--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-2.6.25-2-686: "Disabling IRQ #19" after a while
- From: Roger <roger@jikos.cz>
- Date: Wed, 09 Jul 2008 10:32:49 +0200
- Message-id: <20080709083249.3709.39860.reportbug@hp>
Package: linux-image-2.6.25-2-686
Version: 2.6.25-6
Severity: normal
Using HP notebook 6910p, after boot, when I leave it a while sitting in console (I've turned kdm off), I get following message on current console and in logs:
Jul 9 09:02:39 hp kernel: [ 886.948488] irq 19: nobody cared (try booting with the "irqpoll" option)
Jul 9 09:02:39 hp kernel: [ 886.948488] Pid: 0, comm: swapper Not tainted 2.6.25-2-686 #1
Jul 9 09:02:39 hp kernel: [ 886.948488] [<c015458b>] __report_bad_irq+0x24/0x69
Jul 9 09:02:39 hp kernel: [ 886.948488] [<c0154592>] __report_bad_irq+0x2b/0x69
Jul 9 09:02:39 hp kernel: [ 886.948488] [<c01547a4>] note_interrupt+0x1d4/0x20c
Jul 9 09:02:39 hp kernel: [ 886.948488] [<c0153d8e>] handle_IRQ_event+0x23/0x51
Jul 9 09:02:39 hp kernel: [ 886.948488] [<c0154e69>] handle_fasteoi_irq+0x85/0xa4
Jul 9 09:02:39 hp kernel: [ 886.948488] [<c0109f16>] do_IRQ+0x4d/0x63
Jul 9 09:02:39 hp kernel: [ 886.948488] [<c0108257>] common_interrupt+0x23/0x28
Jul 9 09:02:39 hp kernel: [ 886.948488] [<c01500d8>] audit_filter_rules+0x318/0x6b4
Jul 9 09:02:39 hp kernel: [ 886.948488] [<f8852062>] acpi_idle_enter_bm+0x2a9/0x317 [processor]
Jul 9 09:02:39 hp kernel: [ 886.948488] [<c0246e46>] cpuidle_idle_call+0x5b/0x89
Jul 9 09:02:39 hp kernel: [ 886.948488] [<c0246deb>] cpuidle_idle_call+0x0/0x89
Jul 9 09:02:39 hp kernel: [ 886.948488] [<c01065c9>] cpu_idle+0xa1/0xc1
Jul 9 09:02:39 hp kernel: [ 886.948488] =======================
Jul 9 09:02:39 hp kernel: [ 886.948488] handlers:
Jul 9 09:02:39 hp kernel: [ 886.948488] [<f89f6440>] (yenta_interrupt+0x0/0xb3 [yenta_socket])
Jul 9 09:02:39 hp kernel: [ 886.948488] [<f8af58b7>] (sdhci_irq+0x0/0x4d5 [sdhci])
Jul 9 09:02:39 hp kernel: [ 886.948488] Disabling IRQ #19
I'm not sure how important this is, I don't use PCMCIA and I don't know if it breaks anything else (I get kernel panic with hard lock after a while, but with different error message and it probably isn't related to this).
-- Package-specific info:
** Version:
Linux version 2.6.25-2-686 (Debian 2.6.25-6) (maks@debian.org) (gcc version 4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 SMP Fri Jun 27 03:23:20 UTC 2008
** Command line:
root=/dev/sda5 ro
** Not tainted
** Kernel log:
[ 8.985176] iwl4965: Copyright(c) 2003-2007 Intel Corporation
[ 9.072037] ACPI: PCI Interrupt 0000:10:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 9.072037] PCI: Setting latency timer of device 0000:10:00.0 to 64
[ 9.072037] iwl4965: Detected Intel Wireless WiFi Link 4965AGN
[ 9.117431] iwl4965: Tunable channels: 13 802.11bg, 19 802.11a channels
[ 9.329532] phy0: Selected rate control algorithm 'iwl-4965-rs'
[ 9.141467] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x2580b1, caps: 0xa04793/0x300000
[ 9.141541] serio: Synaptics pass-through port at isa0060/serio4/input0
[ 9.394729] input: SynPS/2 Synaptics TouchPad as /class/input/input6
[ 9.398352] parport_pc 00:03: reported by Plug and Play ACPI
[ 9.186177] found SMC SuperIO Chip (devid=0x7a rev=03 base=0x004e): LPC47N227
[ 9.186201] smsc_superio_flat(): fir: 0x100, sir: 0x3e8, dma: 03, irq: 6, mode: 0x0e
[ 9.186204] smsc_ircc_present: can't get sir_base of 0x3e8
[ 9.398352] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[ 9.403547] ACPI: PCI interrupt for device 0000:10:00.0 disabled
[ 9.517823] pccard: PCMCIA card inserted into slot 1
[ 9.639872] cs: memory probe 0xe4100000-0xe43fffff: excluding 0xe4100000-0xe412ffff
[ 9.645114] pcmcia: registering new device pcmcia1.0
[ 9.478266] cs: IO port probe 0x100-0x3af: excluding 0x100-0x107
[ 9.480667] cs: IO port probe 0x3e0-0x4ff: clean.
[ 9.481655] cs: IO port probe 0x820-0x8ff: clean.
[ 9.482500] cs: IO port probe 0xc00-0xcf7: clean.
[ 9.483464] cs: IO port probe 0xa00-0xaff: clean.
[ 9.484690] cs: IO port probe 0x100-0x3af: excluding 0x100-0x107
[ 9.487029] cs: IO port probe 0x3e0-0x4ff: clean.
[ 9.488017] cs: IO port probe 0x820-0x8ff: clean.
[ 9.488869] cs: IO port probe 0xc00-0xcf7: clean.
[ 9.489855] cs: IO port probe 0xa00-0xaff: clean.
[ 9.539476] Probing IDE interface ide1...
[ 10.197707] Probing IDE interface ide1...
[ 10.856844] Probing IDE interface ide1...
[ 11.512976] Probing IDE interface ide1...
[ 12.170640] Probing IDE interface ide1...
[ 12.839148] Probing IDE interface ide1...
[ 13.495964] Probing IDE interface ide1...
[ 13.814231] input: PS/2 Generic Mouse as /class/input/input7
[ 14.156101] Probing IDE interface ide1...
[ 14.825385] Probing IDE interface ide1...
[ 15.493640] Probing IDE interface ide1...
[ 16.161762] ide-cs: ide_register() at 0x5100 & 0x510e, irq 19 failed
[ 16.393447] Probing IDE interface ide1...
[ 17.061656] Probing IDE interface ide1...
[ 17.729060] Probing IDE interface ide1...
[ 18.397511] Probing IDE interface ide1...
[ 19.067544] Probing IDE interface ide1...
[ 19.734965] Probing IDE interface ide1...
[ 20.403988] Probing IDE interface ide1...
[ 21.073965] Probing IDE interface ide1...
[ 21.742095] Probing IDE interface ide1...
[ 22.410586] Probing IDE interface ide1...
[ 23.080521] ide-cs: ide_register() at 0x5100 & 0x510e, irq 19 failed
[ 23.850919] Adding 1726948k swap on /dev/sda6. Priority:-1 extents:1 across:1726948k
[ 24.096930] EXT3 FS on sda5, internal journal
[ 24.492944] loop: module loaded
[ 24.561350] fuse init (API version 7.9)
[ 28.248129] NET: Registered protocol family 10
[ 28.248641] lo: Disabled Privacy Extensions
[ 28.249127] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 32.778724] Bluetooth: L2CAP ver 2.9
[ 32.778805] Bluetooth: L2CAP socket layer initialized
[ 32.794750] Bluetooth: RFCOMM socket layer initialized
[ 32.794843] Bluetooth: RFCOMM TTY layer initialized
[ 32.794919] Bluetooth: RFCOMM ver 1.8
[ 36.812628] [drm] Initialized drm 1.1.0 20060810
[ 36.991178] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 36.991189] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 36.991274] [drm] Initialized i915 1.6.0 20060119 on minor 0
[ 1001.647355] irq 19: nobody cared (try booting with the "irqpoll" option)
[ 1001.647355] Pid: 0, comm: swapper Not tainted 2.6.25-2-686 #1
[ 1001.647355] [<c015458b>] __report_bad_irq+0x24/0x69
[ 1001.647355] [<c0154592>] __report_bad_irq+0x2b/0x69
[ 1001.647355] [<c01547a4>] note_interrupt+0x1d4/0x20c
[ 1001.647355] [<c0153d8e>] handle_IRQ_event+0x23/0x51
[ 1001.647355] [<c0154e69>] handle_fasteoi_irq+0x85/0xa4
[ 1001.647355] [<c0109f16>] do_IRQ+0x4d/0x63
[ 1001.647355] [<c0108257>] common_interrupt+0x23/0x28
[ 1001.647355] [<c01500d8>] audit_filter_rules+0x318/0x6b4
[ 1001.647355] [<f8852062>] acpi_idle_enter_bm+0x2a9/0x317 [processor]
[ 1001.647355] [<c0246e46>] cpuidle_idle_call+0x5b/0x89
[ 1001.647355] [<c0246deb>] cpuidle_idle_call+0x0/0x89
[ 1001.647355] [<c01065c9>] cpu_idle+0xa1/0xc1
[ 1001.647355] =======================
[ 1001.647355] handlers:
[ 1001.647355] [<f89eb440>] (yenta_interrupt+0x0/0xb3 [yenta_socket])
[ 1001.647355] [<f8b818b7>] (sdhci_irq+0x0/0x4d5 [sdhci])
[ 1001.647355] Disabling IRQ #19
[ 3481.784892] ACPI: PCI Interrupt 0000:10:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 3481.784892] PM: Writing back config space on device 0000:10:00.0 at offset 1 (was 100002, writing 100006)
[ 3482.052955] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 3486.161214] wlan0: Initial auth_alg=0
[ 3486.161214] wlan0: authenticate with AP 00:4f:62:0c:7a:72
[ 3485.181613] wlan0: RX authentication from 00:4f:62:0c:7a:72 (alg=0 transaction=2 status=0)
[ 3485.181613] wlan0: authenticated
[ 3485.181613] wlan0: associate with AP 00:4f:62:0c:7a:72
[ 3485.191243] wlan0: RX AssocResp from 00:4f:62:0c:7a:72 (capab=0x411 status=0 aid=2)
[ 3485.191243] wlan0: associated
[ 3485.191243] wlan0: switched to short barker preamble (BSSID=00:4f:62:0c:7a:72)
[ 3485.191243] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 3485.220657] wlan0: switched to long barker preamble (BSSID=00:4f:62:0c:7a:72)
[ 3488.231857] padlock: VIA PadLock not detected.
** Loaded modules:
Module Size Used by
aes_i586 8256 2
aes_generic 29160 1 aes_i586
i915 27648 0
drm 72280 1 i915
rfcomm 36368 0
l2cap 22784 5 rfcomm
ipv6 241956 14
acpi_cpufreq 9260 2
cpufreq_userspace 3812 0
cpufreq_conservative 7432 0
cpufreq_stats 5216 0
cpufreq_ondemand 8428 1
freq_table 4512 3 acpi_cpufreq,cpufreq_stats,cpufreq_ondemand
cpufreq_powersave 1856 0
fuse 44348 1
loop 16708 0
firewire_sbp2 15956 0
ide_cs 10688 0
joydev 11328 0
irtty_sir 6176 0
sir_dev 13764 1 irtty_sir
arc4 2016 2
ecb 3552 2
crypto_blkcipher 18116 1 ecb
iwl4965 100500 0
snd_hda_intel 309976 0
pcmcia 36044 1 ide_cs
irda 106200 1 sir_dev
firmware_class 9088 2 iwl4965,pcmcia
snd_pcm 68228 1 snd_hda_intel
snd_timer 21320 1 snd_pcm
sdhci 16428 0
mac80211 122028 1 iwl4965
snd 48772 3 snd_hda_intel,snd_pcm,snd_timer
serio_raw 6532 0
crc_ccitt 2176 1 irda
mmc_core 43740 1 sdhci
parport_pc 25860 0
hci_usb 14652 2
container 4736 0
soundcore 7488 1 snd
parport 33868 1 parport_pc
rtc 14272 0
tpm_infineon 8488 0
tpm 14944 1 tpm_infineon
cfg80211 17800 1 mac80211
tpm_bios 6816 1 tpm
pcspkr 3136 0
psmouse 35920 0
ricoh_mmc 4128 0
yenta_socket 24300 4
rsrc_nonstatic 11584 1 yenta_socket
pcmcia_core 36436 4 ide_cs,pcmcia,yenta_socket,rsrc_nonstatic
video 19728 0
wmi 7880 0
iTCO_wdt 11204 0
bluetooth 52900 7 rfcomm,l2cap,hci_usb
snd_page_alloc 9992 2 snd_hda_intel,snd_pcm
ac 4448 0
output 3712 1 video
intel_agp 25084 1
agpgart 31720 2 drm,intel_agp
battery 8448 0
button 8240 0
evdev 11328 5
ext3 120360 1
jbd 43444 1 ext3
mbcache 8260 1 ext3
ide_cd_mod 32864 0
cdrom 31872 1 ide_cd_mod
sd_mod 26072 3
piix 7176 0 [permanent]
ide_pci_generic 4228 0 [permanent]
ide_core 100312 4 ide_cs,ide_cd_mod,piix,ide_pci_generic
ahci 27336 2
firewire_ohci 20836 0
firewire_core 35680 2 firewire_sbp2,firewire_ohci
crc_itu_t 2176 1 firewire_core
ehci_hcd 32620 0
uhci_hcd 22352 0
usbcore 130032 4 hci_usb,ehci_hcd,uhci_hcd
ata_generic 8004 0
e1000e 85156 0
libata 142288 2 ahci,ata_generic
scsi_mod 138668 3 firewire_sbp2,sd_mod,libata
dock 10448 1 libata
thermal 19100 0
processor 39660 4 acpi_cpufreq,thermal
fan 5636 0
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub [8086:2a00] (rev 0c)
Subsystem: Hewlett-Packard Company Device [103c:30be]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information <?>
Kernel driver in use: agpgart-intel
Kernel modules: intel-agp
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller [8086:2a02] (rev 0c)
Subsystem: Hewlett-Packard Company Device [103c:30be]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 16
Region 0: Memory at e4400000 (64-bit, non-prefetchable) [size=1M]
Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 4000 [size=8]
Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
Address: 00000000 Data: 0000
Capabilities: [d0] Power Management version 3
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Bridge: PM- B3+
00:02.1 Display controller [0380]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller [8086:2a03] (rev 0c)
Subsystem: Hewlett-Packard Company Device [103c:30be]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at e4500000 (64-bit, non-prefetchable) [size=1M]
Capabilities: [d0] Power Management version 3
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Bridge: PM- B3+
00:03.0 Communication controller [0780]: Intel Corporation Mobile PM965/GM965 MEI Controller [8086:2a04] (rev 0c)
Subsystem: Hewlett-Packard Company Device [103c:30be]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 255
Region 0: Memory at e4600000 (64-bit, non-prefetchable) [size=16]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [8c] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
00:03.2 IDE interface [0101]: Intel Corporation Mobile PM965/GM965 PT IDER Controller [8086:2a06] (rev 0c) (prog-if 85 [Master SecO PriO])
Subsystem: Hewlett-Packard Company Device [103c:30be]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 11
Region 0: I/O ports at 4008 [size=8]
Region 1: I/O ports at 4010 [size=4]
Region 2: I/O ports at 4018 [size=8]
Region 3: I/O ports at 4020 [size=4]
Region 4: I/O ports at 4030 [size=16]
Capabilities: [c8] Power Management version 3
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
00:03.3 Serial controller [0700]: Intel Corporation Mobile PM965/GM965 KT Controller [8086:2a07] (rev 0c) (prog-if 02)
Subsystem: Hewlett-Packard Company Device [103c:30be]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at 4040 [size=8]
Region 1: Memory at e4601000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [c8] Power Management version 3
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Kernel driver in use: serial
00:19.0 Ethernet controller [0200]: Intel Corporation 82566MM Gigabit Network Connection [8086:1049] (rev 03)
Subsystem: Hewlett-Packard Company Device [103c:30be]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 219
Region 0: Memory at e4620000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at e4640000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at 4060 [size=32]
Capabilities: [c8] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+
Address: 00000000fee0300c Data: 414a
Kernel driver in use: e1000e
Kernel modules: e1000e
00:1a.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 [8086:2834] (rev 03)
Subsystem: Hewlett-Packard Company Device [103c:30be]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at 4080 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 [8086:2835] (rev 03)
Subsystem: Hewlett-Packard Company Device [103c:30be]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at 40a0 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 [8086:283a] (rev 03) (prog-if 20)
Subsystem: Hewlett-Packard Company Device [103c:30be]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at e4641000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 03)
Subsystem: Hewlett-Packard Company Device [103c:30be]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at e4644000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 03)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=08, subordinate=08, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) Root Port (Slot-), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us
ClockPM- Suprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
Address: fee0300c Data: 41d1
Capabilities: [90] Subsystem: Hewlett-Packard Company Device [103c:30be]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.1 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 [8086:2841] (rev 03)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=10, subordinate=10, sec-latency=0
Memory behind bridge: e4000000-e40fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) Root Port (Slot-), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us
ClockPM- Suprise- LLActRep+ BwNot-
LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
Address: fee0300c Data: 41d9
Capabilities: [90] Subsystem: Hewlett-Packard Company Device [103c:30be]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.4 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 [8086:2847] (rev 03)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=28, subordinate=28, sec-latency=0
I/O behind bridge: 00002000-00003fff
Memory behind bridge: e0000000-e3ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #5, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us
ClockPM- Suprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+
Slot # 4, PowerLimit 0.160000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn+ PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
Address: fee0300c Data: 41e1
Capabilities: [90] Subsystem: Hewlett-Packard Company Device [103c:30be]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1d.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 03)
Subsystem: Hewlett-Packard Company Device [103c:30be]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at 40c0 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 03)
Subsystem: Hewlett-Packard Company Device [103c:30be]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 22
Region 4: I/O ports at 40e0 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832] (rev 03)
Subsystem: Hewlett-Packard Company Device [103c:30be]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 4100 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 03) (prog-if 20)
Subsystem: Hewlett-Packard Company Device [103c:30be]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 0: Memory at e4648000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev f3) (prog-if 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=02, subordinate=07, sec-latency=32
I/O behind bridge: 00005000-00005fff
Memory behind bridge: e4100000-e43fffff
Prefetchable memory behind bridge: 0000000080000000-0000000087ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Subsystem: Hewlett-Packard Company Device [103c:30be]
00:1f.0 ISA bridge [0601]: Intel Corporation 82801HBM (ICH8M-E) LPC Interface Controller [8086:2811] (rev 03)
Subsystem: Hewlett-Packard Company Device [103c:30be]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information <?>
Kernel modules: iTCO_wdt
00:1f.1 IDE interface [0101]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller [8086:2850] (rev 03) (prog-if 8a [Master SecP PriP])
Subsystem: Hewlett-Packard Company Device [103c:30be]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 4120 [size=16]
Kernel driver in use: PIIX_IDE
Kernel modules: piix
00:1f.2 SATA controller [0106]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller [8086:2829] (rev 03) (prog-if 01)
Subsystem: Hewlett-Packard Company Device [103c:30be]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 220
Region 0: I/O ports at 13f0 [size=8]
Region 1: I/O ports at 15f4 [size=4]
Region 2: I/O ports at 1370 [size=8]
Region 3: I/O ports at 1574 [size=4]
Region 4: I/O ports at 4160 [size=32]
Region 5: Memory at e4649000 (32-bit, non-prefetchable) [size=2K]
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/2 Enable+
Address: fee0300c Data: 4142
Capabilities: [70] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a8] SATA HBA <?>
Kernel driver in use: ahci
Kernel modules: ahci
02:06.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev b9)
Subsystem: Hewlett-Packard Company Device [103c:30be]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168
Interrupt: pin A routed to IRQ 18
Region 0: Memory at e4100000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=03, subordinate=03, sec-latency=176
Memory window 0: 80000000-83fff000 (prefetchable)
Memory window 1: 88000000-8bfff000
I/O window 0: 00005000-000050ff
I/O window 1: 00005400-000054ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
Kernel modules: yenta_socket
02:06.1 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev b9)
Subsystem: Hewlett-Packard Company Device [103c:30be]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168
Interrupt: pin B routed to IRQ 19
Region 0: Memory at e4101000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=04, subordinate=07, sec-latency=176
Memory window 0: 84000000-87fff000 (prefetchable)
Memory window 1: 8c000000-8ffff000
I/O window 0: 00005800-000058ff
I/O window 1: 00005c00-00005cff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
Kernel modules: yenta_socket
02:06.2 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 Controller [1180:0832] (rev 03) (prog-if 10)
Subsystem: Hewlett-Packard Company Device [103c:30be]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 1000ns max), Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 20
Region 0: Memory at e4102000 (32-bit, non-prefetchable) [size=2K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME+
Kernel driver in use: firewire_ohci
Kernel modules: firewire-ohci
02:06.3 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 20)
Subsystem: Hewlett-Packard Company Device [103c:30be]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 19
Region 0: Memory at e4103000 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
Kernel driver in use: sdhci
Kernel modules: sdhci
02:06.4 System peripheral [0880]: Ricoh Co Ltd R5C843 MMC Host Controller [1180:0843] (rev ff) (prog-if ff)
!!! Unknown header type 7f
Kernel driver in use: ricoh-mmc
Kernel modules: ricoh_mmc
10:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 4965 AG or AGN Network Connection [8086:4229] (rev 61)
Subsystem: Intel Corporation Device [8086:1101]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 218
Region 0: Memory at e4000000 (64-bit, non-prefetchable) [size=8K]
Capabilities: [c8] Power Management version 3
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+
Address: 00000000fee0300c Data: 4152
Capabilities: [e0] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 unlimited
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <128ns, L1 <64us
ClockPM+ Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Kernel driver in use: iwl4965
Kernel modules: iwl4965
-- System Information:
Debian Release: lenny/sid
APT prefers unstable
APT policy: (990, 'unstable'), (500, 'testing'), (1, 'experimental')
Architecture: i386 (i686)
Kernel: Linux 2.6.25-2-686 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.25-2-686 depends on:
ii debconf [debconf-2.0] 1.5.22 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92e tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.25-2-686 recommends:
ii libc6-i686 2.7-12 GNU C Library: Shared libraries [i
-- debconf information:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.25-2-686/preinst/abort-install-2.6.25-2-686:
linux-image-2.6.25-2-686/preinst/overwriting-modules-2.6.25-2-686: true
linux-image-2.6.25-2-686/prerm/would-invalidate-boot-loader-2.6.25-2-686: true
linux-image-2.6.25-2-686/preinst/elilo-initrd-2.6.25-2-686: true
linux-image-2.6.25-2-686/postinst/bootloader-test-error-2.6.25-2-686:
linux-image-2.6.25-2-686/postinst/depmod-error-initrd-2.6.25-2-686: false
linux-image-2.6.25-2-686/preinst/bootloader-initrd-2.6.25-2-686: true
linux-image-2.6.25-2-686/preinst/lilo-has-ramdisk:
linux-image-2.6.25-2-686/prerm/removing-running-kernel-2.6.25-2-686: true
linux-image-2.6.25-2-686/postinst/old-initrd-link-2.6.25-2-686: true
linux-image-2.6.25-2-686/postinst/bootloader-error-2.6.25-2-686:
linux-image-2.6.25-2-686/preinst/initrd-2.6.25-2-686:
linux-image-2.6.25-2-686/preinst/lilo-initrd-2.6.25-2-686: true
linux-image-2.6.25-2-686/postinst/old-system-map-link-2.6.25-2-686: true
linux-image-2.6.25-2-686/postinst/create-kimage-link-2.6.25-2-686: true
linux-image-2.6.25-2-686/postinst/old-dir-initrd-link-2.6.25-2-686: true
linux-image-2.6.25-2-686/preinst/abort-overwrite-2.6.25-2-686:
linux-image-2.6.25-2-686/preinst/failed-to-move-modules-2.6.25-2-686:
linux-image-2.6.25-2-686/postinst/kimage-is-a-directory:
linux-image-2.6.25-2-686/postinst/depmod-error-2.6.25-2-686: false
--- End Message ---