[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#503136: marked as done (linux-image-2.6.26-1-amd64: 5 minute freeze upon resume from a suspend to ram)



Your message dated Sat, 6 Dec 2008 01:13:22 -0500
with message-id <ffbe59220812052213i6ee4c457oe3ee3b24639c61cf@mail.gmail.com>
and subject line Re: Bug#503136: Acknowledgement (linux-image-2.6.26-1-amd64: 5 minute freeze upon resume from a suspend to ram)
has caused the Debian Bug report #503136,
regarding linux-image-2.6.26-1-amd64: 5 minute freeze upon resume from a suspend to ram
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
503136: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=503136
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message ---
Package: linux-image-2.6.26-1-amd64
Version: 2.6.26-9
Severity: normal

After upgrading from 2.6.26-8 to 2.6.26-9, there is often a 5 minute freeze at blank screen when a resume is initiated after suspend-to-ram for a while. The problem can often be reproduced by issuing the command "echo -n mem > /sys/power/state", wait a minute or so and hit the wake-up key ("Fn" key for my Thinkpad X61s). The resume process would stop at a blank screen with single text cursor for 5 minutes without any observable activities. Then, it would continue as normal. Downgrading back to 2.6.26-8 eliminates this problem.

Chun-Chung Chen
-- Package-specific info:
** Version:
Linux version 2.6.26-1-amd64 (Debian 2.6.26-8) (waldi@debian.org) (gcc version 4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 SMP Thu Oct 9 14:16:53 UTC 2008

** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.26-1-amd64 root=/dev/mapper/vg-w0 ro acpi_sleep=s3_bios quiet resume=/dev/mapper/vg-s0

** Not tainted

** Kernel log:
[ 1798.027789]   groups: 0 1
[ 1798.027795]   domain 1: span 0-1
[ 1798.027798]    groups: 0-1
[ 1798.027803]    domain 2: span 0-1
[ 1798.027806]     groups: 0-1
[ 1798.027812] CPU1 attaching sched-domain:
[ 1798.027815]  domain 0: span 0-1
[ 1798.027818]   groups: 1 0
[ 1798.027823]   domain 1: span 0-1
[ 1798.027826]    groups: 0-1
[ 1798.027830]    domain 2: span 0-1
[ 1798.027833]     groups: 0-1
[ 1797.946330] CPU1 is up
[ 1798.159658] Switched to high resolution mode on CPU 1
[ 1799.715839] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 1799.797327] PM: Writing back config space on device 0000:00:02.0 at offset 1 (was 900007, writing 900003) [ 1799.830480] PM: Writing back config space on device 0000:00:02.1 at offset 1 (was 900000, writing 900007) [ 1799.842073] ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level, low) -> IRQ 20
[ 1799.842090] PCI: Setting latency timer of device 0000:00:19.0 to 64
[ 1800.128044] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 20
[ 1800.128062] PCI: Setting latency timer of device 0000:00:1a.0 to 64
[ 1800.128199] usb usb2: root hub lost power or was reset
[ 1800.128239] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
[ 1800.128254] PCI: Setting latency timer of device 0000:00:1a.1 to 64
[ 1800.128387] usb usb3: root hub lost power or was reset
[ 1800.142456] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 22
[ 1800.142456] PCI: Setting latency timer of device 0000:00:1a.7 to 64
[ 1800.157458] PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100106, writing 100102) [ 1800.157528] ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 17
[ 1800.157548] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 1800.157689] PM: Writing back config space on device 0000:00:1c.0 at offset 1 (was 100107, writing 100507)
[ 1800.157813] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 1800.157928] PM: Writing back config space on device 0000:00:1c.1 at offset 1 (was 100107, writing 100507)
[ 1800.158052] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 1800.158075] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 1800.158090] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 1800.158225] usb usb5: root hub lost power or was reset
[ 1800.158263] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17
[ 1800.158277] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 1800.158408] usb usb6: root hub lost power or was reset
[ 1800.174201] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 19
[ 1800.174218] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 1800.174452] PM: Writing back config space on device 0000:00:1e.0 at offset 1 (was 100005, writing 100007)
[ 1800.174517] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 1800.174742] ACPI: PCI Interrupt 0000:00:1f.1[C] -> GSI 16 (level, low) -> IRQ 16 [ 1800.189305] PM: Writing back config space on device 0000:00:1f.2 at offset 1 (was 2b00007, writing 2b00407)
[ 1800.189441] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 1801.363659] PM: Writing back config space on device 0000:05:00.1 at offset 4 (was 0, writing f8301000) [ 1801.363676] PM: Writing back config space on device 0000:05:00.1 at offset 3 (was 800000, writing 802000) [ 1801.363696] PM: Writing back config space on device 0000:05:00.1 at offset 1 (was 2100000, writing 2100006) [ 1801.419570] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[f8301000-f83017ff] Max Packet=[2048] IR/IT contexts=[4/4] [ 1801.435886] PM: Writing back config space on device 0000:05:00.2 at offset 4 (was 0, writing f8301800) [ 1801.435902] PM: Writing back config space on device 0000:05:00.2 at offset 3 (was 800000, writing 804000) [ 1801.435921] PM: Writing back config space on device 0000:05:00.2 at offset 1 (was 2100000, writing 2100006) [ 1801.435976] ACPI: PCI Interrupt 0000:05:00.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 1801.516635] ata3: SATA link down (SStatus 0 SControl 300)
[ 1801.730766] sd 0:0:0:0: [sda] Starting disk
[ 1801.753779] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1801.755565] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
[ 1801.755572] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[ 1801.755761] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
[ 1801.755767] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[ 1801.759523] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
[ 1801.759530] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[ 1801.759732] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
[ 1801.759739] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[ 1801.761079] ata1.00: configured for UDMA/100
[ 1801.764280] ata1.00: configured for UDMA/100
[ 1801.764290] ata1: EH complete
[ 1801.764414] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[ 1801.764455] sd 0:0:0:0: [sda] Write Protect is off
[ 1801.764460] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1801.764527] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1801.764595] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[ 1801.764632] sd 0:0:0:0: [sda] Write Protect is off
[ 1801.764637] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1801.764702] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1802.861962] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 1802.861975] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 1802.863590] Restarting tasks ... done.
[ 1803.785703] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 1803.858331] Registered led device: iwl-phy0:radio
[ 1803.858361] Registered led device: iwl-phy0:assoc
[ 1803.858409] Registered led device: iwl-phy0:RX
[ 1803.858455] Registered led device: iwl-phy0:TX
[ 1803.873479] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1804.088753] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1818.134430] wlan0: Initial auth_alg=0
[ 1818.134430] wlan0: authenticate with AP 00:18:74:8a:8f:30
[ 1818.135828] wlan0: RX authentication from 00:18:74:8a:8f:30 (alg=0 transaction=2 status=0)
[ 1818.135828] wlan0: authenticated
[ 1818.135828] wlan0: associate with AP 00:18:74:8a:8f:30
[ 1818.142031] wlan0: RX AssocResp from 00:18:74:8a:8f:30 (capab=0x431 status=0 aid=1)
[ 1818.142043] wlan0: associated
[ 1818.142063] wlan0: CTS protection enabled (BSSID=00:18:74:8a:8f:30)
[ 1818.142071] wlan0: switched to short barker preamble (BSSID=00:18:74:8a:8f:30)
[ 1818.143854] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 1834.280054] wlan0: no IPv6 routers present
[ 2254.088508] wlan0: switched to long barker preamble (BSSID=00:18:74:8a:8f:30) [ 2386.021086] wlan0: switched to short barker preamble (BSSID=00:18:74:8a:8f:30)

** Loaded modules:
Module                  Size  Used by
i915                   35072  2
drm                    91488  3 i915
rfcomm                 38176  2
l2cap                  23936  9 rfcomm
bluetooth              57124  4 rfcomm,l2cap
ppdev                  11656  0
parport_pc             31016  0
lp                     14724  0
parport                41776  3 ppdev,parport_pc,lp
ipv6                  288328  26
fuse                   53184  1
dm_crypt               17032  0
ide_pci_generic         9220  0 [permanent]
pcmcia                 38680  0
snd_hda_intel         434776  1
piix                   12424  0 [permanent]
ide_core              128284  2 ide_pci_generic,piix
sdhci                  19460  0
yenta_socket           27916  1
arc4                    6272  2
ecb                     7296  2
rsrc_nonstatic         14080  1 yenta_socket
ohci1394               32564  0
crypto_blkcipher       21636  2 dm_crypt,ecb
mmc_core               52448  1 sdhci
ieee1394               93816  1 ohci1394
psmouse                42268  0
pcmcia_core            41508  3 pcmcia,yenta_socket,rsrc_nonstatic
snd_pcm_oss            41760  0
i2c_i801               13596  0
serio_raw               9860  0
snd_pcm                81800  2 snd_hda_intel,snd_pcm_oss
i2c_core               27936  1 i2c_i801
snd_mixer_oss          18816  1 snd_pcm_oss
pcspkr                  7040  0
ata_generic            10116  0
iTCO_wdt               15696  0
iwl3945                92916  0
firmware_class         12544  2 pcmcia,iwl3945
mac80211              162864  1 iwl3945
snd_seq_dummy           7428  0
cfg80211               30224  2 iwl3945,mac80211
snd_seq_oss            33152  0
snd_seq_midi_event     11904  1 snd_seq_oss
bay                     9216  0
snd_seq                54304  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
ac                      9352  0
snd_timer              25744  2 snd_pcm,snd_seq
battery                16904  0
video                  24084  0
output                  7808  1 video
snd_seq_device         11668  3 snd_seq_dummy,snd_seq_oss,snd_seq
snd 63688 10 snd_hda_intel,snd_pcm_oss,snd_pcm,snd_mixer_oss,snd_seq_oss,snd_seq,snd_timer,snd_seq_device
soundcore              12064  1 snd
button                 11680  0
snd_page_alloc         13072  2 snd_hda_intel,snd_pcm
e1000e                 99748  0
uhci_hcd               25760  0
ehci_hcd               36108  0
intel_agp              31728  1
thinkpad_acpi          64404  0
led_class               8968  2 iwl3945,thinkpad_acpi
evdev                  14208  7
nvram                  12556  1 thinkpad_acpi
ext3                  124688  2
jbd                    51240  1 ext3
mbcache                12804  1 ext3
dm_mirror              20608  0
dm_log                 13956  1 dm_mirror
dm_snapshot            19400  0
dm_mod                 58864  11 dm_crypt,dm_mirror,dm_log,dm_snapshot
sd_mod                 29376  3
thermal                22688  0
processor              42304  3 thermal
fan                     9352  0
thermal_sys            17728  4 video,thermal,processor,fan
ahci                   32520  2
libata                165472  2 ata_generic,ahci
scsi_mod              160760  2 sd_mod,libata
dock                   14112  2 bay,libata

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub [8086:2a00] (rev 0c)
   Subsystem: Lenovo T61 [17aa:20b3]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
   Latency: 0
   Capabilities: <access denied>
   Kernel driver in use: agpgart-intel
   Kernel modules: intel-agp

00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller [8086:2a02] (rev 0c) (prog-if 00 [VGA controller])
   Subsystem: Lenovo T61 [17aa:20b5]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0
   Interrupt: pin A routed to IRQ 16
   Region 0: Memory at f8100000 (64-bit, non-prefetchable) [size=1M]
   Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
   Region 4: I/O ports at 1800 [size=8]
   Capabilities: <access denied>
   Kernel modules: intelfb

00:02.1 Display controller [0380]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller [8086:2a03] (rev 0c)
   Subsystem: Lenovo T61 [17aa:20b5]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0
   Region 0: Memory at f8200000 (64-bit, non-prefetchable) [size=1M]
   Capabilities: <access denied>

00:19.0 Ethernet controller [0200]: Intel Corporation 82566MM Gigabit Network Connection [8086:1049] (rev 03)
   Subsystem: Lenovo Device [17aa:20de]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0
   Interrupt: pin A routed to IRQ 1275
   Region 0: Memory at fe000000 (32-bit, non-prefetchable) [size=128K]
   Region 1: Memory at fe025000 (32-bit, non-prefetchable) [size=4K]
   Region 2: I/O ports at 1840 [size=32]
   Capabilities: <access denied>
   Kernel driver in use: e1000e
   Kernel modules: e1000e

00:1a.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 [8086:2834] (rev 03) (prog-if 00 [UHCI])
   Subsystem: Lenovo ThinkPad T61 [17aa:20aa]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0
   Interrupt: pin A routed to IRQ 20
   Region 4: I/O ports at 1860 [size=32]
   Kernel driver in use: uhci_hcd
   Kernel modules: uhci-hcd

00:1a.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 [8086:2835] (rev 03) (prog-if 00 [UHCI])
   Subsystem: Lenovo ThinkPad T60 [17aa:20aa]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0
   Interrupt: pin B routed to IRQ 21
   Region 4: I/O ports at 1880 [size=32]
   Kernel driver in use: uhci_hcd
   Kernel modules: uhci-hcd

00:1a.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 [8086:283a] (rev 03) (prog-if 20 [EHCI])
   Subsystem: Lenovo ThinkPad T61 [17aa:20ab]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0
   Interrupt: pin C routed to IRQ 22
   Region 0: Memory at fe226c00 (32-bit, non-prefetchable) [size=1K]
   Capabilities: <access denied>
   Kernel driver in use: ehci_hcd
   Kernel modules: ehci-hcd

00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 03)
   Subsystem: Lenovo ThinkPad T61 [17aa:20ac]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0, Cache Line Size: 64 bytes
   Interrupt: pin B routed to IRQ 17
   Region 0: Memory at fe020000 (64-bit, non-prefetchable) [size=16K]
   Capabilities: <access denied>
   Kernel driver in use: HDA Intel
   Kernel modules: snd-hda-intel

00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0, Cache Line Size: 64 bytes
   Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
   I/O behind bridge: 00002000-00002fff
   Memory behind bridge: fc000000-fdffffff
   Prefetchable memory behind bridge: 00000000f8000000-00000000f80fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
   BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
       PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
   Capabilities: <access denied>
   Kernel driver in use: pcieport-driver
   Kernel modules: shpchp

00:1c.1 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 [8086:2841] (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0, Cache Line Size: 64 bytes
   Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
   I/O behind bridge: 00003000-00003fff
   Memory behind bridge: dc100000-dfcfffff
   Prefetchable memory behind bridge: 00000000dfe00000-00000000dfefffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
   BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
       PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
   Capabilities: <access denied>
   Kernel driver in use: pcieport-driver
   Kernel modules: shpchp

00:1d.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 03) (prog-if 00 [UHCI])
   Subsystem: Lenovo ThinkPad T61 [17aa:20aa]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0
   Interrupt: pin A routed to IRQ 16
   Region 4: I/O ports at 18a0 [size=32]
   Kernel driver in use: uhci_hcd
   Kernel modules: uhci-hcd

00:1d.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 03) (prog-if 00 [UHCI])
   Subsystem: Lenovo ThinkPad T61 [17aa:20aa]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0
   Interrupt: pin B routed to IRQ 17
   Region 4: I/O ports at 18c0 [size=32]
   Kernel driver in use: uhci_hcd
   Kernel modules: uhci-hcd

00:1d.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 03) (prog-if 20 [EHCI])
   Subsystem: Lenovo ThinkPad T61 [17aa:20ab]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0
   Interrupt: pin D routed to IRQ 19
   Region 0: Memory at fe227000 (32-bit, non-prefetchable) [size=1K]
   Capabilities: <access denied>
   Kernel driver in use: ehci_hcd
   Kernel modules: ehci-hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev f3) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0
   Bus: primary=00, secondary=05, subordinate=08, sec-latency=32
   I/O behind bridge: 00004000-00007fff
   Memory behind bridge: f8300000-fbffffff
   Prefetchable memory behind bridge: 00000000f4000000-00000000f7ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
   BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
       PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
   Capabilities: <access denied>

00:1f.0 ISA bridge [0601]: Intel Corporation 82801HBM (ICH8M-E) LPC Interface Controller [8086:2811] (rev 03)
   Subsystem: Lenovo T61 [17aa:20b6]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0
   Capabilities: <access denied>
   Kernel modules: iTCO_wdt

00:1f.1 IDE interface [0101]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller [8086:2850] (rev 03) (prog-if 8a [Master SecP PriP])
   Subsystem: Lenovo ThinkPad T61 [17aa:20a6]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
   Latency: 0
   Interrupt: pin C routed to IRQ 16
   Region 0: I/O ports at 01f0 [size=8]
   Region 1: I/O ports at 03f4 [size=1]
   Region 2: I/O ports at 0170 [size=8]
   Region 3: I/O ports at 0374 [size=1]
   Region 4: I/O ports at 18e0 [size=16]
   Kernel driver in use: PIIX_IDE
   Kernel modules: ide-pci-generic, piix, ata_generic

00:1f.2 SATA controller [0106]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller [8086:2829] (rev 03) (prog-if 01 [AHCI 1.0])
   Subsystem: Lenovo ThinkPad T61 [17aa:20a7]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0
   Interrupt: pin B routed to IRQ 1277
   Region 0: I/O ports at 1c30 [size=8]
   Region 1: I/O ports at 1c24 [size=4]
   Region 2: I/O ports at 1c28 [size=8]
   Region 3: I/O ports at 1c20 [size=4]
   Region 4: I/O ports at 1c00 [size=32]
   Region 5: Memory at fe226000 (32-bit, non-prefetchable) [size=2K]
   Capabilities: <access denied>
   Kernel driver in use: ahci
   Kernel modules: ahci

00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] (rev 03)
   Subsystem: Lenovo ThinkPad T61 [17aa:20a9]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Interrupt: pin A routed to IRQ 23
   Region 0: Memory at fe227400 (32-bit, non-prefetchable) [size=256]
   Region 4: I/O ports at 1c40 [size=32]
   Kernel driver in use: i801_smbus
   Kernel modules: i2c-i801

03:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection [8086:4227] (rev 02)
   Subsystem: Intel Corporation Device [8086:1010]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0, Cache Line Size: 64 bytes
   Interrupt: pin A routed to IRQ 1276
   Region 0: Memory at dfcff000 (32-bit, non-prefetchable) [size=4K]
   Capabilities: <access denied>
   Kernel driver in use: iwl3945
   Kernel modules: iwl3945

05:00.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev ba)
   Subsystem: Lenovo Device [17aa:20c6]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 168
   Interrupt: pin A routed to IRQ 16
   Region 0: Memory at f8300000 (32-bit, non-prefetchable) [size=4K]
   Bus: primary=05, secondary=06, subordinate=07, sec-latency=176
   Memory window 0: f4000000-f7fff000 (prefetchable)
   Memory window 1: 80000000-83fff000
   I/O window 0: 00004000-000040ff
   I/O window 1: 00004400-000044ff
   BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
   16-bit legacy interface ports at 0001
   Kernel driver in use: yenta_cardbus
   Kernel modules: yenta_socket

05:00.1 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 Controller [1180:0832] (rev 04) (prog-if 10 [OHCI])
   Subsystem: Lenovo Device [17aa:20c7]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 32 (500ns min, 1000ns max)
   Interrupt: pin B routed to IRQ 17
   Region 0: Memory at f8301000 (32-bit, non-prefetchable) [size=2K]
   Capabilities: <access denied>
   Kernel driver in use: ohci1394
   Kernel modules: ohci1394

05:00.2 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 21)
   Subsystem: Lenovo Device [17aa:20c8]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 64
   Interrupt: pin C routed to IRQ 18
   Region 0: Memory at f8301800 (32-bit, non-prefetchable) [size=256]
   Capabilities: <access denied>
   Kernel driver in use: sdhci
   Kernel modules: sdhci



-- System Information:
Debian Release: lenny/sid
 APT prefers unstable
 APT policy: (500, 'unstable'), (500, 'testing'), (1, 'experimental')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.26-1-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages linux-image-2.6.26-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy ii initramfs-tools [linux-initra 0.92l tools for generating an initramfs ii module-init-tools 3.4-1 tools for managing Linux kernel mo

linux-image-2.6.26-1-amd64 recommends no packages.

Versions of packages linux-image-2.6.26-1-amd64 suggests:
ii grub-pc [grub] 1.96+20080724-10 GRand Unified Bootloader, version
pn  linux-doc-2.6.26        <none>           (no description available)

-- debconf information:
* linux-image-2.6.26-1-amd64/postinst/create-kimage-link-2.6.26-1-amd64: false
 shared/kernel-image/really-run-bootloader: true
 linux-image-2.6.26-1-amd64/postinst/kimage-is-a-directory:
* linux-image-2.6.26-1-amd64/preinst/bootloader-initrd-2.6.26-1-amd64: false
 linux-image-2.6.26-1-amd64/postinst/old-initrd-link-2.6.26-1-amd64: true
 linux-image-2.6.26-1-amd64/preinst/initrd-2.6.26-1-amd64:
linux-image-2.6.26-1-amd64/postinst/old-system-map-link-2.6.26-1-amd64: true linux-image-2.6.26-1-amd64/postinst/depmod-error-initrd-2.6.26-1-amd64: false linux-image-2.6.26-1-amd64/preinst/overwriting-modules-2.6.26-1-amd64: true
 linux-image-2.6.26-1-amd64/preinst/elilo-initrd-2.6.26-1-amd64: true
 linux-image-2.6.26-1-amd64/postinst/bootloader-error-2.6.26-1-amd64:
 linux-image-2.6.26-1-amd64/preinst/abort-install-2.6.26-1-amd64:
 linux-image-2.6.26-1-amd64/preinst/lilo-initrd-2.6.26-1-amd64: true
 linux-image-2.6.26-1-amd64/postinst/depmod-error-2.6.26-1-amd64: false
linux-image-2.6.26-1-amd64/prerm/removing-running-kernel-2.6.26-1-amd64: true linux-image-2.6.26-1-amd64/prerm/would-invalidate-boot-loader-2.6.26-1-amd64: true
 linux-image-2.6.26-1-amd64/postinst/bootloader-test-error-2.6.26-1-amd64:
 linux-image-2.6.26-1-amd64/preinst/abort-overwrite-2.6.26-1-amd64:
linux-image-2.6.26-1-amd64/postinst/old-dir-initrd-link-2.6.26-1-amd64: true
 linux-image-2.6.26-1-amd64/preinst/lilo-has-ramdisk:
 linux-image-2.6.26-1-amd64/preinst/failed-to-move-modules-2.6.26-1-amd64:



--- End Message ---
--- Begin Message ---
Version: 2.6.26-11
This problem remained in version 2.6.26-10 but is apparently fixed in 2.6.26-11

This bug is probably the same as #504167 and maybe #503998, #506577 as well.

--
Chun-Chung Chen

--- End Message ---

Reply to: