[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#478278: marked as done (BUG: soft lockup - CPU#0 stuck for 11s! [ipw2200/0:1447])

Your message dated Sun, 9 Nov 2008 21:59:10 +0100
with message-id <20081109205910.GA12290@dedibox-hostname>
and subject line Re: Bug#478278: BUG: soft lockup - CPU#0 stuck for 11s! [ipw2200/0:1447]
has caused the Debian Bug report #478278,
regarding BUG: soft lockup - CPU#0 stuck for 11s! [ipw2200/0:1447]
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
478278: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=478278
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message --- 
Package: ipw2200-source
Version: 1.2.1-4
Severity: important

Hi,

Sometime, when I try to associate my ipw2200 card with an accesspoint I
get this problem:
iwlist said the mac address of the AP is 02:13:CE:00:00:4B
But 02:13:CE is not a registred manufactured.
http://standards.ieee.org/regauth/oui/oui.txt

BUG: soft lockup - CPU#0 stuck for 11s! [ipw2200/0:1447]

Pid: 1447, comm: ipw2200/0 Not tainted (2.6.24-1-686 #1)
EIP: 0060:[<c02bdb31>] EFLAGS: 00000246 CPU: 0
EIP is at _spin_unlock_irqrestore+0xa/0x13
EAX: 00000246 EBX: dfa7b734 ECX: 00000246 EDX: 00000200
ESI: dfa7abbc EDI: dfa49f7c EBP: dfa7abbc ESP: dfa49f40
 DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
CR0: 8005003b CR2: 0807f040 CR3: 37f95000 CR4: 000006d0
DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
DR6: ffff0ff0 DR7: 00000400
 [<c013274d>] queue_work+0x33/0x3c
 [<f8b2fe73>] ipw_associate+0x109/0x567 [ipw2200]
 [<c0115e6c>] smp_apic_timer_interrupt+0x71/0x7d
 [<c0104980>] apic_timer_interrupt+0x28/0x30
 [<f8b30574>] ipw_bg_associate+0x0/0x27 [ipw2200]
 [<f8b30592>] ipw_bg_associate+0x1e/0x27 [ipw2200]
 [<c013220d>] run_workqueue+0x7d/0x109
 [<c0132a83>] worker_thread+0x0/0xc5
 [<c0132b3d>] worker_thread+0xba/0xc5
 [<c01353f9>] autoremove_wake_function+0x0/0x35
 [<c0135332>] kthread+0x38/0x5e
 [<c01352fa>] kthread+0x0/0x5e
 [<c0104b0f>] kernel_thread_helper+0x7/0x10
 =======================
BUG: soft lockup - CPU#0 stuck for 11s! [ipw2200/0:1447]

Pid: 1447, comm: ipw2200/0 Not tainted (2.6.24-1-686 #1)
EIP: 0060:[<f8b2fd7d>] EFLAGS: 00000282 CPU: 0
EIP is at ipw_associate+0x13/0x567 [ipw2200]
EAX: 00000000 EBX: dfa7abc8 ECX: dfa7b738 EDX: df93a904
ESI: dfa7abbc EDI: dfa49f74 EBP: dfa7abbc ESP: dfa49f4c
 DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
CR0: 8005003b CR2: 0807f040 CR3: 37f95000 CR4: 000006d0
DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
DR6: ffff0ff0 DR7: 00000400
 [<c0104980>] apic_timer_interrupt+0x28/0x30
 [<f8b30574>] ipw_bg_associate+0x0/0x27 [ipw2200]
 [<f8b30574>] ipw_bg_associate+0x0/0x27 [ipw2200]
 [<f8b30592>] ipw_bg_associate+0x1e/0x27 [ipw2200]
 [<c013220d>] run_workqueue+0x7d/0x109
 [<c0132a83>] worker_thread+0x0/0xc5
 [<c0132b3d>] worker_thread+0xba/0xc5
 [<c01353f9>] autoremove_wake_function+0x0/0x35
 [<c0135332>] kthread+0x38/0x5e
 [<c01352fa>] kthread+0x0/0x5e
 [<c0104b0f>] kernel_thread_helper+0x7/0x10
 =======================
BUG: soft lockup - CPU#0 stuck for 11s! [ipw2200/0:1447]

Pid: 1447, comm: ipw2200/0 Not tainted (2.6.24-1-686 #1)
EIP: 0060:[<c01326da>] EFLAGS: 00000246 CPU: 0
EIP is at __queue_work+0x4/0x28
EAX: df93a900 EBX: dfa7b734 ECX: df9ab820 EDX: dfa7b734
ESI: dfa7b734 EDI: dfa49f7c EBP: dfa7abbc ESP: dfa49f38
 DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
CR0: 8005003b CR2: 0807f040 CR3: 37f95000 CR4: 000006d0
DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
DR6: ffff0ff0 DR7: 00000400
 [<c013274d>] queue_work+0x33/0x3c
 [<f8b2fe73>] ipw_associate+0x109/0x567 [ipw2200]
 [<c0115e6c>] smp_apic_timer_interrupt+0x71/0x7d
 [<c0104980>] apic_timer_interrupt+0x28/0x30
 [<c0104980>] apic_timer_interrupt+0x28/0x30
 [<f8b30574>] ipw_bg_associate+0x0/0x27 [ipw2200]
 [<f8b30592>] ipw_bg_associate+0x1e/0x27 [ipw2200]
 [<c013220d>] run_workqueue+0x7d/0x109
 [<c0132a83>] worker_thread+0x0/0xc5
 [<c0132b3d>] worker_thread+0xba/0xc5
 [<c01353f9>] autoremove_wake_function+0x0/0x35
 [<c0135332>] kthread+0x38/0x5e
 [<c01352fa>] kthread+0x0/0x5e
 [<c0104b0f>] kernel_thread_helper+0x7/0x10
 =======================
BUG: soft lockup - CPU#0 stuck for 11s! [ipw2200/0:1447]

Pid: 1447, comm: ipw2200/0 Not tainted (2.6.24-1-686 #1)
EIP: 0060:[<c02bdb31>] EFLAGS: 00000246 CPU: 0
EIP is at _spin_unlock_irqrestore+0xa/0x13
EAX: 00000246 EBX: dfa7b734 ECX: 00000246 EDX: 00000200
ESI: dfa7abbc EDI: dfa49f7c EBP: dfa7abbc ESP: dfa49f40
 DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
CR0: 8005003b CR2: 0807f040 CR3: 37f95000 CR4: 000006d0
DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
DR6: ffff0ff0 DR7: 00000400
 [<c013274d>] queue_work+0x33/0x3c
 [<f8b2fe73>] ipw_associate+0x109/0x567 [ipw2200]
 [<c0115e6c>] smp_apic_timer_interrupt+0x71/0x7d
 [<c0104980>] apic_timer_interrupt+0x28/0x30
 [<f8b30574>] ipw_bg_associate+0x0/0x27 [ipw2200]
 [<f8b30592>] ipw_bg_associate+0x1e/0x27 [ipw2200]
 [<c013220d>] run_workqueue+0x7d/0x109
 [<c0132a83>] worker_thread+0x0/0xc5
 [<c0132b3d>] worker_thread+0xba/0xc5
 [<c01353f9>] autoremove_wake_function+0x0/0x35
 [<c0135332>] kthread+0x38/0x5e
 [<c01352fa>] kthread+0x0/0x5e
 [<c0104b0f>] kernel_thread_helper+0x7/0x10
 =======================
ipw2200: Firmware error detected.  Restarting.
ADDRCONF(NETDEV_UP): eth1: link is not ready
ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready


If I try to associate my card with the access point I get that in my syslog:
Apr 28 14:21:59 linda kernel: ipw2200: Failed to send SYSTEM_CONFIG: Already sending a command.
Apr 28 14:22:00 linda kernel: ipw2200: Failed to send SYSTEM_CONFIG: Already sending a command.
Apr 28 14:22:03 linda kernel: ipw2200: Failed to send ASSOCIATE: Already sending a command.
Apr 28 14:22:06 linda kernel: ipw2200: Firmware error detected.  Restarting.
Apr 28 14:22:07 linda kernel: ipw2200: Failed to send SYSTEM_CONFIG: Already sending a command.
Apr 28 14:22:19 linda last message repeated 2 times
Apr 28 14:22:19 linda kernel: ipw2200: Failed to send ASSOCIATE: Already sending a command.
Apr 28 14:22:23 linda kernel: ipw2200: Firmware error detected.  Restarting.
Apr 28 14:22:24 linda kernel: ipw2200: Failed to send SYSTEM_CONFIG: Already sending a command.
Apr 28 14:22:55 linda last message repeated 7 times
Apr 28 14:23:27 linda kernel: ipw2200: Failed to send SYSTEM_CONFIG: Already sending a command.
Apr 28 14:23:46 linda kernel: ipw2200: Failed to send ASSOCIATE: Already sending a command.
Apr 28 14:23:54 linda kernel: ipw2200: Firmware error detected.  Restarting.
Apr 28 14:23:55 linda kernel: ipw2200: Failed to send SYSTEM_CONFIG: Already sending a command.
Apr 28 14:23:58 linda kernel: ipw2200: Failed to send ASSOCIATE: Already sending a command.
Apr 28 14:24:05 linda kernel: ipw2200: Firmware error detected.  Restarting.
Apr 28 14:24:15 linda kernel: ipw2200: Failed to send ASSOCIATE: Already sending a command.
Apr 28 14:24:24 linda kernel: ipw2200: Firmware error detected.  Restarting.
Apr 28 14:24:37 linda kernel: ipw2200: Failed to send ASSOCIATE: Already sending a command.
Apr 28 14:25:04 linda kernel: ipw2200: Firmware error detected.  Restarting.
Apr 28 14:25:21 linda kernel: ipw2200: Failed to send ASSOCIATE: Already sending a command.
Apr 28 14:26:29 linda kernel: BUG: soft lockup - CPU#0 stuck for 11s! [ipw2200/0:1447]
Apr 28 14:26:29 linda kernel: 
Apr 28 14:26:29 linda kernel: Pid: 1447, comm: ipw2200/0 Not tainted (2.6.24-1-686 #1)
Apr 28 14:26:29 linda kernel: EIP: 0060:[<c02bdb31>] EFLAGS: 00000246 CPU: 0
Apr 28 14:26:29 linda kernel: EIP is at _spin_unlock_irqrestore+0xa/0x13
Apr 28 14:26:29 linda kernel: EAX: 00000246 EBX: dfa7b734 ECX: 00000246 EDX: 00000200
Apr 28 14:26:29 linda kernel: ESI: dfa7abbc EDI: dfa49f7c EBP: dfa7abbc ESP: dfa49f40
Apr 28 14:26:29 linda kernel:  DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
Apr 28 14:26:29 linda kernel: CR0: 8005003b CR2: b7e83048 CR3: 37f95000 CR4: 000006d0
Apr 28 14:26:29 linda kernel: DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
Apr 28 14:26:29 linda kernel: DR6: ffff0ff0 DR7: 00000400
Apr 28 14:26:29 linda kernel:  [<c013274d>] queue_work+0x33/0x3c
Apr 28 14:26:29 linda kernel:  [<f8b2fe73>] ipw_associate+0x109/0x567 [ipw2200]
Apr 28 14:26:29 linda kernel:  [<c0115e6c>] smp_apic_timer_interrupt+0x71/0x7d
Apr 28 14:26:29 linda kernel:  [<c0104980>] apic_timer_interrupt+0x28/0x30
Apr 28 14:26:29 linda kernel:  [<f8b30574>] ipw_bg_associate+0x0/0x27 [ipw2200]
Apr 28 14:26:29 linda kernel:  [<f8b30592>] ipw_bg_associate+0x1e/0x27 [ipw2200]
Apr 28 14:26:29 linda kernel:  [<c013220d>] run_workqueue+0x7d/0x109
Apr 28 14:26:29 linda kernel:  [<c0132a83>] worker_thread+0x0/0xc5
Apr 28 14:26:29 linda kernel:  [<c0132b3d>] worker_thread+0xba/0xc5
Apr 28 14:26:29 linda kernel:  [<c01353f9>] autoremove_wake_function+0x0/0x35
Apr 28 14:26:29 linda kernel:  [<c0135332>] kthread+0x38/0x5e
Apr 28 14:26:29 linda kernel:  [<c01352fa>] kthread+0x0/0x5e
Apr 28 14:26:29 linda kernel:  [<c0104b0f>] kernel_thread_helper+0x7/0x10
Apr 28 14:26:29 linda kernel:  =======================
Apr 28 14:26:29 linda kernel: ipw2200: Firmware error detected.  Restarting.


# md5sum /lib/firmware/ipw*
bb9b6e2e5522ac13518330d954387f05  /lib/firmware/ipw-2.4-boot.fw
7ef54b582a45da44cfe8604a5d7a4e6d  /lib/firmware/ipw-2.4-bss.fw
99fdbf6d98a9bc3a2084583fe13f07df  /lib/firmware/ipw-2.4-bss_ucode.fw
907d750e7f277088cb7f6169c1c00813  /lib/firmware/ipw-2.4-ibss.fw
07a7d1d4c87e04036845ef6f6fb1b193  /lib/firmware/ipw-2.4-ibss_ucode.fw
b62bdbbf640ede966c8d58e6432d196b  /lib/firmware/ipw-2.4-sniffer.fw
bd1c3ea4da25b64085fc618c5107ed75  /lib/firmware/ipw-2.4-sniffer_ucode.fw
f0216818744e31f769098c7310688e97  /lib/firmware/ipw2200-bss.fw
8bd8a347b63aa732eb36d6b00ab660b4  /lib/firmware/ipw2200-ibss.fw
d57c836007d5245522ddbb030e21749c  /lib/firmware/ipw2200-sniffer.fw

Best regards

-- System Information:
Debian Release: lenny/sid
  APT prefers unstable
  APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: i386 (i686)

Kernel: Linux 2.6.24-1-686 (SMP w/1 CPU core)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8) (ignored: LC_ALL set to fr_FR.UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages ipw2200-source depends on:
ii  bzip2                         1.0.5-0.1  high-quality block-sorting file co
ii  debhelper                     7.0.2      helper programs for debian/rules
ii  make                          3.81-4     The GNU version of the "make" util
ii  module-assistant              0.10.11.0  tool to make module package creati

ipw2200-source recommends no packages.

-- no debconf information

Attachment: signature.asc
Description: Digital signature


--- End Message ---
--- Begin Message --- 
Version: 2.6.25-1

On Fri, Nov 07, 2008 at 09:09:34PM +0100, Moritz Muehlenhoff wrote:
> Hi Gonéri,
> 
> Is this issue still reproducable with the current kernel from
> Lenny?
Hi Moritz,

Sorry, I should have closed the bug since linux-2.6 2.6.25-1.

Best regards,

    Gonéri

Attachment: signature.asc
Description: Digital signature


--- End Message ---
Reply to: