Bug#512504: LVM with Megaraid not detected due to wrong module load order
Package: linux-image-2.6.24-1-686
Version: 2.6.24-7
Severity: important
After installing lenny with netinstall beta2 to a megaraid (dell pe6600)
disk array using debians default LVM partition type the system is unusable
after bootup.
I think the error is in the load order of the modules: LVM volumes are
checked before the scsi driver for megaraid is loaded.
-- Package-specific info:
** Version:
Linux version 2.6.24-1-686 (Debian 2.6.24-7) (dannf@debian.org) (gcc version 4.1.3 20080114 (prerelease) (Debian 4.1.2-19)) #1 SMP Thu May 8 02:16:39 UTC 2008
** Command line:
root=/dev/sda1 ro quiet
** Not tainted
** Kernel log:
0000:00:05.1: ttyS1 at I/O 0xe880 (irq = 16) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
registered taskstats version 1
Freeing unused kernel memory: 248k freed
input: AT Translated Set 2 keyboard as /class/input/input0
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SvrWks CSB5: IDE controller (0x1166:0x0212 rev 0x93) at PCI slot 0000:00:0f.1
SvrWks CSB5: not 100% native mode: will probe irqs later
SvrWks CSB5: simplex device: DMA forced
ide0: BM-DMA at 0x08b0-0x08b7, BIOS settings: hda:DMA, hdb:pio
SvrWks CSB5: simplex device: DMA forced
ide1: BM-DMA at 0x08b8-0x08bf, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
Floppy drive(s): fd0 is 1.44M
SCSI subsystem initialized
FDC 0 is a National Semiconductor PC87306
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
hda: HL-DT-STDVD-ROM GDR8081N, ATAPI CD/DVD-ROM drive
hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/33 mode selected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
tg3.c:v3.86 (November 9, 2007)
qla1280: Skipping AMI SubSys Vendor ID Chip
ACPI: PCI Interrupt 0000:0a:01.0[A] -> GSI 17 (level, low) -> IRQ 17
megaraid: probe new device 0x101e:0x1960:0x1028:0x0493: bus 5:slot 0:func 0
ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 21 (level, low) -> IRQ 18
megaraid: fw version:[1.80] bios version:[3.29]
scsi0 : LSI Logic MegaRAID driver
scsi[0]: scanning scsi channel 0 [Phy 0] for non-raid devices
scsi 0:0:6:0: Processor PE/PV 1x8 SCSI BP 1.1 PQ: 0 ANSI: 2
eth0: Tigon3 [partno(BCM95700A6) rev 7104 PHY(5411)] (PCI:66MHz:64-bit) 10/100/1000Base-T Ethernet 00:06:5b:f4:9d:13
eth0: RXcsums[1] LinkChgREG[1] MIirq[1] ASF[0] WireSpeed[0] TSOcap[0]
eth0: dma_rwctrl[76ff000f] dma_mask[64-bit]
ACPI: PCI Interrupt 0000:0a:02.0[A] -> GSI 18 (level, low) -> IRQ 19
eth1: Tigon3 [partno(BCM95700A6) rev 7104 PHY(5411)] (PCI:66MHz:64-bit) 10/100/1000Base-T Ethernet 00:06:5b:f4:9d:14
eth1: RXcsums[1] LinkChgREG[1] MIirq[1] ASF[0] WireSpeed[0] TSOcap[0]
eth1: dma_rwctrl[76ff000f] dma_mask[64-bit]
scsi[0]: scanning scsi channel 1 [Phy 1] for non-raid devices
libata version 3.00 loaded.
hda: ATAPI 24X DVD-ROM drive, 512kB Cache
Uniform CD-ROM driver Revision: 3.20
scsi[0]: scanning scsi channel 2 [virtual] for logical drives
scsi 0:2:0:0: Direct-Access MegaRAID LD 0 RAID5 349G 1.80 PQ: 0 ANSI: 2
Driver 'sd' needs updating - please use bus_type methods
sd 0:2:0:0: [sda] 715550720 512-byte hardware sectors (366362 MB)
sd 0:2:0:0: [sda] Write Protect is off
sd 0:2:0:0: [sda] Mode Sense: 00 00 00 00
sd 0:2:0:0: [sda] Asking for cache data failed
sd 0:2:0:0: [sda] Assuming drive cache: write through
sd 0:2:0:0: [sda] 715550720 512-byte hardware sectors (366362 MB)
sd 0:2:0:0: [sda] Write Protect is off
sd 0:2:0:0: [sda] Mode Sense: 00 00 00 00
sd 0:2:0:0: [sda] Asking for cache data failed
sd 0:2:0:0: [sda] Assuming drive cache: write through
sda: sda1 sda2 <<5>scsi 0:0:6:0: Attached scsi generic sg0 type 3
sd 0:2:0:0: Attached scsi generic sg1 type 0
sda5 sda6 >
sd 0:2:0:0: [sda] Attached SCSI disk
Attempting manual resume
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
input: PC Speaker as /class/input/input1
Linux agpgart interface v0.102
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
piix4_smbus 0000:00:0f.0: Found 0000:00:0f.0 device
piix4_smbus 0000:00:0f.0: Host SMBus controller not enabled!
Real Time Clock Driver v1.12ac
input: Power Button (FF) as /class/input/input2
ACPI: Power Button (FF) [PWRF]
input: ImPS/2 Generic Wheel Mouse as /class/input/input3
Adding 2650684k swap on /dev/sda5. Priority:-1 extents:1 across:2650684k
EXT3 FS on sda1, internal journal
loop: module loaded
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
No dock devices found.
tg3: eth0: Link is up at 100 Mbps, full duplex.
tg3: eth0: Flow control is on for TX and on for RX.
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
eth0: no IPv6 routers present
atkbd.c: Unknown key pressed (translated set 2, code 0x0 on isa0060/serio0).
atkbd.c: Use 'setkeycodes 00 <keycode>' to make it known.
atkbd.c: Unknown key pressed (translated set 2, code 0x0 on isa0060/serio0).
atkbd.c: Use 'setkeycodes 00 <keycode>' to make it known.
** Loaded modules:
Module Size Used by
ipv6 240836 28
container 4864 0
battery 13572 0
ac 6116 0
sbs 14376 0
sbshc 6848 1 sbs
dock 10384 0
video 18672 0
output 3744 1 video
loop 16804 0
psmouse 36464 0
button 8432 0
serio_raw 6660 0
rtc 13052 0
i2c_piix4 8428 0
shpchp 31028 0
pci_hotplug 27712 1 shpchp
sworks_agp 9440 0
agpgart 31688 1 sworks_agp
i2c_core 22432 1 i2c_piix4
pcspkr 3200 0
evdev 11104 0
ext3 122920 2
jbd 43732 1 ext3
mbcache 8288 1 ext3
sg 33264 0
sd_mod 27200 4
ide_cd 36224 0
cdrom 32512 1 ide_cd
ata_generic 7428 0
libata 144624 1 ata_generic
generic 4388 0 [permanent]
megaraid_mbox 30256 3
megaraid_mm 10464 1 megaraid_mbox
qla1280 115884 0
scsi_mod 141164 5 sg,sd_mod,libata,megaraid_mbox,qla1280
floppy 54628 0
tg3 88996 0
serverworks 5796 0 [permanent]
ide_core 108292 3 ide_cd,generic,serverworks
thermal 16028 0
processor 36552 1 thermal
fan 4772 0
** PCI devices:
00:00.0 Host bridge [0600]: Broadcom CMIC-HE [1166:0011] (rev 22)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel modules: sworks-agp
00:00.1 Host bridge [0600]: Broadcom CMIC-HE [1166:0011]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel modules: sworks-agp
00:00.2 Host bridge [0600]: Broadcom CMIC-HE [1166:0011]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel modules: sworks-agp
00:00.3 Host bridge [0600]: Broadcom CMIC-HE [1166:0011]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel modules: sworks-agp
00:04.0 VGA compatible controller [0300]: ATI Technologies Inc Rage XL [1002:4752] (rev 27) (prog-if 00 [VGA controller])
Subsystem: Dell Device [1028:0109]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr- Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (2000ns min), Cache Line Size: 64 bytes
Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
Region 1: I/O ports at ec00 [size=256]
Region 2: Memory at fe101000 (32-bit, non-prefetchable) [size=4K]
[virtual] Expansion ROM at e0000000 [disabled] [size=128K]
Capabilities: [5c] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:05.0 Class [ff00]: Dell Remote Access Card III [1028:0007]
Subsystem: Dell Remote Access Card III [1028:0007]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at feb80000 (32-bit, prefetchable) [size=4K]
Region 1: I/O ports at e8f8 [size=8]
Region 2: I/O ports at e8e8 [size=8]
Expansion ROM at fe000000 [disabled] [size=64K]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:05.1 Class [ff00]: Dell Remote Access Card III [1028:0008]
Subsystem: Dell Remote Access Card III [1028:0008]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 16
Region 0: Memory at fe100000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at e880 [size=64]
Region 2: Memory at feb00000 (32-bit, prefetchable) [size=512K]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: serial
00:05.2 Class [ff00]: Dell Remote Access Card III: BMC/SMIC device not present [1028:0009]
Subsystem: Dell Remote Access Card III: BMC/SMIC device not present [1028:0009]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 7
Region 0: I/O ports at e8f4 [size=4]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0f.0 Host bridge [0600]: Broadcom CSB5 South Bridge [1166:0201] (rev 93)
Subsystem: Broadcom CSB5 South Bridge [1166:0201]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 64
Kernel modules: sworks-agp, i2c-piix4
00:0f.1 IDE interface [0101]: Broadcom CSB5 IDE Controller [1166:0212] (rev 93) (prog-if 82 [Master PriP])
Subsystem: Broadcom CSB5 IDE Controller [1166:0212]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 08b0 [size=16]
Kernel driver in use: Serverworks_IDE
Kernel modules: serverworks
00:0f.3 ISA bridge [0601]: Broadcom CSB5 LPC bridge [1166:0225]
Subsystem: Broadcom Device [1166:0230]
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:10.0 Host bridge [0600]: Broadcom CIOB30 [1166:0010] (rev 03)
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Capabilities: [60] PCI-X non-bridge device
Command: DPERE- ERO- RBC=512 OST=8
Status: Dev=00:00.0 64bit+ 133MHz+ SCD- USC- DC=bridge DMMRBC=512 DMOST=8 DMCRS=8 RSCEM- 266MHz- 533MHz-
Kernel modules: sworks-agp
00:10.2 Host bridge [0600]: Broadcom CIOB30 [1166:0010] (rev 03)
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Capabilities: [60] PCI-X non-bridge device
Command: DPERE- ERO- RBC=512 OST=8
Status: Dev=00:00.0 64bit+ 133MHz+ SCD- USC- DC=bridge DMMRBC=512 DMOST=8 DMCRS=8 RSCEM- 266MHz- 533MHz-
Kernel modules: sworks-agp
00:11.0 Host bridge [0600]: Broadcom CIOB30 [1166:0010] (rev 03)
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Capabilities: [60] PCI-X non-bridge device
Command: DPERE- ERO- RBC=512 OST=8
Status: Dev=00:00.0 64bit+ 133MHz+ SCD- USC- DC=bridge DMMRBC=512 DMOST=8 DMCRS=8 RSCEM- 266MHz- 533MHz-
Kernel modules: sworks-agp
00:11.2 Host bridge [0600]: Broadcom CIOB30 [1166:0010] (rev 03)
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Capabilities: [60] PCI-X non-bridge device
Command: DPERE- ERO- RBC=512 OST=8
Status: Dev=00:00.0 64bit+ 133MHz+ SCD- USC- DC=bridge DMMRBC=512 DMOST=8 DMCRS=8 RSCEM- 266MHz- 533MHz-
Kernel modules: sworks-agp
00:12.0 Host bridge [0600]: Broadcom CIOB30 [1166:0010] (rev 03)
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Capabilities: [60] PCI-X non-bridge device
Command: DPERE- ERO- RBC=512 OST=8
Status: Dev=00:00.0 64bit+ 133MHz+ SCD- USC- DC=bridge DMMRBC=512 DMOST=8 DMCRS=8 RSCEM- 266MHz- 533MHz-
Kernel modules: sworks-agp
00:12.2 Host bridge [0600]: Broadcom CIOB30 [1166:0010] (rev 03)
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Capabilities: [60] PCI-X non-bridge device
Command: DPERE- ERO- RBC=512 OST=8
Status: Dev=00:00.0 64bit+ 133MHz+ SCD- USC- DC=bridge DMMRBC=512 DMOST=8 DMCRS=8 RSCEM- 266MHz- 533MHz-
Kernel modules: sworks-agp
03:01.0 PCI bridge [0604]: Intel Corporation 21154 PCI-to-PCI Bridge [8086:b154] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Bus: primary=03, secondary=04, subordinate=05, sec-latency=32
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fcd00000-fcffffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f7ffffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Bridge: PM- B3+
Kernel modules: shpchp
04:00.0 PCI bridge [0604]: Intel Corporation 21154 PCI-to-PCI Bridge [8086:b154] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Bus: primary=04, secondary=05, subordinate=05, sec-latency=32
Memory behind bridge: fcf00000-fcffffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f7ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Bridge: PM- B3+
Kernel modules: shpchp
04:01.0 SCSI storage controller [0100]: QLogic Corp. ISP12160 Dual Channel Ultra3 SCSI Processor [1077:1216] (rev 06)
Subsystem: American Megatrends Inc. QLA12160 on AMI MegaRAID [101e:8493]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (16000ns min), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 5
Region 0: I/O ports at dc00 [size=256]
Region 1: Memory at fcdff000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at fce00000 [disabled] [size=128K]
Capabilities: [44] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel modules: qla1280
05:00.0 RAID bus controller [0104]: American Megatrends Inc. MegaRAID [101e:1960] (rev 20)
Subsystem: Dell PowerEdge RAID Controller 3/DC [1028:0493]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
Expansion ROM at fcf00000 [disabled] [size=32K]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: megaraid
Kernel modules: megaraid_mbox
0a:01.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5700 Gigabit Ethernet [14e4:1644] (rev 14)
Subsystem: Dell Broadcom BCM5700 1000Base-T [1028:0109]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (16000ns min), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at eff10000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [40] PCI-X non-bridge device
Command: DPERE- ERO- RBC=512 OST=1
Status: Dev=ff:1f.1 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC=512 DMOST=1 DMCRS=8 RSCEM- 266MHz- 533MHz-
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [50] Vital Product Data <?>
Capabilities: [58] Message Signalled Interrupts: Mask- 64bit+ Queue=0/3 Enable-
Address: ab882576feb438f0 Data: 60c1
Kernel driver in use: tg3
Kernel modules: tg3
0a:02.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5700 Gigabit Ethernet [14e4:1644] (rev 14)
Subsystem: Dell Broadcom BCM5700 1000Base-T [1028:0109]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (16000ns min), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at eff00000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [40] PCI-X non-bridge device
Command: DPERE- ERO+ RBC=512 OST=1
Status: Dev=ff:1f.1 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC=512 DMOST=1 DMCRS=8 RSCEM- 266MHz- 533MHz-
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [50] Vital Product Data <?>
Capabilities: [58] Message Signalled Interrupts: Mask- 64bit+ Queue=0/3 Enable-
Address: 8d22986a92542df4 Data: b3b8
Kernel driver in use: tg3
Kernel modules: tg3
-- System Information:
Debian Release: 5.0
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.24-1-686 (SMP w/8 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) (ignored: LC_ALL set to de_CH.UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.24-1-686 depends on:
ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92a tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.24-1-686 recommends:
pn libc6-i686 <none> (no description available)
Versions of packages linux-image-2.6.24-1-686 suggests:
ii grub 0.97-47lenny1 GRand Unified Bootloader (Legacy v
pn linux-doc-2.6.24 <none> (no description available)
-- debconf information:
linux-image-2.6.24-1-686/preinst/bootloader-initrd-2.6.24-1-686: true
linux-image-2.6.24-1-686/postinst/old-initrd-link-2.6.24-1-686: true
linux-image-2.6.24-1-686/preinst/lilo-has-ramdisk:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.24-1-686/postinst/old-dir-initrd-link-2.6.24-1-686: true
linux-image-2.6.24-1-686/preinst/overwriting-modules-2.6.24-1-686: true
linux-image-2.6.24-1-686/preinst/abort-install-2.6.24-1-686:
linux-image-2.6.24-1-686/postinst/bootloader-error-2.6.24-1-686:
linux-image-2.6.24-1-686/prerm/removing-running-kernel-2.6.24-1-686: true
linux-image-2.6.24-1-686/postinst/create-kimage-link-2.6.24-1-686: true
linux-image-2.6.24-1-686/postinst/old-system-map-link-2.6.24-1-686: true
linux-image-2.6.24-1-686/prerm/would-invalidate-boot-loader-2.6.24-1-686: true
linux-image-2.6.24-1-686/postinst/depmod-error-2.6.24-1-686: false
linux-image-2.6.24-1-686/preinst/initrd-2.6.24-1-686:
linux-image-2.6.24-1-686/preinst/abort-overwrite-2.6.24-1-686:
linux-image-2.6.24-1-686/preinst/failed-to-move-modules-2.6.24-1-686:
linux-image-2.6.24-1-686/postinst/depmod-error-initrd-2.6.24-1-686: false
linux-image-2.6.24-1-686/preinst/elilo-initrd-2.6.24-1-686: true
linux-image-2.6.24-1-686/postinst/bootloader-test-error-2.6.24-1-686:
linux-image-2.6.24-1-686/postinst/kimage-is-a-directory:
linux-image-2.6.24-1-686/preinst/lilo-initrd-2.6.24-1-686: true
Reply to: