Bug#507437: linux-image-2.6.26-1-amd64: Strange message during boot: 'kernel alive ... kernel direct mapping tables up to ...'
Package: linux-image-2.6.26-1-amd64
Version: 2.6.26-10
Severity: minor
when I boot my Samsumg Q45 (laptop), I get the following messages at the
_bottom_ of the screen. They remain there until the normal boot messages get
to the bottom of the screen and overwrite them.
Kernel alive
kernel direct mapping tables up to 100000000 @ 8000-d000
-- Package-specific info:
** Version:
Linux version 2.6.26-1-amd64 (Debian 2.6.26-10) (waldi@debian.org) (gcc version 4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 SMP Sat Nov 8 18:25:23 UTC 2008
** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.26-1-amd64 root=/dev/mapper/durandal-root ro quiet
** Not tainted
** Kernel log:
[ 7.225542] ACPI: Lid Switch [LID0]
[ 7.225615] input: Power Button (CM) as /class/input/input4
[ 7.265457] ACPI: Power Button (CM) [PWRB]
[ 7.265539] input: Sleep Button (CM) as /class/input/input5
[ 7.329460] ACPI: Sleep Button (CM) [SLPB]
[ 7.349921] ACPI: AC Adapter [ADP1] (off-line)
[ 7.417396] ACPI: Battery Slot [BAT1] (battery present)
[ 7.797302] ACPI: WMI: Mapper loaded
[ 7.959789] Linux video capture interface: v2.00
[ 8.172103] usbcore: registered new interface driver hiddev
[ 8.187117] input: Logitech USB Optical Mouse as /class/input/input6
[ 8.244935] input,hidraw0: USB HID v1.10 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1
[ 8.257111] input: HID 046a:0023 as /class/input/input7
[ 8.284553] uvcvideo: Found UVC 1.00 device Vega USB 2.0 Camera. (0ac8:c302)
[ 8.288211] input: Vega USB 2.0 Camera. as /class/input/input8
[ 8.299942] input,hidraw1: USB HID v1.11 Keyboard [HID 046a:0023] on usb-0000:00:1d.0-2
[ 8.322474] input: HID 046a:0023 as /class/input/input9
[ 8.391995] input,hidraw2: USB HID v1.11 Device [HID 046a:0023] on usb-0000:00:1d.0-2
[ 8.392044] usbcore: registered new interface driver usbhid
[ 8.392048] usbhid: v2.6:USB HID core driver
[ 8.392075] usbcore: registered new interface driver uvcvideo
[ 8.392079] USB Video Class driver (v0.1.0)
[ 8.395492] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
[ 8.396044] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
[ 8.396044] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 8.798371] input: PC Speaker as /class/input/input10
[ 8.812030] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks
[ 8.812030] iwl3945: Copyright(c) 2003-2008 Intel Corporation
[ 8.812030] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 8.812030] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 8.812030] iwl3945: Detected Intel Wireless WiFi Link 3945BG
[ 8.875052] iwl3945: Tunable channels: 11 802.11bg, 0 802.11a channels
[ 8.875052] phy0: Selected rate control algorithm 'iwl-3945-rs'
[ 9.098421] ACPI: PCI interrupt for device 0000:02:00.0 disabled
[ 9.109124] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
[ 9.109124] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 9.141132] hda_codec: Unknown model for ALC262, trying auto-probe from BIOS...
[ 9.212319] Yenta: CardBus bridge found at 0000:04:09.0 [144d:c510]
[ 9.212319] PCI: Bus 5, cardbus bridge: 0000:04:09.0
[ 9.212319] IO window: 0x00003000-0x000030ff
[ 9.212319] IO window: 0x00003400-0x000034ff
[ 9.212319] PREFETCH window: 0x88400000-0x887fffff
[ 9.212319] MEM window: 0x8c000000-0x8fffffff
[ 9.339606] Yenta: ISA IRQ mask 0x0cb8, PCI irq 20
[ 9.339611] Socket status: 30000006
[ 9.339614] Yenta: Raising subordinate bus# of parent bus (#04) from #05 to #08
[ 9.339621] pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
[ 9.339624] pcmcia: parent PCI bridge Memory window: 0xf0400000 - 0xf04fffff
[ 9.349203] ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 19 (level, low) -> IRQ 19
[ 9.501075] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04713/0x200000
[ 9.539053] input: SynPS/2 Synaptics TouchPad as /class/input/input11
[ 11.581232] EXT3 FS on dm-0, internal journal
[ 12.187217] loop: module loaded
[ 149.572310] kjournald starting. Commit interval 5 seconds
[ 149.575144] EXT3 FS on dm-3, internal journal
[ 149.575144] EXT3-fs: mounted filesystem with ordered data mode.
[ 154.474916] NET: Registered protocol family 10
[ 154.475469] lo: Disabled Privacy Extensions
[ 155.172229] pnp: the driver 'parport_pc' has been registered
[ 155.172229] lp: driver loaded but no devices found
[ 155.218064] ppdev: user-space parallel port driver
[ 163.563167] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[ 165.874024] Bluetooth: Core ver 2.11
[ 165.879351] NET: Registered protocol family 31
[ 165.879351] Bluetooth: HCI device and connection manager initialized
[ 165.879351] Bluetooth: HCI socket layer initialized
[ 165.934023] Bluetooth: L2CAP ver 2.9
[ 165.934023] Bluetooth: L2CAP socket layer initialized
[ 166.031512] Bluetooth: RFCOMM socket layer initialized
[ 166.031512] Bluetooth: RFCOMM TTY layer initialized
[ 166.031512] Bluetooth: RFCOMM ver 1.8
[ 166.295951] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 166.301934] PM: Writing back config space on device 0000:02:00.0 at offset 1 (was 100102, writing 100106)
[ 166.301934] firmware: requesting iwlwifi-3945-1.ucode
[ 166.534199] Registered led device: iwl-phy0:radio
[ 166.534239] Registered led device: iwl-phy0:assoc
[ 166.534239] Registered led device: iwl-phy0:RX
[ 166.534239] Registered led device: iwl-phy0:TX
[ 166.563882] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 166.645920] sky2 eth0: enabling interface
[ 166.649382] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 168.429220] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
[ 168.429700] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 172.618245] [drm] Initialized drm 1.1.0 20060810
[ 172.644047] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 172.644047] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 172.644047] [drm] Initialized i915 1.6.0 20060119 on minor 0
[ 181.548592] eth0: no IPv6 routers present
[ 200.683361] CPU0 attaching NULL sched-domain.
[ 200.683374] CPU1 attaching NULL sched-domain.
[ 200.698567] CPU0 attaching sched-domain:
[ 200.698576] domain 0: span 0-1
[ 200.698580] groups: 0 1
[ 200.698586] domain 1: span 0-1
[ 200.698589] groups: 0-1
[ 200.698595] CPU1 attaching sched-domain:
[ 200.698599] domain 0: span 0-1
[ 200.698602] groups: 1 0
[ 200.698607] domain 1: span 0-1
[ 200.698610] groups: 0-1
** Loaded modules:
Module Size Used by
i915 35072 2
drm 91488 3 i915
binfmt_misc 13580 1
rfcomm 38176 2
l2cap 23936 9 rfcomm
bluetooth 57124 4 rfcomm,l2cap
ppdev 11656 0
parport_pc 31016 0
lp 14724 0
parport 41776 3 ppdev,parport_pc,lp
ipv6 288328 30
acpi_cpufreq 11792 1
cpufreq_powersave 6400 0
cpufreq_conservative 11784 0
cpufreq_ondemand 11792 1
cpufreq_stats 9120 0
freq_table 9344 3 acpi_cpufreq,cpufreq_ondemand,cpufreq_stats
cpufreq_userspace 8452 0
sha256_generic 13696 0
aes_x86_64 12416 2
aes_generic 32552 1 aes_x86_64
cbc 7936 1
dm_crypt 17032 1
loop 19468 0
pcmcia 38680 0
arc4 6272 2
ecb 7296 2
crypto_blkcipher 21636 4 cbc,dm_crypt,ecb
joydev 14848 0
snd_hda_intel 434776 4
serio_raw 9860 0
i2c_i801 13596 0
yenta_socket 27916 1
rsrc_nonstatic 14080 1 yenta_socket
pcmcia_core 41508 3 pcmcia,yenta_socket,rsrc_nonstatic
iwl3945 92916 0
pcspkr 7040 0
psmouse 42268 0
snd_pcm 81672 2 snd_hda_intel
snd_seq 54304 0
snd_timer 25744 3 snd_pcm,snd_seq
i2c_core 27936 1 i2c_i801
iTCO_wdt 15696 0
firmware_class 12544 2 pcmcia,iwl3945
uvcvideo 55560 0
snd_seq_device 11668 1 snd_seq
usbhid 45792 0
mac80211 162864 1 iwl3945
hid 41792 1 usbhid
compat_ioctl32 12288 1 uvcvideo
videodev 35840 2 uvcvideo,compat_ioctl32
ff_memless 9224 1 usbhid
led_class 8968 1 iwl3945
snd 63688 11 snd_hda_intel,snd_pcm,snd_seq,snd_timer,snd_seq_device
v4l1_compat 17284 2 uvcvideo,videodev
wmi 11712 0
cfg80211 30224 2 iwl3945,mac80211
soundcore 12064 1 snd
snd_page_alloc 13072 2 snd_hda_intel,snd_pcm
battery 16904 0
ac 9352 0
button 11680 0
intel_agp 31728 1
evdev 14208 10
ext3 124944 2
jbd 51240 1 ext3
mbcache 12804 1 ext3
dm_mirror 20608 0
dm_log 13956 1 dm_mirror
dm_snapshot 19400 0
dm_mod 58864 12 dm_crypt,dm_mirror,dm_log,dm_snapshot
sg 36448 0
sr_mod 19652 0
cdrom 37928 1 sr_mod
sd_mod 29376 2
ata_piix 22660 1
ata_generic 10116 0
libata 165472 2 ata_piix,ata_generic
scsi_mod 160760 4 sg,sr_mod,sd_mod,libata
dock 14112 1 libata
ricoh_mmc 8448 0
ohci1394 32564 0
sdhci 19460 0
ieee1394 93816 1 ohci1394
mmc_core 52448 1 sdhci
ide_pci_generic 9220 0 [permanent]
ide_core 128284 1 ide_pci_generic
sky2 48004 0
ehci_hcd 36108 0
uhci_hcd 25760 0
thermal 22688 0
processor 42304 4 acpi_cpufreq,thermal
fan 9352 0
thermal_sys 17728 3 thermal,processor,fan
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub [8086:2a00] (rev 03)
Subsystem: Samsung Electronics Co Ltd Device [144d:c510]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
Kernel modules: intel-agp
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller [8086:2a02] (rev 03) (prog-if 00 [VGA controller])
Subsystem: Samsung Electronics Co Ltd Device [144d:c510]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f0000000 (64-bit, non-prefetchable) [size=1M]
Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 1800 [size=8]
Capabilities: <access denied>
Kernel modules: intelfb
00:02.1 Display controller [0380]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller [8086:2a03] (rev 03)
Subsystem: Samsung Electronics Co Ltd Device [144d:c510]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at f0100000 (64-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>
00:1a.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 [8086:2834] (rev 03) (prog-if 00 [UHCI])
Subsystem: Samsung Electronics Co Ltd Device [144d:c510]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at 1820 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 [8086:2835] (rev 03) (prog-if 00 [UHCI])
Subsystem: Samsung Electronics Co Ltd Device [144d:c510]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 1840 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 [8086:283a] (rev 03) (prog-if 20 [EHCI])
Subsystem: Samsung Electronics Co Ltd Device [144d:c510]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f0704000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 03)
Subsystem: Samsung Electronics Co Ltd Device [144d:c510]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at f0500000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: f0300000-f03fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.1 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 [8086:2841] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: f0200000-f02fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1d.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 03) (prog-if 00 [UHCI])
Subsystem: Samsung Electronics Co Ltd Device [144d:c510]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at 1860 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 03) (prog-if 00 [UHCI])
Subsystem: Samsung Electronics Co Ltd Device [144d:c510]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 1880 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832] (rev 03) (prog-if 00 [UHCI])
Subsystem: Samsung Electronics Co Ltd Device [144d:c510]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 18a0 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 03) (prog-if 20 [EHCI])
Subsystem: Samsung Electronics Co Ltd Device [144d:c510]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f0704400 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev f3) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=04, subordinate=08, sec-latency=32
I/O behind bridge: 00003000-00003fff
Memory behind bridge: f0400000-f04fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller [8086:2815] (rev 03)
Subsystem: Samsung Electronics Co Ltd Device [144d:c510]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel modules: iTCO_wdt
00:1f.2 IDE interface [0101]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA IDE Controller [8086:2828] (rev 03) (prog-if 80 [Master])
Subsystem: Samsung Electronics Co Ltd Device [144d:c510]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 18e0 [size=16]
Region 5: I/O ports at 18d0 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
Kernel modules: ide-pci-generic, ata_generic, ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] (rev 03)
Subsystem: Samsung Electronics Co Ltd Device [144d:c510]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 19
Region 0: Memory at 88000000 (32-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 1c00 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801
02:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection [8086:4222] (rev 02)
Subsystem: Intel Corporation PRO/Wireless 3945BG Network Connection [8086:1034]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 1276
Region 0: Memory at f0300000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: iwl3945
Kernel modules: iwl3945
03:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8039 PCI-E Fast Ethernet Controller [11ab:4353] (rev 15)
Subsystem: Samsung Electronics Co Ltd Device [144d:c510]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 1277
Region 0: Memory at f0200000 (64-bit, non-prefetchable) [size=16K]
Region 2: I/O ports at 2000 [size=256]
Capabilities: <access denied>
Kernel driver in use: sky2
Kernel modules: sky2
04:09.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev b4)
Subsystem: Samsung Electronics Co Ltd Device [144d:c510]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168
Interrupt: pin A routed to IRQ 20
Region 0: Memory at f0400000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=04, secondary=05, subordinate=08, sec-latency=176
Memory window 0: 88400000-887ff000 (prefetchable)
Memory window 1: 8c000000-8ffff000
I/O window 0: 00003000-000030ff
I/O window 1: 00003400-000034ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
Kernel modules: yenta_socket
04:09.1 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C552 IEEE 1394 Controller [1180:0552] (rev 09) (prog-if 10 [OHCI])
Subsystem: Samsung Electronics Co Ltd Device [144d:c510]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 1000ns max)
Interrupt: pin B routed to IRQ 21
Region 0: Memory at f0401000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ohci1394
Kernel modules: ohci1394
04:09.2 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 18)
Subsystem: Samsung Electronics Co Ltd Device [144d:c510]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin C routed to IRQ 22
Region 0: Memory at f0401800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: sdhci
Kernel modules: sdhci
04:09.3 System peripheral [0880]: Ricoh Co Ltd R5C843 MMC Host Controller [1180:0843] (rev 09)
Subsystem: Samsung Electronics Co Ltd Device [144d:c510]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 255
Region 0: Memory at f0401c00 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ricoh-mmc
Kernel modules: ricoh_mmc
04:09.4 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter [1180:0592] (rev 04)
Subsystem: Samsung Electronics Co Ltd Device [144d:c510]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 255
Region 0: Memory at f0402000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
04:09.5 System peripheral [0880]: Ricoh Co Ltd xD-Picture Card Controller [1180:0852] (rev ff) (prog-if ff)
!!! Unknown header type 7f
-- System Information:
Debian Release: lenny/sid
APT prefers testing
APT policy: (530, 'testing'), (520, 'unstable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.26-1-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.26-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92j tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
linux-image-2.6.26-1-amd64 recommends no packages.
Versions of packages linux-image-2.6.26-1-amd64 suggests:
ii grub-pc [grub] 1.96+20080724-12 GRand Unified Bootloader, version
ii linux-doc-2.6.26 2.6.26-10 Linux kernel specific documentatio
-- debconf information:
linux-image-2.6.26-1-amd64/postinst/create-kimage-link-2.6.26-1-amd64: true
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.26-1-amd64/postinst/kimage-is-a-directory:
linux-image-2.6.26-1-amd64/preinst/bootloader-initrd-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/postinst/old-initrd-link-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/preinst/initrd-2.6.26-1-amd64:
linux-image-2.6.26-1-amd64/postinst/old-system-map-link-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/postinst/depmod-error-initrd-2.6.26-1-amd64: false
linux-image-2.6.26-1-amd64/preinst/overwriting-modules-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/preinst/elilo-initrd-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/postinst/bootloader-error-2.6.26-1-amd64:
linux-image-2.6.26-1-amd64/preinst/abort-install-2.6.26-1-amd64:
linux-image-2.6.26-1-amd64/preinst/lilo-initrd-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/postinst/depmod-error-2.6.26-1-amd64: false
linux-image-2.6.26-1-amd64/prerm/removing-running-kernel-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/prerm/would-invalidate-boot-loader-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/postinst/bootloader-test-error-2.6.26-1-amd64:
linux-image-2.6.26-1-amd64/preinst/abort-overwrite-2.6.26-1-amd64:
linux-image-2.6.26-1-amd64/postinst/old-dir-initrd-link-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/preinst/lilo-has-ramdisk:
linux-image-2.6.26-1-amd64/preinst/failed-to-move-modules-2.6.26-1-amd64:
Reply to: