:09:6b:bf:80:0c [ 9.240116] ACPI: PCI Interrupt 0000:02:00.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 9.308014] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[11] MMIO=[c0202000-c02027ff] Max Packet=[2048] IR/IT contexts=[4/4] [ 9.454295] SCSI subsystem initialized [ 9.662762] libata version 3.00 loaded. [ 9.828634] hda: max request size: 128KiB [ 9.846182] hda: Host Protected Area detected. [ 9.846188] current capacity is 71924725 sectors (36825 MB) [ 9.846192] native capacity is 78140160 sectors (40007 MB) [ 9.893980] hda: Host Protected Area disabled. [ 9.909737] hda: 78140160 sectors (40007 MB) w/1740KiB Cache, CHS=65535/16/63 [ 9.925766] hda: cache flushes supported [ 9.941325] hda: hda1 hda2 < hda5 > [ 10.215962] device-mapper: uevent: version 1.0.3 [ 10.236017] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com [ 10.652409] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00061b020120d504] [ 18.687859] PM: Starting manual resume from disk [ 18.857334] EXT3-fs: INFO: recovery required on readonly filesystem. [ 18.873820] EXT3-fs: write access will be enabled during recovery. [ 23.088228] kjournald starting. Commit interval 5 seconds [ 23.104824] EXT3-fs: dm-1: orphan cleanup on readonly fs [ 23.121264] ext3_orphan_cleanup: deleting unreferenced inode 584542 [ 23.121355] ext3_orphan_cleanup: deleting unreferenced inode 227174 [ 23.121373] ext3_orphan_cleanup: deleting unreferenced inode 227157 [ 23.121389] ext3_orphan_cleanup: deleting unreferenced inode 227156 [ 23.121403] ext3_orphan_cleanup: deleting unreferenced inode 227151 [ 23.121417] ext3_orphan_cleanup: deleting unreferenced inode 227149 [ 23.121431] ext3_orphan_cleanup: deleting unreferenced inode 227145 [ 23.121443] EXT3-fs: dm-1: 7 orphan inodes deleted [ 23.137564] EXT3-fs: recovery complete. [ 23.161598] EXT3-fs: mounted filesystem with ordered data mode. [ 28.021234] udevd version 125 started [ 29.582309] Non-volatile memory driver v1.2 [ 29.964484] thinkpad_acpi: ThinkPad ACPI Extras v0.20 [ 29.981241] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 29.997625] thinkpad_acpi: ThinkPad BIOS 1QET97WW (3.02 ), EC 1QHT13WW-1.01 [ 30.013986] thinkpad_acpi: IBM ThinkPad X31, model 2672C2U [ 30.401973] Registered led device: tpacpi::thinklight [ 30.417978] Registered led device: tpacpi::power [ 30.433588] Registered led device: tpacpi:orange:batt [ 30.449391] Registered led device: tpacpi:green:batt [ 30.464600] Registered led device: tpacpi::dock_active [ 30.479961] Registered led device: tpacpi::bay_active [ 30.495002] Registered led device: tpacpi::dock_batt [ 30.510014] Registered led device: tpacpi::unknown_led [ 30.524572] Registered led device: tpacpi::standby [ 31.760341] Linux agpgart interface v0.103 [ 31.804015] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 32.116074] agpgart: Detected an Intel 855PM Chipset. [ 32.146129] agpgart: AGP aperture is 256M @ 0xd0000000 [ 32.177929] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 32.557506] ACPI: EC: missing confirmations, switch off interrupt mode. [ 32.606691] intel_rng: FWH not detected [ 33.128224] input: ThinkPad Extra Buttons as /class/input/input1 [ 33.146970] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008) [ 33.160169] iTCO_wdt: Found a ICH4-M TCO device (Version=1, TCOBASE=0x1060) [ 33.175196] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 33.239852] ACPI: PCI Interrupt 0000:00:1f.3[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 33.312343] input: Power Button (FF) as /class/input/input2 [ 33.416301] input: PC Speaker as /class/input/input3 [ 33.623585] ACPI: Power Button (FF) [PWRF] [ 33.637771] input: Lid Switch as /class/input/input4 [ 34.084469] ACPI: Lid Switch [LID] [ 34.098547] input: Sleep Button (CM) as /class/input/input5 [ 34.393002] IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 34.426820] input: TPPS/2 IBM TrackPoint as /class/input/input6 [ 34.691733] ACPI: Sleep Button (CM) [SLPB] [ 35.173880] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 35.188391] PCI: Setting latency timer of device 0000:00:1f.6 to 64 [ 36.020360] ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 36.034671] PCI: Setting latency timer of device 0000:00:1f.5 to 64 [ 37.032062] intel8x0_measure_ac97_clock: measured 55307 usecs [ 37.046328] intel8x0: clocking to 48000 [ 37.420149] input: Video Bus as /class/input/input7 [ 37.504016] ACPI: AC Adapter [AC] (off-line) [ 37.634663] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 37.821450] ACPI: \_SB_.PCI0.IDE0.SCND.MSTR: found ejectable bay [ 37.821468] ACPI: \_SB_.PCI0.IDE0.SCND.MSTR: Adding notify handler [ 37.821534] ACPI: Error installing bay notify handler [ 38.532000] Yenta: CardBus bridge found at 0000:02:00.0 [1014:0532] [ 38.568485] ieee80211_crypt: registered algorithm 'NULL' [ 38.580487] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 38.594959] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com> [ 38.776668] Yenta: ISA IRQ mask 0x04b8, PCI irq 11 [ 38.791293] Socket status: 30000006 [ 38.807249] pcmcia: parent PCI bridge I/O window: 0x4000 - 0x8fff [ 38.821440] cs: IO port probe 0x4000-0x8fff: clean. [ 38.840031] pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xcfffffff [ 38.853282] pcmcia: parent PCI bridge Memory window: 0xe8000000 - 0xefffffff [ 38.959522] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq [ 38.973930] ipw2200: Copyright(c) 2003-2006 Intel Corporation [ 39.068668] parport_pc 00:0b: reported by Plug and Play ACPI [ 39.083492] parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE] [ 39.206766] NET: Registered protocol family 23 [ 39.387801] nsc-ircc 00:0c: activated [ 39.403217] nsc-ircc, chip->init [ 39.418974] nsc-ircc, Found chip at base=0x02e [ 39.434368] nsc-ircc, driver loaded (Dag Brattli) [ 39.450601] IrDA: Registered device irda0 [ 39.466055] nsc-ircc, Found dongle: HP HSDL-1100/HSDL-2100 [ 39.656595] Yenta: CardBus bridge found at 0000:02:00.1 [1014:0532] [ 39.904647] Yenta: ISA IRQ mask 0x0438, PCI irq 11 [ 39.920270] Socket status: 30000006 [ 39.935615] pcmcia: parent PCI bridge I/O window: 0x4000 - 0x8fff [ 39.951611] cs: IO port probe 0x4000-0x8fff: clean. [ 39.972028] pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xcfffffff [ 39.987563] pcmcia: parent PCI bridge Memory window: 0xe8000000 - 0xefffffff [ 40.344621] ACPI: Battery Slot [BAT0] (battery present) [ 40.607494] ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 40.623249] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection [ 40.639217] firmware: requesting ipw2200-bss.fw [ 42.346630] ipw2200: Detected geography ZZD (13 802.11bg channels, 0 802.11a channels) [ 42.615160] cs: IO port probe 0x100-0x3af: clean. [ 42.640015] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [ 42.657140] cs: IO port probe 0x100-0x3af: clean. [ 42.672114] cs: IO port probe 0x820-0x8ff: clean. [ 42.688286] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [ 42.704272] cs: IO port probe 0xc00-0xcf7: clean. [ 42.719817] cs: IO port probe 0x820-0x8ff: clean. [ 42.735057] cs: IO port probe 0xa00-0xaff: clean. [ 42.749802] cs: IO port probe 0xc00-0xcf7: clean. [ 42.767537] cs: IO port probe 0xa00-0xaff: clean. [ 44.591557] EXT3 FS on dm-1, internal journal [ 45.561577] loop: module loaded [ 46.143016] fuse init (API version 7.9) [ 46.188117] ACPI: \_SB_.PCI0.IDE0.SCND.MSTR: found ejectable bay [ 46.188134] ACPI: \_SB_.PCI0.IDE0.SCND.MSTR: Adding notify handler [ 46.188210] ACPI: Error installing bay notify handler [ 48.584181] kjournald starting. Commit interval 5 seconds [ 48.597853] EXT3 FS on hda1, internal journal [ 48.611519] EXT3-fs: recovery complete. [ 48.627714] EXT3-fs: mounted filesystem with ordered data mode. [ 58.071999] kjournald starting. Commit interval 5 seconds [ 58.089318] EXT3 FS on dm-3, internal journal [ 58.102992] EXT3-fs: recovery complete. [ 58.119817] EXT3-fs: mounted filesystem with ordered data mode. [ 58.526549] Adding 1380344k swap on /dev/mapper/mumia-swap_1. Priority:-1 extents:1 across:1380344k [ 63.384573] NET: Registered protocol family 10 [ 63.400000] lo: Disabled Privacy Extensions [ 63.416155] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 74.388025] eth1: no IPv6 routers present [ 88.633625] lp0: using parport0 (interrupt-driven). [ 88.700349] ppdev: user-space parallel port driver [ 95.108099] thinkpad_acpi: setting the hotkey mask to 0x00ffffff is likely not the best way to go about it [ 95.124256] thinkpad_acpi: please consider using the driver defaults, and refer to up-to-date thinkpad-acpi documentation [ 95.256831] input: /usr/sbin/thinkpad-keys as /class/input/input8 [ 116.032089] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use) [ 126.221492] [drm] Initialized drm 1.1.0 20060810 [ 126.296546] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 126.297055] [drm] Initialized radeon 1.29.0 20080528 on minor 0 [ 128.272746] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0. [ 128.272784] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode [ 128.272841] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode [ 129.688996] [drm] Setting GART location based on new memory map [ 129.688996] [drm] Loading R100 Microcode [ 129.688996] [drm] writeback test succeeded in 2 usecs 00:00.0 Host bridge: Intel Corporation 82855PM Processor to I/O Controller (rev 03) 00:01.0 PCI bridge: Intel Corporation 82855PM Processor to AGP Controller (rev 03) 00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 01) 00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 01) 00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 01) 00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 01) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 81) 00:1f.0 ISA bridge: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge (rev 01) 00:1f.1 IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE Controller (rev 01) 00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 01) 00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 01) 00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 01) 01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility M6 LY 02:00.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev aa) 02:00.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev aa) 02:00.2 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller (rev 02) 02:02.0 Network controller: Intel Corporation PRO/Wireless 2200BG [Calexico2] Network Connection (rev 05) 02:08.0 Ethernet controller: Intel Corporation 82801DB PRO/100 VE (MOB) Ethernet Controller (rev 81) Thanks for any feedback... A. ----- End forwarded message ----- -- The idea that Bill Gates has appeared like a knight in shining armour to lead all customers out of a mire of technological chaos neatly ignores the fact that it was he who, by peddling second-rate technology, led them into it in the first place. - Douglas Adams (1952-2001)
Attachment:
signature.asc
Description: Digital signature